Search Results

Search found 5261 results on 211 pages for 'includes'.

Page 190/211 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• Fun with Aggregates

  - by Paul White

  There are interesting things to be learned from even the simplest queries.  For example, imagine you are given the task of writing a query to list AdventureWorks product names where the product has at least one entry in the transaction history table, but fewer than ten. One possible query to meet that specification is: SELECT p.Name FROM Production.Product AS p JOIN Production.TransactionHistory AS th ON p.ProductID = th.ProductID GROUP BY p.ProductID, p.Name HAVING COUNT_BIG(*) < 10; That query correctly returns 23 rows (execution plan and data sample shown below): The execution plan looks a bit different from the written form of the query: the base tables are accessed in reverse order, and the aggregation is performed before the join.  The general idea is to read all rows from the history table, compute the count of rows grouped by ProductID, merge join the results to the Product table on ProductID, and finally filter to only return rows where the count is less than ten. This ‘fully-optimized’ plan has an estimated cost of around 0.33 units.  The reason for the quote marks there is that this plan is not quite as optimal as it could be – surely it would make sense to push the Filter down past the join too?  To answer that, let’s look at some other ways to formulate this query.  This being SQL, there are any number of ways to write logically-equivalent query specifications, so we’ll just look at a couple of interesting ones.  The first query is an attempt to reverse-engineer T-SQL from the optimized query plan shown above.  It joins the result of pre-aggregating the history table to the Product table before filtering: SELECT p.Name FROM ( SELECT th.ProductID, cnt = COUNT_BIG(*) FROM Production.TransactionHistory AS th GROUP BY th.ProductID ) AS q1 JOIN Production.Product AS p ON p.ProductID = q1.ProductID WHERE q1.cnt < 10; Perhaps a little surprisingly, we get a slightly different execution plan: The results are the same (23 rows) but this time the Filter is pushed below the join!  The optimizer chooses nested loops for the join, because the cardinality estimate for rows passing the Filter is a bit low (estimate 1 versus 23 actual), though you can force a merge join with a hint and the Filter still appears below the join.  In yet another variation, the < 10 predicate can be ‘manually pushed’ by specifying it in a HAVING clause in the “q1” sub-query instead of in the WHERE clause as written above. The reason this predicate can be pushed past the join in this query form, but not in the original formulation is simply an optimizer limitation – it does make efforts (primarily during the simplification phase) to encourage logically-equivalent query specifications to produce the same execution plan, but the implementation is not completely comprehensive. Moving on to a second example, the following query specification results from phrasing the requirement as “list the products where there exists fewer than ten correlated rows in the history table”: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) < 10 ); Unfortunately, this query produces an incorrect result (86 rows): The problem is that it lists products with no history rows, though the reasons are interesting.  The COUNT_BIG(*) in the EXISTS clause is a scalar aggregate (meaning there is no GROUP BY clause) and scalar aggregates always produce a value, even when the input is an empty set.  In the case of the COUNT aggregate, the result of aggregating the empty set is zero (the other standard aggregates produce a NULL).  To make the point really clear, let’s look at product 709, which happens to be one for which no history rows exist: -- Scalar aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709;   -- Vector aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709 GROUP BY th.ProductID; The estimated execution plans for these two statements are almost identical: You might expect the Stream Aggregate to have a Group By for the second statement, but this is not the case.  The query includes an equality comparison to a constant value (709), so all qualified rows are guaranteed to have the same value for ProductID and the Group By is optimized away. In fact there are some minor differences between the two plans (the first is auto-parameterized and qualifies for trivial plan, whereas the second is not auto-parameterized and requires cost-based optimization), but there is nothing to indicate that one is a scalar aggregate and the other is a vector aggregate.  This is something I would like to see exposed in show plan so I suggested it on Connect.  Anyway, the results of running the two queries show the difference at runtime: The scalar aggregate (no GROUP BY) returns a result of zero, whereas the vector aggregate (with a GROUP BY clause) returns nothing at all.  Returning to our EXISTS query, we could ‘fix’ it by changing the HAVING clause to reject rows where the scalar aggregate returns zero: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) BETWEEN 1 AND 9 ); The query now returns the correct 23 rows: Unfortunately, the execution plan is less efficient now – it has an estimated cost of 0.78 compared to 0.33 for the earlier plans.  Let’s try adding a redundant GROUP BY instead of changing the HAVING clause: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY th.ProductID HAVING COUNT_BIG(*) < 10 ); Not only do we now get correct results (23 rows), this is the execution plan: I like to compare that plan to quantum physics: if you don’t find it shocking, you haven’t understood it properly :)  The simple addition of a redundant GROUP BY has resulted in the EXISTS form of the query being transformed into exactly the same optimal plan we found earlier.  What’s more, in SQL Server 2008 and later, we can replace the odd-looking GROUP BY with an explicit GROUP BY on the empty set: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ); I offer that as an alternative because some people find it more intuitive (and it perhaps has more geek value too).  Whichever way you prefer, it’s rather satisfying to note that the result of the sub-query does not exist for a particular correlated value where a vector aggregate is used (the scalar COUNT aggregate always returns a value, even if zero, so it always ‘EXISTS’ regardless which ProductID is logically being evaluated). The following query forms also produce the optimal plan and correct results, so long as a vector aggregate is used (you can probably find more equivalent query forms): WHERE Clause SELECT p.Name FROM Production.Product AS p WHERE ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) < 10; APPLY SELECT p.Name FROM Production.Product AS p CROSS APPLY ( SELECT NULL FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ) AS ca (dummy); FROM Clause SELECT q1.Name FROM ( SELECT p.Name, cnt = ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) FROM Production.Product AS p ) AS q1 WHERE q1.cnt < 10; This last example uses SUM(1) instead of COUNT and does not require a vector aggregate…you should be able to work out why :) SELECT q.Name FROM ( SELECT p.Name, cnt = ( SELECT SUM(1) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID ) FROM Production.Product AS p ) AS q WHERE q.cnt < 10; The semantics of SQL aggregates are rather odd in places.  It definitely pays to get to know the rules, and to be careful to check whether your queries are using scalar or vector aggregates.  As we have seen, query plans do not show in which ‘mode’ an aggregate is running and getting it wrong can cause poor performance, wrong results, or both. © 2012 Paul White Twitter: @SQL_Kiwi email: [email protected]

  Read the article

• elffile: ELF Specific File Identification Utility

  - by user9154181

  Solaris 11 has a new standard user level command, /usr/bin/elffile. elffile is a variant of the file utility that is focused exclusively on linker related files: ELF objects, archives, and runtime linker configuration files. All other files are simply identified as "non-ELF". The primary advantage of elffile over the existing file utility is in the area of archives — elffile examines the archive members and can produce a summary of the contents, or per-member details. The impetus to add elffile to Solaris came from the effort to extend the format of Solaris archives so that they could grow beyond their previous 32-bit file limits. That work introduced a new archive symbol table format. Now that there was more than one possible format, I thought it would be useful if the file utility could identify which format a given archive is using, leading me to extend the file utility: % cc -c ~/hello.c % ar r foo.a hello.o % file foo.a foo.a: current ar archive, 32-bit symbol table % ar r -S foo.a hello.o % file foo.a foo.a: current ar archive, 64-bit symbol table In turn, this caused me to think about all the things that I would like the file utility to be able to tell me about an archive. In particular, I'd like to be able to know what's inside without having to unpack it. The end result of that train of thought was elffile. Much of the discussion in this article is adapted from the PSARC case I filed for elffile in December 2010: PSARC 2010/432 elffile Why file Is No Good For Archives And Yet Should Not Be Fixed The standard /usr/bin/file utility is not very useful when applied to archives. When identifying an archive, a user typically wants to know 2 things: Is this an archive? Presupposing that the archive contains objects, which is by far the most common use for archives, what platform are the objects for? Are they for sparc or x86? 32 or 64-bit? Some confusing combination from varying platforms? The file utility provides a quick answer to question (1), as it identifies all archives as "current ar archive". It does nothing to answer the more interesting question (2). To answer that question, requires a multi-step process: Extract all archive members Use the file utility on the extracted files, examine the output for each file in turn, and compare the results to generate a suitable summary description. Remove the extracted files It should be easier and more efficient to answer such an obvious question. It would be reasonable to extend the file utility to examine archive contents in place and produce a description. However, there are several reasons why I decided not to do so: The correct design for this feature within the file utility would have file examine each archive member in turn, applying its full abilities to each member. This would be elegant, but also represents a rather dramatic redesign and re-implementation of file. Archives nearly always contain nothing but ELF objects for a single platform, so such generality in the file utility would be of little practical benefit. It is best to avoid adding new options to standard utilities for which other implementations of interest exist. In the case of the file utility, one concern is that we might add an option which later appears in the GNU version of file with a different and incompatible meaning. Indeed, there have been discussions about replacing the Solaris file with the GNU version in the past. This may or may not be desirable, and may or may not ever happen. Either way, I don't want to preclude it. Examining archive members is an O(n) operation, and can be relatively slow with large archives. The file utility is supposed to be a very fast operation. I decided that extending file in this way is overkill, and that an investment in the file utility for better archive support would not be worth the cost. A solution that is more narrowly focused on ELF and other linker related files is really all that we need. The necessary code for doing this already exists within libelf. All that is missing is a small user-level wrapper to make that functionality available at the command line. In that vein, I considered adding an option for this to the elfdump utility. I examined elfdump carefully, and even wrote a prototype implementation. The added code is small and simple, but the conceptual fit with the rest of elfdump is poor. The result complicates elfdump syntax and documentation, definite signs that this functionality does not belong there. And so, I added this functionality as a new user level command. The elffile Command The syntax for this new command is elffile [-s basic | detail | summary] filename... Please see the elffile(1) manpage for additional details. To demonstrate how output from elffile looks, I will use the following files: FileDescription configA runtime linker configuration file produced with crle dwarf.oAn ELF object /etc/passwdA text file mixed.aArchive containing a mixture of ELF and non-ELF members mixed_elf.aArchive containing ELF objects for different machines not_elf.aArchive containing no ELF objects same_elf.aArchive containing a collection of ELF objects for the same machine. This is the most common type of archive. The file utility identifies these files as follows: % file config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: ascii text mixed.a: current ar archive, 32-bit symbol table mixed_elf.a: current ar archive, 32-bit symbol table not_elf.a: current ar archive same_elf.a: current ar archive, 32-bit symbol table By default, elffile uses its "summary" output style. This output differs from the output from the file utility in 2 significant ways: Files that are not an ELF object, archive, or runtime linker configuration file are identified as "non-ELF", whereas the file utility attempts further identification for such files. When applied to an archive, the elffile output includes a description of the archive's contents, without requiring member extraction or other additional steps. Applying elffile to the above files: % elffile config dwarf.o /etc/passwd mixed.a mixed_elf.a not_elf.a same_elf.a config: Runtime Linking Configuration 64-bit MSB SPARCV9 dwarf.o: ELF 64-bit LSB relocatable AMD64 Version 1 /etc/passwd: non-ELF mixed.a: current ar archive, 32-bit symbol table, mixed ELF and non-ELF content mixed_elf.a: current ar archive, 32-bit symbol table, mixed ELF content not_elf.a: current ar archive, non-ELF content same_elf.a: current ar archive, 32-bit symbol table, ELF 64-bit LSB relocatable AMD64 Version 1 The output for same_elf.a is of particular interest: The vast majority of archives contain only ELF objects for a single platform, and in this case, the default output from elffile answers both of the questions about archives posed at the beginning of this discussion, in a single efficient step. This makes elffile considerably more useful than file, within the realm of linker-related files. elffile can produce output in two other styles, "basic", and "detail". The basic style produces output that is the same as that from 'file', for linker-related files. The detail style produces per-member identification of archive contents. This can be useful when the archive contents are not homogeneous ELF object, and more information is desired than the summary output provides: % elffile -s detail mixed.a mixed.a: current ar archive, 32-bit symbol table mixed.a(dwarf.o): ELF 32-bit LSB relocatable 80386 Version 1 mixed.a(main.c): non-ELF content mixed.a(main.o): ELF 64-bit LSB relocatable AMD64 Version 1 [SSE]

  Read the article

• PASS: The Budget Process

  - by Bill Graziano

  Every fiscal year PASS creates a detailed budget.  This helps us set priorities and communicate to our members what we’re going to do in the upcoming year.  You can review the current budget on the PASS Governance page.  That page currently requires you to login but I’m talking with HQ to see if there are any legal issues with opening that up. The Accounting Team The PASS accounting team is two people.  The Executive Vice-President of Finance (“EVP”) and the PASS Accounting Manager.  Sandy Cherry is the accounting manager and works at PASS HQ.  Sandy has been with PASS since we switched management companies in 2007.  Throughout this document when I talk about any actual work related to the budget that’s all Sandy :)  She’s the glue that gets us through this process.  Last year we went through 32 iterations of the budget before the Board approved so it’s a pretty busy time for her us – well, mostly her. Fiscal Year The PASS fiscal year runs from July 1st through June 30th the following year.  Right now we’re in fiscal year 2011.  Our 2010 Summit actually occurred in FY2011.  We switched to this schedule from a calendar year in 2006.  Our goal was to have the Summit occur early in our fiscal year.  That gives us the rest of the year to handle any significant financial impact from the Summit.  If registrations are down we can reduce spending.  If registrations are up we can decide how much to increase our reserves and how much to spend.  Keep in mind that the Summit is budgeted to generate 82% of our revenue this year.  How it performs has a significant impact on our financials.  The other benefit of this fiscal year is that it matches the Microsoft fiscal year.  We sign an annual sponsorship agreement with Microsoft and it’s very helpful that our fiscal years match. This year our budget process will probably start in earnest in March or April.  I’d like to be done in early June so we can publish before July 1st.  I was late publishing it this year and I’m trying not to repeat that. Our Budget Our actual budget is an Excel spreadsheet with 36 sheets.  We remove some of those when we publish it since they include salary information.  The budget is broken up into various portfolios or departments.  We have 20 portfolios.  They include chapters, marketing, virtual chapters, marketing, etc.  Ideally each portfolio is assigned to a Board member.  Each portfolio also typically has a staff person assigned to it.  Portfolios that aren’t assigned to a Board member are monitored by HQ and the ExecVP-Finance (me).  These are typically smaller portfolios such as deferred membership or Summit futures.  (More on those in a later post.)  All portfolios are reviewed by all Board members during the budget approval process, when interim financials are released internally and at year-end. The Process Our first step is to budget revenues.  The Board determines a target attendee number.  We have formulas based on historical performance that convert that to an overall attendee revenue number.  Other revenue projections (such as vendor sponsorships) come from different parts of the organization.  I hope to have another post with more details on how we project revenues. The next step is to budget expenses.  Board members fill out a sample spreadsheet with their budget for the year.  They can add line items and notes describing what the amounts are for.  Each Board portfolio typically has from 10 to 30 line items.  Any new initiatives they want to pursue needs to be budgeted.  The Summit operations budget is managed by HQ.  It includes the cost for food, electrical, internet, etc.  Most of these come from our estimate of attendees and our contract with the convention center.  During this process the Board can ask for more or less to be spent on various line items.  For example, if we weren’t happy with the Internet at the last Summit we can ask them to look into different options and/or increasing the budget.  HQ will also make adjustments to these numbers based on what they see at the events and the feedback we receive on the surveys. After we have all the initial estimates we start reviewing the entire budget.  It is sent out to the Board and we can see what each portfolio requested and what the overall profit and loss number is.  We usually start with too much in expenses and need to cut.  In years past the Board started haggling over these numbers as a group.  This past year they decided I should take a first cut and present them with a reasonable budget and a list of what I changed.  That worked well and I think we’ll continue to do that in the future. We go through a number of iterations on the budget.  If I remember correctly, we went through 32 iterations before we passed the budget.  At each iteration various revenue and expense numbers can change.  Keep in mind that the PASS budget has 200+ line items spread over 20 portfolios.  Many of these depend on other numbers.  For example, if we decide increase the projected attendees that cascades through our budget.  At each iteration we list what changed and the impact.  Ideally these discussions will take place at a face-to-face Board meeting.  Many of them also take place over the phone.  Board members explain any increase they are asking for while performing due diligence on other budget requests.  Eventually a budget emerges and is passed. Publishing After the budget is passed we create a version without the formulas and salaries for posting on the web site.  Sandy also creates some charts to help our members understand the budget.  The EVP writes a nice little letter describing some of the changes from last year’s budget.  You can see my letter and our budget on the PASS Governance page. And then, eight months later, we start all over again.

  Read the article

• Free Document/Content Management System Using SharePoint 2010

  - by KunaalKapoor

  That’s right, it’s true. You can use the free version of SharePoint 2010 to meet your document and content management needs and even run your public facing website or an internal knowledge bank.  SharePoint Foundation 2010 is free. It may not have all the features that you get in the enterprise license but it still has enough to cater to your needs to build a document management system and replace age old file shares or folders. I’ve built a dozen content management sites for internal and public use exploiting SharePoint. There are hundreds of web content management systems out there (see CMS Matrix).  On one hand we have commercial platforms like SharePoint, SiteCore, and Ektron etc. which are the most frequently used and on the other hand there are free options like WordPress, Drupal, Joomla, and Plone etc. which are pretty common popular as well. But I would be very surprised if anyone was able to find a single CMS platform that is all things to all people. Infact not a lot of people consider SharePoint’s free version under the free CMS side but its high time organizations benefit from this. Through this blog post I wanted to present SharePoint Foundation as an option for running a FREE CMS platform. Even if you knew that there is a free version of SharePoint, what most people don’t realize is that SharePoint Foundation is a great option for running web sites of all kinds – not just team sites. It is a great option for many reasons, but in reality it is supported by Microsoft, and above all it is FREE (yay!), and it is extremely easy to get started.  From a functionality perspective – it’s hard to beat SharePoint. Even the free version, SharePoint Foundation, offers simple data connectivity (through BCS), cross browser support, accessibility, support for Office Web Apps, blogs, wikis, templates, document support, health analyzer, support for presence, and MUCH more.I often get asked: “Can I use SharePoint 2010 as a document management system?” The answer really depends on ·          What are your specific requirements? ·          What systems you currently have in place for managing documents. ·          And of course how much money you have J Benefits? Not many large organizations have benefited from SharePoint yet. For some it has been an IT project to see what they can achieve with it, for others it has been used as a collaborative platform or in many cases an extended intranet. SharePoint 2010 has changed the game slightly as the improvements that Microsoft have made have been noted by organizations, and we are seeing a lot of companies starting to build specific business applications using SharePoint as the basis, and nearly every business process will require documents at some stage. If you require a document management system and have SharePoint in place then it can be a relatively straight forward decision to use SharePoint, as long as you have reviewed the considerations just discussed. The collaborative nature of SharePoint 2010 is also a massive advantage, as specific departmental or project sites can be created quickly and easily that allow workers to interact in a variety of different ways using one source of information.  This also benefits an organization with regards to how they manage the knowledge that they have, as if all of their information is in one source then it is naturally easier to search and manage. Is SharePoint right for your organization? As just discussed, this can only be determined after defining your requirements and also planning a longer term strategy for how you will manage your documents and information. A key factor to look at is how the users would interact with the system and how much value would it get for your organization. The amount of data and documents that organizations are creating is increasing rapidly each year. Therefore the ability to archive this information, whilst keeping the ability to know what you have and where it is, is vital to any organizations management of their information life cycle. SharePoint is best used for the initial life of business documents where they need to be referenced and accessed after time. It is often beneficial to archive these to overcome for storage and performance issues. FREE CMS – SharePoint, Really? In order to show some of the completely of what comes with this free version of SharePoint 2010, I thought it would make sense to use Wikipedia (since every one trusts it as a credible source). Wikipedia shows that a web content management system typically has the following components: Document Management:   -       CMS software may provide a means of managing the life cycle of a document from initial creation time, through revisions, publication, archive, and document destruction. SharePoint is king when it comes to document management.  Version history, exclusive check-out, security, publication, workflow, and so much more.  Content Virtualization:   -       CMS software may provide a means of allowing each user to work within a virtual copy of the entire Web site, document set, and/or code base. This enables changes to multiple interdependent resources to be viewed and/or executed in-context prior to submission. Through the use of versioning, each content manager can preview, publish, and roll-back content of pages, wiki entries, blog posts, documents, or any other type of content stored in SharePoint.  The idea of each user having an entire copy of the website virtualized is a bit odd to me – not sure why anyone would need that for anything but the simplest of websites. Automated Templates:   -       Create standard output templates that can be automatically applied to new and existing content, allowing the appearance of all content to be changed from one central place. Through the use of Master Pages and Themes, SharePoint provides the ability to change the entire look and feel of site.  Of course, the older brother version of SharePoint – SharePoint Server 2010 – also introduces the concept of Page Layouts which allows page template level customization and even switching the layout of an individual page using different page templates.  I think many organizations really think they want this but rarely end up using this bit of functionality.  Easy Edits:   -       Once content is separated from the visual presentation of a site, it usually becomes much easier and quicker to edit and manipulate. Most WCMS software includes WYSIWYG editing tools allowing non-technical individuals to create and edit content. This is probably easier described with a screen cap of a vanilla SharePoint Foundation page in edit mode.  Notice the page editing toolbar, the multiple layout options…  It’s actually easier to use than Microsoft Word. Workflow management: -       Workflow is the process of creating cycles of sequential and parallel tasks that must be accomplished in the CMS. For example, a content creator can submit a story, but it is not published until the copy editor cleans it up and the editor-in-chief approves it. Workflow, it’s in there. In fact, the same workflow engine is running under SharePoint Foundation that is running under the other versions of SharePoint.  The primary difference is that with SharePoint Foundation – you need to configure the workflows yourself.   Web Standards: -       Active WCMS software usually receives regular updates that include new feature sets and keep the system up to current web standards. SharePoint is in the fourth major iteration under Microsoft with the 2010 release.  In addition to the innovation that Microsoft continuously adds, you have the entire global ecosystem available. Scalable Expansion:   -       Available in most modern WCMSs is the ability to expand a single implementation (one installation on one server) across multiple domains. SharePoint Foundation can run multiple sites using multiple URLs on a single server install.  Even more powerful, SharePoint Foundation is scalable and can be part of a multi-server farm to ensure that it will handle any amount of traffic that can be thrown at it. Delegation & Security:  -       Some CMS software allows for various user groups to have limited privileges over specific content on the website, spreading out the responsibility of content management. SharePoint Foundation provides very granular security capabilities. Read @ http://msdn.microsoft.com/en-us/library/ee537811.aspx Content Syndication:  -       CMS software often assists in content distribution by generating RSS and Atom data feeds to other systems. They may also e-mail users when updates are available as part of the workflow process. SharePoint Foundation nails it.  With RSS syndication and email alerts available out of the box, content syndication is already in the platform. Multilingual Support: -       Ability to display content in multiple languages. SharePoint Foundation 2010 supports more than 40 languages. Read More Read more @ http://msdn.microsoft.com/en-us/library/dd776256(v=office.12).aspxYou can download the free version from http://www.microsoft.com/en-us/download/details.aspx?id=5970

  Read the article

• CodePlex Daily Summary for Thursday, September 06, 2012

  CodePlex Daily Summary for Thursday, September 06, 2012Popular Releasesmenu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.Active Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comExt Spec: Ext Spec 0.2.1: Refined examples and improved distribution options.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsAny-Service: AnyService is a .net 4.0 Windows service shell. It hosts any windows application in non-gui mode to run as a service.BabyCloudDrives - the multi cloud drive desktop's application: wpf ????BLACK ORANGE: Download The HPAD TEXT EDITOR and use it Wisely.. CodePlex New Release Checker: CodePlex New Release Checker is a small library that makes it easy to add, "New Version Available!" functionality to your CodePlex project.Collect: ????????！CSVManager: CSV??CSV?????，????CSV??，??????Exam Project: My Exam Project. Computer Vision, C and OpenCV-FTP: Hey guys thanks for checking out my ftp!Haushaltsbuch: 1ModMaker.Lua: ModMaker.Lua is an open source .NET library that parses and executes Lua code.MyJabbr: MyJabbr netduinoscope: Design shield and software to use netduino as oscilloscopeNetSurveillance Web Application: Net Surveillance Web ApplicationNiconicoApiHelper: ????API?????????OStega: A simple library for encrypt text into an bmp or png image.OURORM: ormTFS Cloud Deployment Toolkit: The TFS Cloud Deployment Toolkit is a set of tools that integrate with TFS 2010 to help manage configuration and deployment to various remote environments.The Visual Guide for Building Team Foundation Server 2012 Environments: A step-by-step guide for building Team Foundation Server 2012 environments that include SharePoint Server 2010, SQL Server 2012, Windows Server 2012 and more!WinRT LineChart: An attempt at creating an usable LineChart for everyone to use in his/her own Windows 8 Apps

  Read the article

• PostSharp, Obfuscation, and IL

  - by simonc

  Aspect-oriented programming (AOP) is a relatively new programming paradigm. Originating at Xerox PARC in 1994, the paradigm was first made available for general-purpose development as an extension to Java in 2001. From there, it has quickly been adapted for use in all the common languages used today. In the .NET world, one of the primary AOP toolkits is PostSharp. Attributes and AOP Normally, attributes in .NET are entirely a metadata construct. Apart from a few special attributes in the .NET framework, they have no effect whatsoever on how a class or method executes within the CLR. Only by using reflection at runtime can you access any attributes declared on a type or type member. PostSharp changes this. By declaring a custom attribute that derives from PostSharp.Aspects.Aspect, applying it to types and type members, and running the resulting assembly through the PostSharp postprocessor, you can essentially declare 'clever' attributes that change the behaviour of whatever the aspect has been applied to at runtime. A simple example of this is logging. By declaring a TraceAttribute that derives from OnMethodBoundaryAspect, you can automatically log when a method has been executed: public class TraceAttribute : PostSharp.Aspects.OnMethodBoundaryAspect { public override void OnEntry(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Entering {0}.{1}.", method.DeclaringType.FullName, method.Name)); } public override void OnExit(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Leaving {0}.{1}.", method.DeclaringType.FullName, method.Name)); } } [Trace] public void MethodToLog() { ... } Now, whenever MethodToLog is executed, the aspect will automatically log entry and exit, without having to add the logging code to MethodToLog itself. PostSharp Performance Now this does introduce a performance overhead - as you can see, the aspect allows access to the MethodBase of the method the aspect has been applied to. If you were limited to C#, you would be forced to retrieve each MethodBase instance using Type.GetMethod(), matching on the method name and signature. This is slow. Fortunately, PostSharp is not limited to C#. It can use any instruction available in IL. And in IL, you can do some very neat things. Ldtoken C# allows you to get the Type object corresponding to a specific type name using the typeof operator: Type t = typeof(Random); The C# compiler compiles this operator to the following IL: ldtoken [mscorlib]System.Random call class [mscorlib]System.Type [mscorlib]System.Type::GetTypeFromHandle( valuetype [mscorlib]System.RuntimeTypeHandle) The ldtoken instruction obtains a special handle to a type called a RuntimeTypeHandle, and from that, the Type object can be obtained using GetTypeFromHandle. These are both relatively fast operations - no string lookup is required, only direct assembly and CLR constructs are used. However, a little-known feature is that ldtoken is not just limited to types; it can also get information on methods and fields, encapsulated in a RuntimeMethodHandle or RuntimeFieldHandle: // get a MethodBase for String.EndsWith(string) ldtoken method instance bool [mscorlib]System.String::EndsWith(string) call class [mscorlib]System.Reflection.MethodBase [mscorlib]System.Reflection.MethodBase::GetMethodFromHandle( valuetype [mscorlib]System.RuntimeMethodHandle) // get a FieldInfo for the String.Empty field ldtoken field string [mscorlib]System.String::Empty call class [mscorlib]System.Reflection.FieldInfo [mscorlib]System.Reflection.FieldInfo::GetFieldFromHandle( valuetype [mscorlib]System.RuntimeFieldHandle) These usages of ldtoken aren't usable from C# or VB, and aren't likely to be added anytime soon (Eric Lippert's done a blog post on the possibility of adding infoof, methodof or fieldof operators to C#). However, PostSharp deals directly with IL, and so can use ldtoken to get MethodBase objects quickly and cheaply, without having to resort to string lookups. The kicker However, there are problems. Because ldtoken for methods or fields isn't accessible from C# or VB, it hasn't been as well-tested as ldtoken for types. This has resulted in various obscure bugs in most versions of the CLR when dealing with ldtoken and methods, and specifically, generic methods and methods of generic types. This means that PostSharp was behaving incorrectly, or just plain crashing, when aspects were applied to methods that were generic in some way. So, PostSharp has to work around this. Without using the metadata tokens directly, the only way to get the MethodBase of generic methods is to use reflection: Type.GetMethod(), passing in the method name as a string along with information on the signature. Now, this works fine. It's slower than using ldtoken directly, but it works, and this only has to be done for generic methods. Unfortunately, this poses problems when the assembly is obfuscated. PostSharp and Obfuscation When using ldtoken, obfuscators don't affect how PostSharp operates. Because the ldtoken instruction directly references the type, method or field within the assembly, it is unaffected if the name of the object is changed by an obfuscator. However, the indirect loading used for generic methods was breaking, because that uses the name of the method when the assembly is put through the PostSharp postprocessor to lookup the MethodBase at runtime. If the name then changes, PostSharp can't find it anymore, and the assembly breaks. So, PostSharp needs to know about any changes an obfuscator does to an assembly. The way PostSharp does this is by adding another layer of indirection. When PostSharp obfuscation support is enabled, it includes an extra 'name table' resource in the assembly, consisting of a series of method & type names. When PostSharp needs to lookup a method using reflection, instead of encoding the method name directly, it looks up the method name at a fixed offset inside that name table: MethodBase genericMethod = typeof(ContainingClass).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: get_Prop1 21: set_Prop1 22: DoFoo 23: GetWibble When the assembly is later processed by an obfuscator, the obfuscator can replace all the method and type names within the name table with their new name. That way, the reflection lookups performed by PostSharp will now use the new names, and everything will work as expected: MethodBase genericMethod = typeof(#kGy).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: #kkA 21: #zAb 22: #EF5a 23: #2tg As you can see, this requires direct support by an obfuscator in order to perform these rewrites. Dotfuscator supports it, and now, starting with SmartAssembly 6.6.4, SmartAssembly does too. So, a relatively simple solution to a tricky problem, with some CLR bugs thrown in for good measure. You don't see those every day! Cross posted from Simple Talk.

  Read the article

• Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

  - by Tanu Sood

  Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers:   Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

  Read the article

• Augmenting your Social Efforts via Data as a Service (DaaS)

  - by Mike Stiles

  The following is the 3rd in a series of posts on the value of leveraging social data across your enterprise by Oracle VP Product Development Don Springer and Oracle Cloud Data and Insight Service Sr. Director Product Management Niraj Deo. In this post, we will discuss the approach and value of integrating additional “public” data via a cloud-based Data-as-as-Service platform (or DaaS) to augment your Socially Enabled Big Data Analytics and CX Management. Let’s assume you have a functional Social-CRM platform in place. You are now successfully and continuously listening and learning from your customers and key constituents in Social Media, you are identifying relevant posts and following up with direct engagement where warranted (both 1:1, 1:community, 1:all), and you are starting to integrate signals for communication into your appropriate Customer Experience (CX) Management systems as well as insights for analysis in your business intelligence application. What is the next step? Augmenting Social Data with other Public Data for More Advanced Analytics When we say advanced analytics, we are talking about understanding causality and correlation from a wide variety, volume and velocity of data to Key Performance Indicators (KPI) to achieve and optimize business value. And in some cases, to predict future performance to make appropriate course corrections and change the outcome to your advantage while you can. The data to acquire, process and analyze this is very nuanced: It can vary across structured, semi-structured, and unstructured data It can span across content, profile, and communities of profiles data It is increasingly public, curated and user generated The key is not just getting the data, but making it value-added data and using it to help discover the insights to connect to and improve your KPIs. As we spend time working with our larger customers on advanced analytics, we have seen a need arise for more business applications to have the ability to ingest and use “quality” curated, social, transactional reference data and corresponding insights. The challenge for the enterprise has been getting this data inline into an easily accessible system and providing the contextual integration of the underlying data enriched with insights to be exported into the enterprise’s business applications. The following diagram shows the requirements for this next generation data and insights service or (DaaS): Some quick points on these requirements: Public Data, which in this context is about Common Business Entities, such as - Customers, Suppliers, Partners, Competitors (all are organizations) Contacts, Consumers, Employees (all are people) Products, Brands This data can be broadly categorized incrementally as - Base Utility data (address, industry classification) Public Master Reference data (trade style, hierarchy) Social/Web data (News, Feeds, Graph) Transactional Data generated by enterprise process, workflows etc. This Data has traits of high-volume, variety, velocity etc., and the technology needed to efficiently integrate this data for your needs includes - Change management of Public Reference Data across all categories Applied Big Data to extract statics as well as real-time insights Knowledge Diagnostics and Data Mining As you consider how to deploy this solution, many of our customers will be using an online “cloud” service that provides quality data and insights uniformly to all their necessary applications. In addition, they are requesting a service that is: Agile and Easy to Use: Applications integrated with the service can obtain data on-demand, quickly and simply Cost-effective: Pre-integrated into applications so customers don’t have to Has High Data Quality: Single point access to reference data for data quality and linkages to transactional, curated and social data Supports Data Governance: Becomes more manageable and cost-effective since control of data privacy and compliance can be enforced in a centralized place Data-as-a-Service (DaaS) Just as the cloud has transformed and now offers a better path for how an enterprise manages its IT from their infrastructure, platform, and software (IaaS, PaaS, and SaaS), the next step is data (DaaS). Over the last 3 years, we have seen the market begin to offer a cloud-based data service and gain initial traction. On one side of the DaaS continuum, we see an “appliance” type of service that provides a single, reliable source of accurate business data plus social information about accounts, leads, contacts, etc. On the other side of the continuum we see more of an online market “exchange” approach where ISVs and Data Publishers can publish and sell premium datasets within the exchange, with the exchange providing a rich set of web interfaces to improve the ease of data integration. Why the difference? It depends on the provider’s philosophy on how fast the rate of commoditization of certain data types will occur. How do you decide the best approach? Our perspective, as shown in the diagram below, is that the enterprise should develop an elastic schema to support multi-domain applicability. This allows the enterprise to take the most flexible approach to harness the speed and breadth of public data to achieve value. The key tenet of the proposed approach is that an enterprise carefully federates common utility, master reference data end points, mobility considerations and content processing, so that they are pervasively available. One way you may already be familiar with this approach is in how you do Address Verification treatments for accounts, contacts etc. If you design and revise this service in such a way that it is also easily available to social analytic needs, you could extend this to launch geo-location based social use cases (marketing, sales etc.). Our fundamental belief is that value-added data achieved through enrichment with specialized algorithms, as well as applying business “know-how” to weight-factor KPIs based on innovative combinations across an ever-increasing variety, volume and velocity of data, will be where real value is achieved. Essentially, Data-as-a-Service becomes a single entry point for the ever-increasing richness and volume of public data, with enrichment and combined capabilities to extract and integrate the right data from the right sources with the right factoring at the right time for faster decision-making and action within your core business applications. As more data becomes available (and in many cases commoditized), this value-added data processing approach will provide you with ongoing competitive advantage. Let’s look at a quick example of creating a master reference relationship that could be used as an input for a variety of your already existing business applications. In phase 1, a simple master relationship is achieved between a company (e.g. General Motors) and a variety of car brands’ social insights. The reference data allows for easy sort, export and integration into a set of CRM use cases for analytics, sales and marketing CRM. In phase 2, as you create more data relationships (e.g. competitors, contacts, other brands) to have broader and deeper references (social profiles, social meta-data) for more use cases across CRM, HCM, SRM, etc. This is just the tip of the iceberg, as the amount of master reference relationships is constrained only by your imagination and the availability of quality curated data you have to work with. DaaS is just now emerging onto the marketplace as the next step in cloud transformation. For some of you, this may be the first you have heard about it. Let us know if you have questions, or perspectives. In the meantime, we will continue to share insights as we can.Photo: Erik Araujo, stock.xchng

  Read the article

• BI Applications overview

  - by sv744

  Welcome to Oracle BI applications blog! This blog will talk about various features, general roadmap, description of functionality and implementation steps related to Oracle BI applications. In the first post we start with an overview of the BI apps and will delve deeper into some of the topics below in the upcoming weeks and months. If there are other topics you would like us to talk about, pl feel free to provide feedback on that. The Oracle BI applications are a set of pre-built applications that enable pervasive BI by providing role-based insight for each functional area, including sales, service, marketing, contact center, finance, supplier/supply chain, HR/workforce, and executive management. For example, Sales Analytics includes role-based applications for sales executives, sales management, as well as front-line sales reps, each of whom have different needs. The applications integrate and transform data from a range of enterprise sources—including Siebel, Oracle, PeopleSoft, SAP, and others—into actionable intelligence for each business function and user role. This blog  starts with the key benefits and characteristics of Oracle BI applications. In a series of subsequent blogs, each of these points will be explained in detail. Why BI apps? Demonstrate the value of BI to a business user, show reports / dashboards / model that can answer their business questions as part of the sales cycle. Demonstrate technical feasibility of BI project and significantly lower risk and improve success Build Vs Buy benefit Don’t have to start with a blank sheet of paper. Help consolidate disparate systems Data integration in M&A situations Insulate BI consumers from changes in the OLTP Present OLTP data and highlight issues of poor data / missing data – and improve data quality and accuracy Prebuilt Integrations BI apps support prebuilt integrations against leading ERP sources: Fusion Applications, E- Business Suite, Peoplesoft, JD Edwards, Siebel, SAP Co-developed with inputs from functional experts in BI and Applications teams. Out of the box dimensional model to source model mappings Multi source and Multi Instance support Rich Data Model    BI apps have a very rich dimensionsal data model built over 10 years that incorporates best practises from BI modeling perspective as well as reflect the source system complexities  Thanks for reading a long post, and be on the lookout for future posts.  We will look forward to your valuable feedback on these topics as well as suggestions on what other topics would you like us to cover. I Conformed dimensional model across all business subject areas allows cross functional reporting, e.g. customer / supplier 360 Over 360 fact tables across 7 product areas CRM – 145, SCM – 47, Financials – 28, Procurement – 20, HCM – 27, Projects – 18, Campus Solutions – 21, PLM - 56 Supported by 300 physical dimensions Support for extensive calendars; Gregorian, enterprise and ledger based Conformed data model and metrics for real time vs warehouse based reporting  Multi-tenant enabled Extensive BI related transformations BI apps ETL and data integration support various transformations required for dimensional models and reporting requirements. All these have been distilled into common patterns and abstracted logic which can be readily reused across different modules Slowly Changing Dimension support Hierarchy flattening support Row / Column Hybrid Hierarchy Flattening As Is vs. As Was hierarchy support Currency Conversion :-  Support for 3 corporate, CRM, ledger and transaction currencies UOM conversion Internationalization / Localization Dynamic Data translations Code standardization (Domains) Historical Snapshots Cycle and process lifecycle computations Balance Facts Equalization of GL accounting chartfields/segments Standardized values for categorizing GL accounts Reconciliation between GL and subledgers to track accounted/transferred/posted transactions to GL Materialization of data only available through costly and complex APIs e.g. Fusion Payroll, EBS / Fusion Accruals Complex event Interpretation of source data – E.g. o    What constitutes a transfer o    Deriving supervisors via position hierarchy o    Deriving primary assignment in PSFT o    Categorizing and transposition to measures of Payroll Balances to specific metrics to support side by side comparison of measures of for example Fixed Salary, Variable Salary, Tax, Bonus, Overtime Payments. o    Counting of Events – E.g. converting events to fact counters so that for example the number of hires can easily be added up and compared alongside the total transfers and terminations. Multi pass processing of multiple sources e.g. headcount, salary, promotion, performance to allow side to side comparison. Adding value to data to aid analysis through banding, additional domain classifications and groupings to allow higher level analytical reporting and data discovery Calculation of complex measures examples: o    COGs, DSO, DPO, Inventory turns  etc o    Transfers within a Hierarchy or out of / into a hierarchy relative to view point in hierarchy. Configurability and Extensibility support  BI apps offer support for extensibility for various entities as automated extensibility or part of extension methodology Key Flex fields and Descriptive Flex support  Extensible attribute support (JDE)  Conformed Domains ETL Architecture BI apps offer a modular adapter architecture which allows support of multiple product lines into a single conformed model Multi Source Multi Technology Orchestration – creates load plan taking into account task dependencies and customers deployment to generate a plan based on a customers of multiple complex etl tasks Plan optimization allowing parallel ETL tasks Oracle: Bit map indexes and partition management High availability support    Follow the sun support. TCO BI apps support several utilities / capabilities that help with overall total cost of ownership and ensure a rapid implementation Improved cost of ownership – lower cost to deploy On-going support for new versions of the source application Task based setups flows Data Lineage Functional setup performed in Web UI by Functional person Configuration Test to Production support Security BI apps support both data and object security enabling implementations to quickly configure the application as per the reporting security needs Fine grain object security at report / dashboard and presentation catalog level Data Security integration with source systems  Extensible to support external data security rules Extensive Set of KPIs Over 7000 base and derived metrics across all modules Time series calculations (YoY, % growth etc) Common Currency and UOM reporting Cross subject area KPIs (analyzing HR vs GL data, drill from GL to AP/AR, etc) Prebuilt reports and dashboards 3000+ prebuilt reports supporting a large number of industries Hundreds of role based dashboards Dynamic currency conversion at dashboard level Highly tuned Performance The BI apps have been tuned over the years for both a very performant ETL and dashboard performance. The applications use best practises and advanced database features to enable the best possible performance. Optimized data model for BI and analytic queries Prebuilt aggregates& the ability for customers to create their own aggregates easily on warehouse facts allows for scalable end user performance Incremental extracts and loads Incremental Aggregate build Automatic table index and statistics management Parallel ETL loads Source system deletes handling Low latency extract with Golden Gate Micro ETL support Bitmap Indexes Partitioning support Modularized deployment, start small and add other subject areas seamlessly Source Specfic Staging and Real Time Schema Support for source specific operational reporting schema for EBS, PSFT, Siebel and JDE Application Integrations The BI apps also allow for integration with source systems as well as other applications that provide value add through BI and enable BI consumption during operational decision making Embedded dashboards for Fusion, EBS and Siebel applications Action Link support Marketing Segmentation Sales Predictor Dashboard Territory Management External Integrations The BI apps data integration choices include support for loading extenral data External data enrichment choices : UNSPSC, Item class etc. Extensible Spend Classification Broad Deployment Choices Exalytics support Databases :  Oracle, Exadata, Teradata, DB2, MSSQL ETL tool of choice : ODI (coming), Informatica Extensible and Customizable Extensible architecture and Methodology to add custom and external content Upgradable across releases

  Read the article

• CodePlex Daily Summary for Friday, September 28, 2012

  CodePlex Daily Summary for Friday, September 28, 2012Popular ReleasesWPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.TFS Timesheets: TFS Timesheets 2.0: New features: Visual Studio 2012 support Bug fixes: Scaling mode inherited rather than font scalingCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Office File Properties: Office File Properties 3.3.1: Bug fix. Convert file extension to lowercase before checking.LoBDb.NET: LoBDb.NET 1.0.9: Centido.Core library: 1) SQL Server script bug fix: an error when changing the MaxLength property of an indexed string column or when changing the Precision-Scale properties of a decimal column. LobDb.NET Manager: 1) Changing the Precision, Scale, Default Value, Minimum and Maximum properties of a decimal column now enables the Save button. 2) The MaxLength property of a string column and the Precision+Scale values of a decimal column are now displayed in the column list. 3) Changing the Min...Chaos games: Chaos games: Small app for generating fractals using chaos gamesVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.SSIS GoogleAnalyticsSource: Version 1.1 Alpha 2: The component uses now the Google API V2.4 including the management API.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New ProjectsChaos games: Small app to generating fractals using chaos gamesDocument Digitalization System: This system will allow the users with on one or more PCs to digitalize pdf files and store it or export it to other file formats.ExternalTokenAnalysisOffline: SPUser?UserToken????????????????。FinalProjectSeniorProject: ***Unfinished*** Senior project build GL Ponpes Selamat Kendal: Aplikasi Akuntansi Sekolah Pondok Pesantren Modern Selamat KendalHealth Care Manager: One of keynote planned for the Brazzaville Microsoft event coming soon.Orchard Commerce History with PayPal: Project expands on Nwazet.Commerce module (and is required for this module to work). Adds a purchase history, product role associations, and PayPal.PDF.NET: PWMIS ?????? Ver 4.5 ???? SMS Egypt: This project is intended to make it easy for people to send SMS to their customers using SMS gateways inside and outside Egypt. Strong Caml: Use the familiar CAML syntax, but now do it in strongly-typed, dynamic code. Just follow Visual Studio's IntelliSense, and your CAML query can't go wrong!TrainingFrameWork: TrainingFrameWork

  Read the article

• Partner Blog Series: PwC Perspectives - Looking at R2 for Customer Organizations

  - by Tanu Sood

  Welcome to the first of our partner blog series. November Mondays are all about PricewaterhouseCoopers' perespective on Identity and R2. In this series, we have identity management experts from PricewaterhouseCoopers (PwC) share their perspective on (and experiences with) the recent identity management release, Oracle Identity Management R2. The purpose of the series is to discuss real world identity use cases that helped shape the innovations in the recent R2 release and the implementation strategies that customers are employing today with expertise from PwC. Part 1: Looking at R2 for Customer Organizations In this inaugural post, we will discuss some of the new features of the R2 release of Oracle Identity Manager that some of our customer organizations are implementing today and the business rationale for those. Oracle's R2 Security portfolio represents a solid step forward for a platform that is already market-leading.  Prior to R2, Oracle was an industry titan in security with reliable products, expansive compatibility, and a large customer base.  Oracle has taken their identity platform to the next level in their latest version, R2.  The new features include a customizable UI, a request catalog, flexible security, and enhancements for its connectors, and more. Oracle customers will be impressed by the new Oracle Identity Manager (OIM) business-friendly UI.  Without question, Oracle has invested significant time in responding to customer feedback about making access requests and related activities easier for non-IT users.  The flexibility to add information to screens, hide fields that are not important to a particular customer, and adjust web themes to suit a company's preference make Oracle's Identity Manager stand out among its peers.  Customers can also expect to carry UI configurations forward with minimal migration effort to future versions of OIM.  Oracle's flexible UI will benefit many organizations looking for a customized feel with out-of-the-box configurations. Organizations looking to extend their services to end users will benefit significantly from new usability features like OIM’s ‘Catalog.’  Customers familiar with Oracle Identity Analytics' 'Glossary' feature will be able to relate to the concept.  It will enable Roles, Entitlements, Accounts, and Resources to be requested through the out-of-the-box UI.  This is an industry-changing feature as customers can make the process to request access easier than ever.  For additional ease of use, Oracle has introduced a shopping cart style request interface that further simplifies the experience for end users.  Common requests can be setup as profiles to save time.  All of this is combined with the approval workflow engine introduced in R1 that provides the flexibility customers need to meet their compliance requirements. Enhanced security was also on the list of features Oracle wanted to deliver to its customers.  The new end-user UI provides additional granular access controls.  Common Help Desk use cases can be implemented with ease by updating the application profiles.  Access can be rolled out so that administrators can only manage a certain department or organization.  Further, OIM can be more easily configured to select which fields can be read-only vs. updated.  Finally, this security model can be used to limit search results for roles and entitlements intended for a particular department.  Every customer has a different need for access and OIM now matches this need with a flexible security model. One of the important considerations when selecting an Identity Management platform is compatibility.  The number of supported platform connectors and how well it can integrate with non-supported platforms is a key consideration for selecting an identity suite.  Oracle has a long list of supported connectors.  When a customer has a requirement for a platform not on that list, Oracle has a solution too.  Oracle is introducing a simplified architecture called Identity Connector Framework (ICF), which holds the potential to simplify custom connectors.  Finally, Oracle has introduced a simplified process to profile new disconnected applications from the web browser.  This is a useful feature that enables administrators to profile applications quickly as well as empowering the application owner to fulfill requests from their web browser.  Support will still be available for connectors based on previous versions in R2. Oracle Identity Manager's new R2 version has delivered many new features customers have been asking for.  Oracle has matured their platform with R2, making it a truly distinctive platform among its peers. In our next post, expect a deep dive into use cases for a customer considering R2 as their new Enterprise identity solution. In the meantime, we look forward to hearing from you about the specific challenges you are facing and your experience in solving those. Meet the Writers Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years. Praveen Krishna is a Manager in the Advisory  Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving.

  Read the article

• SOA Suite Integration: Part 3: Loading files

  - by Anthony Shorten

  One of the most common scenarios in SOA Integration is the loading of a file into the product from an external source. In Oracle SOA Suite there is a File Adapter that can process many file types into your BPEL process. For this example I will use the File Adapter to load a file of user and emails to update the user object within the Oracle Utilities Application Framework. Remember you can repeat this process with other objects and other file types. Again I am illustrating the ease of integration. The first thing is to create an empty BPEL process that will hold our flow. In Oracle JDeveloper this can be achieved by specifying the Define Service Later template (as other templates have predefined inputs and outputs and in this case we want to specify those). So I will create simpleFileLoad process to house our process. You will start with an empty canvas so you need to first specify the load part of the process using the File Adapter. Select the File Adapter from the Component Palette under BPEL Services and drag and drop it to the left side Partner Links (left is input). You name the Service. In this case I chose LoadFile. Press Next. We will define the interface as part of the wizard so select Define from operation and schema (specified later). Press Next. We are going to choose Read File to denote that we will read the file and specify the default Operation Name as Read. Press Next. The next step is to tell the Adapter the location of the files, how to process them and what to do with them after they have been processed. I am using hardcoded locations in this example but you can have logical locations as well. Press Next. I am now going to tell the adapter how to recognize the files I want to load. In my case I am using CSV files and more importantly I am tell the adapter to run the process for each record in the file it encounters. Press Next. Now, I tell the adapter how often I want to poll for the files. I have taken the defaults. Press Next. At this stage I have no explanation of the format of the input. So I am going to invoke the Native Format Wizard which will guide me through the process of creating the file input format. Clicking the purple cog icon will start the wizard. After an introduction screen (not shown), you specify the format of the input file. The File Adapter supports multiple format types. For this example, I will use Delimited as I am going to load a CSV file. Press Next. The best way for the wizard to work is with a sample. I have a sample file and the wizard will ask how much of the file to use as a template. I will use the defaults. Note: If you are using a language that has other languages other than US-ASCII, it is at this point you specify the character set to use.  Press Next. The sample contains multiple instances of a single record type. The wizard supports complex types as well. We will use the appropriate setting for our file. Press Next. You have to specify the file element and the record element. This will be used by the input wizard to translate the CSV data into an XML structure (this will make sense later). I am using LoadUsers as my file delimiter (root element) and User Record as my record root element. Press Next. As the file is CSV the delimiter is "," so I will also specify that the End Of Line (EOL) indicator indicates the end of a record. Press Next. Up until this point your have not given the columns their names. In my case my sample includes the column names in the first record. This is not always the case but you can specify the names and formats of columns in this dialog (not shown). Press Next. The wizard now generates the schema for the input file. You can specify a name for the schema. I have used userupdate.xsd. We want to verify the schema so press Test. You can test the schema by specifying an input sample. and pressing the green play button. You will see the delimiters you specified earlier for the file and the records. Press Ok to continue. A confirmation screen will be displayed showing you the location of the schema in your project. Press Finish to return to the File Adapter configuration. You will now see the schema and elements prepopulated from the wizard. Press Next. The File Adapter configuration is now complete. Press Finish. Now you need to receive the input from the LoadFile component so we need to place a Receive node in the BPEL process by drag and dropping the Receive component from the Component Palette under BPEL Constructs onto the BPEL process. We link the receive process with the LoadFile component by dragging the left most connect node of the Receive node to the LoadFile component. Once the link is established you need to name the Receive node appropriately and as in the post of the last part of this series you need to generate input variables for the BPEL process to hold the input records in. You need to now add the product Web Service. The process is the same as described in the post of the last part of this series. You drop the Web Service BPEL Service onto the right side of the process and fill in the details of the WSDL URL . You also have to add an Invoke node to call the service and generate the input and outputs variables for the call in the Invoke node. Now, to get the inputs from File to the service. You have to use a Transform (you can use an Assign action but a Transform action is more flexible). You drag and drop the Transform component from the Component Palette under Oracle Extensions and place it between the Receive and Invoke nodes. We name the Transform Node, Mapper File and associate the source of the mapping the schema from the Receive node and the output will be the input variable from the Invoke node. We now build the transform. We first map the user and email attributes by drag and drop the elements from the left to the right. The reason we needed to use the transform is that we will be telling the AS-User service that we want to issue an update action. Remember when we registered the service we actually used Read as the default. If we do not otherwise inform the service to use the Update action it will use the Read action instead (which is not desired). To specify the update action you need to click on the transactionType node on the right and select Set Text to set the action. You need to specify the transactionType of UPD (for update). The mapping is now complete. The final BPEL process is ready for deployment. You then deploy the BPEL process to the server and to test the service by simply dropping a file, in the same pattern/name as you specified, in the directory you specified in the File Adapter. You will see each record as a separate instance entry in the Fusion Middleware Control console. You can now load files into the product. You can repeat this process for each type of file to process. While this was a simple example it illustrates the method of loading data can be achieved using SOA Suite in conjunction with our products.

  Read the article

• HTG Explains: Should You Buy Extended Warranties?

  - by Chris Hoffman

  Buy something at an electronics store and you’ll be confronted by a pushy salesperson who insists you need an extended warranty. You’ll also see extended warranties pushed hard when shopping online. But are they worth it? There’s a reason stores push extended warranties so hard. They’re almost always pure profit for the store involved. An electronics store may live on razor-thin product margins and make big profits on extended warranties and overpriced HDMI cables. You’re Already Getting Multiple Warranties First, back up. The product you’re buying already includes a warranty. In fact, you’re probably getting several different types of warranties. Store Return and Exchange: Most electronics stores allow you to return a malfunctioning product within the first 15 or 30 days and they’ll provide you with a new one. The exact period of time will vary from store to store. If you walk out of the store with a defective product and have to swap it for a new one within the first few weeks, this should be easy. Manufacturer Warranty: A device’s manufacturer — whether the device is a laptop, a television, or a graphics card — offers their own warranty period. The manufacturer warranty covers you after the store refuses to take the product back and exchange it. The length of this warranty depends on the type of product. For example, a cheap laptop may only offer a one-year manufacturer warranty, while a more expensive laptop may offer a two-year warranty. Credit Card Warranty Extension: Many credit cards offer free extended warranties on products you buy with that credit card. Credit card companies will often give you an additional year of warranty. For example, if you buy a laptop with a two year warranty and it fails in the third year, you could then contact your credit card company and they’d cover the cost of fixing or replacing it. Check your credit card’s benefits and fine print for more information. Why Extended Warranties Are Bad You’re already getting a fairly long warranty period, especially if you have a credit card that offers you a free extended warranty — these are fairly common. If the product you get is a “lemon” and has a manufacturing error, it will likely fail pretty soon — well within your warranty period. The extended warranty matters after all your other warranties are exhausted. In the case of a laptop with a two-year warranty that you purchase with a credit card giving you a one-year warranty extension, your extended warranty will kick in three years after you purchase the laptop. In that many years, your current laptop will likely feel pretty old and laptops that are as good — or better — will likely be pretty cheap. If it’s a television, better television displays will be available at a lower price point. You’ll either want to upgrade to a newer model or you’ll be able to buy a new, just-as-good product for very cheap. You’ll only have to pay out-of-pocket if your device fails after the normal warranty period — in over two or three years for typical laptops purchased with a decent credit card. Save the money you would have spent on the warranty and put it towards a future upgrade. How Much Do Extended Warranties Cost? Let’s look at an example from a typical pushy retail outlet, Best Buy. We went to Best Buy’s website and found a pretty standard $600 Samsung laptop. This laptop comes with a one-year warranty period. If purchased with a fairly common credit card, you can easily get a two-year warranty period on this laptop without spending an additional penny. (Yes, such credit cards are available with no yearly fees.) During the check-out process, Best Buy tries to sell you a Geek Squad “Accidental Protection Plan.” To get an additional year of Best Buy’s extended warranty, you’d have to pay $324.98 for a “3-Year Accidental Protection Plan”. You’d basically be paying more than half the price of your laptop for an additional year of warranty — remember, the standard warranties would cover you anyway for the first two years. If this laptop did break sometime between two and three years from now, we wouldn’t be surprised if you could purchase a comparable laptop for about $325 anyway. And, if you don’t need to replace it, you’ve saved that money. Best Buy would object that this isn’t a standard extended warranty. It’s a supercharged warranty plan that will also provide coverage if you spill something on your laptop or drop it and break it. You just have to ask yourself a question. What are the odds that you’ll drop your laptop or spill something on it? They’re probably pretty low if you’re a typical human being. Is it worth spending more than half the price of the laptop just in case you’ll make an uncommon mistake? Probably not. There may be occasional exceptions to this — some Apple users swear by Apple’s AppleCare, for example — but you should generally avoid buying these things. There’s a reason stores are so pushy about extended warranties, and it’s not because they want to help protect you. It’s because they’re making lots of profit from these plans, and they’re making so much profit because they’re not a good deal for customers. Image Credit: Philip Taylor on Flickr     

  Read the article

• Introduction to Human Workflow 11g

  - by agiovannetti

  Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

  Read the article

• Oracle B2B - Synchronous Request Reply

  - by cdwright

  Introduction So first off, let me say I didn't create this demo (although I did modify it some). I got it from a member of the B2B development technical staff. Since it came with only a simple readme file, I thought I would take some time and write a more detailed explanation about how it works. Beginning with Oracle SOA Suite PS5 (11.1.1.6), B2B supports synchronous request reply over http using the b2b/syncreceiver servlet. I’m attaching the demo to this blog which includes a SOA composite archive that needs to be deployed using JDeveloper, a B2B repository with two agreements that need to be deployed using the B2B console, and a test xml file that gets sent to the b2b/syncreceiver servlet using your favorite SOAP test tool (I'm using Firefox Poster here). You can download the zip file containing the demo here. The demo works by sending the sample xml request file (req.xml) to http://<b2bhost>:8001/b2b/syncreceiver using the SOAP test tool.  The syncreceiver servlet keeps the socket connection open between itself and the test tool so that it can synchronously send the reply message back. When B2B receives the inbound request message, it is passed to the SOA composite through the default B2B Fabric binding. A simple reply is created in BPEL and returned to B2B which then sends the message back to the test tool using that same socket connection. I’ll show you the B2B configuration first, then we’ll look at the soa composite. Configuring B2B No additional configuration necessary in order to use the syncreceiver servlet. It is already running when you start SOA. After importing the GC_SyncReqRep.zip repository file into B2B, you’ll have the typical GlobalChips host trading partner and the Acme remote trading partner. Document Management The repository contains two very simple custom XML document definitions called Orders and OrdersResponse. In order to determine the trading partner agreement needed to process the inbound Orders document, you need to know two things about it; what is it and where it came from. So let’s look at how B2B identifies the appropriate document definition for the message. The XSD’s for these two document definitions themselves are not particularly interesting. Whenever you're dealing with custom XML documents, B2B identifies the appropriate document definition for each XML message using an XPath Identification Expression. The expression is entered for each of these document definitions under the document administration tab in the B2B console. The full XPATH expression for the Orders document is  //*[local-name()='shiporder']/*[local-name()='shipto']/*[local-name()='name']/text(). You can see this path in the XSD diagram below and how it uniquely identifies this message. The OrdersReponse document is identified in the same way. The XPath expression for it is //*[local-name()='Response']/*[local-name()='Status']/text(). You can see how it’s path differs uniquely identifying the reply from the request. Trading Partner Profile The trading partner profiles are very simple too. For GlobalChips, a generic identifier is being used to identify the sender of the response document using the host trading partner name. For Acme, a generic identifier is also being used to identify the sender of the inbound request using the remote trading partner name. The document types are added for the remote trading partner as usual. So the remote trading partner Acme is the sender of the Orders document, and it is the receiver of the OrdersResponse document. For the remote trading partner only, there needs to be a dummy channel which gets used in the outbound response agreement. The channel is not actually used. It is just a necessary place holder that needs to be there when creating the agreement. Trading Partner Agreement The agreements are equally simple. There is no validation and translation is not an option for a custom XML document type. For the InboundAgreement (request) the document definition is set to OrdersDef. In the Agreement Parameters section the generic identifiers have been added for the host and remote trading partners. That’s all that is needed for the inbound transaction. For the OutboundAgreement (response), the document definition is set to OrdersResponseDef and the generic identifiers for the two trading partners are added. The remote trading partner dummy delivery channel is also added to the agreement. SOA Composite Import the SOA composite archive into JDeveloper as an EJB JAR file. Open the composite and you should have a project that looks like this. In the composite, open the b2bInboundSyncSvc exposed service and advance through the setup wizard. Select your Application Server Connection and advance to the Operations window. Notice here that the B2B binding is set to Receive. It is not set for Synchronous Request Reply. Continue advancing through the wizard as you normally would and select finish at the end. Now open BPELProcess1 in the composite. The BPEL process is set as a Synchronous Request Reply as you can see below. The while loop is there just to give the process something to do. The actual reply message is prepared in the assignResponseValues assignment followed by an Invoke of the B2B binding. Open the replyResponse Invoke and go to the properties tab. You’ll see that the fromTradingPartnerId, toTradingPartner, documentTypeName, and documentProtocolRevision properties have been set. Testing the Configuration To test the configuration, I used Firefox Poster. Enter the URL for the b2b/syncreceiver servlet and browse for the req.xml file that contains the test request message. In the Headers tab, add the property ‘from’ and give it the value ‘Acme’. This is how B2B will know where the message is coming from and it will use that information along with the document type name to find the right trading partner agreement. Now post the message. You should get back a response with a status of ‘200 OK’. That’s all there is to it.

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 4

  - by MarkPearl

  Learning Outcomes Explain the characteristics of memory systems Describe the memory hierarchy Discuss cache memory principles Discuss issues relevant to cache design Describe the cache organization of the Pentium Computer Memory Systems There are key characteristics of memory… Location – internal or external Capacity – expressed in terms of bytes Unit of Transfer – the number of bits read out of or written into memory at a time Access Method – sequential, direct, random or associative From a users perspective the two most important characteristics of memory are… Capacity Performance – access time, memory cycle time, transfer rate The trade off for memory happens along three axis… Faster access time, greater cost per bit Greater capacity, smaller cost per bit Greater capacity, slower access time This leads to people using a tiered approach in their use of memory   As one goes down the hierarchy, the following occurs… Decreasing cost per bit Increasing capacity Increasing access time Decreasing frequency of access of the memory by the processor The use of two levels of memory to reduce average access time works in principle, but only if conditions 1 to 4 apply. A variety of technologies exist that allow us to accomplish this. Thus it is possible to organize data across the hierarchy such that the percentage of accesses to each successively lower level is substantially less than that of the level above. A portion of main memory can be used as a buffer to hold data temporarily that is to be read out to disk. This is sometimes referred to as a disk cache and improves performance in two ways… Disk writes are clustered. Instead of many small transfers of data, we have a few large transfers of data. This improves disk performance and minimizes processor involvement. Some data designed for write-out may be referenced by a program before the next dump to disk. In that case the data is retrieved rapidly from the software cache rather than slowly from disk. Cache Memory Principles Cache memory is substantially faster than main memory. A caching system works as follows.. When a processor attempts to read a word of memory, a check is made to see if this in in cache memory… If it is, the data is supplied, If it is not in the cache, a block of main memory, consisting of a fixed number of words is loaded to the cache. Because of the phenomenon of locality of references, when a block of data is fetched into the cache, it is likely that there will be future references to that same memory location or to other words in the block. Elements of Cache Design While there are a large number of cache implementations, there are a few basic design elements that serve to classify and differentiate cache architectures… Cache Addresses Cache Size Mapping Function Replacement Algorithm Write Policy Line Size Number of Caches Cache Addresses Almost all non-embedded processors support virtual memory. Virtual memory in essence allows a program to address memory from a logical point of view without needing to worry about the amount of physical memory available. When virtual addresses are used the designer may choose to place the cache between the MMU (memory management unit) and the processor or between the MMU and main memory. The disadvantage of virtual memory is that most virtual memory systems supply each application with the same virtual memory address space (each application sees virtual memory starting at memory address 0), which means the cache memory must be completely flushed with each application context switch or extra bits must be added to each line of the cache to identify which virtual address space the address refers to. Cache Size We would like the size of the cache to be small enough so that the overall average cost per bit is close to that of main memory alone and large enough so that the overall average access time is close to that of the cache alone. Also, larger caches are slightly slower than smaller ones. Mapping Function Because there are fewer cache lines than main memory blocks, an algorithm is needed for mapping main memory blocks into cache lines. The choice of mapping function dictates how the cache is organized. Three techniques can be used… Direct – simplest technique, maps each block of main memory into only one possible cache line Associative – Each main memory block to be loaded into any line of the cache Set Associative – exhibits the strengths of both the direct and associative approaches while reducing their disadvantages For detailed explanations of each approach – read the text book (page 148 – 154) Replacement Algorithm For associative and set associating mapping a replacement algorithm is needed to determine which of the existing blocks in the cache must be replaced by a new block. There are four common approaches… LRU (Least recently used) FIFO (First in first out) LFU (Least frequently used) Random selection Write Policy When a block resident in the cache is to be replaced, there are two cases to consider If no writes to that block have happened in the cache – discard it If a write has occurred, a process needs to be initiated where the changes in the cache are propagated back to the main memory. There are several approaches to achieve this including… Write Through – all writes to the cache are done to the main memory as well at the point of the change Write Back – when a block is replaced, all dirty bits are written back to main memory The problem is complicated when we have multiple caches, there are techniques to accommodate for this but I have not summarized them. Line Size When a block of data is retrieved and placed in the cache, not only the desired word but also some number of adjacent words are retrieved. As the block size increases from very small to larger sizes, the hit ratio will at first increase because of the principle of locality, which states that the data in the vicinity of a referenced word are likely to be referenced in the near future. As the block size increases, more useful data are brought into cache. The hit ratio will begin to decrease as the block becomes even bigger and the probability of using the newly fetched information becomes less than the probability of using the newly fetched information that has to be replaced. Two specific effects come into play… Larger blocks reduce the number of blocks that fit into a cache. Because each block fetch overwrites older cache contents, a small number of blocks results in data being overwritten shortly after they are fetched. As a block becomes larger, each additional word is farther from the requested word and therefore less likely to be needed in the near future. The relationship between block size and hit ratio is complex, and no set approach is judged to be the best in all circumstances.   Pentium 4 and ARM cache organizations The processor core consists of four major components: Fetch/decode unit – fetches program instruction in order from the L2 cache, decodes these into a series of micro-operations, and stores the results in the L2 instruction cache Out-of-order execution logic – Schedules execution of the micro-operations subject to data dependencies and resource availability – thus micro-operations may be scheduled for execution in a different order than they were fetched from the instruction stream. As time permits, this unit schedules speculative execution of micro-operations that may be required in the future Execution units – These units execute micro-operations, fetching the required data from the L1 data cache and temporarily storing results in registers Memory subsystem – This unit includes the L2 and L3 caches and the system bus, which is used to access main memory when the L1 and L2 caches have a cache miss and to access the system I/O resources

  Read the article

• Notes on implementing Visual Studio 2010 Navigate To

  - by cyberycon

  One of the many neat functions added to Visual Studio in VS 2010 was the Navigate To feature. You can find it by clicking Edit, Navigate To, or by using the keyboard shortcut Ctrl, (yes, that's control plus the comma key). This pops up the Navigate To dialog that looks like this: As you type, Navigate To starts searching through a number of different search providers for your term. The entries in the list change as you type, with most providers doing some kind of fuzzy or at least substring matching. If you have C#, C++ or Visual Basic projects in your solution, all symbols defined in those projects are searched. There's also a file search provider, which displays all matching filenames from projects in the current solution as well. And, if you have a Visual Studio package of your own, you can implement a provider too. Micro Focus (where I work) provide the Visual COBOL language inside Visual Studio (http://visualstudiogallery.msdn.microsoft.com/ef9bc810-c133-4581-9429-b01420a9ea40 ), and we wanted to provide this functionality too. This post provides some notes on the things I discovered mainly through trial and error, but also with some kind help from devs inside Microsoft. The expectation of Navigate To is that it searches across the whole solution, not just the current project. So in our case, we wanted to search for all COBOL symbols inside all of our Visual COBOL projects inside the solution. So first of all, here's the Microsoft documentation on Navigate To: http://msdn.microsoft.com/en-us/library/ee844862.aspx . It's the reference information on the Microsoft.VisualStudio.Language.NavigateTo.Interfaces Namespace, and it lists all the interfaces you will need to implement to create your own Navigate To provider. Navigate To uses Visual Studio's latest mechanism for integrating external functionality and services, Managed Extensibility Framework (MEF). MEF components don't require any registration with COM or any other registry entries to be found by Visual Studio. Visual Studio looks in several well-known locations for manifest files (extension.vsixmanifest). It then uses reflection to scan for MEF attributes on classes in the assembly to determine which functionality the assembly provides. MEF itself is actually part of the .NET framework, and you can learn more about it here: http://mef.codeplex.com/. To get started with Visual Studio and MEF you could do worse than look at some of the editor examples on the VSX page http://archive.msdn.microsoft.com/vsx . I've also written a small application to help with switching between development and production MEF assemblies, which you can find on Codeproject: http://www.codeproject.com/KB/miscctrl/MEF_Switch.aspx. The Navigate To interfaces Back to Navigate To, and summarizing the MSDN reference documentation, you need to implement the following interfaces: INavigateToItemProviderFactoryThis is Visual Studio's entry point to your Navigate To implementation, and you must decorate your implementation with the following MEF export attribute: [Export(typeof(INavigateToItemProviderFactory))]  INavigateToItemProvider Your INavigateToItemProviderFactory needs to return your implementation of INavigateToItemProvider. This class implements StartSearch() and StopSearch(). StartSearch() is the guts of your provider, and we'll come back to it in a minute. This object also needs to implement IDisposeable(). INavigateToItemDisplayFactory Your INavigateToItemProvider hands back NavigateToItems to the NavigateTo framework. But to give you good control over what appears in the NavigateTo dialog box, these items will be handed back to your INavigateToItemDisplayFactory, which must create objects implementing INavigateToItemDisplay  INavigateToItemDisplay Each of these objects represents one result in the Navigate To dialog box. As well as providing the description and name of the item, this object also has a NavigateTo() method that should be capable of displaying the item in an editor when invoked. Carrying out the search The lifecycle of your INavigateToItemProvider is the same as that of the Navigate To dialog. This dialog is modal, which makes your implementation a little easier because you know that the user can't be changing things in editors and the IDE while this dialog is up. But the Navigate To dialog DOES NOT run on the main UI thread of the IDE – so you need to be aware of that if you want to interact with editors or other parts of the IDE UI. When the user invokes the Navigate To dialog, your INavigateToItemProvider gets sent a TryCreateNavigateToItemProvider() message. Instantiate your INavigateToItemProvider and hand this back. The sequence diagram below shows what happens next. Your INavigateToItemProvider will get called with StartSearch(), and passed an INavigateToCallback. StartSearch() is an asynchronous request – you must return from this method as soon as possible, and conduct your search on a separate thread. For each match to the search term, instantiate a NavigateToItem object and send it to INavigateToCallback.AddItem(). But as the user types in the Search Terms field, NavigateTo will invoke your StartSearch() method repeatedly with the changing search term. When you receive the next StartSearch() message, you have to abandon your current search, and start a new one. You can't rely on receiving a StopSearch() message every time. Finally, when the Navigate To dialog box is closed by the user, you will get a Dispose() message – that's your cue to abandon any uncompleted searches, and dispose any resources you might be using as part of your search. While you conduct your search invoke INavigateToCallback.ReportProgress() occasionally to provide feedback about how close you are to completing the search. There does not appear to be any particular requirement to how often you invoke ReportProgress(), and you report your progress as the ratio of two integers. In my implementation I report progress in terms of the number of symbols I've searched over the total number of symbols in my dictionary, and send a progress report every 16 symbols. Displaying the Results The Navigate to framework invokes INavigateToItemDisplayProvider.CreateItemDisplay() once for each result you passed to the INavigateToCallback. CreateItemDisplay() is passed the NavigateToItem you handed to the callback, and must return an INavigateToItemDisplay object. NavigateToItem is a sealed class which has a few properties, including the name of the symbol. It also has a Tag property, of type object. This enables you to stash away all the information you will need to create your INavigateToItemDisplay, which must implement an INavigateTo() method to display a symbol in an editor IDE when the user double-clicks an entry in the Navigate To dialog box. Since the tag is of type object, it is up to you, the implementor, to decide what kind of object you store in here, and how it enables the retrieval of other information which is not included in the NavigateToItem properties. Some of the INavigateToItemDisplay properties are self-explanatory, but a couple of them are less obvious: Additional informationThe string you return here is displayed inside brackets on the same line as the Name property. In English locales, Visual Studio includes the preposition "of". If you look at the first line in the Navigate To screenshot at the top of this article, Book_WebRole.Default is the additional information for textBookAuthor, and is the namespace qualified type name the symbol appears in. For procedural COBOL code we display the Program Id as the additional information DescriptionItemsYou can use this property to return any textual description you want about the item currently selected. You return a collection of DescriptionItem objects, each of which has a category and description collection of DescriptionRun objects. A DescriptionRun enables you to specify some text, and optional formatting, so you have some control over the appearance of the displayed text. The DescriptionItems property is displayed at the bottom of the Navigate To dialog box, with the Categories on the left and the Descriptions on the right. The Visual COBOL implementation uses it to display more information about the location of an item, making it easier for the user to know disambiguate duplicate names (something there can be a lot of in large COBOL applications). Summary I hope this article is useful for anyone implementing Navigate To. It is a fantastic navigation feature that Microsoft have added to Visual Studio, but at the moment there still don't seem to be any examples on how to implement it, and the reference information on MSDN is a little brief for anyone attempting an implementation.

  Read the article

• SharePoint logging to a list

  - by Norgean

  I recently worked in an environment with several servers. Locating the correct SharePoint log file for error messages, or development trace calls, is cumbersome. And once the solution hit the cloud, it got even worse, as we had no access to the log files at all. Obviously we are not the only ones with this problem, and the current trend seems to be to log to a list. This had become an off-hour project, so rather than do the sensible thing and find a ready-made solution, I decided to do it the hard way. So! Fire up Visual Studio, create yet another empty SharePoint solution, and start to think of some requirements. Easy on/offI want to be able to turn list-logging on and off.Easy loggingFor me, this means being able to use string.Format.Easy filteringLet's have the possibility to add some filtering columns; category and severity, where severity can be "verbose", "warning" or "error". Easy on/off Well, that's easy. Create a new web feature. Add an event receiver, and create the list on activation of the feature. Tear the list down on de-activation. I chose not to create a new content type; I did not feel that it would give me anything extra. I based the list on the generic list - I think a better choice would have been the announcement type. Approximately: public void CreateLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListName);             if (list == null)             {                 var listGuid = web.Lists.Add(LogListName, "Logging for the masses", SPListTemplateType.GenericList);                 list = web.Lists[listGuid];                 list.Title = LogListTitle;                 list.Update();                 list.Fields.Add(Category, SPFieldType.Text, false);                 var stringColl = new StringCollection();                 stringColl.AddRange(new[]{Error, Information, Verbose});                 list.Fields.Add(Severity, SPFieldType.Choice, true, false, stringColl);                 ModifyDefaultView(list);             }         }Should be self explanatory, but: only create the list if it does not already exist (d'oh). Best practice: create it with a Url-friendly name, and, if necessary, give it a better title. ...because otherwise you'll have to look for a list with a name like "Simple_x0020_Log". I've added a couple of fields; a field for category, and a 'severity'. Both to make it easier to find relevant log messages. Notice that I don't have to call list.Update() after adding the fields - this would cause a nasty error (something along the lines of "List locked by another user"). The function for deleting the log is exactly as onerous as you'd expect:         public void DeleteLog(SPWeb web)         {             var list = web.Lists.TryGetList(LogListTitle);             if (list != null)             {                 list.Delete();             }         } So! "All" that remains is to log. Also known as adding items to a list. Lots of different methods with different signatures end up calling the same function. For example, LogVerbose(web, message) calls LogVerbose(web, null, message) which again calls another method which calls: private static void Log(SPWeb web, string category, string severity, string textformat, params object[] texts)         {             if (web != null)             {                 var list = web.Lists.TryGetList(LogListTitle);                 if (list != null)                 {                     var item = list.AddItem(); // NOTE! NOT list.Items.Add… just don't, mkay?                     var text = string.Format(textformat, texts);                     if (text.Length > 255) // because the title field only holds so many chars. Sigh.                         text = text.Substring(0, 254);                     item[SPBuiltInFieldId.Title] = text;                     item[Degree] = severity;                     item[Category] = category;                     item.Update();                 }             } // omitted: Also log to SharePoint log.         } By adding a params parameter I can call it as if I was doing a Console.WriteLine: LogVerbose(web, "demo", "{0} {1}{2}", "hello", "world", '!'); Ok, that was a silly example, a better one might be: LogError(web, LogCategory, "Exception caught when updating {0}. exception: {1}", listItem.Title, ex); For performance reasons I use list.AddItem rather than list.Items.Add. For completeness' sake, let us include the "ModifyDefaultView" function that I deliberately skipped earlier.         private void ModifyDefaultView(SPList list)         {             // Add fields to default view             var defaultView = list.DefaultView;             var exists = defaultView.ViewFields.Cast<string>().Any(field => String.CompareOrdinal(field, Severity) == 0);               if (!exists)             {                 var field = list.Fields.GetFieldByInternalName(Severity);                 if (field != null)                     defaultView.ViewFields.Add(field);                 field = list.Fields.GetFieldByInternalName(Category);                 if (field != null)                     defaultView.ViewFields.Add(field);                 defaultView.Update();                   var sortDoc = new XmlDocument();                 sortDoc.LoadXml(string.Format("<Query>{0}</Query>", defaultView.Query));                 var orderBy = (XmlElement) sortDoc.SelectSingleNode("//OrderBy");                 if (orderBy != null && sortDoc.DocumentElement != null)                     sortDoc.DocumentElement.RemoveChild(orderBy);                 orderBy = sortDoc.CreateElement("OrderBy");                 sortDoc.DocumentElement.AppendChild(orderBy);                 field = list.Fields[SPBuiltInFieldId.Modified];                 var fieldRef = sortDoc.CreateElement("FieldRef");                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                   fieldRef = sortDoc.CreateElement("FieldRef");                 field = list.Fields[SPBuiltInFieldId.ID];                 fieldRef.SetAttribute("Name", field.InternalName);                 fieldRef.SetAttribute("Ascending", "FALSE");                 orderBy.AppendChild(fieldRef);                 defaultView.Query = sortDoc.DocumentElement.InnerXml;                 //defaultView.Query = "<OrderBy><FieldRef Name='Modified' Ascending='FALSE' /><FieldRef Name='ID' Ascending='FALSE' /></OrderBy>";                 defaultView.Update();             }         } First two lines are easy - see if the default view includes the "Severity" column. If it does - quit; our job here is done.Adding "severity" and "Category" to the view is not exactly rocket science. But then? Then we build the sort order query. Through XML. The lines are numerous, but boring. All to achieve the CAML query which is commented out. The major benefit of using the dom to build XML, is that you may get compile time errors for spelling mistakes. I say 'may', because although the compiler will not let you forget to close a tag, it will cheerfully let you spell "Name" as "Naem". Whichever you prefer, at the end of the day the view will sort by modified date and ID, both descending. I added the ID as there may be several items with the same time stamp. So! Simple logging to a list, with sensible a view, and with normal functionality for creating your own filterings. I should probably have added some more views in code, ready filtered for "only errors", "errors and warnings" etc. And it would be nice to block verbose logging completely, but I'm not happy with the alternatives. (yetanotherfeature or an admin page seem like overkill - perhaps just removing it as one of the choices, and not log if it isn't there?) Before you comment - yes, try-catches have been removed for clarity. There is nothing worse than having a logging function that breaks your site!

  Read the article

• Right-Time Retail Part 1

  - by David Dorf

  This is the first in a three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Revolution Technology enables some amazing feats in retail. I can order flowers for my wife while flying 30,000 feet in the air. I can order my groceries in the subway and have them delivered later that day. I can even see how clothes look on me without setting foot in a store. Who knew that a TV, diamond necklace, or even a car would someday be as easy to purchase as a candy bar? Can technology make a mattress an impulse item? Wake-up and your back is hurting, so you rollover and grab your iPad, then a new mattress is delivered the next day. Behind the scenes the many processes are being choreographed to make the sale happen. This includes moving data between systems with the least amount for friction, which in some cases is near real-time. But real-time isn’t appropriate for all the integrations. Think about what a completely real-time retailer would look like. A consumer grabs toothpaste off the shelf, and all systems are immediately notified so that the backroom clerk comes running out and pushes the consumer aside so he can replace the toothpaste on the shelf. Such a system is not only cost prohibitive, but it’s also very inefficient and ineffectual. Retailers must balance the realities of people, processes, and systems to find the right speed of execution. That’ what “right-time retail” means. Retailers used to sell during the day and count the money and restock at night, but global expansion and the Web have complicated that simplistic viewpoint. Our 24hr society demands not only access but also speed, which constantly pushes the boundaries of our IT systems. In the last twenty years, there have been three major technology advancements that have moved us closer to real-time systems. Networking is the first technology that drove the real-time trend. As systems became connected, it became easier to move data between them. In retail we no longer had to mail the daily business report back to corporate each day as the dial-up modem could transfer the data. That was soon replaced with trickle-polling, when sale transactions were occasionally sent from stores to corporate throughout the day, often through VSAT. Then we got terrestrial networks like DSL and Ethernet that allowed the constant stream of data between stores and corporate. When corporate could see the sales transactions coming from stores, it could better plan for replenishment and promotions. That drove the need for speed into the supply chain and merchandising, but for many years those systems were stymied by the huge volumes of data. Nordstrom has 150 million SKU/Store combinations when planning (RPAS); The Gap generates 110 million price changes during end-of-season (RPM); Argos does 1.78 billion calculations executed each day for replenishment planning (AIP). These areas are now being alleviated by the second technology, storage. The typical laptop disk drive runs at 5,400rpm with PCs stepping up to 7,200rpm and servers hitting 15,000rpm. But the platters can only spin so fast, so to squeeze more performance we’ve had to rely on things like disk striping. Then solid state drives (SSDs) were introduced and prices continue to drop. (Augmenting your harddrive with a SSD is the single best PC upgrade these days.) RAM continues to be expensive, but compressing data in memory has allowed more efficient use. So a few years back, Oracle decided to build a box that incorporated all these advancements to move us closer to real-time. This family of products, often categorized as engineered systems, combines the hardware and software so that they work together to provide better performance. How much better? If Exadata powered a 747, you’d go from New York to Paris in 42 minutes, and it would carry 5,000 passengers. If Exadata powered baseball, games would last only 18 minutes and Boston’s Fenway would hold 370,000 fans. The Exa-family enables processing more data in less time. So with faster networks and storage, that brings us to the third and final ingredient. If we continue to process data in traditional ways, we won’t be able to take advantage of the faster networks and storage. Enter what Harvard calls “The Sexiest Job of the 21st Century” – the data scientist. New technologies like the Hadoop-powered Oracle Big Data Appliance, Oracle Advanced Analytics, and Oracle Endeca Information Discovery change the way in which we organize data. These technologies allow us to extract actionable information from raw data at incredible speeds, often ad-hoc. So the foundation to support the real-time enterprise exists, but how does a retailer begin to take advantage? The most visible way is through real-time marketing, but I’ll save that for part 3 and instead begin with improved integrations for the assets you already have in part 2.

  Read the article

• Why JSF Matters (to You)

  - by reza_rahman

        "Those who have knowledge, don’t predict. Those who predict, don’t have knowledge."                                                                                                    – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

  Read the article

• Data Source Connection Pool Sizing

  - by Steve Felts

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} One of the most time-consuming procedures of a database application is establishing a connection. The connection pooling of the data source can be used to minimize this overhead.  That argues for using the data source instead of accessing the database driver directly. Configuring the size of the pool in the data source is somewhere between an art and science – this article will try to move it closer to science.  From the beginning, WLS data source has had an initial capacity and a maximum capacity configuration values.  When the system starts up and when it shrinks, initial capacity is used.  The pool can grow to maximum capacity.  Customers found that they might want to set the initial capacity to 0 (more on that later) but didn’t want the pool to shrink to 0.  In WLS 10.3.6, we added minimum capacity to specify the lower limit to which a pool will shrink.  If minimum capacity is not set, it defaults to the initial capacity for upward compatibility.   We also did some work on the shrinking in release 10.3.4 to reduce thrashing; the algorithm that used to shrink to the maximum of the currently used connections or the initial capacity (basically the unused connections were all released) was changed to shrink by half of the unused connections. The simple approach to sizing the pool is to set the initial/minimum capacity to the maximum capacity.  Doing this creates all connections at startup, avoiding creating connections on demand and the pool is stable.  However, there are a number of reasons not to take this simple approach. When WLS is booted, the deployment of the data source includes synchronously creating the connections.  The more connections that are configured in initial capacity, the longer the boot time for WLS (there have been several projects for parallel boot in WLS but none that are available).  Related to creating a lot of connections at boot time is the problem of logon storms (the database gets too much work at one time).   WLS has a solution for that by setting the login delay seconds on the pool but that also increases the boot time. There are a number of cases where it is desirable to set the initial capacity to 0.  By doing that, the overhead of creating connections is deferred out of the boot and the database doesn’t need to be available.  An application may not want WLS to automatically connect to the database until it is actually needed, such as for some code/warm failover configurations. There are a number of cases where minimum capacity should be less than maximum capacity.  Connections are generally expensive to keep around.  They cause state to be kept on both the client and the server, and the state on the backend may be heavy (for example, a process).  Depending on the vendor, connection usage may cost money.  If work load is not constant, then database connections can be freed up by shrinking the pool when connections are not in use.  When using Active GridLink, connections can be created as needed according to runtime load balancing (RLB) percentages instead of by connection load balancing (CLB) during data source deployment. Shrinking is an effective technique for clearing the pool when connections are not in use.  In addition to the obvious reason that there times where the workload is lighter,  there are some configurations where the database and/or firewall conspire to make long-unused or too-old connections no longer viable.  There are also some data source features where the connection has state and cannot be used again unless the state matches the request.  Examples of this are identity based pooling where the connection has a particular owner and XA affinity where the connection is associated with a particular RAC node.  At this point, WLS does not re-purpose (discard/replace) connections and shrinking is a way to get rid of the unused existing connection and get a new one with the correct state when needed. So far, the discussion has focused on the relationship of initial, minimum, and maximum capacity.  Computing the maximum size requires some knowledge about the application and the current number of simultaneously active users, web sessions, batch programs, or whatever access patterns are common.  The applications should be written to only reserve and close connections as needed but multiple statements, if needed, should be done in one reservation (don’t get/close more often than necessary).  This means that the size of the pool is likely to be significantly smaller then the number of users.   If possible, you can pick a size and see how it performs under simulated or real load.  There is a high-water mark statistic (ActiveConnectionsHighCount) that tracks the maximum connections concurrently used.  In general, you want the size to be big enough so that you never run out of connections but no bigger.   It will need to deal with spikes in usage, which is where shrinking after the spike is important.  Of course, the database capacity also has a big influence on the decision since it’s important not to overload the database machine.  Planning also needs to happen if you are running in a Multi-Data Source or Active GridLink configuration and expect that the remaining nodes will take over the connections when one of the nodes in the cluster goes down.  For XA affinity, additional headroom is also recommended.  In summary, setting initial and maximum capacity to be the same may be simple but there are many other factors that may be important in making the decision about sizing.

  Read the article

• Are you reporting Visual Studio 2012 issues to Microsoft correctly?

  - by Tarun Arora

  Issues you may run into while using Visual Studio need to be reported to the Microsoft Product Team via the Microsoft connect site. The Microsoft team then tries to reproduce the issue using the details provided by you. If the information you provide isn’t sufficient to reproduce the issue the team tries to contact you for specifics, this not only increases the cycle time to resolution but the lack of communication also results in issues not being resolved. So, when I report an issue one part of me tells me to include as much detail about the issue as I can clubbing screen shots, repo steps, system information, visual studio version information,… the other half tells me this is so time consuming, leave it for now and come back to fill all these details later. Reporting a bug but not including the supporting information is an invitation to excuses like …     Microsoft has absolutely changed this experience for VS 2012. The Microsoft Visual Studio Feedback tool is designed to simplify the process of providing feedback and reporting issues to Microsoft that you may encounter while using Microsoft Visual Studio 2012. Note – The Microsoft Visual Studio 2012 Feedback client currently only works for VS 2012 and not any other versions of Visual Studio. Setting up the Microsoft Visual Studio 2012 Feedback client Open Visual Studio, from the Tools menu select Extension and Updates. In the Extension and Updates window, click Online from the left pane and search using the text ‘feedback’, download and Install Microsoft Visual Studio 2012 Feedback Tool by following the instructions from the wizard. Note - Restarting Visual Studio after the install is a must! How to report a bug for Visual Studio 2012? Click on the Help menu and choose Report a Bug You should see an icon Microsoft Visual Studio 2012 Feedback Tool come up in the system tray icon area You’ll need to accept the Privacy statement. You have the option of reporting the feedback as private or public. Microsoft works with several Partners, MVP’s and Vendors who get access to early bits of Microsoft products for valuation. This is where it becomes essential to report the feedback privately. I would choose the Public option otherwise. After all if it’s out there in the public, others can discover and add to it easily. You now have the option to report a new issue or add to an existing issue. Should you choose to add to an existing issue you should have the feedback ID of the issue available. This can be obtained from the Microsoft Connect site. For now I am going to focus on reporting a new feedback privately. Filling out the feedback details You will notice that VsInfo.xml and DxDiagOutput.txt are automatically attached as you enter this screen (more on that later).  Feedback Type Choose the feedback type from (Performance, Hang, Crash, Other) Note – The record button will only be enabled once you have enabled once you have chosen the feedback type, Bug-repro recording is not available for Windows Server 2008.     Effective Title and Description Enter a title that helps us differentiate the bug when it appears in a list, so that we can group it with any related bugs, assign it to a developer more effectively, and resolve it more quickly. Example: Imagine that you are submitting a bug because you tried to install Service Pack 1 and got a message that Visual Studio is not installed even though it is. Helpful:  Installed Visual Studio version not detected during Service Pack 1 setup. Not helpful:  Service Pack 1 problem. Tip: Write the problem description first, and then distil it to create a title. Example Description: Helpful: When I run Service Pack 1 Setup, I get the message "No Visual Studio version is detected" even though I have Visual Studio 2010 Ultimate and Visual C++ 2010 Express installed on my machine. Even though I uninstalled both editions, and then first reinstalled Ultimate and then Express, I still get the message. Record: Becoming a first class citizen Often a repro report is invaluable to describe and decipher the issue. Please use this feature to send actionable feedback. The record repro feature works differently depending on the feedback type you selected. Please find below details for each recording option. You can start recording simply by selecting a feedback type, and clicking on the “Record” button. When "Performance" is the bug type: When the Microsoft Visual Studio trace recorder starts, perform the actions that show the performance problem you want to report and then click on the "Stop Recording" button as soon as you experience the performance problem. Because the tool optimizes trace collection, you can run it for as long as it takes to show the problem, up to two hours. Note that, you need to stop recording as soon as the performance issue occurs, because the tool captures only the last couple minutes of your actions to optimize the trace collection. After you stop the recording, the tool takes up to two minutes to assemble the data and attach an ETLTrace.zip file to your bug report. The data includes information about Windows events and the Visual Studio code path. Note that, running the Microsoft Visual Studio trace recorder requires elevated user privilege. When "Crash" is the bug type: When the dialog box appears, select the running Visual Studio instance for which you want to show the steps that cause a crash. When the crash occurs, click on the "Stop Record" button. After you do this, two files are attached to your bug report - an AutomaticCrashDump.zip file that contains information about the crash and a ReproSteps.zip file that shows the repro steps. Repro steps are captured by Windows Problem Steps Recorder. Note that, you can pause the recording, and resume later, or for a specific step, you can add additional comments. When "Hang" is the bug type: The process for recording the steps that cause a hang resembles the one for crashes. The difference is, you can even collect a dump file after the VS hangs; start the VSFT either from the system tray or by starting a new instance of VS, select "Hang" as feedback type and click on the "Record" button. You will be prompted which VS to collect dump about, select the VS instance that hanged. VSFT collects a dump file regarding the hang, called MiniDump.zip, and attaches to your bug report. When "Other" is the bug type: When the problem step recorder starts, perform the actions that show the issue you want to report and then choose the "Stop” button. You can pause the recording, and resume later, or for a specific step, you can add additional comments. Once you’re done, ReproSteps.zip is added to your bug report. Pre-attached files It is essential for Microsoft to know what version of the the product are you currently using and what is the current configuration of your system. Note – The total size of all attachments in a bug report cannot exceed 2 GB, and every uncompressed attachment must be smaller than 512 MB. We recommend that you assemble all of your attachments, compress them together into a .zip file, and then attach the .zip file. Taking a screenshot Associate a screen shot by clicking the Take screenshot button, choose either the entire desktop, the specific monitor (useful if you are working in a multi monitor configuration) or the specific window in question. And finally … click Submit If you need further help, more details can be found here. You can view your feedback online by using the following URL “">https://connect.microsoft.com/VisualStudio/SearchResults.aspx?SearchQuery=<feedbackId>” Happy bug logging

  Read the article

• 2 javascripts problem

  - by pradeep

  <?php global $user; $userId = $user->uid; /* start with default */ $myresult = ""; /* All Includes - start */ include_once('db.php'); include_once('valid-scripts/validateData.php'); /* All Includes - end */ /* Build All required Variables - start */ $alias = $_GET['alias']; $product = $_GET['product']; $product = strtolower(substr($product,0,-1)); $master_table = $product.'_master'; $rating_master_table = $product.'_rating_master'; $rating_table = $product.'_rating'; $numProperties = 15; /* Build All required Variables - end */ /* Add all Styles required - start */ $myresult .= '<link href="/jquery.rating.css" type="text/css" rel="stylesheet"/>'; /* Add all Styles required - end */ /* Show Hide Variables/parameters - start */ include_once('all_include_files/show_hide.php'); /* Show Hide Variables/parameters - end */ /* All Javascript - start */ //$myresult .= '<script src="/jquery.rating.js" type="text/javascript" language="javascript"></script>'; ?> <style> #tabs { //font-size: 90%; //margin: 20px 0; margin: 2px 0; } #tabs ul { float: right; background: #E3FEFA; width: 600px; //padding-top: 4px; } #tabs li { margin-left: 8px; list-style: none; } * html #tabs li { display: inline; /* ie6 double float margin bug */ } #tabs li, #tabs li a { float: left; } #tabs ul li a { text-decoration: none; //padding: 8px; color: #0073BF; font-weight: bold; } #tabs ul li.active { background: #CEE1EF url(/all_include_files/img/nav-right.gif) no-repeat right top; } #tabs ul li.active a { background: url(/all_include_files/img/nav-left.gif) no-repeat left top; color: #333333; } #tabs div { //background: #CEE1EF; clear: both; //padding: 20px; min-height: 200px; } #tabs div h3 { text-transform: uppercase; margin-bottom: 10px; letter-spacing: 1px; #tabs div p { line-height: 150%; } </style> <script src="/jquery.rating.js" type="text/javascript" language="javascript"></script> <script src="/jquery.metadata.js" type="text/javascript" language="javascript"></script> <script type='text/javascript'> function openComment(number) { alert('working'); $('#comment'+number).css('display',''); } $('.star').rating({ callback: function(value, link){ alert(value); } }); $(document).ready(function() { //$('#tabs div').hide(); //$('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; }); $("#clickit").click(function() { $.post("/mobile/tablechange.php",{ p1:'<?php echo $brand ?>',p2:'<?php echo $model ?>',userid:'<?php echo $userid ?>' } ,function(data){ $("#changetable").html(data); }); }); $('div.expandable p').expander({ slicePoint: 200, // default is 100 expandText: 'more &raquo;', // default is 'read more...' collapseTimer: 0, // re-collapses after 5 seconds; default is 0, so no re-collapsing userCollapseText: '[^]' // default is '[collapse expanded text]' }); }); </script> <?php /* All Javascript - end */ /* Form Processing after submit - start */ /* Form Processing after submit - end */ /* Actual Form or Page - start */ /*fetch all data needed */ /* initial query */ $result_product = query_product_table($product,$alias); /*fetch property names of product */ $product_properties = master_table($master_table); /*rating table query */ $master_rating_properties = master_rating_table($rating_master_table); /*get user ratings*/ $user_ratings = user_ratings($userId,$alias,$rating_table); $myresult .= '<div class=\'Services\'>'; //$myresult .="<form name ='form1' id='form1' method = 'POST' action='".$_SERVER['php_self'] ."'>"; if(!$result_product) { header('Location: /page-not-found'); } else { $row_product = mysql_fetch_array($result_product); $myresult .= "<h3 class='newstyle'>".$row_product['alias']." <a style='float:right;padding-right:20px;color:white;text-decoration:underline;' href='/'>Back</a> </h3>"; /* start actual product display - start*/ $myresult .= "<div class=\"product\">"; /* start table 1*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\'>'; $myresult .= '<tr>'; $myresult .='<td valign=\'top\'>'; /* start table 2*/ $myresult .='<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= '<tr>'; $myresult .= '<td valign=\'top\' style=\'width:164px;\'>'; /* start table 3*/ $myresult .= '<table style=\'width:164px;\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= "<tr>"; /* start of the pic row */ $myresult .= '<td align=\'center\' class=\'various_product\'>'; if($row_product['pic'] != "") { $myresult .= '<ul id=\'mycarousel\' style=\'display:\';>'; $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic&p= \'rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/picdisplay1.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'\'></img></a></li>'; for($p = 1; $p <= 4; $p++) { if($row_product['pic'.$p] != "") { $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'&p='.rawurlencode($p).'\' rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/thumbpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'\'></img></a></li>'; } } $myresult .= '</ul>'; } else { $myresult .= "<img width='50' height='70' src='/images/no-image.gif'></img>"; } jcarousel_add('#mycarousel', array('horizontal' => TRUE,'scroll' => 1,'visible' => 1)); $myresult .= "</td>"; /* end display of pic td*/ $myresult .= "</tr>"; /* end display of pic tr*/ $myresult .= "</table></td>"; /* end display of pic table and earlier td - Still 1 open TR td table tr -hint*/ $myresult .= '<td style=\'width:450px;\'>'; /*table - 4*/ $myresult .= '<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'display:block;\'>'; /* Start showing property and values */ $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.ucfirst($product).':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['alias'] .'</td>'; $myresult .= "</tr>"; for($j = 3; $j <= 5 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$product_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for*/ /* show hide block */ $myresult .= '<tbody id=\'extra_properties\' style=\'display: none;\'>'; for($j = 6; $j <= 15 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$produtc_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for */ $myresult .= '</tbody>'; /* end show/hide tbody */ $myresult .= '<tr>'; $myresult .= '<td>'; $myresult .= '&nbsp;'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '&nbsp;'; $myresult .= '</td>'; $myresult .= '<td align=\'right\' style=\'text-align:right;text-decoration:underline;\'>'; $myresult .= '<a class=\'right_link\' href=\'javascript:showMore()\'>Show Additional Details...</a>'; $myresult .= '</td>'; $myresult .= '</tr>'; /* End showing property and values */ $showreview = 'display:'; /* review show hide */ /*$myresult .= '<tbody '.$showreview.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$numreviews = getreviewcount($brand,$model,'mobile_user_reviews'); if($numreviews > 0) { $myresult .= '<a href=\'mobilereviews?alias='.rawurlencode($alias).'\'> <span>$numreviews Reviews</span></a>'; } else { $myresult .= " $numreviews Reviews"; } $myresult .= "</span></td>"; $myresult .= "</tr>"; */ $myresult .= "</tbody>"; /* review show hide - end */ /* count show hide */ $myresult .= '<tbody '.$showcount.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$totalvotes = gettotalvotes($row['property1'],$row['property2'],'mobile_rating'); $myresult .= "</td>"; $myresult .= "</tr>"; $myresult .= "</tbody>"; /* count show hide - end */ $myresult .= "</table></td>"; /* end table 4 */ $myresult .= '</tr>'; /* end 1 row and remaining tr , td ,table */ $myresult .= '</table></td>'; $myresult .= '</tr>'; /* remianing only 1 table */ /* ratings - positive last section starts here */ $max= array(); for ($l = 1 ; $l < 15; $l++){ if($row_product['property'.$l.'_avg']){ $maxarray = 0; $maxarray = $row_product['property'.$l.'_avg']; $max['rating'.$l.'_name'] = $maxarray; } } if(count($max) >0 ) { include('all_include_files/min_max_properties.php'); } if(($row_product['freshness'] <= strtotime("-3 month"))) { $image_type= 'old'; } else if(($row_product['freshness'] <= strtotime("-2 month"))) { $image_type= 'bitold'; } else if(($row_product['freshness'] <= strtotime("-1 month")) || ($row_product['freshness'] > strtotime("-1 month"))) { $image_type= 'new'; } $img_name = $image_type; $myresult .= "<tr>"; $myresult .= "<td>"; $myresult .= "<table width='100%' border='0'>"; $myresult .= "<tr>"; $myresult .= "<td width='170' class=\"ratingz\"><span><u>Overall rating</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Positive</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Negative</u></span></td>"; if($img_name == 'new'){ $images = "<img src='/sites/default/files/battery-discharging-100.png' width='40' height='40'></img>"; } else if($img_name == 'bitold'){ $images = "<img src='/sites/default/files/battery-discharging-80.png' width='40' height='40'></img>"; } else if($img_name == 'old'){ $images = "<img src='/sites/default/files/battery-discharging-0.png' width='40' height='40'></img>"; } else { $images = ""; } $myresult .= "<td rowspan='2'><p ".$showbattery.">". $images ."</p></td>"; $myresult .= "</tr>"; $myresult .= "<tr>"; $myresult .= "<td>"; $i++; for($k = 0.5; $k <= 10.0; $k+=0.5) { $overall = roundOff($row_product['overall_rating']); if($overall == $k) { $chk ="checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled />'; } $myresult .= '</td>'; $myresult .= '<td ><span>'.$positive.'</span></td>'; $myresult .= '<td ><span>'.$negative.'</span></td>'; $myresult .= '</tr>'; $myresult .= '</table></td>'; $myresult .= '</tr>'; /* ratings - positive last section ends here */ $myresult .= '<tr>'; if($row_product['description'] != ""){ if(words_count($row_product['description']) > 8){ $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>&nbsp;&nbsp; <div class=\'expandable\'><p>'.$row_product['description'].'</div></p></p></td>'; } else { $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>&nbsp;&nbsp;'. $row_product['description'] .'</p></td>'; } } $myresult .= '</tr>'; $myresult .= '</table>'; /* end 1st table */ $myresult .= '</div>'; /* start actual product display - end*/ /*start the form to take ratings */ $myresult .= '<div id=\'tabs\'>'; $myresult .= '<ul>'; $myresult .= '<li><a href=\'#tab-1\'>Ratings</a></li>'; $myresult .= '<li><a href=\'#tab-2\'>Click here to rate</a></li>'; $myresult .= '</ul>'; $myresult .= '<div id=\'tab-1\'>'; /* actual rating table - start - jsut display ratings */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled ></a></th> '; /*$myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled >Click here to rate</a></th> ';*/ $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; $myresult .= '<td width=\'22%\'>'; $indfeature = 0; $indfeature = $row_product['property'.$i.'_avg']; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature .')'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; $tocheck = $indfeature; for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'drating'.$i.'\' id=\'drating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled \'/>'; } /* for k loop end */ $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'>&nbsp;</td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</div>'; /*end 1st tab */ /*start 2nd tab */ $myresult .= '<div id=\'tab-2\'>'; $myresult .= '<form name =\'form1\' id=\'form1\' method = \'POST\' action=\''.$_SERVER['php_self'] .'\'>'; /* actual rating table - start - actual rate/update */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; unset($i); /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; /*fetch ratings and comments - 1st make it to null */ $indfeature = 0; $comment = ''; $indfeature = $user_ratings['rating'.$i]; if($indfeature == NULL){ $indfeature = 0; } $comment = $user_ratings['rating'.$i.'_comment']; $myresult .= '<td width=\'22%\'>'; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature.' )'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; if(($userId != '0') && (is_array($user_ratings))) { $tocheck = $indfeature; } else { $tocheck = '0'; } for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'rating'.$i.'\' id=\'rating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' '.$disabled.' \' />'; } /* for k loop end */ $myresult .= '</td>'; $myresult .= '<td width=\'40%\'>'; $myresult .= '<input title=\'Reason for this Rating.. \'type=\'text\' size=\'25\' name=\'comment'.$i.'\' id=\'comment'.$i.'\' style=\'display:;\' maxlength=\'255\' value="'.$comment.'">'; $myresult .= '</td>'; $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'>&nbsp;</td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; if(($userId != '0') && (is_array($user_ratings))) { $myresult .= '<input type=\'button\' id=\'update_form\' value=\'Update\'>'; } else { $myresult .= '<input type=\'button\' id=\'save_form\' value=\'Save\'>'; } $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</form>'; /*end the form to take ratings */ $myresult .= '</div>'; /*end 2nd tab */ $myresult .= '</div>'; /*end tabs div */ /* actual rating table - end */ /* 1st form ends here id- ratings_form */ } /* end of if loop result_product loop */ /* start table 3 - overall comment*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'100%\' colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Overall Comments</span></th>'; $myresult .= '<th colspan=\'3\' class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'4\'>'; $myresult .= '<textarea title=\'OverAll Comment\' name=\'overall_comment\' cols=\'65\'></textarea>'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tbody>'; $myresult .= '</table>'; /* end table 3 - overall comment*/ /* start table 4 - summary*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Your Opinion</span></th>'; $myresult .= '<th colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Do you Agree with the Ratings'; $myresult .= '</td>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Was the Information Helpful'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tr>'; $myresult .= '<form name=\'form2\' id=\'form2\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'agree\' value=\'agree\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'disagree\' value=\'disagree\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'agree_disagree\' id=\'agree_disagree\'>'; $myresult .= '</form>'; $myresult .= '<form name=\'form3\' id=\'form3\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'helpful\' value=\'Helpful\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'nothelpful\' value=\'Not Helpful\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'help_nohelp\' id=\'help_nohelp\'>'; $myresult .= '</form>'; $myresult .= '</tr>'; $myresult .= '</tbody>'; $myresult .= '</table>'; /*end table 4 summary table */ $myresult .= '</div>'; /* Actual Form or Page - end */ echo $myresult; //echo 'Product: '.$product; //echo '<br/>Alias: '.$alias; ?> hey this code is working fine for me . as required. the star class code is taken from http://www.fyneworks.com/jquery/star-rating/ ... it works well.. but when i insert code to add tabs for content ,the starts is not visible at all. but when i check source code. the stars are actually there . dono whats the prob. any suggestions on this this is the tabs code $('#tabs div').hide(); ('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; });

  Read the article

• SharePoint 2010 - Access denied during ApplyWebConfigModifications()

  - by tcoalson

  I have SharePoint 2010 installed on a Windows Server 2008 R2 machine which is also hosting SQL Sever 2008 R2. I am attempting to deploy a solution that includes web parts in the 2010 environment that is working fine in MOSS 2007. The Web Part feature has a feature receiver that updates the web.config. When I try to activate the feature through the Site Collection Feature GUI, I receive an access denied message. I am logged on to the server and in SharePoint with the APP Pool account which is also a member of the domain administrator group, local administrator group and SharePoint Farm Admin group. This account is also dbo on SQL Server. This same feature activates fine using the stsadm command. I have dug into this issue at length and here is what I have found: Looking at the Microsoft assemblies in reflector, my error is coming from the SPWebApplication.ApplyWebConfigModifications() method. I can see the trace statements from SPWebConfigFileChanges.RemoveModificationsWebConfigXMLDocument and SPWebConfigFileChanges.ApplyModificationsWebConfigXMLDocument. The next line is a Save(str). Below is the output from the SharePoint logs that pertain to this error: Apply web config modifications to web app 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation General 8grn Medium WebConfigModification: Applying web config modifications to web app in server tw-s1-m4400-007 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 88gw Medium WebConfigModification: Applying web config modifications to file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/system.web/httpModules Node name add[@name='JivePageController'] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/system.web/httpHandlers Node name add[@path='ScriptResource.axd'] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name [local-name()="dependentAssembly"][/@name="System.Web.Extensions.Design"] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name [local-name()="dependentAssembly"][/@name="System.Web.Extensions"] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name - [local-name()="dependentAssembly"][/@name="System.Web.Extensions"] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name - [local-name()="dependentAssembly"][/@name="System.Web.Extensions.Design"] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/system.web/httpHandlers Node name - add[@path='ScriptResource.axd'] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/system.web/httpModules Node name - add[@name='JivePageController'] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x15C4) 0x1444 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://tw-s1-m4400-007.jivedemo.local:32843/15702467ece1408f881abeabac3b5077/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: xxx MessageId: 'urn:uuid:4e859532-ed7f-4937-8b88-68d3af43d589' 9f403ede-2c94-490b-a05c-e169cc5fe58d 02/24/2010 16:05:41.10 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology f6kh High WebConfigModification: Save of web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config for applying modifications to web app SharePoint - 2008 failed. Error message - Access to the path 'C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config' is denied. 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.10 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8j2o High WebConfigModification: Changes not applied to web application SharePoint - 2008 with Url xxx 5a817a37-7bf6-4d26-be51-207369e38f5b Any help would be appreciated!

  Read the article

• Failed to Install Xdebug

  - by burnt1ce

  've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. I've used both "zend_extention" and "zend_extention_ts" to specify the path of the xdebug dll. I ensured that my apache server restarted and used the latest change of my php.ini by executing "httpd -k restart". Can anyone provide any suggestions in getting xdebug to show up? Here are the contents of my php.ini file. [PHP] ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; PHP's initialization file, generally called php.ini, is responsible for ; configuring many of the aspects of PHP's behavior. ; PHP attempts to find and load this configuration from a number of locations. ; The following is a summary of its search order: ; 1. SAPI module specific location. ; 2. The PHPRC environment variable. (As of PHP 5.2.0) ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) ; 4. Current working directory (except CLI) ; 5. The web server's directory (for SAPI modules), or directory of PHP ; (otherwise in Windows) ; 6. The directory from the --with-config-file-path compile time option, or the ; Windows directory (C:\windows or C:\winnt) ; See the PHP docs for more specific information. ; http://php.net/configuration.file ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; Directives following the section heading [PATH=/www/mysite] only ; apply to PHP files in the /www/mysite directory. Directives ; following the section heading [HOST=www.example.com] only apply to ; PHP files served from www.example.com. Directives set in these ; special sections cannot be overridden by user-defined INI files or ; at runtime. Currently, [PATH=] and [HOST=] sections only work under ; CGI/FastCGI. ; http://php.net/ini.sections ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; Directives are variables used to configure PHP or PHP extensions. ; There is no name validation. If PHP can't find an expected ; directive because it is not set or is mistyped, a default value will be used. ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a ; previously set variable or directive (e.g. ${foo}) ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; ^ bitwise XOR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; foo = ; sets foo to an empty string ; foo = None ; sets foo to an empty string ; foo = "None" ; sets foo to the string 'None' ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; PHP comes packaged with two INI files. One that is recommended to be used ; in production environments and one that is recommended to be used in ; development environments. ; php.ini-production contains settings which hold security, performance and ; best practices at its core. But please be aware, these settings may break ; compatibility with older or less security conscience applications. We ; recommending using the production ini in production and testing environments. ; php.ini-development is very similar to its production variant, except it's ; much more verbose when it comes to errors. We recommending using the ; development version only in development environments as errors shown to ; application users can inadvertently leak otherwise secure information. ;;;;;;;;;;;;;;;;;;; ; Quick Reference ; ;;;;;;;;;;;;;;;;;;; ; The following are all the settings which are different in either the production ; or development versions of the INIs with respect to PHP's default behavior. ; Please see the actual settings later in the document for more details as to why ; we recommend these changes in PHP's behavior. ; allow_call_time_pass_reference ; Default Value: On ; Development Value: Off ; Production Value: Off ; display_errors ; Default Value: On ; Development Value: On ; Production Value: Off ; display_startup_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; error_reporting ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; html_errors ; Default Value: On ; Development Value: On ; Production value: Off ; log_errors ; Default Value: Off ; Development Value: On ; Production Value: On ; magic_quotes_gpc ; Default Value: On ; Development Value: Off ; Production Value: Off ; max_input_time ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; output_buffering ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; register_argc_argv ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_long_arrays ; Default Value: On ; Development Value: Off ; Production Value: Off ; request_order ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; session.bug_compat_42 ; Default Value: On ; Development Value: On ; Production Value: Off ; session.bug_compat_warn ; Default Value: On ; Development Value: On ; Production Value: Off ; session.gc_divisor ; Default Value: 100 ; Development Value: 1000 ; Production Value: 1000 ; session.hash_bits_per_character ; Default Value: 4 ; Development Value: 5 ; Production Value: 5 ; short_open_tag ; Default Value: On ; Development Value: Off ; Production Value: Off ; track_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; url_rewriter.tags ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; variables_order ; Default Value: "EGPCS" ; Development Value: "GPCS" ; Production Value: "GPCS" ;;;;;;;;;;;;;;;;;;;; ; php.ini Options ; ;;;;;;;;;;;;;;;;;;;; ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" ;user_ini.filename = ".user.ini" ; To disable this feature set this option to empty value ;user_ini.filename = ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) ;user_ini.cache_ttl = 300 ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. ; http://php.net/engine engine = On ; This directive determines whether or not PHP will recognize code between ; <? and ?> tags as PHP source which should be processed as such. It's been ; recommended for several years that you not use the short tag "short cut" and ; instead to use the full <?php and ?> tag combination. With the wide spread use ; of XML and use of these tags by other languages, the server can become easily ; confused and end up parsing the wrong code in the wrong context. But because ; this short cut has been a feature for such a long time, it's currently still ; supported for backwards compatibility, but we recommend you don't use them. ; Default Value: On ; Development Value: Off ; Production Value: Off ; http://php.net/short-open-tag short_open_tag = Off ; Allow ASP-style <% %> tags. ; http://php.net/asp-tags asp_tags = Off ; The number of significant digits displayed in floating point numbers. ; http://php.net/precision precision = 14 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) ; http://php.net/y2k-compliance y2k_compliance = On ; Output buffering is a mechanism for controlling how much output data ; (excluding headers and cookies) PHP should keep internally before pushing that ; data to the client. If your application's output exceeds this setting, PHP ; will send that data in chunks of roughly the size you specify. ; Turning on this setting and managing its maximum buffer size can yield some ; interesting side-effects depending on your application and web server. ; You may be able to send headers and cookies after you've already sent output ; through print or echo. You also may see performance benefits if your server is ; emitting less packets due to buffered output versus PHP streaming the output ; as it gets it. On production servers, 4096 bytes is a good setting for performance ; reasons. ; Note: Output buffering can also be controlled via Output Buffering Control ; functions. ; Possible Values: ; On = Enabled and buffer is unlimited. (Use with caution) ; Off = Disabled ; Integer = Enables the buffer and sets its maximum size in bytes. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; http://php.net/output-buffering output_buffering = Off ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ; http://php.net/output-handler ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. ; http://php.net/zlib.output-compression zlib.output_compression = Off ; http://php.net/zlib.output-compression-level ;zlib.output_compression_level = -1 ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ; http://php.net/zlib.output-handler ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. ; http://php.net/implicit-flush ; Note: This directive is hardcoded to On for the CLI SAPI implicit_flush = Off ; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. A warning appears if the specified function is ; not defined, or if the function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func = ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100 ; This directive allows you to enable and disable warnings which PHP will issue ; if you pass a value by reference at function call time. Passing values by ; reference at function call time is a deprecated feature which will be removed ; from PHP at some point in the near future. The acceptable method for passing a ; value by reference to a function is by declaring the reference in the functions ; definition, not at call time. This directive does not disable this feature, it ; only determines whether PHP will warn you about it or not. These warnings ; should enabled in development environments only. ; Default Value: On (Suppress warnings) ; Development Value: Off (Issue warnings) ; Production Value: Off (Issue warnings) ; http://php.net/allow-call-time-pass-reference allow_call_time_pass_reference = On ; Safe Mode ; http://php.net/safe-mode safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. ; http://php.net/safe-mode-gid safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) ; http://php.net/safe-mode-include-dir safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. ; http://php.net/safe-mode-exec-dir safe_mode_exec_dir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! ; http://php.net/safe-mode-allowed-env-vars safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. ; http://php.net/safe-mode-protected-env-vars safe_mode_protected_env_vars = LD_LIBRARY_PATH ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/open-basedir ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-functions disable_functions = ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-classes disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ; http://php.net/syntax-highlighting ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long requests, which may end up ; being interrupted by the user or a browser timing out. PHP's default behavior ; is to disable this feature. ; http://php.net/ignore-user-abort ;ignore_user_abort = On ; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; http://php.net/realpath-cache-size ;realpath_cache_size = 16k ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://php.net/realpath-cache-ttl ;realpath_cache_ttl = 120 ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. ; http://php.net/expose-php expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; ; Maximum execution time of each script, in seconds ; http://php.net/max-execution-time ; Note: This directive is hardcoded to 0 for the CLI SAPI max_execution_time = 60 ; Maximum amount of time each script may spend parsing request data. It's a good ; idea to limit this time on productions servers in order to eliminate unexpectedly ; long running scripts. ; Note: This directive is hardcoded to -1 for the CLI SAPI ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; http://php.net/max-input-time max_input_time = 60 ; Maximum input variable nesting level ; http://php.net/max-input-nesting-level ;max_input_nesting_level = 64 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 128M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; This directive informs PHP of which errors, warnings and notices you would like ; it to take action for. The recommended way of setting values for this ; directive is through the use of the error level constants and bitwise ; operators. The error level constants are below here for convenience as well as ; some common settings and their meanings. ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT ; those related to E_NOTICE and E_STRICT, which together cover best practices and ; recommended coding standards in PHP. For performance reasons, this is the ; recommend error reporting setting. Your production server shouldn't be wasting ; resources complaining about best practices and coding standards. That's what ; development servers and development settings are for. ; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This ; means it pretty much reports everything which is exactly what you want during ; development and early testing. ; ; Error Level Constants: ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; E_DEPRECATED - warn about code that will not work in future versions ; of PHP ; E_USER_DEPRECATED - user-generated deprecation warnings ; ; Common Values: ; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) ; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) ; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; http://php.net/error-reporting error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED ; This directive controls whether or not and where PHP will output errors, ; notices and warnings too. Error output is very useful during development, but ; it could be very dangerous in production environments. Depending on the code ; which is triggering the error, sensitive information could potentially leak ; out of your application such as database usernames and passwords or worse. ; It's recommended that errors be logged on production servers rather than ; having the errors sent to STDOUT. ; Possible Values: ; Off = Do not display any errors ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) ; On or stdout = Display errors to STDOUT ; Default Value: On ; Development Value: On ; Production Value: Off ; http://php.net/display-errors display_errors = On ; The display of errors which occur during PHP's startup sequence are handled ; separately from display_errors. PHP's default behavior is to suppress those ; errors from clients. Turning the display of startup errors on can be useful in ; debugging configuration problems. But, it's strongly recommended that you ; leave this setting off on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/display-startup-errors display_startup_errors = On ; Besides displaying errors, PHP can also log errors to locations such as a ; server-specific log, STDERR, or a location specified by the error_log ; directive found below. While errors should not be displayed on productions ; servers they should still be monitored and logging is a great way to do that. ; Default Value: Off ; Development Value: On ; Production Value: On ; http://php.net/log-errors log_errors = Off ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. ; http://php.net/log-errors-max-len log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line unless ignore_repeated_source is set true. ; http://php.net/ignore-repeated-errors ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ; http://php.net/ignore-repeated-source ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list ; http://php.net/report-memleaks report_memleaks = On ; This setting is on by default. ;report_zend_debug = 0 ; Store the last error/warning message in $php_errormsg (boolean). Setting this value ; to On can assist in debugging and is appropriate for development servers. It should ; however be disabled on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/track-errors track_errors = Off ; Turn off normal error reporting and emit XML-RPC error XML ; http://php.net/xmlrpc-errors ;xmlrpc_errors = 0 ; An XML-RPC faultCode ;xmlrpc_error_number = 0 ; When PHP displays or logs an error, it has the capability of inserting html ; links to documentation related to that error. This directive controls whether ; those HTML links appear in error messages or not. For performance and security ; reasons, it's recommended you disable this on production servers. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: On ; Development Value: On ; Production value: Off ; http://php.net/html-errors html_errors = On ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://php.net/docs ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. PHP's default behavior is to leave these settings empty. ; Note: Never use this feature for production boxes. ; http://php.net/docref-root ; Examples ;docref_root = "/phpmanual/" ; http://php.net/docref-ext ;docref_ext = .html ; String to output before an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-prepend-string ; Example: ;error_prepend_string = "<font color=#ff0000>" ; String to output after an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-append-string ; Example: ;error_append_string = "</font>" ; Log errors to specified file. PHP's default behavior is to leave this value ; empty. ; http://php.net/error-log ; Example: ;error_log = php_errors.log ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;error_log = "C:\xampp\apache\logs\php_error.log" ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; Note - track_vars is ALWAYS enabled ; The separator used in PHP generated URLs to separate arguments. ; PHP's default setting is "&". ; http://php.net/arg-separator.output ; Example: arg_separator.output = "&amp;" ; List of separator(s) used by PHP to parse input URLs into variables. ; PHP's default setting is "&

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >