Search Results

Search found 1427 results on 58 pages for 'graham smith'.

Page 19/58 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Dirty Cache Dell Equallogic Storage Array

  - by Jermal Smith

  has anyone ever run into a dirty cache issue with a Equallogic SAN. Even after replacement of the controller cards in the Equallogic Storage Array fails offline with a dirty cache. I have listed steps here on my blog to bring the SAN online again, however this is not the best solution as it continues to fail. http://jermsmit.com/dirty-cache-dell-equallogic-storage-array/ If you have any info on this please share. Thanks, Jermal

  Read the article

• Blue Screen Of Death after Graphics Card Update

  - by John Smith

  I recently installed the game watch dogs After installing it i upgraded the drivers on my graphics card AMD Radion R9 200 series via the catalyst software and since then windows has been crashing on an ad-hoc basis even when sitting idle I have recieved two different sets of errors OXOOOOOOO1 and VIDEO_SCHEDULER_INTERNAL_ERROR I am running windows 8.1 with the driver 14.4 from AMD My PC shouldnt really be having this problem as it is pretty high spec due to my work Any help would be greatly appreciated as it is driving me up the walls a bit [UPDATE 08-06-2014] I have been looking around online and have crashed the PC a few times now trying to recreate the bug I have looked into the event history viewer and gotten the following errors amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED acpusrsvc: GfxMemServiceInitialize: FAILED amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED amdacpusrsvc acpusrsvc: GfxMemServiceInitialize: FAILED I took some advice from the AMD forums to re-install the old drivers to see if they would work. I uninstalled the old ones first and installed directly from the CD I got the warnings below but the driver installed "successfully" The Warnings are amdacpusrsvc acpusrsvc: ConfigureFrameBufferMemory: FAILED. Hopefully this will spark something off for someone Thanks John

  Read the article

• Server 2012 - Hyper V Manager, RemoteFX missing From Hardware List

  - by Brett Smith

  I've installed Remote Desktop Services and Hyper-V on a server running Windows Server 2012. The Hyper-V settings are showing my GPU as selected for use with RemoteFX as below However when I go to add the hardware to a virtual machine it does not show up in the list of available hardware. Sorry, If I'm a little light on details, I'm not sure where to start on this I've been searching for answers for the better part of the day without much luck

  Read the article

• Moving Portable Office. Have a LAN & Phone line query?

  - by John Smith

  We are about to move a portable office that has 8 phones and 12 lan connections. They are all wired back to our main switch and Nortel bcm200 phone system which are only about 20m (65ft) away. After the move the office will be 180m (600ft) away from these. What is the maximum length of cable a digital phone line can be? I am aware that a lan connection can only be 100m (305ft) when using cat5e utp. Does this rule apply to phone connections also? If so how can I extend beyond 100m for the phones? I was going to install about three cabinets, 3 switches and 6 patch panels for the lan connections but the ideal struck me tonight that maybe I could run a fibre optic line. Would this be feasible? Any feedback on this is greatly appreciated. Thanks

  Read the article

• Java Spotlight Episode 106: Java Security Update @spoofzu

  - by Roger Brinkley

  Java security update with Bruce Lowenthal and Milton Smith. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Apple's Java Mac OS X 2012-006 Update NightHacking Tour Across Europe Four New Java Champions Oracle Announces Availability of Oracle Solaris 11.1 and Oracle Solaris Cluster 4.1 Oracle Announces General Availability of Oracle Application Development Framework Mobile Bean Validation 1.1 Early Draft JSR 107 Early Draft JCP Elections - Meet the Candidates GlassFish switching to JDK-7 only build Events Oct 30-Nov 1, Arm TechCon, Santa Clara, United States of America Oct 31, JFall, Hart van Holland, Netherlands Nov 2-3, JMaghreb, Rabat, Morocco Nov 5-9, Øredev Developer Conference, Malmö, Sweden Nov 13-17, Devoxx, Antwerp, Belgium Nov 20-22, DOAG 2012, Nuremberg, Germany Dec 3-5, jDays, Göteborg, Sweden Dec 4-6, JavaOne Latin America, Sao Paolo, Brazil Dec 14-15, IndicThreads, Pune, India Feature InterviewMilton Smith leads the security program for Java products at Oracle. His responsibilities span from tactical to strategic: definition and communication of the security vision for Java, working with engineering teams and researchers, as well as industry at large. He has over 20+ years of industry experience with emphasis in programming and computer security. Milton previous employer was Yahoo where he lead security for the User Data Analytics(UDA) property.Bruce Lowenthal is the Senior Director of Security Alerts at Oracle Corporation. What’s Cool Andrew Haley on an OpenJDK ARM64 Port Joe Darcy - JDK bug migration: bugs.sun.com now backed by JIRA Marcus Hirt on Using the Mission Control DTrace Plug-in

  Read the article

• Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

  - by bob franklin smith harriet

  I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

  Read the article

• change ip address verizon fios [closed]

  - by John Smith

  One well documented way to change a dynamically assigned ip address is to log into the router configuration settings and change the mac address , disconnect the router and modem, and to turn it all back on. This actually worked with a basic modem connected by ethernet directly to a laptop, spoofing laptop mac address, with a cable internet provider. Now this question is specific to fiber optic internet providers who bundle with tv and internet (verizon fios, comcast xfinity). Verizon fios installation comes with an actiontec router, and there is a built in way to clone the mac address in the router configuration settings. What will happen if the mac address changes from what verizon installed it as? Will they get angry and disconnect service? Will other services other than internet stop working (tv or phone)?

  Read the article

• how to think like a computer scientist java edition exercise 7.2 [on hold]

  - by James Canfield

  I cannot figure out how to write this program, can someone please help me?! The purpose of this method is to practice manipulating St rings. Create a new program called Name.java. This program will take a name string consisting of EITHER a first name followed by a last name (nonstandar d format) or a last name followed by a comma then a first name (standard format). Ie . “Joe Smith” vs. “Smith, Joe”. This program will convert the string to standard format if it is not already in standard format. Write a method called hasComma that takes a name as an argument and that returns a boolean indicating whether it contains a comma. If i t does, you can assume that it is in last name first format. You can use the indexOf String m ethod to help you. Write a method called convertName that takes a name as an argument. It should check whether it contains a comma by calling your hasComma method. If it does, it should just return the string. If not, then it should assume th at the name is in first name first format, and it should return a new string that contains the name converted to last name comma first format. Uses charAt, length, substring, and indexOf methods. In your main program, loop, asking the user for a n ame string. If the string is not blank, call convertName and print the results. The loop terminat es when the string is blank. HINTS/SUGGESTIONS: Use the charAt, length, substring, and indexOf Str ing methods. Use scanner for your input. To get the full line, complete with spaces, use reader.nextLine()

  Read the article

• I would like to prevent these entries from being added to the eventlog.

  - by David Smith

  Our client's application EventLog is getting filled up with warnings due to a bug in the Microsoft SQL Server report viewer control, http://support.microsoft.com/kb/973219. They have thousands of users running reports so this is making their eventlog hard to use and they want them removed on a frequent basis. I tried using PowerShell to remove the events, but that does not seem possible. Is there a way to prevent these entries from being written to the event log in the first place? I'm thinking I would like to filter out events where event source="ASP.NET 2.0.50727.0", eventId ="1309" and Message contains "Reserved.ReportViewerWebControl.axd"

  Read the article

• Symlink - Permission Denied

  - by John Smith

  I'm facing an interesting problem with plenty of Permission Denied outputs when using SymLinks Linux: Slackware 13.1 Directory with Symlink: root@Tower:/var/lib# ls -lah drwxr-xr-x 8 root root 0 2012-12-02 20:09 ./ drwxr-xr-x 15 root root 0 2012-12-01 21:06 ../ lrwxrwxrwx 1 ntop ntop 21 2012-12-02 20:09 ntop - /mnt/user/media/ntop6/ Symlinked Directory: root@Tower:/mnt/user/media# ls -lah drwxrwx--- 1 nobody users 1.4K 2012-12-02 19:28 ./ drwxrwx--- 1 nobody users 128 2012-11-18 16:06 ../ drwxrwxrwx 1 ntop ntop 320 2012-12-02 20:22 ntop6/ What I have done: I have used chown -h ntop:ntop on the ntop directory in /var/lib Just to be sure, I have chmod 777 to both directories Permission denied actions: root@Tower:/var/lib# sudo -u ntop mkdir /var/lib/ntop/test mkdir: cannot create directory `/var/lib/ntop/test': Permission denied Any ideas?

  Read the article

• openvpn& iptables -- portforwarding and gateway

  - by Smith.Lai

  The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

  Read the article

• cloud/grid computing

  - by tom smith

  Hi guys. I'm appologizing in advance to the guys who will tell me this isn't a tech/server/IT issue! But I've been beating my head around this for a couple of days now. I'm trying figure out who to talk to, or which company I can approach to try to see if there are Grid/Cloud Computing companies who have programs setup to deal with colleges. I'm dealing with a compsci course, and we're looking at a few projects that would require a great deal of computing/computational resources. But in calling different companies (HP/Rackspace/etc..) I'm either not getting through to the right depts, or to the right people, or the companies just aren't setup for this. There are plenty of companies who have discounts for desktop software/hardware, but who in the biz deals with discounts/offerings for Cloud/Grid Computing solutions?? Any thoughts/pointers would be greatly appreciated. Thanks -tom

  Read the article

• Mobile Intel® GMA 4500MHD boost

  - by Andy Smith

  My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

  Read the article

• Issues Installing PHP Memcache module

  - by smith

  I am trying to install memcache on my VPS. When I type $ pecl install memcache I get this error checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. ERROR: `/root/tmp/pear/memcache/configure --enable-memcache-session=yes' failed Any ideas what the issue could be?

  Read the article

• vmware - ACE, Workstation - how to manage remoe clients??

  - by tom smith

  Hi. Exploring Vmware products/services and have a few questions. As I understand VM, you can use VMWare Workstation to create a VM of a target machine/box/OS. Let's call this VM, "foo". If I have 100 client PCs in my dept, and I want to install the VM (foo) on each client, and also manage the remote VM instances of (foo). How can I accompish this? Let's assume that the client machines are running Windows7, and have the vmplayer app installed on the box. I'm looking to do the following kinds of actions regarding the remote client machines: -Update the foo VM/image with new updated copies -Make sure that every VM "foo" has the same user, but a unique passwd -Monitor the traffic/status of each client VM "foo" oin each client -Start/Stop each client VN "foo" from the master console -Etc... Can this be accomplished? How would I do it, what services/products would I need? I've tried toalking to a few of the pre-sales guys in VMWare, and got nowhere, other than telling me to email my questions!! Looking at google shed more insight, but I still have questions. So, if you have detailed VMWare understanding, pointers to consultants, or resellers who can help, all pointers are greatly appreciated. Thanks -tom

  Read the article

• Migrating XenServer VMs from Intel to AMD servers

  - by John Smith

  I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

  Read the article

• Move the Start Menu in Windows 7 Taskbar

  - by Aaron Smith

  Is there anyway to move the Start Menu button on the taskbar in Windows 7? I've decided to try moving the taskbar to the left so I have more vertical screen real estate, but I would like the start menu to be at the bottom of the bar. Is there anyway to move it?

  Read the article

• fedora13 mouse change -I Beam

  - by tom smith

  hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

  Read the article

• fedora13 mouse change -I Beam

  - by tom smith

  hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

  Read the article

• Server 2008 Active Directory DNS Entries Deleted. Dcdiag unable to contact local AD controller.

  - by Jim Smith

  I've never seen anything like this. At a potential customer site, I noticed that the PC's were all unable to locate the domain controller and netlogon was failing. I fixed the DNS entries on the client PC's so the AD server was DNS server and tried to rejoin the domain. The PC was unable to locate the domain controller. On the server, I checked the DNS settings and while there is the high level AD folder, every single entry related to Active Directory appears to have been completely deleted. There are no backups from what I can tell and this has been happening for 6 months at least. Does anyone have any recommendations for repairing this? Thanks.

  Read the article

• windows service "soft link"

  - by fred smith

  I would like to be able to have a nice management tool to allow the rollout of different versions of a windows service over time. for example I would like to deploy my software (windows service) in version numbered folders, e.g. c:\wss\v1.0 c:\wss\v1.1 etc however I dont want to have to reinstall the windows service each time but rather would like to be able to easily point the windows service manager to the new folder. Are there tools to get this done? NB: I have used Windows Junctions before (from sysinternals) however I am wondering if there is a nice GUI tool to do this.

  Read the article

• Using standard e-mail address as user system wide name

  - by PeterMmm

  I'm going to re-build a very old Lotus Notes infrastructure coming from 4.x towards 8.5. I'm trying to setup Domino so that all user names should be of a single string or the internet e-mail address. For example the user "John Smith/ACME" should be in the whole system jsmith or [email protected] . I still get jsmith/ACME all around. Where it is most annoying is in the NAB when creating a new message. Is there a way to get all addresses in uniform standard e-mail adress format at least in mail ? The mixup in the destination like "John Smith/ACME, [email protected]" confused the users.

  Read the article

• Are Plesk server backups useful?

  - by Michael T. Smith

  I'm working for a startup now, and I'm the programmer. Because of our small team size, I'm also handling the server management for now (until we get a dedicated server administrator.) I've never used Plesk before, and the server we're using (a Media Temple Dedicated Virtual server) had it installed when I got here. One of my first jobs was to set up backups: Plesk was already running it's nightly server-wide backups. I created a small script to dump the web app, it's DBs and any assets, tar them, store them, and then copy them to another small server we have (to backup the backups.) But, we're constantly running into hard drive space issues because of the Plesk backups. And I'm wondering, are they useful? If I have the web app and all of it's assets, I could easily enough get another server up and running. Do we need to keep running Plesk's backups? Thoughts?

  Read the article

• How do I set permissions structure for multiple users editing multiple sites in /var/www on Ubuntu 9

  - by Michael T. Smith

  I'm setting up an Ubuntu server that will have 3 or 4 VirtualHosts that I want users to be able to work in (add new files, edit old files, etc.). I currently plan on storing the sites in /var/www but wouldn't be opposed to moving it. I know how to add new users, I know how to add new groups. I'm unsure of the best way to handle users being only able to edit some sites. I read over the answers here in this question, so I was thinking I could setup a group and add users to that group, but then they'd all have essentially the same permissions. Am I just going to have to assign each user specific permissions? Or is there a better way of handling this? Added: I should also note, that I'll have each user login in via SSH/sFTP. The users would never need to do anything else on the server.

  Read the article

• Linux Development System Layout.Configuration

  - by tom smith

  Hi. Looking to create a linux based development/test system. I'm the only one using it. Will be using a variant of rhel/centos/fedora, with a 640G drive, and an external 250G as a kind of backup. Looking for thoughts/comments on the layout/config of the drive for the install/creation process. My primary goal is to be able to "backup"/restore the work product so i'd like OS to be separate from everything else. Thoughts/commnents/ponters appreciated. Thanks

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >