custom installer - Page 190

How to fix Truecrypt MBR using Command Prompt or Linux live USB?

- by Michal Stefanow

I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

Read the article

Drupal vs ExpressionEngine for any kind of project from simple commercial site to complex ecommerce

- by artmania

Hi friends... So far I've been using custom cms. lately I developed own cms with CodeIgniter, and I'm actually happy. But recently I take more design and front-end development works than deep development projects. I actually also prefer so... I have many things to do with custom cms, also some security issues, etc. I'm kind of tired of doing everyhing custom, also I want to give more time to my family... Recently I'm seriously considering to go for a ready cms, and develop custom plugins when project need sth specific. This cms should be very flexible to implement any layout. also secured (since i had some hack problems with my custom cms!) I googled so much about this. As a result 2 options: Drupal Expression Engine opensource or licensed matter is not an issue for me at all. I just consider to go for a cms that I can use for any kind of project from simple 4-5 pages company sites to complicated projects like hotels directory, ecommerce portals, etc... As I found out; EE is more userfriendly and doesnt hassle about implementing custom layout as much as Drupal does. Also EE use CodeIgniter that I'm familiar. on the other hand I found out that Drupal is 10000% flexible, we can do anything with that (requires good php knowledge), extremely powerful and has many plugins... So I can't decide!! I want to go for a cms that I will use for looooong years from now on with no problems to implement any kind of project. So which one do you recommend? Appreciate your helps! thanks a lot... Edited: http://expressionengine.com/ee2_sneak_preview/#cost this Commercial License $299.95 is for 1 setup? So I need to purchase new licence for each project? Nothing like I pay once, and use the cms for as many project as I want?

Read the article

Two Linked CSS Files Not working

- by Oscar Godson

<head> <title>Water Bureau</title> <link rel="shortcut icon" href="/favicon.ico" /> <link rel="stylesheet" href="/css/main.css" type="text/css" media="screen" title="Main CSS"> <link rel="stylesheet" href="custom.css" type="text/css" media="screen" title="Custom Styles"> <script language="JavaScript" src="/shared/js/createWin.js" type="text/javascript"></script> </head> Thats the code, but the "custom.css" isn't working. It doesn't work at all. If we add a @import into main.css OR into the header instead of a it works fine though. Any ideas? We also got rid of the media="screens" on both as well. The CSS inside of it is working fine, it's just when we stack those two, the first one parsed is the only one read by the browser. So if we swap main below custom, custom than works but NONE of main works. and custom just has snippet of CSS, and doesn't override all the CSS in main, just 1 element. I can't figure it out! We have other ed stylesheets in the head (which we took out for trying to fix this) and they worked fine...

Read the article

WCF Message Debugging on WebHttpBehavior

- by Programming Hero

I've created a custom binding in WCF for a custom MessageEncoder to allow messages to be written as XML using a wider range of encodings than WCF supports out of the box. The encoder appears to be working and I am able to send and receive messages, but I want to verify that the XML message being written is exactly as required by the service I am trying to consume. I've turned on message logging for WCF using the diagnostic trace listeners to output the messages sent and received over the wire to a log file. Unfortunately, for calls using my encoder, the message is displayed as ... stream ... EDIT: I don't think it's anything to do with my custom encoding. I have experimented with my custom binding a little, switching to using the built-in text encoding and http transport. I still don't get a message body logged in the message trace. EDIT2: Having done further investigation, the issue looks to be related not to the custom binding, but the custom behaviour. I'm apply the <webHttp/> behaviour. Once this is specified (along with manual addressing), the tracing behaviour shows up. Is this a known issue with WebHttpBehavior? Am I still barking up the wrong tree?

Read the article

Android - need UI help/advice

- by Donal Rafferty

I have been working on Android for the past couple of months getting to know how various components work. One area I am completely lacking in knowledge is any sort of User Interface or graphical interface creation. As an excercise I have been asked to break down the HTC call screen into what components it contains and rebuild as close as possible. Here is a picture of the HTC call screen: From my understanding the above UI has a custom title bar where "Meteor" and the call time appears. Then the main image in the middle block along with a text view showing the called party, in this case "Voice Mail" and the number. The bottom is then a custom view maybe with three custom buttons used within it. Would I be correct in my above assumptions? So the parts I should look into start programming are a custom title bar and a custom view with three custom buttons to place at the bottom? What layout would be reccomended? I hope this question is seen as relative to Stack Overflow, if it is not then I will delete it. Thanks in advance

Read the article

Downloading jQuery UI: Ok, so what part of this mess do I copy to the server?

- by Martha

From the "should be simple, but..." files: Trying to get started with jQuery UI. Went to the site, used their custom builder thingy to assemble the parts I need, made myself a custom theme using the Theme Roller, downloaded the zip file thus produced, unzipped it on my local drive. Ok, so I have 37 folders, 311 files, and a total of 2.4 MB. Ain't no way in hell all this is going on the server. What parts do I need to put there? 'css' 'custom-theme': jquery-ui-1.8.custom.css, 'images' subfolder with 12 .png images 'development-bundle' 'demos': demos.css, index.html, plus 18 subfolders, but I'm guessing "not needed" 'docs': 17 .html files, but again, I'm guessing "not needed" 'external': 4 .js files, one .css 'themes': 'base' and 'custom-theme' subfolders, each with 8 or 9 .css files and an 'images' subfolder with about a dozen images 'ui': 25 .js files, an 'i18n' subfolder with 53 .js files, and a 'minified' subfolder with 24 .js files 'js': jquery-1.4.2.min.js and jquery-ui-1.8.custom.min.js Also, the file structure. Our server is set up something like this: root admin (administrative tools) css forms (the gist of the site lives here) images include (asp code snippets that are used by multiple pages) js (just a few things right now, like an ancient wheezing spelling checker) As far as I can tell, the jQuery css files assume that (1) each theme is in its own folder, and (2) each folder has its own images subfolder. How can I convince it otherwise? i.e. put the necessary .js files in the 'js' folder, the .css files in the 'css' folder, and the images in the 'images' folder?

Read the article

IMAP protocol support in different email servers

- by raticulin

Having to interact with several different email servers via IMAP (using javamail), I have found that there is a very different level of support for IMAP features among them. The lack of support of some features has resulted in more developing time, more complicated code to deal with different support, worse perforamance due to not being able to SEARCH etc. So I would like to get some info on other servers and what level of support they provide. So far I have dealt with Lotus Domino and Novell GroupWise (and to a lesser extend Exchange 2003 and 2007). I am particularly interested in most used one in unix/linux (Courier, Cyrus, Dovecot, UW IMAP) and also Zimbra, but feel free to add any you know. Also welcomed info about online services like gmail. Features that I consider (comment if you are interested in others and I'll add them. Custom flags Searching Custom flags Searching arbitrary headers Partial fetching Proxy authentication And what I have found so far (correct if I am wrong anywhere): Lotus Domino Custom flags yes Searching Custom flags yes Searching arbitrary headers yes Partial fetching ? Proxy authentication sort of, you can give some user permissions to access other users mailboxes and he will see them under his '\Other Users' folder Novell GroupWise Custom flags No Searching Custom flags No Searching arbitrary headers No Partial fetching ? Proxy authentication yes, you can use what is called a Trusted Application

Read the article

How do you deserialize a collection with child collections?

- by Stuart Helwig

I have a collection of custom entity objects one property of which is an ArrayList of byte arrays. The custom entity is serializable and the collection property is marked with the following attributes: [XmlArray("Images"), XmlArrayItem("Image",typeof(byte[]))] So I serialize a collection of these custom entities and pass them to a web service, as a string. The web service receives the string and byte array in tact, The following code then attempts to deserialize the collection - back into custom entities for processing... XmlSerializer ser = new XmlSerializer(typeof(List<myCustomEntity>)); StringReader reader = new StringReader(xmlStringPassedToWS); List<myCustomEntity> entities = (List<myCustomEntity>)ser.Deserialize(reader); foreach (myCustomEntity e in entities) { // ...do some stuff... foreach (myChildCollection c in entities.ChildCollection { // .. do some more stuff.... } } I've checked the XML resulting from the initial serialization and it does contain byte array - the child collection, as does the StringReader built above. After the deserialization process, the resulting collection of custom entites is fine, except that each object in the collection does not contain any items in its child collection. (i.e. it doesn't get to "...do some more stuff..." above. Can someone please explain what I am doing wrong? Is it possible to serialize ArrayLists within a generic collection of custom entities?

Read the article

ASP.NET Web API Exception Handling

- by Fredrik N

When I talk about exceptions in my product team I often talk about two kind of exceptions, business and critical exceptions. Business exceptions are exceptions thrown based on “business rules”, for example if you aren’t allowed to do a purchase. Business exceptions in most case aren’t important to log into a log file, they can directly be shown to the user. An example of a business exception could be "DeniedToPurchaseException”, or some validation exceptions such as “FirstNameIsMissingException” etc. Critical Exceptions are all other kind of exceptions such as the SQL server is down etc. Those kind of exception message need to be logged and should not reach the user, because they can contain information that can be harmful if it reach out to wrong kind of users. I often distinguish business exceptions from critical exceptions by creating a base class called BusinessException, then in my error handling code I catch on the type BusinessException and all other exceptions will be handled as critical exceptions. This blog post will be about different ways to handle exceptions and how Business and Critical Exceptions could be handled. Web API and Exceptions the basics When an exception is thrown in a ApiController a response message will be returned with a status code set to 500 and a response formatted by the formatters based on the “Accept” or “Content-Type” HTTP header, for example JSON or XML. Here is an example: public IEnumerable<string> Get() { throw new ApplicationException("Error!!!!!"); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response message will be: HTTP/1.1 500 Internal Server Error Content-Length: 860 Content-Type: application/json; charset=utf-8 { "ExceptionType":"System.ApplicationException","Message":"Error!!!!!","StackTrace":" at ..."} .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The stack trace will be returned to the client, this is because of making it easier to debug. Be careful so you don’t leak out some sensitive information to the client. So as long as you are developing your API, this is not harmful. In a production environment it can be better to log exceptions and return a user friendly exception instead of the original exception. There is a specific exception shipped with ASP.NET Web API that will not use the formatters based on the “Accept” or “Content-Type” HTTP header, it is the exception is the HttpResponseException class. Here is an example where the HttpReponseExcetpion is used: // GET api/values [ExceptionHandling] public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError)); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The response will not contain any content, only header information and the status code based on the HttpStatusCode passed as an argument to the HttpResponseMessage. Because the HttpResponsException takes a HttpResponseMessage as an argument, we can give the response a content: public IEnumerable<string> Get() { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("My Error Message"), ReasonPhrase = "Critical Exception" }); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code above will have the following response: HTTP/1.1 500 Critical Exception Content-Length: 5 Content-Type: text/plain; charset=utf-8 My Error Message .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The Content property of the HttpResponseMessage doesn’t need to be just plain text, it can also be other formats, for example JSON, XML etc. By using the HttpResponseException we can for example catch an exception and throw a user friendly exception instead: public IEnumerable<string> Get() { try { DoSomething(); return new string[] { "value1", "value2" }; } catch (Exception e) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Adding a try catch to every ApiController methods will only end in duplication of code, by using a custom ExceptionFilterAttribute or our own custom ApiController base class we can reduce code duplicationof code and also have a more general exception handler for our ApiControllers . By creating a custom ApiController’s and override the ExecuteAsync method, we can add a try catch around the base.ExecuteAsync method, but I prefer to skip the creation of a own custom ApiController, better to use a solution that require few files to be modified. The ExceptionFilterAttribute has a OnException method that we can override and add our exception handling. Here is an example: using System; using System.Diagnostics; using System.Net; using System.Net.Http; using System.Web.Http; using System.Web.Http.Filters; public class ExceptionHandlingAttribute : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { if (context.Exception is BusinessException) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(context.Exception.Message), ReasonPhrase = "Exception" }); } //Log Critical errors Debug.WriteLine(context.Exception); throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent("An error occurred, please try again or contact the administrator."), ReasonPhrase = "Critical Exception" }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: Something to have in mind is that the ExceptionFilterAttribute will be ignored if the ApiController action method throws a HttpResponseException. The code above will always make sure a HttpResponseExceptions will be returned, it will also make sure the critical exceptions will show a more user friendly message. The OnException method can also be used to log exceptions. By using a ExceptionFilterAttribute the Get() method in the previous example can now look like this: public IEnumerable<string> Get() { DoSomething(); return new string[] { "value1", "value2" }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use the an ExceptionFilterAttribute, we can for example add the ExceptionFilterAttribute to our ApiControllers methods or to the ApiController class definition, or register it globally for all ApiControllers. You can read more about is here. Note: If something goes wrong in the ExceptionFilterAttribute and an exception is thrown that is not of type HttpResponseException, a formatted exception will be thrown with stack trace etc to the client. How about using a custom IHttpActionInvoker? We can create our own IHTTPActionInvoker and add Exception handling to the invoker. The IHttpActionInvoker will be used to invoke the ApiController’s ExecuteAsync method. Here is an example where the default IHttpActionInvoker, ApiControllerActionInvoker, is used to add exception handling: public class MyApiControllerActionInvoker : ApiControllerActionInvoker { public override Task<HttpResponseMessage> InvokeActionAsync(HttpActionContext actionContext, System.Threading.CancellationToken cancellationToken) { var result = base.InvokeActionAsync(actionContext, cancellationToken); if (result.Exception != null && result.Exception.GetBaseException() != null) { var baseException = result.Exception.GetBaseException(); if (baseException is BusinessException) { return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Error" }); } else { //Log critical error Debug.WriteLine(baseException); return Task.Run<HttpResponseMessage>(() => new HttpResponseMessage(HttpStatusCode.InternalServerError) { Content = new StringContent(baseException.Message), ReasonPhrase = "Critical Error" }); } } return result; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can register the IHttpActionInvoker with your own IoC to resolve the MyApiContollerActionInvoker, or add it in the Global.asax: GlobalConfiguration.Configuration.Services.Remove(typeof(IHttpActionInvoker), GlobalConfiguration.Configuration.Services.GetActionInvoker()); GlobalConfiguration.Configuration.Services.Add(typeof(IHttpActionInvoker), new MyApiControllerActionInvoker()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } How about using a Message Handler for Exception Handling? By creating a custom Message Handler, we can handle error after the ApiController and the ExceptionFilterAttribute is invoked and in that way create a global exception handler, BUT, the only thing we can take a look at is the HttpResponseMessage, we can’t add a try catch around the Message Handler’s SendAsync method. The last Message Handler that will be used in the Wep API pipe-line is the HttpControllerDispatcher and this Message Handler is added to the HttpServer in an early stage. The HttpControllerDispatcher will use the IHttpActionInvoker to invoke the ApiController method. The HttpControllerDipatcher has a try catch that will turn ALL exceptions into a HttpResponseMessage, so that is the reason why a try catch around the SendAsync in a custom Message Handler want help us. If we create our own Host for the Wep API we could create our own custom HttpControllerDispatcher and add or exception handler to that class, but that would be little tricky but is possible. We can in a Message Handler take a look at the HttpResponseMessage’s IsSuccessStatusCode property to see if the request has failed and if we throw the HttpResponseException in our ApiControllers, we could use the HttpResponseException and give it a Reason Phrase and use that to identify business exceptions or critical exceptions. I wouldn’t add an exception handler into a Message Handler, instead I should use the ExceptionFilterAttribute and register it globally for all ApiControllers. BUT, now to another interesting issue. What will happen if we have a Message Handler that throws an exception? Those exceptions will not be catch and handled by the ExceptionFilterAttribute. I found a bug in my previews blog post about “Log message Request and Response in ASP.NET WebAPI” in the MessageHandler I use to log incoming and outgoing messages. Here is the code from my blog before I fixed the bug: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); var responseMessage = await response.Content.ReadAsByteArrayAsync(); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If a ApiController throws a HttpResponseException, the Content property of the HttpResponseMessage from the SendAsync will be NULL. So a null reference exception is thrown within the MessageHandler. The yellow screen of death will be returned to the client, and the content is HTML and the Http status code is 500. The bug in the MessageHandler was solved by adding a check against the HttpResponseMessage’s IsSuccessStatusCode property: public abstract class MessageHandler : DelegatingHandler { protected override async Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) { var corrId = string.Format("{0}{1}", DateTime.Now.Ticks, Thread.CurrentThread.ManagedThreadId); var requestInfo = string.Format("{0} {1}", request.Method, request.RequestUri); var requestMessage = await request.Content.ReadAsByteArrayAsync(); await IncommingMessageAsync(corrId, requestInfo, requestMessage); var response = await base.SendAsync(request, cancellationToken); byte[] responseMessage; if (response.IsSuccessStatusCode) responseMessage = await response.Content.ReadAsByteArrayAsync(); else responseMessage = Encoding.UTF8.GetBytes(response.ReasonPhrase); await OutgoingMessageAsync(corrId, requestInfo, responseMessage); return response; } protected abstract Task IncommingMessageAsync(string correlationId, string requestInfo, byte[] message); protected abstract Task OutgoingMessageAsync(string correlationId, string requestInfo, byte[] message); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If we don’t handle the exceptions that can occur in a custom Message Handler, we can have a hard time to find the problem causing the exception. The savior in this case is the Global.asax’s Application_Error: protected void Application_Error() { var exception = Server.GetLastError(); Debug.WriteLine(exception); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I would recommend you to add the Application_Error to the Global.asax and log all exceptions to make sure all kind of exception is handled. Summary There are different ways we could add Exception Handling to the Wep API, we can use a custom ApiController, ExceptionFilterAttribute, IHttpActionInvoker or Message Handler. The ExceptionFilterAttribute would be a good place to add a global exception handling, require very few modification, just register it globally for all ApiControllers, even the IHttpActionInvoker can be used to minimize the modifications of files. Adding the Application_Error to the global.asax is a good way to catch all unhandled exception that can occur, for example exception thrown in a Message Handler. If you want to know when I have posted a blog post, you can follow me on twitter @fredrikn

Read the article

Upgrading VSIX extensions from VS2012 to VS2013

- by Tarun Arora [Microsoft MVP]

Originally posted on: http://geekswithblogs.net/TarunArora/archive/2013/06/27/upgrading-vsix-extensions-from-vs2012-to-vs2013.aspx As consumers of your Visual Studio extensions start to move over to VS 2013, you will have to upgrade the Visual Studio extensions you build for Visual Studio 2012 to Visual Studio 2013 and republish to the Visual Studio extension gallery. Failing which, it will not be possible for your consumers to install and use your extensions on Visual Studio 2013. Objective In this blog post, I’ll show you how simple it is to upgrade your Visual Studio 2012 extension to Visual Studio 2013. There aren’t any reported breaking changes between VS 2012 SDK and VS 2013 SDK, the upgrade usually involves, rebuilding the extension against VS 2013 SDK and updating the vsix manifest file. Walkthrough Download the Visual Studio 2013 SDK - You will need to download the Visual Studio 2013 SDK in order to open up the Visual Studio extension project in Visual Studio 2013. The SDK can be downloaded from here. Install the SDK before you proceed. 2. Once the VS 2013 SDK has been installed, open up your package project. For the purposes of this blog post, I’ll open up the Avanade Extension – Software Inventory in Visual Studio 2013. You will notice that Visual Studio doesn’t load the project but let’s you know that the project needs to be Migrated. 3. Right click the project and choose the option ‘Reload Project’ from the Context Menu. 4. Choosing the Reload Project option brings up an upgrade window, telling you that the upgrade is a one way only upgrade i.e. the project will be changed to work with Visual Studio 2013 and you will not be able to open the project up in Visual Studio 2012. My recommendation would be to create a Visual Studio 2013 branch and upgrading the project in that branch only, so if you need to go back to Visual Studio 2012 project at some point, you have a handy reference in a separate branch. 5. Upon clicking Ok, the project is updated. See below, the following changes are made at the time of upgrade, - The runtime version is updated in the Resources.Designer.cs file - The Minimum version of Visual Studio in the package project file is changed from 11.0 to 12.0 6. Reference VS 2013 dll’s rather than VS 2012 dll’s. So reference Microsoft.TeamFoundation.Client.dll and Microsoft.TeamFoundation.Controls.dll from C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\ReferenceAssemblies\v2.0 and C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\ReferenceAssemblies\v4.5. If you have any other API references, then change the references to point to VS 2013 instead of VS 2012. 7. Rebuild your solution to ensure there are no breaking changes. Success! 8. Update VSIX Manifest file (the file source.extnsion.vsixmanifest contains the meta data for your VSIX). - Update the Install Targets from 11.0 to 12.0. This basically enforces that the extension can be installed on Visual Studio 2013 version of Visual Studio. - Update the Dependencies from Visual Studio MPF 11.0 to Visual Studio MPF 12.0 9. Rebuild the solution and open up the bin folder for the Package project and look for the file *.vsix file [Microsoft Visual Studio Extension]. - This is basically the installer for your extension. - Double click the installer to launch the installer wizard. Viola! You can see the package installation wizard opens up and gives you the option to install the extension for Visual Studio 2013. - Click Install to Continue - Note – If you run into the exception “23/06/2013 10:42:18 - Install Error : Microsoft.VisualStudio.ExtensionManager.InstallByMsiException: The InstalledByMSI element in extension Avanade Extensions cannot be 'true' when installing an extension through the Extensions and Updates Installer. The element can only be 'true' when an MSI lays down the extension manifest file.” Ensure you have the option “This VSIX is installed by Windows Installer” unchecked in the Install Targets tab. 10. Verifying that the extension has installed correctly. - Open Extension Manager and verify that the installed extension shows up in the extension manager “list of installed VSIX”. 11. First Look at the updated Extension - The links have now been moved to the context menu, so to see the navigation links, you’ll have to right click on the icon and select the option from the context menu. Note – The Avanade Extension being used in the demo has been developed by Utkarsh and Tarun. The Software Inventory Extension for Visual Studio 2012… allows you to see the list of Software installed on the hosted build server right from with in Visual Studio, the extension also allows you to export this list to excel. More details on how this has been implemented can be found here. I hope you found this useful. In case you have any questions or feedback, feel free to reach out on Visual Studio extensibility MSDN forums or via Microsoft Visual Studio feedback forum. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

Read the article

Building InstallShield based Installers using Team Build 2010

- by jehan

Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list. Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from from FileàNewà project àInstallShield Projects. Here, I’m using InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for TailSpin application. Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting. Once I did above changes, the build got successful.

Read the article

Can't install graphic drivers in 12.04

- by yinon

The driver is ATI/AMD proprietary FGLRX graphics driver. After clicking Activate, it asks for my password and starts downloading. Then it shows an error message: 2012-10-03 16:16:04,227 DEBUG: updating <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> 2012-10-03 16:16:06,172 DEBUG: reading modalias file /lib/modules/3.2.0-29-generic-pae/modules.alias 2012-10-03 16:16:06,383 DEBUG: reading modalias file /usr/share/jockey/modaliases/b43 2012-10-03 16:16:06,386 DEBUG: reading modalias file /usr/share/jockey/modaliases/disable-upstream-nvidia 2012-10-03 16:16:06,456 DEBUG: loading custom handler /usr/share/jockey/handlers/pvr-omap4.py 2012-10-03 16:16:06,506 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-10-03 16:16:06,509 DEBUG: Instantiated Handler subclass __builtin__.PVROmap4Driver from name PVROmap4Driver 2012-10-03 16:16:06,682 DEBUG: PowerVR SGX proprietary graphics driver for OMAP 4 not available 2012-10-03 16:16:06,682 DEBUG: loading custom handler /usr/share/jockey/handlers/cdv.py 2012-10-03 16:16:06,727 WARNING: modinfo for module cedarview_gfx failed: ERROR: modinfo: could not find module cedarview_gfx 2012-10-03 16:16:06,728 DEBUG: Instantiated Handler subclass __builtin__.CdvDriver from name CdvDriver 2012-10-03 16:16:06,728 DEBUG: cdv.available: falling back to default 2012-10-03 16:16:06,772 DEBUG: Intel Cedarview graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,772 DEBUG: loading custom handler /usr/share/jockey/handlers/vmware-client.py 2012-10-03 16:16:06,781 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-10-03 16:16:06,781 DEBUG: Instantiated Handler subclass __builtin__.VmwareClientHandler from name VmwareClientHandler 2012-10-03 16:16:06,795 DEBUG: VMWare Client Tools availability undetermined, adding to pool 2012-10-03 16:16:06,796 DEBUG: loading custom handler /usr/share/jockey/handlers/fglrx.py 2012-10-03 16:16:06,801 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:06,805 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriverUpdate from name FglrxDriverUpdate 2012-10-03 16:16:06,805 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,833 DEBUG: ATI/AMD proprietary FGLRX graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:06,836 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:06,840 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriver from name FglrxDriver 2012-10-03 16:16:06,840 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,873 DEBUG: ATI/AMD proprietary FGLRX graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,873 DEBUG: loading custom handler /usr/share/jockey/handlers/dvb_usb_firmware.py 2012-10-03 16:16:06,925 DEBUG: Instantiated Handler subclass __builtin__.DvbUsbFirmwareHandler from name DvbUsbFirmwareHandler 2012-10-03 16:16:06,926 DEBUG: Firmware for DVB cards not available 2012-10-03 16:16:06,926 DEBUG: loading custom handler /usr/share/jockey/handlers/nvidia.py 2012-10-03 16:16:06,961 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-10-03 16:16:06,967 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96 from name NvidiaDriver96 2012-10-03 16:16:06,968 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:06,980 DEBUG: XorgDriverHandler(nvidia_96, nvidia-96, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:06,980 DEBUG: NVIDIA accelerated graphics driver not available 2012-10-03 16:16:06,983 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-10-03 16:16:06,987 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrent from name NvidiaDriverCurrent 2012-10-03 16:16:06,987 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,015 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,018 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-10-03 16:16:07,021 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrentUpdates from name NvidiaDriverCurrentUpdates 2012-10-03 16:16:07,022 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,066 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,069 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-10-03 16:16:07,072 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173Updates from name NvidiaDriver173Updates 2012-10-03 16:16:07,073 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,105 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,112 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-10-03 16:16:07,118 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173 from name NvidiaDriver173 2012-10-03 16:16:07,119 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,159 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,166 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-10-03 16:16:07,171 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96Updates from name NvidiaDriver96Updates 2012-10-03 16:16:07,171 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,188 DEBUG: XorgDriverHandler(nvidia_96_updates, nvidia-96-updates, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:07,188 DEBUG: NVIDIA accelerated graphics driver (post-release updates) not available 2012-10-03 16:16:07,188 DEBUG: loading custom handler /usr/share/jockey/handlers/madwifi.py 2012-10-03 16:16:07,195 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-10-03 16:16:07,195 DEBUG: Instantiated Handler subclass __builtin__.MadwifiHandler from name MadwifiHandler 2012-10-03 16:16:07,196 DEBUG: Alternate Atheros "madwifi" driver availability undetermined, adding to pool 2012-10-03 16:16:07,196 DEBUG: loading custom handler /usr/share/jockey/handlers/sl_modem.py 2012-10-03 16:16:07,213 DEBUG: Instantiated Handler subclass __builtin__.SlModem from name SlModem 2012-10-03 16:16:07,234 DEBUG: Software modem not available 2012-10-03 16:16:07,234 DEBUG: loading custom handler /usr/share/jockey/handlers/broadcom_wl.py 2012-10-03 16:16:07,239 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-10-03 16:16:07,277 DEBUG: Instantiated Handler subclass __builtin__.BroadcomWLHandler from name BroadcomWLHandler 2012-10-03 16:16:07,277 DEBUG: Broadcom STA wireless driver availability undetermined, adding to pool 2012-10-03 16:16:07,278 DEBUG: all custom handlers loaded 2012-10-03 16:16:07,278 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027D8sv00001043sd000082EAbc04sc03i00') 2012-10-03 16:16:07,568 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0000v0000p0000e0000-e0,5,kramlsfw6,') 2012-10-03 16:16:07,704 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,704 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,704 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00') 2012-10-03 16:16:07,707 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801'} 2012-10-03 16:16:07,707 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C01:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0B00:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001969d00001026sv00001043sd00008304bc02sc00i00') 2012-10-03 16:16:07,710 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'atl1e'} 2012-10-03 16:16:07,710 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'atl1e', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,710 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0003v04F2p0816e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:pcspkr') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp'} 2012-10-03 16:16:07,712 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v1D6Bp0001d0302dc09dsc00dp00ic09isc00ip00') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0019v0000p0001e0000-e0,1,k74,ramlsfw') 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C04:') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:eisa') 2012-10-03 16:16:07,725 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:Fixed MDIO bus') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00') 2012-10-03 16:16:07,731 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v045Ep0766d0101dcEFdsc02dp01ic01isc01ip00') 2012-10-03 16:16:07,777 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio'} 2012-10-03 16:16:07,777 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0F03:PNP0F13:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0000:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001002d000095C5sv0000174Bsd0000E400bc03sc00i00') 2012-10-03 16:16:08,072 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx_updates', 'package': 'fglrx-updates'} 2012-10-03 16:16:08,133 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,134 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,072 DEBUG: found match in handler pool xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,136 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:08,147 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,173 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,173 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,162 DEBUG: got handler xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,173 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx', 'package': 'fglrx'} 2012-10-03 16:16:08,184 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,184 DEBUG: fglrx is not the alternative in use 2012-10-03 16:16:08,173 DEBUG: found match in handler pool xorg:fglrx([FglrxDriver, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver) 2012-10-03 16:16:08,187 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:08,190 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,216 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None . . . 2012-10-03 16:18:10,552 DEBUG: install progress initramfs-tools 62.500000 2012-10-03 16:18:22,249 DEBUG: install progress libc-bin 62.500000 2012-10-03 16:18:23,251 DEBUG: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,256 ERROR: Package failed to install: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,590 WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver 2012-10-03 16:18:43,601 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,601 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:43,617 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,617 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,143 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,144 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,154 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,154 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,182 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,182 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:54,215 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,215 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,229 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,229 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,268 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,268 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,279 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,279 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,298 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,298 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:57,828 DEBUG: Shutting down I don't know how to troubleshoot from looking at the log file, could somebody assist me with this please? You can download the log file at: https://www.dropbox.com/s/a59d2hyabo02q5z/jockey.log

Read the article

How to UEFI install Ubuntu 12.10?

- by Geezanansa

Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

Read the article

Installed Ubuntu 14.04LTS

- by user291729

On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

Read the article

MySql for Visual Studio 1.0.2 GA has been released

- by fernando

MySQL for Visual Studio is a new product including all of the Visual Studio integration previously available as part of Connector/Net. The product is now released as GA and is appropriate for use in production environments. It is compatible with MySQL Server versions 5.0-5.7 and Visual Studio versions 2008-2012. It is now available as part of MySql Installer for Windows (http://dev.mysql.com/tech-resources/articles/mysql-installer-for-windows.html). The 1.0 version of MySQL for Visual Studio brings the following new features: Workbench Launching. MySql Utilities Launching. Table Script Generation. The functionality of the core libraries (ADO.NET, EF, ASP.NET providers is available as the separate download of Connector/NET 6.7). Features available from previous versions: Server explorer connections Design time support Entity Framework designer (Database First & Model First) Stored Routines Debugger Intellisense ASP.NET Website Configuration Tool Workbench Launching ------------------------------------------- A context menu for connections in Server Explorer allows to launch Workbench (if Workbench is installed). MySql Utilities Launching ------------------------------------------- A context menu for connections in Server Explorer allows to launch a prompt for MySql Utilities (if MySql Utilities is installed). Table Script Generation ------------------------------------------- A context menu for tables is available in Server Explorer to generate the script for a table. The full list of bug fixes for "MySql for Visual Studio" 1.0 follows: 1.0.2 - Fix for Documentation not found (Oracle bug #6915712). - Fix for intellisense completion, now Views are displayed together with Tables calling intellisense (Oracle Bug #16881451). - Fix for parser syntax, now the parser supports the clause ALTER TABLE table_name RENAME {INDEX|KEY} old_index_name TO new_index_name introduced in MySql 5.7. (Oracle Bug #16881481) - Fix for Debugging a routine produces an error when binary log is enabled (Oracle bug #16941181). - Fix for WorkItem 552: MySql for Visual Studio Installer fails when installing against VS2008. - Fix for bug Vs plugin installer is not working (Oracle bug #16973339). - Fix for bug Release notes file has no notes about (Oracle bug #16973326). 1.0.1 - Fix for "README" file and "Release Notes" file referes to connector 6.6. - Fix for Parser fails to recognizes a complex view (Oracle bug #16815427). - Fix for Altering table's primary key in designer not working (Oracle bug #16866053). - Fix for Web configuration tool is not shown on mysql for visual studio (Oracle bug # 16902696). - Fix for Model first is not supported using mysql for visual studio (Oracle bug # 16902743). - Fix for Mysql for vs should not be installed with connector/net version < 6.7 (Oracle bug # 16902774). - Fix for Resolve assemblies dependencies between MySql.Data (Connector/Net version) and MySql.Data (WI # 460). - Fix for Showing an exception related to resources (Oracle bug #16903039). 1.0.0 - Added new option on Connection Node for Server Explorer Window in Visual Studio to give the user the option when WB is Installed to open the MySQL Utilities console window. - Added new option on Connection Node for Server Explorer Window in Visual Studio to give the user the option when WB is Installed to open the SQL Editor Window using the same connection. - Implemented a menu option to generate table script from server explorer context menu (Tracker task 433). - Fix for bug If using repair option, then vs2010 doesnt allow to connect to db (Oracle bug #16238242). - Fix for bug "Can't change the name for a view in view editor" (Oracle bug #13805346). - Fix for Debugger cannot debug stored procedures with a main begin labeled and declare statements included (Oracle bug #16002371). - Fix for bug If using repair option at Installer, then vs2010 doesnt allow to connect to db (Oracle bug #16238242). - Fix for "Cannot change the name for a Foreign Key in table designer" (Oracle bug #16238068). - Fix for error when trying to set primary key for a column with same name as mysql keyword (like INT) in table designer (Oracle bug #16238102). - Fix for databases not displayed in connect dialog for mysql script when correcting credentials, after entering a bad password (Oracle bug #13805337). - Fix for Debugger fails trying to debug a stored routine in a MySql server hosted in linux without lower_case_table_names option enabled (MySql bug #69065, Oracle bug #16770384). - Fix for Debugger issue, Values through watch tab shouldn't allow to be modified (Oracle bug #14545448). - Fix for Visual Studio Mysql editor colors cannot be customized (Oracle bug #16453324, MySql bug #67994). The documentation is available as part of Connector/NET at http://dev.mysql.com/doc/refman/5.7/en/connector-net.html Enjoy and thanks for the support! -- Fernando Gonzalez Sanchez | Software Engineer | Oracle MySQL Windows Experience Team, Connector/NET Guadalajara | Jalisco | Mexico

Read the article

Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

- by Arkadius

I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

Read the article

How To: Spell Check InfoPath web form in SharePoint 2010

- by Jeremy Ramos

Originally posted on: http://geekswithblogs.net/JeremyRamos/archive/2013/11/07/how-to-spell-check-infopath-web-form-in-sharepoint-2010.aspxThis is a sequel to my 2011 post about How To: Spell Check InfoPath Web Form in SharePoint. This time I will share how I managed to achieve Spell Checking in SharePoint 2010. This time round, we have changed our Online Forms strategy to use Custom lists instead of Form Libraries. I thought everything will be smooth sailing as we are using all OOTB features. So, we customised a Custom list form using InfoPath and added a few Rich Text Boxes (Spell Check is a requirement for this specific project). All is good in the InfoPath client including the Spell Checker so, happy days, I published straight away.Here comes the surprises now. I browsed to my Custom List and clicked Add New Item. This launched my Form in a modal dialog format. I went to my Rich Text Boxes to check the spell checker, and voila, it's disabled!I tried hacking the FormServer.aspx and the CustomSpellCheckEntirePage.js again but the new FormServer.aspx behaves differently than of MOSS 2007's. I searched for answers in many blogs to no avail. Often ending up being linked to my old blog post. I also tried placing the spell check javascript into a Content Editor Webpart of the Item's New Form and Edit form. It is launching the Spell Check dialog but it's not spellchecking the page correctly.At this point, I decided I needed to get my project across ASAP so enough with experimentations and logged a ticket with Microsoft Premier Support.On a call with the Support Engineer, I browsed through the Custom List and to the item to demonstrate my problem. Suddenly, the Spell Check tab in the toolbar is now Enabled! Surprised? Not much, it's Microsoft!Anyway, to cut my story short, here is a summary of my solution:Navigate to your Custom ListIn the Ribbon Toolbar, navigate to List > Customize List > Form Web Parts > Content Type Forms > (Item) New Form. This will display the newifs.aspx which is the page displayed when Add New Item is clicked. This page, just like any other SharePoint page, contains webparts. In this case, we have the InfoPath Form Web Part.Add a Content Editor Web Part (CEWP) on top of the InfoPath Form Web Part. (A blank CEWP would do for this example)Navigate to Page and click Stop EditingClick Add New Item again and navigate to a Rich Text box. Tadah! The Spell Check tab is now enabled!Do the same steps for the (Item) Edit Form to enable Spell Checks when editing an item.This "no code" solution discovered purely by accident!

Read the article

Creating a Yes/No MessageBox in a NuGet install/uninstall script

- by ParadigmShift

Sometimes getting a little feedback during the install/uninstall process of a NuGet package could be really useful. Instead of accounting for all possible ways to install your NuGet package for every user, you can simplify the installation by clarifying with the user what they want. This example shows how to generate a windows yes/no message box to get input from the user in the PowerShell install or uninstall script. We’ll use the prompt on the uninstall to confirm if the user wants to delete a custom setting that the initial install placed in their configuration. Obviously you could use the prompt in any way you want. The objects of the message box are generated similar to the controls in the code behind of a WinForm. At the beginning of your script enter this: param($installPath, $toolsPath, $package, $project) # Set up path variables $solutionDir = Get-SolutionDir $projectName = (Get-Project).ProjectName $projectPath = Join-Path $solutionDir $projectName ################################################################################################ # WinForm generation for prompt ################################################################################################ function Ask-Delete-Custom-Settings { [void][reflection.assembly]::loadwithpartialname("System.Windows.Forms") [Void][reflection.assembly]::loadwithpartialname("System.Drawing") $title = "Package Uninstall" $message = "Delete the customized settings?" #Create form and controls $form1 = New-Object System.Windows.Forms.Form $label1 = New-Object System.Windows.Forms.Label $btnYes = New-Object System.Windows.Forms.Button $btnNo = New-Object System.Windows.Forms.Button #Set properties of controls and form ############ # label1 # ############ $label1.Location = New-Object System.Drawing.Point(12,9) $label1.Name = "label1" $label1.Size = New-Object System.Drawing.Size(254,17) $label1.TabIndex = 0 $label1.Text = $message ############# # btnYes # ############# $btnYes.Location = New-Object System.Drawing.Point(156,45) $btnYes.Name = "btnYes" $btnYes.Size = New-Object System.Drawing.Size(48,25) $btnYes.TabIndex = 1 $btnYes.Text = "Yes" ########### # btnNo # ########### $btnNo.Location = New-Object System.Drawing.Point(210,45) $btnNo.Name = "btnNo" $btnNo.Size = New-Object System.Drawing.Size(48,25) $btnNo.TabIndex = 2 $btnNo.Text = "No" ########### # form1 # ########### $form1.ClientSize = New-Object System.Drawing.Size(281,86) $form1.Controls.Add($label1) $form1.Controls.Add($btnYes) $form1.Controls.Add($btnNo) $form1.Name = "Form1" $form1.Text = $title #Event Handler $btnYes.add_Click({btnYes_Click}) $btnNo.add_Click({btnNo_Click}) return $form1.ShowDialog() } function btnYes_Click { #6 = Yes $form1.DialogResult = 6 } function btnNo_Click { #7 = No $form1.DialogResult = 7 } ################################################################################################ This has also wired up the click events to the form. This is all it takes to create the message box. Now we have to actually use the message box and get the user’s response or this is all pointless. We’ll then delete the section of the application/web configuration called <Custom.Settings> [xml] $configXmlContent = Get-Content $configFile Write-Host "Please respond to the question in the Dialog Box." $dialogResult = Ask-Delete-Custom-Settings #6 = Yes #7 = No Write-Host "dialogResult = $dialogResult" if ($dialogResult.ToString() -eq "Yes") { Write-Host "Deleting customized settings" $customSettingsNode = $configXmlContent.configuration.Item("Custom.Settings") $configXmlContent.configuration.RemoveChild($customSettingsNode) $configXmlContent.Save($configFile) } if ($dialogResult.ToString() -eq "No") { Write-Host "Do not delete customized settings" } The part where I check if ($dialog.Result.ToString() –eq “Yes”) could just as easily check the value for either 6 or 7 (Yes or No). I just personally decided I liked this way better. Shahzad Qureshi is a Software Engineer and Consultant in Salt Lake City, Utah, USA His certifications include: Microsoft Certified System Engineer 3CX Certified Partner Global Information Assurance Certification – Secure Software Programmer – .NET He is the owner of Utah VoIP Store at http://www.utahvoipstore.com/ and SWS Development at http://www.swsdev.com/ and publishes windows apps under the name Blue Voice.

Read the article

OutputStream is not available when a custom TextWriter is used.

- by Pinu

this is my function which converts pdf to png image, it's throwing an error on this line-- stream.WriteTo(Response.OutputStream); Is there some thing wrong?? protected void CreatePngFromPdf() { try { string PDFLocation = string.Format(@"\\XXXX\{0}\{1}\{2}.pdf", Yr, Loc.Substring(0, 4), Loc.Substring(4, 4)); Utilities.WebPDF.PDF WebPDF = new DocuvaultMVC.Utilities.WebPDF.PDF(); WebPDF.Credentials = new NetworkCredential(@"xyz", "xyz"); byte[] png = WebPDF.StreamPdfPageAsPngResize(PDFLocation,PageNumber, 612, 792); MemoryStream ms = new MemoryStream(png); MemoryStream stream = new MemoryStream(); int newWidth = 612; int newHeight = 792; System.Drawing.Image newImg = System.Drawing.Image.FromStream(ms); Bitmap temp = new Bitmap(newWidth, newHeight, newImg.PixelFormat); Graphics newImage = Graphics.FromImage(temp); newImage.DrawImage(newImg, 0, 0, newWidth, newHeight); newImg.Dispose(); temp.Save(stream, ImageFormat.Png); stream.WriteTo(Response.OutputStream); temp.Dispose(); stream.Dispose(); } catch (Exception ex) { Response.Write(ex.Message.ToString()); } }

Read the article

Android: How to bind spinner to custom object list?

- by niko

Hi, In the user interface there has to be a spinner which contains some names (the names are visible) and each name has its own ID (the IDs are not equal to display sequence). When the user selects the name from the list the variable currentID has to be changed. The application contains the ArrayList Where User is an object with ID and name: public class User{ public int ID; public String name; } What I don't know is how to create a spinner which displays the list of user's names and bind spinner items to IDs so when the spinner item is selected/changed the variable currentID is set to appropriate value. I would appreciate if anyone could show the solution of the described problem or provide any link useful to solve the problem. Thanks!

Read the article

Using DisplayTag library, I want to have the currently selected row have a unique custom class using

- by Mary

I have been trying to figure out how to highlight the selected row in a table. In my jsp I have jsp scriplet that can get access to the id of the row the displaytag library is creating. I want to compare it to the the id of the current row selected by the user ${currentNoteId}. Right now if the row id = 849 (hardcoded) the class "currentClass" is added to just that row of the table. I need to change the 849 for the {$currentNoteId} and I don't know how to do it. I am using java, Spring MVC. The jsp: ... <% request.setAttribute("dyndecorator", new org.displaytag.decorator.TableDecorator() { public String addRowClass() { edu.ilstu.ais.advisorApps.business.Note row = (edu.ilstu.ais.advisorApps.business.Note)getCurrentRowObject(); String rowId = row.getId(); if ( rowId.equals("849") ) { return "currentClass"; } return null; } }); %> <c:set var="currentNoteId" value="${studentNotes.currentNote.id}"/> ... <display:table id="noteTable" name="${ studentNotes.studentList }" pagesize="20" requestURI="notesView.form.html" decorator="dyndecorator"> <display:column title="Select" class="yui-button-match" href="/notesView.form.html" paramId="note.id" paramProperty="id"> <input type="button" class="yui-button-match2" name="select" value="Select"/> </display:column> <display:column property="userName" title="Created By" sortable="true"/> <display:column property="createDate" title="Created On" sortable="true" format="{0,date,MM/dd/yy hh:mm:ss a}"/> <display:column property="detail" title="Detail" sortable="true"/> </display:table> ... This could also get done using javascript and that might be best, but the documentation suggested this so I thought I would try it. I cannot find an example anywhere using the addRowClass() unless the comparison is to a field already in the row (a dollar amount is used in the documentation example) or hardcoded in like the "849" id. Thanks for any help you can provide.

Read the article

how do I register a custom conversion Service in spring 3 / webflow 2?

- by nont

I've been trying to follow this example and using the reference to guide me, but I'm having no luck. I've defined a converter: import org.springframework.binding.convert.converters.StringToObject; import java.text.DateFormat; import java.text.SimpleDateFormat; import java.text.ParseException; import java.util.Date; public class StringToDateTwoWayConverter extends StringToObject { private DateFormat format = null; public StringToDateTwoWayConverter () { super(StringToDateTwoWayConverter.class); format = new SimpleDateFormat("MM/dd/yyyy"); } @Override protected Object toObject(String string, Class targetClass) throws Exception { Date date = null; try { date = format.parse(string); } catch (ParseException e) { e.printStackTrace(); return null; } return date; } @Override protected String toString(Object object) throws Exception { Date date = (Date) object; return format.format(date); } } and a conversionService: import org.springframework.binding.convert.service.DefaultConversionService; import org.springframework.stereotype.Component; @Component("conversionService") public class ApplicationConversionService extends DefaultConversionService { @Override protected void addDefaultConverters() { super.addDefaultConverters(); this.addConverter(new StringToDateTwoWayConverter()); this.addConverter("shortDate", new StringToDateTwoWayConverter()); } } and configured it: <webflow:flow-builder-services id="flowBuilderServices" conversion-service="conversionService" .../> However, upon startup, I'm greeted with this exception: Caused by: org.springframework.beans.factory.UnsatisfiedDependencyException: Error creating bean with name '(inner bean)': Unsatisfied dependency expressed through constructor argument with index 0 of type [org.springframework.core.convert.ConversionService]: Could not convert constructor argument value of type [com.yadayada.converter.ApplicationConversionService] to required type [org.springframework.core.convert.ConversionService]: Failed to convert value of type 'com.yadayada.converter.ApplicationConversionService' to required type 'org.springframework.core.convert.ConversionService'; nested exception is java.lang.IllegalStateException: Cannot convert value of type [com.yadayada.converter.ApplicationConversionService] to required type [org.springframework.core.convert.ConversionService]: no matching editors or conversion strategy found at org.springframework.beans.factory.support.ConstructorResolver.createArgumentArray(ConstructorResolver.java:687) at org.springframework.beans.factory.support.ConstructorResolver.autowireConstructor(ConstructorResolver.java:195) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.autowireConstructor(AbstractAutowireCapableBeanFactory.java:993) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:897) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:485) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:270) ... 60 more I'm thoroughly puzzled why its not working. The conversion service implements ConversionService through its base class, so I don't see the problem. Any insight much appreciated!

Read the article

how to make UIAlertView with custom font , height and width?

- by shreya

Hi All, I want to show pop up of question with it's options. Each question have 3 options. Currently the text is not fitting in the UIAlertView. My UIalertView is in landscape mode. my questions are, 1) How to change the font and font size of UIAlertView message and Button? 2) How to increase the height and width of UIAlertView? OR please suggest me any other way , by which I implement the same pop up. Thanks .

Read the article

How can I create a custom UIToolbar like component in a UITableViewController?

- by Tony

I have a UITableViewController. I want a "toolbar-ish" component at the bottom. I started by using a background image and a button. In interface builder, I added them to the bottom of the iPhone screen. The problem I ran into was that the background image and button scrolled with the table. I obviously need this fixed at the bottom. Not finding too much direction online, I decided to customize a UIToolbar to look how I want since the position is fixed by default. In my initWithNibName for my UITableViewController, I have: UIImage *shuffleButtonImage = [UIImage imageNamed:@"shuffle_button.png"]; NSArray* toolbarItems = [NSArray arrayWithObjects: [[UIBarButtonItem alloc] initWithImage:shuffleButtonImage style:UIBarButtonItemStylePlain target:self action:@selector(push:)], nil]; [toolbarItems makeObjectsPerformSelector:@selector(release)]; self.toolbarItems = toolbarItems; The problem I am running into now is that the "shuffleButtonImage" is not showing up properly. The shape of the button shows up fine but it is colored white and therefore does not look like the image. Does anyone know why a "white image" would be showing instead of the actual image? Also does it sound like a good idea to customize a UIToolbar or is there a simple way to ensure a fixed position "toolbar-ish" component. To reiterate - my "toolbar-ish" component only needs to be one button at the button of my UITableView. The single button has a gradient color background that I create with an image.

Read the article

Using a custom MvcHttpHandler v2.0 Breaking change from 1.0 to 2.0 ?

- by Myster

Hi I have a site where part is webforms (Umbraco CMS) and part is MVC This is the HttpHandler to deal with the MVC functionality: public class Mvc : MvcHttpHandler { protected override void ProcessRequest(HttpContext httpContext) { httpContext.Trace.Write("Mvc.ashx", "Begin ProcessRequest"); string originalPath = httpContext.Request.Path; string newPath = httpContext.Request.QueryString["mvcRoute"]; if (string.IsNullOrEmpty(newPath)) newPath = "/"; httpContext.Trace.Write("Mvc.ashx", "newPath = "+newPath ); HttpContext.Current.RewritePath(newPath, false); base.ProcessRequest(HttpContext.Current); HttpContext.Current.RewritePath(originalPath, false); } } Full details of how this is implemented here This method works well in an MVC 1.0 website. However when I upgrade this site to MVC 2.0 following the steps in Microsoft's upgrade documentation; everything compiles, except at runtime I get this exception: Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /mvc.ashx Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927 This resource and it's dependencies are found fine in MVC 1.0 but not in MVC 2.0, is there an extra dependency I'd need to add? Is there something I'm missing? Is there a change in the way MVC 2.0 works?

Search Results

Search found 16545 results on 662 pages for 'custom installer'.

Page 190/662 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197 | Next Page >

- by Michal Stefanow

- by artmania

- by Oscar Godson

- by Programming Hero

- by Donal Rafferty

- by Martha

- by raticulin

- by Stuart Helwig

- by Fredrik N

- by Tarun Arora [Microsoft MVP]

- by jehan

- by yinon

- by Geezanansa

- by user291729

- by fernando

- by Arkadius

- by Jeremy Ramos

- by ParadigmShift

- by Pinu

- by niko

- by Mary

- by nont

- by shreya

- by Tony

- by Myster

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197 | Next Page >