Search Results

Search found 1172 results on 47 pages for 'brain damage'.

Page 19/47 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • AMD Phenom 2 is idling at 50°C, can I get it cooler?

    - by liam
    Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

    Read the article

  • What is Openflow?

    - by jmreicha
    Okay, I've been thinking about this a lot recently but I think I may be more confused now than I was originally when I started. I can't find anything about Openflow that helps me understand what it is. None of the websites I have found have given a solid definition of what Openflow really is and what it does, at least if they do I can't comprehend it. Is there an easy way to explain this standard so my small brain can understand it? I understand that Openflow is a way to abstract networking away from switches and can be managed from software, etc etc. I feel like it might be a little easier to grasp if I had exmaples of application. But so far searching has failed me. What is Openflow? How can it help me? What does it offer?

    Read the article

  • Everything Windows Explorer does hangs up t some time or another

    - by William Barnes
    Yes this is a duplicate of something I have tried to ask in the past. I think I am posting wrong since my first question was deleted OK I ran SCANNOW nd it came back with no problems. I booted in Safe mode and windows evplorer worked OK. I am not sure what that proves. I also ran AUTRUNS and disabled everything that you said, but it still dies. I read someplace that it could be a service program, but I can't find that link anymore. Something about shutting off all non-windows SP's and then start adding back SP's until it quits. The problem is that sometimes it will work, but most of the time it does not. Makes saving or retrieving anything impossible. SAVEAS hangs up, my Garmin Map updater hangs up etc.. I was having this problem before installing Garmin so I am reasonably sure it is not the problem HELP PLEASE, I don't have many brain cells left and can't afford to lose more.

    Read the article

  • Laptop battery: is voltage really important to respect?

    - by Marc-Andre R.
    I got an Acer Aspire 5100 and I just bought a new battery (after the stock battery just died yesterday). But I saw something after buying and I'm wondering whether it's really important or not. My stock battery was a 6-cell 4000mah 11.1v and the new battery is an 8-cell 4800mah 14.8v . I know that 8-cell and 4800mah is okay, but what about the 14.8v instead of 11.1v? The battery description says it's compatible with my laptop model (AS5100, model BL51), but the voltage difference makes me wonder. Will the laptop only take what it needs? Or will it be getting 14.8v straight in the brain? I know that my wall plug claims to output 19v, so logically I'm thinking a higher voltage battery shouldn't be a problem. Am I correct in thinking this? Thanks in advance for your answers!

    Read the article

  • Server only powers (but doesn't POST) when IDE drive is powered

    - by Jookia
    So after a thunderstorm last night which did a little damage, a Gigabyte server has decided it's going on power on but not POST. If it is POSTing, it's doing a very bad job at telling me. No beeps, nothing. Power seems to reach the components though. CD Drive opens and closes. So after stripping it back, I've found that the difference between this behaviour and deciding it's not going to power on for more than half a second, is having a power cable plugged in to one of the IDE hard drives. Is this normal, or a sign that the PSU has had it?

    Read the article

  • How to properly deny Railo directory access through Apache

    - by Sn3akyP3t3
    I've been battle tested on this and failed to achieve my goal which is to deny all access to all directories except the Public directory and only allow access to all all other directories with specific IP addresses. To get Railo+Apache+Tomcat installed I pretty much followed this script: https://github.com/talltroym/Railo-Ubuntu-Installer-Script then verified settings with this tutorial: http://blog.nictunney.com/2012/03/railo-tomcat-and-apache-on-amazon-ec2.html From the installation script these mods are enabled: sudo a2enmod ssl sudo a2enmod proxy sudo a2enmod proxy_http sudo a2enmod rewrite sudo a2ensite default-ssl Outside of the script I copied the sites-available to sites-enabled then reloaded Apache. I have a directory created for Railo cmfl located at /var/www/Railo/ Navigating the browser to http ://Server_IP_Address/Railo forces ssl and relocates to https ://Server_IP_Address/Railo which shows off index.cfm. Not providing index.cfm and omitting https indicates that the DirectoryIndex directive and RewriteCond of Apache appears to be working for the sites-enabled VirtualHost. The problem I'm encountering is that I cannot seem to deny access to all directories except Public. My directory structure is rather simple and looks like this: Railo error Public NotPublic Sandbox These are my sites-enabled configurations: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www #Default Deny All to prevent walking backwards in file system Alias /Railo/ "/var/www/Railo/" <Directory ~ ".*/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html index.cfc RewriteEngine on RewriteCond %{SERVER_PORT} !^443$ RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] </VirtualHost> and <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www Alias /Railo/ "/var/www/Railo/" <Directory ~ "/var/www/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html #Proxy .cfm and cfc requests to Railo ProxyPassMatch ^/(.+.cf[cm])(/.*)?$ http://127.0.0.1:8888/$1 ProxyPassReverse / http://127.0.0.1:8888/ #Deny access to admin except for local clients <Location /railo-context/admin/> Order deny,allow Deny from all # Allow from <Omitted> # Allow from <Omitted> Allow from 127.0.0.1 </Location> </VirtualHost> </IfModule> The apache2.conf includes the following: # Include the virtual host configurations: Include sites-enabled/ <IfModule !mod_jk.c> LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so </IfModule> <IfModule mod_jk.c> JkMount /*.cfm ajp13 JkMount /*.cfc ajp13 JkMount /*.do ajp13 JkMount /*.jsp ajp13 JkMount /*.cfchart ajp13 JkMount /*.cfm/* ajp13 JkMount /*.cfml/* ajp13 # Flex Gateway Mappings # JkMount /flex2gateway/* ajp13 # JkMount /flashservices/gateway/* ajp13 # JkMount /messagebroker/* ajp13 JkMountCopy all JkLogFile /var/log/apache2/mod_jk.log </IfModule> I believe I understand most of this except the jk_module inclusion which I've noticed has an error that shows up in the logs that I can't sort out: [warn] No JkShmFile defined in httpd.conf. Using default /etc/apache2/logs/jk-runtime-status I've checked my Regular expression against the paths of the directories with RegexBuddy just to be sure that I wasn't correct. The problem doesn't appear to be Regex related although I may have something incorrect in the Directory directive. The Location directive seems to be working correctly for blocking out Railo admin site access.

    Read the article

  • How do I restore my system from a "Backup and Restore Center" backup?

    - by Daniel R Hicks
    The Windows (Vista) documentation and available online info is comprehensively vague. If I have a moderately brain dead system and want to restore it, and I have a "Backup and Restore Center" backup whose "delta" is not quite a week old (but with a "full backup" behind it), what steps do I go through to recover my box back to that backup point? It's totally unclear whether simply doing "restore all" from the (advanced) "Center" is sufficient, or do I need to first take the box back to day zero with the system restore DVD, et al? (Just editing this to get my correct ID associated with it.)

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Mexico leading in Business Transformation Strategies:

    - by [email protected]
    By [email protected] on April 15, 2010 8:31 AM By John Burke Group Vice President Oracle Applications Business Unit I recently completed a business tour in Mexico, and was surprised by both the economic vibrancy of the country and the thought leadership expressed by many of the customers I met. An example of the economic vibrancy of the country: across the street from my hotel was the local Bentley dealership, Coach Store, Yves Saint Laurent and of course a Starbucks. I only made it to Starbucks. Both the Coach Store and YSL had a line of folks waiting to get in... As for thought leadership, there were several illustrations only on the first day. I had the opportunity to meet with a branch of the Mexican Federal Government. Their questions were not about clerical task automation, far from it! We discussed citizen on-line access to fees and services - for example looking up the duty on an international goods shipment, or tracking that my taxes have been received, or the status of my request for a certain service. Eligibility, policies and status. Having an integrated rules or policy automation system that would allow businesses and citizens to access accurate information and ensure the proper collection of fees and payment for 3rd party provided services. Then in the afternoon, I met with the owner of a roofing company (note: most roofs in Mexico are flat and made of cement). This CEO started discussing how he wanted to transform his business from a cement products company to a service company and market 5-10-15 year service contracts which would guarantee the structural integrity of the roof and of course that the roof would remain waterproof. Although his products were guaranteed, they required an annual inspection and most home owners never schedule that inspection until it is too late and water damage has occurred. These emergency calls reduce his margin and reduce customer satisfaction. This lead to a discussion of business models in general and why long term differentiation can only come from service, not just for the music or news industries, but also for roofing companies! I completely agreed with the transformational concepts described in both meetings and quickly understood why there is a Bentley dealership near my hotel.

    Read the article

  • On booting my laptop warns me about failure of hard disk is imminent...can it be repaired or to be replaced..?

    - by nrb
    when I am booting my laptop (Lenovo G550) it gives an error message prior to that.. SMART Failure Predicted on Hard Disk O:Hitachi HTS543225l9A300-(PM) Warning : Immediately back up your data and replace your hard disk drive. Afailure may be imminent. Press F1 to continue.. Once it started, it runs smoothly, I also verified its status by running some internal HDD tests by Hard Disk Senitel software..It shows no bad sector , no virus, no damage , normal temperature ... it suggests every thing is OK except its health... Now my question is that then what is the wrong with it..? It may be wrong with plates (dusty) or the read/write heads...then can I go for repair it or replace it...? My system now reminds me every half an hour to resolve this problem since last 10 days... Help me.

    Read the article

  • Top 10 OTN Tech Articles for 2012

    - by Bob Rhubart
    It takes a special kind of IT pro to risk additional carpal tunnel damage to pound out a technical article after spending the day wrestling with a keyboard in dealing with other duties. That kind of dedication is noteworthy, even more so if people actually take the time to read the resulting article. So if you know any of the authors listed below, skip the handshake and give them a congratulatory slap on the back for all that time spent torturing their tendons. Their hard work has earned a place on this list of  the Top 10 most popular OTN articles published in 2012.  Getting Started with Java SE Embedded on the Raspberry Pi by Bill Courington and Gary Collins How Dell Migrated from SUSE Linux to Oracle Linux by Jon Senger, Aik Zu Shyong, and Suzanne Zorn Exploring Oracle SQL Developer by Przemyslaw Piotrowski Getting Started with Oracle Unbreakable Enterprise Kernel Release 2 by Lenz Grimmer How to Get Started (FAST!) with JavaFX 2 and Scene Builder by Mark Heckler How to Use Oracle VM VirtualBox Templates by Yuli Vasiliev How to Update Oracle Solaris 11 Systems From Oracle Support Repositories by Glynn Foster Tips for Hardening an Oracle Linux Server by Lenz Grimmer and James Morris How To Configure Browser-based SSO with Kerberos/SPNEGO and Oracle WebLogic Server by Abhijit Patil How to Create a Local Yum Repository for Oracle Linux by Jared Greenwald Of course, OTN has a great many articles covering a broad range of topics of interest to Java developers, DBAs, sysadmins, solution architects, and everybody else who works keeping the IT world running. You'll find them here. If you have suggestions for topics or technologies you'd like to see covered, please let us know. And if you have insight and expertise to share, why not write your own article? Click here to learn how to get published on OTN.

    Read the article

  • Great Debugging skills weak problem solving

    - by Mahmoud
    For the 5 years I worked for various companies, I worked in large software like computer vision kits, embedded, games. I found myself very good at debuggins skills, I've even found and fixed bugs in frameworks and I solved them. The problem is that I'm very weak at problem solving. I got interview with Qualcomm, and they said you're fine at software, but you have a limited problem solving, I also had the same results with Google. I'm very bad at solving puzzles and brain teasers. During the interviews I solve all of the software related problems on the blackboard, but when I went to the GM and face math problems and probabilities, I struggle. How can I improve my problem solving skills? Edit Some of the problems: A cake that is cut from anywhere and needs just one cut to halved in equal. I told him cut it horizontally, he said No, consider it as a 2D Problem!. Consider a concenteric 3 circles, each one can get a color, but not matched with the other circle, how many blobs you can make out of those circles ? this was with the GM ( Augmented Reality SDK) Consider a train, an infinite one, and you looked at the window, and there are two cars, one big, and one small, what is the probability of having only a big car, I said 50%, he said, what if that two cars you dont know their length, and you want to get the probability of getting the biggest one, I struggled, didn't solve it... I was really exahusted after long day of interviews prob of having a number divisible by 5 in numbers from 1 to 100.. struggled!! All coding questions I solved them like reverse a string, detect a cycle in a linked list,..etc.

    Read the article

  • Protect me from this perl syn flood script [closed]

    - by Luka
    Possible Duplicate: How to best defend against a “slowloris” DOS attack against an Apache web server? As everybody here I was interested in hacking in a period of time, using a perl scripts. CSF is protecting me from every perl script which can make damage. But not from this one here: http://pastebin.com/CfRiSVkQ It's Syn Flood script, when I attack my dedicated server from another dedicated with 100MBPS link csf is detecting the attack and he always block attackers address but I am flooded and sites are down, I get email from csf, but attack is still damaging sites! Then I need to restart httpd, csf and sites are online again...

    Read the article

  • Reinstall after a Root Compromise?

    - by Zoredache
    After reading this question on a server compromise, I started to wonder why people continue to seem to believe that they can recover a compromised system using detection/cleanup tools, or by just fixing the hole that was used to compromise the system. Given all the various root kit technologies and other things a hacker can do most experts suggest you should reinstall the operating system. I am hoping to get a better idea why more people don't just take off and nuke the system from orbit. Here are a couple points, that I would like to see addressed. Are there conditions where a format/reinstall would not clean the system? Under what types conditions do you think a system can be cleaned, and when must you do a full reinstall? What reasoning do you have against doing a full reinstall? If you choose not to reinstall, then what method do you use to be reasonably confident you have cleaned and prevented any further damage from happening again.

    Read the article

  • Are books on programming hard to understand?

    - by DarkEnergy
    I've been reading books that are extremely daunting. Accelerated C++ is by far one of the books -- that I haven't finished. I plan too, but that's another story. When reading a programming book, do you find yourself re reading a lot of the paragraphs? Sometimes it takes me like an hour to read 20 pages out of a book. Sometimes they become so daunting that it takes me all day to finish a single chapter. I think having these as e-books makes them even harder to read sometimes, since I'm so used to looking down to read a book or just looking at tangible paper. IDK, just wanting to know if reading these books becomes extremely hard, and do you find yourself rereading the most simplest paragraphs 2-3 times just to get the meaning of it because the previous paragraph left your brain hurting? http://www.it-career-coach.net/2007/03/04/are-computer-programming-books-hard-to-study/ here is a article i read on something similar to this. edit sometimes I find myself reading a whole page... then I look up and say 'wth did I just read'... I could finish a chapter in 30 minutes to an hour and feel this way too...

    Read the article

  • AceCypher is an Addictive Cypher Slide Puzzle Game

    - by Akemi Iwaya
    Are you ready for a game that will test your logical thinking skills while providing hours of fun? Then you may want to have a look at this awesome cypher slide puzzler! AceCypher is great puzzle game for those times when you only have a few minutes to play or want a fun way to pass the time while relaxing. The overall premise and style of game play for AceCypher is simple. You move individual rows (left, right) or columns (up, down) one space at a time in order to shift the positions of numbers on the game board through ’round-a-bout’ trading. The goal is to make the four numbers in the red square match the code shown in the upper right corner (including positions). Sounds simple so far, right? But the challenge comes from the random boards you will be given to work with…some will not be too hard to solve while others will tax your brain (and patience!) quite well.     

    Read the article

  • Cannot see http (apache) server outside home network

    - by user165155
    Ive been racking my brain with this all evening. Power went out with a tstorm today, started back up my server... running apache and a team speak server on it. TS is great, cant see my web page outside my network! Firewall is disabled on the pc running it (centos btw), apache is running and working. correct ports are forwarded on my router (my isp blocks port 80). Ive tried changing ports, pretty much everything i can think of. httpd.conf is pointing to the correct addy and port, and my domain is pointing to the correct external ip. Im at a loss, any ideas out there?

    Read the article

  • If a managed network switch were to overheat, would you consider it no longer reliable?

    - by Scott Szretter
    Here is the scenario - I have a network switch, one of several in a stack. It's fan failed. Soon, there were reports of users with network issues. After quickly replacing the fan, the users were fine, network issues were resolved. I assume the unit was overheating, and thus failing somehow. Today someone suggested to me, that I should not assume the unit is 100% reliable anymore. So what do you think, would an overheat condition (less than 1 day with the fan stopped) potentially cause permanent damage that could at some point come to the surface as future network failures/issues? If it matters, we are talking managed switches such as 3Com/HP SuperStack , ProCurve or PWR-Plus.

    Read the article

  • Does waterfall require code complete before QA steps in?

    - by P.Brian.Mackey
    The process used at a certain company consists of: Create a layout according to some designs made in a web page design tool. (CSS, html) Requirements come in with "functional requirements". These consist of 100's of lines of business directions. E.G. Create a Table on page X. Column1 has numeric data. Column1 is the client code. Column2 is a string...etc. Write code to meet all functional requirements. When all code is checked in, send to QA (which is the BA that wrote the requirements) for inspection, bug finds and change requests. Punt back to developer with a list of X bugs and Y change requests. While bug finds or change requests 0 go to step 4. The agile development environments I have worked in allow, if not demand, early QA inspection and early user acceptance. So, pieces of the program can be refined and redefined before the entire application is in place. Not only that, but the process leaves little room for error or people changing their minds. Instead, those "change requests" come in at the last stage when they do the most damage. And being that a bug-fix's cost increases over time, this is a costly way to write code. I am no waterfall expert. As described, is this waterfall being mishandled in some way? How does waterfall address my concerns?

    Read the article

  • Interfaces, Adapters, exposing business objects via WCF design

    - by Onam
    I know there have been countless discussions about this but I think this question is slightly different and may perhaps prompt a heated discussion (lets keep it friendly). The scene: I am developing a system as a means for me to learn various concepts and I came across a predicament which my brain is conflicting with. That is whether to keep my interfaces in a separate class library or should they live side by side my business objects. I want to expose certain objects via WCF, however refuse to expose them in its entirety. I am sure most will agree exposing properties such as IDs and other properties is not good practice but also I don't want to have my business objects decorated with attributes. The question: Essentially, I'll be having a separate interface for each of my objects that will essentially be exposed to the outside world (could end up being quite a few) so does it make sense to create a separate class library for interfaces? This also brings up the question of whether adapters should live in a separate class library too as ideally I want a mechanism from transferring from one object to the other and vice versa?

    Read the article

  • How to filter a mysql database with user input on a website and then spit the filtered table back to the website? [migrated]

    - by Luke
    I've been researching this on google for literally 3 weeks, racking my brain and still not quite finding anything. I can't believe this is so elusive. (I'm a complete beginner so if my terminology sounds stupid then that's why.) I have a database in mysql/phpmyadmin on my web host. I'm trying to create a front end that will allow a user to specify criteria for querying the database in a way that they don't have to know sql, basically just combo boxes and checkboxes on a form. Then have this form 'submit' a query to the database, and show the filtered tables. This is how the SQL looks in Microsoft Access: PARAMETERS TEXTINPUT1 Text ( 255 ), NUMBERINPUT1 IEEEDouble; // pops up a list of parameters for the user to input SELECT DISTINCT Table1.Column1, Table1.Column2, Table1.Column3,* // selects only the unique rows in these three columns FROM Table1 // the table where this query is happening WHERE (((Table1.Column1) Like TEXTINPUT1] AND ((Table1.Column2)<=[NUMBERINPUT1] AND ((Table1.Column3)>=[NUMBERINPUT1])); // the criteria for the filter, it's comparing the user input parameters to the data in the rows and only selecting matches according to the equal sign, or greater than + equal sign, or less than + equal sign What I don't get: WHAT IN THE WORLD AM I SUPPOSED TO USE (that isn't totally hard)!? I've tried google fusion tables - doesn't filter right with numerical data or empty cells in rows, can't relate tables I've tried DataTables.net, can't filter right with numerical data and can't use SQL without a bunch of indepth knowledge, not even sure it can if you have that.. I've looked into using jQuery with google spreadsheets, doesn't work at all either I have no idea how I'm supposed to build a front end with my database. Every place that looks promising (like zohocreator) is asking for money, and is far too simplified to be able to do the LIKE criteria or SELECT DISTINCT stuff.

    Read the article

  • Repairing The Visual Studio 2012 UI

    - by Ken Cox [MVP]
    I have sympathy for ‘Softies who don’t like the controversial ‘Metro’ UI changes but are afraid to say so. After all, who wants to commit a CLM (Career-Limiting Move) by declaring that the Emperor has no clothes (or gradients) and that ALL CAPS IN MENUS ARE DUMB? Talk about power! Here’s a higher-up (anyone got a name?) who has enforced a flat, monochrome, uninteresting user interface in Visual Studio 2012  that has been damned with faint praise by consumers. The pushback must have been enormous. Some ‘Softies disengage from the raging debate with, “It’s not my decision” while others feebly point out that the addition of some colour pixels in the icons is a real improvement over the beta version. True, I guess. With the UI pretty much locked, its down to repairing the damage. Fortunately, some Empire dissident has leaked the news to a blogger that  those SHOUTING CAPs aren’t hardcoded afterall: How To Prevent Visual Studio 2012 ALL CAPS Menus And so it goes. By RTM, I’m sure there will be many more add-ons to help us ‘de-Metro’ VS 2012 and recreate our favourite Visual Studio 2010 themes for it.

    Read the article

  • #altnetseattle &ndash; Collaboration, Why is it so hard!

    - by GeekAgilistMercenary
    The session convened and we began a discussion about why collaboration is so hard. To work together in software better us engineers have to overcome traditional software approaches (silos of work) and the human element of tending to go off in a corner to work through an issue. It was agreed upon that software engineers are jack asses of jack assery. Breaking down the stoic & silent types by presenting a continuous enthusiasm until the stoic and silent types break down and open up to the group.  Knowing it is ok to ask the dumb question or work through basic things once in a while. Non-work interactions are pivotal to work related collaboration. Collaboration is mostly autonomous of process (i.e. Agile or Waterfall) Latency time should be minimal in the feedback loop for software development. Collaboration is enhanced by Agile Ideals, and things like Scrum or Lean Process. Agile is not a process, Lean and Scrum are process.  Agile is an ideal. Lean, Agile, Scrum, Waterfall, Six Sigma, CMMI, oh dear. . . Great session.  Off to the next session and more brain crunching. . . weeeeeeee!

    Read the article

  • Laptop battery: is voltage really important to respect?

    - by Fox
    I got an Acer Aspire 5100 and I just bought a new battery (after the stock battery just died yesterday). But I saw something after buying and I'm wondering whether it's really important or not. My stock battery was a 6-cell 4000mah 11.1v and the new battery is an 8-cell 4800mah 14.8v . I know that 8-cell and 4800mah is okay, but what about the 14.8v instead of 11.1v? The battery description says it's compatible with my laptop model (AS5100, model BL51), but the voltage difference makes me wonder. Will the laptop only take what it needs? Or will it be getting 14.8v straight in the brain? I know that my wall plug claims to output 19v, so logically I'm thinking a higher voltage battery shouldn't be a problem. Am I correct in thinking this? Thanks in advance for your answers!

    Read the article

  • Why do browsers have so many possible exploits?

    - by Beau Martínez
    When browsing I am ocassionally given warnings about pages that host malware "that could damage my computer". I am seriously perplexed as to why, in 2010, browsers still have possible exploits and can be cracked. My question is "Why?". I'm assuming it's because of the quick development that occured in the browser wars which were unsufficiently tested, but I'm unsure. Surely WebKit would have patched all the issues in KHTML, or Gecko sorted out the flaws in Netscape's engine, and the IE coders sorted through their codebase to eliminate possible flaws? (Somewhat related: http://superuser.com/questions/117770/which-browser-is-the-most-secure-research-and-practically-based.)

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >