Search Results

Search found 15931 results on 638 pages for 'password storage'.

Page 190/638 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• External USB drive is failing

  - by dma_k

  I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

  Read the article

• The Inkremental Architect&acute;s Napkin - #4 - Make increments tangible

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/12/the-inkremental-architectacutes-napkin---4---make-increments-tangible.aspxThe driver of software development are increments, small increments, tiny increments. With an increment being a slice of the overall requirement scope thin enough to implement and get feedback from a product owner within 2 days max. Such an increment might concern Functionality or Quality.[1] To make such high frequency delivery of increments possible, the transition from talking to coding needs to be as easy as possible. A user story or some other documentation of what´s supposed to get implemented until tomorrow evening at latest is one side of the medal. The other is where to put the logic in all of the code base. To implement an increment, only logic statements are needed. Functionality like Quality are just about expressions and control flow statements. Think of Assembler code without the CALL/RET instructions. That´s all is needed. Forget about functions, forget about classes. To make a user happy none of that is really needed. It´s just about the right expressions and conditional executions paths plus some memory allocation. Automatic function inlining of compilers which makes it clear how unimportant functions are for delivering value to users at runtime. But why then are there functions? Because they were invented for optimization purposes. We need them for better Evolvability and Production Efficiency. Nothing more, nothing less. No software has become faster, more secure, more scalable, more functional because we gathered logic under the roof of a function or two or a thousand. Functions make logic easier to understand. Functions make us faster in producing logic. Functions make it easier to keep logic consistent. Functions help to conserve memory. That said, functions are important. They are even the pivotal element of software development. We can´t code without them - whether you write a function yourself or not. Because there´s always at least one function in play: the Entry Point of a program. In Ruby the simplest program looks like this:puts "Hello, world!" In C# more is necessary:class Program { public static void Main () { System.Console.Write("Hello, world!"); } } C# makes the Entry Point function explicit, not so Ruby. But still it´s there. So you can think of logic always running in some function. Which brings me back to increments: In order to make the transition from talking to code as easy as possible, it has to be crystal clear into which function you should put the logic. Product owners might be content once there is a sticky note a user story on the Scrum or Kanban board. But developers need an idea of what that sticky note means in term of functions. Because with a function in hand, with a signature to run tests against, they have something to focus on. All´s well once there is a function behind whose signature logic can be piled up. Then testing frameworks can be used to check if the logic is correct. Then practices like TDD can help to drive the implementation. That´s why most code katas define exactly how the API of a solution should look like. It´s a function, maybe two or three, not more. A requirement like “Write a function f which takes this as parameters and produces such and such output by doing x” makes a developer comfortable. Yes, there are all kinds of details to think about, like which algorithm or technology to use, or what kind of state and side effects to consider. Even a single function not only must deliver on Functionality, but also on Quality and Evolvability. Nevertheless, once it´s clear which function to put logic in, you have a tangible starting point. So, yes, what I´m suggesting is to find a single function to put all the logic in that´s necessary to deliver on a the requirements of an increment. Or to put it the other way around: Slice requirements in a way that each increment´s logic can be located under the roof of a single function. Entry points Of course, the logic of a software will always be spread across many, many functions. But there´s always an Entry Point. That´s the most important function for each increment, because that´s the root to put integration or even acceptance tests on. A batch program like the above hello-world application only has a single Entry Point. All logic is reached from there, regardless how deep it´s nested in classes. But a program with a user interface like this has at least two Entry Points: One is the main function called upon startup. The other is the button click event handler for “Show my score”. But maybe there are even more, like another Entry Point being a handler for the event fired when one of the choices gets selected; because then some logic could check if the button should be enabled because all questions got answered. Or another Entry Point for the logic to be executed when the program is close; because then the choices made should be persisted. You see, an Entry Point to me is a function which gets triggered by the user of a software. With batch programs that´s the main function. With GUI programs on the desktop that´s event handlers. With web programs that´s handlers for URL routes. And my basic suggestion to help you with slicing requirements for Spinning is: Slice them in a way so that each increment is related to only one Entry Point function.[2] Entry Points are the “outer functions” of a program. That´s where the environment triggers behavior. That´s where hardware meets software. Entry points always get called because something happened to hardware state, e.g. a key was pressed, a mouse button clicked, the system timer ticked, data arrived over a wire.[3] Viewed from the outside, software is just a collection of Entry Point functions made accessible via buttons to press, menu items to click, gestures, URLs to open, keys to enter. Collections of batch processors I´d thus say, we haven´t moved forward since the early days of software development. We´re still writing batch programs. Forget about “event-driven programming” with its fancy GUI applications. Software is just a collection of batch processors. Earlier it was just one per program, today it´s hundreds we bundle up into applications. Each batch processor is represented by an Entry Point as its root that works on a number of resources from which it reads data to process and to which it writes results. These resources can be the keyboard or main memory or a hard disk or a communication line or a display. Together many batch processors - large and small - form applications the user perceives as a single whole: Software development that way becomes quite simple: just implement one batch processor after another. Well, at least in principle ;-) Features Each batch processor entered through an Entry Point delivers value to the user. It´s an increment. Sometimes its logic is trivial, sometimes it´s very complex. Regardless, each Entry Point represents an increment. An Entry Point implemented thus is a step forward in terms of Agility. At the same time it´s a tangible unit for developers. Therefore, identifying the more or less numerous batch processors in a software system is a rewarding task for product owners and developers alike. That´s where user stories meet code. In this example the user story translates to the Entry Point triggered by clicking the login button on a dialog like this: The batch then retrieves what has been entered via keyboard, loads data from a user store, and finally outputs some kind of response on the screen, e.g. by displaying an error message or showing the next dialog. This is all very simple, but you see, there is not just one thing happening, but several. Get input (email address, password) Load user for email address If user not found report error Check password Hash password Compare hash to hash stored in user Show next dialog Viewed from 10,000 feet it´s all done by the Entry Point function. And of course that´s technically possible. It´s just a bunch of logic and calling a couple of API functions. However, I suggest to take these steps as distinct aspects of the overall requirement described by the user story. Such aspects of requirements I call Features. Features too are increments. Each provides some (small) value of its own to the user. Each can be checked individually by a product owner. Instead of implementing all the logic behind the Login() entry point at once you can move forward increment by increment, e.g. First implement the dialog, let the user enter any credentials, and log him/her in without any checks. Features 1 and 4. Then hard code a single user and check the email address. Features 2 and 2.1. Then check password without hashing it (or use a very simple hash like the length of the password). Features 3. and 3.2 Replace hard coded user with a persistent user directoy, but a very simple one, e.g. a CSV file. Refinement of feature 2. Calculate the real hash for the password. Feature 3.1. Switch to the final user directory technology. Each feature provides an opportunity to deliver results in a short amount of time and get feedback. If you´re in doubt whether you can implement the whole entry point function until tomorrow night, then just go for a couple of features or even just one. That´s also why I think, you should strive for wrapping feature logic into a function of its own. It´s a matter of Evolvability and Production Efficiency. A function per feature makes the code more readable, since the language of requirements analysis and design is carried over into implementation. It makes it easier to apply changes to features because it´s clear where their logic is located. And finally, of course, it lets you re-use features in different context (read: increments). Feature functions make it easier for you to think of features as Spinning increments, to implement them independently, to let the product owner check them for acceptance individually. Increments consist of features, entry point functions consist of feature functions. So you can view software as a hierarchy of requirements from broad to thin which map to a hierarchy of functions - with entry points at the top.   I like this image of software as a self-similar structure on many levels of abstraction where requirements and code match each other. That to me is true agile design: the core tenet of Agility to move forward in increments is carried over into implementation. Increments on paper are retained in code. This way developers can easily relate to product owners. Elusive and fuzzy requirements are not tangible. Software production is moving forward through requirements one increment at a time, and one function at a time. In closing Product owners and developers are different - but they need to work together towards a shared goal: working software. So their notions of software need to be made compatible, they need to be connected. The increments of the product owner - user stories and features - need to be mapped straightforwardly to something which is relevant to developers. To me that´s functions. Yes, functions, not classes nor components nor micro services. We´re talking about behavior, actions, activities, processes. Their natural representation is a function. Something has to be done. Logic has to be executed. That´s the purpose of functions. Later, classes and other containers are needed to stay on top of a growing amount of logic. But to connect developers and product owners functions are the appropriate glue. Functions which represent increments. Can there always be such a small increment be found to deliver until tomorrow evening? I boldly say yes. Yes, it´s always possible. But maybe you´ve to start thinking differently. Maybe the product owner needs to start thinking differently. Completion is not the goal anymore. Neither is checking the delivery of an increment through the user interface of a software. Product owners need to become comfortable using test beds for certain features. If it´s hard to slice requirements thin enough for Spinning the reason is too little knowledge of something. Maybe you don´t yet understand the problem domain well enough? Maybe you don´t yet feel comfortable with some tool or technology? Then it´s time to acknowledge this fact. Be honest about your not knowing. And instead of trying to deliver as a craftsman officially become a researcher. Research an check back with the product owner every day - until your understanding has grown to a level where you are able to define the next Spinning increment. ? Sometimes even thin requirement slices will cover several Entry Points, like “Add validation of email addresses to all relevant dialogs.” Validation then will it put into a dozen functons. Still, though, it´s important to determine which Entry Points exactly get affected. That´s much easier, if strive for keeping the number of Entry Points per increment to 1. ? If you like call Entry Point functions event handlers, because that´s what they are. They all handle events of some kind, whether that´s palpable in your code or note. A public void btnSave_Click(object sender, EventArgs e) {…} might look like an event handler to you, but public static void Main() {…} is one also - for then event “program started”. ?

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• Releasing an OLE IStorage file handle in C#

  - by Bernard Darnton

  I'm trying to embed a PDF file into a Word document using the OLE technique described here: http://blogs.msdn.com/brian_jones/archive/2009/07/21/embedding-any-file-type-like-pdf-in-an-open-xml-file.aspx I've tried to implement to C++ code provided in C# so that the whole project's in one place and am almost there except for one roadblock. When I try to feed the generated OLE object binary data into the Word document I get an IOException. IOException: The process cannot access the file 'C:\Wherever\Whatever.pdf.bin' because it is being used by another process. There is a file handle open the .bin file and I don't know how to get rid of it. I don't know a huge amount about COM - I'm winging it here - and I don't know where the file handle is or how to release it. Here's what my C#-ised code looks like. What am I missing? public void ExportOleFile(string oleOutputFileName, string emfOutputFileName) { OLE32.IStorage storage; var result = OLE32.StgCreateStorageEx( oleOutputFileName, OLE32.STGM.STGM_READWRITE | OLE32.STGM.STGM_SHARE_EXCLUSIVE | OLE32.STGM.STGM_CREATE | OLE32.STGM.STGM_TRANSACTED, OLE32.STGFMT.STGFMT_DOCFILE, 0, IntPtr.Zero, IntPtr.Zero, ref OLE32.IID_IStorage, out storage ); var CLSID_NULL = Guid.Empty; OLE32.IOleObject pOle; result = OLE32.OleCreateFromFile( ref CLSID_NULL, _inputFileName, ref OLE32.IID_IOleObject, OLE32.OLERENDER.OLERENDER_NONE, IntPtr.Zero, null, storage, out pOle ); result = OLE32.OleRun(pOle); IntPtr unknownFromOle = Marshal.GetIUnknownForObject(pOle); IntPtr unknownForDataObj; Marshal.QueryInterface(unknownFromOle, ref OLE32.IID_IDataObject, out unknownForDataObj); var pdo = Marshal.GetObjectForIUnknown(unknownForDataObj) as IDataObject; var fetc = new FORMATETC(); fetc.cfFormat = (short)OLE32.CLIPFORMAT.CF_ENHMETAFILE; fetc.dwAspect = DVASPECT.DVASPECT_CONTENT; fetc.lindex = -1; fetc.ptd = IntPtr.Zero; fetc.tymed = TYMED.TYMED_ENHMF; var stgm = new STGMEDIUM(); stgm.unionmember = IntPtr.Zero; stgm.tymed = TYMED.TYMED_ENHMF; pdo.GetData(ref fetc, out stgm); var hemf = GDI32.CopyEnhMetaFile(stgm.unionmember, emfOutputFileName); storage.Commit((int)OLE32.STGC.STGC_DEFAULT); pOle.Close(0); GDI32.DeleteEnhMetaFile(stgm.unionmember); GDI32.DeleteEnhMetaFile(hemf); }

  Read the article

• Cube project doesn't work because of permissions

  - by sms

  I'm doing "Multidimensional Project" with MS SQL Server 2012 (Server Data Tools - Visual Studio 2010 Shell). I can't run (debug) it. If the data source's impersonation information is set to "use the service account", this error occures: Error 2 Internal error: The operation terminated unsuccessfully. 0 0 Error 3 OLE DB error: OLE DB or ODBC error: Login failed for user 'NT Service\MSSQLServerOLAPService'.; 28000. 0 0 Error 4 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Data Warehouse', Name of 'Data Warehouse'. 0 0 Error 5 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Items', Name of 'Items' was being processed. 0 0 Error 6 Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'Items' dimension from the 'Warehouse_MultidimensionalProject_Cube' database was being processed. 0 0 Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0 I guessed that this account has no premissions but (1) I coudn't even add this account (it seems that it doesn't exist) and (2) how is that even possible for it to not have built-it poremissions? When I'm setting impersonation to "use the credentials of current user" (which is the owner of the data source, btw.), another error occures: Error 2 Internal error: The operation terminated unsuccessfully. 0 0 Error 3 The datasource, 'Data Warehouse', contains an ImpersonationMode that is not supported for processing operations. 0 0 Error 4 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Data Warehouse', Name of 'Data Warehouse'. 0 0 Error 5 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Items', Name of 'Items' was being processed. 0 0 Error 6 Errors in the OLAP storage engine: An error occurred while the 'Id' attribute of the 'Items' dimension from the 'Warehouse_MultidimensionalProject_Cube' database was being processed. 0 0 Error 7 Server: The current operation was cancelled because another operation in the transaction failed. 0 0 Any help?

  Read the article

• Paperclip: delete attachment and "can't convert nil into String" error

  - by snitko

  I'm using Paperclip and here's what I do in the model to delete attachments: def before_save self.avatar = nil if @delete_avatar == 1.to_s end Works fine unless @delete_avatar flag is set when the user is actually uploading the image (so the model receives both params[:user][:avatar] and params[:user][:delete_avatar]. This results in the following error: TypeError: can't convert nil into String from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:40:in `dirname' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:40:in `flush_writes' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:38:in `each' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:38:in `flush_writes' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/attachment.rb:144:in `save' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/attachment.rb:162:in `destroy' from /Work/project/src/app/models/user.rb:72:in `before_save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:347:in `send' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:347:in `callback' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:249:in `create_or_update' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:2538:in `save_without_validation' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/validations.rb:1078:in `save_without_dirty' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/dirty.rb:79:in `save_without_transactions' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:229:in `send' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:229:in `with_transaction_returning_status' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/database_statements.rb:136:in `transaction' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:182:in `transaction' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:228:in `with_transaction_returning_status' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:196:in `save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:208:in `rollback_active_record_state!' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:196:in `save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:723:in `create' I assume it has something to do with the avatar.dirty? value because when it certainly is true when this happens. The question is, how do I totally reset the thing if there are changes to be saved and abort avatar upload when the flag is set?

  Read the article

• jets3t and Downloading Files from AmazonS3 with Different Name

  - by Gregg

  We're using AmazonS3 for file storage and recently found out that we need to keep some sort of directory structure. Since S3 doesn't allow that, we know we can name the files according to their structure for storage. For example... abc/123/draft.doc What I want to know is if I want to provide a public link to this particular file is there anyway that the file can simply be draft.doc instead of abc/123/draft.doc ?

  Read the article

• Paperclip: delete attachments and "can't convert nil into String" error

  - by snitko

  I'm using Paperclip and here's what I do in the model to delete attachments: def before_save self.avatar = nil if @delete_avatar == 1.to_s end Works fine unless @delete_avatar flag is set when the user is actually uploading the image (so the model receives both params[:user][:avatar] and params[:user][:delete_avatar]. This results in the following error: TypeError: can't convert nil into String from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:40:in `dirname' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:40:in `flush_writes' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:38:in `each' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/storage.rb:38:in `flush_writes' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/attachment.rb:144:in `save' from /Work/project/src/vendor/plugins/paperclip/lib/paperclip/attachment.rb:162:in `destroy' from /Work/project/src/app/models/user.rb:72:in `before_save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:347:in `send' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:347:in `callback' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/callbacks.rb:249:in `create_or_update' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:2538:in `save_without_validation' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/validations.rb:1078:in `save_without_dirty' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/dirty.rb:79:in `save_without_transactions' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:229:in `send' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:229:in `with_transaction_returning_status' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/database_statements.rb:136:in `transaction' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:182:in `transaction' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:228:in `with_transaction_returning_status' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:196:in `save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:208:in `rollback_active_record_state!' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/transactions.rb:196:in `save' from /usr/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/base.rb:723:in `create' I assume it has something to do with the avatar.dirty? value because when it certainly is true when this happens. The question is, how do I totally reset the thing if there are changes to be saved and abort avatar upload when the flag is set?

  Read the article

• ASP.NET MVC CookieTempDataProvider: any experience?

  - by Igor Brejc

  UPDATE: looks like I've misunderstood what TempData is for and what it isn't. It definitively shouldn't be used to "keep certain session-wide data" as I asked initially (see ASP.NET MVC TempData Is Really RedirectData why). I've modified the question accordingly. Has anyone used CookieTempDataProvider for TempData storage? Are there any caveats to watch out for (apart from keeping the session storage small)? Any issues with using it on Web farms?

  Read the article

• How to make per- http Request cache in ASP.NET 3.5

  - by Artem

  We using ASP.NET 3.5 (Controls-based apporach) and need to have storage specific for one http request only. Thread-specific cache with keys from session id won't work because threads are supposed to be pooled and therefore I have a chance to have data from some previous request in cache, which is undesireble in my case. I always need to have brand new storage for each request available through whole request. Any ideas how to do it in ASP.NET 3.5?

  Read the article

• Windows Azure role is state full or not

  - by taimoor-haider

  According to MSDN, an azure service can conatins any number of worker roles. According to my knowledge a worker role can be recycled at any time by Windows Azure Fabric. If it is the true, then: Worker role should be state less OR Worker role should persist its state to Windows Azure storage services. But i want to make a service which conatains client data and do not want to use Azure storage service. How I can accomplish this?

  Read the article

• Which is good Pratice storing a uploaded File in DB or storing it in Filesystem

  - by GayaMani

  hi I have a File Uploader in my ASP.NET application Using C#, we can upload any type like images, documents, pdf etc. I m storing it in the Filesystem and having only the Name of the File in DB. My doubt is can we store the entire file, images in DB. State me Which is good practice and why we need to use it. Either file System Storage or SQL DB Storage.

  Read the article

• How to bind to localStorage change event using jQuery for all browsers?

  - by David Glenn

  How do I bind a function to the HTML5 localStorage change event using jQuery? $(function () { $(window).bind('storage', function (e) { alert('storage changed'); }); localStorage.setItem('a', 'test'); }); I've tried the above but the alert is not showing. Update: It works in Firefox 3.6 but it doesn't work in Chrome 8 or IE 8 so the question should be more 'How to bind to localStorage change event using jQuery for all browsers?'

  Read the article

• Azure Diagnostics wrt Custom Logs and honoring scheduledTransferPeriod

  - by kjsteuer

  I have implemented my own TraceListener similar to http://blogs.technet.com/b/meamcs/archive/2013/05/23/diagnostics-of-cloud-services-custom-trace-listener.aspx . One thing I noticed is that that logs show up immediately in My Azure Table Storage. I wonder if this is expected with Custom Trace Listeners or because I am in a development environment. My diagnosics.wadcfg <?xml version="1.0" encoding="utf-8"?> <DiagnosticMonitorConfiguration configurationChangePollInterval="PT1M""overallQuotaInMB="4096" xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration"> <DiagnosticInfrastructureLogs scheduledTransferLogLevelFilter="Information" /> <Directories scheduledTransferPeriod="PT1M"> <IISLogs container="wad-iis-logfiles" /> <CrashDumps container="wad-crash-dumps" /> </Directories> <Logs bufferQuotaInMB="0" scheduledTransferPeriod="PT30M" scheduledTransferLogLevelFilter="Information" /> </DiagnosticMonitorConfiguration> I have changed my approach a bit. Now I am defining in the web config of my webrole. I notice when I set autoflush to true in the webconfig, every thing works but scheduledTransferPeriod is not honored because the flush method pushes to the table storage. I would like to have scheduleTransferPeriod trigger the flush or trigger flush after a certain number of log entries like the buffer is full. Then I can also flush on server shutdown. Is there any method or event on the CustomTraceListener where I can listen to the scheduleTransferPeriod? <system.diagnostics> <!--http://msdn.microsoft.com/en-us/library/sk36c28t(v=vs.110).aspx By default autoflush is false. By default useGlobalLock is true. While we try to be threadsafe, we keep this default for now. Later if we would like to increase performance we can remove this. see http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.usegloballock(v=vs.110).aspx --> <trace> <listeners> <add name="TableTraceListener" type="Pos.Services.Implementation.TableTraceListener, Pos.Services.Implementation" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> I have modified the custom trace listener to the following: namespace Pos.Services.Implementation { class TableTraceListener : TraceListener { #region Fields //connection string for azure storage readonly string _connectionString; //Custom sql storage table for logs. //TODO put in config readonly string _diagnosticsTable; [ThreadStatic] static StringBuilder _messageBuffer; readonly object _initializationSection = new object(); bool _isInitialized; CloudTableClient _tableStorage; readonly object _traceLogAccess = new object(); readonly List<LogEntry> _traceLog = new List<LogEntry>(); #endregion #region Constructors public TableTraceListener() : base("TableTraceListener") { _connectionString = RoleEnvironment.GetConfigurationSettingValue("DiagConnection"); _diagnosticsTable = RoleEnvironment.GetConfigurationSettingValue("DiagTableName"); } #endregion #region Methods /// <summary> /// Flushes the entries to the storage table /// </summary> public override void Flush() { if (!_isInitialized) { lock (_initializationSection) { if (!_isInitialized) { Initialize(); } } } var context = _tableStorage.GetTableServiceContext(); context.MergeOption = MergeOption.AppendOnly; lock (_traceLogAccess) { _traceLog.ForEach(entry => context.AddObject(_diagnosticsTable, entry)); _traceLog.Clear(); } if (context.Entities.Count > 0) { context.BeginSaveChangesWithRetries(SaveChangesOptions.None, (ar) => context.EndSaveChangesWithRetries(ar), null); } } /// <summary> /// Creates the storage table object. This class does not need to be locked because the caller is locked. /// </summary> private void Initialize() { var account = CloudStorageAccount.Parse(_connectionString); _tableStorage = account.CreateCloudTableClient(); _tableStorage.GetTableReference(_diagnosticsTable).CreateIfNotExists(); _isInitialized = true; } public override bool IsThreadSafe { get { return true; } } #region Trace and Write Methods /// <summary> /// Writes the message to a string buffer /// </summary> /// <param name="message">the Message</param> public override void Write(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.Append(message); } /// <summary> /// Writes the message with a line breaker to a string buffer /// </summary> /// <param name="message"></param> public override void WriteLine(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.AppendLine(message); } /// <summary> /// Appends the trace information and message /// </summary> /// <param name="eventCache">the Event Cache</param> /// <param name="source">the Source</param> /// <param name="eventType">the Event Type</param> /// <param name="id">the Id</param> /// <param name="message">the Message</param> public override void TraceEvent(TraceEventCache eventCache, string source, TraceEventType eventType, int id, string message) { base.TraceEvent(eventCache, source, eventType, id, message); AppendEntry(id, eventType, eventCache); } /// <summary> /// Adds the trace information to a collection of LogEntry objects /// </summary> /// <param name="id">the Id</param> /// <param name="eventType">the Event Type</param> /// <param name="eventCache">the EventCache</param> private void AppendEntry(int id, TraceEventType eventType, TraceEventCache eventCache) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); var message = _messageBuffer.ToString(); _messageBuffer.Length = 0; if (message.EndsWith(Environment.NewLine)) message = message.Substring(0, message.Length - Environment.NewLine.Length); if (message.Length == 0) return; var entry = new LogEntry() { PartitionKey = string.Format("{0:D10}", eventCache.Timestamp >> 30), RowKey = string.Format("{0:D19}", eventCache.Timestamp), EventTickCount = eventCache.Timestamp, Level = (int)eventType, EventId = id, Pid = eventCache.ProcessId, Tid = eventCache.ThreadId, Message = message }; lock (_traceLogAccess) _traceLog.Add(entry); } #endregion #endregion } }

  Read the article

• Translate Linq Expression to any existing Query structure?

  - by fredlegrain

  I have some kind of "data engine" between multiple "data consumer" processes and multiple "data storage" sources. I'd like to provide Linq capabilities to the "data consumer" and forward the query to the "data storage". The forwarded query should be some structured query (like, let's say, NHibernate Criteria). Is there any existing structured query library that could allow me to "just" translate a Linq Expression to such a structured query?

  Read the article

• How do i know if a mysql table is using myISAM or InnoDB Engine

  - by kamal

  I want to confirm if the statement below is indeed true: There is no way to specify a storage engine for a certain database, only for single tables, You can, however, specify a storage engine to be used during one session with: SET storage_engine=InnoDB; so you don't have to specify it for each table. How do i confirm, if indeed all the tables are using InnoDB All the tables were using myISAM.

  Read the article

• empty base class optimization

  - by FredOverflow

  Two quotes from the C++ standard, §1.8: An object is a region of storage. Base class subobjects may have zero size. I don't think a region of storage can be of size zero. That would mean that some base class subobjects aren't actually objects. Opinions?

  Read the article

• Trying to get around this Webservice call from Android using AsycTask

  - by Kevin Rave

  I am a fairly beginner in Android Development. I am developing an application that extensively relays on Webservice calls. First screen takes username and password and validates the user by calling the Webservice. If U/P is valid, then I need to fire up the 2nd activity. In that 2nd activity, I need to do 3 calls. But I haven't gotten to the 2nd part yet. In fact, I haven't completed the full coding yet. But I wanted to test if the app is working as far as I've come through. When calling webserivce, I am showing alert dialog. But the app is crashing somewhere. The LoginActivity shows up. When I enter U/P and press Login Button, it crashes. My classes: TaskHandler.java public class TaskHandler { private String URL; private User userObj; private String results; private JSONDownloaderTask task; ; public TaskHandler( String url, User user) { this.URL = url; this.userObj = user; } public String handleTask() { Log.d("Two", "In the function"); task = new JSONDownloaderTask(); Log.d("Three", "In the function"); task.execute(URL); return results; } private class JSONDownloaderTask extends AsyncTask<String, Void, String> { private String username;// = userObj.getUsername(); private String password; //= userObj.getPassword(); public HttpStatus status_code; public JSONDownloaderTask() { Log.d("con", "Success"); this.username = userObj.getUsername(); this.password = userObj.getPassword(); Log.d("User" + this.username , " Pass" + this.password); } private AsyncProgressActivity progressbar = new AsyncProgressActivity(); @Override protected void onPreExecute() { progressbar.showLoadingProgressDialog(); } @Override protected String doInBackground(String... params) { final String url = params[0]; //getString(R.string.api_staging_uri) + "Authenticate/"; // Populate the HTTP Basic Authentitcation header with the username and password HttpAuthentication authHeader = new HttpBasicAuthentication(username, password); HttpHeaders requestHeaders = new HttpHeaders(); requestHeaders.setAuthorization(authHeader); requestHeaders.setAccept(Collections.singletonList(MediaType.APPLICATION_JSON)); // Create a new RestTemplate instance RestTemplate restTemplate = new RestTemplate(); restTemplate.getMessageConverters().add(new MappingJacksonHttpMessageConverter()); try { // Make the network request Log.d(this.getClass().getName(), url); ResponseEntity<Message> response = restTemplate.exchange(url, HttpMethod.GET, new HttpEntity<Object>(requestHeaders), Message.class); status_code = response.getStatusCode(); return response.getBody().toString(); } catch (HttpClientErrorException e) { status_code = e.getStatusCode(); return new Message(0, e.getStatusText(), e.getLocalizedMessage(), "error").toString(); } catch ( Exception e ) { Log.d(this.getClass().getName() ,e.getLocalizedMessage()); return "Unknown Exception"; } } @Override protected void onPostExecute(String result) { progressbar.dismissProgressDialog(); switch ( status_code ) { case UNAUTHORIZED: result = "Invalid username or passowrd"; break; case ACCEPTED: result = "Invalid username or passowrd" + status_code; break; case OK: result = "Successful!"; break; } } } } AsycProgressActivity.java public class AsyncProgressActivity extends Activity { protected static final String TAG = AsyncProgressActivity.class.getSimpleName(); private ProgressDialog progressDialog; private boolean destroyed = false; @Override protected void onDestroy() { super.onDestroy(); destroyed = true; } public void showLoadingProgressDialog() { Log.d("Here", "Progress"); this.showProgressDialog("Authenticating..."); Log.d("Here", "afer p"); } public void showProgressDialog(CharSequence message) { Log.d("Here", "Message"); if (progressDialog == null) { progressDialog = new ProgressDialog(this); progressDialog.setIndeterminate(true); } Log.d("Here", "Message 2"); progressDialog.setMessage(message); progressDialog.show(); } public void dismissProgressDialog() { if (progressDialog != null && !destroyed) { progressDialog.dismiss(); } } } LoginActivity.java public class LoginActivity extends AsyncProgressActivity implements OnClickListener { Button login_button; HttpStatus status_code; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //this.requestWindowFeature(Window.FEATURE_NO_TITLE); setContentView(R.layout.main); login_button = (Button) findViewById(R.id.btnLogin); login_button.setOnClickListener(this); ViewServer.get(this).addWindow(this); } public void onDestroy() { super.onDestroy(); ViewServer.get(this).removeWindow(this); } public void onResume() { super.onResume(); ViewServer.get(this).setFocusedWindow(this); } public void onClick(View v) { if ( v.getId() == R.id.btnLogin ) { User userobj = new User(); String result; userobj.setUsername( ((EditText) findViewById(R.id.username)).getText().toString()); userobj.setPassword(((EditText) findViewById(R.id.password)).getText().toString() ); TaskHandler handler = new TaskHandler(getString(R.string.api_staging_uri) + "Authenticate/", userobj); Log.d(this.getClass().getName(), "One"); result = handler.handleTask(); Log.d(this.getClass().getName(), "After two"); Utilities.showAlert(result, LoginActivity.this); } } Utilities.java public class Utilities { public static void showAlert(String message, Context context) { AlertDialog.Builder alertDialogBuilder = new AlertDialog.Builder(context); alertDialogBuilder.setTitle("Login"); alertDialogBuilder.setMessage(message) .setCancelable(false) .setPositiveButton("OK",new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog,int id) { dialog.dismiss(); //dialog.cancel(); } }); alertDialogBuilder.setIcon(drawable.ic_dialog_alert); // create alert dialog AlertDialog alertDialog = alertDialogBuilder.create(); // show it alertDialog.show(); } }

  Read the article

• Session is working in Localhost Properly but not Online (Cpanel)

  - by nando pandi

  Hello guys Sorry for my stupid question regarding to my yesterday question its not solved yet even the advice you have given but still not working. i have removed all of spaces but still showing the problem for me. it's working perfect in localhost but not in CPANEL. Here is the errors which give: Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 1 Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 1 Warning: Cannot modify header information - headers already sent by (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 13 Warning: Unknown: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in Unknown on line 0 ANY ONE PLEASE ??? Here is my code: <?php session_start(); require_once('../../Admin Panel/db.php'); if(isset($_POST['email']) && !empty($_POST['email']) && isset($_POST['password']) && !empty($_POST['password'])) { $email = $_POST['email']; $password = $_POST['password']; $query="SELECT RemoteEmployeeFullName, RemoteEmployeeEmail, RemoteEmployeePassword FROM remoteemployees WHERE RemoteEmployeeEmail='".$email."' AND RemoteEmployeePassword='".$password."'"; $queryrun=$connection->query($query); if($queryrun->num_rows > 0) { $_SESSION['email']=$RemoteEmployeeFullName; header("Location: /home/scalepro/public_html/Admin Panel/Remote Employee/REPLists.php"); } else { echo 'Email: <b>'.$email. '</b> or Password <b>'. $password.'</b> Is Not Typed Correctly Try Again Please!.'; header( "refresh:5;url= /home/scalepro/public_html/spd/myaccount.php" ); } } else { header( "refresh:5;url= /home/scalepro/public_html/spd/myaccount.php" ); } ?> if the condition gets true this will be redirected to a page by the name of REPLists.php here is the page. <?php session_start(); require_once('../../Admin Panel/db.php'); ?> <html> <head> <style> .wrapper { width:1250px; height:auto; border:solid 1px #000; margin:0 auto; padding:5px; border-radius:5px; -webkit-border-radius:5px; -moz-border-radius:5px; -ms-border-radius:5px; } .wrapper .header { width:1250px; height:20px; border-bottom:solid 1px #f0eeee; margin:auto 0; margin-bottom:12px; } .wrapper .header div { text-decoration:none; color:#F60; } .wrapper .header div a { text-decoration:none; color:#F60; } .wrapper .Labelcon { width:1250px; height:29px; border-bottom:solid 1px #ccc; } .wrapper .Labelcon .Label { width:125px; height:20px; float:left; text-align:center; border-left:1px solid #f0eeee; font:Verdana, Geneva, sans-serif; font-size:14.3px; font-weight:bold; } .wrapper .Valuecon { width:1250px; height:29px; border-bottom:solid 1px #ccc; color:#F60; text-decoration:none; } .wrapper .Valuecon .Value { width:125px; height:20px; float:left; text-align:center; border-left:1px solid #f0eeee; font-size:14px; } </style> </head> <body> <div class="wrapper"> <div class="header"> <div style="float:left;"><font color="#000000">Email: </font> <?php if(isset($_SESSION['email'])) { echo $_SESSION['email']; } ?> </div> <div style="float:right;"> <a href="#">My Profile</a> | <a href="logout.php">Logout</a></div> </div> <div class="Labelcon"> <div class="Label">Property ID</div> <div class="Label">Property Type</div> <div class="Label">Property Deal Type</div> <div class="Label">Property Owner</div> <div class="Label">Proposted Price</div> </div> <?php if(!isset($_SESSION['email'])) { header('Location:../../spd/myaccount.php'); } else { $query = "SELECT properties.PropertyID, properties.PropertyType, properties.PropertyDealType, properties.Status, properties.PropostedPrice, remoteemployees.RemoteEmployeeFullName, propertyowners.PropertyOwnerName, propertydealers.PropertyDealerName FROM remoteemployees, propertyowners, propertydealers, properties WHERE properties.PropertyOwnerID=propertyowners.PropertyOwnerID AND properties.PropertyDealerID=propertydealers.PropertyDealerID AND remoteemployees.RemoteEmployeeID=properties.RemoteEmployeeID ORDER BY properties.PropertyID "; $query_run = $connection->query($query); if( $connection->error ) exit( $connection->error ); while($row=$query_run->fetch_assoc()) { ?> <div class="Valuecon"> <div class="Value"><?php echo $row['PropertyID'] ?></div> <div class="Value"><?php echo $row['PropertyType'] ?></div> <div class="Value"><?php echo $row['PropertyDealType']?></div> <div class="Value"><?php echo $row['PropertyOwnerName'] ?></div> <div class="Value"><?php echo $row['PropostedPrice'];?></div> </div> <?php } }?> </div> </body> </html>

  Read the article

• How to properly set URL rewrite rules for a php script to only accept POST

  - by stormist

  I have a rewrite rule for GET and POST: <LocationMatch "^/my/script/dir/?$"> RewriteEngine on RewriteCond %{REQUEST_METHOD} ^(HEAD|GET)$ RewriteRule .* /resources/scripts/storage/admin/list.php Script POST /resources/scripts/storage/admin/create.php </LocationMatch> How would I modify it to only allow POST?

  Read the article

• Installing openLDAP

  - by kourosh

  I have followed installing openLDAP from http://www.openldap.org/doc/admin24/quickstart.html and follow the tasks up to # 9. when I run [ su root -c /usr/local/libexec/slapd ] it asks for password and after I type the password no indication of if server has been started or not. When I run [ ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts ] I get this error [ ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) ] I can't figure it out what is the problem. Can anyone help? Thanks

  Read the article

• Set up basic Windows Authentication to connect to SQL Server 2008 from a small, trusted network

  - by Margaret

  I'm guessing that this is documented somewhere on Microsoft's site, but thus far I haven't found it. I'm trying to set up a Windows Server 2008 box to have SQL Server 2008 with Windows Authentication (Mixed Mode, actually, but anyway) for work. We have a number of client machines that will need access to the databases, and I would like to keep configuration as simple as feasible. Here's what I've done so far: Install SQL Server 2008 selecting Mixed Mode Create a new 'Standard' (rather than Administrator) Windows login entitled "UserLogin" (with intent to use it as the access account) Create an SQL Server Login for Server\UserLogin and assign it 'Windows Authentication' Log in as UserLogin, check that I'm able to connect to SQL Server using WIndows Authentication, then log out again Start on the first client (Windows XPSP2, SQL Server 2005): Run C:\WINDOWS\system32\rundll32.exe keymgr.dll, KRShowKeyMgr Click "Add", enter the server name in the box, Server\UserLogin in the Username, and UserLogin's password in the Password field. Click "Ok" then "Close" Attempt to access SQL Server 2005 using Windows authentication. Succeed. Confetti! Start on the second client (Windows 7, SQL Server 2008): Run C:\WINDOWS\system32\rundll32.exe keymgr.dll, KRShowKeyMgr Click "Add", enter the server name in the box, Server\UserLogin in the Username, and UserLogin's password in the Password field. Click "Ok" then "Close" Attempt to access SQL Server 2008 using Windows authentication. Receive an error "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" Assume that this translates to "You can't have two connections from the same account" (Yes, I know that doesn't make sense, but I'm a bit like that) Go back to the server, create a second Windows account, give it SQL Server rights. Go back to the second client, create a new passkey for the second login, try logging in again. Continue to receive the same error. Is this all overly complex and there's an easy way to do what I'm trying to accomplish? Or am I missing some ultra-obvious step that would make everything behave as desired? Most of the stuff that's coming up when I try to Google seems to be along the lines of "My ASP.NET application isn't working!", which obviously isn't all that much use.

  Read the article

• Can't connect to server using lftp

  - by Roland

  I have a lftp file that I want to execute using the following command lftp -f /usr/scripts/fileS.lftp If I run this file I get Delaying before reconnect: Now within this file (fileS.lftp) I have the following code open -u username,password server mput -E * close If I run open -u username,password server I get the following error Couldnt get a file descriptor referring to the console I assume I need to allow a connection on the server I'm trying to connect to, how can I do this? Any help would be highly appreciated.

  Read the article

• Installing OpenLDAP on Fedora 12: ldap_bind: Invalid credentials (49)

  - by Arcturus

  Hello. I've been trying to set up the OpenLDAP installed by default on Fedora 12, very unsuccessfully. My ultimate goal is to use LDAP authentication for user login and Apache, using the OpenLDAP server running on the same machine. The server is running, but the error I always get when I try to use ldapsearch or ldapadd is: ldap_bind: Invalid credentials (49) I've been following these tutorials, but none of them helped me: http://www.howtoforge.com/openldap_fedora7 http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-ldap-quickstart.html http://www.howtoforge.com/linux_ldap_authentication http://docs.fedoraproject.org/deployment-guide/f12/en-US/html/s1-ldap-pam.html http://www.openldap.org/doc/admin24/quickstart.html First, some components were already installed, and I installed these with yum: yum install openldap-servers openldap-devel Then, I created a basic slapd.conf file in /etc/openldap: database bdb suffix "dc=sniejana-sandbox,dc=com" rootdn "cn=root,dc=sniejana-sandbox,dc=com" rootpw {SSHA}cxdz55ygPu4T3ykg7dgu+L0VRvsFSeom directory /var/lib/ldap/sniejana-sandbox.com I obtained the rootpw with this command: slappasswd -s changeme I also created the /var/lib/ldap/sniejana-sandbox.com directory and made sure the entire contents of /var/lib/ldap were owned by the ldap user. I found two ldap.conf files, one in /etc and one in /etc/openldap. I don't know which is the right one. If I understood correctly, this file is to configure the client. I put this in both: HOST localhost BASE dc=sniejana-sandbox,dc=com I then ran the server with: service slapd start It said OK. Most of the tutorials above say to use the command ldapsearch -D "cn=Manager,dc=my-domain,dc=com" -W to ensure that everything's working. When I execute this command, a password prompt appears, and after entering the password, I get the error. ldapsearch -D "cn=root,dc=sniejana-sandbox,dc=com" -W Enter LDAP password: ldap_bind: Invalid credentials (49) The same thing happens when trying to use ldapadd. I tried with an encrypted and unencrypted password in slapd.conf, it doesn't change anything. Adding a -x for simple authentication doesn't change anything either. netstat -ap confirms the server is listening: tcp 0 0 *:ldap *:* LISTEN 4148/slapd tcp 0 0 *:ldap *:* LISTEN 4148/slapd ps -ef|grep slapd confirms the process is running: ldap 4148 1 0 15:22 ? 00:00:00 /usr/sbin/slapd -h ldap:/// -u ldap Running slaptest procudes config file testing succeeded. I read somewhere that the command ldapsearch -x -b '' -s base '(objectclass=*)' namingContext can confirm the server is running. It appears to work: # extended LDIF # # LDAPv3 # base <> with scope baseObject # filter: (objectclass=*) # requesting: namingContext # # dn: # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 I'm running out of ideas. Am I missing something obvious?

  Read the article

• AD LDS (ADAM) user not authenticate

  - by Hongwei

  I am trying to add a user to AD LDS (formerly known as ADAM). I added the user, set the password, and set the following properties: accountsExpires=(Never) msDS-UserAccountDisabled=FALSE msDS-UserDontExpirePassword=TRUE userPrincipalName=JUser I also added the user to Readers group. However, when I used ADSI Edit to bind to the directory with this user's credential, I got an error indicating invalid username or password. What else do I have to do for the user to authenticate? Thanks.

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >