Search Results

Search found 3567 results on 143 pages for 'instructions'.

Page 19/143 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Problem with DualBooting Ubuntu 13.10 and Win7

    - by VinArrow
    this is my first post here on AskUbuntu, not first time using it though. I wanted to install Ubuntu 13.10 on my PC to have all my work stuff there and leave Win7 for gaming. So i did my research on how to Dual Boot when you already have Win7 installed, here are the steps i took Used Disk Management on Win7 and shrunk that partition, leaving 80GB free for Ubuntu. Made a Bootable pendrive following the instructions on Ubuntu`s website. During the installation steps there was supposed to be a Install alongside Win7, but there wasnt, so i chose Something else. Everything was fine and i was able to install Ubuntu no problem on my unallocated 80GB partition (76GB Ubuntu + 4GB swap) There was a prompt for me to restart my PC and so I did expecting to see the dual boot screen (grub right?) Now, when i restarted my PC, Grub never showed up and it booted straight to Windows. Then I did some more research and found out that that could happen. Tried three things then Plugging in bootable pendrive again and selected Try Ubuntu without installing. Then i followed some instructions found here (How can I repair grub? (How to get Ubuntu back after installing Windows?)) and i could chroot into my Ubuntu install just fine. Repaired grub as instructed on that link, restarted the PC and booted straight into Win7 again. Again, used the bootable pen drive to Try Ubuntu... and used the Boot-repair tool (recommended repair). Again, booted straight into Win7. Lastly, i installed easyBCD on my Win7 and made a new entry for Ubuntu (Linux/BSD). When i rebooted the PC, there was the option to choose between Win7 and Linux, chose linux and it didnt work, taking me straight to a command line-like enviroment that read Minimum bash like scripting or something, as if I didn`t have a Linux OS installed. So, I thought I`d try and repair my Ubuntu install. And during the Installation method step there was the choice to install alongside Ubuntu 13.10! and that right there drove me crazy. Here is a screenshot of gparted showing how things are set up now http://imageshack.us/f/801/77u3.png/ Notice on the left-hand side how i can access my installation files just fine. sdb1- win7 reserved space, sdb2- win7 OS, sdb3- 76GB ubuntu install, sdb5- 4GB swap area. Does anyone know why my Ubuntu 13.10 is not being recognized? and what should I do to get it working? Thanks and sorry for the long read and bad english! (BIOS = legacy)

    Read the article

  • How can I get the touch screen working on a motion computing m1400

    - by pgcudahy
    I picked up a motion computing m1400 for cheap and was successful in getting 11.04 installed on it but have run into trouble getting the touch screen to work. This is one of the older tablet pcs that need a special pen for the touch screen. There are instructions out there for older versions of Ubuntu but they usually rely on a package called wacom-tools that is no longer in the repos. Is there any support for these old tablets or has time passed them by?

    Read the article

  • How to Evict a Failed Node and Add it Back to SQL Server 2005 Cluster

    Adding and removing nodes in SQL Server Clusters is not so difficult, and instructions on how to do so abound on the internet. However, mismanagement when adding/removing nodes can quickly become a 'gotcha' that wastes time. Bo Chen offers insight into some of those scenarios that are not normally covered in the standard online documents.

    Read the article

  • How Writing Helps in Link Building?

    Just by having an authoritative voice over a certain topic, you could easily help yourself in building links to your website. You can do this by writing how-to guides, lists, instructions and other "expert" articles.

    Read the article

  • Allocating drive space?

    - by Nadim A. Hachem
    I'm trying to install ubuntu but i already have windows 7 on the same computer and i can't afford losing it. everything went perfectly well until allocating drivespace. i dont have the option to "install it besides another operating system " like in the instructions. i only get this menu when my external hard disk is plugged in, but i dont want that. any help assigning partitions? because i have no clue about what to do there this is what the partition menu gives

    Read the article

  • 12.04 login terminal screen only

    - by Reinere
    So I just went through driver update. The os froze so I had to hard reboot the pc. Now I just get the login promt in terminal. so i try to run startx. codeError: API mismatch: the NVIDIA kernel module has version 304.43 but this NVIDIA driver Component has version 295.49| i just got this error... I have to type sudo su then modprobe ndiswrapper to get my wifi to work, so step by step instructions after that would be greatly helpful

    Read the article

  • Custom Ubuntu 12.04 distro not booting

    - by user1427152
    After following the instructions at: https://help.ubuntu.com/community/LiveCDCustomizationFromScratch; I installed xorg, gdm, and gnome. For some reason when I try to run it on both of my computers and qemu, it freezes up. Sadly I cant access a console to view all my logs, but I do have a dump of the boot process. I can also add and remove packages by ch-rooting into the compressed file-system. DUMP: http://pastebin.com/qRZFAAeM

    Read the article

  • Why is the error, dd: /dev/rdisk1bs=1m: Operation not supported, popping up while trying to instal ubuntu on usb?

    - by Jesse S
    I am trying to install ubuntu onto my flash drive using the instructions from the website, http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx , and after step 8, the terminal asks for my password, which it accepts and then pops u this error message, dd: /dev/rdisk1bs=1m: Operation not supported. I have also tried making the last m in that statement capital and then the system does not ask me for my password but the error message still pops up. What is happening and why?

    Read the article

  • How to get GUI back after freeze interrupted an Nvidia driver update?

    - by Reinere
    I just went through a driver update. The OS froze, so I had to hard reboot the PC. Now I just get the login prompt in terminal. So, I tried to run startx. codeError: API mismatch: the NVIDIA kernel module has version 304.43 but this NVIDIA driver Component has version 295.49` I just got this error. I have to type sudo su then modprobe ndiswrapper to get my Wi-Fi to work, so step by step instructions after that would be greatly helpful.

    Read the article

  • No upgrade option when booting from USB (12.04)

    - by Ramzi Njeim
    I am trying to upgrade my ubuntu 11.10, i know that it is better to upgrade using a live cd/usb, i booted from the live usb, followed the instructions as usual, but only found three options: Cleen install Install alongside your other operating systems Other The upgrade choice was missing. I even tried installing it after running ubuntu 12.04 from usb, and ended up with the same result. I have a dual boot Ubuntu 11.10 and Windows 7, i think it is only seeing the windows 7 and missing the ubuntu 11.10 partition. Any help ?

    Read the article

  • How can I install Ubuntu on my Nexus 7 while being able to recover from an Nandroid backup?

    - by MagicFab
    I use CyanogenMod and ClockWork Recovery on my Nexus 7. How can my existing full nandroid backup be used to restore my device after installing Ubuntu? The instructions assume "recovery" would mean re-flashing the vanilla image, at factory, data-wiped condition. It would be useful to provide a .zip that can be flashed via Clockwork (or other) recovery usin ROM Manager or booting into recovery and back to whatever Nandroid backup there is - much as any other ROM is provided/used.

    Read the article

  • Deal Registration Moves to Oracle Partner Store (OPS)

    - by rituchhibber
    In November 2012, Oracle's partner deal registration process will move to the Oracle Partner Store (OPS). During this time, OPS will become the single source for partners to register deals, obtain deal status, and place orders. Detailed instructions on each of these tasks can be found on the OPS Information Page. OPS will offer several enhancements to the deal registration process, including: Simplified Registration Form Easier Product Selection Expanded Browser Support Shared Registration Visibility Between VAD and VAR Pre-set Customer Selection From Partner Ordering Base

    Read the article

  • chrome does not load

    - by SRC SRC
    hey there i followed the instructions on this page to change permission of all files in a directory in /var http://superuser.com/questions/47463/how-to-change-permissions-on-all-files-in-a-directory-and-when-new-files-are-ad and now chrome doesn't work.. it doesn't even start. is there a way to fix this. i've tried changing the permission of /opt folder but still no use. thanks! P.S i changed the username and group name to www-data

    Read the article

  • Can't access external USB storage after updating to 12.10

    - by user99252
    I installed Ubuntu 12.04 after Windows failed me and Samsung got a bit pissy about providing any help. I then upgraded to 12.10 after a week or two and suddenly my external USB devices no longer work. The same devices I plugged in are no longer recognised. As I say, I'm only a user of Ubuntu for a fortnight, so any advice and directions to very simple instructions, would be appreciated greatly. I've seen this asked elsewhere, but the advice was to ask again if you needed clarification.

    Read the article

  • BIOS interrupts, privilege levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only address RAM? Next thing I don't understand is about privilege levels. I know about ring model, and access rights, but how does the CPU know which privilege level has executed an instruction? I think that these privileges apply only when intruction is trying to address memory, but how does an application get its privilege level? I mean I know its level 3, but how is it set? And last thing, I know that paging is address scheme that is used to support aplication-transparent virtual memory, or swapping, but I could not find any information about how paging is tied with protected mode. Like if paging is like next mode independent of protected mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first address application space, then offset, and then paging folder, page and offset once again?

    Read the article

  • BIOS interrupts, priviledge levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only adress RAM? Next thing I dont understand is about priviledge levels. I know about ring model, and acess rights, but how CPU knows which priviledge level has executed instruction? I think that these priviledges apply only when intruction is trying to adress memory, but how applications gets its priviledge level? I mean I know its level 3, but how its set? And last thing, I know that paging is adress scheme that is used to support aplication-transparent virtual memory, or swaping, but I could not find any informations about how is paging tied with protected mode. Like if paging is like next mode independent of protectet mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first adress application space, than offset, and than paging folder, page and offset once again? Thank you for every response.

    Read the article

  • CodeIgniter's index.php

    - by 01010011
    Hi, Following CodeIngiter's installation instructions, I extracted CodeIgniter into XAMPP's htdocs folder and placed its index.php at the root. When I navigated to the following url h t t p://127.0.0.1/index.php I got the following error messages: Warning: require_once(C:\xampp\htdocs/system/codeigniter/CodeIgniter.php) [function.require-once]: failed to open stream: No such file or directory in C:\xampp\htdocs\index.php on line 115 Fatal error: require_once() [function.require]: Failed opening required 'C:\xampp\htdocs/system/codeigniter/CodeIgniter.php' (include_path='.;C:\xampp\php\PEAR') in C:\xampp\htdocs\index.php on line 115 When I checked line 115 in the index.php, it stated: require_once BASEPATH.'codeigniter/CodeIgniter'.EXT; Experimenting a little, I put CodeIniter's "system" folder at the root as well, and it worked, providing me access to CodeIgniter's Welcome page, but the instructions did not say to do this. Experimenting further, when I put back the "system" folder and navigated to the original place where the index.php h t t p://127.0.0.1/codeigniter_1.7.2/index.php it worked. But myquestion is, how do I get to the CodeIgniter's welcome page by placing only the index.php in XAMPP's htdocs as instructed by CodeIgniter? Any assistance will be appreciated.

    Read the article

  • Problems configuring an SSH tunnel to a Nexentastor appliance for use with headless Crashplan

    - by Rob Smallshire
    Problem I am attempting to configure an SSH tunnel to a NexentaStor appliance from either a Windows or Linux computer so that I can connect a Crashplan Desktop GUI to a headless Crashplan server running on the Nexenta box, according to these instructions on the Crashplan support site: Connect to a Headless CrashPlan Desktop. So far, I've failed to get a working SSH tunnel from from either either a Windows client (using Putty) or a Linux client (using command line SSH). I'm fairly sure the problem is at the receiving end with NexentaStor. A blog article - CrashPlan for Backup on Nexenta - indicates that it could be made to work only after "after enabling TCP forwarding in Nexenta in /etc/ssh/sshd_config" - although I'm not sure how to go about that or specifically what I need to do. Things I have tried Ensuring the Crashplan server on the Nexenta box is listening on port 4243 $ netstat -na | grep LISTEN | grep 42 127.0.0.1.4243 *.* 0 0 131072 0 LISTEN *.4242 *.* 0 0 65928 0 LISTEN Establishing a tunnel from a Linux host: $ ssh -L 4200:localhost:4243 admin:10.0.0.56 and then, from another terminal on the Linux host, using telnet to verify the tunnel: $ telnet localhost 4200 Trying ::1... Connected to localhost. Escape character is #^]'. with nothing more, although the Crashplan server should respond with something. From Windows, using PuTTY have followed the instructions on the Crashplan support site to establish an equivalent tunnel, but then telnet on Windows gives me no response at all and the Crashplan GUI can't connect either. The PuTTY log for the tunnelled connection shows reasonable output: ... 2011-11-18 21:09:57 Opened channel for session 2011-11-18 21:09:57 Local port 4200 forwarding to localhost:4243 2011-11-18 21:09:57 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2011-11-18 21:09:57 Started a shell/command 2011-11-18 21:10:09 Opening forwarded connection to localhost:4243 but the telnet localhost 4200 command from Windows does nothing at all - it just waits with a blank terminal. On the NexentaStor server I've examined the /etc/ssh/sshd_config file and everything seems 'normal' - and I've commented out the ListenAddress entries to ensure that I'm listening on all interfaces. How can I establish a tunnel, and how can I verify that it is working?

    Read the article

  • Troubles installing/starting Redis via Resque

    - by Craig Flannagan
    Trying to complete instructions for Resque/Redis installation here: https://github.com/defunkt/resque/blob/master/README.markdown Am stuck at where I'm trying to start up Redis via Resque at the following command: Craig:/usr/local/src/resque$ rake redis:start (in /usr/local/src/resque) Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] (See full trace by running task with --trace) Rerunning with --trace (showing only part of trace): Craig:/usr/local/src/resque$ rake redis:start --trace (in /usr/local/src/resque) ** Invoke redis:start (first_time) ** Execute redis:start Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] /Users/craigflannagan/.rvm/gems/ruby-1.9.2-head@foo/gems/rake-0.8.7/lib/rake.rb:995:in `block in sh' Not sure what is wrong here - by the way, when I did those instructions $ git clone git://github.com/defunkt/resque.git $ cd resque $ PREFIX=<your_prefix> rake redis:install dtach:install $ rake redis:start I wasn't sure whether or not I was supposed to be doing #1 from within the Rails project, or if I was supposed to have the git clone create a new folder outside the Rails project (in this case, I chose to have folder created outside the project).

    Read the article

  • How to boot Linux from a 16gb USB flash drive

    - by Chris Harris
    I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

    Read the article

  • Problems configuring DB2 CLI/ODBC System DSN ODBC Data Source Administrator

    - by Komyg
    I am trying to create a System DSN ODBC connection to a DB2 9.5 database, but I am getting a very strange problem. I've looked through the internet and found the following page that has some instructions on how I should proceed: http://www.ryslander.com/how-to-install-and-configure-db2-odbc-driver/. I followed these instructions and I am able to create a new System DSN, however when I try to configure it it seems as if my configurations don't work at all. For example, when I click on the "Configure" button on my System DSN and I add a TCP/IP protocol configuration on the "Advanced Settings" tab and click "Ok", no errors appear, but when I click on "Configure" again my TCP/IP setting has vanished. This happened to all my other configurations, such as database name, username, password etc. Could you help me figure out what I am doing wrong? Note: my user is in the administrator group and I am using a Windows Server 2008 R2 Enterprise x64. UPDATE I managed to create a User DSN and connect to the database. However the problem with the System DSN remains.

    Read the article

  • BSOD trying to migrate Windows XP from a physical to a virtual machine

    - by pauldoo
    I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

    Read the article

  • Change XRDP keyboard layout to en-gb Ubuntu 12.04

    - by Earl Sven
    Does anybody know how to change the keyboard layout to en-gb in an XRDP session on Ubuntu 12.04? I am using mstsc.exe to connect to an XRDP server hosting an XVNC session, however I cannot work out how to apply the UK keyboard layout. A bit of googling has yeilded these instructions which allow me to change the keymap, however using the keymap file I downloaded from here I loose the ability to use the arrow keys, home/end etc. Comparing the file with the standard one there are substantially more differences than I would expect considering the similarity between the layouts. I only have RDP access to the box so i don't seem to be able to actually generate a new layout per the instructions above, maybe it's a local console thing? Also I can't change either the RDP client used or the RDP server as they are my only access to the system, I don't have local console access. I do have root priveleges on the OS however. Any thoughts? Edit: I have found http:// xrdp.sourceforge.net/documents/keymap/newkeymap.html (apologies for not typing the link properly but the antispam filter won't let me post more than 2 links) this documentation on the XRDP sourceforge page which describes keymap file format. It indicates the values in the keymap files are unicode 0x64 etc, however the files I have already on my system seem to use a different format 0:0 or 65307:27 etc, does anybody know what the difference is?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >