Search Results

Search found 733 results on 30 pages for 'geforce'.

Page 19/30 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Blank screen after GRUB (64 bit) - cannot install Ubuntu

  - by peGGi

  My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

  Read the article

• Easy File Locker Locked My Desktop

  - by user20358

  I'm happy with easy file locker, it does as promised. Last night I decided to lock all my files. C:users/Barry Some how my desktop is locked. When I closed EFL my desktop went black. Safe mode is still black. Help Below are my spec's eMachines ET1161-03 CPU: Athlon 64 X2 4400+; CPU speed: 2300GHz; Graphics adapter: nVidia GeForce 6150SE; Monitor: No; Hard drive size: 320GB; WorldBench rating: Fair

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• I am having trouble booting 12.04 keyboard and little man in circle appears and then nothing

  - by Rich J.

  I have a new system (ASUS 990FX mother board, 2 western dig drives, 32 gb memory, an ASUS nvidia video card (GeForce GTX560), and an ASUS DVD Burner (24B1ST)) I am struggling to get the 12.04 cd to work. I have been able to see the little man inside a circle and a graphic of a keyboard? with an == sign between them. Is this is a clue? What does it mean? After that the mauve screen with keyboard and little man in circle goes away. I get a dark background and underline cursor... even hear some work being done reading the rom.... but nothing appears on the screen. I haven't even got to the point where the graphic card is displaying improperly... it is just not displaying anything. If any kind soul has an idea about how to proceed, I am all ears. BTW, I have posted the issue to ASUS... waiting for reply.

  Read the article

• How to get Unity working on dual gpu laptop?

  - by Mourgos

  I recently bought a new laptop (Asus X53S series) that has two GPUs, an NVidia GeForce GT 540M and an integrated Intel GPU (I believe it's called Intel HD graphics 3000). I installed the recommended restricted NVidia drivers after a clean Ubuntu 11.10 install. In the 'additional drivers' program I get the message: "This driver is enabled and in use", although when I try to open the NVidia X Server Settings it says "You do not appear to be using the NVIDIA X driver." which seems to be the case since Ubuntu only starts using Unity 2D. I've had the same issue in 11.04 and I was forced to use the nouveau driver just to get unity working, but since I get quite a few crashes with it I really want to get the propriety driver working this time around. Since I've never had this issue with older laptops, I can only assume it is caused due to the dual gpu configuration. How do I get Ubuntu to use the propriety drivers, or is there any workaround to get the integrated Intel GPU to be ignored by Ubuntu? Alternatively, has anyone got Unity working with a similar setup?

  Read the article

• wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

  - by s1lv3r

  I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

  Read the article

• Can't play Steel Storm, Burning Retribution

  - by Goytor

  I've bougth Steel Storm, Burning Retribution in the Software Center, and every time I run it shows the following message: You have reached this menu due to missing or unlocable content/data You may consider adding -base dir /path/to/game to your launch commandline I've gone to main menu in the preferences tab and changed the launcher to no avail. I've tried running it from console, with /opt/steelstorm-episode2/steelstorm, I got: Game is Steel-Storm using base gamedir gamedata Steel-Storm Linux 01:07:07 Jun 11 2011 - release Playing shareware version. Skeletal animation uses SSE code path DPSOFTRAST available (SSE2 instructions detected) Failed to init SDL joystick subsystem: couldn't exec quake.rc couldn't exec default.cfg execing config.cfg couldn't exec autoexec.cfg Client using an automatically assigned port Client opened a socket on address 0.0.0.0:0 Client opened a socket on address [0:0:0:0:0:0:0:0]:0 Linked against SDL version 1.2.12 Using SDL library version 1.2.14 GL_VENDOR: NVIDIA Corporation GL_RENDERER: GeForce 6150SE nForce 430/PCI/SSE2/3DNOW! GL_VERSION: 2.1.2 NVIDIA 270.41.06 vid.support.arb_multisample 1 vid.mode.samples 0 vid.support.gl20shaders 1 Video Mode: fullscreen 640x480x32x0.00hz S_Startup: initializing sound output format: 48000Hz, 16 bit, 2 channels... Wanted audio Specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 2048 Obtained audio specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 1024 Sound format: 48000Hz, 2 channels, 16 bits per sample CDAudio_Init: No CD in player. Can't get initial CD volume CD Audio Initialized If I try -base /opt/steelstorm-episode2/steelstorm says "command not found".

  Read the article

• How to quickly switch monitors on multi-monitor setup? (W7)

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

  Read the article

• No command window.

  - by Segref

  Using 7 build 7600. Wen I try to open a command window, I just get returned to my previous folder/desktop. If I try to open an extended window I get to the UAC, answer yes and again am returned. A check in Sys info reveals the command prompt is running but I can't see the window. I can have multiple instances of cmd.exe running but still no window. My video adapter is GeForce 7600 and I have no other known problems at this time. Thanks in advance.

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• Impossible to select folders and files with mouse (Ubuntu 12.04)

  - by François

  First-time post for me here (after being a regular reader for two years though) so thank you all for the quality of replies and help provided. My problem is very simple apparently but a tricky one. I just installed the Ubuntu 12.04(1) along with the Gnome3-shell environment on my new pc desktop Acer Aspire X3995 (see config below). Everything work (more or less) so far (I still have problems of sound and disabled 2-fingers gestures with my screen -- which I will have to deal with xconfig settings I think -- though), but the main problem is that I cannot select files/folders with my USB mouse. When I try to double click on them, nothing happen (sometimes one folder or file is selected but then unselected again). Note that the navigation works perfectly from the USB keyboard and from the touch-screen (I am using a 23" wide touch-screen Acer Monitor T231Hbmid). Also, the mouse works perfectly with other menu navigation, with the only difference that the text of certain menus is selected as if I was holding the left click on them. So I assume the problem is only related to the mouse. Needless to say that the usual basic hardware checks have been performed (unplugging, powered-off, etc.). My level is simply "advanced user", meaning that if you provide me with intelligible input I should find my way, but please don't expect too much technical/specific knowledge... :) Please let me know if you need more information on this bug. Now, fingers crossed... and thanks in advance! Ciao, François Config of Acer Aspire X3995: Ubuntu 12.04 / Gnome3-shell environment / Intel Core i5 3450 / nVidia GeForce 605, 1Gb. Screen: Acer Monitor TFT 23" wide T231Hbmid

  Read the article

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• xrander detect only one display

  - by cupakob

  Hi all, i have a problem, to get a picture on my tv over VGA (and also over S-Video to SCART). I've tried it first over xorg, but without success. After that i tried xrand, but xrander detect only my laptop display, here the output bufka [~] $ xrandr -q Screen 0: minimum 1680 x 1050, current 1680 x 1050, maximum 1680 x 1050 default connected 1680x1050+0+0 0mm x 0mm 1680x1050 50.0* 51.0 52.0 Any suggestions, how to solve the problem? My video card is Nvidia Geforce 8600M GT, TV is LG M227WPD and OS Ubuntu Lucid...

  Read the article

• Ubuntu stops using Nvidia driver after kernel upgrade

  - by Daniel

  Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

  Read the article

• Getting Unity 3D working on legacy Nvidia card

  - by user69545

  I installed the latest nVIDIA drivers for my FX5500 card. I understand that the X server version does not officially support this driver or card but was wondering what I can do to get compiz running. I have researched for hours on this issue but cannot come up with an answer for myself. I might be doing all this for nothing but I wanted to at least try. Here is the output of my test: mike@mike-linux-box:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.35 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no So I was wondering what is the "Not Blacklisted" test? Is this the Nouveau Blacklisting? nVIDIA driver did that automatically. Does this need to be removed? Any help would be appreciated. I just want to run compiz effects. Thanks.

  Read the article

• Ugly Boot Screen after upgrading to 12.10

  - by Sir Linuxalot

  Is there a way to change the ugly boot screen in 12.10? It seems to have rolled back to that 8-bit blocky looking thing with tiny orange dots underneath. It then breaks into process code under that, and it looks ghastly. I've read some tutorials on getting Plymouth to do some neat things, but they were for older versions of Ubuntu. I'm running a GeForce GTX 460 if that matters. Any help would be appreciated. Update: I've noticed/found a couple of things. The upgrade on my laptop didn't do this. It still uses the "normal" Ubuntu boot logo (using Plymouth, I assume). So, something is off with my desktop. And, I found and installed Super Boot Manager to see if that would help. With that, I enabled Plymouth and added a new theme, but the machine still boots with the block-ugly logo. Finally, I messed around with Grub on boot and added "nomodeset" after "quiet splash" and added it while deleting "quiet splash." None of these solutions worked. I'll keep hunting...

  Read the article

• nvidia-settings error: nvidia driver not in use

  - by Bastarasov

  I have an Asus with GEFORCE GT520M CUDA (Optimus) and I am running Kubuntu 12.04, 64bit. I am trying to connect an external monitor through DVI and the monitor is not detected. Nvidia settings dont show properly and each time I fire them up there is a warning message: "You do not appear to be using the NVidia X driver. Please, edit...." (you probably know it and heard of this before). I have googled a lot and I have tried some things out but no luck so far. Is there a solution which has worked for someone out there? If so, please be very specific about what I need to do since I am really not good at using the terminal and generally new to ubuntu. I can use the terminal only to copy-paste things. :) Thanks in advance to everyone! ps. Seems like some people dealt with this by fixing the Nvidia settings problem but the instructions have never been clear enough for me to be able to understand.

  Read the article

• Game: Age of Empires sound good but video "out of range"

  - by Ezekiel

  I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Is it possible to modify a color scheme and windows decorations in Xfce4?

  - by Juhele

  just testing PCLinuxOS Phoenix XFCE Edition 2011-07 which I would like to install on my grandpa's PC instead older PCLOS 2009 with KDE3 (which is almost impossible to upgrade). The PC is relatively older one (Sempron 2200+ CPU, MSI K7N2GM2 board with integrated GeForce 440MX series graphics, 1GB RAM and 80GB IDE HDD) and I thought that it is too weak for KDE4. I already used Xfce in the past (Sam Linux 2006 and 2007), but in new Xfce4 I am not able to somehow change the windows color scheme and the windows decorations - the settings manager offers me switching between preinstalled themes but it is possible to modify them with some GUI?

  Read the article

• Computer not working, motherboard is suspect

  - by Arlen Beiler

  I have a problem with my computer. I have a GeForce 6100 M9 Motherboard, which I suspect is broke. The capacitors beside the CPU are corroded and the computer doesn't do anything except start the fans when I push the power button. The problem is that I can't find another motherboard as they apparently don't sell this model anymore. I have tested the Power Supply and it appears to be working. Any advice would be appreciated. Different forums have mentioned that you can replace the capacitors. Any help on this would be appreciated.

  Read the article

• notification icons in Gnome Shell cause lag

  - by Relik

  Before marking this as a duplicate please read my question throughly. OK I am having a bit of a problem with Gnome Shell (3.3.90); Any time there are any icons in the bottom notification bar it causes massive lag when opening/closing and interacting with the Activities panel. If I close all applications that have a notification icon the lag goes away 100%. In My case it's drop box, but any program that requires a icon in the notification area will cause this issue to happen. I am using an AMD A6-3420M running Catalyst 11.11, however I can confirm that this is not a driver issue. I had the same issue on a system running a GeForce 8600GT,and a HD6850, and there is another question on here titled "Gnome Shell lags after a while" where the user is having the same exact issue and He is also using a nVidia card, a 9800GT to be specific. Please, this question has been asked several time and every time people say its a fglrx issue and close the question, or they mark the question as a duplicate and link to a question that says its an fglrx issue. This is not a driver issue, I understand that the AMD drivers caught heat for quite some time for Gnome Shell compatibility issues but those issues have been resolved. Aside from this issue Gnome Shell runs beautiful on my HD650, my A6-3420M, and my 8600GT. Having said that, does anyone know how to correct this issue? Closing Drop Box is not an option for me either.

  Read the article

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >