Search Results

Search found 6234 results on 250 pages for 'exposed filter'.

Page 190/250 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• How to Increase the VMWare Boot Screen Delay

  - by Trevor Bekolay

  If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

  Read the article

• How to set conditional activation to taskflows?

  - by shantala.sankeshwar(at)oracle.com

  This article describes implementing conditional activation to taskflows.Use Case Description Suppose we have a taskflow dropped as region on a page & this region is enclosed in a popup .By default when the page is loaded the respective region also gets loaded.Hence a region model needs to provide a viewId whenever one is requested.  A consequence of this is the TaskFlowRegionModel always has to initialize its task flow and execute the task flow's default activity in order to determine a viewId, even if the region is not visible on the page.This can lead to unnecessary performance overhead of executing task flow to generate viewIds for regions that are never visible. In order to increase the performance,we need to set the taskflow bindings activation property to 'conditional'.Below described is a simple usecase that shows how exactly we can set the conditional activations to taskflow bindings.Steps:1.Create an ADF Fusion web ApplicationView image 2.Create Business components for Emp tableView image3.Create a view criteria where deptno=:some_bind_variableView image4.Generate EmpViewImpl.java file & write the below code.Then expose this to client interface.    public void filterEmpRecords(Number deptNo){            // Code to filter the deptnos         ensureVariableManager().setVariableValue("some_bind_variable",  deptNo);        this.applyViewCriteria(this.getViewCriteria("EmpViewCriteria"));        this.executeQuery();       }5.Create an ADF Taskflow with page fragements & drop the above method on the taskflow6.Also drop the view activity(showEmp.jsff) .Define control flow case from the above method activity to the view activity.Set the method activity as default activityView image7.Create  main.jspx page & drop the above taskflow as region on this pageView image8.Surround the region with the dialog & surround the dialog with the popup(id is Popup1)9.Drop the commandButton on the above page & insert af:showPopupBehavior inside the commandButton:<af:commandButton text="show popup" id="cb1"><af:showPopupBehavior popupId="::Popup1"/></af:commandButton>10.Now if we execute this main page ,we will notice that the method action gets called even before the popup is launched.We can avoid this this by setting the activation property of the taskflow to conditional11.Goto the bindings of the above main page & select the taskflow binding ,set its activation property to 'conditional' & active property to Boolean value #{Somebean.popupVisible}.By default its value should be false.View image12.We need to set the above Boolean value to true only when the popup is launched.This can be achieved by inserting setPropertyListener inside the popup:<af:setPropertyListener from="true" to="#{Somebean.popupVisible}" type="popupFetch"/>13.Now if we run the page,we will notice that the method action is not called & only when we click on 'show popup' button the method action gets called.

  Read the article

• Oracle Fusion Middleware Innovation Award Winners 2012: ADF & Fusion Development

  - by Dana Singleterry

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Fusion Middleware Innovation Awards honor customers for their cutting-edge solutions using Oracle Fusion Middleware. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. The awards were presented during Oracle OpenWorld 2012 and following winners are for the category of ADF & Fusion Development. Micros – an OPN Platinum partner – has been working closely with Oracle product management teams in applying industry best practices in the development of their solutions. Their current application suite for the hospitality industry was built on Oracle Forms and the Oracle database running on MS Windows. The next generation of this suite is being developed and released in modules that are now based on Oracle FMW (including ADF) 11g technologies and Oracle Database 11g all running on Oracle Linux. The primary driver was that of modernization and hence the reason Oracle ADF was selected to provide a rich UI for business processes that could be served up through traditional methods or through mobile devices globally. SOA Suite & ADF allowed for loosely-coupled services that could evolve with the needs of the business. Micros's application innovations includes the use of business application portlets that have been published from ADF Faces Task Flows generated using WebCenter portlet libraries  & Oracle Metadata Services (MDS) with multi-layered customizations using Oracle WebCenter Composer. PCS (Marfin Egnatia Bank of Greece) – PCS Wealth Management is a WM Software Solution, which captures and automates the WM business processes allowing Service Providers to allocate enough time and effort into Customer Service and Investment Strategies, under Advisory or Execution-Only Services. The Product is built upon the latest Web Technologies and ensures Best Practices covering all functional expectations, meeting local regulatory requirements and discovering successful opportunities for the WM Customers' Portfolios. The new unified Wealth Management system offers an unparalleled User Interface taking full advantage of the user friendly ADF Faces Components to a great extent, all serving Private Banking purposes. The application offers a true Account Officer Cockpit with shallow navigation, one-click access to informed decisions and a perfect customer service. ADF Grids and Pivots, the Data Visualization Components, as well as the Calendar and Map Components are cleverly used to help the user eliminate the usage of Excel, Outlook and other systems. PCS's application is unique in the way it leverages the ADF Faces data visualization components to create a truly attractive and insightful dashboard for their application. PCS Wealth Management Demo Qualcomm – Qualcomm, a $17B per year company, designs and sells semiconductor products for wireless telecommunications, mobile and computing markets. In addition, Qualcomm companies provide various hardware and software products to facilitate the design, development and deployment of phones and the applications that run on them. Qualcomm’s challenge has been to not only develop and deploy new business system functions to keep pace with customer demand, but also to provide a customer collaboration capability that is sufficiently robust, easy to use, and flexible to meet emerging and future needs. Qualcomm has taken successful steps in building and deploying the customer engagement platform Ieveraging various Oracle technologies including Fusion Middleware (ADF, SOA, OBIEE) and their proven ERP foundation of EBS and 11g databases. The new platform delivers a more unified and “seamless” business solution with a consistent, modern “look and feel” all based on standard business processes which facilitate efficient collaboration with Qualcomm and its customers. The look and feel leverages ADF in innovative ways and includes hover over navigation, custom pagination components, and skinning. Qualcomm has exposed a services layer that provides significant functionality including order-to-ship, quote-to-order, customer on-boarding and contract validation. Qualcomm's creative designs leverage Oracle's SOA Suite to integrate with Oracle EBS and desperate applications to provide a rich user interface through the use use of Oracle ADF Faces Rich Client Components providing a self-service solution to their customers.

  Read the article

• NTFS Issues in Windows 7 and 2008 R2 - 'Is it a Bug?'

  - by renewieldraaijer

  I have been using the various versions of the Microsoft Windows product line since NT4 and I really thought I knew the ins and outs about the NTFS filesystem by now. There were always a few rules of thumb to understand what happens if you move data around. These rules were: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. The same goes for moving data between disk partitions. Only when you move data within the same partition, the permissions are kept."  Recently I was asked to assist in troubleshooting some NTFS related issues. This forced me to have another good look at this theory. To my surprise I found out that this theory does not completely stand anymore. Apparently some things have changed since the release of Windows Vista / Windows 2008. Since the release of these Operating Systems, a move within the same disk partition results in the data inheriting the permissions of the location it is being copied into. A major change in the NTFS filesystem you would think!  Not quite! The above only counts when the move operation is being performed by using Windows Explorer. A move by using the 'move' command from within a cmd prompt for example, retains the NTFS permissions, just like before in Windows XP and older systems. Conclusion: The Windows Explorer is responsible for changing the ACL's of the moved data. This is a remarkable change, but if you follow this theory, the resulting ACL after a move operation is still predictable.  We could say that since Windows Vista and Windows 2008, a new rule set applies: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. Same goes for moving data between disk partitions and within disk partitions. Only when you move data within the same partition by using something else than the Windows Explorer, the permissions are kept." The above behavior should be unchanged in Windows 7 / Windows 2008 R2, compared to Windows Vista / 2008. But somehow the NTFS permissions are not so predictable in Windows 7 and Windows 2008 R2. Moving data within the same disk partition the one time results in the permissions being kept and the next time results in inherited permissions from the destination location. I will try to demonstrate this in a few examples: Example 1 (Incorrect behavior): Consider two folders, 'Folder A' and 'Folder B' with the following permissions configured.                    Now we create the test file 'test file 1.txt' in 'Folder A' and afterwards move this file to 'Folder B' using Windows Explorer.                       According to the new theory, the file should inherit the permissions of 'Folder B' and therefore 'Group B' should appear in the ACL of 'test file 1.txt'. In the screenshot below the resulting permissions are displayed. The permissions from the originating location are kept, while the permissions of 'Folder B' should be inherited.                   Example 2 (Correct behavior): Again, consider the same two folders. This time we make a small modification to the ACL of 'Folder A'. We add 'Group C' to the ACL and again we create a file in 'Folder A' which we name 'test file 2.txt'.                    Next, we move 'test file 2.txt' to 'Folder B'.                       Again, we check the permissions of 'test file 2.txt' at the target location. We can now see that the permissions are inherited. This is what should be happening, and can be considered 'correct behavior' for Windows Vista / 2008 / 7 / 2008 R2. It remains uncertain why this behavior is so inconsistent. At this time, this is under investigation with Microsoft Support. The investigation has been going for the last two weeks and it is beginning to look like there is no rational reason for this, other than a bug in the Windows Explorer in Windows 7 and 2008 R2. As soon as there is any certainty on this, I will note it here in this blog.                   The examples above are harmless tests, by using my own laptop. If you would create the same set of folders and groups, and configure exactly the same permissions, you will see exactly the same behavior. Be sure to use Windows 7 or Windows 2008 R2.   Initially the problem arose at a customer site where move operations on data on the fileserver by users would result in unpredictable results. This resulted in the wrong set of people having àccess permissions on data that they should not have permissions to. Off course this is something we want to prevent at all costs.   I have also done several tests with move operations by using the move command in a cmd prompt. This way the behavior is always consistent. The inconsistent behavior is only exposed when using the Windows Explorer to initiate the move operation, and only when using Windows 7 or Windows 2008 R2 systems. It is evident that this behavior changes when the ACL of a folder has been changed, for example by adding an extra entry. The reason for this remains uncertain though. To be continued…. A dutch version of this post can be found at: http://blogs.platani.nl/?p=612

  Read the article

• Enable Thumbnail Previews for Firefox in Windows 7 Taskbar

  - by Asian Angel

  Are you tired of waiting for the official activation of Taskbar Thumbnail Previews in Firefox? See how easy it is to enable them now with a simple about:config hack. Note: We have briefly covered this before but present it here in a more detailed format. Before For our example we opened all of the websites in the HTG Network in tabs… When hovering over the Firefox Icon in the Taskbar, you only see the one thumbnail. There are two things in particular to notice here: 1.) The Tab Bar for Firefox is displayed with all four tabs visible in the Thumbnail Preview  2.) The “Taskbar Icon” itself is displaying as singular with no “fanned edge” on the right side. Hack the About:Config Settings To get the Thumbnail Previews working you will need to make a modification in the about:config settings. Type about:config in the Address Bar and press Enter. Unless you have previously disabled the warning you will see this message after pressing Enter. Click on the I promise! Button to finish entering the settings. In the Filter Address Bar either type or copy and paste the following about:config entry: browser.taskbar.previews.enable After you enter that in, you should see the entry listing as shown here. At this point there are two methods that you can choose to alter the entry. The first method is to right click on the entry and select Toggle and the second method is to double click on the entry. Both work equally well…choose the method that you like best. Once the about:config entry has been changed, you will need to restart Firefox for it to take effect. After restarting Firefox on our system the Thumbnail Previews were definitely looking very nice. Notice that the Tab Bar is no longer displayed in the Thumbnail Previews. The Taskbar Icon also had a “fanned edge” indicating that multiple tabs were open. Conclusion If you are tired of waiting for Mozilla to officially activate Taskbar Thumbnail Previews in Firefox, then you can go ahead and start enjoying them now. For more great Firefox 3.6.x about:config hacks read our article here. Similar Articles Productive Geek Tips Vista Style Popup Previews for Firefox TabsDisable IE 8 Thumbnail Previews on Windows 7 TaskbarIncrease the size of Taskbar Preview Thumbnails in Windows 7Workaround for Vista Taskbar Thumbnail Previews Not Showing CorrectlyDisable Thumbnail Previews in Windows 7 or Vista Explorer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp

  Read the article

• Some of my favourite Visual Studio 2012 things&ndash;Teams

  - by Aaron Kowall

  Getting the balance right for when and how many team projects to create has always been a bit of a balance.  On large initiatives, there are often teams who work toward a common system.  These teams often have quite a bit of autonomy, but need to roll up to some higher level initiative.  In TFS 2010, people were often tempted to create separate Team Projects for each of the sub-teams and then do some magic with reporting and cross-team queries to get the consolidated view.  My recommendation was always to use Areas as a means of separating work across the team, but that always resulted in a large number of queries that need to be maintained and just seemed confusing.  When doing anything you had to remember to filter the query or view by Area in order to get correct results. Along with the awesome web access portal that comes in TFS 2012 (which I will cover details of in another post) the product group has introduced the concept of Teams.  A team is a sub-group within a TFS 2012 Team Project which allows us to more easily divide work along team boundaries. Technically, a Team is defined by an Area Path and a TFS Group, both of which could be done in TFS 2012.  However, by allowing for creation of a ‘Team’ in TFS 2012, the web portal is able to do a bunch of ‘magic’ for us.  We can view the project site (backlog, taskboard, etc) for the the team, we can assign items to the team and we can view the burndown for the team.  Basically, all the stuff that we had to prepare manually we now get created and managed for us with a nice UI. When you create a Team Project in TFS 2012, a ‘Default’ team is created with the same name as the Team Project.  So, if you only have 1 team working on the project, you are set.  If you want to divide the work into additional teams, you can create teams by using the Team Web Client. Teams are created using the ‘Administer Server’ icon in the top right of the web site.   You can select the team site by using the team chooser: Once you have selected a team, the Product Backlog, TaskBoard, Burndown Charts, etc. are all filtered to that team. NOTE: You always have the ability to choose the ‘Default’ team to see items for the entire project. PS: It’s been a long while since I shared on this blog.  To help with that I’m in a blogging challenge with some other developer and agilist friends.  Please check out their blogs as well: Steve Rogalsky: http://winnipegagilist.blogspot.ca Dylan Smith: http://www.geekswithblogs.net/optikal Tyler Doerkson: http://blog.tylerdoerksen.com David Alpert: http://www.spinthemoose.com Dave White: http://www.agileramblings.com   Technorati Tags: TFS 2012,Agile,Team

  Read the article

• Maintaining Revision Levels

  - by kyle.hatlestad

  A question that came up on an earlier blog post was how to limit the number of revisions on a piece of content. UCM does not inherently enforce any sort of limit on how many revisions you can have. It's unlimited. In some cases, there may be content that goes through lots of changes, but there just simply isn't a need to keep all of its revisions around. Deleting those revisions through the content information screen can be very cumbersome. And going through the Repository Manager applet can take time as well to filter and find the revisions to get rid of. But there is an easier way through the Archiver. The Export Query criteria in Archiver includes a very handy field called 'Revision Rank'. With revision labels, they typically go up as new revisions come in (e.g. 1, 2, 3, 4, etc...). But you can't really use this field to tell it to keep the top 5 revisions. Those top 5 revision numbers are always going up. But revision rank goes the opposite direction. The very latest revision is always 0. The previous revision to that is 1. Previous revision to that is 2. And so on and so forth. With revision rank, you can set your query to look for any Revision Rank greater or equal to 5. Now as older revisions move down the line, their revision rank gets higher and higher until they reach that threshold. Then when you run that archive export, you can choose to delete and remove those revisions. Running that export in Archiver is normally a manual process. But with Idc Command, you can script the process and have it run automatically from the server. Idc Command is a utility that allows you to run any of the content server services via the command line. You basically feed it a text file with the services and parameters defined along with the user to run it as. The Idc Command executable is located within the \bin\ directory: $ ./IdcCommand -f DeleteOlderRevisions.txt -u sysadmin -l delete_revisions.log In this example, our IdcCommand file to run the export and do the deletions would look like: IdcService=EXPORT_ARCHIVE aArchiveName=DeleteOlderRevisions aDoDelete=1 IDC_Name=idc dataSource=RevisionIDs <<EOD>> You can then use automated scheduling routines in the OS to run the command and command file at the frequency needed. Remember that you are deleting the revisions from within UCM, but they are still getting placed within the archive. So you will need to delete those batches to have them fully removed (or re-import if you need to recover them). For more information about Idc Command, you can find that in the Idc Command Reference Guide.

  Read the article

• What micro web-framework has the lowest overhead but includes templating

  - by Simon Martin

  I want to rewrite a simple small (10 page) website and besides a contact form it could be written in pure html. It is currently built with classic asp and Dreamweaver templates. The reason I'm not simply writing 10 html pages is that I want to keep the layout all in 1 place so would need either includes or a masterpage. I don't want to use Dreamweaver templates, or batch processing (like org-mode) because I want to be able to edit using notepad (or Visual Studio) because occasionally I might need to edit a file on the server (Go Daddy's IIS admin interface will let me edit text). I don't want to use ASP.NET MVC or WebForms (which I use in my day job) because I don't need all the overhead they bring with them when essentially I'm serving up 9 static files, 1 contact form and 1 list of clubs (that I aim to use jQuery to filter). The shared hosting package I have on Go Daddy seems to take a long time to spin up when serving aspx files. Currently the clubs page is driven from an MS SQL database that I try to keep up to date by manually checking the dojo locator on the main HQ pages and editing the entries myself, this is again way over the top. I aim to get a text file with the club details (probably in JSON or xml format) and use that as the source for the clubs page. There will need to be a bit of programming for this as the HQ site is unable to provide an extract / feed so something will have to scrape the site periodically to update my clubs persistence file. I'd like that to be automated - but I'm happy to have that triggered on a visit to the clubs page so I don't need to worry about scheduling a job. I would probably have a separate process that updates the persistence that has nothing to do with the rest of the site. Ideally I'd like to use Mercurial (or git) to publish, I know Bitbucket (and github) both serve static page sites so they wouldn't work in this scenario (dynamic pages and a contact form) but that's the model I'd like to use if there is such a thing. My requirements are: Simple templating system, 1 place to define header, footers, menu etc., that can be edited using just notepad. Very minimal / lightweight framework. I don't need a monster for 10 pages Must run either on IIS7 (shared Go Daddy Windows hosting) or other free host

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 25 (sys.dm_db_missing_index_details)

  - by Tamarick Hill

  The sys.dm_db_missing_index_details Dynamic Management View is used to return information about missing indexes on your SQL Server instances. These indexes are ones that the optimizer has identified as indexes it would like to use but did not have. You may also see these same indexes indicated in other tools such as query execution plans or the Database tuning advisor. Let’s execute this DMV so we can review the information it provides us. I do not have any missing index information for my AdventureWorks2012 database, but for the purposes of illustrating the result set of this DMV, I will present the results from my msdb database. SELECT * FROM sys.dm_db_missing_index_details The first column presented is the index_handle which uniquely identifies a particular missing index. The next two columns represent the database_id and the object_id for the particular table in question. Next is the ‘equality_columns’ column which gives you a list of columns (comma separated) that would be beneficial to the optimizer for equality operations. By equality operation I mean for any queries that would use a filter or join condition such as WHERE A = B. The next column, ‘inequality_columns’, gives you a comma separated list of columns that would be beneficial to the optimizer for inequality operations. An inequality operation is anything other than A = B. For example, “WHERE A != B”, “WHERE A > B”, “WHERE A < B”, and “WHERE A <> B” would all qualify as inequality. Next is the ‘included_columns’ column which list all columns that would be beneficial to the optimizer for purposes of providing a covering index and preventing key/bookmark lookups. Lastly is the ‘statement’ column which lists the name of the table where the index is missing. This DMV can help you identify potential indexes that could be added to improve the performance of your system. However, I will advise you not to just take the output of this DMV and create an index for everything you see. Everything listed here should be analyzed and then tested on a Development or Test system before implementing into a Production environment. For more information on this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms345434.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• SPARC M7 Chip - 32 cores - Mind Blowing performance

  - by Angelo-Oracle

  The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested  these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology  this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th.  The S4 core  The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data.  User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters  The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share  L2 cache.  All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance.  The Chip  Each  M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is  8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers.  Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM.  Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program.  The M7  has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data.  Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS.  M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines.  These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries.  SPARC Accelerated Program  At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program. 

  Read the article

• Creating a Reverse Proxy with URL Rewrite for IIS

  - by OWScott

  There are times when you need to reverse proxy through a server. The most common example is when you have an internal web server that isn’t exposed to the internet, and you have a public web server accessible to the internet. If you want to serve up traffic from the internal web server, you can do this through the public web server by creating a tunnel (aka reverse proxy). Essentially, you can front the internal web server with a friendly URL, even hiding custom ports. For example, consider an internal web server with a URL of http://10.10.0.50:8111. You can make that available through a public URL like http://tools.mysite.com/ as seen in the following image. The URL can be made public or it can be used for your internal staff and have it password protected and/or locked down by IP address. This is easy to do with URL Rewrite and IIS. You will also need Application Request Routing (ARR) installed even though for a simple reverse proxy you won’t use most of ARR’s functionality. If you don’t already have URL Rewrite and ARR installed you can do so easily with the Web Platform Installer. A lot can be said about reverse proxies and many different situations and ways to route the traffic and handle different URL patterns. However, my goal here is to get you up and going in the easiest way possible. Then you can dig in deeper after you get the base configuration in place. URL Rewrite makes a reverse proxy very easy to set up. Note that the URL Rewrite Add Rules template doesn’t include Reverse Proxy at the server level. That’s not to say that you can’t create a server-level reverse proxy, but the URL Rewrite rules template doesn’t help you with that. Getting Started First you must create a website on your public web server that has the public bindings that you need. Alternately, you can use an existing site and route using conditions for certain traffic. After you’ve created your site then open up URL Rewrite at the site level. Using the “Add Rule(s)…” template that is opened from the right-hand actions pane, create a new Reverse Proxy rule. If you receive a prompt (the first time) that the proxy functionality needs to be enabled, select OK. This is telling you that a proxy can route traffic outside of your web server, which happens to be our goal in this case. Be aware that reverse proxy rules can be dangerous if you open sites from inside you network to the world, so just be aware of what you’re doing and why. The next and final step of the template asks a few questions. The first textbox asks the name of the internal web server. In our example, it’s 10.10.0.50:8111. This can be any URL, including a subfolder like internal.mysite.com/blog. Don’t include the http or https here. The template assumes that it’s not entered. You can choose whether to perform SSL Offloading or not. If you leave this checked then all requests to the internal server will be over HTTP regardless of the original web request. This can help with performance and SSL bindings if all requests are within a trusted network. If the network path between the two web servers is not completely trusted and safe then uncheck this. Next, the template enables you to create an outbound rule. This is used to rewrite links in the page to look like your public domain name rather than the internal domain name. Outbound rules have a lot of CPU overhead because the entire web content needs to be parsed and updated. However, if you need it, then it’s well worth the extra CPU hit on the web server. If you check the “Rewrite the domain names of the links in HTTP responses” checkbox then the From textbox will be filled in with what you entered for the inbound rule. You can enter your friendly public URL for the outbound rule. This will essentially replace any reference to 10.10.0.50:8111 (or whatever you enter) with tools.mysite.com in all <a>, <form>, and <img> tags on your site. That’s it! Well, there is a lot more that you can do, this but will give you the base configuration. You can now visit www.mysite.com on your public web server and it will serve up the site from your internal web server. You should see two rules show up; one inbound and one outbound. You can edit these, add conditions, and tweak them further as needed. One common issue that can occur without outbound rules has to do with compression. If you run into errors with the new proxied site, try turning off compression to confirm if that’s the issue. Here’s a link with details on how to deal with compression and outbound rules. I hope this was helpful to get started and to see how easy it is to create a simple reverse proxy using URL Rewrite for IIS.

  Read the article

• Persisting settings without using Options dialog in Visual Studio

  - by Utkarsh Shigihalli

  Originally posted on: http://geekswithblogs.net/onlyutkarsh/archive/2013/11/02/persisting-settings-without-using-options-dialog-in-visual-studio.aspxIn one of my previous blog post we have seen persisting settings using Visual Studio's options dialog. Visual Studio options has many advantages in automatically persisting user options for you. However, during our latest Team Rooms extension development, we decided to provide our users; ability to use our preferences directly from Team Explorer. The main reason was that we had only one simple option for user and we thought it is cumbersome for user to go to Tools –> Options dialog to change this. Another reason was, we wanted to highlight this setting to user as soon as he is using our extension.   So if you are in such a scenario where you do not want to use VS options window, but still would like to persist the settings, this post will guide you through. Visual Studio SDK provides two ways to persist settings in your extensions. One is using DialogPage as shown in my previous post. Another way is to use by implementing IProfileManager interface which I will explain in this post. Please note that the class implementing IProfileManager should be independent class. This is because, VS instantiates this class during Tools –> Import and Export Settings. IProfileManager provides 2 different sets of methods (total 4 methods) to persist the settings. They are LoadSettingsFromXml and SaveSettingsToXml – Implement these methods to persist settings to disk from VS settings storage. The VS will persist your settings along with other options to disk. LoadSettingsFromStorage and SaveSettingsToStorage – Implement these methods to persist settings to local storage, usually it be registry. VS calls LoadSettingsFromStorage method when it is initializing the package too. We are going to use the 2nd set of methods for this example. First, we are creating a separate class file called UserOptions.cs. Please note that, we also need to implement IComponent, which can be done by inheriting Component along with IProfileManager. [ComVisible(true)] [Guid("XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX")] public class UserOptions : Component, IProfileManager { private const string SUBKEY_NAME = "TForVS2013"; private const string TRAY_NOTIFICATIONS_STRING = "TrayNotifications"; ... } Define the property so that it can be used to set and get from other classes. public bool TrayNotifications { get; set; } Implement the members of IProfileManager. public void LoadSettingsFromStorage() { RegistryKey reg = null; try { using (reg = Package.UserRegistryRoot.OpenSubKey(SUBKEY_NAME)) { if (reg != null) { // Key already exists, so just update this setting. TrayNotifications = Convert.ToBoolean(reg.GetValue(TRAY_NOTIFICATIONS_STRING, true)); } } } catch (TeamRoomException exception) { TrayNotifications = true; ExceptionReporting.Report(exception); } finally { if (reg != null) { reg.Close(); } } } public void LoadSettingsFromXml(IVsSettingsReader reader) { reader.ReadSettingBoolean(TRAY_NOTIFICATIONS_STRING, out _isTrayNotificationsEnabled); TrayNotifications = (_isTrayNotificationsEnabled == 1); } public void ResetSettings() { } public void SaveSettingsToStorage() { RegistryKey reg = null; try { using (reg = Package.UserRegistryRoot.OpenSubKey(SUBKEY_NAME, true)) { if (reg != null) { // Key already exists, so just update this setting. reg.SetValue(TRAY_NOTIFICATIONS_STRING, TrayNotifications); } else { reg = Package.UserRegistryRoot.CreateSubKey(SUBKEY_NAME); reg.SetValue(TRAY_NOTIFICATIONS_STRING, TrayNotifications); } } } catch (TeamRoomException exception) { ExceptionReporting.Report(exception); } finally { if (reg != null) { reg.Close(); } } } public void SaveSettingsToXml(IVsSettingsWriter writer) { writer.WriteSettingBoolean(TRAY_NOTIFICATIONS_STRING, TrayNotifications ? 1 : 0); } Let me elaborate on the method implementation. The Package class provides UserRegistryRoot (which is HKCU\Microsoft\VisualStudio\12.0 for VS2013) property which can be used to create and read the registry keys. So basically, in the methods above, I am checking if the registry key exists already and if not, I simply create it. Also, in case there is an exception I return the default values. If the key already exists, I update the value. Also, note that you need to make sure that you close the key while exiting from the method. Very simple right? Accessing and settings is simple too. We just need to use the exposed property. UserOptions.TrayNotifications = true; UserOptions.SaveSettingsToStorage(); Reading settings is as simple as reading a property. UserOptions.LoadSettingsFromStorage(); var trayNotifications = UserOptions.TrayNotifications; Lastly, the most important step. We need to tell Visual Studio shell that our package exposes options using the UserOptions class. For this we need to decorate our package class with ProvideProfile attribute as below. [ProvideProfile(typeof(UserOptions), "TForVS2013", "TeamRooms", 110, 110, false, DescriptionResourceID = 401)] public sealed class TeamRooms : Microsoft.VisualStudio.Shell.Package { ... } That's it. If everything is alright, once you run the package you will also see your options appearing in "Import Export settings" window, which allows you to export your options.

  Read the article

• List of Commonly Used Value Types in XNA Games

  - by Michael B. McLaughlin

  Most XNA programmers are concerned about generating garbage. More specifically about allocating GC-managed memory (GC stands for “garbage collector” and is both the name of the class that provides access to the garbage collector and an acronym for the garbage collector (as a concept) itself). Two of the major target platforms for XNA (Windows Phone 7 and Xbox 360) use variants of the .NET Compact Framework. On both variants, the GC runs under various circumstances (Windows Phone 7 and Xbox 360). Of concern to XNA programmers is the fact that it runs automatically after a fixed amount of GC-managed memory has been allocated (currently 1MB on both systems). Many beginning XNA programmers are unaware of what constitutes GC-managed memory, though. So here’s a quick overview. In .NET, there are two different “types” of types: value types and reference types. Only reference types are managed by the garbage collector. Value types are not managed by the garbage collector and are instead managed in other ways that are implementation dependent. For purposes of XNA programming, the important point is that they are not managed by the GC and thus do not, by themselves, increment that internal 1 MB allocation counter. (n.b. Structs are value types. If you have a struct that has a reference type as a member, then that reference type, when instantiated, will still be allocated in the GC-managed memory and will thus count against the 1 MB allocation counter. Putting it in a struct doesn’t change the fact that it gets allocated on the GC heap, but the struct itself is created outside of the GC’s purview). Both value types and reference types use the keyword ‘new’ to allocate a new instance of them. Sometimes this keyword is hidden by a method which creates new instances for you, e.g. XmlReader.Create. But the important thing to determine is whether or not you are dealing with a value types or a reference type. If it’s a value type, you can use the ‘new’ keyword to allocate new instances of that type without incrementing the GC allocation counter (except as above where it’s a struct with a reference type in it that is allocated by the constructor, but there are no .NET Framework or XNA Framework value types that do this so it would have to be a struct you created or that was in some third-party library you were using for that to even become an issue). The following is a list of most all of value types you are likely to use in a generic XNA game: AudioCategory (used with XACT; not available on WP7) AvatarExpression (Xbox 360 only, but exposed on Windows to ease Xbox development) bool BoundingBox BoundingSphere byte char Color DateTime decimal double any enum (System.Enum itself is a class, but all enums are value types such that there are no GC allocations for enums) float GamePadButtons GamePadCapabilities GamePadDPad GamePadState GamePadThumbSticks GamePadTriggers GestureSample int IntPtr (rarely but occasionally used in XNA) KeyboardState long Matrix MouseState nullable structs (anytime you see, e.g. int? something, that ‘?’ denotes a nullable struct, also called a nullable type) Plane Point Quaternion Ray Rectangle RenderTargetBinding sbyte (though I’ve never seen it used since most people would just use a short) short TimeSpan TouchCollection TouchLocation TouchPanelCapabilities uint ulong ushort Vector2 Vector3 Vector4 VertexBufferBinding VertexElement VertexPositionColor VertexPositionColorTexture VertexPositionNormalTexture VertexPositionTexture Viewport So there you have it. That’s not quite a complete list, mind you. For example: There are various structs in the .NET framework you might make use of. I left out everything from the Microsoft.Xna.Framework.Graphics.PackedVector namespace, since everything in there ventures into the realm of advanced XNA programming anyway (n.b. every single instantiable thing in that namespace is a struct and thus a value type; there are also two interfaces but interfaces cannot be instantiated at all and thus don’t figure in to this discussion). There are so many enums you’re likely to use (PlayerIndex, SpriteSortMode, SpriteEffects, SurfaceFormat, etc.) that including them would’ve flooded the list and reduced its utility. So I went with “any enum” and trust that you can figure out what the enums are (and it’s rare to use ‘new’ with an enum anyway). That list also doesn’t include any of the pre-defined static instances of some of the classes (e.g. BlendState.AlphaBlend, BlendState.Opaque, etc.) which are already allocated such that using them doesn’t cause any new allocations and therefore doesn’t increase that 1 MB counter. That list also has a few misleading things. VertexElement, VertexPositionColor, and all the other vertex types are structs. But you’re only likely to ever use them as an array (for use with VertexBuffer or DynamicVertexBuffer), and all arrays are reference types (even arrays of value types such as VertexPositionColor[ ] or int[ ]). * So that’s it for now. The note below may be a bit confusing (it deals with how the GC works and how arrays are managed in .NET). If so, you can probably safely ignore it for now but feel free to ask any questions regardless. * Arrays of value types (where the value type doesn’t contain any reference type members) are much faster for the GC to examine than arrays of reference types, so there is a definite benefit to using arrays of value types where it makes sense. But creating arrays of value types does cause the GC’s allocation counter to increase. Indeed, allocating a large array of a value type is one of the quickest ways to increment the allocation counter since a .NET array is a sequential block of memory. An array of reference types is just a sequential block of references (typically 4 bytes each) while an array of value types is a sequential block of instances of that type. So for an array of Vector3s it would be 12 bytes each since each float is 4 bytes and there are 3 in a Vector3; for an array of VertexPositionNormalTexture structs it would typically be 32 bytes each since it has two Vector3s and a Vector2. (Note that there are a few additional bytes taken up in the creation of an array, typically 12 but sometimes 16 or possibly even more, which depend on the implementation details of the array type on the particular platform the code is running on).

  Read the article

• Get and Set property accessors are ‘actually’ methods

  - by nmarun

  Well, they are ‘special’ methods, but they indeed are methods. See the class below: 1: public class Person 2: { 3: private string _name; 4:  5: public string Name 6: { 7: get 8: { 9: return _name; 10: } 11: set 12: { 13: if (value == "aaa") 14: { 15: throw new ArgumentException("Invalid Name"); 16: } 17: _name = value; 18: } 19: } 20:  21: public void Save() 22: { 23: Console.WriteLine("Saving..."); 24: } 25: } Ok, so a class with a field, a property with the get and set accessors and a method. Now my calling code says: 1: static void Main() 2: { 3: try 4: { 5: Person person1 = new Person 6: { 7: Name = "aaa", 8: }; 9:  10: } 11: catch (Exception ex) 12: { 13: Console.WriteLine(ex.Message); 14: Console.WriteLine(ex.StackTrace); 15: Console.WriteLine("--------------------"); 16: } 17: } When the code is run, you’ll get the following exception message displayed: Now, you see the first line of the stack trace where it says that the exception was thrown in the method set_Name(String value). Wait a minute, we have not declared any method with that name in our Person class. Oh no, we actually have. When you create a property, this is what happens behind the screen. The CLR creates two methods for each get and set property accessor. Let’s look at the signature once again: set_Name(String value) This also tells you where the ‘value’ keyword comes from in our set property accessor. You’re actually wiring up a method parameter to a field. 1: set 2: { 3: if (value == "aaa") 4: { 5: throw new ArgumentException("Invalid Name"); 6: } 7: _name = value; 8: } Digging deeper on this, I ran the ILDasm tool and this is what I see: We see the ‘free’ constructor (named .ctor) that the compiler gives us, the _name field, the Name property and the Save method. We also see the get_Name and set_Name methods. In order to compare the Save and the set_Name methods, I double-clicked on the two methods and this is what I see: The ‘.method’ keyword tells that both Save and set_Name are both methods (no guessing there!). Seeing the set_Name method as a public method did kinda surprise me. So I said, why can’t I do a person1.set_Name(“abc”) since it is declared as public. This cannot be done because the get_Name and set_Name methods have an extra attribute called ‘specialname’. This attribute is used to identify an IL (Intermediate Language) token that can be treated with special care by the .net language. So the thumb-rule is that any method with the ‘specialname’ attribute cannot be generally called / invoked by the user (a simple test using intellisense proves this). Their functionality is exposed through other ways. In our case, this is done through the property itself. The same concept gets extended to constructors as well making them special methods too. These so-called ‘special’ methods can be identified through reflection. 1: static void ReflectOnPerson() 2: { 3: Type personType = typeof(Person); 4:  5: MethodInfo[] methods = personType.GetMethods(); 6:  7: for (int i = 0; i < methods.Length; i++) 8: { 9: Console.Write("Method: {0}", methods[i].Name); 10: // Determine whether or not each method is a special name. 11: if (methods[i].IsSpecialName) 12: { 13: Console.Write(" has 'SpecialName' attribute"); 14: } 15: Console.WriteLine(); 16: } 17: } Line 11 shows the ‘IsSpecialName’ boolean property. So a method with a ‘specialname’ attribute gets mapped to the IsSpecialName property. The output is displayed as: Wuhuuu! There they are.. our special guests / methods. Verdict: Getting to know the internals… helps!

  Read the article

• Scripting out Contained Database Users

  - by Argenis

    Today’s blog post comes from a Twitter thread on which @SQLSoldier, @sqlstudent144 and @SQLTaiob were discussing the internals of contained database users. Unless you have been living under a rock, you’ve heard about the concept of contained users within a SQL Server database (hit the link if you have not). In this article I’d like to show you that you can, indeed, script out contained database users and recreate them on another database, as either contained users or as good old fashioned logins/server principals as well. Why would this be useful? Well, because you would not need to know the password for the user in order to recreate it on another instance. I know there is a limited number of scenarios where this would be necessary, but nonetheless I figured I’d throw this blog post to show how it can be done. A more obscure use case: with the password hash (which I’m about to show you how to obtain) you could also crack the password using a utility like hashcat, as highlighted on this SQLServerCentral article. The Investigation SQL Server uses System Base Tables to save the password hashes of logins and contained database users. For logins it uses sys.sysxlgns, whereas for contained database users it leverages sys.sysowners. I’ll show you what I do to figure this stuff out: I create a login/contained user, and then I immediately browse the transaction log with, for example, fn_dblog. It’s pretty obvious that only two base tables touched by the operation are sys.sysxlgns, and also sys.sysprivs – the latter is used to track permissions. If I connect to the DAC on my instance, I can query for the password hash of this login I’ve just created. A few interesting things about this hash. This was taken on my laptop, and I happen to be running SQL Server 2014 RTM CU2, which is the latest public build of SQL Server 2014 as of time of writing. In 2008 R2 and prior versions (back to 2000), the password hashes would start with 0x0100. The reason why this changed is because starting with SQL Server 2012 password hashes are kept using a SHA512 algorithm, as opposed to SHA-1 (used since 2000) or Snefru (used in 6.5 and 7.0). SHA-1 is nowadays deemed unsafe and is very easy to crack. For regular SQL logins, this information is exposed through the sys.sql_logins catalog view, so there is really no need to connect to the DAC to grab an SID/password hash pair. For contained database users, there is (currently) no method of obtaining SID or password hashes without connecting to the DAC. If we create a contained database user, this is what we get from the transaction log: Note that the System Base Table used in this case is sys.sysowners. sys.sysprivs is used as well, and again this is to track permissions. To query sys.sysowners, you would have to connect to the DAC, as I mentioned previously. And this is what you would get: There are other ways to figure out what SQL Server uses under the hood to store contained database user password hashes, like looking at the execution plan for a query to sys.dm_db_uncontained_entities (Thanks, Robert Davis!) SIDs, Logins, Contained Users, and Why You Care…Or Not. One of the reasons behind the existence of Contained Users was the concept of portability of databases: it is really painful to maintain Server Principals (Logins) synced across most shared-nothing SQL Server HA/DR technologies (Mirroring, Availability Groups, and Log Shipping). Often times you would need the Security Identifier (SID) of these logins to match across instances, and that meant that you had to fetch whatever SID was assigned to the login on the principal instance so you could recreate it on a secondary. With contained users you normally wouldn’t care about SIDs, as the users are always available (and synced, as long as synchronization takes place) across instances. Now you might be presented some particular requirement that might specify that SIDs synced between logins on certain instances and contained database users on other databases. How would you go about creating a contained database user with a specific SID? The answer is that you can’t do it directly, but there’s a little trick that would allow you to do it. Create a login with a specified SID and password hash, create a user for that server principal on a partially contained database, then migrate that user to contained using the system stored procedure sp_user_migrate_to_contained, then drop the login. CREATE LOGIN <login_name> WITH PASSWORD = <password_hash> HASHED, SID = <sid> ; GO USE <partially_contained_db>; GO CREATE USER <user_name> FROM LOGIN <login_name>; GO EXEC sp_migrate_user_to_contained @username = <user_name>, @rename = N’keep_name’, @disablelogin = N‘disable_login’; GO DROP LOGIN <login_name>; GO Here’s how this skeleton would look like in action: And now I have a contained user with a specified SID and password hash. In my example above, I renamed the user after migrated it to contained so that it is, hopefully, easier to understand. Enjoy!

  Read the article

• The illusion of Competence

  - by tony_lombardo

  Working as a contractor opened my eyes to the developer food chain.  Even though I had similar experiences earlier in my career, the challenges seemed much more vivid this time through.  I thought I’d share a couple of experiences with you, and the lessons that can be taken from them. Lesson 1: Beware of the “funnel” guy.  The funnel guy is the one who wants you to funnel all thoughts, ideas and code changes through him.  He may say it’s because he wants to avoid conflicts in source control, but the real reason is likely that he wants to hide your contributions.  Here’s an example.  When I finally got access to the code on one of my projects, I was told by the developer that I had to funnel all of my changes through him.  There were 4 of us coding on the project, but only 2 of us working on the UI.  The other 2 were working on a separate application, but part of the overall project.  So I figured, I’ll check it into SVN, he reviews and accepts then merges in.  Not even close.  I didn’t even have checkin rights to SVN, I had to email my changes to the developer so he could check those changes in.  Lesson 2: If you point out flaws in code to someone supposedly ‘higher’ than you in the developer chain, they’re going to get defensive.  My first task on this project was to review the code, familiarize myself with it.  So of course, that’s what I did.  And in familiarizing myself with it, I saw so many bad practices and code smells that I immediately started coming up with solutions to fix it.  Of course, when I reviewed these changes with the developer (guy who originally wrote the code), he smiled and nodded and said, we can’t make those changes now, it’s too destabilizing.  I recommended we create a new branch and start working on refactoring, but branching was a new concept for this guy and he was worried we would somehow break SVN. How about some concrete examples? I started out by recommending we remove NUnit dependency and tests from the application project, and create a separate Unit testing project.  This was met with a little bit of resistance because - “How do I access the private methods?”  As it turned out there weren’t really any private methods that weren’t exposed by public methods, so I quickly calmed this fear. Win 1 Loss 0 Next, I recommended that all of the File IO access be wrapped in Using clauses, or at least properly wrapped in try catch finally.  This recommendation was accepted.. but never implemented. Win 2  Loss 1 Next recommendation was to refactor the command pattern implementation.  The command pattern was implemented, but it wasn’t really necessary for the application.  More over, the fact that we had 100 different command classes, each with it’s own specific command parameters class, made maintenance a huge hassle.  The same code repeated over and over and over.  This recommendation was declined, the code was too fragile and this change would destabilize it.  I couldn’t disagree, though it was the commands themselves in many cases that were fragile. Win 2 Loss 2 Next recommendation was to aid performance (and responsiveness) of the application by using asynchronous service calls.  This on was accepted. Win 2 Loss 3 If you’re paying any attention, you’re wondering why the async service calls was scored as a loss.. Let me explain.  The service call was made using the async pattern.  Followed by a thread.sleep  <facepalm>. Now it’s easy to be harsh on this kind of code, especially if you’re an experienced developer.  But I understood how most of this happened.  One junior guy, working as hard as he can to build his first real world application, with little or no guidance from anyone else.  He had his pattern book and theory of programming to help him, but no real world experience.  He didn’t know how difficult it would be to trace the crashes to the coding issues above, but he will one day.  The part that amazed me was the management position that “this guy should be a team lead, because he’s worked so hard”.  I’m all for rewarding hard work, but when you reward someone by promoting them past the point of their competence, you’re setting yourself and them up for failure.  And that’s lesson 3.  Just because you’ve got a hard worker, doesn’t mean he should be leading a development project.  If you’re a junior guy busting your ass, keep at it.  I encourage you to try new things, but most importantly to learn from your mistakes.  And correct your mistakes.  And if someone else looks at your code and shows you a laundry list of things that should be done differently, don’t take it personally – they’re really trying to help you.  And if you’re a senior guy, working with a junior guy, it’s your duty to point out the flaws in the code.  Even if it does make you the bad guy.  And while I’ve used “guy” above, I mean both men and women.  And in some cases mutant dinosaurs. 

  Read the article

• Vote of Disconfidence to Entity Framework

  - by Ricardo Peres

  A friend of mine has found the following problem with Entity Framework 4: Two simple classes and one association between them (one to many): One condition to filter out soft-deleted entities (WHERE Deleted = 0): 100 records in the database; A simple query: 1: var l = ctx.Person.Include("Address").Where(x => (x.Address.Name == "317 Oak Blvd." && x.Address.Number == 926) || (x.Address.Name == "891 White Milton Drive" && x.Address.Number == 497)); Will produce the following SQL: 1: SELECT 2: [Extent1].[Id] AS [Id], 3: [Extent1].[FullName] AS [FullName], 4: [Extent1].[AddressId] AS [AddressId], 5: [Extent202].[Id] AS [Id1], 6: [Extent202].[Name] AS [Name], 7: [Extent202].[Number] AS [Number] 8: FROM [dbo].[Person] AS [Extent1] 9: LEFT OUTER JOIN [dbo].[Address] AS [Extent2] ON ([Extent2].[Deleted] = 0) AND ([Extent1].[AddressId] = [Extent2].[Id]) 10: LEFT OUTER JOIN [dbo].[Address] AS [Extent3] ON ([Extent3].[Deleted] = 0) AND ([Extent1].[AddressId] = [Extent3].[Id]) 11: LEFT OUTER JOIN [dbo].[Address] AS [Extent4] ON ([Extent4].[Deleted] = 0) AND ([Extent1].[AddressId] = [Extent4].[Id]) 12: LEFT OUTER JOIN [dbo].[Address] AS [Extent5] ON ([Extent5].[Deleted] = 0) AND ([Extent1].[AddressId] = [Extent5].[Id]) 13: LEFT OUTER JOIN [dbo].[Address] AS [Extent6] ON ([Extent6].[Deleted] = 0) AND ([Extent1].[AddressId] = [Extent6].[Id]) 14: ... 15: WHERE ((N'317 Oak Blvd.' = [Extent2].[Name]) AND (926 = [Extent3].[Number])) 16: ... And will result in 680 MB of memory being taken! Now, Entity Framework has been historically known for producing less than optimal SQL, but 680 MB for 100 entities?! According to Microsoft, the problem will be addressed in the following version, there is a Connect issue open. There is even a whitepaper, Performance Considerations for Entity Framework 5, which talks about some of the changes and optimizations coming on version 5, but by reading it, I got even more concerned: “Once the cache contains a set number of entries (800), we start a timer that periodically (once-per-minute) sweeps the cache.” Say what?! The next version of Entity Framework will spawn timer threads?! When Code First came along, I thought it was a step in the right direction. Sure, it didn’t include some things that NHibernate did for quite some time – for example, different strategies for Id generation that do not rely on IDENTITY columns, which makes INSERT batching impossible, or support for enumerated types – but I thought these would come with the time. Now, enumerated types have, but so did… timer threads! I’m afraid Entity Framework is becoming a monster.

  Read the article

• Play Thousands of Online Radio Stations with Shoutcast in VLC

  - by DigitalGeekery

  Are you looking for more variety from your radio stations? Today we’ll take a look at how to easily stream thousands of radio stations to your desktop with VLC media player. Getting Started Select Media from the menu, go to Services Discovery, and click Shoutcast radio listings.   Next, select View from the menu and click Playlist.   Or, click on the Show Playlist button In the Playlist window, click on Shoutcast radio listings in the left pane. You should then see a very long list of Titles displayed on the right. Scroll though the list to find a music genre or topic that interests you. Double-click to expand the list of station options. Select one of the channel listings from the list and double click to begin playing.   Looking for a specific station? Type a search term into the search filter box to see if it is available.   That’s it. Sit back and enjoy listening to your favorite Internet radio programming. If you are a music or talk radio fan, you aren’t likely to run out of listening options in VLC. Want to find some more uses for VLC? Check out our articles on how to copy a DVD, convert video files to MP3, and how to set a video as your desktop wallpaper. Download VLC Similar Articles Productive Geek Tips Listen to Over 100,000 Radio Stations in Windows Media CenterListen to Local FM Radio in Windows 7 Media CenterListen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer RadioWeekend Fun: Watch Television on Your PC with AnyTV TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool

  Read the article

• Take Advantage of Oracle's Ongoing Assurance Effort!

  - by eric.maurice

  Hi, this is Eric Maurice again! A few years ago, I posted a blog entry, which discussed the psychology of patching. The point of this blog entry was that a natural tendency existed for systems and database administrators to be reluctant to apply patches, even security patches, because of the fear of "breaking" the system. Unfortunately, this belief in the principle "if it ain't broke, don't fix it!" creates significant risks for organizations. Running systems without applying the proper security patches can greatly compromise the security posture of the organization because the security controls available in the affected system may be compromised as a result of the existence of the unfixed vulnerabilities. As a result, Oracle continues to strongly recommend that customers apply all security fixes as soon as possible. Most recently, I have had a number of conversations with customers who questioned the need to upgrade their highly stable but otherwise unsupported Oracle systems. These customers wanted to know more about the kind of security risks they were exposed to, by running obsolete versions of Oracle software. As per Oracle Support Policies, Critical Patch Updates are produced for currently supported products. In other words, Critical Patch Updates are not created by Oracle for product versions that are no longer covered under the Premier Support or Extended Support phases of the Lifetime Support Policy. One statement used in each Critical Patch Update Advisory is particularly important: "We recommend that customers upgrade to a supported version of Oracle products in order to obtain patches. Unsupported products, releases and versions are not tested for the presence of vulnerabilities addressed by this Critical Patch Update. However, it is likely that earlier versions of affected releases are also affected by these vulnerabilities." The purpose of this warning is to inform Oracle customers that a number of the vulnerabilities fixed in each Critical Patch Update may affect older versions of a specific product line. In other words, each Critical Patch Update provides a number of fixes for currently supported versions of a given product line (this information is listed for each bug in the Risk Matrices of the Critical Patch Update Advisory), but the unsupported versions in the same product line, while they may be affected by the vulnerabilities, will not receive the fixes, and are therefore vulnerable to attacks. The risk assumed by organizations wishing to remain on unsupported versions is amplified by the behavior of malicious hackers, who typically will attempt to, and sometimes succeed in, reverse-engineering the content of vendors' security fixes. As a result, it is not uncommon for exploits to be published soon after Oracle discloses vulnerabilities with the release of a Critical Patch Update or Security Alert. Let's consider now the nature of the vulnerabilities that may exist in obsolete versions of Oracle software. A number of severe vulnerabilities have been fixed by Oracle over the years. While Oracle does not test unsupported products, releases and versions for the presence of vulnerabilities addressed by each Critical Patch Update, it should be assumed that a number of the vulnerabilities fixed with the Critical Patch Update program do exist in unsupported versions (regardless of the product considered). The most severe vulnerabilities fixed in past Critical Patch Updates may result in full compromise of the targeted systems, down to the OS level, by remote and unauthenticated users (these vulnerabilities receive a CVSS Base Score of 10.0) or almost as critically, may result in the compromise of the affected systems (without compromising the underlying OS) by a remote and unauthenticated users (these vulnerabilities receive a CVSS Base Score of 7.5). Such vulnerabilities may result in complete takeover of the targeted machine (for the CVSS 10.0), or may result in allowing the attacker the ability to create a denial of service against the affected system or even hijacking or stealing all the data hosted by the compromised system (for the CVSS 7.5). The bottom line is that organizations should assume the worst case: that the most critical vulnerabilities are present in their unsupported version; therefore, it is Oracle's recommendation that all organizations move to supported systems and apply security patches in a timely fashion. Organizations that currently run supported versions but may be late in their security patch release level can quickly catch up because most Critical Patch Updates are cumulative. With a few exceptions noted in Oracle's Critical Patch Update Advisory, the application of the most recent Critical Patch Update will bring these products to current security patch level and provide the organization with the best possible security posture for their patch level. Furthermore, organizations are encouraged to upgrade to most recent versions as this will greatly improve their security posture. At Oracle, our security fixing policies state that security fixes are produced for the main code line first, and as a result, our products benefit from the mistakes made in previous version(s). Our ongoing assurance effort ensures that we work diligently to fix the vulnerabilities we find, and aim at constantly improving the security posture our products provide by default. Patch sets include numerous in-depth fixes in addition to those delivered through the Critical Patch Update and, in certain instances, important security fixes require major architectural changes that can only be included in new product releases (and cannot be backported through the Critical Patch Update program). For More Information: • Mary Ann Davidson is giving a webcast interview on Oracle Software Security Assurance on February 24th. The registration link for attending this webcast is located at http://event.on24.com/r.htm?e=280304&s=1&k=6A7152F62313CA09F77EBCEEA9B6294F&partnerref=EricMblog • A blog entry discussing Oracle's practices for ensuring the quality of Critical patch Updates can be found at http://blogs.oracle.com/security/2009/07/ensuring_critical_patch_update_quality.html • The blog entry "To patch or not to patch" is located at http://blogs.oracle.com/security/2008/01/to_patch_or_not_to_patch.html • Oracle's Support Policies are located at http://www.oracle.com/us/support/policies/index.html • The Critical Patch Update & Security Alert page is located at http://www.oracle.com/technetwork/topics/security/alerts-086861.html

  Read the article

• Interview with Ronald Bradford about MySQL Connect

  - by Keith Larson

  Ronald Bradford,  an Oracle ACE Director has been busy working with  database consulting, book writing (EffectiveMySQL) while traveling and speaking around the world in support of MySQL. I was able to take some of his time to get an interview on this thoughts about theMySQL Connect conference. Keith Larson: What where your thoughts when you heard that Oracle was going to provide the community the MySQL Conference ?Ronald Bradford: Oracle has already been providing various different local community events including OTN Tech Days and  MySQL community days. These are great for local regions both in the US and abroad.  In previous years there has been an increase of content at Oracle Open World, however that benefits the Oracle community far more then the MySQL community.  It is good to see that Oracle is realizing the benefit in providing a large scale dedicated event for the MySQL community that includes speakers from the MySQL development teams, invested companies in the ecosystem and other community evangelists.I fully expect a successful event and look forward to hopefully seeing MySQL Connect at the upcoming Brazil and Japan OOW conferences and perhaps an event on the East Coast.Keith Larson: Since you are part of the content committee, what did you think of the submissions that were received during call for papers?Ronald Bradford: There was a large number of quality submissions to the number of available presentation sessions. As with the previous years as a committee member for the annual MySQL conference, there is always a large variety of common cornerstone MySQL features as well as new products and upcoming companies sharing their MySQL experiences. All of the usual major players in the ecosystem will in presenting at MySQL Connect including Facebook, Twitter, Yahoo, Continuent, Percona, Tokutek, Sphinx and Amazon to name a few.  This is ensuring the event will have a large number of quality speakers and a difficult time in choosing what to attend. Keith Larson: What sessions do you look forwarding to attending? Ronald Bradford: As with most quality conferences you can only be in one place at one time, so with multiple tracks per session it is always difficult to decide. The continued work and success with MySQL Cluster, and with a number of sessions I am sure will be popular. The features that interest me the most are around the optimizer, where there are several sessions on new features, and on the importance of backups. There are three presentations in this area to choose from.Keith Larson: Are you going to cover any of the content in your books at your MySQL Connect sessions?Ronald Bradford: I will be giving two presentations at MySQL Connect. The first will include the techniques available for creating better indexes where I will be touching on some aspects of the first Effective MySQL book on Optimizing SQL Statements.  In my second presentation from experiences of managing 500+ AWS MySQL instances, I will be touching on areas including SQL tuning, backup and recovery and scale out with replication.   These are the key topics of the initial books in the Effective MySQL series that focus on performance, scalability and business continuity.  The books however cover a far greater amount of detail then can be presented in a 1 hour session. Keith Larson: What features of MySQL 5.6 do you look forward to the most ?Ronald Bradford: I am very impressed with the optimizer trace feature. The ability to see exposed information is invaluable not just for MySQL 5.6, but to also apply information discerned for optimizing SQL statements in earlier versions of MySQL.  Not everybody understands that it is easy to deploy a MySQL 5.6 slave into an existing topology running an older version if MySQL for evaluation of many new features.  You can use the new mysqlbinlog streaming feature for duplicating master binary logs on an older version with a MySQL 5.6 slave.  The improvements in instrumentation in the Performance Schema are exciting.   However, as with my upcoming Replication Techniques in Depth title, that will be available for sale at MySQL Connect, there are numerous replication features, some long overdue with provide significant management benefits. Crash Save Slaves, Global transaction Identifiers (GTID)  and checksums just to mention a few.Keith Larson: You have been to numerous conferences, what would you recommend for people at the conference? Ronald Bradford: Make the time to meet and introduce yourself to the speakers that cover the topics that most interest you. The MySQL ecosystem has a very strong community.  The relationships you build with presenters, developers and architects in MySQL can be invaluable, however they are created over time. Get to know these people, interact with them over time.  This is the opportunity to learn more then just the content from a 1 hour session. Keith Larson: Any additional tips to handling the long hours ? Ronald Bradford: Conferences can be hard, especially with all the post event drinking.  This is a two day event and I am sure will include additional events on Friday and Saturday night so come well prepared, and leave work behind. Take the time to learn something new.   You can always catchup on sleep later. Keith Larson: Thank you so much for taking some time to do this I look forward to seeing you at the MySQL Connect conference.  Please stay tuned here for more updates on MySQL. 

  Read the article

• MythTV lost recordings - "No recordings available" and no recording rules either

  - by nimasmi

  I have a c.6 year old mythtv database. I recently upgraded from Ubuntu 10.04 to 12.04. This brought a MythTV upgrade from 0.24 to 0.25, which went well. Today, all my recordings have disappeared. They still exist in the /var/lib/mythtv/recordings folder, and the 'M' key in the Watch Recordings page says that there are 201 recordings available somewhere, but they will not display. See screenshot: (implicit thanks to whomever upvoted this, giving me sufficient reputation to upload images) Changing the filter does not remedy the fact that there is nothing shown in the lists. My Upcoming Recordings screen says that there are no rules set, but my list of previously recorded shows is still there, and has an entry from as recently as 3am today. mythbackend --printsched gives the following: user@box:~$ mythbackend --printsched 2012-09-22 12:59:20.537008 C mythbackend version: fixes/0.25 [v0.25.2-15-g46cab93] www.mythtv.org 2012-09-22 12:59:20.537043 C Qt version: compile: 4.8.1, runtime: 4.8.1 2012-09-22 12:59:20.537048 N Enabled verbose msgs: general 2012-09-22 12:59:20.537076 N Setting Log Level to LOG_INFO 2012-09-22 12:59:20.537142 I Added logging to the console 2012-09-22 12:59:20.537152 I Added database logging to table logging 2012-09-22 12:59:20.537279 N Setting up SIGHUP handler 2012-09-22 12:59:20.537373 N Using runtime prefix = /usr 2012-09-22 12:59:20.537394 N Using configuration directory = /home/user/.mythtv 2012-09-22 12:59:20.537999 I Assumed character encoding: en_GB.UTF-8 2012-09-22 12:59:20.538599 N Empty LocalHostName. 2012-09-22 12:59:20.538610 I Using localhost value of box 2012-09-22 12:59:20.538792 I Testing network connectivity to '192.168.1.2' 2012-09-22 12:59:20.539420 I Starting process manager 2012-09-22 12:59:20.541412 I Starting IO manager (read) 2012-09-22 12:59:20.541715 I Starting IO manager (write) 2012-09-22 12:59:20.541836 I Starting process signal handler 2012-09-22 12:59:20.684497 N Setting QT default locale to EN_GB 2012-09-22 12:59:20.684694 I Current locale EN_GB 2012-09-22 12:59:20.684813 N Reading locale defaults from /usr/share/mythtv//locales/en_gb.xml 2012-09-22 12:59:20.697623 I New static DB connectionDataDirectCon 2012-09-22 12:59:20.704769 I MythCoreContext: Connecting to backend server: 192.168.1.2:6543 (try 1 of 1) Calculating Schedule from database. Inputs, Card IDs, and Conflict info may be invalid if you have multiple tuners. 2012-09-22 12:59:27.710538 E MythSocket(21dfcd0:14): readStringList: Error, timed out after 7000 ms. 2012-09-22 12:59:27.710592 C Protocol version check failure. The response to MYTH_PROTO_VERSION was empty. This happens when the backend is too busy to respond, or has deadlocked in due to bugs or hardware failure. Things I have tried so far: restart the backend restart the frontend run mythtv-setup and check database passwords and IP addresses change the frontend setting for backend IP from localhost to 192.168.1.2 (the backend/frontend's IP) run optimize_mythdb.pl Other suggestions appreciated.

  Read the article

• Subterranean IL: Fault exception handlers

  - by Simon Cooper

  Fault event handlers are one of the two handler types that aren't available in C#. It behaves exactly like a finally, except it is only run if control flow exits the block due to an exception being thrown. As an example, take the following method: .method public static void FaultExample(bool throwException) { .try { ldstr "Entering try block" call void [mscorlib]System.Console::WriteLine(string) ldarg.0 brfalse.s NormalReturn ThrowException: ldstr "Throwing exception" call void [mscorlib]System.Console::WriteLine(string) newobj void [mscorlib]System.Exception::.ctor() throw NormalReturn: ldstr "Leaving try block" call void [mscorlib]System.Console::WriteLine(string) leave.s Return } fault { ldstr "Fault handler" call void [mscorlib]System.Console::WriteLine(string) endfault } Return: ldstr "Returning from method" call void [mscorlib]System.Console::WriteLine(string) ret } If we pass true to this method the following gets printed: Entering try block Throwing exception Fault handler and the exception gets passed up the call stack. So, the exception gets thrown, the fault handler gets run, and the exception propagates up the stack afterwards in the normal way. If we pass false, we get the following: Entering try block Leaving try block Returning from method Because we are leaving the .try using a leave.s instruction, and not throwing an exception, the fault handler does not get called. Fault handlers and C# So why were these not included in C#? It seems a pretty simple feature; one extra keyword that compiles in exactly the same way, and with the same semantics, as a finally handler. If you think about it, the same behaviour can be replicated using a normal catch block: try { throw new Exception(); } catch { // fault code goes here throw; } The catch block only gets run if an exception is thrown, and the exception gets rethrown and propagates up the call stack afterwards; exactly like a fault block. The only complications that occur is when you want to add a fault handler to a try block with existing catch handlers. Then, you either have to wrap the try in another try: try { try { // ... } catch (DirectoryNotFoundException) { // ... // leave.s as normal... } catch (IOException) { // ... throw; } } catch { // fault logic throw; } or separate out the fault logic into another method and call that from the appropriate handlers: try { // ... } catch (DirectoryNotFoundException ) { // ... } catch (IOException ioe) { // ... HandleFaultLogic(); throw; } catch (Exception e) { HandleFaultLogic(); throw; } To be fair, the number of times that I would have found a fault handler useful is minimal. Still, it's quite annoying knowing such functionality exists, but you're not able to access it from C#. Fortunately, there are some easy workarounds one can use instead. Next time: filter handlers.

  Read the article

• How do you exclude yourself from Google Analytics on your website using cookies?

  - by Keoki Zee

  I'm trying to set up an exclusion filter with a browser cookie, so that my own visits to my don't show up in my Google Analytics. I tried 3 different methods and none of them have worked so far. I would like help understanding what I am doing wrong and how I can fix this. Method 1 First, I tried following Google's instructions, http://www.google.com/support/analytics/bin/answer.py?hl=en&answer=55481, for excluding traffic by Cookie Content: Create a new page on your domain, containing the following code: <body onLoad="javascript:pageTracker._setVar('test_value');"> Method 2 Next, when that didn't work, I googled around and found this Google thread, http://www.google.com/support/forum/p/Google%20Analytics/thread?tid=4741f1499823fcd5&hl=en, where the most popular answer says to use a slightly different code: SHS Analytics wrote: <body onLoad="javascript:_gaq.push(['_setVar','test_value']);"> Thank you! This has now set a __utmv cookie containing "test_value", whereas the original: pageTracker._setVar('test_value') (which Google is still recommending) did not manage to do that for me (in Mac Safari 5 and Firefox 3.6.8). So I tried this code, but it didn't work for me. Method 3 Finally, I searched StackOverflow and came across this thread, http://stackoverflow.com/questions/3495270/exclude-my-traffic-from-google-analytics-using-cookie-with-subdomain, which suggests that the following code might work: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setVar', 'exclude_me']); _gaq.push(['_setAccount', 'UA-xxxxxxxx-x']); _gaq.push(['_trackPageview']); // etc... </script> This script appeared in the head element in the example, instead of in the onload event of the body like in the previous 2 examples. So I tried this too, but still had no luck with trying to exclude myself from Google Analytics. Re-iterate question So, I tried all 3 methods above with no success. Am I doing something wrong? How can I exclude myself from my Google Analytics using an exclusion cookie for my browser?

  Read the article

• What&rsquo;s new in RadChart for 2010 Q1 (Silverlight / WPF)

  Greetings, RadChart fans! It is with great pleasure that I present this short highlight of our accomplishments for the Q1 release :). Weve worked very hard to make the best silverlight and WPF charting product even better. Here is some of what we did during the past few months.   1) Zooming&Scrolling and the new sampling engine: Without a doubt one of the most important things we did. This new feature allows you to bind your chart to a very large set of data with blazing performance. Dont take my word for it give it a try!   2) New Smart Label Positioning and Spider-like labels feature: This new feature really helps with very busy graphs. You can play with the different settings we offer in this example.   3) Sorting and Filtering. Much like our RadGridview control the chart now allows you to sort and filter your data out of the box with a single line of code!   4) Legend improvements Weve also been paying attention to those of you who wanted a much improved legend. It is now possible to customize the look and feel of legend items and legend position with a single click.   5) Custom palette brushes. You have told us that you want to easily customize all palette colors using a single clean API from both XAML and code behind. The new custom palette brushes API does exactly that.   There are numerous other improvements as well, as much improved themes, performance optimizations and other features that we did. If you want to dig in further check the release notes and changes and backwards compatibility topics.   Feel free to share the pains and gains of working with RadChart. Our team is always open to receiving constructive feedback and beer :-)Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Make Firefox Show Google Results for Default Address Bar Searches

  - by The Geek

  Have you ever typed something incorrectly into the Firefox address bar, and then had it take you to a page you weren’t expecting? The reason is because Firefox uses Google’s “I’m Feeling Lucky” search, but you can change it. Scratching your head? Let’s take a quick run through what we’re talking about… Normally, if you typed in something like just “howtogeek” in the address bar, and then hit enter… you’ll be taken directly to the How-To Geek site. But how? Very simple! It’s the same place you would have been taken to if you typed “howtogeek” into Google, and then clicked the “I’m Feeling Lucky” button, which takes you to the first result. This is what Firefox does behind the scenes when you put something into the address bar that isn’t a URL. But what if you’d rather head to the search results page instead? Luckily, all you have to do is tweak an about:config parameter in Firefox. Just head into about:config in the address bar, and then filter for keyword.url like so: Double-click on the entry in the list, and then delete the &gfns=1 from the value. That’s the part of the URL that triggers Google to redirect to the first result. And now, the next time you type something into the address bar, either on purpose or because you typo’d it, you’ll be taken to the results page instead: About:Config tweaking is lots of fun. Similar Articles Productive Geek Tips Make Firefox Quick Search Use Google’s Beta Search KeysMake Firefox Built-In Search Box Use Google’s Experimental Search KeysCombine Wolfram Alpha & Google Search Results in FirefoxHow To Run 4 Different Google Searches at Once In the Same TabChange Default Feed Reader in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >