Search Results

Search found 841 results on 34 pages for 'frequency'.

Page 19/34 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Asus Eee PC 1000HE wireless woes

  - by Vladimir Noobokov

  Ever since I have upgraded my Asus Eee PC 1000HE from Lucid 10.04 to Precise 12.04 I have been having issues with my wireless connections. At first I had wireless dropouts: I would be able to start using wireless, but then after a few minutes the wireless would stop working even though I was still connected to the network. Lately things turned worse: while I connect to my wireless network, it just never works. I tried all sorts of solutions on offer here and in other forums but none worked. At best I got the wireless to work up until I rebooted, at which point I would get the same symptoms again: the wireless network is there, but it's not really working. By now I tried so many different "solutions" I don't know where to start describing them; I have also reinstalled 12.04 several times, enough to make me lose faith in Ubuntu. Help here looks like my last resort. For the record, my Asus Eee PC 1000HE is equipped with an Atheros wireless card. I have reinstalled 12.04, ran all the suggested updates, and receive the following response when I type iwconfig in the terminal: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Arsenal" Mode:Managed Frequency:2.452 GHz Access Point: 00:04:ED:48:67:89 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:27 Invalid misc:57 Missed beacon:0 eth0 no wireless extensions. Thanks in advance for any help that might be offered.

  Read the article

• Why Oracle Data Integrator for Big Data?

  - by Mala Narasimharajan

  Big Data is everywhere these days - but what exactly is it? It’s data that comes from a multitude of sources – not only structured data, but unstructured data as well.  The sheer volume of data is mindboggling – here are a few examples of big data: climate information collected from sensors, social media information, digital pictures, log files, online video files, medical records or online transaction records.  These are just a few examples of what constitutes big data.   Embedded in big data is tremendous value and being able to manipulate, load, transform and analyze big data is key to enhancing productivity and competitiveness.  The value of big data lies in its propensity for greater in-depth analysis and data segmentation -- in turn giving companies detailed information on product performance, customer preferences and inventory.  Furthermore, by being able to store and create more data in digital form, “big data can unlock significant value by making information transparent and usable at much higher frequency." (McKinsey Global Institute, May 2011) Oracle's flagship product for bulk data movement and transformation, Oracle Data Integrator, is a critical component of Oracle’s Big Data strategy. ODI provides automation, bulk loading, and validation and transformation capabilities for Big Data while minimizing the complexities of using Hadoop.  Specifically, the advantages of ODI in a Big Data scenario are due to pre-built Knowledge Modules that drive processing in Hadoop. This leverages the graphical UI to load and unload data from Hadoop, perform data validations and create mapping expressions for transformations.  The Knowledge Modules provide a key jump-start and eliminate a significant amount of Hadoop development.  Using Oracle Data Integrator together with Oracle Big Data Connectors, you can simplify the complexities of mapping, accessing, and loading big data (via NoSQL or HDFS) but also correlating your enterprise data – this correlation may require integrating across heterogeneous and standards-based environments, connecting to Oracle Exadata, or sourcing via a big data platform such as Oracle Big Data Appliance. To learn more about Oracle Data Integration and Big Data, download our resource kit to see the latest in whitepapers, webinars, downloads, and more… or go to our website on www.oracle.com/bigdata

  Read the article

• Azure Florida Association

  - by Dave Noderer

  Herve Roggero, SQL Azure MVP,  has created a virtual community to focus on Azure. Here is the outline from Herve:   User Group Name:  Azure Florida Association Purpose: Start a virtual Florida user group that targets the Azure platform Venues: Most meetings will be virtual; however I plan to host a few physical events across Florida if possible from time to time; physical events may be a few hours long with potentially more than one speaker Possible Topics: The topics will touch Azure generally speaking, but can have a wide array of concern such as Integration, Data Migration, Hosting, Security, Scalability, Mobile Device integration, successful ventures/lessons learned, cross cloud integration patterns, testing in the cloud, deployment management, reporting… Target Members: Architects, Developers, IT Managers Membership: Membership will be free; virtual events will be free; physical events may involve a minimal cover charge Speakers: If you are interested in speaking or if you have topic ideas, please let me know Frequency: Initially these meetings will be held every other month   The first meeting will be held on January 25, 2012 at 4PM EST. Vikas Sahni, SQL Azure MVP, will be presenting on Demystifying SQL Azure. Vikas will introduce SQL Azure, value proposition, usage scenarios, concepts and architecture, what is there and what is not, including Tips and Tricks.  The actual meeting link will be available in January but please join the linked in group now to be kept informed of this and future events: http://www.linkedin.com/groups?gid=4177626.

  Read the article

• Branching strategy for frequent releases

  - by Technext

  We have very frequent releases and we use Git for version control. When i am mentioning about frequency, please assume it to include bug-fixes and feature release too. All releases are eventually merged into ‘mainline’. When a release is deployed on production and if a bug is identified, people start fixing the bug on the same branch from which the latest release was deployed on production. They do not create a new bug-fix branch for the same. I feel that’s not the right way to go for. There are several components and each component has a different owner, and thus, different perspective. Though I have not initiated talks with them, I am sure there will be a lot of resistance. Main issue that they might cite would be, “There’s a lot of work involved in creating and tracking branches especially when there are so frequent deployments on production. This will consume a lot of dev effort.” Do you think that fixing bug on the same branch from which release was done, a good idea? If yes, how do you manage it? Using tags? I know that best practices may not always be applicable due to several factors but still I would like to know what might be a good approach for branching in a scenario where releases/bug-fixes happen almost on a daily basis.

  Read the article

• Does it matter the direction of a Huffman's tree child node?

  - by Omega

  So, I'm on my quest about creating a Java implementation of Huffman's algorithm for compressing/decompressing files (as you might know, ever since Why create a Huffman tree per character instead of a Node?) for a school assignment. I now have a better understanding of how is this thing supposed to work. Wikipedia has a great-looking algorithm here that seemed to make my life way easier. Taken from http://en.wikipedia.org/wiki/Huffman_coding: Create a leaf node for each symbol and add it to the priority queue. While there is more than one node in the queue: Remove the two nodes of highest priority (lowest probability) from the queue Create a new internal node with these two nodes as children and with probability equal to the sum of the two nodes' probabilities. Add the new node to the queue. The remaining node is the root node and the tree is complete. It looks simple and great. However, it left me wondering: when I "merge" two nodes (make them children of a new internal node), does it even matter what direction (left or right) will each node be afterwards? I still don't fully understand Huffman coding, and I'm not very sure if there is a criteria used to tell whether a node should go to the right or to the left. I assumed that, perhaps the highest-frequency node would go to the right, but I've seen some Huffman trees in the web that don't seem to follow such criteria. For instance, Wikipedia's example image http://upload.wikimedia.org/wikipedia/commons/thumb/8/82/Huffman_tree_2.svg/625px-Huffman_tree_2.svg.png seems to put the highest ones to the right. But other images like this one http://thalia.spec.gmu.edu/~pparis/classes/notes_101/img25.gif has them all to the left. However, they're never mixed up in the same image (some to the right and others to the left). So, does it matter? Why?

  Read the article

• CodePlex Daily Summary for Saturday, May 31, 2014

  CodePlex Daily Summary for Saturday, May 31, 2014Popular ReleasesTooltip Web Preview: ToolTip Web Preview: Version 1.0Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...FileTable Services for Lightswitch: FileTable Services for Lightswitch version 1.0.4: 30 MAY 2014 version 1.0.4SqlFileTableDataSource changes: Updated Delete command to run in batch mode (Insert and Update commands already ran that way) Changed Update command to silently fail if an attempt is made to change something unchangeable (e.g., attempt to change IsFolder) FileNode changes: Made ID property editable, but not (by default) visible in Lightswitch (this is to allow the creator of a FileNode to specify its ID) Made IsFolder editable (this is to allow callers to more eas...HERB.IQ: HERB.IQ.0.7.6 UPGRADE (Windows) BETA 2: HERB.IQ.0.7.6 UPGRADE (Windows) BETA 2SQL Scripts to Improve DNN Performance: Turbo Scripts 0.8.7 for DNN 7.1.2 - 7.2.2: fixed a missing dbo/oq and a misspelled view nameIndonesian Red-Letter Day Calendar: Indonesian Red-Letter Day Calendar: This is a composite has been made by Microsoft Visual Studio 2013.Visual F# Tools: Daily Builds Preview 05-29-2014: This preview is released for use under a proprietary license.ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.QuickMon: Version 3.13: 1. Adding an Audio/sound notifier that can be used to simply draw attention to the application of a warning pr error state is returned by a collector. 2. Adding a property for Notifiers so it can be set to 'Attended', 'Unattended' or 'Both' modes. 3. Adding a WCF method to remote agent host so the version can be checked remotely. 4. Adding some 'Sample' monitor packs to installer. Note: this release and the next release (3.14 aka Pie release) will have some breaking changes and will be incom...fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksXsemmel - XML Editor and Viewer: 29-MAY-2014: WINDOWS XP IS NO LONGER SUPPORTED If you need support for WinXP, download release 15-MAR-2014 instead. FIX: Some minor issues NEW: Better visualisation of validation issues NEW: Printing CHG: Disabled Jumplist CHG: updated to .net 4.5, WinXP NO LONGER SUPPORTEDPerformance Analyzer for Microsoft Dynamics: DynamicsPerf 1.20: Version 1.20 Improved performance in PERFHOURLYROWDATA_VW Fixed error handling encrypted triggers Added logic ACTIVITYMONITORVW to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added logic to optional blocking to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added additional queries for investigating blocking Added logic to collect Baseline capture data (NOTE: QUERY_STATS table has entire procedure cache for that db during...Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesKartris E-commerce: Kartris v2.6002: Minor release: Double check that Logins_GetList sproc is present, sometimes seems to get missed earlier if upgrading which can give error when viewing logins page Added CSV and TXT export option; this is not Google Products compatible, but can give a good base for creating a file for some other systems such as Amazon Fixed some minor combination and options issues to improve interface back and front Turn bitcoin and some other gateways off by default Minor CSS changes Fixed currenc...New Projectsbrute force ip blocker: Utility which will search registry for invalid login attempts and blocked IPs which are attempting BRUTE Force attacksChristofides heuristic: This class can solve salesman travel problem using the Christofides heuristic.CLR Toolbox (Reloaded): "CLR Toolbox (Reloaded)" is a refactored version of "CLR Toolbox" (https://clrtoolbox.codeplex.com) that is written in C# and that targets on .NET and Mono.CPU Frequency Tuner: Calculate approximate frequency of AMD CPU.DAS (Data Access Service) Constructor: A simple data access layer code generator. Actual implementation only connect to a SQL Server.Fancontroller: The Fancontroller is a little tray program for the Fujitsu-Siemens Xa 3530 notebook computer. It has Auto,Fast, Cruise, Low noise speed options.Fractal generator: This class can generate Mandelbrot and Julia set fractal images.igolder curve: We're students from Duta Wacana Chritstian University who built a component for VB.Net. This component draw the points using a formula that We made by ourselvesMDriven Getting started - WPF: This is the suggested starting point if you want to start a new WPF MDriven project. See more at capableobjects.comMegacpu: Megacpu it's a small system tray tool to start and switch between custom profiles created with Turion Power control.Mercator projection: This class can render geograpic coordinates with the mercator projection.modify the .dex: ??DEX?????My Common Portable Library: Notify Property ChangedNearest Neighbor and Voronoi cluster: Find nearest neighbor of a set of points and cluster the points using a voronoi diagram and a dendogram.Otaku Perfection: This is the source code for the game show called Otaku Perfection.Simplified Application Framework: Simplified Application FrameworkSQLSetupHelper: SQL Setup helper for .net application standup-timer-modified: ???????Android????standup-timer??????????，????????????????（???????????）。???????jni??.so?????????dex(odex)??????。Top Verses ( Ayat Emas ): Top Verses Component for VB.NET 2012 or aboveVi-AIO SearchBar: Vi – AIO Search Bar is a project from subject Component Oriented Programming in IT Faculty of Duta Wacana Christian University Yogyakarta.VK9 - .Net Vkontakte API Implementation: VK9 is library that allows you to easily work with official VK (Vkontakte) API in your Microsoft .NET application. ??????V1.0: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Read the article

• How to manage a developer who has poor communication skills

  - by djcredo

  I manage a small team of developers on an application which is in the mid-point of its lifecycle, within a big firm. This unfortunately means there is commonly a 30/70 split of Programming tasks to "other technical work". This work includes: Working with DBA / Unix / Network / Loadbalancer teams on various tasks Placing & managing orders for hardware or infrastructure in different regions Running tests that have not yet been migrated to CI Analysis Support / Investigation Its fair to say that the Developers would all prefer to be coding, rather than doing these more mundane tasks, so I try to hand out the fun programming jobs evenly amongst the team. Most of the team was hired because, though they may not have the elite programming skills to write their own compiler / game engine / high-frequency trading system etc., they are good communicators who "can get stuff done", work with other teams, and somewhat navigate the complex beaurocracy here. They are good developers, but they are also good all-round technical staff. However, one member of the team probably has above-average coding skills, but below-average communication skills. Traditionally, the previous Development Manager tended to give him the Programming tasks and not the more mundane tasks listed above. However, I don't feel that this is fair to the rest of the team, who have shown an aptitute for developing a well-rounded skillset that is commonly required in a big-business IT department. What should I do in this situation? If I continue to give him more programming work, I know that it will be done faster (and conversly, I would expect him to complete the other work slower). But it goes against my principles, and promotes the idea that you can carve out a "comfortable niche" for yourself simply by being bad at the tasks you don't like.

  Read the article

• CodePlex Daily Summary for Sunday, July 28, 2013

  CodePlex Daily Summary for Sunday, July 28, 2013Popular ReleasesMedia Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.0: Users who don't care about compiling the sources on his/her own can download the compiled version. Requirements: - .Net Framework 4.5 - Visual Studio 2010 Tools for Office Runtime see: http://www.microsoft.com/en-us/download/details.aspx?id=39290 - Installed Outlook 2013OfflineBrowser: Preview Release with Search: I've added search to this release.Dynamics CRM 2011 EasyPlugins: EasyPlugins-1.2.3.0-managed: v1.2.3.0 - Bug Fix : Twice plugins execution. - New Abort action - Depth Plugin Execution management on each action - Turn On/Off EasyPlugins feature (can be useful in some cases of imports) ----------------------------- v1.2.0.0 Associate / Disassociate actions are now available Import / Export features Better management of Lookups Trigger NamingMemory Teaser Game: Full Release 1.1.0: -> Fixed Memory leak issue. -> Restart game button issue. -> Added Splash screen. -> Changed Release Icon. This is the version 1.1.0.0VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginFIM 2010 GoogleApps MA: GoogleAppsMA1.1.2: Fixed bug during import. - Fixed following bug. - In some condition, 'dn is missing' error occur.Install Verify Tool: Install Verify Tool V 1.0 With Client: Use a windows service to do a remote validation work. QA can use this tool to verify daily build installation.C# Intellisense for Notepad++: 'Namespace resolution' release: Auto-Completion from "empty spot" Add missing "using" statementsOpen Source SAAS Job board: Version X3: Full version of job board, didn't have monies to fund it so it's free.DSeX DragonSpeak eXtended Editor: Version 1.0.116.0726: Cleaned up Wizard Interface Added Functionality for RTF UndoRedo IE Inserting Text from Wizard output to the Tabbed Editor Added Sanity Checks to Search/Replace Dialog to prevent crashes Fixed Template and Paste undoredo Fix Undoredo Blank spots Added New_FileTag Const = "(New FIle)" Added Filename to Modified FileClose queries (Thanks Lothus Marque)Math.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...AJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.GoAgent GUI: GoAgent GUI 1.3.5 Alpha (20130723): ????????Alpha?，???????????，?????????????。 ??????????GoAgent???（???phus lu?GitHub??????GoAgent??????，??????????????????） ????????????????????????Bug ?????????。??????????????。 ????issue????，????????，????????????????。LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...Microsoft .NET SDK For Hadoop: v 0.9.4951.25594: Bug fixesLINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...New ProjectsAM2013: Unexpected GameChekad: This is a simple small project.DataBaseSchema: DataBase Schema Management!edirAuth: edirAuth is a .NET library for LDAP authentication to NetIQ (formerly Novell©) eDirectory. If you are a NetIQ Identity Management user you are probably using Gimme Rainbows: This is a simple project that can be used to generate Rainbow table from a given dictionary and given salt file. Hashes of various formats can be generated.Heavy Bomber: Heavy Bomber XNA GameIRIS Toolbox [I Rest, IRIS Solves...]: IRIS is a Matlab toolbox for macroeconomic modeling.OpenZapper: OpenZapper is an open source Zapper project. It is mainly a Frequency generator.Sponge - SharePoint Framework: Sponge is a SharePoint Frameworks that contains centralized logging and configuration, as well as other useful Controls, Web Parts and Application Pages.wangyexin: ?????wupantest: atwelltestYemek Menusu: Yemek Menusu

  Read the article

• Logarithmic spacing of FFT bins

  - by Mykel Stone

  I'm trying to do the examples within the GameDev.net Beat Detection article ( http://archive.gamedev.net/archive/reference/programming/features/beatdetection/index.html ) I have no issue with performing a FFT and getting the frequency data and doing most of the article. I'm running into trouble though in the section 2.B, Enhancements and beat decision factors. in this section the author gives 3 equations numbered R10-R12 to be used to determine how many bins go into each subband: R10 - Linear increase of the width of the subband with its index R11 - We can choose for example the width of the first subband R12 - The sum of all the widths must not exceed 1024 He says the following in the article: "Once you have equations (R11) and (R12) it is fairly easy to extract 'a' and 'b', and thus to find the law of the 'wi'. This calculus of 'a' and 'b' must be made manually and 'a' and 'b' defined as constants in the source; indeed they do not vary during the song." However, I cannot seem to understand how these values are calculated...I'm probably missing something simple, but learning fourier analysis in a couple of weeks has left me Decimated-in-Mind and I cannot seem to see it.

  Read the article

• Bookmark Sentry Scans Your Chrome Bookmarks File For Bad Links and Dupes

  - by Jason Fitzpatrick

  Chrome: Bookmark Sentry, a free Chrome extension, takes the hard work out of checking your bookmark file for bad links and duplicates. Install it, forget about it, and get scheduled reports on the state of your bookmarks file. It’s that simple. Once you install the extension, open the options to toggle some basic settings to your liking (like the frequency of the scan, how long you want it to wait for a response, and whether you want it to look for bad links and/or duplicates). Once it finishes scanning you’ll get a report indicating the status of the links (why they are marked as missing or duped) and the ability to selectively or mass delete them. The only caveat we’d share is that it will tell you links behind any sort of security are unavailable. If you bookmark pages that you use for work, behind your corporate firewall for example, if the scanner runs when you’re not authenticated then it won’t be able to reach them. Other than that, it works like a charm. Bookmark Sentry is free, Google Chrome only. Bookmark Sentry [via Addictive Tips] How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

  Read the article

• Release/Change management - best aproach

  - by Bob Rivers

  I asked this question an year ago in StackOverflow and never got a good answer. Since Programmers seems to be a better place to ask it, I'll give it a try... What is the better way to work with release management? More specifically what would be the best way to release packages? For example, assuming that you have a relatively stable system, a good quality assurance process (QA), etc. How do you prefer to release new versions? Let's assume that we are talking about a mid to large "centralized" web system (no clients), in-house development. This system can be considered "vital" for a corporate operations. I have a tendency to prefer to do this by releasing packets at regular intervals, not greater than 1 to 3 months. During this period, I will include into the package,fixes and improvements and make the implementation in production environment only once. But I've seen some people who prefer to place small changes in production, but with a greater frequency. The claim of these people is that by doing so, it is easier to identify bugs that have gone through the process of QA: in a package with 10 changes and another with only 1, it is much easier to know what caused the problem in the package with just one change... What is the opinion came from you?

  Read the article

• One-week release cycle: how do I make this feasible?

  - by Arkaaito

  At my company (3-yr-old web industry startup), we have frequent problems with the product team saying "aaaah this is a crisis patch it now!" (doesn't everybody?) This has an impact on the productivity (and morale) of engineering staff, self included. Management has spent some time thinking about how to reduce the frequency of these same-day requests and has come up with the solution that we are going to have a release every week. (Previously we'd been doing one every two weeks, which usually slipped by a couple of days or so.) There are 13 developers and 6 local / 9 offshore testers; the theory is that only 4 developers (and all testers) will work on even-numbered releases, unless a piece of work comes up that really requires some specific expertise from one of the other devs. Each cycle will contain two days of dev work and two days of QA work (plus 1 day of scoping / triage / ...). My questions are: (a) Does anyone have experience with this length of release cycle? (b) Has anyone heard of this length of release cycle even being attempted? (c) If (a) or (b), how on Earth do you make it work? (Any pitfalls to avoid, etc., are also appreciated.) (d) How can we minimize the damage if this effort fails?

  Read the article

• OUM is Flexible and Scalable

  - by user535886

  Flexible and Scalable Traditionally, projects have been focused on satisfying the contents of a requirements document or rigorously conforming to an existing set of work products. Often, especially where iterative and incremental techniques have not been employed, these requirements may be inaccurate, the previous deliverables may be flawed, or the business needs may have changed since the start of the project. Fitness for business purpose, derived from the Dynamic Systems Development Method (DSDM) framework, refers to the focus of delivering necessary functionality within a required timebox. The solution can be more rigorously engineered later, if such an approach is acceptable. Our collective experience shows that applying fit-for-purpose criteria, rather than tight adherence to requirements specifications, results in an information system that more closely meets the needs of the business. In OUM, this principle is extended to refer to the execution of the method processes themselves. Project managers and practitioners are encouraged to scale OUM to be fit-for-purpose for a given situation. It is rarely appropriate to execute every activity within OUM. OUM provides guidance for determining the core set of activities to be executed, the level of detail targeted in those activities and their associated tasks, and the frequency and type of end user deliverables. The project workplan should be developed from this core. The plan should then be scaled up, rather than tailored down, to the level of discipline appropriate to the identified risks and requirements. Even at the task level, models and work products should be completed only to the level of detail required for them to be fit-for-purpose within the current iteration or, at the project level, to suit the business needs of the enterprise and to meet the contractual obligations that govern the project. OUM provides well defined templates for many of its tasks. Use of these templates is optional as determined by the context of the project. Work products can easily be a model in a repository, a prototype, a checklist, a set of application code, or, in situations where a high degree of agility is warranted, simply the tacit knowledge contained in the brain of an analyst or practitioner. For further reading on agility, see Balancing Agility and Discipline: A guide fro the Perplexed.

  Read the article

• Personalized Pricing

  - by David Dorf

  In past postings I've spent a fair amount of time talking about targeted promotions.  Using a complete view of the customer that includes purchase history, location history, and psychographics gleaned from social media, we can select the offer with the greatest chance of redemption.  This is done to influence shopping behavior, which might be introducing the consumer to a new product line, increasing their basket size, increasing frequency of purchases, etc. Safeway seems to be taking a slightly different approach with their personalized pricing.  In additional to offering electronic coupons and club card offers, they are also providing a personalized price for certain items based on purchase history.  So when Sally want to shop at Safeway, she first checks the "Just for U" website for three types of deals.  She starts by selecting manufacturer coupons to load into her loyalty card, then she checks the Club Card for offers like "buy one get one free." The third step is the interesting one.  Safeway will set a particular lower price for Sally good for 90 days on items she buys often.  Clearly this isn't enforcing a new behavior but rather instilling loyalty.  I would love to know exactly how they are determining the personalized price.  Of course bargain hunters can still stack the three offers so they can, for example, get their $4.99 Oatmeal for $0.72. I like this particular question and answer from their website's FAQ: My offers are not that great. Can I tell you what offers I need? That's a good idea. That functionality is not currently available, but we appreciate your input and are constantly improving our just for U program. Stay tuned for exciting enhancements! I suppose if Safeway is tracking all the purchases, they can easily determine whether the customer if profitable.  As long as the customer stays profitable, why not let them determine a few offers themselves?  Food for thought.

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• What do you do to make sure you take proper/enough breaks, while avoiding unwanted side-effects of break taking?

  - by blueberryfields

  preamble It seems to me that computer programmers are one of a select few groups of people who actually take pleasure from sitting in front of computers for long periods of time. Most people in other professions actively dislike their time at computers, and do their best to avoid it (so, I assume, they don't have problems taking breaks). At least for me, having external cues for taking breaks, and clear instructions on what to do with each break (stretch, go for a walk, close my eyes, look into a distance of preferably a few km and focus on faraway objects, etc...), is a must. So far, I've just been making up the breaks and tools to get them as I go along, based on what looks to be low-specificity information found on the net (generic stuff ala ergonomics advice for office staff). This has led to all sorts of side effects - loss of attention as I get distracted if I walk around, breaks in flow with alarm clocks interrupting my thoughts, and people around me assuming I'm low on work due to the frequency of my walking around compared to everyone else. /preamble tl;dr Taking breaks is important My internal break taking system doesn't work, and ad-hoc ones have unwanted side effects What do you do to make sure you take proper breaks? How do you avoid unwanted side-effects, such as getting distracted or interrupting flow or giving your co-workers the impression you're spending a lot of time goofing off?

  Read the article

• Master Data Management – A Foundation for Big Data Analysis

  - by Manouj Tahiliani

  While Master Data Management has crossed the proverbial chasm and is on its way to becoming mainstream, businesses are being hammered by a new megatrend called Big Data. Big Data is characterized by massive volumes, its high frequency, the variety of less structured data sources such as email, sensors, smart meters, social networks, and Weblogs, and the need to analyze vast amounts of data to determine value to improve upon management decisions. Businesses that have embraced MDM to get a single, enriched and unified view of Master data by resolving semantic discrepancies and augmenting the explicit master data information from within the enterprise with implicit data from outside the enterprise like social profiles will have a leg up in embracing Big Data solutions. This is especially true for large and medium-sized businesses in industries like Retail, Communications, Financial Services, etc that would find it very challenging to get comprehensive analytical coverage and derive long-term success without resolving the limitations of the heterogeneous topology that leads to disparate, fragmented and incomplete master data. For analytical success from Big Data or in other words ROI from Big Data Investments, businesses need to acquire, organize and analyze the deluge of data to make better decisions. There will need to be a coexistence of structured and unstructured data and to maintain a tight link between the two to extract maximum insights. MDM is the catalyst that helps maintain that tight linkage by providing an understanding about the identity, characteristics of Persons, Companies, Products, Suppliers, etc. associated with the Big Data and thereby help accelerate ROI. In my next post I will discuss about patterns for co-existing Big Data Solutions and MDM. Feel free to provide comments and thoughts on above as well as Integration or Architectural patterns.

  Read the article

• Logarithmic spacing of FFT subbands

  - by Mykel Stone

  I'm trying to do the examples within the GameDev.net Beat Detection article ( http://archive.gamedev.net/archive/reference/programming/features/beatdetection/index.html ) I have no issue with performing a FFT and getting the frequency data and doing most of the article. I'm running into trouble though in the section 2.B, Enhancements and beat decision factors. in this section the author gives 3 equations numbered R10-R12 to be used to determine how many bins go into each subband: R10 - Linear increase of the width of the subband with its index R11 - We can choose for example the width of the first subband R12 - The sum of all the widths must not exceed 1024 He says the following in the article: "Once you have equations (R11) and (R12) it is fairly easy to extract 'a' and 'b', and thus to find the law of the 'wi'. This calculus of 'a' and 'b' must be made manually and 'a' and 'b' defined as constants in the source; indeed they do not vary during the song." However, I cannot seem to understand how these values are calculated...I'm probably missing something simple, but learning fourier analysis in a couple of weeks has left me Decimated-in-Mind and I cannot seem to see it.

  Read the article

• Scaling Sound Effects and Physics with Framerate

  - by Thomas Bradsworth

  (I'm using XNA and C#) Currently, my game (a shooter) runs flawlessly with 60 FPS (which I developed around). However, if the framerate is changed, there are two major problems: Gunshot sound effects are slower Jumping gets messed up Here's how I play gunshot sounds: update(gametime) { if(leftMouseButton.down) { enqueueBulletForSend(); playGunShot(); } } Now, obviously, the frequency of playGunShot depends on the framerate. I can easily fix the issue if the FPS is higher than 60 FPS by capping the shooting rate of the gun, but what if the FPS is less than 60? At first I thought to just loop and play more gunshots per frame, but I found that this can cause audio clipping or make the bullets fire in "clumps." Now for the second issue: Here's how jumping works in my game: if(jumpKey.Down && canJump) { velocity.Y += 0.224f; } // ... (other code) ... if(!onGround) velocity.Y += GRAVITY_ACCELERATION * elapsedSeconds; position += velocity; The issue here is that at < 60 FPS, the "intermediate" velocity is lost and therefore the character jumps lower. At 60 FPS, the game adds more "intermediate" velocities, and therefore the character jumps higher. For example, at 60 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by X Position increased by (0.224 - X) <-- this is the "intermediate" velocity At 30 FPS, the following occurs: Velocity increased to 0.224 Not on ground, so velocity decreased by 2X Position increased by (0.224 - 2X) <-- the "intermediate" velocity was lost All help is appreciated!

  Read the article

• There's IP but can't reach gateway

  - by icky

  I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• Why does working processors harder use more electrical power?

  - by GazTheDestroyer

  Back in the mists of time when I started coding, at least as far as I'm aware, processors all used a fixed amount of power. There was no such thing as a processor being "idle". These days there are all sorts of technologies for reducing power usage when the processor is not very busy, mostly by dynamically reducing the clock rate. My question is why does running at a lower clock rate use less power? My mental picture of a processor is of a reference voltage (say 5V) representing a binary 1, and 0V representing 0. Therefore I tend to think of of a constant 5V being applied across the entire chip, with the various logic gates disconnecting this voltage when "off", meaning a constant amount of power is being used. The rate at which these gates are turned on and off seems to have no relation to the power used. I have no doubt this is a hopelessly naive picture, but I am no electrical engineer. Can someone explain what's really going on with frequency scaling, and how it saves power. Are there any other ways that a processor uses more or less power depending on state? eg Does it use more power if more gates are open? How are mobile / low power processors different from their desktop cousins? Are they just simpler (less transistors?), or is there some other fundamental design difference?

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• My internet connection slows or dies unexpectedly

  - by genesis

  I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >