dynamic methods - Page 19

Four-color theorem in Prolog (using a dynamic predicate)

- by outa

Hi, I'm working on coloring a map according to the four-color theorem (http://en.wikipedia.org/wiki/Four_color_theorem) with SWI-Prolog. So far my program looks like this: colour(red). colour(blue). map_color(A,B,C) :- colour(A), colour(B), colour(C), C \= B, C \= A. (the actual progam would be more complex, with 4 colors and more fields, but I thought I'd start out with a simple case) Now, I want to avoid double solutions that have the same structure. E.g. for a map with three fields, the solution "red, red, blue" would have the same structure as "blue, blue, red", just with different color names, and I don't want both of them displayed. So I thought I would have a dynamic predicate solution/3, and call assert(solution(A,B,C)) at the end of my map_color predicate. And then, for each solution, check if they already exist as a solution/3 fact. The problem is that I would have to assert something like solution(Color1,Color1,Color2), i.e. with variables in order to make a unification check. And I can't think of a way to achieve this. So, the question is, what is the best way to assert a found solution and then make a unification test so that "red, red, blue" would unify with "blue, blue, red"?

Read the article

[C#] Dynamic user-interface, WPF or not?

- by pieter.lowie

Hi, I'm currently working at a application that helps people understand how to do there job. You can see it as a personal coach that guides them trough all the steps they need to do that no normal person could keep remembering. In my previous application we had the ability to show the user up to 4 pictures (what proves to be more then enough). The application would load the data and see how many pictures where in every instruction and then sort out the picture in the best fitting way without messing up the scale and resolution of the pictures. This all was done with GDI+ and worked very well. Ofc, change is something that always happens, my bosses came up with some great ideas. So they want to be able to see movies on the screen, animated gif's, 3D models that can rotate or animate. So I think we had pushed GDI+ to it's limits and it's time to look for something different. I have heard and readed about WPF but have no experience with it. Is it even possible to do all what I ask in WPF? And what about the old picture-merging thing I wrote, can we also get it done in wpf? I tried to make some things working but I didn't went as smooth as I hoped. I'm also concerned about the fact that the interface needs to be dynamic, the one moment it should be showing picture with some text above it, the other moment it should be showing another text with a video under it. I would love to hear some opinions here and if you got some other suggestions I should look into pls tell me. Thnx in advance PS: If WPF is the choice, should I convince my boss to change to .net 4.0?

Read the article

Dynamic Variable Names in Included Module in Ruby?

- by viatropos

I'm hoping to implement something like all of the great plugins out there for ruby, so that you can do this: acts_as_commentable has_attached_file :avatar But I have one constraint: That helper method can only include a module; it can't define any variables or methods. Here's what the structure looks like, and I'm wondering if you know the missing piece in the puzzle: # 1 - The workhorse, encapsuling all dynamic variables module My::Module def self.included(base) base.extend ClassMethods base.class_eval do include InstanceMethods end end module InstanceMethods self.instance_eval %Q? def #{options[:my_method]} "world!" end ? end module ClassMethods end end # 2 - all this does is define that helper method module HelperModule def self.included(base) base.extend(ClassMethods) end module ClassMethods def dynamic_method(options = {}) include My::Module(options) end end end # 3 - send it to active_record ActiveRecord::Base.send(:include, HelperModule) # 4 - what it looks like class TestClass < ActiveRecord::Base dynamic_method :my_method => "hello" end puts TestClass.new.hello #=> "world!" That %Q? I'm not totally sure how to use, but I'm basically just wanting to somehow be able to pass the options hash from that helper method into the workhorse module. Is that possible? That way, the workhorse module could define all sorts of functionality, but I could name the variables whatever I wanted at runtime.

Read the article

Stopping Filter Display in Dynamic Data Entity Web App

- by bert

I'm currently experimenting with the Dynamic Data Entity Web App Project type in VS2008 SP1 and after reading many tutorials which offer helpful advice for problems I so far have no need of a solution to I have fallen at the first hurdle. In the DB I have made my entity model from I decided to start small with a table called "Companies" just to see if I could tweak the display into a satisfactory shape for this small table. The Companies table has a column called "contactid" which leads to a record filled with various contact information in a "contacts" table. The default created Entity Data Model has guessed that One companies could have many contact records. So it tries to be helpful and add a "Contact" filter onto the page that allows you to see all the Companies that share a particular set of contact info indexed by the "Contact Name" field. Unfortunately the contact table is a multi-purpose one that also stores contact info for customers and there are about 1000 times more customers than there are companies. So the Dropdown makes the page load time increase exponentially and produces no benefit. So I'd like to just stop the filter from appearing. Only problem is I don't have a clue how to switch it off. Google is so far proving recalcitrant on the matter so I wondered if anyone in here knew how to get rid of a useless filter.

Read the article

WinForms Dynamic Label

- by tolga

I am creating dynamic labels and letting users change attributes of the labes like backcolor and so by sending unicode. However I don't know how to check if the label exists therefore I can't manipulate the dynamicly created label. below is my code: if ((InputBox.Text.StartsWith("p")) && (InputBox.Text.EndsWith("}")))// only process if the message starts with p and ends with } { string Message = InputBox.Text; InputBox.Text = "";// Clear the box when done. // Butt1 message line if (Message.StartsWith("plabelt1")) { if (Message.StartsWith("plabelt1_BackColor")) { Message = Message.Substring(19); //labelt1.BackColor = System.Drawing.Color.FromName(Message.Replace("}", "")); } } private void ImageBox_DragDrop(object sender, DragEventArgs e) { //Graphics g = ImageBox.CreateGraphics(); //g.DrawImage((Image)e.Data.GetData(DataFormats.Bitmap), //new Point(e.X - this.Left, e.Y - this.Top - 150)); Point p2 = PointToClient(Cursor.Position); Label buttlbl_ = new Label(); labelCount++; buttlbl_.Name = "labelt" + labelCount.ToString(); buttlbl_.Location = new Point(p2.X, p2.Y); buttlbl_.Size = new System.Drawing.Size(37, 37); buttlbl_.BackColor = System.Drawing.Color.DarkGray; this.Controls.Add(buttlbl_); buttlbl_.BringToFront(); ImageBox.Invalidate(); } } Any suggestions?

Read the article

Dynamic Array of Objects Sans Vector Class

- by Connor Black

I am doing a homework assignment for my summer OO class and we need to write two classes. One is called Sale and the other is called Register. I've written my Sale class; here's the .h file: enum ItemType {BOOK, DVD, SOFTWARE, CREDIT}; class Sale { public: Sale(); // default constructor, // sets numerical member data to 0 void MakeSale(ItemType x, double amt); ItemType Item(); // Returns the type of item in the sale double Price(); // Returns the price of the sale double Tax(); // Returns the amount of tax on the sale double Total(); // Returns the total price of the sale void Display(); // outputs sale info private: double price; // price of item or amount of credit double tax; // amount of sales tax double total; // final price once tax is added in. ItemType item; // transaction type }; For the Register class we need to include a dynamic array of Sale objects in our member data. We cannot use the vector class. How is this done? Here's my 'Register' '.h' class Register{ public: Register(int ident, int amount); ~Register(); int GetID(){return identification;} int GetAmount(){return amountMoney;} void RingUpSale(ItemType item, int basePrice); void ShowLast(); void ShowAll(); void Cancel(); int SalesTax(int n); private: int identification; int amountMoney; };

Read the article

How do I copy/clone a dynamic disk in Windows 7?

- by PP

I have some dynamic disks (or "partitions" but they are not really partitions) that I want to copy onto spare hard drives. I tried using gpartd (and fdisk for that matter) from a linux live disc. All it saw was hard drives with only one partition encasing the whole hard drive. So gpartd/fdisk is incapable of identifying the dynamic "partitions" and allowing me to copy them. Any tools that can be used to clone/copy a dynamic "partition"? (I'm open to commercial software suggestions if they can do the job).

Read the article

Use Dynamic DNS to access Java servlet, still need port forward ?

- by Frank

If I use Dynamic DNS such as the free service at https://www.dyndns.com, do I still need to set up static IP and do port forward ? I have a DSL, most likely with dynamic IP address, and I run a Java servlet to get Paypal IPN messages on my notebook, in order for the messages to reach my notebook, I : [1] set up static IP and [2] did port forwarding. But I found each time the PC re-starts, it has a different external IP, so I was suggested to [3] get Dynamic DNS service like the free one mentioned above, but now I'm a bit confused, if I have step [3], do I still need to do [1] and [2], isn't step [3] supposed to do [1] and [2] for me ? But since I've already done [1],[2], now I wonder if they would cause trouble for step [3], do I need to undo them ? Or do I need all of them together ?

Read the article

How to check the version of the dynamic linker?

- by netvope

If I run a binary compiled on a newer Linux distro on an older Linux distro, I may get an error like this: a.out: error while loading shared libraries: requires glibc 2.5 or later dynamic linker How can I check the version of the dynamic linker in a Linux system? Is it provided by a package? If so, what's the name of the package? And a theoretical question: Is it possible to update the dynamic linker? (I don't think I'm going to do this but I just want to know.)

Read the article

Access a windows dynamic hard drive through a virtual machine on ubuntu?

- by Enigma

I have a Windows 7 OS and am thinking about transitioning to a dual boot set up with Ubuntu 12.04. From what I recall, it is not possible to natively access Dynamic Windows Partitions in a Linux OS. My thought is that it might be possible to have a virtual machine (running windows) installed within Ubuntu access the physical dynamic drive. The problem comes to whether VMWare can access the physical disk "high enough" to be able to mount it within the windows virtual machine as a native device or if it gets passed through from the native Linux OS. This is really the only thing holding me back from switching to a dual-boot set up as the dynamic disk is made up of 4 or 5 hard drives and I would very much like access to the data on both OS's. Alternatively, is there another solution for combining multiple physical hard drives into one virtual hard drive that would be readable on both OS's?

Read the article

Dynamic expression tree how to

- by Savvas Sopiadis

Hello everybody! Implemented a generic repository with several Methods. One of those is this: public IEnumerable<T> Find(Expression<Func<T, bool>> where) { return _objectSet.Where(where); } Given to be it is easy to call this like this: Expression<Func<Culture, bool>> whereClause = c => c.CultureId > 4 ; return cultureRepository.Find(whereClause).AsQueryable(); But now i see (realize) that this kind of quering is "limiting only to one criteria". What i would like to do is this: in the above example c is of type Culture. Culture has several properties like CultureId, Name, Displayname,... How would i express the following: CultureId 4 and Name.contains('de') and in another execution Name.contains('us') and Displayname.contains('ca') and .... Those queries should be created dynamically. I had a look in Expression trees (as i thought this to be a solution to my problem - btw i never used them before) but i cannot find anything which points to my requirement. How can this be costructed? Thanks in advance

Read the article

Dynamic/Generic ViewModelBase?

- by Shimmy

I am learning MVVM now and I understand few things (more than but few are here..): Does every model potentially exposed (thru a VM) to the View is having a VM? For example, if I have a Contact and Address entity and each contact has an Addresses (many) property, does it mean I have to create a ContactViewModel and an AddressViewModel etc.? Do I have to redeclare all the properties of the Model again in the ViewModel (i.e. FirstName, LastName blah blah)? why not have a ViewModelBase and the ContactViewMode will be a subclass of ViewModelBase accessing the Entity's properties itself? and if this is a bad idea that the View has access to the entity (please explain why), then why not have the ViewModelBase be a DynamicObject (view the Dictionary example @ the link page), so I don't have to redeclare all the properties and validation over and over in the two tiers (M & VM) - because really, the View is anyway accessing the ViewModel's fields via reflection anyway. I think MVVM was the hardest technology I've ever learned. it doesn't have out-the-box support and there are to many frameworks and methods to achieve it, and in the other hand there is no arranged way to learn it (as MVC for instance), learning MVVM means browsing and surfing around trying to figure out what's better. Bottom line, what I mean by this section is please go and vote to MSFT to add MVVM support in the BCL and generators for VMs and Vs according to the Ms. Thanks

Read the article

Should we rename overloaded methods?

- by Mik378

Assume an interface containing these methods : Car find(long id); List<Car> find(String model); Is it better to rename them like this? Car findById(long id); List findByModel(String model); Indeed, any developer who use this API won't need to look at the interface for knowing possible arguments of initial find() methods. So my question is more general : What is the benefit of using overloaded methods in code since it reduce readability?

Read the article

WPF Dynamic Layout with ItemsControl and Grid

- by Jason Williams

I am creating a WPF form. One of the requirements is that it have a sector-based layout so that a control can be explicitly placed in one of the sectors/cells. I have created a tic-tac-toe example below to convey my problem: There are two types and one base type: public class XMoveViewModel : MoveViewModel { } public class OMoveViewModel : MoveViewModel { } public class MoveViewModel { public int Row { get; set; } public int Column { get; set; } } The DataContext of the form is set to an instance of: public class MainViewModel : ViewModelBase { public MainViewModel() { Moves = new ObservableCollection<MoveViewModel>() { new XMoveViewModel() { Row = 0, Column = 0 }, new OMoveViewModel() { Row = 1, Column = 0 }, new XMoveViewModel() { Row = 1, Column = 1 }, new OMoveViewModel() { Row = 0, Column = 2 }, new XMoveViewModel() { Row = 2, Column = 2} }; } public ObservableCollection<MoveViewModel> Moves { get; set; } } And finally, the XAML looks like this: <Window.Resources> <DataTemplate DataType="{x:Type vm:XMoveViewModel}"> <Image Source="XMove.png" Grid.Row="{Binding Path=Row}" Grid.Column="{Binding Path=Column}" Stretch="None" /> </DataTemplate> <DataTemplate DataType="{x:Type vm:OMoveViewModel}"> <Image Source="OMove.png" Grid.Row="{Binding Path=Row}" Grid.Column="{Binding Path=Column}" Stretch="None" /> </DataTemplate> </Window.Resources> <Grid> <ItemsControl ItemsSource="{Binding Path=Moves}"> <ItemsControl.ItemsPanel> <ItemsPanelTemplate> <Grid ShowGridLines="True"> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition /> <ColumnDefinition /> <ColumnDefinition /> </Grid.ColumnDefinitions> </Grid> </ItemsPanelTemplate> </ItemsControl.ItemsPanel> </ItemsControl> </Grid> What was not so obvious to me when I started was that the ItemsControl element actually wraps each item in a container, so my Grid.Row and Grid.Column bindings are ignored since the images are not directly contained within the grid. Thus, all of the images are placed in the default Row and Column (0, 0). What is happening: The desired result: So, my question is this: how can I achieve the dynamic placement of my controls in a grid? I would prefer a XAML/Data Binding/MVVM-friendly solution. Thanks.

Read the article

Issue with dynamic array Queue data structure with void pointer

- by Nazgulled

Hi, Maybe there's no way to solve this the way I'd like it but I don't know everything so I better ask... I've implemented a simple Queue with a dynamic array so the user can initialize with whatever number of items it wants. I'm also trying to use a void pointer as to allow any data type, but that's the problem. Here's my code: typedef void * QueueValue; typedef struct sQueueItem { QueueValue value; } QueueItem; typedef struct sQueue { QueueItem *items; int first; int last; int size; int count; } Queue; void queueInitialize(Queue **queue, size_t size) { *queue = xmalloc(sizeof(Queue)); QueueItem *items = xmalloc(sizeof(QueueItem) * size); (*queue)->items = items; (*queue)->first = 0; (*queue)->last = 0; (*queue)->size = size; (*queue)->count = 0; } Bool queuePush(Queue * const queue, QueueValue value, size_t val_sz) { if(isNull(queue) || isFull(queue)) return FALSE; queue->items[queue->last].value = xmalloc(val_sz); memcpy(queue->items[queue->last].value, value, val_sz); queue->last = (queue->last+1) % queue->size; queue->count += 1; return TRUE; } Bool queuePop(Queue * const queue, QueueValue *value) { if(isEmpty(queue)) return FALSE; *value = queue->items[queue->first].value; free(queue->items[queue->first].value); queue->first = (queue->first+1) % queue->size; queue->count -= 1; return TRUE; } The problem lies on the queuePop function. When I call it, I lose the value because I free it right away. I can't seem to solve this dilemma. I want my library to be generic and modular. The user should not care about allocating and freeing memory, that's the library's job. How can the user still get the value from queuePop and let the library handle all memory allocs/frees?

Read the article

jQuery: load refuses to get dynamic content in IE6

- by user260157

jQuery refuses to load my dynamic content in IE6. All in FireFox & Safari works fine. Only IE6 is being a pain. When I try the a html with <p>Hello World</p> that works. Properly. But when loading a PHP it doesn't work! As you can see it's doing multiple things. <script type="text/javascript"> // When the document is ready set up our sortable with it's inherant function(s) $(document).ready(function() { // Sort list & amend in database function sortTableMenuAndReload() { var order = $('#menuList').sortable('serialize'); $.post("PLUGINS/SortableMenu/process-sortable.php",order); $("#menuList").load("PLUGINS/SortableMenu/sortableMenu_ajax.php"); } function sortTableOrder() { var order = $('#menuList').sortable('serialize'); $.post("PLUGINS/SortableMenu/process-sortable.php",order); } function sortTableOrderAndRemove(removeID) { $('#listItem_'+removeID).remove(); var order = $('#menuList').sortable('serialize'); $.post("PLUGINS/SortableMenu/process-sortable.php",order); $("#menuList").load("PLUGINS/SortableMenu/sortableMenu_ajax.php"); } $("#menuList > li > .remove").live('click', function () { var removeID = $(this).attr('id'); $.ajax({ type: 'post', url: 'PLUGINS/SortableMenu/removeLine.php', data: 'id='+removeID, success: sortTableOrderAndRemove(removeID) }); }); $("#menuList > li > .publish").live('click', function () { var publishID = $(this).attr('id'); $.ajax({ type: 'post', url: 'PLUGINS/SortableMenu/publishLine.php', data: 'id='+publishID, success: sortTableOrder }); }); $('#new_documents > li').draggable({ addClasses: false, helper:'clone', connectToSortable:'#menuList' }); $("#menuList").droppable({ addClasses: false, drop: function() { var clone = $("#menuList > li#newArticleTYPE1"); $(clone).attr("id","listItem_newArticleTYPE1"); } }); $("#menuList").sortable({ opacity: 0.6, handle : '.handle, .remove', update : sortTableMenuAndReload }); }); </script>

Read the article

Dynamic SQL To Dynamic LINQ in VB.NET with MS SQL Server 2008

- by user337501

I dread asking this question, because with what I've read so far I understand im gonna have to cram a lotta new things into my head. In spite of all the similiar questions(and the wide variety of answers) I thought I'd ask as nothing I've read tailors to what I need specifically enough. I need to represent the following query using LINQ: DECLARE @PurchasedInventoryItemID Int = 2 DECLARE @PurchasedInventorySectionID Int = 0 DECLARE @PurchasedInventoryItem_PurchasingCategoryID Int = 3 DECLARE @PurchasedInventorySection_PurchasingCategoryID Int = 0 DECLARE @IsActive Bit = 1 DECLARE @PropertyID Int = 2 DECLARE @PropertyValue nvarchar(1000) = 'Granny Smith' --Property1, Property2, Property3 ... SELECT O.PurchasedInventoryObjectID, O.PurchasedInventoryObjectName, O.PurchasedInventoryConjunctionID, O.Summary, O.Count, O.PropertyCount, O.IsActive FROM tblPurchasedInventoryObject As O INNER JOIN tblPurchasedInventoryConjunction As C ON C.PurchasedInventoryConjunctionID = O.PurchasedInventoryConjunctionID INNER JOIN tblPurchasedInventoryItem As I ON I.PurchasedInventoryItemID = C.PurchasedInventoryItemID INNER JOIN tblPurchasedInventorySection As S ON S.PurchasedInventorySectionID = C.PurchasedInventorySectionID INNER JOIN tblPurchasedInventoryPropertyMap as M ON M.PurchasedInventoryObjectID = O.PurchasedInventoryObjectID INNER JOIN tblPropertyValue As V ON V.PropertyValueID = M.PropertyValueID WHERE I.PurchasedInventoryItemID = @PurchasedInventoryItemID AND S.PurchasedInventorySectionID = @PurchasedInventorySectionID AND I.PurchasingCategoryID = @PurchasedInventoryItem_PurchasingCategoryID AND S.PurchasingCategoryID = @PurchasedInventorySection_PurchasingCategoryID AND O.IsActive = @IsActive AND V.PropertyID = @PropertyID AND V.Value = @PropertyValue Now, I know that a query in .NET doesnt look like this, this is my test in the SQL Design Studio. Naturally VB.NET variables will be used in place of the SQL local variables. My problem is this: All of the conditions after "WHERE" are optional. In that a query might be made that uses one, some, all, or none of the conditions. V.PropertyID and V.Value can also appear any number of times. In VB.NET I can make this query easy enough by simply concatenating strings, and using a loop to append the "V.PropertyID/V.Value" conditions. I can also make a Stored Procedure in MS SQL, which is easy enough. However, I want to accomplish this using LINQ. If anyone could direct me, I would be most appreciative.

Read the article

Dynamic order by without using dynamic sql ?

- by Rohit

I have the following stored procedure which can be sorted ascending and descending on TemplateName,CreatedOn and UploadedBy. The following SP when runs doesnot sort records.if i replace 2,3,4 by columnname, i got an error message "Conversion failed when converting the nvarchar value 'Test Template' to data type int.".Please suggest how to achieve sorting. CREATE PROCEDURE [dbo].[usp_SEL_GetRenderingTemplate] ( @facilityID INT, @sortOrder VARCHAR(5), @sortExpression VARCHAR(100), @errorCode INT OUTPUT ) AS BEGIN SET NOCOUNT ON ; BEGIN TRY SET @sortOrder = CASE @sortOrder WHEN 'Ascending' THEN 'ASC' WHEN 'Descending' THEN 'DESC' ELSE 'ASC' END SELECT TemplateID, TemplateName, CreatedOn, ( [user].LastName + ' ' + [user].FirstName ) AS UploadedBy FROM Templates INNER JOIN [user] ON [user].UserID = Templates.CreatedBy WHERE facilityid = @facilityID ORDER BY CASE WHEN @sortExpression = 'TemplateName' AND @sortOrder = 'ASC' THEN 2 WHEN @sortExpression = 'CreatedOn' AND @sortOrder = 'ASC' THEN 3 WHEN @sortExpression = 'UploadedBy' AND @sortOrder = 'ASC' THEN 4 END ASC, CASE WHEN @sortExpression = 'TemplateName' AND @sortOrder = 'DESC' THEN 2 WHEN @sortExpression = 'CreatedOn' AND @sortOrder = 'DESC' THEN 3 WHEN @sortExpression = 'UploadedBy' AND @sortOrder = 'DESC' THEN 4 END DESC SET @errorCode = 0 END TRY BEGIN CATCH SET @errorCode = -1 DECLARE @errorMsg AS VARCHAR(MAX) DECLARE @utcDate AS DATETIME SET @errorMsg = CAST(ERROR_MESSAGE() AS VARCHAR(MAX)) SET @utcDate = CAST(GETUTCDATE() AS DATETIME) EXEC usp_INS_LogException 'usp_SEL_GetFacilityWorkTypeList', @errorMsg, @utcDate END CATCH END

Read the article

finding numbers of days between two date to make a dynamic columns

- by Chandradyani

Dear all, I have a select query that currently produces the following results: DoctorName Team 1 2 3 4 5 6 7 ... 31 Visited dr. As A x x ... 2 times dr. Sc A x ... 1 times dr. Gh B x ... 1 times dr. Nd C ... x 1 times Using the following query: DECLARE @startDate = '1/1/2010', @enddate = '1/31/2010' SELECT d.doctorname, t.teamname, MAX(CASE WHEN ca.visitdate = 1 THEN 'x' ELSE NULL END) AS 1, MAX(CASE WHEN ca.visitdate = 2 THEN 'x' ELSE NULL END) AS 2, MAX(CASE WHEN ca.visitdate = 3 THEN 'x' ELSE NULL END) AS 3, ... MAX(CASE WHEN ca.visitdate = 31 THEN 'x' ELSE NULL END) AS 31, COUNT(*) AS visited FROM CACTIVITY ca JOIN DOCTOR d ON d.id = ca.doctorid JOIN TEAM t ON t.id = ca.teamid WHERE ca.visitdate BETWEEN @startdate AND @enddate GROUP BY d.doctorname, t.teamname the problem is I want to make the column of date are dynamic for example if ca.visitdate BETWEEN '2/1/2012' AND '2/29/2012' so the result will be : DoctorName Team 1 2 3 4 5 6 7 ... 29 Visited dr. As A x x ... 2 times dr. Sc A x ... 1 times dr. Gh B x ... 1 times dr. Nd C ... x 1 times Can somebody help me how to get numbers of days between two date and help me revised the query so it can looping MAX(CASE WHEN ca.visitdate = 1 THEN 'x' ELSE NULL END) AS 1 as many as numbers of days? Please please

Read the article

Javascript: Make a static code, dynamic - List of inputs

- by BoDiE2003

I have this code, that checks some ids and enable others, the javascript is pretty clear about what it does, but since it corresponds to some specific id ranges, I cant do just a look until it finishes, but I'm looking a way to do this dynamic and save 40 lines of code (or more), since its not the best way. function loopGroup1() { var a = 0; do { $$('.selectedAuthorities-3_' + a).each(function(chk1) { // watch for clicks chk1.observe('click', function(evt) { dynamicCheckbox1(); }); dynamicCheckbox1(); }); a++; } while (a < 4); } function dynamicCheckbox1() { // count how many of group_first are checked, // doEnable true if any are checked var doEnable = ($$('.selectedAuthorities-3_0:checked').length > 0) ? true : false; var doEnable1 = ($$('.selectedAuthorities-3_1:checked').length > 0) ? true : false; var doEnable2 = ($$('.selectedAuthorities-3_2:checked').length > 0) ? true : false; // for each in group_second, enable the checkbox, and // remove the cssDisabled class from the parent label var i = 0; do { $$('.selectedAuthorities-4_' + i).each(function(item) { if (doEnable || doEnable1 || doEnable2) { item.enable().up('li').removeClassName('cssDisabled'); } else { item.disable().up('li').addClassName('cssDisabled'); } }); i++; } while (i < 4); }; /* * * Loop Group 2 * * */ function loopGroup2() { var a = 0; do { $$('.selectedAuthorities-5_' + a).each(function(chk1) { // watch for clicks chk1.observe('click', function(evt) { dynamicCheckbox2(); }); dynamicCheckbox2(); }); a++; } while (a < 4); } function dynamicCheckbox2() { // count how many of group_first are checked, // doEnable true if any are checked var doEnable3 = ($$('.selectedAuthorities-5_0:checked').length > 0) ? true : false; // for each in group_second, enable the checkbox, and // remove the cssDisabled class from the parent label var i = 0; do { $$('.selectedAuthorities-6_' + i).each(function(item) { if (doEnable3) { item.enable().up('li').removeClassName('cssDisabled'); } else { item.disable().up('li').addClassName('cssDisabled'); } }); i++; } while (i < 4); }; /* * * Loop Group 3 * * */ function loopGroup3() { var a = 0; do { $$('.selectedAuthorities-6_' + a).each(function(chk1) { // watch for clicks chk1.observe('click', function(evt) { dynamicCheckbox3(); }); dynamicCheckbox3(); }); a++; } while (a < 4); } function dynamicCheckbox3() { // count how many of group_first are checked, // doEnable true if any are checked var doEnable4 = ($$('.selectedAuthorities-6_0:checked').length > 0) ? true : false; var doEnable5 = ($$('.selectedAuthorities-6_1:checked').length > 0) ? true : false; // for each in group_second, enable the checkbox, and // remove the cssDisabled class from the parent label var i = 0; do { $$('.selectedAuthorities-7_' + i).each(function(item) { if (doEnable4 || doEnable5) { item.enable().up('li').removeClassName('cssDisabled'); } else { item.disable().up('li').addClassName('cssDisabled'); } }); i++; } while (i < 4); }; /* * * Loop Group 4 * * */ function loopGroup4() { var a = 0; do { $$('.selectedAuthorities-9_' + a).each(function(chk1) { // watch for clicks chk1.observe('click', function(evt) { dynamicCheckbox4(); }); dynamicCheckbox4(); }); a++; } while (a < 4); } function dynamicCheckbox4() { // count how many of group_first are checked, // doEnable true if any are checked var doEnable6 = ($$('.selectedAuthorities-9_0:checked').length > 0) ? true : false; var doEnable7 = ($$('.selectedAuthorities-9_1:checked').length > 0) ? true : false; // for each in group_second, enable the checkbox, and // remove the cssDisabled class from the parent label var i = 0; do { $$('.selectedAuthorities-10_' + i).each(function(item) { if (doEnable6 || doEnable7) { item.enable().up('li').removeClassName('cssDisabled'); } else { item.disable().up('li').addClassName('cssDisabled'); } }); i++; } while (i < 4); };

Read the article

Dynamic parameters for XSLT 2.0 group-by

- by Ophileon

I got this input <?xml version="1.0" encoding="UTF-8"?> <result> <datapoint poiid="2492" period="2004" value="1240"/> <datapoint poiid="2492" period="2005" value="1290"/> <datapoint poiid="2492" period="2006" value="1280"/> <datapoint poiid="2492" period="2007" value="1320"/> <datapoint poiid="2492" period="2008" value="1330"/> <datapoint poiid="2492" period="2009" value="1340"/> <datapoint poiid="2492" period="2010" value="1340"/> <datapoint poiid="2492" period="2011" value="1335"/> <datapoint poiid="2493" period="2004" value="1120"/> <datapoint poiid="2493" period="2005" value="1120"/> <datapoint poiid="2493" period="2006" value="1100"/> <datapoint poiid="2493" period="2007" value="1100"/> <datapoint poiid="2493" period="2008" value="1100"/> <datapoint poiid="2493" period="2009" value="1110"/> <datapoint poiid="2493" period="2010" value="1105"/> <datapoint poiid="2493" period="2011" value="1105"/> </result> and I use this xslt 2.0 <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs" version="2.0"> <xsl:output method="xml" indent="yes"/> <xsl:template match="result"> <xsl:for-each-group select="datapoint" group-by="@poiid"> <node type="poiid" id="{@poiid}"> <xsl:for-each select="current-group()"> <node type="period" id="{@period}" value="{@value}"/> </xsl:for-each> </node> </xsl:for-each-group> </xsl:template> </xsl:stylesheet> to convert it into <?xml version="1.0" encoding="UTF-8"?> <node type="poiid" id="2492"> <node type="period" id="2004" value="1240"/> <node type="period" id="2005" value="1290"/> <node type="period" id="2006" value="1280"/> <node type="period" id="2007" value="1320"/> <node type="period" id="2008" value="1330"/> <node type="period" id="2009" value="1340"/> <node type="period" id="2010" value="1340"/> <node type="period" id="2011" value="1335"/> </node> <node type="poiid" id="2493"> <node type="period" id="2004" value="1120"/> <node type="period" id="2005" value="1120"/> <node type="period" id="2006" value="1100"/> <node type="period" id="2007" value="1100"/> <node type="period" id="2008" value="1100"/> <node type="period" id="2009" value="1110"/> <node type="period" id="2010" value="1105"/> <node type="period" id="2011" value="1105"/> </node> Works smoothly. Where I got stuck is when I tried to make it more dynamic. The real life input has 6 attributes for each datapoint instead of 3, and the usecase requires the possibility to set the grouping parameters dynamically. I tried using parameters <xsl:param name="k1" select="'poiid'"/> <xsl:param name="k2" select="'period'"/> but passing them to the rest of the xslt is something that I can't get right. The code below doesn't work, but clarifies hopefully, what I'm looking for. <xsl:template match="result"> <xsl:for-each-group select="datapoint" group-by="@{$k1}"> <node type="{$k1}" id="@{$k1}"> <xsl:for-each select="current-group()"> <node type="{$k2}" id="@{$k2}" value="{@value}"/> </xsl:for-each> </node> </xsl:for-each-group> </xsl:template> Any help appreciated..

Read the article

Configuring Fed Authentication Methods in OIF / IdP

- by Damien Carru

In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:Password </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

Read the article

Strategies for invoking subclass methods on generic objects

- by Brad Patton

I've run into this issue in a number of places and have solved it a bunch of different ways but looking for other solutions or opinions on how to address. The scenario is when you have a collection of objects all based off of the same superclass but you want to perform certain actions based only on instances of some of the subclasses. One contrived example of this might be an HTML document made up of elements. You could have a superclass named HTMLELement and subclasses of Headings, Paragraphs, Images, Comments, etc. To invoke a common action across all of the objects you declare a virtual method in the superclass and specific implementations in all of the subclasses. So to render the document you could loop all of the different objects in the document and call a common Render() method on each instance. It's the case where again using the same generic objects in the collection I want to perform different actions for instances of specific subclass (or set of subclasses). For example (an remember this is just an example) when iterating over the collection, elements with external links need to be downloaded (e.g. JS, CSS, images) and some might require additional parsing (JS, CSS). What's the best way to handle those special cases. Some of the strategies I've used or seen used include: Virtual methods in the base class. So in the base class you have a virtual LoadExternalContent() method that does nothing and then override it in the specific subclasses that need to implement it. The benefit being that in the calling code there is no object testing you send the same message to each object and let most of them ignore it. Two downsides that I can think of. First it can make the base class very cluttered with methods that have nothing to do with most of the hierarchy. Second it assumes all of the work can be done in the called method and doesn't handle the case where there might be additional context specific actions in the calling code (i.e. you want to do something in the UI and not the model). Have methods on the class to uniquely identify the objects. This could include methods like ClassName() which return a string with the class name or other return values like enums or booleans (IsImage()). The benefit is that the calling code can use if or switch statements to filter objects to perform class specific actions. The downside is that for every new class you need to implement these methods and can look cluttered. Also performance could be less than some of the other options. Use language features to identify objects. This includes reflection and language operators to identify the objects. For example in C# there is the is operator that returns true if the instance matches the specified class. The benefit is no additional code to implement in your object hierarchy. The only downside seems to be the lack of using something like a switch statement and the fact that your calling code is a little more cluttered. Are there other strategies I am missing? Thoughts on best approaches?

Read the article

Dyanmic crm onSave change the value

- by jk

Hi I got one assignment on Dynamic CRM 4. We have one custome entity and it has one attribute called 'Issue Number' this attributes value generated by Plug-in when it save. When form will created meaning onLoad it will display blank value(text box is empty). But now we want to check that number is existing then concate with some random number. For that I wrote following javascript. if((event.Mode == 1) || (event.Mode == 2) ) { var varIssueNumber = crmForm.all.new_issueNumber.DataValue; alert(varIssueNumber); } but it is giving 'null'. Can anybody please let me know how can I get the value of text field? thanks in advance

Read the article

jQuery for dynamic Add/Remove row function, it's clone() objcet cannot modify element name

- by wcy0942

I'm try jQuery for dynamic Add/Remove row function, but I meet some question in IE8 , it's clone() objcet cannot modify element name and cannot use javascript form (prhIndexed[i].prhSrc).functionKey, but in FF it works very well, source code as attachment, please give me a favor to solve the problem. <html> $(document).ready(function() { //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Define some variables - edit to suit your needs //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // table id var _table = jQuery("#prh"); // modify here // tbody tbody var _tableBody = jQuery("tbody",_table); // buttons var _addRowBtn = jQuery("#controls #addRow"); var _insertRowBtn= jQuery("#controls #insertRow"); var _removeRowBtn= jQuery("#controls #removeRow"); //check box all var _cbAll= jQuery(".checkBoxAll", _table ); // add how many rows var _addRowsNumber= jQuery("#controls #add_rows_number"); var _hiddenControls = jQuery("#controls .hiddenControls"); var blankRowID = "blankRow"; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //click the add row button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _addRowBtn.click(function(){ // when input not isNaN do add row if (! isNaN(_addRowsNumber.attr('value')) ){ for (var i = 0 ; i < _addRowsNumber.attr('value') ;i++){ var newRow = jQuery("#"+blankRowID).clone(true).appendTo(_tableBody) .attr("style", "display: ''") .addClass("rowData") .removeAttr("id"); } refreshTable(_table); } return false; //kill the browser default action }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //checkbox select all //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _cbAll.click(function(){ var checked_status = this.checked; var prefixName = _cbAll.attr('name'); // find name prefix match check box (group of table) jQuery("input[name^='"+prefixName+"']").each(function() { this.checked = checked_status; }); }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Click the remove all button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _removeRowBtn.click(function(){ var prefixName = _cbAll.attr('name'); // find name prefix match check box (group of table) jQuery("input[name^='"+prefixName+"']").not(_cbAll).each(function() { if (this.checked){ // remove tr row , ckbox name the same with rowid jQuery("#"+this.name).remove(); } }); refreshTable(_table); return false; }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Click the insert row button //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _insertRowBtn.click(function(){ var prefixName = _cbAll.attr('name'); jQuery("input[name^='"+prefixName+"']").each(function(){ var currentRow = this.name;// ckbox name the same with rowid if (this.checked == true){ newRow = jQuery("#"+blankRowID).clone(true).insertAfter(jQuery("#"+currentRow)) .attr("style", "display: ''") .addClass("rowData") .removeAttr("id"); } }); refreshTable(_table); return false; }); //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Function to refresh new row //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ function refreshTable(_table){ var tableId = _table.attr('id'); var count =1; // ignore hidden column // update tr rowid jQuery ( "#"+tableId ).find(".rowData").each(function(){ jQuery(this).attr('id', tableId + "_" + count ); count ++; }); count =0; jQuery ( "#"+tableId ).find("input[type='checkbox'][name^='"+tableId+"']").not(".checkBoxAll").each(function(){ // update check box id and name (not check all) jQuery(this).attr('id', tableId + "_ckbox" + count ); jQuery(this).attr('name', tableId + "_" + count ); count ++; }); // write customize code here customerRow(_table); }; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //Function to customer new row : modify here //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ function customerRow(_table){ var form = document.myform; var pageColumns = ["prhSeq", "prhChannelproperty", "prhSrc"]; //modify here var tableId = _table.attr('id'); var count =1; // ignore hidden column // update tr rowid jQuery ( "#"+tableId ).find(".rowData").each(function(){ for(var i = 0; i < pageColumns.length; i++){ jQuery ( this ).find("input[name$='"+pageColumns[i]+"']").each(function(){ jQuery(this).attr('name', 'prhIndexed['+count+'].'+pageColumns[i] ); // update prhSeq Value if (pageColumns[i] == "prhSeq") { jQuery(this).attr('value', count ); } if (pageColumns[i] == "prhSrc") { // clear default onfocus //jQuery(this).attr("onfocus", ""); jQuery(this).focus(function() { // doSomething }); } }); jQuery ( this ).find("select[name$='"+pageColumns[i]+"']").each(function(){ jQuery(this).attr('name', 'prhIndexed['+count+'].'+pageColumns[i] ); }); }// end of for count ++; }); jQuery ( "#"+tableId ).find(".rowData").each(function(){ // only for debug alert ( jQuery(this).html() ) }); }; //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ }); <div id="controls"> <table width="350px" border="0"> <tr><td> <input id="addRow" type="button" name="addRows" value="Add Row" /> <input id="add_rows_number" type="text" name="add_rows_number" value="1" style="width:20px;" maxlength="2" /> <input id="insertRow" type="button" name="insert" value="Insert Row" /> <input id="removeRow" type="button" name="deleteRows" value="Delete Row" /> </td></tr> </table></div> <table id="prh" width="350px" border="1"> <thead> <tr class="listheader"> <td nowrap width="21"><input type="checkbox" name="prh_" class="checkBoxAll"/></td> <td nowrap width="32">Sequence</td> <td nowrap width="153" align="center">Channel</td> <td nowrap width="200">Source</td> </tr> </thead> <tbody>  <tr id='blankRow' style="display:none" > <td><input type="checkbox" id='prh_ckbox0' name='prh_0' value=""/></td> <td align="right"><input type="text" name="prhIndexed[0].prhSeq" maxlength="10" value="" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[0].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[0].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr>  <tr id='prh_1' class="rowData"> <td><input type="checkbox" id='prh_ckbox1' name='prh_1' value=""/></td> <td align="right"><input type="text" name="prhIndexed[1].prhSeq" maxlength="10" value="1" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[1].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[1].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr> <tr id='prh_2' class="rowData"> <td><input type="checkbox" id='prh_ckbox2' name='prh_2' value=""/></td> <td align="right"><input type="text" name="prhIndexed[2].prhSeq" maxlength="10" value="2" onkeydown="" onblur="" onfocus="" readonly="readonly" style="width:30px;background-color:transparent;border:0;line-height:13pt;color: #993300;background-color:transparent;border:0;line-height:13pt;color: #993300;"></td> <td><select name="prhIndexed[2].prhChannelproperty"><option value=""></option> <option value="A01">A01</option> <option value="A02">A02</option> <option value="A03">A03</option> <option value="A04">A04</option> </select></td> <td><input type="text" name="prhIndexed[2].prhSrc" maxlength="6" value="new" style="width:80px;background-color:#FFFFD7;"> <div id='displayPrhSrcName0'></div> </td> </tr> </tbody> </table>

Search Results

Search found 17526 results on 702 pages for 'dynamic methods'.

Page 19/702 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26 | Next Page >

- by outa

- by pieter.lowie

- by viatropos

- by bert

- by tolga

- by Connor Black

- by PP

- by Frank

- by netvope

- by Enigma

- by Savvas Sopiadis

- by Shimmy

- by Mik378

- by Jason Williams

- by Nazgulled

- by user260157

- by user337501

- by Rohit

- by Chandradyani

- by BoDiE2003

- by Ophileon

- by Damien Carru

- by Brad Patton

- by jk

- by wcy0942

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26 | Next Page >