Search Results

Search found 11100 results on 444 pages for 'xt 20'.

Page 19/444 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Do spaces in your URL (%20) have a negative impact on SEO?

    - by Kevin
    All the articles I Googled on this subject are dated back in 2004-2005. Basically I am structuring precanned searches, and it is based off of categories the client will input. Example content/(term name)/index.htm Does it matter if I used the raw term with a space, which is converted to %20 in the URL, or should I convert the link to '-' and remove that before querying for results? I already have it working, but does anyone know if this definitely has a negative impact on SEO and ranking?

    Read the article

  • Ubuntu server has slow performance

    - by Rich
    I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

    Read the article

  • SQL SERVER – Solution – Puzzle – Statistics are not Updated but are Created Once

    - by pinaldave
    Earlier I asked puzzle why statistics are not updated. Read the complete details over here: Statistics are not Updated but are Created Once In the question I have demonstrated even though statistics should have been updated after lots of insert in the table are not updated.(Read the details SQL SERVER – When are Statistics Updated – What triggers Statistics to Update) In this example I have created following situation: Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Auto Update Statistics and Auto Create Statistics for database is TRUE Now I have requested two things in the example 1) Why this is happening? 2) How to fix this issue? I have many answers – here is the how I fixed it which has resolved the issue for me. NOTE: There are multiple answers to this problem and I will do my best to list all. Solution: Create nonclustered Index on column City Here is the working example for the same. Let us understand this script and there is added explanation at the end. -- Execution Plans Difference -- Estimated Execution Plan Vs Actual Execution Plan -- Create Sample Database CREATE DATABASE SampleDB GO USE SampleDB GO -- Create Table CREATE TABLE ExecTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO CREATE NONCLUSTERED INDEX IX_ExecTable1 ON ExecTable (City); GO -- Insert One Thousand Records -- INSERT 1 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 1000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here DBCC SHOW_STATISTICS('ExecTable', IX_ExecTable1); GO -------------------------------------------------------------- -- Round 2 -- Insert One Thousand Records -- INSERT 2 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 1000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here DBCC SHOW_STATISTICS('ExecTable', IX_ExecTable1); GO -- Clean up Database DROP TABLE ExecTable GO When I created non clustered index on the column city, it also created statistics on the same column with same name as index. When we populate the data in the column the index is update – resulting execution plan to be invalided – this leads to the statistics to be updated in next execution of SELECT. This behavior does not happen on Heap or column where index is auto created. If you explicitly update the index, often you can see the statistics are updated as well. You can see this is for sure happening if you follow the tell of John Sansom. John Sansom‘s suggestion: That was fun! Although the column statistics are invalidated by the time the second select statement is executed, the query is not compiled/recompiled but instead the existing query plan is reused. It is the “next” compiled query against the column statistics that will see that they are out of date and will then in turn instantiate the action of updating statistics. You can see this in action by forcing the second statement to recompile. SELECT FirstName, LastName, City FROM ExecTable WHERE City = ‘New York’ option(RECOMPILE) GO Kevin Cross also have another suggestion: I agree with John. It is reusing the Execution Plan. Aside from OPTION(RECOMPILE), clearing the Execution Plan Cache before the subsequent tests will also work. i.e., run this before round 2: ————————————————————– – Clear execution plan cache before next test DBCC FREEPROCCACHE WITH NO_INFOMSGS; ————————————————————– Nice puzzle! Kevin As this was puzzle John and Kevin both got the correct answer, there was no condition for answer to be part of best practices. I know John and he is finest DBA around – his tremendous knowledge has always impressed me. John and Kevin both will agree that clearing cache either using DBCC FREEPROCCACHE and recompiling each query every time is for sure not good advice on production server. It is correct answer but not best practice. By the way, if you have better solution or have better suggestion please advise. I am open to change my answer and publish further improvement to this solution. On very separate note, I like to have clustered index on my Primary Key, which I have not mentioned here as it is out of the scope of this puzzle. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Index, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Statistics

    Read the article

  • Oracle pl\sql question for my homework in oracle 11G class [migrated]

    - by Bjolds
    I am new to oracle 11G programming and i have run into a tough situation with pl\sql funtions and automation. I ame unsure how to create the function for the automation of Registration system for a College registration system. Here is what i want to do. I want to automate the registrations system so that it automaticly registers students. Then I want a procedure to automate the grading system. I have included the code that i am written to make most of this assignment work which it does but unsure how to incorporate Pl\SQL automated fuctions for the registrations system, and the grading system. So Any help or Ideas I would greatly appreciate please. set Linesize 250 set pagesize 150 drop table student; drop table faculty; drop table Course; drop table Section; drop table location; DROP TABLE courseInstructor; DROP TABLE Registration; DROP TABLE grade; create table student( studentid number(10), Lastname varchar2(20), Firstname Varchar2(20), MI Char(1), address Varchar2(20), city Varchar2(20), state Char(2), zip Varchar2(10), HomePhone Varchar2(10), Workphone Varchar2(10), DOB Date, Pin VARCHAR2(10), Status Char(1)); ALTER TABLE Student Add Constraint Student_StudentID_pk Primary Key (studentID); Insert into student values (1,'xxxxxxxx','xxxxxxxxxx','x','xxxxxxxxxxxxxxx','Columbus','oh','44159','xxx-xxx-xxxx','xxx-xxx-xxxx','06-Mar-1957','1211','c'); create table faculty( FacultyID Number(10), FirstName Varchar2(20), Lastname Varchar2(20), MI Char(1), workphone Varchar2(10), CellPhone Varchar2(10), Rank Varchar2(20), Experience Varchar2(10), Status Char(1)); ALTER TABLE Faculty ADD Constraint Faculty_facultyId_PK PRIMARY KEY (FacultyID); insert into faculty values (1,'xxx','xxxxxxxxxxxx',xxx-xxx-xxxx','xxx-xxx-xxxx','professor','20','f'); create table Course( CourseId number(10), CourseNumber Varchar2(20), CourseName Varchar(20), Description Varchar(20), CreditHours Number(4), Status Char(1)); ALTER TABLE Course ADD Constraint Course_CourseID_pk PRIMARY KEY(CourseID); insert into course values (1,'cit 100','computer concepts','introduction to PCs','3.0','o'); insert into course values (2,'cit 101','Database Program','Database Programming','4.0','o'); insert into course values (3,'Math 101','Algebra I','Algebra I Concepts','5.0','o'); insert into course values (4,'cit 102a','Pc applications','Aplications 1','3.0','o'); insert into course values (5,'cit 102b','pc applications','applications 2','3.0','o'); insert into course values (6,'cit 102c','pc applications','applications 3','3.0','o'); insert into course values (7,'cit 103','computer concepts','introduction systems','3.0','c'); insert into course values (8,'cit 110','Unified language','UML design','3.0','o'); insert into course values (9,'cit 165','cobol','cobol programming','3.0','o'); insert into course values (10,'cit 167','C++ Programming 1','c++ programming','4.0','o'); insert into course values (11,'cit 231','Expert Excel','spreadsheet apps','3.0','o'); insert into course values (12,'cit 233','expert Access','database devel.','3.0','o'); insert into course values (13,'cit 169','Java Programming I','Java Programming I','3.0','o'); insert into course values (14,'cit 263','Visual Basic','Visual Basic Prog','3.0','o'); insert into course values (15,'cit 275','system analysis 2','System Analysis 2','3.0','o'); create table Section( SectionID Number(10), CourseId Number(10), SectionNumber VarChar2(10), Days Varchar2(10), StartTime Date, EndTime Date, LocationID Number(10), SeatAvailable Number(3), Status Char(1)); ALTER TABLE Section ADD Constraint Section_SectionID_PK PRIMARY KEY(SectionID); insert into section values (1,1,'18977','r','21-Sep-2011','10-Dec-2011','1','89','o'); create table Location( LocationId Number(10), Building Varchar2(20), Room Varchar2(5), Capacity Number(5), Satus Char(1)); ALTER TABLE Location ADD Constraint Location_LocationID_pk PRIMARY KEY (LocationID); insert into Location values (1,'Clevleand Hall','cl209','35','o'); insert into Location values (2,'Toledo Circle','tc211','45','o'); insert into Location values (3,'Akron Square','as154','65','o'); insert into Location values (4,'Cincy Hall','ch100','45','o'); insert into Location values (5,'Springfield Dome','SD','35','o'); insert into Location values (6,'Dayton Dorm','dd225','25','o'); insert into Location values (7,'Columbus Hall','CB354','15','o'); insert into Location values (8,'Cleveland Hall','cl204','85','o'); insert into Location values (9,'Toledo Circle','tc103','75','o'); insert into Location values (10,'Akron Square','as201','46','o'); insert into Location values (11,'Cincy Hall','ch301','73','o'); insert into Location values (12,'Dayton Dorm','dd245','57','o'); insert into Location values (13,'Springfield Dome','SD','65','o'); insert into Location values (14,'Cleveland Hall','cl241','10','o'); insert into Location values (15,'Toledo Circle','tc211','27','o'); insert into Location values (16,'Akron Square','as311','28','o'); insert into Location values (17,'Cincy Hall','ch415','73','o'); insert into Location values (18,'Toledo Circle','tc111','67','o'); insert into Location values (19,'Springfield Dome','SD','69','o'); insert into Location values (20,'Dayton Dorm','dd211','45','o'); Alter Table Student Add Constraint student_Zip_CK Check(Rtrim (Zip,'1234567890-') is null); Alter Table Student ADD Constraint Student_Status_CK Check(Status In('c','t')); Alter Table Student ADD Constraint Student_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Alter Table Student Modify pin not Null; Alter table Faculty Add Constraint Faculty_Status_CK Check(Status In('f','a','i')); Alter table Faculty ADD Constraint Faculty_Rank_CK Check(Rank In ('professor','doctor','instructor','assistant','tenure')); Alter table Faculty ADD Constraint Faculty_MI_CK2 Check(RTRIM(MI,'abcdefghijklmnopqrstuvwxyz')is Null); Update Section Set Starttime = To_date('09-21-2011 6:00 PM', 'mm-dd-yyyy hh:mi pm'); Update Section Set Endtime = To_date('12-10-2011 9:50 PM', 'mm-dd-yyyy hh:mi pm'); alter table Section Add Constraint StartTime_Status_CK Check (starttime < Endtime); Alter Table Section Add Constraint Section_StartTime_ck check (StartTime < EndTime); Alter Table Section ADD Constraint Section_CourseId_FK FOREIGN KEY (CourseID) References Course(CourseId); Alter Table Section ADD Constraint Section_LocationID_FK FOREIGN KEY (LocationID) References Location (LocationId); Alter Table Section ADD Constraint Section_Days_CK Check(RTRIM(Days,'mtwrfsu')IS Null); update section set seatavailable = '99'; Alter Table Section ADD Constraint Section_SeatsAvailable_CK Check (SeatAvailable < 100); Alter Table Course Add Constraint Course_CreditHours_ck check(CreditHours < = 6.0); update location set capacity = '99'; Alter Table Location Add Constraint Location_Capacity_CK Check(Capacity < 100); Create Table Registration ( StudentID Number(10), SectionID Number(10), Constraint Registration_pk Primary key (studentId, Sectionid)); Insert into registration values (1, 2); Insert into Registration values (2, 3); Insert into registration values (3, 4); Insert into registration values (4, 5); Insert into registration values (5, 6); Insert into registration values (6, 7); Insert into registration values (7, 8); Insert into registration values (8, 9); insert into registration values (9, 10); insert into registration values (10, 11); insert into registration values (9, 12); insert into registration values (8, 13); insert into registration values (7, 14); insert into registration values (6, 15); insert into registration values (5, 17); insert into registration values (4, 18); insert into registration values (3, 19); insert into registration values (2, 20); insert into registration values (1, 21); insert into registration values (2, 22); insert into registration values (3, 23); insert into registration values (4, 24); insert into registration values (5, 25); Insert into registration values (6, 24); insert into registration values (7, 23); insert into registration values (8, 22); insert into registration values (9, 21); insert into registration values (10, 20); insert into registration values (9, 19); insert into registration values (8, 17); Create Table courseInstructor( FacultyID Number(10), SectionID Number(10), Constraint CourseInstructor_pk Primary key (FacultyId, SectionID)); insert into courseInstructor values (1, 1); insert into courseInstructor values (2, 2); insert into courseInstructor values (3, 3); insert into courseInstructor values (4, 4); insert into courseInstructor values (5, 5); insert into courseInstructor values (5, 6); insert into courseInstructor values (4, 7); insert into courseInstructor values (3, 8); insert into courseInstructor values (2, 9); insert into courseInstructor values (1, 10); insert into courseInstructor values (5, 11); insert into courseInstructor values (4, 12); insert into courseInstructor values (3, 13); insert into courseInstructor values (2, 14); insert into courseInstructor values (1, 15); Create table grade( StudentID Number(10), SectionID Number(10), Grade Varchar2(1), Constraint grade_pk Primary key (StudentID, SectionID)); CREATE OR REPLACE TRIGGER TR_CreateGrade AFTER INSERT ON Registration FOR EACH ROW BEGIN INSERT INTO grade (SectionID,StudentID,Grade) VALUES(:New.SectionID,:New.StudentID,NULL); END TR_createGrade; / CREATE OR REPLACE FORCE VIEW V_reg_student_course AS SELECT Registration.StudentID, student.LastName, student.FirstName, course.CourseName, Registration.SectionID, course.CreditHours, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM registration, student, section, course, location WHERE registration.StudentID = student.StudentID AND registration.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; CREATE OR REPLACE FORCE VIEW V_teacher_to_course AS SELECT courseInstructor.FacultyID, faculty.FirstName, faculty.LastName, courseInstructor.SectionID, section.Days, TO_CHAR(StartTime, 'MM/DD/YYYY') AS StartDate, TO_CHAR(StartTime, 'HH:MI PM') AS StartTime, TO_CHAR(EndTime, 'MM/DD/YYYY') AS EndDate, TO_CHAR(EndTime, 'HH:MI PM') AS EndTime, location.Building, location.Room FROM courseInstructor, faculty, section, course, location WHERE courseInstructor.FacultyID = faculty.FacultyID AND courseInstructor.SectionID = section.SectionID AND section.LocationID = location.LocationID AND section.CourseID = course.CourseID; SELECT * FROM V_reg_student_course; SELECT * FROM V_teacher_to_course;

    Read the article

  • Do Seagate Momentus XT SSD Hybrid drives perform better than a good hard drive + flash on ReadyBoost

    - by Chris W. Rea
    Seagate has released a product called the Momentus XT Solid State Hybrid Drive. At a glance, this looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

    Read the article

  • Tunnel is up but cannot ping directly connected network

    - by drmanalo
    We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

    Read the article

  • AMD 24 core server memory bandwidth

    - by ntherning
    I need some help to determine whether the memory bandwidth I'm seeing under Linux on my server is normal or not. Here's the server spec: HP ProLiant DL165 G7 2x AMD Opteron 6164 HE 12-Core 40 GB RAM (10 x 4GB DDR1333) Debian 6.0 Using mbw on this server I get the following numbers: foo1:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.58047 MiB: 1024.00000 Copy: 1764.082 MiB/s 1 Method: MEMCPY Elapsed: 0.58012 MiB: 1024.00000 Copy: 1765.152 MiB/s 2 Method: MEMCPY Elapsed: 0.58010 MiB: 1024.00000 Copy: 1765.201 MiB/s AVG Method: MEMCPY Elapsed: 0.58023 MiB: 1024.00000 Copy: 1764.811 MiB/s 0 Method: DUMB Elapsed: 0.36174 MiB: 1024.00000 Copy: 2830.778 MiB/s 1 Method: DUMB Elapsed: 0.35869 MiB: 1024.00000 Copy: 2854.817 MiB/s 2 Method: DUMB Elapsed: 0.35848 MiB: 1024.00000 Copy: 2856.481 MiB/s AVG Method: DUMB Elapsed: 0.35964 MiB: 1024.00000 Copy: 2847.310 MiB/s 0 Method: MCBLOCK Elapsed: 0.23546 MiB: 1024.00000 Copy: 4348.860 MiB/s 1 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.230 MiB/s 2 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.359 MiB/s AVG Method: MCBLOCK Elapsed: 0.23545 MiB: 1024.00000 Copy: 4349.149 MiB/s On one of my other servers (based on Intel Xeon E3-1270): foo2:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.18960 MiB: 1024.00000 Copy: 5400.901 MiB/s 1 Method: MEMCPY Elapsed: 0.18922 MiB: 1024.00000 Copy: 5411.690 MiB/s 2 Method: MEMCPY Elapsed: 0.18944 MiB: 1024.00000 Copy: 5405.491 MiB/s AVG Method: MEMCPY Elapsed: 0.18942 MiB: 1024.00000 Copy: 5406.024 MiB/s 0 Method: DUMB Elapsed: 0.14838 MiB: 1024.00000 Copy: 6901.200 MiB/s 1 Method: DUMB Elapsed: 0.14818 MiB: 1024.00000 Copy: 6910.561 MiB/s 2 Method: DUMB Elapsed: 0.14820 MiB: 1024.00000 Copy: 6909.628 MiB/s AVG Method: DUMB Elapsed: 0.14825 MiB: 1024.00000 Copy: 6907.127 MiB/s 0 Method: MCBLOCK Elapsed: 0.04362 MiB: 1024.00000 Copy: 23477.623 MiB/s 1 Method: MCBLOCK Elapsed: 0.04262 MiB: 1024.00000 Copy: 24025.151 MiB/s 2 Method: MCBLOCK Elapsed: 0.04258 MiB: 1024.00000 Copy: 24048.849 MiB/s AVG Method: MCBLOCK Elapsed: 0.04294 MiB: 1024.00000 Copy: 23847.599 MiB/s For reference here's what I get on my Intel based laptop: laptop:~$ mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.40566 MiB: 1024.00000 Copy: 2524.269 MiB/s 1 Method: MEMCPY Elapsed: 0.38458 MiB: 1024.00000 Copy: 2662.638 MiB/s 2 Method: MEMCPY Elapsed: 0.38876 MiB: 1024.00000 Copy: 2634.043 MiB/s AVG Method: MEMCPY Elapsed: 0.39300 MiB: 1024.00000 Copy: 2605.600 MiB/s 0 Method: DUMB Elapsed: 0.30707 MiB: 1024.00000 Copy: 3334.745 MiB/s 1 Method: DUMB Elapsed: 0.30425 MiB: 1024.00000 Copy: 3365.653 MiB/s 2 Method: DUMB Elapsed: 0.30342 MiB: 1024.00000 Copy: 3374.849 MiB/s AVG Method: DUMB Elapsed: 0.30491 MiB: 1024.00000 Copy: 3358.328 MiB/s 0 Method: MCBLOCK Elapsed: 0.07875 MiB: 1024.00000 Copy: 13003.670 MiB/s 1 Method: MCBLOCK Elapsed: 0.08374 MiB: 1024.00000 Copy: 12228.034 MiB/s 2 Method: MCBLOCK Elapsed: 0.07635 MiB: 1024.00000 Copy: 13411.216 MiB/s AVG Method: MCBLOCK Elapsed: 0.07961 MiB: 1024.00000 Copy: 12862.006 MiB/s So according to mbw my laptop is 3 times faster than the server!!! Please help me explain this. I've also tried to mount a ram disk and use dd to benchmark it and I get similar differences so I don't think mbw is to blame. I've checked the BIOS settings and the memory seem to be running at full speed. According to the hosting company the modules are all OK. Could this have something to do with NUMA? It seems like Node Interleaving is disabled on this server. Will enabling it (thus turning off NUMA) make a difference? foo1:~# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 node 0 size: 8190 MB node 0 free: 7898 MB node 1 cpus: 6 7 8 9 10 11 node 1 size: 12288 MB node 1 free: 12073 MB node 2 cpus: 18 19 20 21 22 23 node 2 size: 12288 MB node 2 free: 12034 MB node 3 cpus: 12 13 14 15 16 17 node 3 size: 8192 MB node 3 free: 8032 MB node distances: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 20 2: 20 20 10 20 3: 20 20 20 10

    Read the article

  • How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

    - by deryus
    A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

    Read the article

  • Career Day in kindergarten: how to demonstrate programming in 20 minutes?

    - by Péter Török
    I was invited to the kindergarten group of my elder daughter to talk, and aswer the kids' questions, about my profession. There are 26 kids of age 4-6 in the group (plus 3 teachers who are fairly scared of anything related to programming and IT themselves, but bold enough to learn new tricks). I would have about 20-30 minutes, without projector or anything. (They have an old computer though, which by its look may be a 486, and I am not even sure if it's functioning.) My research turned up excellent earlier threads, with lots of good tips: How would you explain your job to a 5-year old? Career Day: how do I make “computer programmer” sound cool to 8 year olds? What things can I teach a group of children about programming in one day? My situation is different from each of the above though. So any advice on how to teach the kids (and their teachers) in a fun way about programming is appreciated.

    Read the article

  • Why are Views loaded from nibs being placed 20 pixels down from the status bar?

    - by rickharrison
    I am trying to set up a layout as such in an iPad application. It will have three major views, which make up the whole screen. The views will be stacked one on top of the other, each taking up the full width. I have one major nib file which accounts for the entire screen space. In that nib file, I am instantiating the three view controllers with outlets. Then I have this code: - (void)viewDidLoad { [super viewDidLoad]; [self.view addSubview:controllerOne.view]; [self.view addSubview:controllerTwo.view]; [self.view addSubview:controllerThree.view]; } This adds the views on top of one another and 20 pixels lower. However, after rotating to landscape and back they are right under the status bar. Do you know what would be causing this?

    Read the article

  • MS Access vs SQL Server and others ? Is it worth taking a db server when less than 2 Gb and only 20

    - by asksuperuser
    After my experiment with MSAccess vs MySQL which shows MS Access hugely overperforming Mysql odbc insert by a factor 1000% before I would do the same experiment with SQL Server I searched for some other's people and found this one: http://blog.nkadesign.com/2009/access-vs-sql-server-some-stats-part-1/ which says "As a side note, in this particular test, Access offers much better raw performance than SQL Server. In more complex scenarios it’s very likely that Access’ performance would degrade more than SQL Server, but it’s nice to see that Access isn’t a sloth." So is worth bother with some db server when data is less than 2 Gb and users are about 20 (knowing that MS Access theorically supports up to 255 concurrent users though practically it's around a dozen concurrent users only). Are there any real world studies that really compare MS Access with other db in these specific use case ? Because professionaly speaking I keep hearing people systematically recommend DB server from people who have never used Access just because they think DB Server can only perform better in every case which I used to think myself I confess.

    Read the article

  • Displaying only the similarities between 20 or so files?

    - by leeand00
    Say I've got a directory full of html pages. Their headers and footers are basically the same, but I want to be able to see only the portions of all the pages that are the same. I'd like to call it an n-way merge, but that isn't what it is, it's looking for just the similarities between the header and the footers of all the files. (and my header I don't mean just the <head> tag, but rather the portions of the page that are alike). Note: There are like 20 html files. Is there a name for a tool that does this?

    Read the article

  • Error in Bind9 named.conf file. Bind won't start.

    - by tj111
    I'm trying to setup a DNS server on an Ubuntu Server machine (10.04). I configured an entry in named.conf.local to test it, but when trying to restart bind9 I get the following error: * Starting domain name service... bind9 [fail] So I checked the output of syslog and this is what I get. May 20 18:11:13 empression-server1 named[4700]: starting BIND 9.7.0-P1 -u bind May 20 18:11:13 empression-server1 named[4700]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' May 20 18:11:13 empression-server1 named[4700]: adjusted limit on open files from 1024 to 1048576 May 20 18:11:13 empression-server1 named[4700]: found 4 CPUs, using 4 worker threads May 20 18:11:13 empression-server1 named[4700]: using up to 4096 sockets May 20 18:11:13 empression-server1 named[4700]: loading configuration from '/etc/bind/named.conf' May 20 18:11:13 empression-server1 named[4700]: /etc/bind/named.conf:10: missing ';' before 'include' May 20 18:11:13 empression-server1 named[4700]: loading configuration: failure May 20 18:11:13 empression-server1 named[4700]: exiting (due to fatal error) So it thinks I have an error in the default named.conf file, which is pretty ridiculous. I went through it and deleted a blank line just for the hell of it, but I can't see how it figures there's an error in there. Note that before this I did have an error in named.conf.local, but it showed up properly in syslog and I fixed it, so it is reporting the correct file. Here is the contents of named.conf: // This is the primary configuration file for the BIND DNS server named. // // Please read /usr/share/doc/bind9/README.Debian.gz for information on the // structure of BIND configuration files in Debian, *BEFORE* you customize // this configuration file. // // If you are just adding zones, please do that in /etc/bind/named.conf.local include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones";

    Read the article

  • Apache process consumes too much CPU

    - by Niro
    I have an ubuntu apache/php server running php doing appx 100 hits/sec and a PHP cron running in the background. I get occasionally high CPU load on one of the Apache processes which stays high regardless of traffic or cron activity. It seems to me that its stuck in some kind of loop or something. Below you will find the top and strace info. How can I find where the bad code is and what causes this? top - 14:45:24 up 3 days, 3:38, 1 user, load average: 5.10, 5.88, 5.85 Tasks: 163 total, 5 running, 158 sleeping, 0 stopped, 0 zombie Cpu(s): 47.8%us, 18.5%sy, 0.0%ni, 10.2%id, 0.0%wa, 0.0%hi, 1.8%si, 21.6%st Mem: 7885012k total, 3858484k used, 4026528k free, 177444k buffers Swap: 0k total, 0k used, 0k free, 1037868k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10736 www-data 20 0 769m 559m 478m R 69 7.3 29:08.30 apache2 10844 www-data 20 0 824m 601m 492m S 17 7.8 4:37.90 apache2 1016 root 20 0 242m 25m 4628 S 6 0.3 162:07.93 scalarizr 9030 www-data 20 0 879m 619m 492m S 4 8.0 5:06.82 apache2 20216 www-data 20 0 747m 228m 170m S 4 3.0 0:01.94 apache2 10807 www-data 20 0 814m 584m 492m S 3 7.6 4:54.10 apache2 10455 www-data 20 0 831m 574m 492m S 3 7.5 4:32.65 apache2 10495 www-data 20 0 849m 592m 492m S 3 7.7 4:41.10 apache2 10884 www-data 20 0 840m 581m 492m S 3 7.6 4:25.06 apache2 ^CProcess 10736 detached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 74.55 0.148052 1 109755 gettimeofday 25.36 0.050370 0 164634 clock_gettime 0.09 0.000178 0 54878 poll ------ ----------- ----------- --------- --------- ---------------- 100.00 0.198600 329267 total root@ec2-67-202-54-36:~# ^C

    Read the article

  • Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

    - by David Bullock
    So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

    Read the article

  • Mounted NFS directory not writable by Apache / PHP

    - by phpfour
    Need some help here with NFS. Here's what I have (all servers running CentOS 5.6 with SELinux): 172.17.20.1 - Primary server with static IP. Varnish redirects requests to the web servers. 172.17.20.2 - Web server 1 172.17.20.3 - Web server 2 The application residing on the web servers is running Drupal and I need both of them to share the same files directory. I have created a folder in 172.17.20.1 called /var/nfs with root user. Here is my /etc/exports content: /var/nfs 172.17.20.2(rw,sync,no_root_squash) 172.17.20.3(rw,sync,no_root_squash) On both the web servers (172.17.20.2/3), I have it mounted like below: [root@web2 ~]# mount ... 172.17.20.1:/var/nfs on /mnt/nfs/var/nfs type nfs (rw,sync,hard,intr,addr=172.17.20.1) On all the servers, I've added the user apache to the root group to get the desired write access: [root@main ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: [root@web1 ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: Despite all this, when I try to write files into the /mnt/nfs/var/nfs folder from Drupal/PHP, it cannot write to it. I even tried with a simple PHP upload script but it doesn't work, so the problem is not with Drupal. Any help you guys can do is much appreciated. I've spent hours and hours with it, without any success :( Thanks in advance.

    Read the article

  • VMWare player - compiling server modules - Ubuntu 13.10

    - by user211976
    While running Ubuntu 13.04 whenever the Linux kernel had been updated, this used to make vmware player happy: sudo apt-get install linux-headers-$(uname -r) sudo vmware-modconfig --console --install-all Yesterday I upgraded to Ubuntu 13.10 and lo and behold, the above workaround does not work anymore: Unable to install all modules. See log for details. I assume by "See log" it means the files in /tmp/vmware-root/*log root@hugin:/tmp/vmware-root# ls -ltr /tmp/vmware-root/ totalt 16 -rw-r--r-- 1 root root 3815 nov 6 13:54 vmware-apploader-17267.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-17693.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-17742.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-18701.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-18750.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-19100.log -rw-r--r-- 1 root root 0 nov 6 13:54 vmware-vmis-19149.log -rw-r--r-- 1 root root 9250 nov 6 13:54 vmware-modconfig-17267.log root@hugin:/tmp/vmware-root# tail /tmp/vmware-root/vmware-modconfig-17267.log 2013-11-06T13:54:28.950+01:00| modconfig| I120: Copied Module.symvers from "/tmp/modconfig-wpDrtf/vmci-only/Module.symvers" to "/tmp/modconfig-wpDrtf/vsock-only/Module.symvers". 2013-11-06T13:54:28.950+01:00| modconfig| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-wpDrtf/vsock-only auto-build HEADER_DIR=/lib/modules/3.11.0-12-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no" 2013-11-06T13:54:31.048+01:00| modconfig| I120: Successfully built vsock. Module is currently at "/tmp/modconfig-wpDrtf/vsock.o". 2013-11-06T13:54:31.048+01:00| modconfig| I120: Found the vsock symvers file at "/tmp/modconfig-wpDrtf/vsock-only/Module.symvers". 2013-11-06T13:54:31.048+01:00| modconfig| I120: Installing vsock from /tmp/modconfig-wpDrtf/vsock.o to /lib/modules/3.11.0-12-generic/misc/vsock.ko. 2013-11-06T13:54:31.048+01:00| modconfig| I120: Registering file "/lib/modules/3.11.0-12-generic/misc/vsock.ko". 2013-11-06T13:54:31.400+01:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0. 2013-11-06T13:54:31.400+01:00| modconfig| I120: Registering file "/usr/lib/vmware/symvers/vsock-3.11.0-12-generic". 2013-11-06T13:54:31.764+01:00| modconfig| I120: "/usr/lib/vmware-installer/2.1.0vmware-installer" exited with status 0. 2013-11-06T13:54:31.786+01:00| modconfig| I120: We are now shutdown. Ready to die! root@hugin:/tmp/vmware-root# tail /tmp/vmware-root/vmware-apploader-17267.log 2013-11-06T13:54:20.911+01:00| appLoader| I120: libglib-2.0.so.0 <SYSTEM> 2013-11-06T13:54:20.911+01:00| appLoader| I120: libz.so.1 <SYSTEM> 2013-11-06T13:54:20.911+01:00| appLoader| I120: libvmware-modconfig-console.so <SHIPPED> 2013-11-06T13:54:20.912+01:00| appLoader| I120: Shipped glib version is 2.24 2013-11-06T13:54:20.912+01:00| appLoader| I120: System glib version is 2.38 2013-11-06T13:54:20.912+01:00| appLoader| I120: Using system version of glib. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libgcc_s.so.1. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libglib-2.0.so.0. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading system version of libz.so.1. 2013-11-06T13:54:20.912+01:00| appLoader| I120: Loading shipped version of libxml2.so.2.

    Read the article

  • nikto probe warning messages

    - by julio
    Hi-- I have a pretty standard VPS running Ubuntu 8.1, Apache 2.2, PHP 5 etc. -- standard Lamp stack. I am using suhosin and have tried my best to plug the obvious stuff, since I'm the only user-- there's no SSH access except via pubkey on a non-standard port, there's no root access by SSH, no FTP server running, iptables is set to discard anything outside of basically port 80 or my SSH port (there's no mail server or anything else). However, I've still been compromised (not badly as far as I can tell) probably by a SQL injection. I've locked down the SQL user (there's only one outside of root, and he's got limited priv, no file etc.) So I ran nikto to see what I'm doing wrong, and there's a list of things I've never seen, and can't find using "find" or any other method I'm aware of. See below: + /autologon.html?10514: Remotely Anywhere 5.10.415 is vulnerable to XSS attacks that can lead to cookie theft or privilege escalation. This is typically found on port 2000. + /servlet/webacc?User.html=noexist: Netware web access may reveal full path of the web server. Apply vendor patch or upgrade. + OSVDB-35878: /modules.php?name=Members_List&letter='%20OR%20pass%20LIKE%20'a%25'/*: PHP Nuke module allows user names and passwords to be viewed. + OSVDB-3092: /sitemap.xml: This gives a nice listing of the site content. + OSVDB-12184: /index.php?=PHPB8B5F2A0-3C92-11d3-A3A9-4C7B08C10000: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F36-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-3092: /administrator/: This might be interesting... + OSVDB-3092: /Agent/: This might be interesting... + OSVDB-3092: /includes/: This might be interesting... + OSVDB-3092: /logs/: This might be interesting... + OSVDB-3092: /tmp/: This might be interesting... + ERROR: /servlet/Counter returned an error: error reading HTTP response + OSVDB-3268: /icons/: Directory indexing is enabled: /icons + OSVDB-3268: /images/: Directory indexing is enabled: /images + OSVDB-3299: /forumscalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /forumzcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /htforumcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbulletincalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-6659: /kCKAowoWuZkKCUPH7Mr675ILd9hFg1lnyc1tWUuEbkYkFCpCdEnCKkkd9L0bY34tIf9l6t2owkUp9nI5PIDmQzMokDbp71QFTZGxdnZhTUIzxVrQhVgwmPYsMK7g34DURzeiy3nyd4ezX5NtUozTGqMkxDrLheQmx4dDYlRx0vKaX41JX40GEMf21TKWxHAZSUxjgXUnIlKav58GZQ5LNAwSAn13l0w<font%20size=50>DEFACED<!--//--: MyWebServer 1.0.2 is vulnerable to HTML injection. Upgrade to a later version. I understand about the trace and index, but what about the vbulletin and autologin? I've searched, and I can't find any files like that on the server. I have no idea about the "MyWebServer" stuff, the PHP Nuke, or the Netware/servlet stuff-- there's nothing really on the server except a pretty standard Joomla site (updated to the latest version). Any help with these messages and/or what I'm doing wrong is very much appreciated.

    Read the article

  • Is there an algorithm for finding an item that matches certain properties, like a 20 questions game?

    - by lala
    A question about 20 questions games was asked here: However, if I'm understanding it correctly, the answers seem to assume that each question will go down a hierarchal branching tree. A binary tree should work if the game went like this: Is it an animal? Yes. Is it a mammal? Yes. Is it a feline? Yes. Because feline is an example of a mammal and mammal is an example of an animal. But what if the questions go like this? Is it a mammal? Yes. Is it a predator? Yes. Does it have a long nose? No. You can't branch down a tree with those kinds of questions, because there are plenty of predators that aren't mammals. So you can't have your program just narrow it down to mammal and have predators be a subset of mammals. So is there a way to use a binary search tree that I'm not understanding or is there a different algorithm for this problem?

    Read the article

  • What 20 Lines (or less) of code did you find really useful?

    - by Ygam
    You can share your code or other's code. Here's a snippet from an array function in Kohana: public static function rotate($source_array, $keep_keys = TRUE) { $new_array = array(); foreach ($source_array as $key => $value) { $value = ($keep_keys === TRUE) ? $value : array_values($value); foreach ($value as $k => $v) { $new_array[$k][$key] = $v; } } return $new_array; } It was helpful when I was uploading multiple images using multiple file upload forms. It turned this array array('images' => array( 'name' => array( 0 => 'img1', 1 => 'img0', 2 =>'img2' ), 'error' => array( 0 => '', 1 => '', 2 => '' into : array('images' => array( 0 => array( 'name' => 'img1' 'error' => '' ),//rest goes here How about you? What 20 or less lines of code did you find useful?

    Read the article

  • Any way to loop through FPDF code with proper XY coordinates?

    - by JM4
    At the end of a form collection, I provide the consumer a printable PDF with the information they just entered. I already run through a loop to store the variables themselves but am wondering if it is at all possible to build a loop that builds on itself for FPDF. The catch is this, each new variable (#1, #2, #3) will change location by a determined amount of space. For example: I print the Member #1 First name at coordinate at coordinate (95, 101). I print Member #2 First name at coordinate (95, 110)... and so on. Each known variable will be 9.5mm greater than its previous entry (therefor Member #9 will be 40mm higher than Member 6) My sample code for the FPDF itself is: $pdf->SetFont('Arial','', 7); $pdf->SetXY(8,76.5); $pdf->Cell(20,0,$f1name); $pdf->SetFont('Arial','', 5); $pdf->SetXY(50.5,76.5); $pdf->Cell(20,0,$f1address); $pdf->SetFont('Arial','', 7); $pdf->SetXY(95.7,76.5); $pdf->Cell(20,0,$f1city); $pdf->SetXY(129.5,76.5); $pdf->Cell(20,0,$f1state); $pdf->SetXY(139.1,76.5); $pdf->Cell(20,0,$f1zip); $pdf->SetXY(151,76.5); $pdf->Cell(20,0,$f1dob); $pdf->SetXY(168,76.5); $pdf->Cell(20,0,$f1ssn); $pdf->SetXY(186,76.5); $pdf->Cell(20,0,$f1phone); $pdf->SetXY(55,81.1); $pdf->Cell(20,0,$f1email); $pdf->SetXY(129,81.1); $pdf->Cell(20,0,$f1fednum); Ideally, all Y variables with $f2 would be 9.5mm greater than f1's Y values.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >