Search Results

Search found 30360 results on 1215 pages for 'end of life'.

Page 19/1215 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Start Daemonised GNU Screen from script a allow calling script to end

    - by tez
    I have a script on an embedded device that calls screen to start if a user logs in via a ssh session... #!/bin/sh SCREENRUNNING=`pgrep SCREEN` if [ -z "$SCREENRUNNING" ]; then echo "Screen not running so let's start the Master session sleep 2 screen -dmS Master sleep 2 screen -x root/Master else echo "Screen is already running let's connect to existing session" sleep 2 screen -x root/Master fi However this keeps the calling script active till the screen session exits,even if it's detached. What I want to do is have the calling script finish and exit while the screen session stays active. I've tried daemonising the screen -x lines and adding an & to the end of the screen -x lines neither of which work properly. Ideas?

    Read the article

  • How to Architect a system on AWS for scaling (with a MySQL back-end)

    - by Edan Maor
    I'm trying to understand how to architect an Amazon Web Services application. As I understand it, the whole point of using something like AWS is to make the eventual scaling easier, so I'm trying to understand how to do that. I have an instance, running off of EBS (EBS-based instance, not a regular instance). My application (a Django app) uses MySQL as a back-end. So the question is, where am I supposed to install the MySQL? Do I install it on the same instance? In which case, as far as I can tell, I can't simply create more server instances from that image. Or am I supposed to simply spin up another server as a DB server, and run off of that? Thanks for any help!

    Read the article

  • MS Access ADP front end and SQL Server back end for field data collection?

    - by Brash Equilibrium
    I am an anthropologist. I am going to the field and will use a netbook to collect survey data. The survey forms will need to allow me to enter data into multiple tables, search tables, allow subforms, and be fast enough to not slow down my interview. I have considered storing the data in a SQL Server Express 2008 R2 server (there will be a lot of data) while using a Microsoft Access data project as a front end. To cut down the number of steps required to collect and store data, I'm considering using the netbook for both data storage and collection (after reading this article about SQL Server on a netbook). My questions are: (1) Is there a simpler solution that is also gratis (gratis because I already have a MS Access license from my workplace, and SQL Server Express is, obviously, free)? (2) Does my idea to store and collect data using the netbook make sense? Thank you.

    Read the article

  • want to make my pages end with HTML

    - by user41997
    here is my current .htaccess For security reasons, Option followsymlinks cannot be overridden. Options +FollowSymlinks Options +SymLinksIfOwnerMatch ErrorDocument 404 /404.php RewriteEngine on rewritecond %{http_host} ^jugep.com [nc] rewriterule ^(.*)$ http://www.jugep.com/$1 [r=301,nc] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^peliculas/([^/]+)$ pelicula.php?pelicula=$1 [L] RewriteRule ^descargar/([^/]+)$ descargar.php?descargar=$1 [L] RewriteRule ^peliculas$ peliculas.php [L] RewriteRule ^peliculas/$ peliculas.php [L] RewriteRule ^buscar$ buscar.php [L] RewriteRule ^buscar/$ buscars.php [L] RewriteRule ^contactar$ contactar.php [L] RewriteRule ^contactar/$ contactars.php [L] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Can someone help me out here, I would like my links to end with a HTML for every link currently a link on my site looks like this (http://www.jugep.com/peliculas/Casino_Royale) I would like it to look like this(http://www.jugep.com/peliculas/Casino_Royale.html) any help is greatly apreciated

    Read the article

  • Mapping Ctrl+Arrow for Home/End/PageUp/Down

    - by user67275
    I'm using Windows 7 on Dell New Inspiron 14z Ultrabook. It doesn't have Home/End/PgUp/PgDn keys. Instead I have to use Fn + arrow keys. Can I re-map those to Ctrl + arrows or Alt + arrows or Shift + arrows? That way I could go one page up and down with only my right hands rather than with the left hand on the Fn key and right hand on arrow key. Also, volume up and down is assigned to FnF11 and FnF12. Can I re-map them to F11 and F12? Existing functions assigned to F11 and F12 will be replaced by FnF11 and FnF12. Is it possible?

    Read the article

  • To have a long life with the battery it has to be separated from the Laptop after each use

    - by laptopo1 dsad
    To have a long life with the battery it has to be separated from the Laptop after each use Developing a Laptop and concern about it's battery life Don't be concerned follow this advice how to deal with your Laptop battery. A fresh power supply of your Laptop can be purchased in a very low charge condition, and must be fully charged before use. A different battery pack needs to be fully charged and fully discharged or cycled as much as five times to condition them into performing at full capacity. And also refer your manual instructions of one's Laptop for charging instructions. Inspiron 15z battery Tips: Unplug battery after use: To have a long life with the battery it has to be separated from the Laptop after each use. Clean battery contacts often: Clean your battery's metal contacts once in a month with a cloth moistened with rubbing alcohol. This prevents the transfer of power out of your battery additional efficient. Turn off the WiFi and Bluetooth, in any other case being used: Usually, we activate our WiFi or Bluetooth for whatever reason and tend to forget to Off it, that could spark a huge relieve your battery, Shut off right after the usage. Dell XPS L501x battery Dim notebook screen: When you're with your Laptop in Daytime, you will need for full brightness. But also in case of Night, just dim the screen reducing brightness, which will consume more charge once the brightness might be more and also It's essential on your eyes to determine lesser brighten screen inside nights. Dell Inspiron 17R battery Have hardly any Background programs: Letting more programs to own behind the screen could consume more Dell Inspiron N4010 battery charge hence have very few without background programs are Better. Make use of the Hard disk drive more than CD/DVD drive: Making use of disc drive instead your CD/DVD drive could consume less battery power. Latitude E5400 Battery

    Read the article

  • How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

    - by beam022
    Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

    Read the article

  • Any mates have same plan as me. Focust on tech whole life, no wife, no kids [closed]

    - by Anders Lind
    I am about 30 years old, c++ programmer. Kernel hacker. Living in east coast US. Day by day, night by night. I am in front of my monitor, typing code on my hhkb, scratching idea on my notebook. In my spare time, I play piano sometimes. Go to some classical concert once a month. Basically having a happy life. One concern is I dont have gf. I dont have wife nor kids. My parents start to worry about this. Occasionally they will ask my status. they wont tell me to do anything. But I can see their worries. So, my question is, is my life normal? How many mates think same as me? (I only know rms is single, has no kids, and having a happy life. But I am way worse than him. compare to him, I am nothing. If I am as successful as him. I won;t ask this question here.)

    Read the article

  • Turn off additional cpu cores while on battery

    - by Chris McGrath
    I'm currently an running a quad core processor on windows 7 and was wondering if there is a way to turn off unneeded cpu cores while I'm running on battery to extend battery life it would be nice to do this automatically but will also accept way to it manually if there is no way to do it automatically either in windows or through management software I've searched on the internet and haven't been able to find anything to this effect on google

    Read the article

  • Failing rspec Rails Tutorial Chapter 9.3

    - by greyghost24
    I am failing 3 tests and I have found numerous examples on here and on on the internet in general but I can't seem to find where I'm going wrong. Thanks for any help. 1) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' 2) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' 3) User pages signup with valid information edit page Failure/Error: before { visit edit_user_path(user) } ActionView::Template::Error: undefined method `model_name' for NilClass:Class # ./app/views/users/edit.html.erb:6:in `_app_views_users_edit_html_erb___4113112884365867193_70232486166220' # ./spec/requests/user_pages_spec.rb:96:in `block (5 levels) in <top (required)>' Finished in 0.26515 seconds 3 examples, 3 failures Failed examples: rspec ./spec/requests/user_pages_spec.rb:100 # User pages signup with valid information edit page rspec ./spec/requests/user_pages_spec.rb:99 # User pages signup with valid information edit page rspec ./spec/requests/user_pages_spec.rb:101 # User pages signup with valid information edit page authentication_pages_spec.rb require 'spec_helper' describe "Authentication" do subject { page } describe "signin page" do before { visit signin_path } it { should have_selector('h1', text: 'Sign in') } it { should have_selector('title', text: 'Sign in') } end describe "signin" do before { visit signin_path } describe "with invalid information" do before { click_button "Sign in" } it { should have_selector('title', text: 'Sign in') } it { should have_selector('div.alert.alert-error', text: 'Invalid') } describe "after visiting another page" do before { click_link "Home" } it { should_not have_selector('div.alert.alert-error') } end end describe "with valid information" do let(:user) { FactoryGirl.create(:user) } before do fill_in "Email", with: user.email fill_in "Password", with: user.password click_button "Sign in" end it { should have_selector('title', text: user.name) } it { should have_link('Profile', href: user_path(user)) } it { should have_link('Sign out', href: signout_path) } it { should_not have_link('Sign in', href: signin_path) } describe "followed by signout" do before { click_link "Sign out" } it { should have_link('Sign in') } end end end end Here is the users_controller: class UsersController < ApplicationController def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save sign_in @user flash[:success] = "Welcome to the Sample App!" redirect_to @user else render 'new' end end end def edit @user = User.find(params[:id]) end edit.html.erb: <% provide(:title, "Edit user") %> <h1>Update your profile</h1> <div class="row"> <div class="span6 offset3"> <%= form_for(@user) do |f| %> <%= render 'shared/error_messages' %> <%= f.label :name %> <%= f.text_field :name %> <%= f.label :email %> <%= f.text_field :email %> <%= f.label :password %> <%= f.password_field :password %> <%= f.label :password_confirmation, "Confirm Password" %> <%= f.password_field :password_confirmation %> <%= f.submit "Save changes", class: "btn btn-large btn-primary" %> <% end %> <%= gravatar_for @user %> <a href="http://gravatar.com/emails">change</a> </div> here is the user_pages_spec: require 'spec_helper' describe "User pages" do subject { page } describe "profile page" do let(:user) { FactoryGirl.create(:user) } before { visit user_path(user) } it { should have_selector('h1', text: user.name) } it { should have_selector('title', text: user.name) } end describe "signup page" do before { visit signup_path } it { should have_selector('h1', text: 'Sign up') } it { should have_selector('title', text: full_title('Sign up')) } end describe "signup" do before { visit signup_path } describe "with invalid information" do it "should not create a user" do expect { click_button "Create my account" }.not_to change(User, :count) end describe "error messages" do before { click_button "Create my account" } it { should have_selector('title', text: 'Sign up') } it { should have_content('error') } end end describe "with valid information" do before do fill_in "Name", with: "Example User" fill_in "Email", with: "[email protected]" fill_in "Password", with: "foobar" fill_in "Confirmation", with: "foobar" end it "should create a user" do expect do click_button "Create my account" end.to change(User, :count).by(1) end describe "after saving the user" do before { click_button "Create my account" } let(:user) { User.find_by_email('[email protected]') } it { should have_selector('title', text: user.name) } it { should have_selector('div.alert.alert-success', text: 'Welcome') } it { should have_link('Sign out') } end end end describe "signup page" do before { visit signup_path } it { should have_selector('h1', text: 'Sign up') } it { should have_selector('title', text: full_title('Sign up')) } end describe "signup" do before { visit signup_path } let(:submit) { "Create my account" } describe "with invalid information" do it "should not create a user" do expect { click_button submit }.not_to change(User, :count) end end describe "with valid information" do before do fill_in "Name", with: "Example User" fill_in "Email", with: "[email protected]" fill_in "Password", with: "foobar" fill_in "Confirmation", with: "foobar" end it "should create a user" do expect { click_button submit }.to change(User, :count).by(1) end describe "edit" do let(:user) { FactoryGirl.create(:user) } before { visit edit_user_path(user) } describe "page" do it { should have_selector('h1', text: "Update your profile") } it { should have_selector('title', text: "Edit user") } it { should have_link('change', href: 'http://gravatar.com/emails') } end describe "with invalid information" do before { click_button "Save changes" } it { should have_content('error') } end end end end end edit: users_controllers.rb was formatted incorrectly. It should look like this: class UsersController < ApplicationController def show @user = User.find(params[:id]) end def new @user = User.new end def create @user = User.new(params[:user]) if @user.save sign_in @user flash[:success] = "Welcome to the Sample App!" redirect_to @user else render 'new' end end def edit @user = User.find(params[:id]) end end

    Read the article

  • Official end of support date for Internet Explorer 6 on Windows XP

    - by scunliffe
    If I read the docs on Windows Service Pack support policies, and the specific Internet Explorer lifecycle support page as well as the Wikipedia page I've deduced that: IE6 support ends/ended at: Windows 2000 Ended (date unknown) Windows XP SP0 (RTM) Ended Home: 30-Aug-2003 Pro: 30-Sep-2004 SP1 Ended Home: 11-Jul-2004 Pro: 11-Jul-2004 SP2 Home: 13-Jul-2010 Pro: 13-Jul-2010 SP3 (released: April 21, 2008) Home: ??? Pro: ??? What isn't clear is the Windows XP SP3 scenario. In "human" terms, when is the end of support for IE6 on Windows XP SP3? e.g. if there is never a Windows XP SP4... or heaven forbid, an SP4 is released. I realize this doesn't force people to upgrade etc. however I'm trying to get a "semi" official word on when IE6 moves into the "not supported" category. I'm not interested in philosophical answers e.g. "big enterprise won't upgrade but they will expect support into 2017" stuff... I just want the "clear answer" in terms of official Microsoft support.

    Read the article

  • Proper High-End Video Editing Software for Windows?

    - by Michael Stum
    I'm wondering if anyone here has experience with Prosumer/High-End Video Editing? So far I use Adobe Premiere CS4, but it is an unstable and buggy mess sadly. This could be partially caused by the fact that my input material isn't always pure HDV/AVCHD but sometimes it can be DivX or some already pre-processed video. The one thing I liked about Adobe is though that with After Effects and Encore, they have a good overall toolset, but if it's sub-par then it's no good. Luckily it is already paid for and was worth it's money overall, so It's not a complete waste of money. But are there alternatives? Especially After Effects is quite unique, and the closest thing I found is Apple's Final Cut Studio which includes Motion and DVD Studio. The two downsides is that it requires a Mac and that it doesn't support BluRay though. Any hints for Windows? Sony Vegas might be something I'll look at, but I'm guessing I have to keep using After Effects for some serious compositing/VFX?

    Read the article

  • Cisco Access switch is dropping large amount of end points

    - by user135458
    This afternoon, with no changes to the network, a switch suddenly started dropping off lots of connections. These connections would come back up a few minutes later, then another area connected to the switch would drop off. This is an older 4006 chassis switch which could in and of itself be a problem but I'm looking to see what else you all would look for in trying to find a root cause. Switch is connected via ports 1/1 and 1/2 in an etherchannel to a VSS core 1/1/42 and 2/1/42. Both sides are up and working however the CPU on the switch will spike up to 99% and that's when CRC errors start to hit the VSS core on one of those interfaces and end points start dropping off. We tried new transceivers and SFP's on each side of the link, same result. When we tried swapping the fiber patch cables on the access switch the CRC errors did not follow the fiber cables they stayed with port 1/2 on the access switch. So port 1/2 on the supervisor module looks like the culprit. We actually tried to create a new member of the ethernet channel by taking a fiber media converter to cat5 and make that a member of the port-channel but when we plugged it in you couldn't even reach the switch. I'm guessing that's unrelated and a problem with the media converter. As of right now we have left it in a state of only one fiber cable running to one side of the VSS core (1/1 Access Switch -- 2/1/42). I've sent some info into TAC and they are looking into the situation but does anyone else have any commands I could run or some troubleshooting I could look into in the meantime?

    Read the article

  • Proper end of day sequence to maintain monitor config

    - by WarmBeer
    I've got an HP EliteBook 6930p that travels from home, where it is connected to individual cables, and work where there is a docking station. At both locations I have an external monitor as the secondary monitor and like to have the laptop screen as the primary, i.e. with the task bar. At the end of the day I close the laptop, which is supposed to set it to standby. When I get home I plug in the power cord and the external monitor cord and open the computer. When heading into work I close the computer and unplug everything. Inevitably when I open the computer at the new location the monitors are reversed, i.e. the primary, task bar display is on the external monitor and the laptop shows the secondary, even though when i click identify the laptop has the 1. I then have to disable the secondary display, switch the primary to the laptop and re-enable the secondary. I've tried locking the computer before closing and occasionally that works to keep the setup in place but not always. Any suggestions for how to keep the config in place during transport? ed

    Read the article

  • mod_rpaf problems with Nginx front, Apache back-end after Ubuntu upgrade

    - by Kenn
    I'm running an Nginx front-end for static files, and proxying to an Apache backend for PHP and Passenger, using Apache's mod_rpaf to set the correct remote IP address on the backend. Everything worked fine until I upgraded to Ubuntu 12.04 (Precise). Now Apache reports all connections coming from 127.0.0.1. Here's the relevant configuration. Nothing here changed with the upgrade. Nginx: proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; mod_rpaf: <IfModule mod_rpaf.c> RPAFenable On RPAFsethostname On RPAFproxy_ips 127.0.0.1 ::1 RPAFheader X-Forwarded-For </IfModule> I'm using %{X-Forwarded-For}i in my Apache LogFormat directive and the access logs are showing the correct remote address, so I know Nginx is passing the address along properly. In a phpinfo() test, HTTP_X_FORWARDED_FOR is showing the correct remote address, but REMOTE_ADDR is 127.0.0.1. This is reflected in PHP applications as well, such as WordPress comments. I've tried switching Nginx and mod_rpaf to X-Real-IP with no effect. Did something change that I missed? Relevant version info, everything installed from the Ubuntu repository: Nginx 1.1.19 Apache 2.2.22 mod_rpaf 0.6

    Read the article

  • Configure linux machine as bridge/switch and end device

    - by leemes
    At my home, I have two desktop PCs in two rooms. The router / DSL modem is in one of these rooms. Now I want to configure a home server (having 2 LAN ports, running 24/7) in the corridor between the two rooms, using only one LAN cable at each door. This gives me the following physical configuration: (door) (door) .----/-/----. .-----/-/----------._ FritzBox | | | .----´´ DSL Router PC1 Server | PC2 As just said, the server has 2 network interfaces and is running Ubuntu. What I need now is a network configuration which enables both the server and PC1 to connect to the router. I think the server needs to serve as a bridge or switch. Currently, all computers are configured having static IP addresses. If I'm understanding it correctly, a bridge / switch doesn't have its own IP address, but as the server needs to be configured as an own end device, it needs to have one. My first question is, do I have to configure both interfaces separately, giving both the same static IP address? My next question is, how do I bridge the two physical networks into one? I have basic understanding (but am always confused again and again) of bridges and switches, but I don't know how to configure it in software. I only know that it's possible to do so :) The third question is: Is it possible to configure this in a way that network packets from/to PC1 to/from the router only go through hardware or only consume low CPU in the server? Can you help me? Thanks in advance!

    Read the article

  • Error at the end of APC install

    - by cinqoTimo
    I need to get APC running for a Drupal install of mine. I found a fairly concise guide at http://blog.4rev.net/2009-09/installing-apc-accelerator-into-php5-fedora-core-11/ for installing on FC11, only, I am using FC12. I figured I would give it a shot. I was able to run the following commands successfully - and yum installed fc12 versions of everything in the FC11 guide. yum install php-pear yum install php-devel httpd-devel yum groupinstall ‘Development Tools’ yum groupinstall ‘Development Libraries’ Then, I tried pecl install apc. Everything looked good until to got to the end, where it outputted the following error. /var/tmp/APC/php_apc.c: In function ‘zif_apc_compile_file’: /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_class_table’ /var/tmp/APC/php_apc.c:881: warning: unused variable ‘eg_function_table’ /var/tmp/APC/php_apc.c: At top level: /var/tmp/APC/php_apc.c:959: error: duplicate ‘static’ make: *** [php_apc.lo] Error 1 ERROR: `make' failed Some people have had success with installing apc-beta, but that didn't work for me.. Any suggestions? Is there something I missed that is critical in the FC12 version?

    Read the article

  • add space to every word's end in a string in C

    - by hlx98007
    Here I have a string: *line = "123 567 890 "; with 2 spaces at the end. I wish to add those 2 spaces to 3's end and 7's end to make it like this: "123 567 890" I was trying to achieve the following steps: parse the string into words by words list (array of strings). From upstream function I will get values of variables word_count, *line and remain. concatenate them with a space at the end. add space distributively, with left to right priority, so when a fair division cannot be done, the second to last word's end will have (no. of spaces) spaces, the previous ones will get (spaces + 1) spaces. concatenate everything together to make it a new *line. Here is a part of my faulty code: int add_space(char *line, int remain, int word_count) { if (remain == 0.0) return 0; // Don't need to operate. int ret; char arr[word_count][line_width]; memset(arr, 0, word_count * line_width * sizeof(char)); char *blank = calloc(line_width, sizeof(char)); if (blank == NULL) { fprintf(stderr, "calloc for arr error!\n"); return -1; } for (int i = 0; i < word_count; i++) { ret = sscanf(line, "%s", arr[i]); // gdb shows somehow it won't read in. if (ret != 1) { fprintf(stderr, "Error occured!\n"); return -1; } arr[i] = strcat(arr[i], " "); // won't compile. } size_t spaces = remain / (word_count * 1.0); memset(blank, ' ', spaces + 1); for (int i = 0; i < word_count - 1; i++) { arr[0] = strcat(arr[i], blank); // won't compile. } memset(blank, ' ', spaces); arr[word_count-1] = strcat(arr[word_count-1], blank); for (int i = 1; i < word_count; i++) { arr[0] = strcat(arr[0], arr[i]); } free(blank); return 0; } It is not working, could you help me find the parts that do not work and fix them please? Thank you guys.

    Read the article

  • Email sent from Centos end up in user spam folder

    - by oObe
    I am facing this issue, I use the default postfix MTA in centos but the mail end up in user spam folder, but this does not seem to be a problem in Debian using exim4, both host have hostname and domain name configured, and relay mail through external smtp host. Both configuration and recieving email header are attached. The different seems that Debian has this additional (envelope tag) and (from) tag other than some minor syntax differences. Any help to resolve is appreciated. The IP address and DNS is masked as follow: 1.2.3.4 = My IP address smtp.host.com = external smtp host for my company [email protected] = account at smtp host centos.abc.com = Local centos server debian.abc.com = Local debian server Thanks. Centos main.cf config with the following params configured myhostname = centos.abc.com mydomain = abc.com myorigin = centos.abc.com relayhost = smtp.host.com Centos - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 13:36:49 +0800 Received: by centos.abc.com (Postfix, from userid 0) id 1E0637B89; Fri, 28 Sep 2012 13:36:39 +0800 (SGT) Date: Fri, 28 Sep 2012 13:36:39 +0800 To: [email protected] Subject: Test mail from centos User-Agent: Heirloom mailx 12.4 7/29/08 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <[email protected]> From: [email protected] (root) X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://i.imgur.com/7WAYX.jpg Debain exim4 config .... # This is a Debian specific file dc_eximconfig_configtype='smarthost' dc_other_hostnames='debian.abc.com' dc_local_interfaces='127.0.0.1 ; ::1' dc_readhost='debian.abc.com' dc_relay_domains='smtp.host.com' dc_minimaldns='false' dc_relay_nets='127.0.0.1' dc_smarthost='smtp.host.com' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' debian - User receiving mail header Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Return-Path: <[email protected]> Received: from 1.2.3.4 [1.2.3.4] by smtp.host.com with SMTP; Thu, 27 Sep 2012 15:02:53 +0800 Received: from root by debian.abc.com with local (Exim 4.72) (envelope-from <[email protected]>) id 1TH86d-00010v-G9 for [email protected]; Thu, 27 Sep 2012 15:01:55 +0800 Date: Thu, 27 Sep 2012 15:01:55 +0800 Message-Id: <[email protected]> To: [email protected] Subject: Test from debian From: root <[email protected]> X-SmarterMail-TotalSpamWeight: 0 X-Antivirus: avast! (VPS 120926-1, 27/09/2012), Inbound message X-Antivirus-Status: Clean http://imgur.com/nMsMA.jpg

    Read the article

  • Extracting specific words that end with .c and .h [on hold]

    - by Alberto Mederos
    I have a very big list of file names that end with a the following: .c .h .cpp and much more. I need to extract file names that end with .c and .h How do I do that? Also, how could I add quotation marks to the beginning and end of the word, followed with a comma? For example, if I have this in the list: mi_var.c How could I extract it from a very big list, and everything else that ends in .c and replace it to have quotation marks and a comma at the end? Like this: "mi_var.c", I'm new to this, any help is greatly appreciated. Here is part of the list: gsd5t_image.c, gsd5t_image_sqif.c, proc_arm.c, proc_cortex.c, proc_k32.c, proc_k32_entry.s, proc_k32_test.c, proc_k32_test_start.s, rom_sub_functions.s, rom_sub_functions_gcc.s, sqif_jump_table.s, sqif_jump_table_gcc.s, tracker_wrapper_functions.s, vector_M0.c, ptimer.c, ptimer_arm.c, ptimer_internal.h, ptimer_internal_arm.h, ptimer_internal_k32.h, ptimer_k32.c, RstMod_if.h, drvRstMod.h, tbus.dxy, tbus_common.c, tbus_common.h, act.c, act.h, act.msgs, act_if.c, act_if.h, sat_signal_processor.c, sat_signal_processor.h, ssp.dxy, ssp.msgs, ssp_acq_handlers.c, ssp_acq_handlers.h, ssp_atx_if.c, ssp_atx_if.h, ssp_bitsync_handlers.c, ssp_bitsync_handlers.h, ssp_cohver_handlers.c, ssp_cohver_handlers.h, ssp_cwscan_handlers.c, ssp_cwscan_handlers.h, ssp_track_handlers.c, ssp_track_handlers.h, ssp_atx_if_test_sort.c, ssp_hack.c, ssp_hack.h, ssp_suite.cpp, ssp_suite.h, ssptloop.c, ssptloop.h, sss.dxy, sss.msgs, sss_atx_if.c, sss_atx_if.h, strong_signal_scan.c, So how to extract certain names?

    Read the article

  • Removing blank page at end of SSRS Report

    - by garrettg
    I have a report that produces a blank page at the end of the report. How do I get rid of it? The report consists of text/list boxes that are embedded inside a rectangle. The rectangle has the property selected: "Add page break after". If this option is selected the report renders exactly how it should, minus the extra blank page at the end. However, if the "Add page break after" option is not selected, the blank page does not appear, although the report does not display the content correctly. It seems that this option is producing the extra page at the end of the report. The issue is not with the margins. How can the last blank page be eliminated while still maintaining the page breaks throughout the rest of the report?

    Read the article

  • Jquery: DatePicker: start/end date

    - by Abu Hamzah
    Hi there, i have looked around before posting my question following what i am looking in my datepicker (start date and end date): 1) Start date: can be any date, (user can select start date current (now) to any future date. 2) Start date: user can select start date as back as 6 months. example: if today is 04/22/2010 then i can go back up to 11/22/2009 but not more than 6 moths. 3) Start date if the user select the start date (current of future, not past) less then 10 days then i would like to alert message saying "need at least 10 days" 4) End date: should be current date to future dates alll previous dates are disabled. 5) *Start date / End date: * should not be greater than one year. Thanks so much.

    Read the article

  • Error premature end of file pops up when accessing a URL

    - by kayteen
    Hi, I am using Coldfsuion 8.0.1 and Solaris 10 and when i try to run this URL, http://IPADDRESS/flex2gateway/http I am receiving an error message "Premature end of file". Please help me out if i am missing any installation/fix. Error details: [Flex] Premature end of file. flex.messaging.MessageException: Premature end of file. at flex.messaging.io.amfx.AmfxMessageDeserializer.fatalError(AmfxMessageDeserializer.java:249) at org.apache.xerces.util.ErrorHandlerWrapper.fatalError(Unknown Source) at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source) at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source) at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at javax.xml.parsers.SAXParser.parse(SAXParser.java:395) at javax.xml.parsers.SAXParser.parse(SAXParser.java:198) at flex.messaging.io.amfx.AmfxMessageDeserializer.parse(AmfxMessageDeserializer.java:103) at flex.messaging.io.amfx.AmfxMessageDeserializer.readMessage(AmfxMessageDeserializer.java:90) at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:113)

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >