Search Results

Search found 5233 results on 210 pages for 'fulltext searching'.

Page 190/210 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Exchange IMAP4 connector - Error Event ID 2006

  - by MikeB

  A couple of users in my organisation use IMAP4 to connect to Exchange 2007 (Update rollup 9 applied) because they prefer Thunderbird / Postbox clients. One of the users is generating errors in the Application Log as follows: An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 1523, user "*******", folder *********, subject: "******", date: "*******" into MIME format. Microsoft.Exchange.Data.Storage.ConversionFailedException: Message content has become corrupted. ---> System.ArgumentException: Value should be a valid content type in the form 'token/token' Parameter name: value at Microsoft.Exchange.Data.Mime.ContentTypeHeader.set_Value(String value) at Microsoft.Exchange.Data.Storage.MimeStreamWriter.WriteHeader(HeaderId type, String data) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeAttachment(MimePartInfo part, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeParts(List`1 parts, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.<>c__DisplayClass2.<WriteMimePart>b__0() at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, String exceptionString, CtsCall ctsCall) at Microsoft.Exchange.Data.Storage.ImapItemConverter.WriteMimePart(ItemToMimeConverter converter, MimeStreamWriter writer, OutboundConversionOptions options, MimePartInfo partInfo, MimeFlags conversionFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream, UInt32[] indices) From my reading around it seems that the suggestion is to ask users to log in to Outlook / OWA and view the messages there. However, having logged in as the users myself, the messages cannot be found either through searching or by browsing the folder detailed in the log entry. The server returns the following error to the client: "The message could not be retrieved using the IMAP4 protocol. The message has not been deleted and may be accessible using either Microsoft Outlook or Microsoft Office Outlook Web Access. You can also try contacting the original sender of the message to find out about the contents of the message. Retrieval of this message will be retried when the server is updated with a fix that addresses the problem." Messages were transferred in to Exchange by copying them from the old Apple Xserve, accessed using IMAP. So my question, finally: 1. Is there any way to get the IMAP Exchange connector to rebuild its cache of messages since it doesn't seem to be pulling them directly from the MAPI store? 2. Alternatively, if there is no database, any ideas on why these messages don't appear in Outlook or OWA would be gratefully received. Many thanks, Mike

  Read the article

• PHP `virtual()` with Apache MultiViews not working after upgrade to Ubuntu 12.04

  - by Izzy

  I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading (or rather moving, as it is on a new machine) to Ubuntu 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. So PHP's virtual() function basically worked -- but the language dependend stuff obviously did no longer work together with it as it did before. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

  Read the article

• NGINX rewrite rules help. Redirect not working and want to get rid of index.php in urls

  - by Tamerax

  hey! I have 2 questions for nginx users. 1) I'm trying to setup my joomla server onto my new linode running NGINX and after much (like days) of searching and testing, I finally have a config that works with with SEF url plugins...sorta. I was using an apache system on the old server and it used mod_rewrite and life was fine in terms of SEF. Since NGINX doesn't have mod_rewrite, I found something that works BUT it constantly leaves index.php in the urls. ex: http://mysite.com/index.php/forum i want it to be just http://mysite.com/forum but without mod_rewrite it doesn't seem to be possible in joomla that i'm aware of. I know in wordpress it IS possible but I have to use a plugin. Here is my config file: server { listen 80; server_name mysite.com www.mysite.com; access_log /home/public_html/mysite.com/log/access.log; error_log /home/public_html/mysite.com/log/error.log; root /home/public_html/mysite.com/public/; large_client_header_buffers 4 8k; # prevent some 400 errors index index.php index.html; fastcgi_index index.php; location / { expires 30d; error_page 404 = @joomla; log_not_found off; } # Rewrite location @joomla { rewrite ^(.*)$ /index.php?q=last; } # Static Files location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; } # PHP location ~ \.php { keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/public_html/mysite.com/public /$fastcgi_script_name; } } 2) second question should be easy but i can't get it to work. I want to use the same config I posted above and have either mysite.com or www.mysite.com both forward to mysite.com/portal. Basically when you hit up the front page with or without the www, it all gets forwarded to a sub directory on the server I called Portal. I have tried several variations of: rewrite ^/(.*) http://www.example.com/portal/$1 permanent; but it usually ends with firefox telling me there is some crazy loop happening the address bar saying something like mysite.com/portalportalportalportalportal.........on and on. So, any help on either of these issues would be awesome!! Thanks!!

  Read the article

• Strange monitor issue - screen goes black after a few seconds

  - by Scott Szretter

  My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

  Read the article

• Holding off Windows 2000/3 Server in Shutdown

  - by user1668993

  We have a C# VS2010 application running on a Windows 2000 Server box (there is also a Windows 2003 Server box) as pretty much the only application running. We remove power from the box. There is a short duration battery (maybe 3 minutes of power) which then waits 10 seconds and then decides things are coming down and notifies Windows that it needs to shut down. Windows sends a CTRL_SHUTDOWN_EVENT event to the application which fields it and tries to keep Windows from going down for a while to let another computer which communicates with this one time to do some file work on the first computer. It does this by a timing loop and after the loop is over, it exits gracefully and the computer shuts down. Nice plan but it doesn't work. The application gets to maybe 20 seconds and the application is forcibly killed by Windows and Windows shuts down. At 90 seconds, the hardware firmware running the battery turns off power to the computer. I have tried searching to find out how to hold off Windows for a bit of time. I tried creating (it wasn't there) the HKEY_LOCAL_MACHINE subtree: \SYSTEM\CurrentControlSet\Control\WaitToKillAppTimeout registry key to 60000 but though it seemed to keep the popup from happening, Windows itself died at about the same amount of time -- we think without having the opportunity to shut itself down gracefully. Maybe the registry key worked but wasn't enough. Basically I have an "ill-mannered" application which is refusing to shut down (for the best of reasons) and without the registry key thing, Windows eventually shuts it down anyway and then shuts itself down. With the registry change, we think what is happening is that Windows doesn't shut down the application but Windows itself is killed suddenly without shutting down but power is still not pulled for about another minute, and then power is pulled. So maybe we have layers here. First there is how long the application tries to stay open. Then there is how long Windows is prepared to allow it to stay open. Then there is ... something... which kills windows. Then there is the power loss. Anyone have any ideas how we can get windows to stay open and in operation say to 70 seconds instead of about 20? Is our registry key right, but not enough? Is there some additional key we need to set to determine how long after windows is notified of a shutdown before it just kills itself? Thanks in advance.

  Read the article

• Subversion 1.7.x and expat location in configure

  - by ditto

  I am running CentOS 6.3 64bit and DirectAdmin control panel. Currently I have installed Apache Subversion 1.6.19 without any problems. I have installed expat and expat-devel and neon-devel using yum. When installing Apache Subversion 1.6.19 this configure command works fine: ./configure --prefix=/usr --with-ssl --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However when installing Apache Subversion 1.7.7 using the same configure command as above, I get this error after doing commmand "make": /etc/httpd/lib/libaprutil-1.so: undefined reference to `XML_StopParser' collect2: ld returned 1 exit status make: *** [subversion/svnadmin/svnadmin] Error 1 However I found out I can solve that problem by adding this into the configure command: --with-expat=includes:lib_search_dirs:libs So it then looks like this: ./configure --prefix=/usr --with-ssl --with-expat=includes:lib_search_dirs:libs --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However that configure command then give this warning: configure: WARNING: Expat found amongst libraries used by APR-Util, but Subversion libraries might be needlessly linked against additional unused libraries. It can be avoided by specifying exact location of Expat in argument of --with-expat option. So I want to solve that. I have experimentet alot, but not been able to figure out how to "specifying exact location of Expat" in configure command, and how to find out what the location should be? However after a lot of searching I found this: http://subversion.tigris.org/issues/show_bug.cgi?id=3997 - that is a FreeBSD user saying this: Building Subversion 1.7.x on FreeBSD currently requires a configure flag: --with-expat=/usr/local/include:/usr/local/lib:expat As that is the default location of expat on that platform, it would be nice if configure detected it automatically. However I am not using FreeBSD, I am running CentOS 6.3 64bit. Also remember I said I have installed expat and expat-devel and neon-devel using yum. However I tried to use the expat/command path posted by the FreeBSD user, and it seems to work, it does not give errors when running configure command, and does not give errors when running "make". This is what I used then: ./configure --prefix=/usr --with-ssl --with-expat=/usr/local/include:/usr/local/lib:expat --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config But this server is a production server, and therfor I need your help to advice if this is also correct to run on a CentOS server? Is the following path in expat command correct on CentOS?: --with-expat=/usr/local/include:/usr/local/lib:expat If not, please advice what it should be changed to. Thanks in advance for any confirmation or help on this!

  Read the article

• Linux clock loses 10 minutes every week

  - by PaKempf

  One of my linux server's clock loses 10 minutes every now and then, nearly every week. I update the time so it stays correct, and although it doesn't really bother me, i'd like to fix it. I've been searching around a bit. Nothing can be responsible in the crontab, and i can't find any related message in the logs. Some people seem to use ntp to fix that kind of issue, but i'd prefer not to use an unecessary component on it. Uname result : Linux unis-monitor 2.6.32-5-686 #1 SMP Mon Feb 25 01:04:36 UTC 2013 i686 GNU/Linux Cat message : cat messages Jul 14 06:25:06 unis-monitor rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="882" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Jul 15 06:25:05 unis-monitor rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="882" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Cat syslog cat syslog Jul 15 06:25:05 unis-monitor rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="882" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Jul 15 06:39:01 unis-monitor /USR/SBIN/CRON[15272]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jul 15 07:09:01 unis-monitor /USR/SBIN/CRON[15465]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jul 15 07:17:01 unis-monitor /USR/SBIN/CRON[15521]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 15 07:39:01 unis-monitor /USR/SBIN/CRON[15662]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jul 15 08:09:01 unis-monitor /USR/SBIN/CRON[15855]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jul 15 08:17:01 unis-monitor /USR/SBIN/CRON[15911]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 15 08:39:01 unis-monitor /USR/SBIN/CRON[16052]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) Jul 15 09:09:01 unis-monitor /USR/SBIN/CRON[16273]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -delete) So if you have any clue of where to look or what i could use to monitor those date change ? Here is some more infos : the server is a virtual server hosted on HyperV on a win 2012 server. Don't know if it changes anything, seen the other servers hosted don't have this issue...

  Read the article

• How to stretch the image from one screen to two screens

  - by wxiiir

  I want to be able to stretch the image from one monitor to a second monitor even if i have to use some software to do it. For example i want the top half of the image that is now shown on my first monitor to occupy the whole second monitor and i want the bottom half to occupy the whole first monitor, or the other way around i don't really care as long as it works. I would be cool to know how to do the same stuff but to the left half and right half. I know that image pixels would have twice the lenght or height this way but i don't really care about it as long as it works so basically i want the stuff to show on both monitors but with the same pixels as before. I have a hd4870 and windows7 and hd4000 family doesnt support having two monitors behaving like a large one, only hd5000 upwards, this would solve my problems without any of the drawbacks but it just can't be done (or maybe it can via software but i'm just too tired of searching). A solution to make almost any graphic card have two monitors behaving like a large one is matrox dualhead2go but that's just as expensive as a good hd5000 card so it's not worth it. thanks in advance EDIT I guess that nobody so far was able to fully comprehend my problem that was very explicitly written but i will elaborate some more. My hd4870 can have 2 monitors working with it but some stuff like games won't run on both monitors, which sucks. There are some ways to circumvent this problem and two of them are perfect or almost perfect but expensive and the third would be a software solution that would make it possible. The first one is to have and hd5000 family video card which will work just fine with both monitors. The second is to have a matrox dualhead2go that will make my hd4870 detect my two monitors as a large monitor. The third is to have a software that makes my two displays be detected as a large display and then captures the output of the video card, splits the images and renders them as 2d images to both monitors OR a simpler one but that would make outputted pixels double the width or height would be to capture the output of the graphics card to one screen, split it in two and enlarge it to fit both monitors and then output it to the monitors. p.s. By capturing the output of the video card i mean just make the video card process the stuff in a certain way. Making the video card detect two monitors as a large one via software may be a bit impossible or impracticable but stretching the output as a 2d image from one to both monitors for some coders should be a walk in the park so it would be likely that such program would exist or that some widespread softwares for dual monitor would have such function in them.

  Read the article

• Configure server on network to analyze traffic

  - by Strajan Sebastian

  I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

  Read the article

• How to Use Windows’ Advanced Search Features: Everything You Need to Know

  - by Chris Hoffman

  You should never have to hunt down a lost file on modern versions of Windows — just perform a quick search. You don’t even have to wait for a cartoon dog to find your files, like on Windows XP. The Windows search indexer is constantly running in the background to make quick local searches possible. This enables the kind of powerful search features you’d use on Google or Bing — but for your local files. Controlling the Indexer By default, the Windows search indexer watches everything under your user folder — that’s C:\Users\NAME. It reads all these files, creating an index of their names, contents, and other metadata. Whenever they change, it notices and updates its index. The index allows you to quickly find a file based on the data in the index. For example, if you want to find files that contain the word “beluga,” you can perform a search for “beluga” and you’ll get a very quick response as Windows looks up the word in its search index. If Windows didn’t use an index, you’d have to sit and wait as Windows opened every file on your hard drive, looked to see if the file contained the word “beluga,” and moved on. Most people shouldn’t have to modify this indexing behavior. However, if you store your important files in other folders — maybe you store your important data a separate partition or drive, such as at D:\Data — you may want to add these folders to your index. You can also choose which types of files you want to index, force Windows to rebuild the index entirely, pause the indexing process so it won’t use any system resources, or move the index to another location to save space on your system drive. To open the Indexing Options window, tap the Windows key on your keyboard, type “index”, and click the Indexing Options shortcut that appears. Use the Modify button to control the folders that Windows indexes or the Advanced button to control other options. To prevent Windows from indexing entirely, click the Modify button and uncheck all the included locations. You could also disable the search indexer entirely from the Programs and Features window. Searching for Files You can search for files right from your Start menu on Windows 7 or Start screen on Windows 8. Just tap the Windows key and perform a search. If you wanted to find files related to Windows, you could perform a search for “Windows.” Windows would show you files that are named Windows or contain the word Windows. From here, you can just click a file to open it. On Windows 7, files are mixed with other types of search results. On Windows 8 or 8.1, you can choose to search only for files. If you want to perform a search without leaving the desktop in Windows 8.1, press Windows Key + S to open a search sidebar. You can also initiate searches directly from Windows Explorer — that’s File Explorer on Windows 8. Just use the search box at the top-right of the window. Windows will search the location you’ve browsed to. For example, if you’re looking for a file related to Windows and know it’s somewhere in your Documents library, open the Documents library and search for Windows. Using Advanced Search Operators On Windows 7, you’ll notice that you can add “search filters” form the search box, allowing you to search by size, date modified, file type, authors, and other metadata. On Windows 8, these options are available from the Search Tools tab on the ribbon. These filters allow you to narrow your search results. If you’re a geek, you can use Windows’ Advanced Query Syntax to perform advanced searches from anywhere, including the Start menu or Start screen. Want to search for “windows,” but only bring up documents that don’t mention Microsoft? Search for “windows -microsoft”. Want to search for all pictures of penguins on your computer, whether they’re PNGs, JPEGs, or any other type of picture file? Search for “penguin kind:picture”. We’ve looked at Windows’ advanced search operators before, so check out our in-depth guide for more information. The Advanced Query Syntax gives you access to options that aren’t available in the graphical interface. Creating Saved Searches Windows allows you to take searches you’ve made and save them as a file. You can then quickly perform the search later by double-clicking the file. The file functions almost like a virtual folder that contains the files you specify. For example, let’s say you wanted to create a saved search that shows you all the new files created in your indexed folders within the last week. You could perform a search for “datecreated:this week”, then click the Save search button on the toolbar or ribbon. You’d have a new virtual folder you could quickly check to see your recent files. One of the best things about Windows search is that it’s available entirely from the keyboard. Just press the Windows key, start typing the name of the file or program you want to open, and press Enter to quickly open it. Windows 8 made this much more obnoxious with its non-unified search, but unified search is finally returning with Windows 8.1.     

  Read the article

• Parallelism in .NET – Part 1, Decomposition

  - by Reed

  The first step in designing any parallelized system is Decomposition.  Decomposition is nothing more than taking a problem space and breaking it into discrete parts.  When we want to work in parallel, we need to have at least two separate things that we are trying to run.  We do this by taking our problem and decomposing it into parts. There are two common abstractions that are useful when discussing parallel decomposition: Data Decomposition and Task Decomposition.  These two abstractions allow us to think about our problem in a way that helps leads us to correct decision making in terms of the algorithms we’ll use to parallelize our routine. To start, I will make a couple of minor points. I’d like to stress that Decomposition has nothing to do with specific algorithms or techniques.  It’s about how you approach and think about the problem, not how you solve the problem using a specific tool, technique, or library.  Decomposing the problem is about constructing the appropriate mental model: once this is done, you can choose the appropriate design and tools, which is a subject for future posts. Decomposition, being unrelated to tools or specific techniques, is not specific to .NET in any way.  This should be the first step to parallelizing a problem, and is valid using any framework, language, or toolset.  However, this gives us a starting point – without a proper understanding of decomposition, it is difficult to understand the proper usage of specific classes and tools within the .NET framework. Data Decomposition is often the simpler abstraction to use when trying to parallelize a routine.  In order to decompose our problem domain by data, we take our entire set of data and break it into smaller, discrete portions, or chunks.  We then work on each chunk in the data set in parallel. This is particularly useful if we can process each element of data independently of the rest of the data.  In a situation like this, there are some wonderfully simple techniques we can use to take advantage of our data.  By decomposing our domain by data, we can very simply parallelize our routines.  In general, we, as developers, should be always searching for data that can be decomposed. Finding data to decompose if fairly simple, in many instances.  Data decomposition is typically used with collections of data.  Any time you have a collection of items, and you’re going to perform work on or with each of the items, you potentially have a situation where parallelism can be exploited.  This is fairly easy to do in practice: look for iteration statements in your code, such as for and foreach. Granted, every for loop is not a candidate to be parallelized.  If the collection is being modified as it’s iterated, or the processing of elements depends on other elements, the iteration block may need to be processed in serial.  However, if this is not the case, data decomposition may be possible. Let’s look at one example of how we might use data decomposition.  Suppose we were working with an image, and we were applying a simple contrast stretching filter.  When we go to apply the filter, once we know the minimum and maximum values, we can apply this to each pixel independently of the other pixels.  This means that we can easily decompose this problem based off data – we will do the same operation, in parallel, on individual chunks of data (each pixel). Task Decomposition, on the other hand, is focused on the individual tasks that need to be performed instead of focusing on the data.  In order to decompose our problem domain by tasks, we need to think about our algorithm in terms of discrete operations, or tasks, which can then later be parallelized. Task decomposition, in practice, can be a bit more tricky than data decomposition.  Here, we need to look at what our algorithm actually does, and how it performs its actions.  Once we have all of the basic steps taken into account, we can try to analyze them and determine whether there are any constraints in terms of shared data or ordering.  There are no simple things to look for in terms of finding tasks we can decompose for parallelism; every algorithm is unique in terms of its tasks, so every algorithm will have unique opportunities for task decomposition. For example, say we want our software to perform some customized actions on startup, prior to showing our main screen.  Perhaps we want to check for proper licensing, notify the user if the license is not valid, and also check for updates to the program.  Once we verify the license, and that there are no updates, we’ll start normally.  In this case, we can decompose this problem into tasks – we have a few tasks, but there are at least two discrete, independent tasks (check licensing, check for updates) which we can perform in parallel.  Once those are completed, we will continue on with our other tasks. One final note – Data Decomposition and Task Decomposition are not mutually exclusive.  Often, you’ll mix the two approaches while trying to parallelize a single routine.  It’s possible to decompose your problem based off data, then further decompose the processing of each element of data based on tasks.  This just provides a framework for thinking about our algorithms, and for discussing the problem.

  Read the article

• Building a database installer with WiX, datadude and Visual Studio 2010

  - by jamiet

  Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false)  so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet 

  Read the article

• Database model for keeping track of likes/shares/comments on blog posts over time

  - by gage

  My goal is to keep track of the popular posts on different blog sites based on social network activity at any given time. The goal is not to simply get the most popular now, but instead find posts that are popular compared to other posts on the same blog. For example, I follow a tech blog, a sports blog, and a gossip blog. The tech blog gets waaay more readership than the other two blogs, so in raw numbers every post on the tech blog will always out number views on the other two. So lets say the average tech blog post gets 500 facebook likes and the other two get an average of 50 likes per post. Then when there is a sports blog post that has 200 fb likes and a gossip blog post with 300 while the tech blog posts today have 500 likes I want to highlight the sports and gossip blog posts (more likes than average vs tech blog with more # of likes but just average for the blog) The approach I am thinking of taking is to make an entry in a database for each blog post. Every x minutes (say every 15 minutes) I will check how many likes/shares/comments an entry has received on all the social networks (facebook, twitter, google+, linkeIn). So over time there will be a history of likes for each blog post, i.e post 1234 after 15 min: 10 fb likes, 4 tweets, 6 g+ after 30 min: 15 fb likes, 15 tweets, 10 g+ ... ... after 48 hours: 200 fb likes, 25 tweets, 15 g+ By keeping a history like this for each blog post I can know the average number of likes/shares/tweets at any give time interval. So for example the average number of fb likes for all blog posts 48hrs after posting is 50, and a particular post has 200 I can mark that as a popular post and feature/highlight it. A consideration in the design is to be able to easily query the values (likes/shares) for a specific time-frame, i.e. fb likes after 30min or tweets after 24 hrs in-order to compute averages with which to compare against (or should averages be stored in it's own table?) If this approach is flawed or could use improvement please let me know, but it is not my main question. My main question is what should a database scheme for storing this info look like? Assuming that the above approach is taken I am trying to figure out what a database schema for storing the likes over time would look like. I am brand new to databases, in doing some basic reading I see that it is advisable to make a 3NF database. I have come up with the following possible schema. Schema 1 DB Popular Posts Table: Post post_id ( primary key(pk) ) url title Table: Social Activity activity_id (pk) url (fk) type (i.e. facebook,twitter,g+) value timestamp This was my initial instinct (base on my very limited db knowledge). As far as I under stand this schema would be 3NF? I searched for designs of similar database model, and found this question on stackoverflow, http://stackoverflow.com/questions/11216080/data-structure-for-storing-height-and-weight-etc-over-time-for-multiple-users . The scenario in that question is similar (recording weight/height of users overtime). Taking the accepted answer for that question and applying it to my model results in something like: Schema 2 (same as above, but break down the social activity into 2 tables) DB Popular Posts Table: Post post_id (pk) url title Table: Social Measurement measurement_id (pk) post_id (fk) timestamp Table: Social stat stat_id (pk) measurement_id (fk) type (i.e. facebook,twitter,g+) value The advantage I see in schema 2 is that I will likely want to access all the values for a given time, i.e. when making a measurement at 30min after a post is published I will simultaneous check number of fb likes, fb shares, fb comments, tweets, g+, linkedIn. So with this schema it may be easier get get all stats for a measurement_id corresponding to a certain time, i.e. all social stats for post 1234 at time x. Another thought I had is since it doesn't make sense to compare number of fb likes with number of tweets or g+ shares, maybe it makes sense to separate each social measurement into it's own table? Schema 3 DB Popular Posts Table: Post post_id (pk) url title Table: fb_likes fb_like_id (pk) post_id (fk) timestamp value Table: fb_shares fb_shares_id (pk) post_id (fk) timestamp value Table: tweets tweets__id (pk) post_id (fk) timestamp value Table: google_plus google_plus_id (pk) post_id (fk) timestamp value As you can see I am generally lost/unsure of what approach to take. I'm sure this typical type of database problem (storing measurements overtime, i.e temperature statistic) that must have a common solution. Is there a design pattern/model for this, does it have a name? I tried searching for "database periodic data collection" or "database measurements over time" but didn't find anything specific. What would be an appropriate model to solve the needs of this problem?

  Read the article

• Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

  - by Gareth

  This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

  Read the article

• SmtpClient and Locked File Attachments

  - by Rick Strahl

  Got a note a couple of days ago from a client using one of my generic routines that wraps SmtpClient. Apparently whenever a file has been attached to a message and emailed with SmtpClient the file remains locked after the message has been sent. Oddly this particular issue hasn’t cropped up before for me although these routines are in use in a number of applications I’ve built. The wrapper I use was built mainly to backfit an old pre-.NET 2.0 email client I built using Sockets to avoid the CDO nightmares of the .NET 1.x mail client. The current class retained the same class interface but now internally uses SmtpClient which holds a flat property interface that makes it less verbose to send off email messages. File attachments in this interface are handled by providing a comma delimited list for files in an Attachments string property which is then collected along with the other flat property settings and eventually passed on to SmtpClient in the form of a MailMessage structure. The jist of the code is something like this: /// <summary> /// Fully self contained mail sending method. Sends an email message by connecting /// and disconnecting from the email server. /// </summary> /// <returns>true or false</returns> public bool SendMail() { if (!this.Connect()) return false; try { // Create and configure the message MailMessage msg = this.GetMessage(); smtp.Send(msg); this.OnSendComplete(this); } catch (Exception ex) { string msg = ex.Message; if (ex.InnerException != null) msg = ex.InnerException.Message; this.SetError(msg); this.OnSendError(this); return false; } finally { // close connection and clear out headers // SmtpClient instance nulled out this.Close(); } return true; } /// <summary> /// Configures the message interface /// </summary> /// <param name="msg"></param> protected virtual MailMessage GetMessage() { MailMessage msg = new MailMessage(); msg.Body = this.Message; msg.Subject = this.Subject; msg.From = new MailAddress(this.SenderEmail, this.SenderName); if (!string.IsNullOrEmpty(this.ReplyTo)) msg.ReplyTo = new MailAddress(this.ReplyTo); // Send all the different recipients this.AssignMailAddresses(msg.To, this.Recipient); this.AssignMailAddresses(msg.CC, this.CC); this.AssignMailAddresses(msg.Bcc, this.BCC); if (!string.IsNullOrEmpty(this.Attachments)) { string[] files = this.Attachments.Split(new char[2] { ',', ';' }, StringSplitOptions.RemoveEmptyEntries); foreach (string file in files) { msg.Attachments.Add(new Attachment(file)); } } if (this.ContentType.StartsWith("text/html")) msg.IsBodyHtml = true; else msg.IsBodyHtml = false; msg.BodyEncoding = this.Encoding; … additional code omitted return msg; } Basically this code collects all the property settings of the wrapper object and applies them to the SmtpClient and in GetMessage() to an individual MailMessage properties. Specifically notice that attachment filenames are converted from a comma-delimited string to filenames from which new attachments are created. The code as it’s written however, will cause the problem with file attachments not being released properly. Internally .NET opens up stream handles and reads the files from disk to dump them into the email send stream. The attachments are always sent correctly but the local files are not immediately closed. As you probably guessed the issue is simply that some resources are not automatcially disposed when sending is complete and sure enough the following code change fixes the problem: // Create and configure the message using (MailMessage msg = this.GetMessage()) { smtp.Send(msg); if (this.SendComplete != null) this.OnSendComplete(this); // or use an explicit msg.Dispose() here } The Message object requires an explicit call to Dispose() (or a using() block as I have here) to force the attachment files to get closed. I think this is rather odd behavior for this scenario however. The code I use passes in filenames and my expectation of an API that accepts file names is that it uses the files by opening and streaming them and then closing them when done. Why keep the streams open and require an explicit .Dispose() by the calling code which is bound to lead to unexpected behavior just as my customer ran into? Any API level code should clean up as much as possible and this is clearly not happening here resulting in unexpected behavior. Apparently lots of other folks have run into this before as I found based on a few Twitter comments on this topic. Odd to me too is that SmtpClient() doesn’t implement IDisposable – it’s only the MailMessage (and Attachments) that implement it and require it to clean up for left over resources like open file handles. This means that you couldn’t even use a using() statement around the SmtpClient code to resolve this – instead you’d have to wrap it around the message object which again is rather unexpected. Well, chalk that one up to another small unexpected behavior that wasted a half an hour of my time – hopefully this post will help someone avoid this same half an hour of hunting and searching. Resources: Full code to SmptClientNative (West Wind Web Toolkit Repository) SmtpClient Documentation MSDN © Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  

  Read the article

• ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide

  - by Kavitha

  The ICC Cricket World Cup 2011 will be hosted jointly by Bangladesh, India and Sri Lanka. This 10th edition of World Cup is held between 19 February-2 April 2011. The World Cup drive will be starting in Dhaka on 19 February with the inaugural match between India and Bangladesh. The 43 days long ICC World Cup Cricket 2011 event will host 49 matches, day matches starting as early as 9.30am IST and day-night matches starting at 2.30pm IST. Here is our guide to follow 2011 ICC Cricket World Cup live on your computers, televisions,mobiles and radios Free Live Streaming On The Web (Official & Unofficial) http://espnstar.com will live stream all the matches of World Cup 2011 and they will be available in HD quality as they are the official broadcasters of World Cup 2011 cricket event. This is the first time ever a world cup cricket event is streamed online officially. If you are not able to access the official live streaming of Cricket World Cup due to regional restrictions, point your browser to any of the following unofficial live streams on the web. NOTE: MAKE SURE THAT YOUR ANTIVIRUS and ANTIMALWARE software are up and running before opening any of these sites. crictime.com - this site offers 6 live streaming servers that offer World Cup 2011 Cricket matches streams. Don’t mind the ads that are displayed left,right and center and just enjoy the cricket. Web pages dedicated for the world cup streaming are already live and you can bookmark them for your reference. cricfire.com/live-cricket: cricfire   gathers cricket live streams available around the web and provides them for easy access. Also they provide links for watching highlights and other post match analysis shows. Other sites that provide live streaming videos extracover.net webcric.com Searching for Unofficial Streams On Live Video Streaming Sites One of the best ways to find the unofficial streams is look for live streaming feeds on popular video streaming websites. We can be assured that these sites does not spread malware and spammy ads as they are well established. Here are the queries that you can use to search the popular sites FreedoCast  http://freedocast.com/search.aspx?go=cricket%20world%20cup Justin.tv      http://www.justin.tv/search?q=cricket+world+cup Ustream.tv  http://www.ustream.tv/discovery/live/all?q=cricket%20world%20cup TV Channels That Telecast Cricket World Cup Live Even though web is the place where we spend most of our time for entertainment, TVs are still popular for watching sports events. Mostly 90% of us are going to follow this cricket world cup matches on television sets. Here is the list of TV channels that paid whooping amounts of money for broadcasting rights and going to telecast live cricket Afghanistan – Ariana Television Network: Lemar TV Australia – Nine Network, Fox Sports Bangladesh – Bangladesh Television Canada – Asian Television Network China – ESPN Star Sports Europe (Except UK & Ireland) – Eurosport2 Fiji – Fiji TV India – ESPN Star Sports, Star Cricket, DD National (mostly India matches alone) Ireland – Zee Cafe Jamaica – Television Jamaica Middle East – Arab Radio and Television Network Nepal – ESPN Star Sports New Zealand – Sky Sport Pacific Islands – Sky Pacific Pakistan – GEO Super, Pakistan Television Corporation Pan-Africa – South African Broadcasting Corporation Singapore – Star Cricket South Africa – Supersport, Sabc3 Sport Sri Lanka – Sri Lanka Rupavahini Corporation United Kingdom – Sky Sports HD USA – Willow Cricket, DirecTV, Dish Network West Indies – Caribbean Media Corporation Radio Stations That Provide Live Commentary Don’t we listen to radio? Yes we still listen to radios, especially when we are on the go. Radios are part of our mobiles as well as music players like iPods. Here are the stations that you can tune into for catching live cricket commentary Australia – ABC Local Radio Bangladesh – Bangladesh Betar Canada , Central America – EchoStar India – All India Radio Pakistan, United Arab Emirates – Hum FM Sri Lanka – FM Derana United Kingdom, Ireland – BBC Radio West Indies – Caribbean Media Corporation Watch World Cup Cricket On Your Mobile This section is for Indian users. 3G rollout is happening at very high pace in all part of the India and most of the metros and towns are able to access 3G services. With 3G on your mobile you will be able to watch live ICC world cricket on your Reliance Mobiles and you can read more about it here. Top 10 Cricket Websites Check out our earlier post on top 10 cricket web sites for information. This article titled,ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Add Your Gmail Account to Outlook 2010 using POP

  - by Matthew Guay

  Are you excited about the latest version of Outlook, and want to get it setup with your Gmail accounts?  Here’s how you can easily add your Gmail account using POP to Outlook 2010. Getting Started Log into your Gmail account an go to your settings page. Under the Forwarding and POP/IMAP tab make sure POP is enabled.  You can choose to enable POP access for all new mail that arrives from now on, or for all mail in your Gmail account.  On the second option, we suggest you chose keep Gmail’s copy in the Inbox so you can still access your emails on the Gmail server.   Add Your Account to Outlook 2010 If you haven’t run Outlook 2010 yet, click Next to start setup and add your email account. Select Yes to add an email account to Outlook.  Now you’re ready to start entering your settings to access your email. Or, if you’ve already been using Outlook and want to add a new POP account, click File and then select Add Account under Account Information.   Outlook 2010 can often automatically find and configure your account with just your email address and password, so enter these and click Next to let Outlook try to set it up automatically. Outlook will now scan for the settings for your email account. If Outlook was able to find settings and configure your account automatically, you’ll see this success screen.  Depending on your setup, Gmail is automatically setup, but sometimes it fails to find the settings.  If this is the case, we’ll go back and manually configure it. Manually Configure Outlook for Gmail Back at the account setup screen, select Manually configure server settings or additional server types and click Next. Select Internet E-mail and then click Next. Enter your username, email address, and log in information. Under Server information enter in the following: Account Type: POP3 Incoming mail server: pop.gmail.com Outgoing mail server: smtp.gmail.com Make sure to check Remember password so you don’t have to enter it every time. After that data is entered in, click on the More Settings button. Select the Outgoing Server tab, and check My outgoing server (SMTP) requires authentication.  Verify Use same settings as my incoming mail server is marked as well. Next select the Advanced tab and enter the following information: Incoming Server (POP3): 995 Outgoing server (SMTP): 587 Check This server requires an encrypted connection (SSL) Set Use the following type of encrypted connection to TLS You also might want to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from Gmail online. Click OK to close the window, and then click Next to finish setting up the account.  Outlook will test your account settings to make sure everything will work; click Close when this is finished. Provided everything was entered in correctly, you’ll be greeted with a successful setup message…click Finish.   Gmail will be all ready to sync with Outlook 2010.  Enjoy your Gmail account in Outlook, complete with fast indexed searching, conversation view, and more! Conclusion Adding Gmail using the POP setting to Outlook 2010 is usually easy and only takes a few steps.  Even if you have to enter your settings manually, it is still a fairly simple process. You can add multiple email accounts using POP3 if you wish, and if you’d like to sync IMAP accounts, check out our tutorial on setting up Gmail using IMAP in Outlook 2010. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailAdd Your Gmail Account to Outlook 2007Use Gmail IMAP in Microsoft Outlook 2007Figure out which Online accounts are selling your email to spammersAdd Your Gmail Account to Outlook 2010 Using IMAP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Using the “Settings.settings” functionalities in VB.NET can be tricky…

  - by Vincent Grondin

  Sometime you’re searching for something forever and when you find it, you realize it was right under your nose.  Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post…   That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application…  I thought it was a cool feature and I decided to use it…  So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine...  That was before I decided to modify the “Value” of one of my settings…  After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing!  Hmmm… That’s odd…  My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done…  So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!!  Alright, you rock VB.NET!  You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch…  I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again.  Huh?  Where are my darn strings????????  Ok there’s a bug there…  I open up the app.config and my new strings are there!!!  Alright, let’s recap…  My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime…  Hmmmm?  Let’s try something else…  Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM!  My strings where there!  I “alt-tab” and hit “F5” and BOOM, no strings!  So it’s a bug in the Visual Studio environment… or could it be a FEATURE?  I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol!   Finally I found out there’s a “cache” for your Visual Studio located here:  C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer…  See the big “Synchronize” button there?  Yep…  Now that’s user friendly isn’t it?  Oh, and wait until you see what it does when you click it…  It prompts you and basically says:  “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”…  Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure!  Oh and I almost forgot… this great “feature” is only available for VB.NET…  A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well…   Maybe it’s simply related to the StringCollection data type?  If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

  Read the article

• Integrate BING API for Search inside ASP.Net web application

  - by sreejukg

  As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

  Read the article

• Can't install wine (or ia32-libs) in Ubuntu 12.10 64 bit

  - by carestad

  As already pointed out here, people seems to have issues with installing wine in the latest version of Ubuntu. I'm suspecting this only happens with 64 bit users. For example, when trying to install wine, wine1.4, wine1.4:i386, wine1.5, wine1.5:i386, ia32-libs or ia32-libs:i386 with apt-get, I get a lot of dependency errors. Doing a sudo apt-get -f install doesn't seem to do the trick, neither does using aptitude. The errors I get is normally that the packages depend on some :i386 package, but installing those manually doesn't work either because they also have dependency issues (isn't APT supposed to do this automatically?!). I also downloaded CrossOver today and tried installing the .deb manually, but the dependency issues show up there as well. When running sudo apt-get -f install after trying to install the CrossOver .deb, apt-get wants to purge the following packages: ia32-crossover intel-gpu-tools libdrm-nouveau2 libgl1-mesa-dri libva-x11-1 ubuntu-desktop vlc xorg xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-modesetting xserver-xorg-video-openchrome xserver-xorg-video-radeon xserver-xorg-video-vmware What I've tried so far (and didn't work): Installing synaptic, reloading my repositories, searching for ia32 and installing ia32-libs. Using Ubuntu Software Center to install Wine and ia32-libs. Using apt-get and aptitude to install all the differend varieties of the wine packages, both with and without the :i386 and -amd64 suffixes in package names. Disabling the universe and multiverse repos, run a sudo apt-get update and then re-enable them again. Boot a newly downloaded Ubuntu 12.10 x64 live USB and try to install all the different packages there. What I haven't tried (yet): Boot a newly downloaded Ubuntu 12.10 x32 image and try to install wine there (I'm just guessing that will work). Reinstall Ubuntu. Throw my computer out a window. wine alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. wine-1.4 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4 (...) The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.4:i386 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.4:i386 : Depends: wine1.4-i386:i386 (= 1.4.1-0ubuntu1) Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. wine-1.5 alexander@cosmo:~$ sudo apt-get install wine1.5 (...) The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.5:i386 alexander@cosmo:~$ sudo apt-get install wine1.5:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.5:i386 : Depends: wine1.5-i386:i386 (= 1.5.16-0ubuntu1) but it is not going to be installed Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. ia32-libs alexander@cosmo:~$ sudo apt-get install ia32-libs (...) The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. ia32-libs:i386 alexander@cosmo:~$ sudo apt-get install ia32-libs:i386 (...) Package ia32-libs:i386 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 lib32asound2 E: Package 'ia32-libs:i386' has no installation candidate

  Read the article

• Some New .NET Toys (Repost)

  - by Kevin Grossnicklaus

  Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit. It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft. The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of. The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today. Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1. You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)? Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox). With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target. Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks. Other projects can now reference this portable library and be provided assemblies custom built to their environment. This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight. You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model. Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here. You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/. This site allows you to easily search for small samples of code related to a particular technology or platform. If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs. You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others. Samples are packaged into the VS .vsix format and include any necessary references/dependencies. By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done. Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need. I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities. Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results. First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from. For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings. All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

  Read the article

• OPN Oracle ECM 10g R3 Implementation Boot Camp - (12-14/Abr/10)

  - by Claudia Costa

  É com entusiasmo que lhe anunciamos o bootcamp de Oracle ECM 10g R3 Implementation que irá realizar nos dias 12-14 de Abril  que abordará os tópicos abaixo descritos. Com o objectivo de ajudar os parceiros a desenvolver competências, a Oracle University e a Oracle Alliances&Channel, desenharam este bootcamp, compactando os conteúdos e reduzindo assim os custos. Preço por participante (3 dias) - 1.250 Eur + Iva  Oracle offers the most unified, usable enterprise content management platform in today's market. With centralized control across single or multiple repositories, common core functionality, and easily scalable content management capabilities, Oracle provides content management solutions for many content types and users-wherever they work in the enterprise.   The Oracle Enterprise Content Management (ECM) Implementation Boot Camp examines the fundamental concepts, techniques, and architecture of Oracle's ECM technologies. Join this training to learn how you can manage and maintain unstructured content   Target Audience:  The Oracle ECM Implementation Boot Camp is designed for architects, technical consultants, team/project leaders and functional consultants of our system integrator partners who want to ramp-up on ECM technology.   Contents:  The ECM Implementation Boot Camp is a three-day hands-on workshop, designed for Oracle Partners who are new to ECM, and will provide implementation instruction on the ECM technology offered by Oracle. The boot camp will: • Provide hands-on experience in implementing Oracle's truly unified, open and standard base ECM technology • Provide the strategic direction about Oracle's Fusion Middleware/Enterprise 2.0 and its role in composite application development • Expose broad set of Oracle's ECM technologies.   Objectives: The Oracle ECM Implementation Boot Camp is primarily focused on the Oracle's ECM offering to manage and maintain unstructured content and covers Universal Content Management (UCM), Image and Process Management (IPM), Universal Records Management (URM), and Information Rights Management (IRM):   Topics Covered • Introduction to Oracle UCM o UCM Overview o UCM Architecture Overview • Content Server and Document Management basics o Installation and Administration Skills § User and Security Admin § Configuration (metadata, DCLs, profiles, rules, etc.) § Workflow Admin § System Properties and Component Manager § Managing Subscriptions o Contributing Content § Browser form § WebDAV folder § Desktop Integration o Searching • Web Content Management o Site Studio • Universal Records Management • Information Right Management (IRM) • Image & Process Management (IPM) • Oracle Document Capture • Oracle eMail Archive Service. Labs • Content Server Installation • Use and Administration of Content Server • Introduction to Site Studio • Use and Administration of Records Manager Demo: The R&D Group and the New Patent Focus: Information Rights Management, Knowledge Management, Accounts Payable Image Automation, Imaging and Process Management Case Study Use Case 1: Enable City of Xalco to streamline internal processes by empowering city employees to quickly and efficiently manage and publish information on their employee intranet and eventually public Web site. Use Case 2: Help Acme & Co in archiving its goal is to become "paperless" by managing all of their company's business content in a central, Web-based repository. Acme's business content ranges from policies and procedures to Employee listings and marketing materials.   Agenda: Day 1 ·         ECM Overview & Content Server ·         ECM Overview ·         ECM Architecture and Installation ·         UCM and Digital Asset Management DEMO ·         Lab 1 - Content Server Installation ·         Lab 2 - Use and Administration of Content Server   Day 2 ·         Web Content Management ·         Lab 2 - Use and Administration of Content ·         Server (continued) ·         Introduction to Web Content Management ·         Lab 3 - Site Studio   Day 3 ·         URM/IRM/IPM ·         Introduction to Universal Records Management ·         Lab 4 - URM ·         Introduction to Information Rights Management ·         Information Rights Management DEMO ·         Introduction to Image and Process Management ·         Image and Process Management Demo ·         Oracle Document Capture ·         Oracle eMail Archive   Material needed for Bootcamp: This Boot camp requires attendees to provide their own laptops for this class. Attendee laptops must meet the following minimum hardware/software requirements: Hardware • RAM: 2GB RM minimum (1 GB RAM is not enough) • HDD: 15 GB free HDD space   Pre requistes: To ensure a valuable learning experience, participation in this boot camp requires completing the prerequisite courses and successfully passing the prerequisite assessment test that is mapped into the Oracle Enterprise Content Management Implementation Boot Camp guided learning path. At a minimum, participants with equivalent skills and background should review the guided learning path and successfully pass the prerequisite assessment test to ensure they possess the background necessary to benefit from participation in the boot Camp.   ---------------------------------------------------------------------   Para mais informações/inscrições, contacte: Mónica Pires  21 423 51 44 Horário e Local 9:30h - 12:30h e 14:00h - 17:00 ( 6 horas/dia )Oracle, Porto Salvo - Oeiras.

  Read the article

• The Top Ten Security Top Ten Lists

  - by Troy Kitch

  As a marketer, we're always putting together the top 3, or 5 best, or an assortment of top ten lists. So instead of going that route, I've put together my top ten security top ten lists. These are not only for security practitioners, but also for the average Joe/Jane; because who isn't concerned about security these days? Now, there might not be ten for each one of these lists, but the title works best that way. Starting with my number ten (in no particular order): 10. Top 10 Most Influential Security-Related Movies Amrit Williams pulls together a great collection of security-related movies. He asks for comments on which one made you want to get into the business. I would have to say that my most influential movie(s), that made me want to get into the business of "stopping the bad guys" would have to be the James Bond series. I grew up on James Bond movies: thwarting the bad guy and saving the world. I recall being both ecstatic and worried when Silicon Valley-themed "A View to A Kill" hit theaters: "An investigation of a horse-racing scam leads 007 to a mad industrialist who plans to create a worldwide microchip monopoly by destroying California's Silicon Valley." Yikes! 9. Top Ten Security Careers From movies that got you into the career, here’s a top 10 list of security-related careers. It starts with number then, Information Security Analyst and ends with number one, Malware Analyst. They point out the significant growth in security careers and indicate that "according to the Bureau of Labor Statistics, the field is expected to experience growth rates of 22% between 2010-2020. If you are interested in getting into the field, Oracle has many great opportunities all around the world.  8. Top 125 Network Security Tools A bit outside of the range of 10, the top 125 Network Security Tools is an important list because it includes a prioritized list of key security tools practitioners are using in the hacking community, regardless of whether they are vendor supplied or open source. The exhaustive list provides ratings, reviews, searching, and sorting. 7. Top 10 Security Practices I have to give a shout out to my alma mater, Cal Poly, SLO: Go Mustangs! They have compiled their list of top 10 practices for students and faculty to follow. Educational institutions are a common target of web based attacks and miscellaneous errors according to the 2014 Verizon Data Breach Investigations Report.    6. (ISC)2 Top 10 Safe and Secure Online Tips for Parents This list is arguably the most important list on my list. The tips were "gathered from (ISC)2 member volunteers who participate in the organization’s Safe and Secure Online program, a worldwide initiative that brings top cyber security experts into schools to teach children ages 11-14 how to protect themselves in a cyber-connected world…If you are a parent, educator or organization that would like the Safe and Secure Online presentation delivered at your local school, or would like more information about the program, please visit here.” 5. Top Ten Data Breaches of the Past 12 Months This type of list is always changing, so it's nice to have a current one here from Techrader.com. They've compiled and commented on the top breaches. It is likely that most readers here were effected in some way or another. 4. Top Ten Security Comic Books Although mostly physical security controls, I threw this one in for fun. My vote for #1 (not on the list) would be Professor X. The guy can breach confidentiality, integrity, and availability just by messing with your thoughts. 3. The IOUG Data Security Survey's Top 10+ Threats to Organizations The Independent Oracle Users Group annual survey on enterprise data security, Leaders Vs. Laggards, highlights what Oracle Database users deem as the top 12 threats to their organization. You can find a nice graph on page 9; Figure 7: Greatest Threats to Data Security. 2. The Ten Most Common Database Security Vulnerabilities Though I don't necessarily agree with all of the vulnerabilities in this order...I like a list that focuses on where two-thirds of your sensitive and regulated data resides (Source: IDC).  1. OWASP Top Ten Project The Online Web Application Security Project puts together their annual list of the 10 most critical web application security risks that organizations should be including in their overall security, business risk and compliance plans. In particular, SQL injection risks continues to rear its ugly head each year. Oracle Audit Vault and Database Firewall can help prevent SQL injection attacks and monitor database and system activity as a detective security control. Did I miss any?

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >