Search Results

Search found 1729 results on 70 pages for 'identifier'.

Page 19/70 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Unable to mount an LVM Hard-drive after upgrade

    - by Bruce Staples
    I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

    Read the article

  • Ubuntu installation does not recognize drive partinioning

    - by Woltan
    I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

    Read the article

  • Why does Ubuntu 13.10 not detect my Win7 partition?

    - by goutham
    I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

    Read the article

  • How to help FGLRX detect a device

    - by user113416
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

    Read the article

  • Data Source Security Part 3

    - by Steve Felts
    In part one, I introduced the security features and talked about the default behavior.  In part two, I defined the two major approaches to security credentials: directly using database credentials and mapping WLS user credentials to database credentials.  Now it's time to get down to a couple of the security options (each of which can use database credentials or WLS credentials). Set Client Identifier on Connection When "Set Client Identifier" is enabled on the data source, a client property is associated with the connection.  The underlying SQL user remains unchanged for the life of the connection but the client value can change.  This information can be used for accounting, auditing, or debugging.  The client property is based on either the WebLogic user mapped to a database user using the credential map Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} or is the database user parameter directly from the getConnection() method, based on the “use database credentials” setting described earlier. To enable this feature, select “Set Client ID On Connection” in the Console.  See "Enable Set Client ID On Connection for a JDBC data source" http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/EnableCredentialMapping.html in Oracle WebLogic Server Administration Console Help. The Set Client Identifier feature is only available for use with the Oracle thin driver and the IBM DB2 driver, based on the following interfaces. For pre-Oracle 12c, oracle.jdbc.OracleConnection.setClientIdentifier(client) is used.  See http://docs.oracle.com/cd/B28359_01/network.111/b28531/authentication.htm#i1009003 for more information about how to use this for auditing and debugging.   You can get the value using getClientIdentifier()  from the driver.  To get back the value from the database as part of a SQL query, use a statement like the following. “select sys_context('USERENV','CLIENT_IDENTIFIER') from DUAL”. Starting in Oracle 12c, java.sql.Connection.setClientInfo(“OCSID.CLIENTID", client) is used.  This is a JDBC standard API, although the property values are proprietary.  A problem with setClientIdentifier usage is that there are pieces of the Oracle technology stack that set and depend on this value.  If application code also sets this value, it can cause problems. This has been addressed with setClientInfo by making use of this method a privileged operation. A well-managed container can restrict the Java security policy grants to specific namespaces and code bases, and protect the container from out-of-control user code. When running with the Java security manager, permission must be granted in the Java security policy file for permission "oracle.jdbc.OracleSQLPermission" "clientInfo.OCSID.CLIENTID"; Using the name “OCSID.CLIENTID" allows for upward compatible use of “select sys_context('USERENV','CLIENT_IDENTIFIER') from DUAL” or use the JDBC standard API java.sql.getClientInfo(“OCSID.CLIENTID") to retrieve the value. This value in the Oracle USERENV context can be used to drive the Oracle Virtual Private Database (VPD) feature to create security policies to control database access at the row and column level. Essentially, Oracle Virtual Private Database adds a dynamic WHERE clause to a SQL statement that is issued against the table, view, or synonym to which an Oracle Virtual Private Database security policy was applied.  See Using Oracle Virtual Private Database to Control Data Access http://docs.oracle.com/cd/B28359_01/network.111/b28531/vpd.htm for more information about VPD.  Using this data source feature means that no programming is needed on the WLS side to set this context; it is set and cleared by the WLS data source code. For the IBM DB2 driver, com.ibm.db2.jcc.DB2Connection.setDB2ClientUser(client) is used for older releases (prior to version 9.5).  This specifies the current client user name for the connection. Note that the current client user name can change during a connection (unlike the user).  This value is also available in the CURRENT CLIENT_USERID special register.  You can select it using a statement like “select CURRENT CLIENT_USERID from SYSIBM.SYSTABLES”. When running the IBM DB2 driver with JDBC 4.0 (starting with version 9.5), java.sql.Connection.setClientInfo(“ClientUser”, client) is used.  You can retrieve the value using java.sql.Connection.getClientInfo(“ClientUser”) instead of the DB2 proprietary API (even if set setDB2ClientUser()).  Oracle Proxy Session Oracle proxy authentication allows one JDBC connection to act as a proxy for multiple (serial) light-weight user connections to an Oracle database with the thin driver.  You can configure a WebLogic data source to allow a client to connect to a database through an application server as a proxy user. The client authenticates with the application server and the application server authenticates with the Oracle database. This allows the client's user name to be maintained on the connection with the database. Use the following steps to configure proxy authentication on a connection to an Oracle database. 1. If you have not yet done so, create the necessary database users. 2. On the Oracle database, provide CONNECT THROUGH privileges. For example: SQL> ALTER USER connectionuser GRANT CONNECT THROUGH dbuser; where “connectionuser” is the name of the application user to be authenticated and “dbuser” is an Oracle database user. 3. Create a generic or GridLink data source and set the user to the value of dbuser. 4a. To use WLS credentials, create an entry in the credential map that maps the value of wlsuser to the value of dbuser, as described earlier.   4b. To use database credentials, enable “Use Database Credentials”, as described earlier. 5. Enable Oracle Proxy Authentication, see "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. 6. Log on to a WebLogic Server instance using the value of wlsuser or dbuser. 6. Get a connection using getConnection(username, password).  The credentials are based on either the WebLogic user that is mapped to a database user or the database user directly, based on the “use database credentials” setting.  You can see the current user and proxy user by executing: “select user, sys_context('USERENV','PROXY_USER') from DUAL". Note: getConnection fails if “Use Database Credentials” is not enabled and the value of the user/password is not valid for a WebLogic Server user.  Conversely, it fails if “Use Database Credentials” is enabled and the value of the user/password is not valid for a database user. A proxy session is opened on the connection based on the user each time a connection request is made on the pool. The proxy session is closed when the connection is returned to the pool.  Opening or closing a proxy session has the following impact on JDBC objects. - Closes any existing statements (including result sets) from the original connection. - Clears the WebLogic Server statement cache. - Clears the client identifier, if set. -The WebLogic Server test statement for a connection is recreated for every proxy session. These behaviors may impact applications that share a connection across instances and expect some state to be associated with the connection. Oracle proxy session is also implicitly enabled when use-database-credentials is enabled and getConnection(user, password) is called,starting in WLS Release 10.3.6.  Remember that this only works when using the Oracle thin driver. To summarize, the definition of oracle-proxy-session is as follows. - If proxy authentication is enabled and identity based pooling is also enabled, it is an error. - If a user is specified on getConnection() and identity-based-connection-pooling-enabled is false, then oracle-proxy-session is treated as true implicitly (it can also be explicitly true). - If a user is specified on getConnection() and identity-based-connection-pooling-enabled is true, then oracle-proxy-session is treated as false.

    Read the article

  • How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

    - by racerror
    My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • How to mount drive in /media/userName/ like nautilus do using udisks

    - by Bsienn
    As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

    - by kmm
    This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

    Read the article

  • Grub not loading after Windows 8 Install

    - by RazorXsr
    My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

    Read the article

  • Unable to mount location ubuntu 12.10

    - by Rajesh
    I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

    Read the article

  • How do I get 12.04 to recognize swap partition so that I can hibernate?

    - by Kayla
    I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

    Read the article

  • Mounting a new hard drive (sda1) to my existing filesystem

    - by shank22
    I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

    Read the article

  • Goto for the Java Programming Language

    - by darcy
    Work on JDK 8 is well-underway, but we thought this late-breaking JEP for another language change for the platform couldn't wait another day before being published. Title: Goto for the Java Programming Language Author: Joseph D. Darcy Organization: Oracle. Created: 2012/04/01 Type: Feature State: Funded Exposure: Open Component: core/lang Scope: SE JSR: 901 MR Discussion: compiler dash dev at openjdk dot java dot net Start: 2012/Q2 Effort: XS Duration: S Template: 1.0 Reviewed-by: Duke Endorsed-by: Edsger Dijkstra Funded-by: Blue Sun Corporation Summary Provide the benefits of the time-testing goto control structure to Java programs. The Java language has a history of adding new control structures over time, the assert statement in 1.4, the enhanced for-loop in 1.5,and try-with-resources in 7. Having support for goto is long-overdue and simple to implement since the JVM already has goto instructions. Success Metrics The goto statement will allow inefficient and verbose recursive algorithms and explicit loops to be replaced with more compact code. The effort will be a success if at least twenty five percent of the JDK's explicit loops are replaced with goto's. Coordination with IDE vendors is expected to help facilitate this goal. Motivation The goto construct offers numerous benefits to the Java platform, from increased expressiveness, to more compact code, to providing new programming paradigms to appeal to a broader demographic. In JDK 8, there is a renewed focus on using the Java platform on embedded devices with more modest resources than desktop or server environments. In such contexts, static and dynamic memory footprint is a concern. One significant component of footprint is the code attribute of class files and certain classes of important algorithms can be expressed more compactly using goto than using other constructs, saving footprint. For example, to implement state machines recursively, some parties have asked for the JVM to support tail calls, that is, to perform a complex transformation with security implications to turn a method call into a goto. Such complicated machinery should not be assumed for an embedded context. A better solution is just to expose to the programmer the desired functionality, goto. The web has familiarized users with a model of traversing links among different HTML pages in a free-form fashion with some state being maintained on the side, such as login credentials, to effect behavior. This is exactly the programming model of goto and code. While in the past this has been derided as leading to "spaghetti code," spaghetti is a tasty and nutritious meal for programmers, unlike quiche. The invokedynamic instruction added by JSR 292 exposes the JVM's linkage operation to programmers. This is a low-level operation that can be leveraged by sophisticated programmers. Likewise, goto is a also a low-level operation that should not be hidden from programmers who can use more efficient idioms. Some may object that goto was consciously excluded from the original design of Java as one of the removed feature from C and C++. However, the designers of the Java programming languages have revisited these removals before. The enum construct was also left out only to be added in JDK 5 and multiple inheritance was left out, only to be added back by the virtual extension method methods of Project Lambda. As a living language, the needs of the growing Java community today should be used to judge what features are needed in the platform tomorrow; the language should not be forever bound by the decisions of the past. Description From its initial version, the JVM has had two instructions for unconditional transfer of control within a method, goto (0xa7) and goto_w (0xc8). The goto_w instruction is used for larger jumps. All versions of the Java language have supported labeled statements; however, only the break and continue statements were able to specify a particular label as a target with the onerous restriction that the label must be lexically enclosing. The grammar addition for the goto statement is: GotoStatement: goto Identifier ; The new goto statement similar to break except that the target label can be anywhere inside the method and the identifier is mandatory. The compiler simply translates the goto statement into one of the JVM goto instructions targeting the right offset in the method. Therefore, adding the goto statement to the platform is only a small effort since existing compiler and JVM functionality is reused. Other language changes to support goto include obvious updates to definite assignment analysis, reachability analysis, and exception analysis. Possible future extensions include a computed goto as found in gcc, which would replace the identifier in the goto statement with an expression having the type of a label. Testing Since goto will be implemented using largely existing facilities, only light levels of testing are needed. Impact Compatibility: Since goto is already a keyword, there are no source compatibility implications. Performance/scalability: Performance will improve with more compact code. JVMs already need to handle irreducible flow graphs since goto is a VM instruction.

    Read the article

  • Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

    - by ladaghini
    I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

    Read the article

  • Mounting ddrescue image after recovery (in over my head)

    - by BorgDomination
    I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

    Read the article

  • Data Source Security Part 2

    - by Steve Felts
    In Part 1, I introduced the default security behavior and listed the various options available to change that behavior.  One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values.   The direct use of database credentials is relatively new to WLS, based on customer feedback.  Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password).  By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source.  If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used.  Because of this defaulting mechanism, you should be careful what permissions are granted to the default user.  Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user.  In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New.  2) Second, create the mapping.  In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead.  For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call.  Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source.  For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request.  It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source.  This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map.  Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map.  This is enabled by setting the “use-database-credentials” to true.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations.  When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0).  Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”.  The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used.  If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used.  If you specify a user/password when getting a connection, that user will be used for the credentials.  WLS users are not involved at all in the data source connection process.

    Read the article

  • Azure WNS to Win8 - Push Notifications for Metro Apps

    - by JoshReuben
    Background The Windows Azure Toolkit for Windows 8 allows you to build a Windows Azure Cloud Service that can send Push Notifications to registered Metro apps via Windows Notification Service (WNS). Some configuration is required - you need to: Register the Metro app for Windows Live Application Management Provide Package SID & Client Secret to WNS Modify the Azure Cloud App cscfg file and the Metro app package.appxmanifest file to contain matching Metro package name, SID and client secret. The Mechanism: These notifications take the form of XAML Tile, Toast, Raw or Badge UI notifications. The core engine is provided via the WNS nuget recipe, which exposes an API for constructing payloads and posting notifications to WNS. An application receives push notifications by requesting a notification channel from WNS, which returns a channel URI that the application then registers with a cloud service. In the cloud service, A WnsAccessTokenProvider authenticates with WNS by providing its credentials, the package SID and secret key, and receives in return an access token that the provider caches and can reuse for multiple notification requests. The cloud service constructs a notification request by filling out a template class that contains the information that will be sent with the notification, including text and image references. Using the channel URI of a registered client, the cloud service can then send a notification whenever it has an update for the user. The package contains the NotificationSendUtils class for submitting notifications. The Windows Azure Toolkit for Windows 8 (WAT) provides the PNWorker sample pair of solutions - The Azure server side contains a WebRole & a WorkerRole. The WebRole allows submission of new push notifications into an Azure Queue which the WorkerRole extracts and processes. Further background resources: http://watwindows8.codeplex.com/ - Windows Azure Toolkit for Windows 8 http://watwindows8.codeplex.com/wikipage?title=Push%20Notification%20Worker%20Sample - WAT WNS sample setup http://watwindows8.codeplex.com/wikipage?title=Using%20the%20Windows%208%20Cloud%20Application%20Services%20Application – using Windows 8 with Cloud Application Services A bit of Configuration Register the Metro apps for Windows Live Application Management From the current app manifest of your metro app Publish tab, copy the Package Display Name and the Publisher From: https://manage.dev.live.com/Build/ Package name: <-- we need to change this Client secret: keep this Package Security Identifier (SID): keep this Verify the app here: https://manage.dev.live.com/Applications/Index - so this step is done "If you wish to send push notifications in your application, provide your Package Security Identifier (SID) and client secret to WNS." Provide Package SID & Client Secret to WNS http://msdn.microsoft.com/en-us/library/windows/apps/hh465407.aspx - How to authenticate with WNS https://appdev.microsoft.com/StorePortals/en-us/Account/Signup/PurchaseSubscription - register app with dashboard - need registration code or register a new account & pay $170 shekels http://msdn.microsoft.com/en-us/library/windows/apps/hh868184.aspx - Registering for a Windows Store developer account http://msdn.microsoft.com/en-us/library/windows/apps/hh868187.aspx - Picking a Microsoft account for the Windows Store The WNS Nuget Recipe The WNS Recipe is a nuget package that provides an API for authenticating against WNS, constructing payloads and posting notifications to WNS. After installing this package, a WnsRecipe assembly is added to project references. To send notifications using WNS, first register the application at the Windows Push Notifications & Live Connect portal to obtain Package Security Identifier (SID) and a secret key that your cloud service uses to authenticate with WNS. An application receives push notifications by requesting a notification channel from WNS, which returns a channel URI that the application then registers with a cloud service. In the cloud service, the WnsAccessTokenProvider authenticates with WNS by providing its credentials, the package SID and secret key, and receives in return an access token that the provider caches and can reuse for multiple notification requests. The cloud service constructs a notification request by filling out a template class that contains the information that will be sent with the notification, including text and image references.Using the channel URI of a registered client, the cloud service can then send a notification whenever it has an update for the user. var provider = new WnsAccessTokenProvider(clientId, clientSecret); var notification = new ToastNotification(provider) {     ToastType = ToastType.ToastText02,     Text = new List<string> { "blah"} }; notification.Send(channelUri); the WNS Recipe is instrumented to write trace information via a trace listener – configuratively or programmatically from Application_Start(): WnsDiagnostics.Enable(); WnsDiagnostics.TraceSource.Listeners.Add(new DiagnosticMonitorTraceListener()); WnsDiagnostics.TraceSource.Switch.Level = SourceLevels.Verbose; The WAT PNWorker Sample The Azure server side contains a WebRole & a WorkerRole. The WebRole allows submission of new push notifications into an Azure Queue which the WorkerRole extracts and processes. Overview of Push Notification Worker Sample The toolkit includes a sample application based on the same solution structure as the one created by theWindows 8 Cloud Application Services project template. The sample demonstrates how to off-load the job of sending Windows Push Notifications using a Windows Azure worker role. You can find the source code in theSamples\PNWorker folder. This folder contains a full version of the sample application showing how to use Windows Push Notifications using ASP.NET Membership as the authentication mechanism. The sample contains two different solution files: WATWindows.Azure.sln: This solution must be opened with Visual Studio 2010 and contains the projects related to the Windows Azure web and worker roles. WATWindows.Client.sln: This solution must be opened with Visual Studio 11 and contains the Windows Metro style application project. Only Visual Studio 2010 supports Windows Azure cloud projects so you currently need to use this edition to launch the server application. This will change in a future release of the Windows Azure tools when support for Visual Studio 11 is enabled. Important: Setting up the PNWorker Sample Before running the PNWorker sample, you need to register the application and configure it: 1. Register the app: To register your application, go to the Windows Live Application Management site for Metro style apps at https://manage.dev.live.com/build and sign in with your Windows Live ID. In the Windows Push Notifications & Live Connect page, enter the following information. Package Display Name PNWorker.Sample Publisher CN=127.0.0.1, O=TESTING ONLY, OU=Windows Azure DevFabric 2. 3. Once you register the application, make a note of the values shown in the portal for Client Secret,Package Name and Package SID. 4. Configure the app - double-click the SetupSample.cmd file located inside the Samples\PNWorker folder to launch a tool that will guide you through the process of configuring the sample. setup runs a PowerShell script that requires running with administration privileges to allow the scripts to execute in your machine. When prompted, enter the Client Secret, Package Name, and Package Security Identifier you obtained previously and wait until the tool finishes configuring your sample. Running the PNWorker Sample To run this sample, you must run both the client and the server application projects. 1. Open Visual Studio 2010 as an administrator. Open the WATWindows.Azure.sln solution. Set the start-up project of the solution as the cloud project. Run the app in the dev fabric to test. 2. Open Visual Studio 11 and open the WATWindows.Client.sln solution. Run the Metro client application. In the client application, click Reopen channel and send to server. à the application opens the channel and registers it with the cloud application, & the Output area shows the channel URI. 3. Refresh the WebRole's Push Notifications page to see the UI list the newly registered client. 4. Send notifications to the client application by clicking the Send Notification button. Setup 3 command files + 1 powershell script: SetupSample.cmd –> SetupWPNS.vbs –> SetupWPNS.cmd –> SetupWPNS.UpdateWPNSCredentialsInServiceConfiguration.ps1 appears to set PackageName – from manifest Client Id package security id (SID) – from registration Client Secret – from registration The following configs are modified: WATWindows\ServiceConfiguration.Cloud.cscfg WATWindows\ServiceConfiguration.Local.cscfg WATWindows.Client\package.appxmanifest WatWindows.Notifications A class library – it references the following WNS DLL: C:\WorkDev\CountdownValue\AzureToolkits\WATWindows8\Samples\PNWorker\packages\WnsRecipe.0.0.3.0\lib\net40\WnsRecipe.dll NotificationJobRequest A DataContract for triggering notifications:     using System.Runtime.Serialization; using Microsoft.Windows.Samples.Notifications;     [DataContract]     [KnownType(typeof(WnsAccessTokenProvider))] public class NotificationJobRequest     {               [DataMember] public bool ProcessAsync { get; set; }          [DataMember] public string Payload { get; set; }         [DataMember] public string ChannelUrl { get; set; }         [DataMember] public NotificationType NotificationType { get; set; }         [DataMember] public IAccessTokenProvider AccessTokenProvider { get; set; }         [DataMember] public NotificationSendOptions NotificationSendOptions{ get; set; }     } Investigated these types: WnsAccessTokenProvider – a DataContract that contains the client Id and client secret NotificationType – an enum that can be: Tile, Toast, badge, Raw IAccessTokenProvider – get or reset the access token NotificationSendOptions – SecondsTTL, NotificationPriority (enum), isCache, isRequestForStatus, Tag   There is also a NotificationJobSerializer class which basically wraps a DataContractSerializer serialization / deserialization of NotificationJobRequest The WNSNotificationJobProcessor class This class wraps the NotificationSendUtils API – it periodically extracts any NotificationJobRequest objects from a CloudQueue and submits them to WNS. The ProcessJobMessageRequest method – this is the punchline: it will deserialize a CloudQueueMessage into a NotificationJobRequest & send pass its contents to NotificationUtils to SendAsynchronously / SendSynchronously, (and then dequeue the message).     public override void ProcessJobMessageRequest(CloudQueueMessage notificationJobMessageRequest)         { Trace.WriteLine("Processing a new Notification Job Request", "Information"); NotificationJobRequest pushNotificationJob =                 NotificationJobSerializer.Deserialize(notificationJobMessageRequest.AsString); if (pushNotificationJob != null)             { if (pushNotificationJob.ProcessAsync)                 { Trace.WriteLine("Sending the notification asynchronously", "Information"); NotificationSendUtils.SendAsynchronously( new Uri(pushNotificationJob.ChannelUrl),                         pushNotificationJob.AccessTokenProvider,                         pushNotificationJob.Payload,                         result => this.ProcessSendResult(pushNotificationJob, result),                         result => this.ProcessSendResultError(pushNotificationJob, result),                         pushNotificationJob.NotificationType,                         pushNotificationJob.NotificationSendOptions);                 } else                 { Trace.WriteLine("Sending the notification synchronously", "Information"); NotificationSendResult result = NotificationSendUtils.Send( new Uri(pushNotificationJob.ChannelUrl),                         pushNotificationJob.AccessTokenProvider,                         pushNotificationJob.Payload,                         pushNotificationJob.NotificationType,                         pushNotificationJob.NotificationSendOptions); this.ProcessSendResult(pushNotificationJob, result);                 }             } else             { Trace.WriteLine("Could not deserialize the notification job", "Error");             } this.queue.DeleteMessage(notificationJobMessageRequest);         } Investigation of NotificationSendUtils class - This is the engine – it exposes Send and a SendAsyncronously overloads that take the following params from the NotificationJobRequest: Channel Uri AccessTokenProvider Payload NotificationType NotificationSendOptions WebRole WebRole is a large MVC project – it references WatWindows.Notifications as well as the following WNS DLL: \AzureToolkits\WATWindows8\Samples\PNWorker\packages\WnsRecipe.0.0.3.0\lib\net40\NotificationsExtensions.dll Controllers\PushNotificationController.cs Notification related namespaces:     using Notifications;     using NotificationsExtensions;     using NotificationsExtensions.BadgeContent;     using NotificationsExtensions.RawContent;     using NotificationsExtensions.TileContent;     using NotificationsExtensions.ToastContent;     using Windows.Samples.Notifications; TokenProvider – initialized from the Azure RoleEnvironment:   IAccessTokenProvider tokenProvider = new WnsAccessTokenProvider(         RoleEnvironment.GetConfigurationSettingValue("WNSPackageSID"),         RoleEnvironment.GetConfigurationSettingValue("WNSClientSecret")); SendNotification method – calls QueuePushMessage method to create and serialize a NotificationJobRequest and enqueue it in a CloudQueue [HttpPost]         public ActionResult SendNotification(             [ModelBinder(typeof(NotificationTemplateModelBinder))] INotificationContent notification,             string channelUrl,             NotificationPriority priority = NotificationPriority.Normal)         {             var payload = notification.GetContent();             var options = new NotificationSendOptions()             {                 Priority = priority             };             var notificationType =                 notification is IBadgeNotificationContent ? NotificationType.Badge :                 notification is IRawNotificationContent ? NotificationType.Raw :                 notification is ITileNotificationContent ? NotificationType.Tile :                 NotificationType.Toast;             this.QueuePushMessage(payload, channelUrl, notificationType, options);             object response = new             {                 Status = "Queued for delivery to WNS"             };             return this.Json(response);         } GetSendTemplate method: Create the cshtml partial rendering based on the notification type     [HttpPost]         public ActionResult GetSendTemplate(NotificationTemplateViewModel templateOptions)         {             PartialViewResult result = null;             switch (templateOptions.NotificationType)             {                 case "Badge":                     templateOptions.BadgeGlyphValueContent = Enum.GetNames(typeof( GlyphValue));                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;                 case "Raw":                     ViewBag.ViewData = templateOptions;                     result = PartialView("_Raw");                     break;                 case "Toast":                     templateOptions.TileImages = this.blobClient.GetAllBlobsInContainer(ConfigReader.GetConfigValue("TileImagesContainer")).OrderBy(i => i.FileName).ToList();                     templateOptions.ToastAudioContent = Enum.GetNames(typeof( ToastAudioContent));                     templateOptions.Priorities = Enum.GetNames(typeof( NotificationPriority));                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;                 case "Tile":                     templateOptions.TileImages = this.blobClient.GetAllBlobsInContainer(ConfigReader.GetConfigValue("TileImagesContainer")).OrderBy(i => i.FileName).ToList();                     ViewBag.ViewData = templateOptions;                     result = PartialView("_" + templateOptions.NotificationTemplateType);                     break;             }             return result;         } Investigated these types: ToastAudioContent – an enum of different Win8 sound effects for toast notifications GlyphValue – an enum of different Win8 icons for badge notifications · Infrastructure\NotificationTemplateModelBinder.cs WNS Namespace references     using NotificationsExtensions.BadgeContent;     using NotificationsExtensions.RawContent;     using NotificationsExtensions.TileContent;     using NotificationsExtensions.ToastContent; Various NotificationFactory derived types can server as bindable models in MVC for creating INotificationContent types. Default values are also set for IWideTileNotificationContent & IToastNotificationContent. Type factoryType = null;             switch (notificationType)             {                 case "Badge":                     factoryType = typeof(BadgeContentFactory);                     break;                 case "Tile":                     factoryType = typeof(TileContentFactory);                     break;                 case "Toast":                     factoryType = typeof(ToastContentFactory);                     break;                 case "Raw":                     factoryType = typeof(RawContentFactory);                     break;             } Investigated these types: BadgeContentFactory – CreateBadgeGlyph, CreateBadgeNumeric (???) TileContentFactory – many notification content creation methods , apparently one for every tile layout type ToastContentFactory – many notification content creation methods , apparently one for every toast layout type RawContentFactory – passing strings WorkerRole WNS Namespace references using Notifications; using Notifications.WNS; using Windows.Samples.Notifications; OnStart() Method – on Worker Role startup, initialize the NotificationJobSerializer, the CloudQueue, and the WNSNotificationJobProcessor _notificationJobSerializer = new NotificationJobSerializer(); _cloudQueueClient = this.account.CreateCloudQueueClient(); _pushNotificationRequestsQueue = _cloudQueueClient.GetQueueReference(ConfigReader.GetConfigValue("RequestQueueName")); _processor = new WNSNotificationJobProcessor(_notificationJobSerializer, _pushNotificationRequestsQueue); Run() Method – poll the Azure Queue for NotificationJobRequest messages & process them:   while (true)             { Trace.WriteLine("Checking for Messages", "Information"); try                 { Parallel.ForEach( this.pushNotificationRequestsQueue.GetMessages(this.batchSize), this.processor.ProcessJobMessageRequest);                 } catch (Exception e)                 { Trace.WriteLine(e.ToString(), "Error");                 } Trace.WriteLine(string.Format("Sleeping for {0} seconds", this.pollIntervalMiliseconds / 1000)); Thread.Sleep(this.pollIntervalMiliseconds);                                            } How I learned to appreciate Win8 There is really only one application architecture for Windows 8 apps: Metro client side and Azure backend – and that is a good thing. With WNS, tier integration is so automated that you don’t even have to leverage a HTTP push API such as SignalR. This is a pretty powerful development paradigm, and has changed the way I look at Windows 8 for RAD business apps. When I originally looked at Win8 and the WinRT API, my first opinion on Win8 dev was as follows – GOOD:WinRT, WRL, C++/CX, WinJS, XAML (& ease of Direct3D integration); BAD: low projected market penetration,.NET lobotomized (Only 8% of .NET 4.5 classes can be used in Win8 non-desktop apps - http://bit.ly/HRuJr7); UGLY:Metro pascal tiles! Perhaps my 80s teenage years gave me a punk reactionary sense of revulsion towards the Partridge Family 70s style that Metro UX seems to have appropriated: On second thought though, it simplifies UI dev to a single paradigm (although UX guys will need to change career) – you will not find an easier app dev environment. Speculation: If LightSwitch is going to support HTML5 client app generation, then its a safe guess to say that vnext will support Win8 Metro XAML - a much easier port from Silverlight XAML. Given the VS2012 LightSwitch integration as a thumbs up from the powers that be at MS, and given that Win8 C#/XAML Metro apps tend towards a streamlined 'golden straight-jacket' cookie cutter app dev style with an Azure back-end supporting Win8 push notifications... --> its easy to extrapolate than LightSwitch vnext could well be the Win8 Metro XAML to Azure RAD tool of choice! The hook is already there - :) Why else have the space next to the HTML Client box? This high level of application development abstraction will facilitate rapid app cookie-cutter architecture-infrastructure frameworks for wrapping any app. This will allow me to avoid too much XAML code-monkeying around & focus on my area of interest: Technical Computing.

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • CommunicationException with 'not recognized sequence' message in WCF.

    - by brain_pusher
    Hello, I get a CommunicationException while using WCF service. The message is: The remote endpoint no longer recognizes this sequence. This is most likely due to an abort on the remote endpoint. The value of wsrm:Identifier is not a known Sequence identifier. The reliable session was faulted. The exception is thrown in a moment after a contract method was called. Before calling contract method the channel state is Opened. I restore my service client after catching this exception and for some time it works fine. But then this error occures again. It seems like some timeout is exceeded, but I can't understand which one exactly. I use wsHttpBinding with reliableSession enabled. The InactivityTimeout is set to half an hour and I'm sure it's not exceeded, because exception is thrown earlier.

    Read the article

  • Logback DBAppender url

    - by pedro mendes
    I'm trying to use Logback's DBAppender. My logback.xml has the following appender: </appender> <appender name="DatabaseAppender" class="ch.qos.logback.classic.db.DBAppender"> <connectionSource class="ch.qos.logback.core.db.DriverManagerConnectionSource"> <driverClass>oracle.jdbc.OracleDriver</driverClass> <url>jdbc:oracle:thin:@URL:PORT:SERVICEID</url> <user>USER</user> <password>PASS</password> </connectionSource> </appender> the url given works with other java classes in the same project but it fails with logback giving the following error ORA-00904: "ARG3": invalid identifier at java.sql.SQLException: ORA-00904: "ARG3": invalid identifier where ARG3 is the <url>jdbc:oracle:thin:@URL:PORT:SERVICEID</url>

    Read the article

  • locate the crash code from the crash log in my ip4 device

    - by lu yuan
    How could I locate the crash code from the crash log in my ip4 device? As the crashed thread 0 presents a serial frameworks and main.m, I couldn't locate the accurate code launched this crash and debug it. Any suggestion? Thanks in advance! Incident Identifier: B6BD84B7-CE0A-485D-A877-0FD0F5B75933 CrashReporter Key: b0b97a37f2a1e4911ce2ef34e1793e028463bb67 Hardware Model: iPhone3,1 Process: myApp [11615] Path: /var/mobile/Applications/28AE71F2-36CA-4A87-83D9-07DF2DFE74F1/myApp.app/myApp Identifier: myApp Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2012-06-09 21:12:22.792 +0800 OS Version: iPhone OS 5.1 (9B176) Report Version: 104 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000b Crashed Thread: 0 Thread 0 name: Dispatch queue: com.apple.main-thread Thread 0 Crashed: 0 libobjc.A.dylib 0x36721f78 0x3671e000 + 16248 1 MapKit 0x34e7ace6 0x34e68000 + 77030 2 CoreFoundation 0x3525f1f4 0x35247000 + 98804 3 Foundation 0x311b6740 0x31112000 + 673600 4 CoreFoundation 0x352d4acc 0x35247000 + 580300 5 CoreFoundation 0x352d4298 0x35247000 + 578200 6 CoreFoundation 0x352d303e 0x35247000 + 573502 7 CoreFoundation 0x3525649e 0x35247000 + 62622 8 CoreFoundation 0x35256366 0x35247000 + 62310 9 GraphicsServices 0x36552432 0x3654e000 + 17458 10 UIKit 0x3234ce76 0x3231b000 + 204406 11 myApp 0x0001bac0 main (main.m:16) 12 myApp 0x0001ba80 start + 32

    Read the article

  • SOM Algorithm Matlab HELP

    - by Tim
    I'm trying to pass a txt file to som_read_data from a GUI......i created a function that takes a txt file from the GUI and then passes it to som_read_data..but i'm getting some errors...here are a list of some of the errors.....any one with ideas? ??? Error using ==> ftell Invalid file identifier. Use fopen to generate a valid file identifier. Error in ==> som_read_data at 169 fpos1 = ftell(fid); c1 = 0; % read first non-comment line Error in ==> prog_som at 3 sD = som_read_data(m);

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >