Search Results

Search found 18892 results on 756 pages for 'display'.

Page 19/756 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Calibrating Displays in Boot Camp 3.0 on MacBook with external display

    - by Brian Reiter
    The LED display on my MacBook Pro is very blue-ish without correction. In OS X the advanced mode of the display color calibration tool is excellent and I can largely color-correct the display. Windows 7 incorporates a color calibration tool but it is less powerful. It largely consists of a software gamma correction tool and color charts to use with the hardware controls on your display (which don't exist on a notebook or an apple external display). How can I color-correct Windows in Boot Camp to match the OS X correction without using a Spyder or other special calibration hardware?

    Read the article

  • ATI Radeon HD 5970 Display numbering issues

    - by Arindam Sen
    I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • Display a JSON-string as a table

    - by Martin Aleksander
    I'm totally new to JSON, and have a json-string I need to display as a user-friendly table. I have this file, http://ish.tek.no/json_top_content.php?project_id=11&period=week, witch is showing ID-numbers for products (title) and the number of views. The Title-ID should be connected to this file; http://api.prisguide.no/export/product.php?id=158200 so I can get a table like this: ID | Product Name | Views 158200 | Samsung Galaxy SIII | 21049 How can I do this?

    Read the article

  • Display only visits referred from a Google Adwords campain

    - by Adjam
    I want to only display visits to my site which were sent by my Google Adwords campain preferably in the Visitors overview page. I've tried filtering with 'Advanced Segments' but when I select "Paid Search Traffic" visits goes down to zero. But I do know that most of my visitors at the moment are being sent from Google Adwords. In this question the answer (which was not chosen) suggested adding a HTTP GET request or an URL shortener, but surly there is a way to do it in Analytics?

    Read the article

  • How to select display to record in recordmydesktop

    - by Tom
    I have a dual monitor setup and wish to only record the 1st monitor with recordmydesktop, but I am unsure of the settings when doing it via the command line, so far I have this: recordmydesktop --display=1 --width=1920 height=1080 --fps=15 --no-sound --delay=10 But I get this error message: Cannot connect to X server 1 How do I find the right X server to connect to and are the rest of my settings correct? I'm using 11.04, cheers.

    Read the article

  • SAPPHIRE HD 7770 no audio on HDMI TV display

    - by zeroconf
    I have SAPPHIRE HD 7770 and cannot get work audio over HDMI. http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&lid=1&pid=1452&leg=0 I use Ubuntu 12.04 LTS 64-bit version with all current updates. I tried at /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" ... it didn't help. It's probably I use proprietary driver -this seems to be open source driver. I use the driver, what jockey-gtk (additional drivers) offered me: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER <---- I installed that one ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) So - I installed the first one, because installing second version failed. Everything went fine but no sound at TV display by HDMI. Even Gnome sound mixer doesn't show HDMI choice. Using 32" Samsung B530 LCD TV - http://www.lcdbesttv.com/2010/02/samsung-b530-series-lcd-tv/ I have Asus P8Z77-M motherboard - http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77M/ - there is also HDMI integrated. When I put HDMI cord to that plug, then even Gnome sound mixer showed HDMI audio but it didn't work. I have set from BIOS, that I use that SAPPHIRE HD 7770 from PCIe. My lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09) 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

    Read the article

  • Lookup table display methods

    - by DAXShekhar
    public static client str lookupTableDisplayMethod(str _tableId) {     SysDictTable        dictTable   = new SysDictTable(str2int(_tableId));     ListEnumerator      enum;     Map                 map         = new Map(Types::String, Types::String);     ;     if (dictTable &&         dictTable.rights() > AccessType::NoAccess)     {         enum = dictTable.getListOfDisplayMethods().getEnumerator();         while (enum.moveNext())         {             map.insert(enum.current(), enum.current());         }     }     return pickList(map, "Display method", tableid2pname(_tableId)); }

    Read the article

  • how to display list of partition under 'Go' menu

    - by Roy
    I'm installing ubuntu 12.04 on my asus A43S notebook, but couldn't see any other partition under the 'Go' menu. I tried 'sudo fdisk -l' seems fine, it displays all partition. I also installed ubuntu 12.04 on my PC but there were no problems, all partition are listed under the 'Go' menu, and automaticly mounted when I clicked on them. question is, how to display all partition just like on my PC does, I don't want to mount via terminal each time I need to access them. thanks.

    Read the article

  • Second Monitor Unable to Display at any Resolution

    - by Ryan Sharp
    After connecting the second monitor, the only way to get it to work is with 'mirror', which isn't what I want it for. If I select a display resolution for it, I get the following error: requested position/size for CRTC 148 is outside the allowed limit: position=(1908, 0), size=(1024, 768), maximum=(1920, 1920) I'm on 12.04, with AMD HD Radeon 6950, Post-update drivers. I appreciate anybodies help with this. Thanks.

    Read the article

  • Unity 3D Display Lag

    - by ec2011
    I find that there is quite a lot of lag when using Unity after upgrading to Precise. It seems that when I first start up the computer, everything is fine, but then if I put the computer on standy for a while and then come back to it, the display is extremely slow and there is a significant delay to visual effects that make the system rather cumbersome to use. I tried to report this as a bug but then bug reporting tool directed me to ask this is a question here first. Thanks for any ideas

    Read the article

  • no display when remote Ubuntu 14.04 from windows

    - by user287814
    I'm running Ubuntu 14.04 LTS with xrdp. I followed everything described by the video and the post: https://www.youtube.com/watch?v=KY3V79t5tKA http://www.ubuntututorials.com/remote-desktop-ubuntu-12-04-windows-7/ However, I can establish a connection yet there is no display. What I get is only a screen with random background. I'm wondering anyone got a similar problem. Is it because of the v14.04? Thank you

    Read the article

  • Using native resolution on external display results in stretched, out of bounds image

    - by Roni Yaniv
    I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

    Read the article

  • Changing dual-monitor settings without closing the laptop lid on OS X

    - by hekevintran
    I have a Unibody MacBook hooked up to an external display. By default when I boot up, the system will go to dual-monitor mode. I want to use only the external display. The Apple supplied solution to this problem is to close the lid of the laptop which puts the machine into sleep mode and then move the mouse around to wake it up again. Because the machine is being woken up with the lid closed, when the displays are detected the system finds only the external. After the system is functional again, you can open the lid if you want and the laptop screen will be non-functional until you either tell the system to detect displays from the system preferences or you turn off the external display. Every time I want to use only the external display, I must reach my hand over to close the lid, wait for the machine to sleep, jigger the mouse, wait for the machine to wake up, and finally open the lid again because I don't want the machine to overheat. I feel that this is very stupid to have to do. Why is there no button or menu option that says "don't use this screen"? Is there any third-party software way to change the screen setup that does not involve physically closing the lid and playing a game of "are you sleeping" in order to switch such a simple software setting? We are in the 21st Century and honestly this is childish.

    Read the article

  • Misconfigured external monitor on Mac OS X Snow Leopard 10.6.3

    - by Mike
    I have an external monitor (specifically, an HDTV) hooked up to my 2.53GHz 13" macbook pro. This display works fine and I use it with my mac in clamshell mode (eg. with an external keyboard/mouse and the laptop closed and the built-in mac screen turned off) My Mac has multiple users on it. For User A I can use the mac with the external monitor in both clamshell and dual-monitor setups. For User B, I can use the monitor in a dual-monitor setup, but whenever I switch to clamshell mode the Mac switches to an incorrect output resolution or frequency setting that my HDTV doesn't recognize, resulting in a blank screen and a message about Unsupported Resolution. Chances are I did this to myself by misconfiguring my display settings at some point in the past, but I have no idea how to undo it. I (obviously) can't seen the display to change the settings when it's borked. I can see the display settings if I switch to Dual-monitor mode, but those settings only affect the dual monitor setup; no matter how I change the settings in dual-monitor mode, the clamshell mode setup remains borked. How can I dig myself out of this hole?

    Read the article

  • GUI interfaces to ATI card behave weirdly out of the box and after updates.

    - by jdk
    My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

    Read the article

  • How to stop Vista from auto changing video resolution?

    - by bialix
    I have new Acer Aspire Revo R3600 computer with Vista pre-installed. The computer has NVidia video adapter. While connecting 17" LCD monitor (LG L1742S) via VGA cable it works fine, and I can change the resolution of the display from max 1920*1024 down to some other value, and after reboot the settings are restored correctly. But when I'm connecting bigger full HD 1920*1080 display (LG E2250) via VGA cable then every boot I have the same problem: I see boot progress window, then I see MS logo, then I see welcome screen then I start to see desktop and suddenly monitor switch off and show me the message about unsupported frequency of input signal As I understand Vista tries to auto-change resolution and sets wrong parameters. I've tried to boot into safe mode and into low-resolution mode, every time I have the same problem: Vista boot-up and suddenly monitor stops working. I've tried to connect this monitor to notebook with Windows XP and has no problem to work with this display on its native resolution. How can I disable this display resolution auto-changer in Vista? Or maybe there is another workaround?

    Read the article

  • Conflict between some JavaScript and jQuery on same page

    - by hollyb
    I am using a JavaScript function and some jQuery to perform two actions on a page. The first is a simple JS function to hide/show divs and change the active state of a tab: This is the JS that show/hides divs and changes the active state on some tabs: var ids=new Array('section1','section2','section3'); function switchid(id, el){ hideallids(); showdiv(id); var li = el.parentNode.parentNode.childNodes[0]; while (li) { if (!li.tagName || li.tagName.toLowerCase() != "li") li = li.nextSibling; // skip the text node if (li) { li.className = ""; li = li.nextSibling; } } el.parentNode.className = "active"; } function hideallids(){ //loop through the array and hide each element by id for (var i=0;i<ids.length;i++){ hidediv(ids[i]); } } function hidediv(id) { //safe function to hide an element with a specified id document.getElementById(id).style.display = 'none'; } function showdiv(id) { //safe function to show an element with a specified id document.getElementById(id).style.display = 'block'; } The html: <ul> <li class="active"><a onclick="switchid('section1', this);return false;">ONE</a></li> <li><a onclick="switchid('section2', this);return false;">TWO</a></li> <li><a onclick="switchid('section3', this);return false;">THREE</a></li> </ul> <div id="section1" style="display:block;">TEST</div> <div id="section2" style="display:none;">TEST 2</div> <div id="section3" style="display:none;">TEST 3</div> Now the problem.... I've added the jQuery image gallery called galleria to one of the tabs. The gallery works great when it resides in the div that is intially set to display:block. However, when it is in one of the divs that is set to display: none; part of the gallery doesn't work when the div is toggled to be visible. Specifically, the following css ceases to be written (this is created by galleria jQuery): element.style { display:block; height:50px; margin-left:-17px; width:auto; } For the life of me, I can't figure out why the gallery fails when it's div is set to display: none. Since this declaration is overwritten when a tab is clicked (via the Javascript functions above), why would this cause a problem? As I mentioned, it works perfectly when it lives the in display: block; div. Any ideas? I don't expect anybody to be familiar with the jQuery galleria image gallery... but perhaps an idea of how one might repair this problem? Thanks!

    Read the article

  • Can't get SWT Display on Mac OS X.

    - by Mattias Holmqvist
    I'm running Mac OS X Snow Leopard and wan't to access the Display from the activator in an OSGi bundle. Below is the start method for my activator: @Override public void start(BundleContext context) throws Exception { ExecutorService service = Executors.newSingleThreadExecutor(); service.execute(new Runnable() { @Override public void run() { Display display = Display.getDefault(); Shell shell = new Shell(display); Text helloText = new Text(shell, SWT.CENTER); helloText.setText("Hello SWT!"); helloText.pack(); shell.pack(); shell.open(); while (!shell.isDisposed()) { if (!display.readAndDispatch()) display.sleep(); } display.dispose(); } }); } Calling this code in a Windows environment works fine, but deploying on Mac OS X I get the following output: 2009-10-14 17:17:54.050 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x101620d20 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.081 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x100119240 of class NSCFNumber autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.084 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x1001024b0 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.086 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x7fff701d7f70 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.087 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x100113330 of class NSCFString autoreleased with no pool in place - just leaking 2009-10-14 17:17:54.092 java[2010:10003] *** __NSAutoreleaseNoPool(): Object 0x101624540 of class NSCFData autoreleased with no pool in place - just leaking . . . I've used the -XstartOnFirstThread VM argument without any luck. I'm on 64-bit Cocoa but I've also tried 32-bit Cocoa. When trying on Carbon I get the following error: Invalid memory access of location 00000020 eip=9012337c When debugging into the Display class I can see that the Displays[] array only contains null references.

    Read the article

  • How to quickly switch monitors on multi-monitor setup?

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer?

    Read the article

  • Use xrandr to set the absolute position of the screen?

    - by Eli
    I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

    Read the article

  • How to quickly switch monitors on multi-monitor setup? (W7)

    - by Saxtus
    At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >