Search Results

Search found 6171 results on 247 pages for 'debian installer'.

Page 190/247 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• How do I boot to a windows recovery partition from GRUB in a Toshiba computer?

  - by Andy Groff

  This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

  Read the article

• Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

  - by user76439

  I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

  - by SAM

  Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

  Read the article

• SSD I/O extremely slow installing/booting Ubuntu 12.04

  - by Menda

  These are some useful specs: Macbook Pro 7,1 OWC Mercury Extreme Pro 2,5" SATA SSD (120 GB). Has SandForce driver. Ubuntu 12.04 Desktop 32 bits. One 18 GB partition for GNU/Linux and 1.5 GB for SWAP. MD5 for the Ubuntu install CD is OK. I tried to install Ubuntu. It seems that everything is recognized, but there's a big problem: read and writes to the SSD are extremely slow. For example, the install process, which shouldn't take more than 20 minutes, it takes 7 hours. Then, booting up the computer takes about 20 minutes. I checked and the problem is definitely the SSD. Every access to any file is like 10 times slower than normal. I have tried to format the partition as Ext4 and Ext3 with the same problem. Trying to install other distros like Fedora 17, I have a similar problem. There's a "lag" with the SSD, but not so accused as in Ubuntu. Surprisingly, Debian 6.0 installs and works without any problem. Mac OS works pretty good as well in the other partition, so I discard it's an SSD problem. Thanks for your help!

  Read the article

• Installing Visual Studio 2010 SP1 or Windows Phone tools in your VM (danger!)

  - by Jeff

  If you've read my blog for any amount of time, you probably know that I tend to develop stuff in a Parallels VM on a Mac. It's how I roll. I like VM's because I can trash them and do really stupid things with beta software. That said, there is a pain point that doesn't seem that well documented when it comes to installing stuff in this scenario.The WP7 tools, and SP1 for Visual Studio 2010 (perhaps only if you already have the WP7 tools installed, I'm not sure), do something strange on install. As if it weren't already a long and slow installation, for reasons I don't understand, the installer fires up an instance of Windows Phone Emulator. As you may already know, the emulator doesn't run in a VM, because it is itself a VM, apparently. What it will do is fire up your CPU, make your comprooder hot and make the fans blow harder.I found this out accidentally, as I started the (slow) phone tool installation once, and walked away. An hour and a half later, I came back to find it hadn't finished. But it was hot and the CPU was pegged, so I fired up the task manager to find XDE.exe, the phone emulator, cranking away. I had to kill it several times, and eventually the install finished. It fired up just once in the SP1 install, but it still had the same hanging effect.I can't for the life of me figure out why it does this. In a VM, I can connect the phone to it and use that, so I don't need the emulator. But this install, firing up the emulator, will make it choke until you kill the XDE.exe process. Watch out!

  Read the article

• Error: kernel headers not found. (But they are in place)

  - by Guandalino

  I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

  Read the article

• Impossible quandrary involving UCK, graphics card, and Nvidia drivers

  - by InkBlend

  I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

  Read the article

• How do I partition my Hard drive to install Kubuntu?

  - by Xdflames

  I am a complete newbie to partitioning and I would like some guidance here. Can anyone explain what exactly I should be doing here? I am installing Kubuntu 12.04 on a currently Windows 7 laptop. My current Partitions say this: /dev/sda /dev/sda1 ntfs 104 MB 35 MB /dev/sda2 ntfs 319965 MB 87164 MB Basically, what I want is some guidance on what exactly to do here. All I want is a partition for my OS (Which will be Kubuntu 12.04) and a partition for all of my data. I also want to restart fresh with my hard drive, with only what I mentioned on here. I am installing Kubuntu from a flash drive (I set it up as a bootable device with Universal-USB-Installer-1.9.0.9), as I do not have any blank CDs/DVDs to burn to. What should I name my partitions? What should I set the type as? What size do they need to be? Edit: My hard drive is 320GB. Just looked it up in my BIOS. This computer will mainly be used for internet browsing and overall just messing around with the Linux OS.

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

• Problem running apt-get DPKG broken?

  - by nekochan7

  Problem when runing apt-get debian av # sudo dpkg --configure -a Setting up libgdata2.1-cil (2.2.0.0-2) ... mono: ../nptl/pthread_mutex_lock.c:80: __pthread_mutex_cond_lock: Assertion `mutex->__data.__owner == 0' failed. Native stacktrace: /usr/bin/mono() [0x4ac5a1] /lib/x86_64-linux-gnu/libpthread.so.0(+0xf8f0) [0x7fee2c0e88f0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fee2bd65407] /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fee2bd68508] /lib/x86_64-linux-gnu/libc.so.6(+0x2e516) [0x7fee2bd5e516] /lib/x86_64-linux-gnu/libc.so.6(+0x2e5c2) [0x7fee2bd5e5c2] /lib/x86_64-linux-gnu/libpthread.so.0(+0x113f6) [0x7fee2c0ea3f6] /lib/x86_64-linux-gnu/libpthread.so.0(pthread_cond_wait+0x150) [0x7fee2c0e5140] /usr/bin/mono() [0x6058b3] /usr/bin/mono() [0x5fdd25] /usr/bin/mono() [0x604077] /lib/x86_64-linux-gnu/libpthread.so.0(+0x80ca) [0x7fee2c0e10ca] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7fee2be1605d] Debug info from gdb: ================================================================= Got a SIGABRT while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted mono: ../nptl/pthread_mutex_lock.c:80: __pthread_mutex_cond_lock: Assertion `mutex->__data.__owner == 0' failed. Native stacktrace: /usr/bin/mono() [0x4ac5a1] /lib/x86_64-linux-gnu/libpthread.so.0(+0xf8f0) [0x7fcec8eef8f0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37) [0x7fcec8b6c407] /lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7fcec8b6f508] /lib/x86_64-linux-gnu/libc.so.6(+0x2e516) [0x7fcec8b65516] /lib/x86_64-linux-gnu/libc.so.6(+0x2e5c2) [0x7fcec8b655c2] /lib/x86_64-linux-gnu/libpthread.so.0(+0x113f6) [0x7fcec8ef13f6] /lib/x86_64-linux-gnu/libpthread.so.0(pthread_cond_wait+0x150) [0x7fcec8eec140] /usr/bin/mono() [0x6058b3] /usr/bin/mono() [0x5fdd25] /usr/bin/mono() [0x604077] /lib/x86_64-linux-gnu/libpthread.so.0(+0x80ca) [0x7fcec8ee80ca] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7fcec8c1d05d] Debug info from gdb:

  Read the article

• Printing Off Center or Images Offset After Upgrade to 14.04 LTS (Brother HL-2240)

  - by fortitude

  :) I have a very frustrating problem with my Brother HL-2240 under Ubuntu 14.04. Bear in mind this was working perfectly under Ubuntu 13.10. In Firefox, when I print a webpage, all of the images are off center and cut off, this is a big deal for my work. In Google Chrome, when I print a webpage, the page is off center, toward the right margin. In Opera, when I print a webpage, all of the white areas within the margins are black, using a lot of toner. PDF opened in document viewer, prints off center. Steps I have taken to troubleshoot: 1) Playing with the printer settings, resetting to defaults, etc. 2) Un-installing the Brother driver and re-installing (linux-brprinter-installer-2.0.0-1 from the Brother website), which works perfectly in Ubuntu 13.10. I see a similar, un-answered question, here. Hopefully this question provides some additional clarity to the matter. If anyone would like some additional detail because she or he is willing to help, please let me know. I can scan output from the printer to show you. Thank you.

  Read the article

• htaccess and htpasswd trouble

  - by hjpotter92

  This is the first time that I have ever tried working with .htpasswd and .htaccess files, so please point out my childish works. I have my apache document root set to /www/ on my debian server. Inside it, there's a folder named Logs/ which I want to restrict access using a htpasswd. I created my htpasswd file using the shell's htpasswd command. And this is the result: > user:<encoded password here> > hjp:<encoded password here> > hjpotter92:<encoded password here> I put this file named .htaccess inside /www/. The Logs/ has following htaccess file in it: > AuthName "Restricted Area" > AuthType Basic > AuthUserFile /www/.htpasswd > AuthGroupFile /dev/null > require valid-user This was again created using an online tool(I forgot its name/link, and can't search the browser-history now). The problem, as it might've already struck you is that I am experiencing no change on my Logs folder access. The folder is still accessible to everyone. I am running apache as root user(if that matters/helps). Please help/guide me. I've tried reading some htaccess guides and have followed some of older SO questions, but still haven't figured out a way to restrict access to Logs folder with a password.

  Read the article

• Cannot establish ssh connection to computer on local network

  - by ovangle

  I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

  Read the article

• WordPress mod_rewrite redirect specific folders

  - by Ps Cjef

  As a new user, I'm not allowed to post more than two hyperlinks here. So I have added a space after every http (ignore them and read as full URLs). System: Debian Etch, Apache 2.2 I have a WordPress instance with multiple blogs. I would like to redirect some of the folders based on the year and month, while leaving other folders go to the actual locations. Example: I have archives for a few years, like 2010, 2011 and 2012: http ://mydomain.com/wordpress/myblog/2010/02 http ://mydomain.com/wordpress/myblog/2011/01 http ://mydomain.com/wordpress/myblog/2012/01 I would like to redirect all 2010 and 2011 posts to another blog with the same folder structure: http ://mydomain.com/wordpress/myotherblog/2010/02 http ://mydomain.com/wordpress/myotherblog/2011/01 and so on. I would like to have 2012 and beyond to go to the actual site (http ://mydomain.com/wordpress/myblog/2012/01). I tried mod_rewrite with the following, one rule at a time to test redirection for just one year (and to expand later for other years), and none of them worked! * RewriteEngine is already on since there are some default WordPress rewrites. * RewriteBase is set to http://mydomain.com/wordpress/ . * I put my rule before all the other default WordPress rules are processed. Didn't work solution #1 RedirectMatch 301 /myblog/2010/(.*) /myotherblog/2010/$1 Didn't work solution #2 RewriteRule /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 [R=301] Didn't work solution #3 RedirectPermanent /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 I've also tried the above rules with and without a fully qualified URL for the new location. The rewrite log, with log level set to 9, did not provide any useful information. It shows that it looks at the pattern specified against the URL (as mentioned in the rule), but finally what happens is a passthrough to http ://mydomain.com/myblog/ for all URLs or a 500 Internal Server Error. Any ideas on where I could be going wrong or any alternative solutions?

  Read the article

• If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

  - by Jay

  I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

  Read the article

• How to Install Broadcom Wireless Drivers (BCM43xx)

  - by Fer1805

  I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

  Read the article

• Problems to boot, Ubuntu entry does not work anymore

  - by user104108

  A few months I decided to install Ubuntu 12.04 on my PC alongside with my Windows 7 partition. In order to do that and avoid any mistake, I followed these steps: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/2/ Everything was going well until I decided to update to the 12.10 realese. I don't know what happened, but after I updated my Ubuntu, it stoped working, it didn't even launched, when I turned on my pc and choose to run "Ubuntu 12.04" on the Grub Screen, a weird messaged appeared. Well, so I decided to install the Ubuntu 12.10 and forget about the 12.04 partition, no problem. I erased the partitions used for the Ubuntu 12.04 with EaseUS partition Manager. However, when I start my PC, there is still the option of "Ubuntu 12.04" to chose, is that bad? And what about now, can I use the Windows Installer of Ubuntu ( http://www.ubuntu.com/download/help/install-ubuntu-with-windows ) to install the Ubuntu 12.10 ? What should I do to have Ubuntu 12.10 and Windows 7 in dual boot again? Thanks; Thales.

  Read the article

• How to customize live Ubuntu CD?

  - by karthick87

  I would like to customize Ubuntu live CD by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Thanks in advance! Customization Packages that I want to install: Thunderbird Samba SSH Changes that I need: Remove Games menu from the Application menu Firefox shortcut on desktop Radiance as the default theme Different default Ubuntu wallpaper Note I do not prefer Remastersys, manual way will be appreciated. updates I want the panel to be placed at the bottom. I want to paste my samba configuration file instead of default samba configuration. And i have few firefox shortcuts and Folders, i have to show that in Desktop. Also it will be nice if you say me how to change the icon sets. Recent Updates I have customized ubuntu 10.10 with firefox shortcuts and few folders on desktops. Everything went smooth. But the installer gets crashes after choosing the timezone. How do i fix this issue? Also setting wallpaper affects the login screen. The wallpaper which i set is displayed on the login screen also. I just want the default one for the login screen.

  Read the article

• Changing the Default Install Location of an MSI

  - by PSteele

  A few months ago, I had to tweak an MSI installer.  It was installing into a specific directory (named the same as the application) underneath Program Files.  Since the location of Program Files can change from machine to machine, the MSI has a special token you can use for Program Files (as well as for the application name).  So the current value for “DefaultLocation” of the Application Folder was: [ProgramFilesFolder]\[ProductName] During installation, these tokens would be replaced by the actual location based on the current machine. I needed to change this to a specific folder underneath the users My Documents directory.  I poked around the help file and I could not find where these special tokens (like “[ProgramFilesFolder]”) were defined.  Obviously, there must be some specific set of values that are available and I’m sure My Documents is one of them. I finally found them documented so I’m posting the link here.  Hopefully, it will help someone else out.  Not sure where I found this link… System Folder Properties For me, it was as easy as changing the DefaultLocation to: [PersonalFolder]\MyToolName\Application Technorati Tags: .NET,MSI

  Read the article

• How to modify partitions after install?

  - by ChocoDeveloper

  I wanted to have Ubuntu with full disk encryption on one big partition, and Windows on a small one. In 12.04, only the Server Edition installer has full disk encryption, so I used that and then installed ubuntu-desktop. When it asked for the size, I reduced it from ~999GB to ~750gb. Now after the install, on both gparted and disk utility I see /dev/sda2 taking ~931GB, and nothing unallocated, so I can't create a partition for windows. I got the size right, because when I right-click inside a folder, then hit 'properties', I see Free space: ~690GB (I don't know why it's not ~750GB, but at least it's not 900). The command df -h shows the same. So what can I do? Normally I would just resize a partition with gparted to create unallocated space, then create the partition. But here I have two problems: gparted does not seem to be showing the correct values, and also it says it does not support LUKS so I'm afraid it will mess things up. Any thoughts?

  Read the article

• 11.10 system crashes for no apparent reason [closed]

  - by varanoid

  I'm relatively new to Linux, and while I know a fair amount about computers and programming, it certainly isn't my specialty. I have a dual boot with Windows 7, and it has been working very well for me until recently. Just randomly the computer will freeze. The last time I was smart enough to keep the System Monitor open when it happened, and it looks like at the time of freezing "bash" and a bunch of other processes that I don't recognize seem to have flooded the memory. So it looks like my memory is getting overloaded and this is what is crashing the system, but I honestly have no idea what could be doing it. Generally I have a bunch of programs running, but they don't take much RAM or CPU: Transmission, Libre Office Writer, Firefox, Empathy, and Banshee. Sometimes I also have Text Editor and Terminal open, but it crashes regardless. When it crashes, it seems that all of the programs are working fine but things like windows, the taskbar, and operations like Alt+Tab just stop working properly or at all. Sometimes the mouse and keyboard freeze and I have to power off manually. Other than that I don't know what the problem is. The only irregularity I've experienced is that I can't download "Debian package management system" even though other updates download fine.

  Read the article

• ubuntu live cd start up error

  - by Emiel

  First off, I'm new to the Linux scene. This is my first attempt to make a single boot installation for Ubuntu. I tried it for a few days in dual boot with win7 and I was sold, so i removed the tumor my pc had to endure for so long (sorry laptop) and installed Ubuntu from an usb boot device. My dual boot was as follows: Windows 7 was installed on partition C from hdd1, the windows installer for Ubuntu installed Ubuntu on partition I on that same hdd, hdd1. In the live cd installation I did the normal execution for removing windows and it said that after the installation my partition would be 320gb big, that is the total size of my hdd, so I automatically assumed that it would format my whole hdd. Now the installation has completed and it tells me to restart my system, and here comes the problem: now I get a dashing white cursor on my screen after the BIOS load and it won't budge... it just stands there and it doesn't move on or load Ubuntu, the system gets very hot at this point... Then I tried to reinstall using the same live CD, it is still on my USB drive, but when I boot from the USB, I get the error: no such file with some address and the a grub rescue. What to do? I can get hold of a win7 copy, but I don't really want to use that crap again... Thanks for helping me out. Kind regards, Emiel

  Read the article

• Laptop, unable to install discrete graphics card GTX 880M

  - by FoxyShadoww

  So I've bought the GT70 2PE Dominator Pro a few weeks ago and I installed Zorin OS 9 Ultimate on it. Today I tried to install the Nvidia drivers on my laptop since it has the GTX 880M, but my system became unbootable. Can anyone help me with this issue? I will write down what I've tried so far. This is what I've tried so far: Downloaded the newest Nvidia drivers from their website. Pressed CTRL+ALT+F2 to open the terminal page thingy. Logged in and got root access. Stopped the lightdm service. Ran the NVIDIA-Linux-x86_64-340.32.run installer. Pressed the accept button and right after that it told me the following message: The distribution-provided pre-install script failed! Continue installation anyway?. When I install anyway, it will crash my system and makes it unbootable, Does anyone know how to use my GTX 880M? Do I need to enable it on boot time somehow? Thanks for the support, Sapphire ~

  Read the article

• How do I boot to a windows recovery partition from GRUB on a Toshiba computer?

  - by Andy Groff

  This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >