Search Results

Search found 1767 results on 71 pages for 'win7'.

Page 19/71 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Please Help to bring back power to my machine

  - by Acess Denied

  I Have a samsung N150plus netbook That I have been using for a while now. I left it on and plugged to a wall outlet and went to bed. I dual boot ubuntu and win7. I tried to update the win7 to sp1 and I dozed off. I woke up and saw the machine has been booted to ubuntu and logged in as guest, which translate to mean one of my room mates have tried to use the machine and they all have denied using my machine. I tried to reboot to windows and then it appears to have no cpu, hard disk and cpu fan activity. only one led seems to come on when i plug it in. its only the led that indicate the machine is powered on powers steadily. I really cant afford to buy a new machine now and I need the machine to complete my last project in school for my last year. Help Please

  Read the article

• Triple Boot Question

  - by Rick

  I have successfully set up a a win7,win8 and Ubuntu 12.10 system. Windows 8 and Ubuntu are located on the same SSD, while windows 7 is located on another SSD. All went great and I can continue playing around with all 3 OS's. My only annoyance is, while restarting, windows 7 boot loader runs first. If I select ubuntu in the win7 manager it then runs grub2 and asks me to select an os. I used easy bcd to add entries into win8's boot manager and was hoping to just use that one. I installed ubuntu's loader on to its own partition. Any suggestions to just use Win8 loader and still be able to choose between all 3?

  Read the article

• Upgrading a dual-boot system HDD

  - by Jason

  I dual-boot my laptop due to lousy VM performance, and have a new 500GB/7200rpm drive coming in to replace the stock 320GB/5400rpm drive. I have the drive set up in three partitions: one for the Win7 system files, one for storage, and the third as the ext4 Linux file system. The system file and storage partitions are both NTFS. What I'm planning to do is use the system image creator built in Win7, then move that over to the new drive. However, how can I migrate the Ubuntu partition, and how do I make sure that the Grub bootloader isn't overwritten by the Windows loader?

  Read the article

• Ubuntu 12.04 - no wireless network recognized

  - by Itai

  I just installed Ubntu 12.04 along with WIN7 on the same laptop - Dell Vostro-3560. Now, on Win7 i can access to different wi-fi networks. However, when i am logging onto the Ubuntu section (after re-starting my laptop) - an error message appears: "Disconnected - you are now offline". When i take a look at my network menu (in the upper bar on the screen), i see that no network is found (and i have a few of them in the area...). I tried to look around but really could not find a concrete practical solution to this specific problem, would appreciate any solution from anyone out there that had this problem and solved it. Thanks... Itai

  Read the article

• Ubuntu fail to start on a dual boot with Windows 7 on Vaio

  - by user94628

  I followed the instructions for the Ubuntu windows installer on my Sony Vaio laptop (model SVT131A11M). Upon restart I was prompt to choose the OS for boot (Win7 or Ubuntu), but then I shut down the machine and from the next boot, every time I choose to boot into Ubuntu, the GNU GRUB terminal appears with a grub> prompt. Now I'm able to boot into Win7, but can't boot into Ubuntu properly. Why does it happen and how come I was able to start Ubuntu successfully the first time?

  Read the article

• how to download and install from the internet >> skype and realplayer

  - by ADAM

  i had corrupted win7 by dead blue screen and stopped rebooting or installing or safe mode. just death i installed linux unubtu one i still unable to install my wireless stick modem for surfing internet wirelessly form my provider vividwireless i don't know where or how to download porg and app from the net like real player and skype and others and to intall them. even i cannot find them after download. can i revive and reboot or fix my dead win7 os from linux. i can connect internet from wireless network in the neighborhood linksys!! what is linksys anyway? how to use linux ubuntu same way like windows? ie. insalling, using cd rom for installation and downloading and cleaning history and cache and system restore? please email me to: [email protected] any help..step by step many thanks

  Read the article

• I cannot create Rails app on Netbeans 7.0. It hangs at the point 25%.

  - by user28931

  My development env. is, Win7 Ultimate Ruby 1.9.2p180 Rails 3.0.9 Gem 1.8.5 sqlite3 and mysql2 gems are installed My IDE is netbeans 7.0. ruby plugin for netbeans 7.0 is installed. i want to create a new rails app thru netbeans. but it hangs at the process of 25%. does someone hit the same issue? Is there a solution? From the output, i can see the rails app file structures are created. I know some of you may suggest me to use linux to develop rails app. that's an option. but i am newer to linux. i'd like to use win7 at present.

  Read the article

• Ubuntu 12.04 does not start

  - by ferr

  Im using Lenovo G580. I installed Win7 first, two months ago. Now, i want to install Ubuntu 12.04. I used usb for installation. It went very well, but when i was reboot laptop after installation, it started Win7 not Ubuntu or bootloader for choice. LiveUbuntu is working very well. I tried install ubuntu a couple of times from other .iso. I tried recover Grub. When i change "boot" flag in gparted to partition with Ubuntu, BIOS show me error "missing operating system".("boot" flag is optionally on Windows partition c:/). Can it be hardware mistake? Or i did some mistakes?

  Read the article

• RegLoadAppKey working fine on 32-bit OS, failing on 64-bit OS, even if both processes are 32-bit

  - by James Manning

  I'm using .NET 4 and the new RegistryKey.FromHandle call so I can take the hKey I get from opening a registry file with RegLoadAppKey and operate on it with the existing managed API. I thought at first it was just a matter of a busted DllImport and my call had an invalid type in the params or a missing MarshalAs or whatever, but looking at other registry functions and their DllImport declarations (for instance, on pinvoke.net), I don't see what else to try (I've had hKey returned as both int and IntPtr, both worked on 32-bit OS and fail on 64-bit OS) I've got it down to as simple a repro case as I can - it just tries to create a 'random' subkey then write a value to it. It works fine on my Win7 x86 box and fails on Win7 x64 and 2008 R2 x64, even when it's still a 32-bit process, even run from a 32-bit cmd prompt. EDIT: It also fails in the same way if it's a 64-bit process. on Win7 x86: INFO: Running as Admin in 32-bit process on 32-bit OS Was able to create Microsoft\Windows\CurrentVersion\RunOnceEx\a95b1bbf-7a04-4707-bcca-6aee6afbfab7 and write a value under it on Win7 x64, as 32-bit: INFO: Running as Admin in 32-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\ce6d5ff6-c3af-47f7-b3dc-c5a1b9a3cd22' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey) at LoadAppKeyAndModify.Program.Main(String[] args) on Win7 x64, as 64-bit: INFO: Running as Admin in 64-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\43bc857d-7d07-499c-8070-574d6732c130' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck) at LoadAppKeyAndModify.Program.Main(String[] args) source: class Program { static void Main(string[] args) { Console.WriteLine("INFO: Running as {0} in {1}-bit process on {2}-bit OS", new WindowsPrincipal(WindowsIdentity.GetCurrent()).IsInRole(WindowsBuiltInRole.Administrator) ? "Admin" : "Normal User", Environment.Is64BitProcess ? 64 : 32, Environment.Is64BitOperatingSystem ? 64 : 32); if (args.Length != 1) { throw new ApplicationException("Need 1 argument - path to the software hive file on disk"); } string softwareHiveFile = Path.GetFullPath(args[0]); if (File.Exists(softwareHiveFile) == false) { throw new ApplicationException("Specified file does not exist: " + softwareHiveFile); } // pick a random subkey so it doesn't already exist var keyPathToCreate = "Microsoft\\Windows\\CurrentVersion\\RunOnceEx\\" + Guid.NewGuid(); var hKey = RegistryNativeMethods.RegLoadAppKey(softwareHiveFile); using (var safeRegistryHandle = new SafeRegistryHandle(new IntPtr(hKey), true)) using (var appKey = RegistryKey.FromHandle(safeRegistryHandle)) using (var runOnceExKey = appKey.CreateSubKey(keyPathToCreate)) { runOnceExKey.SetValue("foo", "bar"); Console.WriteLine("Was able to create {0} and write a value under it", keyPathToCreate); } } } internal static class RegistryNativeMethods { [Flags] public enum RegSAM { AllAccess = 0x000f003f } private const int REG_PROCESS_APPKEY = 0x00000001; // approximated from pinvoke.net's RegLoadKey and RegOpenKey // NOTE: changed return from long to int so we could do Win32Exception on it [DllImport("advapi32.dll", SetLastError = true)] private static extern int RegLoadAppKey(String hiveFile, out int hKey, RegSAM samDesired, int options, int reserved); public static int RegLoadAppKey(String hiveFile) { int hKey; int rc = RegLoadAppKey(hiveFile, out hKey, RegSAM.AllAccess, REG_PROCESS_APPKEY, 0); if (rc != 0) { throw new Win32Exception(rc, "Failed during RegLoadAppKey of file " + hiveFile); } return hKey; } }

  Read the article

• Print jobs sent to server OK, but then get deleted

  - by Paul Morrison

  I have 2 HP computers, one running Win XP SP3, one running Win7. I have a Lexmark X4270 All-in-One printer attached to the Win7 machine via a USB port. I can print OK from the Win 7 machine, but when I print from the WinXP machine, the print job shows up in both print queues (showing the same number of bytes - which is good!), but then the status gets changed to "Deleting - Sent to printer", and that status shows up in both print queues. The print job then stays there until I do a cancel, followed by a system restart. FWIW the owner is shown as Guest, but I have permission for Everyone set to print... I believe I have up-to-date drivers; I don't believe it's a firewall problem. What I would like to see is the Win7 machine's reason for deleting my print jobs - is there a diagnostic tool available? Also, I notice that the port for this printer on the WinXP machine is set to USB001 - I would have thought something like \servername\sharedprinter would be more appropriate - and I can see that in the list of ports, but the system doesn't let me change the port name from USB001... Could someone shed some light? I have spent hours on this! TIA BTW I can do file sharing, no problem!

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

  - by Simon

  Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• BIOS setting: AHCI or RAID (when using SSD + 2x HDD in RAID-0)

  - by nixdagibts

  Hello there, I want to add a new SSD and use it as system drive with Win7 x64 installed. As driver I chose newest Intel Rapid Storage driver (not MSAHCI). I know that I have to use AHCI as BIOS setting for optimal SSD read/write performance. But I'm also using 2 normal HDDs as separate RAID-0 SSD: Win7 HDD: RAID-0 HDD: RAID-0 If I set my BIOS on my ASUS P5W DH Deluxe to AHCI, my RAID-0 cant be recognized And If im using RAID as setting, maybe my SSD has not its top speed. But I'm not sure about that. In short: AHCI no RAID-0 RAID no optimal SSD performance (?) Now my question: Can I use RAID as BIOS setting and be sure, that theres no decrease in SSD performance? Google finds so many articles with similar topics and my head is just exploding. Two examples: - set AHCI and after installing OS switch to RAID as BIOS setting... what? - use a diskette and F6 while installing win7... really? O.o I thought those times are gone

  Read the article

• How do I create an MBR on a USB stick using DD command line tool

  - by Lana Miller

  Okay I'm trying to create a BOOTABLE Windows7 image on a USB key from a Mac running Lion. My image is .iso format. I tried: sudo dd if=/Users/myusername/Win7.iso of=/dev/disk1 bs=1m And this succeeded in writing the files, except in DISK UTILITY on the mac, it shows the partition type as GUID Partition Table and not 'Master Boor Record'. Booting the key on my Vista computer yields the error "No boot sector on USB Device' From what I can tell, bs=1m in the DD command should have left 1 Megabyte for the boot sector, but for some reason this area of the USB Key is not set up correctly so that it will boot How can I fix this, or correctly use dd to write a bootable cd image such that it is now a bootable usb drive? Note: in the instructions I read about, they recommended renaming my Win7.iso to Win7.dmg before using DD, which made absolutely no sense to me, so I didn't do it. I could try with that step now, but it takes 1.99 hours to write the image to the USB drive so there is a huge penalty to trial and error here. Thank you.

  Read the article

• Can't ping guest OS from Windows XP SP3 host running VIC.

  - by Vittal

  Hi, I am running VMware ESX Server 3i Version 3.5.0 and accessing this server using VMware Infrastructure Client Version 2.5.0 on a Windows XP SP3 machine. I have enabled the Microsoft TCP/IP version 6 stack and assigned an IPv6 address (using the netsh command) to the network adapter. The guest OS'es running on ESX Server (includes Win7, W2K8, WinXP) also have IPv6 addresses enabled on their adapters. The adapters are configured to be in VM Network (Bridged mode) and hence have connectivity to the Internet. The VMs are able to ping each other using IPv6 addresses and are also able to ping a physical Win7 machine using IPv6 addresses. However, the Windows XP SP3 machine on which the Client is running is not able to ping any hosts running on ESX Server while the VMs are able to ping this host. Whenever I try to ping from WXP box I get the "Invalid source route specified." error. The WinXP machine is not able to ping the Win7 physical machine too (the same error as above is thrown). Can someone help me understand why I am receiving this error and what I need to do to resolve this error? Thanks, Vittal

  Read the article

• New SSD, is the MBR broken? DISK BOOT FAILURE

  - by Shevek

  I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

  Read the article

• Random "not accessible" "you might not have permission to use this network resource"

  - by Jim Fred

  A couple of computers, both Win7-64 can connect to shares on a NAS server, at least most of the time. At random intervals, these Win7-64 computers cannot access some shares but can access others on the same NAS. When access is denied, a dialog box appears saying "\\myServer\MyShare02 not accessible...you might not have permission to use this network resource..." Other shares, say \\myServer\MyShare01, ARE accessible from the affected computers and yet other computers CAN access the affected shares. Reboots of the affected computers seem to allow the affected computer to connect to the affected shares - but then, getting a cup of coffee seems to help too. When the problem appears, the network seems to be ok e.g. the affected computers can access other shares on the affected server and can ping etc. Also Other computers can access the affected shares. The NAS server is a NetGear ReadyNas Pro. The problem might be on the NAS side such as a resource limitation but since only 2 Win7-64 PCs seem to be affected the most, the problem could be on the PC side - I'm not sure yet. I of course searched for solutions and found several tips addressing initial connection problems (use correct workgroup name, use IP address instead of server name, remove security restrictions etc) but none of those remedies address the random nature of this problem.

  Read the article

• MSMQ on Win2008 R2 won't receive messages from older clients

  - by Graffen

  I'm battling a really weird problem here. I have a Windows 2008 R2 server with Message Queueing installed. On another machine, running Windows 2003 is a service that is set up to send messages to a public queue on the 2008 server. However, messages never show up on the server. I've written a small console app that just sends a "Hello World" message to a test queue on the 2008 machine. Running this app on XP or 2003 results in absolutely nothing. However, when I try running the app on my Windows 7 machine, a message is delivered just fine. I've been through all sorts of security settings, disabled firewalls on all machines etc. The event log shows nothing of interest, and no exceptions are being thrown on the clients. Running a packet sniffer (WireShark) on the server reveals only a little. When trying to send a message from XP or 2003 I only see an ICMP error "Port Unreachable" on port 3527 (which I gather is an MQPing packet?). After that, silence. Wireshark shows a nice little stream of packets when I try from my Win7 client (as expected - messages get delivered just fine from Win7). I've enabled MSMQ End2End logging on the server, but only entries from the messages sent from my Win7 machine are appearing in the log. So somehow it seems that messages are being dropped silently somewhere along the route from XP or 2003 to my 2008 server. Does anyone have any clues as to what might be causing this mysterious behaviour? -- Jesper

  Read the article

• How to (re)enable the "New" context menu items for an administrator when right-clicking in a folder and selecting New > X?

  - by Metro Smurf

  I just migrated from XP x86 to Win7 x64 (clean install). I had a couple of data drives in my XP x86 system that I physically moved to my Win7 x64 system. When browsing a directory in any of the transferred drives, the only option available in the 'new' context menu is "Folder", i.e., Right-Click inside a folder New Folder (this is similar behavior for Win7 when using the context menu in c:\Program Files): However, whenever creating a new folder within any of the directories, all the context menu new items are available within the new folder: Steps I've taken that have failed to add the new context menu items: Removing all security permissions from a directory and sub-directories. Replacing them with new permissions. As well as removing inheritable permissions from the parent. Taking explicit ownership of a directory and sub-directories. Combing the above two. Sample of Effective Permissions that do not work: Steps I've taken that have succeeded to add the new context menu items: Adding the "Everyone" group to the drive and giving the group explicit "Modify" privileges. Giving the "Everyone" group explicit privileges smells wrong. I'm an administrator on my system; why should I have to add the "Everyone" group as well? Adding my username to the drive and giving full permissions. Again, since I'm an administrator on my system and the administrators group already has full control of the drive/directories/folders, why should I have to explicitly add my user name to the security permissions? Finally, The Question: Is it possible to have the New Item context menu have all available options by default without having to explicitly add the everyone group or a specific user name to the security permissions? I'm suspecting that the option may not be available unless the username is explicitly added to the security permissions. Of note: I've seen the registry hacks for updating the new items context menu; my preference is to avoid such hacks and return the functionality to the expected behavior an administrator should have.

  Read the article

• SQLCODE -1390 connecting to DB2 64 bit client from 32 bit app

  - by Oliver Abraham

  Hi there, I've got a 32 bit application that connects normally to a DB2 database. (written in C) When I run it on a machine with a DB2 64 bit client, I get a SQLCODE -1390 from connect. (Win7 64 Bit, DB2 V9.7 client 64 bit) Connecting from the command line works (db2 connect to ...) With a 32 Bit DB2 client on the same Win7 64 Bit machine, the connect also works. Does anyone has an idea how to fix it ? Best regards Oliver

  Read the article

• Send data to LPT on windows XP

  - by gigi

  I want to send data to a printer on LPT1 and i trying exactly this but my CreateFile returns -1 (The system cannot find the file specified.Exception from HRESULT:0x80070002). How to open LPT1 port and send data to? I am trying this on XP and after that in win7 64 bit because from what i've read working with LPT in win7 64 bit is a bit of a problem, or should i say 64 bit of a problem:) PS:Since it's my first post this year: Happy New year to everybody.

  Read the article

• Win 7 doesn't have SMTP Server

  - by Son

  Currently, i am working on sending/receiving mail project on Win7, i want to use Seolib.dll (COM) to handle for event sending/receiving mails but Win7 is not supported this one. So is there any solution for this issue?

  Read the article

• Defining decimal numbers on different operation system, how to understand if point or comma is used

  - by Cmptrb

  Hi, I have written a small program where the program works differently on different operating systems (xp, win7) The problem is the program reads some float numbers such 2,686. One operating system (win7) convert it to float true, but on xp it goes wrong and print it 2686. How can I understand which symbol the operation system uses for decimal numbers ? Thanks.

  Read the article

• System.EnterpriseServices.Wrapper.dll error

  - by Elaine

  this has driven me crazy, Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. (Exception from HRESULT: 0x800700C1) Source Error: Line 1: <%@ Application Codebehind="Global.asax.cs" Inherits="PMP.MvcApplication" Language="C#" % Yesterday, I shut up my WIN7, an windows update was pending there without any process for nearly one hour, then I shut my laptop . and when i re-opened my win7 and ran the PMP MVC application, this error occured. I finished that pending windows update. but no help. I googed to find that should re-install .net framework 1.1/2.1, i tried but nothing good happend, this error always here. I even spent 4 hrs to re-install vs2010, but still cannot solve this. If i need to re-install WIN7 for this , i will be crazy at all... How this happened? and how to overcome it? Thanks for your time..

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >