Search Results

Search found 1862 results on 75 pages for 'matt h'.

Page 19/75 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• start-onlinecoexistencesync o365 Powershell

  - by Matt Bear

  I've been on the phone with microsoft for over an hour trying to get a straight answer from them, and if I was set up to test this myself right now I could find out. I'm deploying o365 SSO in stages by OU, dir sync is performed every 3 hours. I need to do a sync right away. Will 'start-onlinecoexistencesync' only sync those users that have already been federated, or will it force a federation of all users?

  Read the article

• Enter key on Mac OS X renames files instead of launching

  - by Matt

  On my Mac when I hit the "enter" key on a file on my desktop or in the finder, it enters the "rename file" mode. 1) How do you actually "launch" or "open" (i.e. double click) the file with only the keyboard? In Windows, the Enter key does this. 2) Is there a way to map the Enter key to do this in Mac instead of rename? Honestly, it makes little sense to me. I mean, how often do you rename something? Once, maybe. How often do you open something? Lots and lots of times.

  Read the article

• Does Windows XP automatically reassemble UDP fragments?

  - by Matt Davis

  I've got a Windows application that receives and processes XML messages transmitted via UDP. The application collects the data using Windows "raw" sockets, so the entire layer 3 packet is visible. We've recently run across a problem that has me stumped. If the XML messages (i.e., UDP packets) are large (i.e., 1500 bytes), they get fragmented as expected. Ordinarily, this will cause the XML processor to fail because it attempts to process each UDP packet as if it is a complete XML message. This is a known short-coming in the system at this stage of its development. On Windows 7, this is exactly what happens. The fragments are received and logged, but no processing occurs. On Windows XP, however, the same fragments are seen, and the XML processor seems to handle everything just fine. Does Windows XP automatically reassemble UDP fragments? I guess I could expect this for a normal UDP socket, but it's not expected behavior for a "raw" socket, IMO. Further, if this is the case on Windows XP, why isn't the behavior the same on Windows 7? Is there a way to enable this?

  Read the article

• How do I stop VMware Workstation 6.5 from giving up input focus for no reason on Ubuntu 10.4?

  - by Matt

  After patching some kernel modules, I got VMware Workstation 6.5.4 running on my Ubuntu 10.4 x86_64 machine. However, now my Windows XP SP3 guest instance cannot keep mouse input captured for any length of time. I can sometimes activate a control in the guest if a double click very quickly, but it's not reliable (and extremely annoying). Everything appears to be fine in Unity; the problem just appears when I'm running the instance in the VMware window.

  Read the article

• How do I make dnsmasq serve IP addresses via IPoIB?

  - by Matt

  I have a cluster farm that I'm setting up. The nodes (computers in the farm) are connected via ethernet & IP over Infiniband. I'm needing to netboot the nodes and thought dnsmasq would fit well as it provides all the features including support for DHCP over IB and it works great for our ethernet setup. However, I can't seem to get it to provide IP addresses to the infiniband adaptors on the nodes. Each node is running an Ubuntu desktop 12.04 LTS. The dnsmasq server is running on ubuntu server 12.04LTS and has the following test config: dhcp-authoritative domain-needed bogus-priv expand-hosts no-hosts domain=local dhcp-range=eth0,10.0.0.10,10.0.0.255,12h dhcp-option=eth0,3,10.0.0.1 dhcp-range=ib0,10.1.1.10,10.1.1.255,12h dhcp-option=ib0,3,10.1.1.1 log-queries log-dhcp IPoIB works between nodes when configured statically but not with dhcp. On the nodes the file /etc/network/interfaces contains auto lo iface lo inet loopback auto ib0 iface ib0 inet dhcp #iface ib0 inet static #address 10.1.1.5 #netmask 255.0.0.0 up echo connected >`find /sys -name mode | grep ib0` Is there something I need to do on the client or server end to make this work?

  Read the article

• Shell Script Launching Child Processes

  - by Matt James

  Disclaimer: I'm totally new to shell scripting, but have quite a bit of experience in other languages like PHP and Obj-C. I'm writing my first daemon script. Here are the goals: I want it to run in the background I want it to be triggered by an init.d script that includes start/stop/restart commands I want each process in a loop to trigger its own subprocess. When the parent process kicked off by the init.d script is killed, I want the subprocesses to die as well. Essentially, I'm looking for the same kind of behavior that appears to be very common among software like apache, spamd, dovecot, etc. But, based on my research, I haven't found a single, simple answer as to how this kind of thing is achieved. Any help is greatly appreciated.

  Read the article

• How do I upgrade the BIOS to boot the motherboard when the CPU is not suported?

  - by Matt

  So I have a Tyan S8225 motherboard with a Valencia (Opteron 4200) CPU. Two of us have tried everything. We have even swapped the whole motherboard, Power supply, memory, even a different CPU (still Valencia). We even tried it without any memory installed and with only a single CPU. There are no beep codes as I suspect even those are controlled by the BIOS boot process. We put the whole thing on the bench with just the power supply, VGA, keyboard and network (for IPMI) connected. The IPMI is not even showing the BIOS starting, but the IPMI is working. After some hunting around, I discovered the claim on the website is that the Valencia CPU's are not supported on older BIOS revisions. For a start, I don't know what the bios revision is and if it's older but it's the only thing left. Could the BIOS be causing a board not to boot at all? If that's the case, then is there any other way to update the BIOS without buying an old CPU only to be put back in a box just to update the BIOS? Yes, we even tried updating the BIOS through IPMI but you can't do that either.

  Read the article

• Windows SteadyState - system's security log is full

  - by Matt

  Quick version: New computer, attached to Windows domain, with SteadyState w/ Disk Protection turned on, cannot log on as domain user because Windows states 'system security log is full' Troubleshooting performed: disabled all 'restrictions' listed in SteadyState, cleared system security log, changed security log settings to overwrite entries when it becomes full, restarted computer to commit changes, verified changes were commited - still cannot log on as domain user, changed Documents and Settings folder to another partition, still cannot log on as domain user Let me know if you need a more detailed description of any steps performed. I appreciate any help you can give me.

  Read the article

• Does anyone know of a windows program that will make a HDD spin so I can physically identify it by s

  - by Matt

  Does anyone know of a windows program that will make a HDD spin so I can physically identify it by sound in a machine?

  Read the article

• User cannot Add or Remove people from a distribution list using outlook.

  - by Matt

  Recently we moved across a user and a distribution list from Exchange 2003 to 2010. The user used to be able to add and remove from a distribution list within Outlook. I have added them to the Managed by list in Exchange in the distribution list, but to no avail. They are getting an error message saying You do not have the sufficient permissions to perform this operation on this object. I cannot seem to find the setting to allow the user permissions.

  Read the article

• How to wipe an IPod with DBAN

  - by Matt Powers

  I'm looking to use a utility such as Darik's Boot And Nuke (www.dban.org) to wipe my iPod (classic fifth generation) so I can sell it on Ebay (without having to worry about my data being recovered.) Any suggestions on how to do this?

  Read the article

• Search inside of text files

  - by Matt

  So here is the situation. I currently run a mail server for my small non-profit company. My mail server (Merak Mail Server) keeps logs in .log files and mail as .tmp files. Essentially these are just text files that are kept on the server. Problem is that when I put text into the "Containing text" field on Windows Explorer, it always misses the files and tells me no results returned. Then when I search the files one by one (painful at best), I find the files I need. Do I not understand the search feature well enough, or maybe I have it indexing wrong. I really don't care what I need to use to search the files, even a third-party app is fine with me, I just want to type an email address into a box and search all of my log files or email files and find out which one I am looking for. It can be Windows Search or something else, as long as I can find a way to get the job done I will be happy. Pay solutions are fine as well. Thanks everyone in advance.

  Read the article

• How can I force the display of image "handles" in Microsoft Word 2010?

  - by Matt

  In order to select images in Microsoft Word documents you need to get the cursor just right so that it turns into the "+" arrow icon, at which point you can click to select the image. When your cursor is not in exactly the right spot you see something like this (note that the letter "m" shown in the picture is an image, not a font): When your cursor is in an appropriate spot you see something like this: For simple images with relatively straight and simple borders, it's easy; you hover over the image and you get the "+" arrow. But for smaller, more intricate images with many sides, thin borders or perhaps transparency it's often madness as you move your cursor all over the image struggling to find the teenie little spot that Word deems is selectable. Is there some means of enabling the display of "handles" (maybe wrong term) around images before you select them, so you can see the selectable spots without hunting and pecking for them?

  Read the article

• Toshiba eStudio 281c turn off snmp in driver.

  - by Matt

  I have a customer with an eStudio 281c colour copier/printer and I'm having an issue with terminal services. Basically, the driver has the ability to query the printer for its configuration over snmp. I've set it to manual rather than auto so it's effectively switched off. Trouble is, when logging into terminal services it's still trying to communicate with the printer. This is an issue because when it fails it then defaults to being a different printer model with a different tray configuration. Users can still print but the settings are wrong. Any ideas?

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• Is there a way to uninstall all of VS2008 easily or do I really have to hunt each component down 1-b

  - by Matt

  Is there a way to uninstall all of VS2008 easily or do I really have to hunt each component down 1-by-1 in Installed Programs? This is ridiculous....

  Read the article

• Box.com file sharing - How are you managing concurrent document access and file locks? [closed]

  - by Matt

  My company is evaluating Box.com as a file server replacement. It's file locking behavior for concurrent access to files seems incomplete. Specifically, files are not locked* (either exclusive or read-only) when they are being edited by Office or similar programs. This inevitably results in multiple versions of documents as concurrent access results in change conflicts. *The exception is when the file is edited using Zoho Docs - perhaps other web-based office suites as well. Box provides multiple options for editing documents, including Google Docs, a local copy of Office or similar, Zoho Docs and others. If you are using Box how have you managed or worked around this behavior?

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Access to server's application event log without being a PowerUser

  - by Macho Matt

  Is there a way to grant users access to the Application Event Log on a server without making them a PowerUser on the server? There are other tools that we can use (syslog or elmah), but it would be easier if we can just grant access to the log. I just want to be able to open up eventvwr and "Connect to Another Computer".

  Read the article

• Changing Mac OS X 10.6 Routing after VPN'd In

  - by Matt Rogish

  I have a coffee shop around the corner that I use to do some work when I want to get away from home. They offer free wi-fi and I then use my Mac 10.6 VPN to log into my work network. I have "Send all traffic over VPN connection" checked. Before, their network was 10.0.0.x. I think they got a new router because it's now 192.168.2.x However, this interferes with one of the subnets at work so now I can't visit 192.168.2.x at work. So: 1) Office network: VPN gives IPs as 192.168.1.x. Another network is 192.168.2.x 2) Coffee network: Gives IPs as 192.168.2.x I think if I set a route to send all 2.x traffic over the tunnel, it would blow up my routing to their system, right? What should I do? I know the individual IPs of the servers I want... Maybe I could add each one, or can I add all of them minus the default gateway of their router? How do I set that up "temporarily" in my Mac? Thanks!!

  Read the article

• Why is this APC installation failing so badly?

  - by Matt

  I have multiple instances of APC running on my server with similar configurations (albeit with different cache sizes. However, one of the instances is performing extremely poorly, and I have no idea why (100% cache fragmentation, high miss rate). The runtime settings I'm using are as follows (pretty much out of the box): apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.shm_segments 1 apc.shm_size 10M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 APC is version 3.1.6, PHP is 5.3.3-1ubuntu9.5. I've tried restarting Apache multiple times, so this isn't a freak instance. The instance with problems is simply running Wordpress with a few plugins installed. All other instances (~4) on the server are running perfectly fine with almost 100% hit rates and 0% fragmentation; for example this instance is holding a website built using the Symfony framework. Any help would be much appreciated; I haven't had much experience with APC and was hoping for it to be an out-of-the-box speed boost ;).

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• MySQL doesn't talk to PHP anymore (EasyPHP)

  - by Matt Ellen

  I've just upgraded from Windows XP to Windows 7 (64 bit) I was using EasyPHP 5.3.1 to develop my website, but since I've upgraded I can't get PHP to talk to MySQL. Even the PHPMyAdmin page doesn't load. I've tried installing the latest 64bit version of MySQL in place of the supplied version of MySQL, but that hasn't helped. The queries just don't seem to reach MySQL. I have verified that the DB for my database works by running mysql on the command line. PHPMyAdmin doesn't display an error, just a blank page. The error coming up from my website is: Warning: PDO::__construct() [pdo.--construct]: [2002] A connection attempt failed because the connected party did not (trying to connect via tcp://localhost:3306) in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 14 Fatal error: Maximum execution time of 60 seconds exceeded in E:\services\EasyPHP-5.3.1\www\IdeaWeb\classes\Security.inc on line 0 Does anyone know how to solve this? (i.e. get MySQL talking to PHP.)

  Read the article

• IIS Manager - Connect to Another Server (Win7 to Win2008 server)

  - by Matt

  I am running Windows 7 Ultimate. If I open up IIS Manager, I see a list of "connections" on the left hand side. In previous versions, I would be able to select an option to "connect to another server" or "connect to another machine", but there is no such option visible anywhere here. The only thing in the list is my local machine. Even in the address bar, if I manually type in the server location (\servername, even tried just servername), nothing happens (it just reverts back to my current local computer) The documentation at http://technet.microsoft.com/en-us/library/cc732466%28WS.10%29.aspx seems to imply the very same steps... but there is just no button or menu option anywhere to do this. Am I missing something? I'm not even seeing a grayed out menu option. EDIT: Under the "File" menu, I see 2 options: Save Connections (grayed out) Exit Under the "Connections" pane, I see 1 button, grayed out. When I hover the mouse, it simply says "Up", appears to be usable if I browse into an element in my local computers IIS settings If I right click inside the pane itself, I see Refresh Add website (to the current host) Start Stop Rename Switch to Content View UPDATE: I downloaded and installed the Remote Server Administration tools from http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en, and I enabled everything listed under "Remote Server Administration Tools" under "Turn Windows Features On or Off". Still nothing.

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >