Search Results

Search found 4105 results on 165 pages for 'intel itanium'.

Page 19/165 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • /usr/share/apport/apport-gpu-error-intel.py Error

    - by gopherballs
    I was on Ubuntu 12.10 and ran the system updates and after the re-install, the system became unstable and kept prompting me with the message "System Issue" and this as the error per Ubuntu "/usr/share/apport/apport-gpu-error-intel.py". After I tried re-starting, the issue is still appearing and the system ultimately freezes (requiring a hard reset). I tried a clean install of 12.10 and the system works fine until the newest updates are applied...it then returns to the same messages. I then tried a clean install of 12.04 LTS and just like 12.10 it works until the latest updates are applied. On 12.04, I tried to use the previous kernel - going from 3.5.0-26 to 3.5.0-23 and the issue is still there. Currently, I'm sitting on 12.04 LTS clean install without doing the updates and the system is working. Does anyone have an idea how to fix this? Thanks.

    Read the article

  • Low graphics mode on ubuntu 12.10 with intel 4000

    - by Amey Jah
    I recently upgraded to 12.10 (fresh install). Now I am facing wierd problem, randomly for when I boot I get a message of low graphics. For now, I switch to console using alt+f1 and then rebboot. On reboot, I select recovery mode, allow system to boot and then again reboot. Now I select normal mode and my graphics loads smoothly. Could you please tell me what could e the issue? I have Dell inspiron 5230 with Intel 4000 onboard graphics. --Amey

    Read the article

  • Reading cpu temperature Intel Celeron (R) with lm-sensors

    - by tim_a
    I know there are already a lot of questions like this, but non of the answers provided there could fix my problem. I try to read out my cpu temperature with lm-sensors on my ubuntu 10.04 LTS installation but I can't get to work. I did try the command sensors-detect several times but still nothing. My computer is an old PC with an Intel Celeron (R) @ 2.60 GHz. The odd thing is that the hdd temp is shown in the applet but when I type in the terminal sensors I get the error: "No sensors found! Make sure you loaded all the kernel drivers you need." I'm not really interested in the hdd temperature but I think it is strange that these sensors do work in the applet and not in the terminal. This is the output that sensors-detect gives: http://pastebin.com/F4hVKaLU Any suggestions?

    Read the article

  • Can aynone tell me what exactly 32bit/64bit and x86 and AMD64 have to do with the different choices on the download site of Ubuntu?

    - by Elysium
    SORRY for the newbie question, but I am still learning. I am wondering if x86 simply refers to the intel CPUs and AMD64 simply refers to the AMD CPUs? While....32bit and 64bit to the processor types? I was trying to download the intel 64bit version of the Ubuntu installer, but it wont give the option of x86 and AMD64....only the 32bit and 64bit can be chosen. Does this mean that someone with an Intel CPU and another person with an AMD CPU will download the same install file? (obviously depending on the bit version of their CPUs this might differ....but that's another thing).

    Read the article

  • Sony VAIO wireless card not connecting intel 4965AGN

    - by marcski55
    I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

    Read the article

  • Triple monitors on hybrid video system GeForce+Intel

    - by v_mil
    I use Lenovo Ideapad Z580A with hybrid video: GeForce+Intel with Ubuntu 12.10 x64 Ukrainian. It has internal display and two outputs: HDMI and VGA. When I connect third display to VGA all displays go black. Pressing alt+backspace and login causes output to two displays: internal and VGA. System Settings - Displays (or monitors - I have Ukrainian interface) shows three displays: two are on, one (DVI) is off. Turning DVI on and pressing apply causes an error: Can not set configuration of controller CRTC 65. BIOS setting is Optimus (two video cards). Driver for GeForce is Nouveau. With best regards. Viktor.

    Read the article

  • Only One GPU Detected in the Nvidia Quadra NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

    - by Sandro Dzneladze
    I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

    Read the article

  • Intel fait durer le suspens sur Sandy Bridge en délivrant les informations au compte-gouttes sur la

    Intel fait durer le suspens sur Sandy Bridge En délivrant les informations au compte-gouttes sur la future micro-architecture de ses processeurs Sandy Bridge est le successeur de Nehalem, la micro-architecture utilisée par Intel pour ses processeurs. Bien qu'on en sache encore assez peu sur cette nouvelle technologie, elle fait d'ores et déjà couler beaucoup d'encre. La stratégie de communication d'Intel, qui délivre les informations au compte-gouttes, n'y est certainement pas pour rien. Lors des derniers Intel Developer Forum (IDF) qui vient de s'achever, David Perlmutter - Executive Vice President Intel Architecture Group - a néanmoins laissé filtrer quelques indices :

    Read the article

  • C++ Intel TBB : sortie de la version 3 de la bibliothèque open source pour le développement parallè

    La bibliothèque open source TBB d'Intel pour programmer en parallèle vient de sortir en version 3 Intel vient d'annoncer aujourd'hui la sortie de la troisième version de sa bibliothèque TBB (thread building blocks). Cette bibliothèque C++, disponible en open source, a pour objectif de permettre de programmer en parallèle, afin d'accéder aux ressources des machines multi-coeurs actuels. Citation: Today, Intel released Intel® Threading Building Blocks (Intel® TBB) 3.0, a high-level parallel programming toolkit that ...

    Read the article

  • Shouldn't WP8 Emulator Work With an Intel Q9650?

    - by Al Bundy
    My comp is as follows: -Windows 8 Pro -Visual Studio 12 Pro -Asus P5Q Pro Turbo -Intel Q9650 (Core 2 Quad 3.0 Ghz) As far as I can tell, this setup should support Windows Phone 8 Emulator, but When I installed Windows Phone 8 SDK, it said that my computer doesn't support hardware virtualization. It says here that it does: http://ark.intel.com/products/35428/Intel-Core2-Quad-Processor-Q9650-(12M-Cache-3_00-GHz-1333-MHz-FSB)

    Read the article

  • Installing Heatsink (XIGMATEK Gaia SD1283) onto Motherboard (ASRock X79 Extreme9 LGA 2011 Intel X79)

    - by Mike Hagstrom
    I recently have purchased: XIGMATEK Gaia SD1283, in the instructions it states two different type's for the installation of the Intel LGA 2011. It lists Type 1 and Type 2. Now I have the Intel Core i7-3930K (http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492) and I have the ASRock X79 Extreme9 LGA 2011 Intel X79 (http://www.newegg.com/Product/Product.aspx?Item=N82E16813157285) What Type do I use for the installation of this heatsink?

    Read the article

  • amd gpu but display on intel integrated graphics

    - by pitseeker
    On my Ubuntu 12.04 I connected my monitor to the onboard intel graphics. I'd like to use my ati radeon 6770 for opencl tasks (e.g. bitcoin mining). So far I couldn't figure out how to get the ati driver working. When calling "aticonfig --initial -f" it always writes a new xorg.conf that ignores the intel graphics. At boot time it works only when I attached the monitor to the ati card. So I manually tampered with the xorg.conf and got this: Section "ServerLayout" Identifier "Default Monitor" Screen 0 "myscreen" 0 0 Screen 1 "deadscreen" RightOf "myscreen" EndSection Section "Module" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Monitor" Identifier "null Monitor" Option "Enable" "false" EndSection Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" Screen 0 EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "myscreen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "deadscreen" Device "aticonfig-Device[0]-0" Monitor "null Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I think this might be the right way since I see that X tries to start both drivers in /var/log/Xorg.0.log. However the fglrx driver seems crash (end of xorg.0.log): Backtrace: [ 6.625] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fb5cd41b846] [ 6.625] 1: /usr/bin/X (0x7fb5cd293000+0x18c6ea) [0x7fb5cd41f6ea] [ 6.625] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fb5cc5b9000+0xfcb0) [0x7fb5cc5c8cb0] [ 6.625] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (xdl_xs111_atiddxGetGPUMapInfo+0x1b1) [0x7fb5c88e16b1] [ 6.625] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (atiddxGetGPUMapInfo+0xd) [0x7fb5c87bcc0d] [ 6.625] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ab29) [0x7fb5ca147b29] [ 6.625] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1cf8c) [0x7fb5ca149f8c] [ 6.625] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ee55) [0x7fb5ca14be55] [ 6.626] 8: /usr/bin/X (InitExtensions+0x99) [0x7fb5cd350069] [ 6.626] 9: /usr/bin/X (0x7fb5cd293000+0x3d605) [0x7fb5cd2d0605] [ 6.626] 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7fb5cb44e76d] [ 6.626] 11: /usr/bin/X (0x7fb5cd293000+0x3daad) [0x7fb5cd2d0aad] [ 6.626] Segmentation fault at address 0x14 [ 6.626] Caught signal 11 (Segmentation fault). Server aborting [ 6.626] I'd be very happy if someone can give me a hint on how to configure my ATI card while using the integrated graphics for display. Update I used most of jjhughes57 config and successfully booted the X server on intel (keyboard layout is changed though, funnily). Unfortunately the 2nd X server (fglrx) doesn't fully start. It shuts itself down right after starting [ 6.265] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 6.296] (II) UnloadModule: "mouse" [ 6.296] (II) Unloading mouse [ 6.296] (II) UnloadModule: "kbd" [ 6.296] (II) Unloading kbd [ 6.298] (II) fglrx(0): Shutdown CMMQS [ 6.298] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 6.298] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fbef8209000 [ 6.337] (II) fglrx(0): Interrupt handler Shutdown. [ 6.470] ddxSigGiveUp: Closing log [ 6.470] Server terminated successfully (0). Closing log file. Thanks for any hints what is wrong here.

    Read the article

  • Motherboard: Intel S5520HCR s1366 SSI EEB

    - by Crazy_Bash
    I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

    Read the article

  • Latest XP Drivers for Intel Integrated Graphics

    - by John
    On the Intel site I'm struggling to find what the latest driver version is for certain chipsets. From a system info tool I have several PCs (laptops) with the following reported graphics: Mobile Intel(R) 4 Series Express Chipset Family Intel(R) Q35 Express Chipset Family Intel(R) Q45/Q43 Express Chipset All use the same driver igxprd32.dll at version 6.14.0010.4xxx (last 3 digits vary). All PCs are XP 32 bit. I am not certain but I think these are all using the same basic chipset. More than likely the drivers were never updated so I wondered what version might be relevant. Any help on tracking down the latest driver version (I just need the number, so I can see how out of date they are) and figuring out which chips these cards are would be great.

    Read the article

  • Which virtualization solutions are available for non-x86 platforms?

    - by asmaier
    Are their any virtualization solutions like Xen, KVM and VMWare ESX available for non-x86 platform? Especially I'm interested if there are solutions available or if Xen, KVM can be made to run on the platforms POWER5/6/7 PowerPC Itanium 64 NEC SX-8/9 Cray X2 BlueGene What are your experiences? Is it possible to virtualize GPUs like Nvidias Tesla/Fermi?

    Read the article

  • kubuntu 12.10 will not boot on mac 2.93Ghz intel core 2 duo

    - by Jake Sweet
    I feel like I've tried it all and nothing is changing. I've tried booting from a liveUSB, a liveDVD, and I've checked the mod5 everything matches up. I've even tried different distro's same result on all of them. Just for reference: linuxmint 13kde and Fedora 17. I've also tried changing my liveUSB building software just in case. I've tried unetbootin and Linux USB builder. Both have same results, my opinion is that it is a hardware issue since I'm having near the same result with all of these variables. So now what is actually happening? I can boot up to a screen. I say A screen because some of the ways that dvd's and usb's boot differs. Now on liveusb I'm reaching a black screen with white text. Says booting: done, then below says loading ramdrive: done, then below that it says preparing to boot kernel this may take a while and buckle in or something to that effect. Then nothing. That's it computer freezes. I've waited up to 8 hrs and still nothing. Ok for the liveDVD Everything goes according to instructions per pdf files on every distro, until linux starts. I can only run in compatibility mode. When any other option is tried the computer seems to freeze/stall/be a pain in my butt... Ok well that seems to wrap it up. Also if I'm not explaining something well, I'm sorry I can try to clear anything up. I'm not the best at descriptions. I'm leaving with a tech specs of my mac: 2.93GHz Intel Core 2 Duo, 4 GB ram, NVIDIA GeForce GT 120 graphics, bought in late 09" it's the 24" model, let me know if anymore information will help. Also thanks in advance

    Read the article

  • Intel 82576 Network card

    - by No1_Melman
    I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

    Read the article

  • intel atom getting too hot

    - by user59565
    I own an Asus 1215N which is getting very hot Intel Atom 525D dual core ION 2 (geforce 220 + GMA 3150) 4 GB RAM Ubuntu 12.04 it hits 86 C at idle. Some times (at load or turned on 1 hour) it shuts down due to heat, in Windows 7 it runs idle at 49 C. I tried an acpi call to shut down the nVidia chip which is cooled together with the Atom chip. That didn't solve the problem. To check up to see if it really turned off I checked how much power the laptop consumed, it only went from using 1400 mW to 860 mW, no changes in heat. I also tried reapply the standard heat adhesive, the old heat adhesive made it run at 97 (it couldn't even put up a useful install of Ubuntu). This really annoys me, as Ubuntu is the OS of choice to me. Should I try compile the kernel? Is it true that compile for a P4 is the better choice to the atom, when compiling the kernel for this processor architecture? Now I tried compiling the kernel for atom. Now temperature is 83 C (think the drop has more to do with ambient temp than the customized kernel) help appreciated

    Read the article

  • Dedicated Hosting offering Intel Core 2 Quad @ 6GHz. Is this real?

    - by Daniel Magliola
    Hi, sorry if this is a very dumb question, but... I just got an offer from a dedicated hosting company, offering me a box with "2 Core 2 Quad processors @ 6GHz" I didn't know we could get 6GHz, and some googling turned out a bunch of people getting that, after overclocking like crazy, which seems to confirm my suspicion. Are there hostings offering 6GHz CPUs, or are these people outright lying to me? Thank you!

    Read the article

  • Lenovo ThinkCentre DisplayPort not working

    - by user170736
    I installed Xubuntu 13.04, Zorin 7, and finally Ubuntu 13.04 on a Lenovo M58. The BIOS works fine on my DisplayPort monitor but Ubuntu will only work on the SVGA. The graphics are on-board: Intel Q45/Q43 x86/MMX/SSE2 I installed and ran the new Intel Driver Manager. It seemed to complete all tasks without any errors, but the DisplayPort still only works for the BIOS. Any help would be greatly appreciated

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >