Search Results

Search found 17267 results on 691 pages for 'home router'.

Page 19/691 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Issues with Verizon's "Network Extender" device talking on my home network.

    - by Logan
    I recently switched my phone service to Verizon from ATT, and I get somewhat spotty service in my house. I called them and they sent me a "network extender" device for free. Its a femtocell that connects to my home network. The directions that come with it are very dumbed down, basically just say to connect it to your router and put it near a window (so it can get a GPS signal, it has to make sure its within the correct area before operating). The problem I'm having is the network light on it stays red. The troubleshooting information that came with it tells me this means there is a bad network connection. Its connected through an ASUS router running DD-WRT. No other devices on my network have a problem with it, including a Western Digital WDLIVE device, mine and my wife's cell phones (via wifi), a Wii, and an Xbox. If I connect the device directly to my cable modem, the light goes blue (which means good) and it starts working. So this tells me that its definately a configuration issue with my router. Verizon basically washed their hands of me when I connected it to my cable modem, and told me that its a router issue and to try a different router. Because normal people just have extra routers laying around their houses... When I connect it to the router, I can watch the DHCP Clients list on the status page, and the MAC of the network extender quickly fills up the clients list, grabbing every available DHCP address. Its like it grabs an address, can't connect to the internet, releases it, grabs another, then another, then another. So in the DHCP server settings I assigned a static IP to its MAC. This made it quit doing what it was doing before, but its still not working. I found the ports I needed to open on verizon's website, and opened them in the port forwarding config on my router. This still didn't help. So, I tried setting the network extender device's IP as the DMZ IP on the router. This still did no good. I called Verizon back and got the tech to write up a report which he passed on to a "senior network tech" who I got a call back from a few hours ago. This guy told me that while an ASUS router isn't listed as a supported device, he's not really sure why its not working. He suggested restoring the firmware to stock ASUS firmware and trying again. I have a very hard time believing its DD-WRT doing this, since every other device is working just fine with it. But its also not the Network Extender, since it works just fine when connected directly to the modem. At this point I'm out of ideas, and the next step is to restore the stock firmware on my router, and then going to walmart and getting a linksys WRT-54G to try. Is there anything else I could try before going that drastic? Cliffs- -Network extender won't work behind router, works when connected directly to cable modem. -Extender goes nuts when allowed to pick its own DHCP address, I had to assign it a static IP. -Won't work when correct ports are forwarded to it -Won't work with a DMZ address.

    Read the article

  • Iptables based router inside KVM virtual machine

    - by Anton
    I have KVM virtual machine (CentOS 6.2 x64), it has 2 NIC: eth0 - real external IP 1.2.3.4 (simplified example instead of real one) eth1 - local internal IP 172.16.0.1 Now I'm trying to make port mapping 1.2.3.4:80 = 172.16.0.2:80 Current iptables rules: # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A PREROUTING -p tcp -m tcp -d 1.2.3.4 --dport 80 -j DNAT --to-destination 172.16.0.2:80 COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 But there is nothing works, I mean it does not forwards that port. Similar configuration without virtualization seems to be working. What am I missing? Thanks!

    Read the article

  • Access 2 sites on same machine behind a router

    - by Luc
    Hello, I have several machines on my lan. On of them is running 2 web sites, first_web_site and second_web_site (each one in a dedicated NameVirtualHost). Another machine is running another site third_web_site. I would like to be able to access each one, within internet, with the url: first_web_site.domain.tld second_web_site.domain.tld third_web_site.domain.tld knowing that 2 sites are on the same machine. Can Apache help me to do this ? I have a machine that will have a apache server to be used for proxy purposes. I was talk to set up virtualhost on this one and use proxy server but I do not know how to do this. Could you please give me hints ? Thanks a lot, Luc

    Read the article

  • OSS Router firmwares

    - by Cherian
    DD-WRT, Open WRT , Tomato or Third-party firmware projects ? What are the compelling reasons to choose between these? I used to be a great DD-WRT fan until I realized that the author was deceiving users by publishing it as a OSS, but made it very cumbersome to download the source and change it (requires you to download GB’s of source files) .Also their bandwidth monitoring feature was part of the paid version, which IMHO is a killer. Having said that, DD-WRT just worked. And I think that’s great..

    Read the article

  • Thomson router reboots unexpectedly with an apparent remote connection attempt

    - by ChrisF
    I've got a weird problem. Every so often my rooter (a Thomson TG585 v8 running version 8.2.7.8 of it's firmware) reboots itself. It seems to be associated with this message in the event log: FIREWALL replay check (1 of 2): Protocol: ICMP Src ip: 183.178.144.177 Dst ip: xxx.xxx.xxx.xxx Type: Destination Unreachable Code: Host Unreacheable xxx.xxx.xxx.xxx is my external IP address 183.178.144.177 resolves to 183178144177.ctinets.com We've got a student from Hong Kong staying with us at the moment and the reboots seem coincidental with him starting up his laptop. I say this because a check on ctinets.com shows it to be based in Hong Kong, though our guest's laptop doesn't appear to have any software related to this company installed. I say "apparently" as he is running the Chinese version of Windows and his English doesn't cover technical subjects like this. I know this is an incoming message but I was assuming that it was in response to something on the student's laptop which is why the first thought was malware, but we've got anti virus on all the other machines and have run malwarebytes on his with a negative result so I don't think the problem is due to a virus or (known) trojan. What else can I do to stop this and identify the cause?

    Read the article

  • Toshiba laptop won't connect to D-link router

    - by user3314725
    This is Team 4786 Nicolet Fear FIRST FRC robotics, our problem is we cant get our D-Link (DAP-1522) to connect to our Toshiba (TECRA R950) laptop wireless. It has connected before in the past and we don't know why it is not working anymore. The D-links still function correctly and we think our problem lies within the Toshiba. EDIT:The Toshiba connects to the school Wifi, and other things (small FRC drive station) connect to the D-link, but they won't connect to each other.

    Read the article

  • Decreasing lagging on router, while gaming

    - by user2699451
    I had absolutely no idea where to post this question and get a professional answer for it but here goes... Okay, so I guess everyone whos is reading this had played online, and so I was playing LoL again tonight and my brother decided that now was a great time to go on youtube and start watching a movie, so my ping (connecting from South Africa to EU west server) is around 190-220 average, however it started spiking to 2000 and average was 600-800, so it arised the question, how ther hell can I "kick" him off for the time being I tried reasoning it out with him but its like playing chess with a pigeon, he's studying to be an engineer, and I just cant win an argument with him, so i need to step it up a level... I have in the past used the aireplay method by sending deauth packets but it only helped so much, is there another way of either kicking a peer of the local wifi or decreasing the lag spikes while in session or even splitting the bandwidth equally in 2 or 3,etc What do I do p.s. sorry if off topic, if it is not appropriate, just say which website will be able to help or assist me...

    Read the article

  • Arch linux as a wireless router with a USB modem

    - by orlox
    I'm trying to act as an access point to share the internet I get from a USB modem on arch linux. From what I've seen so far, most of what I've found deals with installing particular distributions like DD-WRT to this purpose, but I haven't been able to find any particular and comprehensive solution. Has anyone done this before? I don't know how relevant it might be, but my wireless card is a broadcom device.

    Read the article

  • Setting the Server Port in D-Link Router for eMailing Logs

    - by Synetech
    Does anyone know how to set the port for the email server in the Status->Log section of the D-Link DI-524? I’ve tried the setting below but it does not seem to work. I don’t want to use the default port 25 if I can avoid it. (No, the server and email address in the snap are irrelevant, you can replace the server with hotmail.com or whatever and address with a valid one; the question I am trying to figure out is how to set the port.)

    Read the article

  • Local Only 3G Router via Broadband Device?

    - by GateKiller
    I am looking for the name/type of device which does the following: Connects to the internet via ethernet or wireless and then produces a "fake" 3G signal for my iPhone to connect to. The 3G siginal in my office is very weak or non-existant and I need a way of boosting or replacing it.

    Read the article

  • Firewall/Router upgrade

    - by Atlas
    We've been using a SonicWall TZ170 for several years, it's been working fine with occasional glitches. Now we switched to a 100Mpbs broadband, and the firewall has become the bottleneck for internet access because its max throughput is around 20-30Mpbs. Any ideas for a replacement? Brand/Model?

    Read the article

  • Port forwarding with router in bridged mode

    - by jipje44
    let say R1 and R2. R1 is in bridged mode and connected to R2. R2 is a dhcp server. To R2 is an internet camera connected. When i am on R2 and i do enter the ip of the camera then it will work without a problem. However i want to acces the camera from the outside. So in R2 i forwarded a port (done this one other networks without problems). However I can't connect from the outside. Can R1 blocking the port? I cant log in on R1 as long as it is in bridged mode.

    Read the article

  • Making a home group

    - by Siddharth Warrier
    I have two computers in my house they are laptop and desktop and I use internet which is of wired connection and it has a modem. The modem has 1 LAN port and 1 USB port. So what I did is that I connected the desktop to the LAN which had Windows 7 Home Premium OS and Laptop to the USB which had Windows 7 Home Basic. As home group can be made with windows 7 home premium and above versions I made it via desktop. The home group was established and the data can be exchanged.But one problem I was able to access internet in desktop but not in laptop. So I tried to share internet but I am not able to do so..... So anyone there to help me ???????

    Read the article

  • Connect work laptop (domain) to home workgroup

    - by jjeaton
    Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

    Read the article

  • Weather Logging Software on Windows Home Server

    - by Cruiser
    I'm looking for some weather logging software that I can run as a Windows Home Server add-in, or as a service on my Home Server, so I don't need to log into my Home Server to log weather data. I have an Oregon Scientific WMR918 weather station, and an HP MediaSmart EX485 Windows Home Server. The two are currently connected through a serial bluetooth adapter, but that shouldn't matter as the computer sees it basically as a serial device. I'm currently using Cumulus to log data and upload to Weather Underground, but it is a regular windows application, so I need to remain logged into my Home Server by RDP in order to run the software (I disconnect, but don't log off so the session remains open). Ideally I would like something to run as a service or WHS add-in, so that it runs all the time without logging in, can log data from my WMR918, and can upload to Weather Underground. Thanks!

    Read the article

  • Internet in the router but not in the local network.

    - by TheMouse
    I have a PC and a laptop (Windows 7 - both) which should connect through router to Internet. The router is Linksys wrt120. My ISP is using PPPoE. I have connected the Internet cable to the router, clone the MAC of my PC, writing the username and the password for my Internet connection. After seconds the router has acquired IP from my ISP. I have used the administration panel of Linksys and with the help of the ping and tracert commands which are built into it - I can connect to the world, outside the network. The problem is when I try to connect the PC or the laptop to the network. There's no problem here. The DHCP server of the router gives them appropriate addresses. The problem is that they couldn't connect to either Internet addresses (google.com) or IP addresses. But they can connect to the router and its control panel. I tried several times, reset the router..but there's no Internet..still.

    Read the article

  • Cant connect to home server

    - by user52141
    Trying to figure out what I might be doing wrong. I installed XAMPP - and everything looks fine. If I go to localhost everything comes right up. But when I go to my IP address, I just get a message that the browser could not connect to it. I go into my router and set up port forwarding for port 80 etc, and I even tried putting the server as a DMZ - still nothing. I turned the firewall off to see if that was interfering in some way, then uninstalled it completely for good measure, made no difference. I'm out of ideas.. oh, and yes I have a static IP address.

    Read the article

  • Problem linking two Cisco routers with a static route

    - by Chris Kaczor
    I'm trying to link two Cisco routers with a static route and I haven't been able to get it working as expected. Here is the basic setup: Router 1 - WRV210 - 192.168.1.1 - connected to cable modem Router 2 - RV120W - 192.168.2.1 I already have several machines on Router 1 that are working and I want to setup Router 2 with a few other machines on the different subnet. Here is what I've configured: Connected the WAN port on Router 2 to a LAN port on Router 1 Configured Router 1 to give 192.168.1.2 to Router 2 via DHCP Configured Router 1 with a static route (192.168.2.0 mask 255.255.255.0) to 192.168.1.2 using the LAN & Wireless interface Disabled the firewall on Router 2 (since it is covered by Router 1) Configured Router 2 to "Router" mode instead of "NAT" mode Configured Router 2 with a static route (192.168.1.0 mask 255.255.255.0) to 192.168.1.1 using the WAN interface From the research I've done I think that should be enough but things aren't working exactly as expected: Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) A machine on Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) A machine on Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) Router 1 and a machine on Router 1 can ping 192.168.1.2 (Router 2 itself) I'm confused as to why Router 1 cannot talk to the 192.168.2.0/255.255.255.0 subnet. Any help would be greatly appreciated.

    Read the article

  • PHP - Is possible to find if user is browsing from beind a Router and get Router Info

    - by Fábio Antunes
    Hello guys. I think it isn't possible just using PHP, but just to be sure. Is it possible for PHP to know if the user is accessing the web from behind a Router? And if yes, how can i get some information about that router, like: Router Name, Brand, Serial Number, ... Users connected in the same network. Can PHP also find the Local IP Address for the visitor in that Network? A few simple questions. To which i haven't found a solid answer, and i tough that some PHP genius could tell me. And teach me. Thanks for your help.

    Read the article

  • deploying a simple html website with eclipse EE & tomcat 7 & router for pc not in LAN

    - by hawkeye
    Hello everyone and thanks for your time, first of all - I want to make a note - I can see the website from my own pc which is the only one connected to the (netgear dgn1000) router, and I can do so with several browsers on my pc, but - when I try and do a port forwarding so that I could access this simple html file (which in the way would use a simple servlet class) I can't seem to view it I have configured my router (both the "services" and the "firewall" sections), and I have also changed my LAN properties according to my ISP's explanation (via phone) : instead of choosing the "obtain an IP address automatically" I have chosen the "use the following IP address, with IP address of 10.0.0.1 (this was also set in the router's port forwarding), Subnet mask of 255.255.255.0, default gateway by checking the same value as seen in the cmd when executing the command ipconfig /all after doing so I've changed the DNS to use the address (just the preferred and not the alternate one) given with the ipconfig /all and still - nothing :/ is it something in my network settings or in my deployment of the eclipse/tomcat ? any help would be greatly appreciated, thanks :)

    Read the article

  • very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

    - by gojira
    I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

    Read the article

  • Is It Possible for My Router to Wear Out?

    - by Jason Fitzpatrick
    Day after day your humble and hard working router holds your home network together and links it to the greater internet. Is it possible to work it to death? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >