Search Results

Search found 550 results on 22 pages for 'morpheus lucid'.

Page 19/22 | < Previous Page | 15 16 17 18 19 20 21 22  | Next Page >

• Ubuntu in Virtualbox - web server very slow when using local IP address

  - by Lenny Marnham

  I'm using Ubuntu (Lucid Lynx) to learn Ruby On Rails. I'm running Ubuntu in VirtualBox (the host is Windows 7 Ultimate), using bridged networking. When I run my Rails app and point the browser at it using localhost:3000, the app responds immediately and my page is rendered in a second or two. However, if I use 10.0.0.5:3000 (where 10.0.0.5 is my IP address reported using ifconfig), the response from my rails app is incredibly slow - maybe 30 seconds or more for the server to respond and render the page. This happens in both Firefox and Chrome. Also, when I hit the Rails app from the host (to test it in IE), I get the same slooooooow response. Any ideas what might be going on? I've tried it with two different routers, and on two different networks (work and home) with the same result. Cheers all.

  Read the article

• Can't decide on a new distro

  - by Alex W

  I've had Ubuntu (9.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook. Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working). Thanks!

  Read the article

• Fully Qualified Domain name on Ubuntu Server

  - by Fazal

  I've setup a LAMP server on Ubuntu 10.04 (lucid) and have also installed Virtualmin. This is my first attempt at setting up a server of any sort. I set up one virtual host using Virtualmin and so far so good. Some odd things are happening though, such as when I type in my primary domain into a browser, I see the contents of the virtual server instead of what should be in the default directory. I'm going to use 123.345.789 and example.co.uk instead of my actual ip and domain name's if thats ok. I checked my hostname by using hostname -f and got production1 as my response The contents of my /etc/hosts file is (ip's and domain changed to something generic for this post): 127.0.0.1 localhost localhost.localdomain 123.456.789 production1.example.co.uk 123.456.789 production1 shouldn't my FQD be production1.example.co.uk? How can I go about changing this?, a simple step by step instruction would be great! thanks in advance.

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• Hot swap in Ubuntu Server not working

  - by druciferre

  I am running Ubuntu Server 10.04 (lucid lynx), and I just purchased a hot-swap compatible hdd bay and installed it. When I insert a hot-swappable SATA drive, the drive does not show up after running ls /dev/sd?. If I reboot the server, then after it comes back up the drive appears. I have checked /var/log/messages and nothing shows up when I insert the drive, only after rebooting. I have tried the following: $ sudo echo "0 0 0" > /sys/class/scsi_host/host4/scan $ sudo partprobe` $ sudo udevadm trigger Every answer I've found searching Google was one of the things I listed in "I have tried..." and I don't really know what to do at this point. Does anyone know why this occurring?

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• Restore wubi install after changing master drive

  - by Johnny

  Recently I got a 160G drive to install other Unix distributions and learn to use them for the sake of my current job. However I've got only 2 drive connectors free (on the primary channel). Therefore I've decided to remove an 80G hard drive which has the MBR and the main Windows bootloader. My problem in particular is that I've got another 250G drive which has a Wubi installation of Ubuntu 10.04 (Lucid Lynx), which I want to preserve on the bootloader that's going to be running for all the other OSes (potentially Grub). How would I do that? Since Wubi is actually sort of windows reliant, as far as I've learned so far.

  Read the article

• How can I activate a Panel-icon via a script (or get its screen co-ordinates; to click it)?

  - by fred.bear

  This question is in the context of Lucid 10.04 desktop (ie. no Unity). I do most screen navigation via the keyboard (not the mouse), so I'm looking for a script solution to re-activating an app which has been "minimized" to the Panel's Notification Area. I'll use Skype as an example. wmctrl allows me enough access to normally-minimized windows, but when Skype is "minimized" to the Notification Area, it simply goes "off the radar" as far as wmctrl is concerned. Bearing in mind that icon positions in the Notification Area can vary, is there some way to determine the screen co-ordinates of Skype's Panel icon, so I can "click" it using xdotool (or a similar utility)? ...or maybe there is a more direct way to activate the "dormant" Skype? ... (and I don't mean the mouse ;) Here is the script, so far. Hopefully it will make clear what I'm trying to do: #!/bin/bash procname="skype-wrapper" windmask="Skype™" if [[ $(pgrep -x -n -c "$procname") == 1 ]] ; then wintitle="$(wmctrl -l |grep "$windmask" |head -n 1 |sed -n "s/^.\+${HOSTNAME} \(.*\)/\1/p")" if [ "$wintitle" = "" ] ; then echo "Click on Skype's Panel-icon to show the main window" ############################################################### # How can I find the screen co-ordinates of Skype's Panel Icon ############################################################### else # Skype is running, and has (at least) one visible window which matches $windmask. Activate it. wmctrl -a "$wintitle" fi else # The process is not currently running. Start it. ("$procname" &) fi

  Read the article

• Upgrade from 10.04 to 10.10 on netbook: now or later?

  - by jbatista

  I began with installing 9.04 in a netbook (Asus EeePC 1000H), upgraded to 9.10 and have now Lucid Lynx 10.04 (LTS). Most things tested run pretty good, with the most notable exception being wireless network due to the hardware which I first tested after the last major upgrade and a few times before giving up (failed to maintain connection to WPA2 networks). Other nuisances are not as important (e.g. some hotkeys work, a couple of them don't), but given that most everything works I'm concerned with doing an upgrade to find most things have been broken and I have to go back and dig up on how to get it to work... Once in a while, I look up for some posts elsewhere to read up on problems and to find out if they're tame enough to justify an upgrade to 10.10. I'm not in a rush, but I'm not interested in being too left behind some time from now that an upgrade becomes too costly or downright impossible (many things formatted too differently). I'm not even sure if it's possible to "easily" upgrade from LTS to LTS release... Therefore I ask if it's (in principle) possible to skip releases and only do a major upgrade much later on. For example, is it possible (or advisable) to do an upgrade only when the next LTS comes out (a couple of years from now)? Or is it preferable not to skip releases at all?

  Read the article

• Not able to install LTT tool in 10.04

  - by Ashoka

  I have tried the below commands to install LTT on VMware running Ubuntu 10.04, but got the following error. Please help. From link : https://launchpad.net/~lttng/+archive/ppa $ sudo apt-add-repository ppa:lttng/ppa $ sudo apt-get update $ sudo apt-get install lttng-tools lttng-modules-dkms babeltrace user@usr:~$ sudo apt-add-repository ppa:lttng/ppa Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv C541B13BD43FA44A287E4161F4A7DFFC33739778 gpg: requesting key 33739778 from hkp server keyserver.ubuntu.com gpg: unable to execute program `/usr/local/libexec/gnupg/gpgkeys_curl': No such file or directory gpg: no handler for keyserver scheme `hkp' gpg: keyserver receive failed: keyserver error user@usr:~$ user@usr:~$ sudo apt-get update ..... $ user@usr:~$ sudo apt-get install lttng-tools lttng-modules-dkms babeltrace Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package lttng-tools user@usr:~$ My systemm details: user@usr:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.4 LTS" user@usr:~$ user@usr:~$ user@usr:~$ uname -a Linux usr 2.6.32-42-generic #95-Ubuntu SMP Wed Jul 25 15:57:54 UTC 2012 i686 GNU/Linux user@usr:~$ Regards, Ashoka

  Read the article

• How to install stuff on Ubuntu

  - by Industrial

  Hi everyone, I have just launched my first EC2 instance and choosed a Ubuntu image to start from, since it's quite well documented. However, I am trying to install the Redis package: http://packages.ubuntu.com/lucid/redis-server Maybe I am not googling properly or just stupid since the weekend is approaching, but I'll keep getting errors: root@ip-10-229-123-199:~# sudo apt-get install redis-server Reading package lists... Done Building dependency tree... Done E: Couldn't find package redis-server I'll assume that I need to add a repository or something to Ubuntu to help it find the package I want, but how do I do it? I can only find graphical guides which doesnt help me too much since I am using SSH. Thanks alot!

  Read the article

• Ubuntu upstart hangs on interactive start & stop

  - by danorton

  How do I get Ubuntu upstart to not hang on interactive start & stop? I have created many upstart scripts that work fine during init, but often hang when I enter them at the console. If I CTRL+C out, all that happens is that the job changes state. The script is never run. I’m running Ubuntu Lucid on a Xen virtual server with a Linux 2.6.39 kernel. Below is merely a representative example of many scripts that behave this way: description "apache2" start on local-filesystems \ and (net-device-up IFACE=lo) \ and (runlevel [2345]) stop on runlevel [016] respawn respawn limit 10 5 expect daemon script . /etc/apache2/envvars /usr/sbin/apache2ctl start end script

  Read the article

• Bash script: bad interpreter

  - by Quandary

  Question: I get this error message: export: bad interpreter: No such file or directory when I execute this bash script #!/bin/bash MONO_PREFIX=/opt/mono-2.6 GNOME_PREFIX=/opt/gnome-2.6 export DYLD_LIBRARY_PATH=$MONO_PREFIX/lib:$DYLD_LIBRARY_PATH export LD_LIBRARY_PATH=$MONO_PREFIX/lib:$LD_LIBRARY_PATH export C_INCLUDE_PATH=$MONO_PREFIX/include:$GNOME_PREFIX/include export ACLOCAL_PATH=$MONO_PREFIX/share/aclocal export PKG_CONFIG_PATH=$MONO_PREFIX/lib/pkgconfig:$GNOME_PREFIX/lib/pkgconfig PATH=$MONO_PREFIX/bin:$PATH PS1="[mono-2.6] \w @ " But the bash path seems to be correct: asshat@IS1300:~/sources/mono-2.6# which bash /bin/bash asshat@IS1300:~# cd sources/ asshat@IS1300:~/sources# cd mono-2.6/ asshat@IS1300:~/sources/mono-2.6# ./mono-2.6-environment export: bad interpreter: No such file or directory asshat@IS1300:~/sources/mono-2.6# ls download mono-2.4 mono-2.4-environment mono-2.6 mono-2.6-environment asshat@IS1300:~/sources/mono-2.6# cp mono-2.6-environment mono-2.6-environment.sh asshat@IS1300:~/sources/mono-2.6# ./mono-2.6-environment.sh export: bad interpreter: No such file or directory asshat@IS1300:~/sources/mono-2.6# ls download mono-2.4-environment mono-2.6-environment mono-2.4 mono-2.6 mono-2.6-environment.sh asshat@IS1300:~/sources/mono-2.6# bash mono-2.6-environment asshat@IS1300:~/sources/mono-2.6# What am I doing wrong? Or is this a Lucid bug? [i did chmod + x]

  Read the article

• How to get Webkit Browser DBus Bridge working?

  - by SS

  I've been struggling to get the Browser Dbus Binding working for Webkit/GTK (http://gitorious.org/webkitgtk/stable) port. I have been able to successfully compile the Webkit/GTK port as well as the DBus binding library on my Ubuntu Lucid Beta. I also installed the DBus binding library at the standard location /usr/local/lib. But now when I launch the Webkit/GTK browser and try to run one of the sample html files that are provided with DBus binding source, I get "Browser D-Bus Bridge not available, cannot run tests." Basically, JavaScript cannot find window.dbus object. Can anyone tell me what needs to be done here?

  Read the article

• Tutorial on Using OpenSSL with pthreads

  - by Sadeq Dousti

  OpenSSL documents state that it can safely be used in multi-threaded applications provided that at least two callback functions are set, locking_function and threadid_func.... I've written programs which use OpenSSL API. Moreover, I know how to use pthreads. However, the OpenSSL documents are written in the form of a manual, and I can't see a step-by-step guide on what I have to do when using OpenSSL in a multi-threaded app. Is there a tutorial on using OpenSSL with pthreads? (I searched the web, but no satisfactory result appeared.) PS: I'm working in Debian Lenny & Ubuntu Lucid/Maverick. PS2: OpenSSL includes a sample, but it's far too complicated to start with.

  Read the article

• emacs23 pops up debugger way too frequently

  - by werner r.

  Since I've upgraded to Ubuntu lucid and emacs23, Emacs pops up the debugger in situations, where emacs22 does not. For example, when hitting C-c C-c in org-mode, emacs22 simply states can do nothing useful at this location, whereas in emacs23 the debugger shows up. Debugger entered--Lisp error: (error "C-c C-c can do nothing useful at this location") signal(error ("C-c C-c can do nothing useful at this location")) error("C-c C-c can do nothing useful at this location") org-ctrl-c-ctrl-c(nil) call-interactively(org-ctrl-c-ctrl-c nil nil) That only illustrates the pattern -- the behavior is not limited to org-mode. Occurring every 3 minutes, it really annoys me. How can I prevent it? I've already tried to stop this using debug-on-error and stack-trace-on-error: it didn't work.

  Read the article

• Loading zsh as the default shell in gnu screen

  - by joel

  Hello, Im using KUbuntu 10.04 (Lucid Lynx). I have installed zsh and screen. I have set zsh as the default shell, by setting Command to zsh in Settings-Edit Current Profile of the terminal. But,when i launch screen,the bash shell is loaded. If i run the command zsh, then zsh starts but the following message is displayed: "/home/joel/.zshrc:36: Can't add module parameter `mapfile': parameter already exists" Also,zsh is invoked for only the current screen instance and i have to invoke it manually again for other instances. So,is there any way to make screen load zsh by default and invoke it automatically for every instance ? Thank You

  Read the article

• How do I route watir through a proxy pragmatically?

  - by feydr

  I'm trying to route watir through a proxy pragmatically -- this means within the script I'd like to change my proxy dynamically before launching the browser. Here's what I've tried so far (and so far am failing): I'm running chrome and lucid lynx ubuntu. I chose TREX cause I thought watir might be making use of PROXY or something. I rewrote /usr/bin/google-chrome as: #!/bin/bash /opt/google/chrome/chrome --proxy-server="$TREX" $@ The reason I'm passing in the environment variable to proxy-server rather than http_proxy is because I never could get http_proxy to work as is anyways then I did a simple: require 'rubygems' require 'watir-webdriver' ENV['TREX'] = "XX.XX.XX.XX:YY" browser = Watir::Browser.new(:chrome) browser.goto("http://mysite.com") Anyways, what is happening here is that it is forwarding me to the login page of the proxy rather than just forwarding the request. What am I missing here? I feel like I'm pretty close.

  Read the article

• selecting ppp of multiple interfaces

  - by Neeraj

  Hi everyone, I am currently having a hard time on getting the mobile broadband connection running on ubuntu 10.04(lucid lynx). I am using a USB modem and used wvdial to connect to the web It went like: Sending ATZ ... OK sending some more flags OK modem initialized connecting Local IP x.x.x.x Remote IP y.y.y.y Primary DNS z.z.z.z Secondary DNS a.a.a.a (Some more output) I tested this with invalid username to make sure it is really connected and i think it was connected as connection failed with invalid usernames. Now when I do a remote ping say 8.8.8.8 (Google DNS servers), the ping says unreachable I think this might be because the system may be using the ethernet to send packets which was indeed disconnected. So can anyone help me out with this. How can I select ppp as the interface to send packets or is there some other problem. A command line solution will be appreciated as my network manager applet doesnt works correctly. Any help is much much appreciated. -- thx

  Read the article

• An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

  - by williepabon

  I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

  Read the article

• Changing the default installation path to a newly installed hard disk

  - by mgj

  Hi, I am currently working on a dual-booted PC. I am using Windows XP and Ubuntu 10.04 Lucid Lynx released in April 2010. The allocated partition to Ubuntu that I am making use of has almost exhausted. Current memory allocations on the PC wrt Ubuntu OS looks like this: bodhgaya@pc146724-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 8.6G 8.0G 113M 99% / none 998M 268K 998M 1% /dev none 1002M 580K 1002M 1% /dev/shm none 1002M 100K 1002M 1% /var/run none 1002M 0 1002M 0% /var/lock none 1002M 0 1002M 0% /lib/init/rw /dev/sda1 25G 16G 9.8G 62% /media/C /dev/sdb1 37G 214M 35G 1% /media/ubuntulinuxstore bodhgaya@pc146724-desktop:~$ cd /tmp I am trying to mount a 40GB(/dev/sdb1 - given below) new hard disk along with my existing Ubuntu system to overcome with hard disk space related issues. I referred to the following tutorial to mount a new hard disk onto the system:- http://www.smorgasbord.net/how-to-in...untu-linux%20/ I was able to successfully mount this hard disk for Ubuntu 0S. I have this new hard disk setup in /media/ubuntulinuxstore directory. The current partition in my system looks like this: bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ sudo fdisk -l [sudo] password for bodhgaya: Disk /dev/sda: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x446eceb5 Device Boot Start End Blocks Id System /dev/sda1 * 2 3264 26210047+ 7 HPFS/NTFS /dev/sda2 3265 4385 9004432+ 83 Linux /dev/sda3 4386 4863 3839535 82 Linux swap / Solaris Disk /dev/sdb: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfa8afa8a Device Boot Start End Blocks Id System /dev/sdb1 1 4862 39053983+ 7 HPFS/NTFS bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ Now, I have a concern wrt the "location" where the new softwares will be installed. Generally softwares are installed via the terminal and by default a fixed path is used to where the post installation set up files can be found (I am talking in context of the drive). This is like the typical case of Windows, where softwares by default are installed in the C: drive. These days people customize their installations to a drive which they find apt to serve their purpose (generally based on availability of hard disk space). I am trying to figure out how to customize the same for Ubuntu. As we all know the most softwares are installed via commands given from the Terminal. My road block is how do I redirect the default path set on the terminal where files get installed to this new hard disk. This if done will help me overcome space constraints I am currently facing wrt the partition on which my Ubuntu is initially installed. I would also by this, save time on not formatting my system and reinstalling Ubuntu and other softwares all over again. Please help me with this, your suggestions are much appreciated.

  Read the article

• clear explanation sought: throw() and stack unwinding

  - by Jerry Gagelman

  I'm not a programmer but have learned a lot watching others. I am writing wrapper classes to simplify things with a really technical API that I'm working with. Its routines return error codes, and I have a function that converts those to strings: static const char* LibErrString(int errno); For uniformity I decided to have member of my classes throw an exception when an error is encountered. I created a class: struct MyExcept : public std::exception { const char* errstr_; const char* what() const throw() {return errstr_;} MyExcept(const char* errstr) : errstr_(errstr) {} }; Then, in one of my classes: class Foo { public: void bar() { int err = SomeAPIRoutine(...); if (err != SUCCESS) throw MyExcept(LibErrString(err)); // otherwise... } }; The whole thing works perfectly: if SomeAPIRoutine returns an error, a try-catch block around the call to Foo::bar catches a standard exception with the correct error string in what(). Then I wanted the member to give more information: void Foo::bar() { char adieu[128]; int err = SomeAPIRoutine(...); if (err != SUCCESS) { std::strcpy(adieu,"In Foo::bar... "); std::strcat(adieu,LibErrString(err)); throw MyExcept((const char*)adieu); } // otherwise... } However, when SomeAPIRoutine returns an error, the what() string returned by the exception contains only garbage. It occurred to me that the problem could be due to adieu going out of scope once the throw is called. I changed the code by moving adieu out of the member definition and making it an attribute of the class Foo. After this, the whole thing worked perfectly: a try-call block around a call to Foo::bar that catches an exception has the correct (expanded) string in what(). Finally, my question: what exactly is popped off the stack (in sequence) when the exception is thrown in the if-block when the stack "unwinds?" As I mentioned above, I'm a mathematician, not a programmer. I could use a really lucid explanation of what goes onto the stack (in sequence) when this C++ gets converted into running machine code.

  Read the article

• Using ext4 in VMware machine

  First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

  Read the article

• Tomcat Manager Application and HTTP 404 Error

  - by David

  I am trying to set up the admin application for a Tomcat 6.0.24 instance. None of the searches I've done turn up anything I can use. I am using this configuration for Apache 2.2.14: Alias /manager /usr/share/tomcat6-admin/manager <Directory "/usr/share/tomcat6-admin/manager"> Options Indexes FollowSymLinks AllowOverride None allow from all </Directory> ProxyPass /manager ajp://localhost:8009/manager In the tomcat-users.xml I have this: <tomcat-users> <role rolename="tomcat"/> <role rolename="admin"/> <role rolename="operator"/> <role rolename="manager"/> <user username="admin" password="nopasswordforyou" roles="admin,tomcat,manager"/> <user username="operator" password="nevermind" roles="operator"/> </tomcat-users> I found the docs that suggested I needed manager-gui role installed and defined, but that appears to be Tomcat 7, not Tomcat 6. The manager.xml is the default provided with Ubuntu Lucid Lynx 10.04: <Context path="/manager" docBase="/usr/share/tomcat6-admin/manager" antiResourceLocking="false" privileged="true" /> If I access /manager from a web browser, I get a 404 error from Tomcat: "requested resource not available." If I access /manager/images I get the same thing. If I access /manager/401.jsp I get the actual page. In addition, the server.xml has not only the usual Realm (UserDatabaseRealm) but also one for MySQL authentication (JDBCRealm). Investigating this showed that the role of manager was not present there for the user admin; I fixed that by doing: INSERT USER_ROLE_DB SET USER_NAME='admin', ROLE_NAME='manager'; I restarted Tomcat, although I suspect that was overkill. No change. I don't see any errors in catalina.out or in localhost.* log files. What am I missing? What is the interaction between the different realms? How do I get the manager application working?

  Read the article

• How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

  - by chriv

  I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22  | Next Page >