Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 19/287 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• Why does pinging a local router return "Destination Host Unreachable"?

  - by Matt H

  I have two tomato routers. One is bridged wirelessly with the other. I have a new server on the network. It's running Ubuntu Server 11.04. They are all connected like this: A - Linux PC B - New Server C - Mac Mini D - Macbook T1 - Tomato 1 T2 - Tomato 2 They are connected like so: A -----+-T1 ==== wireless bridge ==== T2----- ADSL modem | | C & D Connected wirelessly to T2 B -----+ A, C & D do not experience any issues. I have an active SSH session to B from A and it's not experiencing any loss. B, the new server occasionally cannot ping T2 and therefore cannot connect to the internet. However, A can always contact B and B can ping A and B When the network is lost, B can still ping T1, but not T2 yet at the same as B has lost connection to T2, A can still ping T2. Any ideas on what this could be? there is nothing that gives any clues in any of the logs on either router or the linux server. One thing that is interesting is that I set up a ping running between B and T2. T2 has the IP address 192.68.1.1 Here is what I am seeing: From 192.168.1.1 icmp_seq=26 Destination Host Unreachable From 192.168.1.1 icmp_seq=27 Destination Host Unreachable From 192.168.1.1 icmp_seq=28 Destination Host Unreachable From 192.168.1.1 icmp_seq=29 Destination Host Unreachable From 192.168.1.1 icmp_seq=30 Destination Host Unreachable From 192.168.1.1 icmp_seq=31 Destination Host Unreachable From 192.168.1.1 icmp_seq=33 Destination Host Unreachable From 192.168.1.1 icmp_seq=34 Destination Host Unreachable From 192.168.1.1 icmp_seq=35 Destination Host Unreachable 64 bytes from 192.168.1.1: icmp_req=36 ttl=63 time=3.40 ms 64 bytes from 192.168.1.1: icmp_req=37 ttl=63 time=5.70 ms 64 bytes from 192.168.1.1: icmp_req=38 ttl=63 time=2.25 ms 64 bytes from 192.168.1.1: icmp_req=39 ttl=63 time=2.18 ms 64 bytes from 192.168.1.1: icmp_req=40 ttl=63 time=3.12 ms 64 bytes from 192.168.1.1: icmp_req=41 ttl=63 time=2.15 ms 64 bytes from 192.168.1.1: icmp_req=42 ttl=63 time=1.97 ms 64 bytes from 192.168.1.1: icmp_req=43 ttl=63 time= And it cycles to being reachable and not. So I guess you could say the question is, why is the router responding that it cannot be reached?

  Read the article

• Exploring other windows 8 machine's root

  - by moswald

  (Note, this is without a domain.) I used to be able to type start \\other_machine\c$ in PowerShell and explorer would pop up with a login dialog. Then I'd type other_machine\moswald and my password (the account is a local admin, of course) and I'm in. Now both machines have Windows 8 installed, and this no longer works (the dialog re-prompts with an "Access is denied" displayed). I've verified (through whoami) that the user is named other_machine\moswald, and I'm positive I'm typing the correct password. So what gives? (edited to include specific result)

  Read the article

• What happens when router has been set to incorrect time?

  - by iamrohitbanga

  I have a D-Link router for my home Wi-Fi network. Everyday at least once the internet suddenly goes down. I am simply not able to connect to the Wi-Fi network. If I just restart the router, it starts working. To debug the issue I logged into the admin panel and noticed the time was set to something in 2002. I have set it to the correct time. Will wait to see if that fixes the problem. In the meanwhile I want to know what can go bad when the router has been set to show an incorrect time? What are the kinds of problems expected? My Wi-Fi was working just fine most of the time, but sometimes it lost the connection. Could this be linked to the incorrect time setting?

  Read the article

• how to get ip address of a PPP(Point-to-Point Protocol) network interface?

  - by Xsmael

  I have a Linux machine with two network interfaces, and I'd like to get the IP address of the PPP interface w1g1 but it doesn't show up in ifconfig. There is a public IP on the PPP interface, but there is no internet connection, I'm trying to troubleshoot but I need to get the IP address of the interface and I can't. ifconfig : eth0 Link encap:Ethernet HWaddr 00:30:48:8D:F0:2C inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fe8d:f02c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9970 errors:0 dropped:567 overruns:0 frame:0 TX packets:4338 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1441024 (1.3 MiB) TX bytes:915814 (894.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:675 errors:0 dropped:0 overruns:0 frame:0 TX packets:675 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50659 (49.4 KiB) TX bytes:50659 (49.4 KiB) w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:240 Metric:1 RX packets:748994 errors:0 dropped:0 overruns:0 frame:0 TX packets:748992 errors:0 dropped:0 overruns:0 carrier:3 collisions:0 txqueuelen:100 RX bytes:179758560 (171.4 MiB) TX bytes:179758080 (171.4 MiB) Interrupt:177 Memory:f881c400-f881e3ff w1g1 is connected to a modem by an RJ45<-Serial cable and the modem is connected to the phone line. The modem is a NOKIA DNT2Mi you can see it here Routing table : 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 169.254.0.0/16 dev eth0 scope link default via 192.168.2.180 dev eth0

  Read the article

• User for Public Network

  - by user71604

  my computer can catch the signal for many Access Points for the same network, while the network has problem with internet connection in some APs and it's working in others "all APs have the same SSID" Please advice if as i user i can force my computer to connect with specific AP neither than to go with the one with higher power (through MAC adress or IP)?. I am sure that my computer catch more than 10 signals for APs"All with same SSID". I am using windows 7 home primume 64 bit. as a user i dont have access to the AP config.

  Read the article

• 412 Precodition Failed error only occurs on certain networks

  - by Andy

  One of my favorite websites: http://jessiejofficial.com (yes, I'm a Jessie J Fan :')) has recently started displaying the error message "412 Precondition Failed" whenever I visit it from my home network, even when I use Tor Browser. At first I thought that this was an issue with the whole website, however I have contacted the web developer and he has said that they has been plenty of hits within the last 48 hours. Plus, I discovered tonight that I can access the website from my phone, through the mobile network. So it appears to just be my network as all of the devices in my house connected to the WiFi display the same error when I try to visit any page of the site. However there have been no changes that we are aware of or are noticeable to our network since the website was accessible, and I have just heard that another person in a different part of the country is experiencing the same difficulties also. Any help/advice/suggestions would be appreciated greatly Update: When trying to ping 'jessiejofficial.com' in Windows command prompt the request times out on all four attempts, on any computer connected to the wireless network. I can now also confirm that the same thing occurs on my MacBook Pro.

  Read the article

• iptables blank after reboot

  - by theillien

  We've started encountering an issue with iptables on our RHEL 6.3 systems in that after a reboot, when the service starts, the rules are not loaded. We get the empty ruleset: [msnyder@matt-test ~]$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is in spite of the fact that we have rules defined and the service is, indeed, running. That I know because when I run service iptables start it simply drops back to the prompt. If I run service iptables restart it actually stops and then restarts the service. And, of course, if I run service iptables stop it indicates that iptables is actually stopping. Knowing that I need to restart the service, I do so and the rules load up properly. They simply don't get loaded after a reboot. Unless they get loaded differently during a reboot I don't see how our rules would be wrong. If they were, they wouldn't even load during a service restart. Has anyone else ever encountered this? EDIT: The rules are already saved in /etc/sysconfig/iptables. They are not added on the fly from the command line so service iptables save is unnecessary.

  Read the article

• What can I do to configure my SSH such that it pauses for a flaky connection?

  - by kfmfe04

  I run ssh from OSX to a Ubuntu box - under home WIFI, everything works perfectly. However, when I ssh from certain external networks, ssh may be working fine for a minute or two and then drop due to a flaky network (diagnosed by pinging 8.8.8.8). How can I set up ssh so that it simply waits/pauses rather than drop (when dropping, I have to setup my development environment from scratch - a big hassle). EDIT When I say a bad connection, I mean, for example, ping 8.8.8.8 will work fine for a while, and then fail for 40-50 pings, and then come back on again.

  Read the article

• Slow WLAN file transfer between server and tablet

  - by user266985

  My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

  Read the article

• Problems setting up VLC Sever/client streaming

  - by Ayos

  I'm trying to set up a Linux machine as the server and a Windows XP machine as the client. Both machines are connected to the same local network via a Wi-Fi router. I setup the stream with the following properties : http stream port 8080 play locally And not much else. No firewall on the windows client(Windows firewall is disabled) When I try to open network stream via the client machine(Using VLC or Windows Media Player) I get the following errors: Media Player error code : 0xC00D11B3: Encountered a network Problem. VLC Console: main warning: connection timed out access_mms error: cannot connect to 192.168.1.3:8080 main debug: no access module matching "http" could be loaded main debug: TIMER module_need() : 12625.810 ms - Total 12625.810 ms / 1 intvls (Avg 12625.809 ms) main error: open of `http://192.168.1.3:8080' failed main debug: dead input main debug: repeating item main debug: starting playback of the new playlist item main debug: resyncing on http://192.168.1.3:8080 main debug: http://192.168.1.3:8080 is at 0 main debug: creating new input thread main debug: Creating an input for 'http://192.168.1.3:8080' main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\Accer\LOCALS~1\Temp' main debug: `http://192.168.1.3:8080' gives access `http' demux `' path `192.168.1.3:8080' main debug: creating demux: access='http' demux='' location='192.168.1.3:8080' file='\\192.168.1.3:8080' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "http" main debug: TIMER module_need() : 0.461 ms - Total 0.461 ms / 1 intvls (Avg 0.461 ms) main debug: creating access 'http' location='192.168.1.3:8080', path='\\192.168.1.3:8080' main debug: looking for access module: 2 candidates access_http debug: http: server='192.168.1.3' port=8080 file='' main debug: net: connecting to 192.168.1.3 port 8080 qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'http://192.168.1.3:8080' : 13397.979 ms - Total 13397.979 ms / 1 intvls (Avg 13397.978 ms) qt4 debug: IM: Setting an input Need Help. Thanks in advance.

  Read the article

• Strange network traffic on my dedicated server. How to find out what is causing it

  - by valter

  I noticed a trange outgoing traffic in my dedicated server. I'd like to know how could I find out what is the reason to this. One day traffic One week traffic As you can see, there are bursts of spikes to over 20 megs of outgoing traffic. There is always a lower of outgoing data, before the burst. Is there any command I could use to know with application is causing this? Sorry I couldn't express using the best form.

  Read the article

• How to restrict access to other Wifi networks in range?

  - by meetpd

  Is there a way to access connecting to other wifi networks in range? I have an office and there are few wifi networks in range. Some of them are not password protected and invariably I get connected to that wifi first. I have talked to the person who owns that wifi. But he is somehow not listening about adding password to his network. So, is there a way I can block that Wifi network completely so that I do not connect to it? I have Win 7 and Mac at my office.

  Read the article

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• Is there a free program that can detect which device on my network is causing lag?

  - by malfy

  I'm on a small business network, and rarely we experience really extreme latency. I have no idea what device might be causing the lag, and wanted to know if there was a piece of software that could detect it. I know about some softwares like wireshark, which maybe do what I'm asking? If so it's too complicated to understand. I run the program and I have no idea what I'm looking at, or what parameters to give it. So something that can monitor traffic, as well as describe it in such a way that even a not so network savvy individual can interpret.

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• USB 3 to Gigabit Ethernet adapters: where are they?

  - by intuited

  I'm looking for an adapter that will let me use a USB 3 port as a Gigabit Ethernet port. This is proving surprisingly hard to find! Is there some reason why this product is either unavailable or very obscure? Is there an online shop (US/Canada) where I can buy such an item? Newegg, TigerDirect, NCIX, etc. do not seem to carry such an item. I find this surprising since it will provide at least double the bandwidth (possibly quadruple) compared to a USB 2 Ethernet adapter.

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Network configuration with limited hardware

  - by Pavel

  I have cable internet and I have two PC. One of them has wireless and ethernet, the other pc has ethernet only. Also, I have a dsl modem that has wireless builtin (some common speedstream model). My goal is to connect all of them so that both have internet access. As I understand, I have two options: connect speedstream to the cable and then connect other PC's to speedstream; OR, connect pc with wireless to the cable and then connect the other pc that has ethernet only using ethernet+wireless through speestream. First one seems to be easy, but it doesn't seem to work. What about the other choice? Is it possible to do it?

  Read the article

• Losing connection to server from several computers

  - by user3696358

  I have a PostgreSQL server running Oracle Linux. In my network I have several workstations each running different OS (Fedora, Ubuntu, Windows). Every once in a while I lose connection from the several workstations to the server while other workstations can connect with no problem. If I do service network restart from the server the problem is solved and everyone can work until the next time it returns. Any clues? Thank you, Ben.

  Read the article

• Can I use squid (or anything) to do this?

  - by user269334

  I have a really crappy VPS, and a really good computer at my office (with a really good internet connection), but behind a NAT. Is it possible to expose my good computer by doing this: 1. The good computer connects to the VPS (and keeps the connection alive) 2. The users connects to the VPS, and sends http(s) requests to the VPS. 3. The VPS just passes that http(s) requests to the good computer (including some identifications, so the servers can distinguish connections) 4. The good computer passes that http(s) response to the VPS 5. In turn, the VPS receives the http(s) response, and passes back to the client. Is it possible to do this? (btw, the VPS and the good computer are located in different countries) And also, is this "reverse proxy"? I heard that reverse proxy is for protecting the internal network by putting a middle server. And will this affect SSL configurations? (or make SSL impossible?) I'm intending to run nginx on the good computer. Thanks in advance : )

  Read the article

• How to share a internet connection in a network with openSuse 12.2?

  - by eneepo

  I have to computer and opensuse 12.2 on both of them: Internet 192.168.2.1 | eth0 eth1 First Computer 192.168.2.2 192.168.2.10 | eth0 Second Computer 192.168.2.11 I am following the instruction on http://www.swerdna.net.au/suseics.html but as soon as I enable eth1 on first computer I lose connection with internet. I follow all the instructions I don't know which part I'm miss-configuring.

  Read the article

• Internet connection resets (wifi), no device has wifi for moment

  - by Gizmo

  I have a few devices setup and I noticed this happens with both my old and new router (two different vendors&models) This happens occasionally, and I tried wireshark today and this cought my attention: No. Time Source Destination Protocol Length Info 69 6.464423000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.4? Tell 0.0.0.0 73 7.451146000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 85 9.450443000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 91 10.521000000 LiteonTe_59:65:94 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 93 10.860953000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 97 11.099463000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 where 192.168.2.254 is the gateway/router, 192.168.2.1 my laptop ip and 192.168.2.4 my sisters laptop.. what's happening here?

  Read the article

• Correct usage of Windows Server on network?

  - by Hobart Bosworth

  I have two routers, one with dhcp turned on and the other with it off. this is a functioning home network. Now, I am trying to integrate into it a windows server. Should the windows server be doing the dhcp and dns work? And if so, what will this mean for the existing network? Will I need to reconfigure this? I am currently installing server 2003 onto my server machine. It is connected up to the network on the main router with dhcp. Any words of advice?

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >