Search Results

Search found 688 results on 28 pages for 'splash'.

Page 19/28 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

• Why does plymouth start so late?

  - by Marky

  It appears that starting with 11.04 Plymouth starts so late in the boot process. Sometimes I only have a split second to see it before it transitions to the login screen. This is the same for 11.10. Compared to 10.04 and 10.10, Plymouth starts only a couple seconds or so after Grub and is very visible within the entire boot process. Is there something that can be done to have Plymouth run earlier? I have experienced this on 3 different machines and on 2 of these machines, I've been running Ubuntu since 10.04. So it's not just my notebook's hardware that is causing this. *One a side note, the boot process is one of the ugliest parts of modern Linux. Ubuntu is not excluded. After almost a decade, (I forget but was bootsplash the first?) this still has only been partly solved. For a couple of seconds ugly text is still seen when shutting down. On several ocassions, the same ugly text is seen when logging out of a session. It's never as smooth as you want it to be. Splash themes are great, don't get me wrong. It's just the transitions that are way off and you get glimpses of what's underneath. I'm used to this but for those new to Ubuntu and coming from Windows. It is a turn off.* pardon the rant. :)

  Read the article

• OpenVZ kernel panic

  - by GtoXic

  I recently installed OpenVZ on my VMWare box (To do some testing) and I get the following: https://www.dropbox.com/s/p38btkv5j84bvsh/Capture.JPG the GRUB config is as follows: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/VolGroup00/LogVol00 sysfs.deprecated=1 initrd /initrd-2.6.32-042stab057.1.img title CentOS (2.6.18-238.el5) root (hd0,0) kernel /vmlinuz-2.6.18-238.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-238.el5.img

  Read the article

• Updating windows xp hard drive controller from ubuntu live disk

  - by Joel

  The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

  Read the article

• When copying VM filesystem over netcat, dd copies double the disk size

  - by JivanAmara

  I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

  Read the article

• Is it possible to change the motherboard/bios vendor name? [closed]

  - by vignesh4303

  Possible Duplicate: How can I change my BIOS splashscreen? When we start the system we normally used to get the motherboard/vendor name for e.g i'm having the system with mercury motherboard whenever i restart my system the mercury logo will get displayed(you ll have respected vendors) and the regular process will go on .. my question is Is it there any possibility to change the name and logo of mercury(on my system &it differs based on your motherboard you are using ) on start up? if you are an laptop user "you can see the laptop vendor name e.g "dell" " For asus user's refer Bon Gart's comment ,I am in search of answer those whom feel frustrated about the motherboard/bios splash screen and whom feel to change it

  Read the article

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• Blank screen after grub menu

  - by Tim

  I just rebooted an Ubuntu Server 10.04. After choosing boot options in the grub menu, though, it just displays a black screen with the blinking white underscore in the upper-left corner. The machine has had (hardware) trouble with networking before, but the problem remains after 10 minutes, so I don't think it's the problem now. Booting into recovery mode or using earlier kernels yields the same problem. This also happens if I boot from another hard-drive. I haven't yet tried to boot from CD as the machine lacks a CD reader. How should I diagnose the problem? Update: My boot options are: recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 567[redacted] linux /boot/vmlinuz-2.6.32-29-generic root=UUID=567[redacted] ro quiet splash initrd /boot/initrd.img-2.6.32-29-generic Update: Also, I cannot access the virtual terminals (ctrl+alt+Fn).

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• Unable to run Microsoft Office 2010 install file

  - by Len

  This problem began when I noticed that the icons in the Windows 7 task bar for MS Word and Outlook were generic. I rebuilt the icon cache. Still not the right icons, but not the generic "document" icons either, and both are identical (to each other). The two programs seem to be working OK. So then I tried to repair MS Office. I ran the setup file. It extracts the files, I get the splash screen, and then the message, "Setup has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." with a "Close program" button. Microsoft does not notify me about a solution. What I have tried: 1. running two other copies of the setup program; 2. doing an in-place re-install of Windows 7.

  Read the article

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• How to fix Black screen?

  - by stupidwhiteguy

  so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

  Read the article

• Adding Windows 7 to Fedora 17 Grub Boot Loader

  - by Kyle

  I'm trying to set up a dual-boot situation with my Windows 7 and Fedora 17 partitions and I left the install grub to /boot option on when I was installing Fedora. I would like to be able to add Windows 7 to the grub boot loader, but the advice I've seen online says to modify /boot/grub/grub.conf, but I don't have that file. $ ls /boot/grub/ splash.xpm.gz Has anyone done this? I'm thinking that I'll just need to re-install everything and use the Windows boot loader, but it would be nice to use grub instead.

  Read the article

• .htaccess redirect not preserving http_referer header

  - by CodeToaster

  We're merging with another company, and we want to redirect content from their (Apache) website to our (IIS) site. When traffic arrives at our site, we inspect the HTTP_REFERER, and if the visitor was just redirected from the company's site that we just merged with, they'll be presented with a "splash" page announcing the merger. I've added the line... Redirect / http://www.oursite.com/ ...to their .htaccess, which works fine, except that when the browser is redirected it doesn't send the HTTP_REFERER header. I've tried redirecting with redirect codes 301, 302 and 307 (the default, I believe, is 302) and all have the same effect (redirects fine, but no HTTP_REFERER). Can anyone provide some insight into why HTTP_REFERER wouldn't be included?

  Read the article

• BSOD During Windows 7 Install

  - by matheeeny

  I current have a working XP partition a Dell XPS m1330 laptop along with a working Ubuntu partition. After launching the Windows 7 install DVD from within XP I run through the options for a custom install on a free NTFS partition. Everything seemingly works as it should and then my computer restarts. After choosing to boot into the newly created Windows partition I am given the Windows 7 splash screen only to be followed by the BSOD. Here are the stop codes from the BSOD: stop: 0x0000007b (0x80D86B58,0xc0000034,0x00000000,0x0000000) Googling this tells me that it indicates an 'inaccessable boot drive'. Is it possible that its having problems booting from this partition due to the other existing partitions? I'm thinking that there may be a windows recovery CD workaround this but I am not quite proficient in its capabilities. This is what happens when I try to install by booting from the DVD

  Read the article

• Grub menu not waiting despite of GRUB_TIMEOUT=10

  - by Optimus

  I have Ubuntu 12.04 installed along side of windows 7. The grub menu doesn't seem obey GRUB_TIMEOUT=10, I see the grub menu there for a split second and it immediately defaults to the first option. Grub menu worked fine when I first installed ubuntu. I am not able to pinpoint what exactly broke it(maybe some update?). I did resize my ubuntu partition using gparted but am not sure if that is what caused it. here are my settings from etc/default/grub GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" How do I fix this? Edit: As suggested by 'kamil' this is what I have tried so far with no luck - 1) hold the shift key while booting 2) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub 3) sudo gedit /etc/default/grub edit GRUB_TIMEOUT to `GRUB_TIMEOUT=10` sudo update-grub2 4) at the end of your /etc/grub.d/00_header file, comment out the if condition except for the regular set timeout line like this: #if [ \${recordfail} = 1 ]; then # set timeout=-1 #else set timeout=${GRUB_TIMEOUT} #fi then sudo update-grub and sudo update-grub2 5) install boot repair sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair boot-repair output - Boot successfully repaired. ... The boot files of [The OS now in use - Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) http://paste.ubuntu.com/1220468/ - here is the full boot-repair data Could grub files not being at the start of the disk create such issues?

  Read the article

• Computer hangs on start-up, but re-start always works

  - by user10604

  I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

  Read the article

• PC always boots into Command Line

  - by Neptun1337

  My current Problem is, that when I try to install Ubuntu 12.04 Desktop, neither unity nor gnome are installed. During the installation, I am prompted with the message that only the core is installed, and which additional packages I would like to have installed. When I select ubuntu-desktop, the installer grabs some packages and installs them, but after completing the installation and booting into my Ubuntu, i dont get any GUI, but instead I have the command line interface. When I try to start a new Unity session, i get an error saying that Unity is not installed, so I tried to install it. However this changes nothing, my PC still boots into the Command Line. Are there any solutions to my problem? Any help would be greatly appreciated. Thanks in advance. EDIT: I tried to fix it with the following commands: $ sudo apt-get install ubuntu-desktop $ sudo apt-get install gdm $ sudo /etc/init.d/gdm start When I try to boot, I get the Ubuntu splash screen, but then the screen mainly shows white squares, with a few black ones at the top.

  Read the article

• How do I add a boot from cd option to yaboot?

  - by Sergiu

  So I'm dual-booting Ubuntu 12.04.1 on my iMac G5 powepc alongside Mac OS X and I want to add a boot cd option to yaboot because I'm trying to boot a scratched Mac OS X installation DVD that takes a while to read and the frst bootstrap moves on too fast. How do I edit the timeout for the first bootstrap anyways? So, my main question is, how do I add a cd booting option to yaboot and then, how doI boot it? The devalias from OpenFrmware tells me that 1 have 2 cd-rom instaled, on is /ht/pci@3/ata-6/disk@0 and the other on ends with a 1 instead of a zero. These are the contents of my yaboot.conf file: yaboot.conf generated by the Ubuntu installer run: "man yaboot.conf" for details. Do not make changes until you have!! see also: /usr/share/doc/yaboot/examples for example configurations. For a dual-boot menu, add one or more of: bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ boot="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part2" device=/ht@0,f2000000/pci@3/k2-sata-root@c/@0/@0 partition=4 root="UUID=798a048f-ee48-49e0-bba3-111aed8dee04" timeout=12000 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot enablecdboot macosx="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part3" image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="quiet splash" What do I add here so that yaboot will boot from my cd in like 3 minutes after startup? Thanks!

  Read the article

• Windows 7 extremely long startup

  - by Tyler

  Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

  Read the article

• Kubuntu never gets to the login screen

  - by searchfgold6789

  I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• Outlook hangs during startup by step &ldquo;loading profile&rdquo;

  - by Marko Apfel

  Problem Starting Outlook shows only the splash screen with comment “loading profile”. I could cancel the startup but restarting shows the same. I verified with Task Manager that no hidden outlook process is bother me. Solution Scanpst Normally with Outlook the tool “Microsoft Outlook Inbox Repair Tool” (scanpst.exe) is additionally installed. Some people could access it via Startmenu, but not me. My lovely Launchy found it under "C:\Program Files (x86)\Microsoft Office\Office14\SCANPST.EXE" Scanpst first ask you for the pst file which you would like to scan. I started with the first default offer: C:\Users\…\AppData\Local\Microsoft\Outlook\….ost And this brings up the information, that another application uses this file. Handle To investigate the causer Handle from Sysinternals is your friend in such cases. Start it from an administrative console and pipe the output to a file. handle > c:\temp\handle.txt Now you could open this file with the editor of your choose and search for the blocked file (your pst file). On top of the section you see the application which has a handle to this file opened (SfdcMsO1.exe). Task Manager Kill this application and start Outlook again. And voila – everything starts up fine … by me

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >