Search Results

Search found 1919 results on 77 pages for 'triple monitors'.

Page 19/77 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • How can I get nvidia-settings to work?

    - by Palace Chan
    I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

    Read the article

  • Can no longer boot with rEFIt and Grub on early 2006 MacBook Pro

    - by Don Quixote
    I don't know what happened to cause this. I have Snow Leopard, Ubuntu 11.04 Natty Narwhal and Windows XP SP3 on my early 2006 MacBook Pro. It is a Core Duo unit, NOT Core 2 Duo, so it is 32-bit only - Model Identifier MacBookPro1,1. I use rEFIt 0.14 for my boot menu. For some reason neither XP nor Ubuntu would boot anymore. I'd just get a black screen with a rapidly flashing underscore in the top-left corner. Having both those OSes failing to boot suggested a problem with the boot loader in my MBR. The rEFIT partition tool verified that my MBR partitions were still synced with my GPT partitions, so I rewrote my MBR partition table with fdisk while booted from Parted Magic: # fdisk /dev/sda (fdisk warns about the disk having a GPT. I press on anyway.) p (Print the existing partition table to make sure it's OK.) w (Write the old partition table back to disk. This also writes a new MBR boot loader.) After this XP would boot but Ubuntu would not, with the same symptom. Now I used update-grub while chrooted into Ubuntu from Parted Magic: # mount /dev/sda3 /mnt # mount --bind /dev /mnt/dev # mount --bind /sys /mnt/sys # mount --bind /proc /mnt/proc # chroot /mnt Chroot issues some warnings about not being able to identify some group IDs. I don't know why that happens, or whether it is a problem. At this point while I am still booted off of Parted Magic's kernel, I am running from Natty's filesystem. # update-grub Update-grub detects each of my operating systems then claims to complete successfully, but still won't boot. I asked this same question over at rEFIt's Sourceforge support forum but there have been no replies yet. I also Googled quite a bit, and see many who have the same black screen problem, but none of their situations seem quite like mine. Thanks for any help you can give me. -- Don Quixote

    Read the article

  • Ubuntu 12.4 cursor changes

    - by mantic0
    I have a weird problem with my Ubuntu 12.4 dual screen setup (Toshiba laptop + one monitor). After a while the cursor on one screen completely changes its shape (not every time). I don't really know how to describe it because it's always something else. Sometimes I get four or five vertical lines instead of a cursor, sometimes I can only see part of the cursor, etc, sometimes weird shade appears. This only happens on one screen simultaneously. If I go to the other screen, the cursor appears to be fine but when I change screens, the cursor changes. I tried to do a screenshot but when I do, the cursor looks just fine. I'm using Unity and Gnome 3 but the problem is on both desktop environments. Nothing is wrong with my screen though because I'm also using Windows and I don't have any problems there.

    Read the article

  • wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

    - by s1lv3r
    I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

    Read the article

  • Is this a dual monitor reset bug?

    - by Tentresh
    My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

    Read the article

  • Ubuntu on USB does not boot on MacBook

    - by Sean H
    Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

    Read the article

  • How to make Ubuntu recognize an unknown external display (so I can adjust its resolution)?

    - by WagnerAA
    I have a Dell laptop with an external monitor attached (a Samsumg SyncMaster 931c). My laptop display was recognized, and I can adjust its optimum resolution. My external display is still unknown, thus I'm stuck at a lower resolution (1024x768): I tried the "Detect Displays" button, but it didn't work, nothing happens. I recently upgraded from Ubuntu 12.04 to 12.10. Things were working before. I don't know if I can actually change this configuration, or if this is a bug. I searched for an answer here and also in Launchpad's website, but found none. I even tried to install Nvidia drivers, and just messed things up. It seems I wasn't even using nvidia before, as I guessed by looking at my additional drivers configuration: My laptop has an Intel chipset, I guess: $ dpkg --get-selections | grep -i -e nvidia -e intel intel-gpu-tools install libdrm-intel1:amd64 install libdrm-intel1:i386 install nvidia-common install xserver-xorg-video-intel install I don't have an xorg.conf file (I think this is nvidia related, am I right?): $ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory $ ls -l /etc/X11/ total 76 drwxr-xr-x 2 root root 4096 Out 19 23:41 app-defaults drwxr-xr-x 2 root root 4096 Abr 25 2012 cursors -rw-r--r-- 1 root root 18 Abr 25 2012 default-display-manager drwxr-xr-x 4 root root 4096 Abr 25 2012 fonts -rw-r--r-- 1 root root 17394 Dez 3 2009 rgb.txt lrwxrwxrwx 1 root root 13 Mai 1 03:33 X -> /usr/bin/Xorg drwxr-xr-x 3 root root 4096 Out 19 23:41 xinit drwxr-xr-x 2 root root 4096 Jan 23 2012 xkb -rw-r--r-- 1 root root 0 Out 24 08:55 xorg.conf.nvidia-xconfig-original -rwxr-xr-x 1 root root 709 Abr 1 2010 Xreset drwxr-xr-x 2 root root 4096 Out 19 10:08 Xreset.d drwxr-xr-x 2 root root 4096 Out 19 10:08 Xresources -rwxr-xr-x 1 root root 3730 Jan 20 2012 Xsession drwxr-xr-x 2 root root 4096 Out 20 00:11 Xsession.d -rw-r--r-- 1 root root 265 Jul 1 2008 Xsession.options -rw-r--r-- 1 root root 13 Ago 15 06:43 XvMCConfig -rw-r--r-- 1 root root 601 Abr 25 2012 Xwrapper.config Here is some information I gathered by looking at other related posts: $ sudo lshw -C display; lsb_release -a; uname -a *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:48 memory:f6800000-f6bfffff memory:d0000000-dfffffff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6100000-f61fffff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:qt4-3.1-amd64:qt4-3.1-noarch Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux Batcave 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ xrandr -q Screen 0: minimum 320 x 200, current 2304 x 800, maximum 32767 x 32767 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 1790mm 1280x800 59.9*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+1280+32 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) If there's anything else I can do, any other information I can post here, to help me configure this external display, please let me know. If this is actually a bug, I apologize (I know bugs are not allowed here), but I really wasn't sure. And I will promptly file a bug report in Launchpad if that's the case. Thanks a lot in advance. ;)

    Read the article

  • Unity displays a black screen when connecting an external monitor

    - by Bragboy
    I upgraded my ubuntu from 10.10 to 11.04 and since that day I have been facing issues with Dual Monitor in Ubuntu. When I connect my second monitor during boot time, everything works fine. But when I use my laptop and try to connect a monitor when I am running Ubuntu, I face a weird black screen issue. To see what I mean, following is a screenshot of the same. Here are the problems that happen Desktop background goes away As you can see on the left hand side of the desktop, the right and top portions are black The usual buttons - power button, mail, volumne etc., on the top panel do not work as expected Plus it suddenly crashses at times. And a lot of n other issues associated with this. Is there any patch/release that has happened for these bugs or should I report it anywhere? Help needed.

    Read the article

  • Default program startup display

    - by Tony Martin
    I have a dual display setup and would like to be able to set which display a piece of software starts on. Most software seems to return to the last display but Stellarium always starts in the primary display. Does Linux have a way of forcing the startup display or is it something the individual program has to manage? Thanks. EDIT And with no changes on my part Stellarium is behaving nicely and remembering which screen it was on. Still nice to know if there is a way of forcing this.

    Read the article

  • Building a six-screen setup. What video cards options are there?

    - by Stephan
    I'm building myself a nice setup with a massive amount of screen real estate. Since I had/have problems with video drivers in the past. I'm asking for advise here first. I want to connect at least six screens. What are the best options? What are the pitfalls? I preferably would not like to use closed binary blob drivers. usecase scenario: I'm writing a piece of software that has to interact with other systems. I would like to be able to see all of those systems, my code, lots of log files and documentation without the need to swap windows/screens. To just better see what im doing.

    Read the article

  • Second display is rotated

    - by pram
    I've just updated to Ubuntu 12.10 last night. When I was at the office, I connected my laptop with a projector. Although it can detect the projector, it incorrectly set the projector portrait. Also, if I click the Rotation dropdown, it has no Normal option. It only offered Anticlockwise and Clockwise options. Ofcourse the projector would display my desktop 90 degrees clockwise/anticlockwise. I've just test my laptop again with an LCD monitor, and it happened again. Below is my screenshot for display settings. My display adapter is Intel GMA 950. How to fix this problem?

    Read the article

  • Ubuntu 12.04 Touchscreen Calibration

    - by Lee
    I have a machine with Ubuntu 12.04 installed, with dual monitor, via VGA and DVI Interface. The monitor is one touch screen and the other one is regular LCD Monitor. The touch screen is made in China with some unknown brand, and I am using eGalax Driver. The touch screen is now detected and works, but i need to do some calibration since it does not correctly perform click on touch. The problem is, when I’m using xinput_calibrator, it shows 4 crosses to be clicked on, because I’m using dual monitor, the crosses is now show 2 on the touch screen (touchable) and the others on the other monitor which is regular non-touch monitor. Please help, thank you.

    Read the article

  • Gnome panel hides window titlebar.

    - by Xorty
    I moved my laptop screen "below" external screen (was using left/right config before). There's a little problem. When my gnome panel is on top of laptop screen, all windows I maximize "drawn" under top gnome panel. Therefore, I cannot see window titlebar. I tried suggested fixes as metacity --replace and so on, but none worked. When I move my taskbar to bottom it works just fine. Any ideas? Thank you.

    Read the article

  • How can I make multiple displays work on my Asus UX32VD?

    - by oKtosiTe
    Original title: Why do I have two trash icons in the Unity Launcher? Whether I run Ubuntu as a live-USB or install it, I always have two trash bins on the Unity Launcher. Both work, and both open the same location. This seems a bit redundant; what could be done about it? Update: Turning auto-hide on made it obvious that I have multiple Launchers showing. With auto-hide off, they simply overlap, making it look like there's a double trash icon, but with auto-hide enabled, I can display one Launcher (and therefore one trash icon) at a time. Still, two are running simultaneously. Second update: This problem appears to be caused by the way Ubuntu handles multiple displays on my Asus UX32VD Ultrabook. Somehow, the laptop display cannot be used while my external display is connected. It is shown in the Displays list, but remains black no matter how I configure it. The external display runs at 1920x1200, the laptop monitor should run at 1920x1080. It therefore becomes obvious that the Launcher that's supposed to run on the laptop display, is actually displayed on the external monitor. Using nomodeset as a kernel parameter as indicated here makes the laptop display inaccessible altogether, detecting the external monitor as the laptop display and making resolutions other than 1920x1200 inaccessible. That is not an option.

    Read the article

  • Resolution changes when using switch

    - by Edward D
    So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

    Read the article

  • Lenovo Y460 Intel Driver Secondary Display Flickering

    - by ultimatebuster
    This is a part of the massive dump of problems I'm encountering with my Lenovo Y460 and Ubuntu. Problem: ATI PowerXpress doesn't really work. Doesn't work as I have to use the open source driver with hacks. Turned off ATI card at boot Details on how I accomplished that: http://ubuntuforums.org/showthread.php?p=10955831#post10955831 Installing the ATI drivers results in a failure of the intel drivers to work with Ubuntu Class (all animations have to turned off). Anyway to fix this problem to allow switchable graphics to work? The problem above has been fixed by FGLRX (Catalyst 11.6) is it compatible with kernel 2.6.39? However, there's another issue. If I connect my secondary monitor (VGA 17'') while using the Intel driver, I would not be able to use that screen as there's flickering and tearing, making the screen blurry and usable. Here's the fglrxinfo: $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile GEM 20100330 DEVELOPMENT OpenGL version string: 1.4 (2.1 Mesa 7.10.2) Any fixes for that? Potential related bug report on launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/750259 However I can't confirm because the video showing that is much more dramatic than what I have, mine are tiny flickering that won't be captured by video cameras as I've tried, but enough to make it blurry for humans.

    Read the article

  • Dual monitor setup can cause boot problem?

    - by kriszpontaz
    I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

    Read the article

  • How do I get one monitor on top of the other in Ubuntu 10.10?

    - by Jan
    I'm using a laptop and a monitor (wall mounted) over my laptop. I would like to reflect this physical hardware setup in my software screen setup. So that I can move my mouse upward, out of my laptop screen and use the monitor on the wall. I have been searching for a solution for a while, and I hope somone can help me out. I'm using Ubuntu 10.10 "out of the box". Side by side screen setups works just fine, over/under is doesn't work.

    Read the article

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • Ubuntu Lock Screen Conflict with Google Chrome

    - by S.K.
    I don't know if this is a "feature" or not, but when I lock my screen in Ubuntu (GNOME 3), if Google Chrome needs to show a JavaScript alert (like if I set a reminder for an event in Google Calendar), Chrome will show up on top of the lock screen. If you'd like to simulate it, try running this JSFiddle, just click on the green box and lock your screen before the alert shows up - http://jsfiddle.net/skoshy/ZYSYr/ Anyone know how to fix/avoid this?

    Read the article

  • Modal popup showing on the wrong monitor

    - by Chase Seibert
    On Ubuntu 11.10, I'm seeing modals from many applications show up on a different monitor from their parent application. In this example, Firefox, the application on the right most monitor, has popped up a modal dialog in the center monitor. You'll notice that it is not just on the wrong monitor, it's also positioned horizntally against the left edge of that monitor. Vertically, it's centered. This happens for at least Firefox, Eclipse and gedit modals. It seems like it's all applications. It doesn't matter which monitor the parent application is on, the modals are always on the left edge of the center monitor.

    Read the article

  • keyboard shortcut to switch focus between separate X screens?

    - by ang mo
    I'm using XFCE on a dual monitor setup, with Xorg configured to separate X screens (neither twinview nor cinerama is working on GF470 with latest nvidia drivers). I'm not using xrandr. Suppose I have firefox running on one screen (:0.0) and thunderbird on the other (:0.1). When I want to switch focus from thunderbird to firefox, I need to move my mouse pointer to the firefox window and click (alt-tab switches between windows on a single screen only). Is there any keyboard shortcut for switching focus between screens?

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • 13.04 - Extenal monitor plugged on laptop HDMI shows image but lags a lot

    - by Thiago Fassina
    It uses an Nvidia GeForce GTS 250M. When I plug in the monitor, it shows some images but with bad FPS and lagging a lot. For example, when I move the mouse pointer, it leaves a trail that vanishes from time to time. I didn't install Nvidia drivers because every time I did this on past versions I ended up with an unbootable system. On past versions I just gave up trying to use the monitor cause it never showed anything regardless of what driver I installed. But since 13.04 ALMOST made it, I'll make another tries. ps.: Works perfectlty on Windows 7/8

    Read the article

  • Automatically move Xubuntu panel to external monitor

    - by user1291235
    I am using xubuntu 13.04 with a dualmonitor setup. (external monitor as primary, laptop als secondary) I am using xandr to makeup my monitorsetup. However I recognized that the xubuntu panel on the top by default will always be placed on the laptop monitor. I know that i can move the panel via the panel preferences. This works. But i want to somehow either let it move automatically to the right monitor (the primary one) or to move it with a terminal command (so i can create a script which takes care of moving the panel to the primary monitor)... any ideas?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >