Search Results

Search found 5380 results on 216 pages for 'primary'.

Page 190/216 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• Local dns for testing websites using mobile devices

  - by Morpheu5

  Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• Add Your Own Domain to Your WordPress.com Blog

  - by Matthew Guay

  Now that you’ve got a nice blog on WordPress.com, why not get your own domain to brand your site?  Here’s how you can easily register a new domain or move your existing domain to your WordPress site. By default, your free WordPress address is yourblog’sname.wordpress.com.  But whether this is a personal or a company blog, it can be nice to have your own domain to really brand your site and make it your own.  Or, if you already have another website and want to use WordPress as a blog for it, you could even add blog.yoursite.com or any other subdomain. Adding a domain to your WordPress.com is a paid upgrade; registering and mapping a new domain to your account costs $14.97 a year, while mapping a domain you already own to your WordPress blog costs $9.97 a year. Getting Started Login to your blog’s dashboard, click the arrow beside Upgrades in the sidebar, and select Domains. Enter the domain or subdomain you want to add to your site in the text box, and click Add domain to blog.   If you entered a new domain you want to register, WordPress will make sure the domain is available and then present you a registration form to register the domain.  Enter your information, and then click Register Domain.   Or, if you enter a domain that’s already registered, you will see the following prompt. If this domain is a domain you own, you can map it to WordPress.com.  Login to your domain registrar account and switch your nameserver to: NS1.WORDPRESS.COM NS2.WORDPRESS.COM NS3.WORDPRESS.COM Your DNS settings page for your domain may be different, depending on your registrar.  Here’s how our domain settings looked. Alternately, if you’re wanting to map a subdomain, such as blog.yoursite.com to your WordPress blog, create the following CNAME record on your domain register.  You may have to contact your domain registrar’s support to do this.  Substitute your subdomain, domain, and blog name when creating the record. subdomain.yourdomain.com. IN CNAME yourblog.wordpress.com. Once your settings are correct, click Try Again in your WordPress dashboard.  The DNS settings may take a while to update, but once WordPress can tell your DNS settings point to it, you will see the following confirmation screen.  Click Map Domain to add this domain to your WordPress blog. Now you’re ready to pay for your domain mapping or registration.  Depending on your purchase, the information and price shown may be different.  Here we’re mapping a domain we already have registered, so it costs $9.97.  Select your method of payment, enter your payment information or signin with your Paypal account, and continue as usual. Once your purchase is finished, you’ll be returned to the Domains page on WordPress.  Try going to your new domain, and make sure it opens your blog.  If it works, then click the bullet beside the new domain, and click Update Primary Domain.  Now, when people visit your WordPress site, they’ll see your new domain in the address bar.  You can still access your blog from your old yourname.wordpress.com address, but it will redirect to you new domain. Conclusion Having a personalized domain is a great way to make your blog more professional, while still taking advantage of the ease of use that WordPress.com offers.  And, if you have your own domain, you can easily move to your site traffic to a different hosting provider in the future if you need to.  The process is slightly complicated, but for $15/year we found this one of the best upgrades you could do to your WordPress.com blog. If you want to see an example of a site created with Wordpress, check out Matthew’s tech site techinch.com. And, if you’re just getting started with WordPress, check out our series on how to Start your WordPress.com blog, Personalize it, and Easily Post Content to it from anywhere. Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareHow To Start Your Own Professional Blog with WordPressDisable Logon to Windows Computers When Not Connected to a DomainMake a Backup Copy of your Production Wordpress Blog on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

  Read the article

• Secure wipe of a hard drive using WinPE.

  - by Derek Meier

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial.  There are tons of applications out there that will do it for you.  Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable.  Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)?  Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence.  But, we’re dealing with tinfoil hat wearing types here people.  DOD standards dictate at least 3 passes, and typically 7 is the preferred amount.  I’m not going to argue about data recovery.  I have been told to use 7 passes, and so I will.  So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data.  I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD.  Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc.  However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date.  I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx  It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you.  I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!!  My wife loves talking about WinPE almost as much as talking about Doctor Who.  Wait, did I say loves?  Hmmmm, I may have meant loathes. The topic at hand?  Right. Wiping a drive! I must have drunk too much coffee this morning.  I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat:   @echo off echo. echo     I will completely wipe the local hard drives using echo     7 individual wipes. The data will NOT echo     be recoverable.  I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment.  The clean command will overwrite the master boot record and any hidden sector information – so be careful!   sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001   With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible!  I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

  Read the article

• C# 5 Async, Part 1: Simplifying Asynchrony – That for which we await

  - by Reed

  Today’s announcement at PDC of the future directions C# is taking excite me greatly.  The new Visual Studio Async CTP is amazing.  Asynchronous code – code which frustrates and demoralizes even the most advanced of developers, is taking a huge leap forward in terms of usability.  This is handled by building on the Task functionality in .NET 4, as well as the addition of two new keywords being added to the C# language: async and await. This core of the new asynchronous functionality is built upon three key features.  First is the Task functionality in .NET 4, and based on Task and Task<TResult>.  While Task was intended to be the primary means of asynchronous programming with .NET 4, the .NET Framework was still based mainly on the Asynchronous Pattern and the Event-based Asynchronous Pattern. The .NET Framework added functionality and guidance for wrapping existing APIs into a Task based API, but the framework itself didn’t really adopt Task or Task<TResult> in any meaningful way.  The CTP shows that, going forward, this is changing. One of the three key new features coming in C# is actually a .NET Framework feature.  Nearly every asynchronous API in the .NET Framework has been wrapped into a new, Task-based method calls.  In the CTP, this is done via as external assembly (AsyncCtpLibrary.dll) which uses Extension Methods to wrap the existing APIs.  However, going forward, this will be handled directly within the Framework.  This will have a unifying effect throughout the .NET Framework.  This is the first building block of the new features for asynchronous programming: Going forward, all asynchronous operations will work via a method that returns Task or Task<TResult> The second key feature is the new async contextual keyword being added to the language.  The async keyword is used to declare an asynchronous function, which is a method that either returns void, a Task, or a Task<T>. Inside the asynchronous function, there must be at least one await expression.  This is a new C# keyword (await) that is used to automatically take a series of statements and break it up to potentially use discontinuous evaluation.  This is done by using await on any expression that evaluates to a Task or Task<T>. For example, suppose we want to download a webpage as a string.  There is a new method added to WebClient: Task<string> WebClient.DownloadStringTaskAsync(Uri).  Since this returns a Task<string> we can use it within an asynchronous function.  Suppose, for example, that we wanted to do something similar to my asynchronous Task example – download a web page asynchronously and check to see if it supports XHTML 1.0, then report this into a TextBox.  This could be done like so: private async void button1_Click(object sender, RoutedEventArgs e) { string url = "http://reedcopsey.com"; string content = await new WebClient().DownloadStringTaskAsync(url); this.textBox1.Text = string.Format("Page {0} supports XHTML 1.0: {1}", url, content.Contains("XHTML 1.0")); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Let’s walk through what’s happening here, step by step.  By adding the async contextual keyword to the method definition, we are able to use the await keyword on our WebClient.DownloadStringTaskAsync method call. When the user clicks this button, the new method (Task<string> WebClient.DownloadStringTaskAsync(string)) is called, which returns a Task<string>.  By adding the await keyword, the runtime will call this method that returns Task<string>, and execution will return to the caller at this point.  This means that our UI is not blocked while the webpage is downloaded.  Instead, the UI thread will “await” at this point, and let the WebClient do it’s thing asynchronously. When the WebClient finishes downloading the string, the user interface’s synchronization context will automatically be used to “pick up” where it left off, and the Task<string> returned from DownloadStringTaskAsync is automatically unwrapped and set into the content variable.  At this point, we can use that and set our text box content. There are a couple of key points here: Asynchronous functions are declared with the async keyword, and contain one or more await expressions In addition to the obvious benefits of shorter, simpler code – there are some subtle but tremendous benefits in this approach.  When the execution of this asynchronous function continues after the first await statement, the initial synchronization context is used to continue the execution of this function.  That means that we don’t have to explicitly marshal the call that sets textbox1.Text back to the UI thread – it’s handled automatically by the language and framework!  Exception handling around asynchronous method calls also just works. I’d recommend every C# developer take a look at the documentation on the new Asynchronous Programming for C# and Visual Basic page, download the Visual Studio Async CTP, and try it out.

  Read the article

• SSAS: Using fake dimension and scopes for dynamic ranges

  - by DigiMortal

  In one of my BI projects I needed to find count of objects in income range. Usual solution with range dimension was useless because range where object belongs changes in time. These ranges depend on calculation that is done over incomes measure so I had really no option to use some classic solution. Thanks to SSAS forums I got my problem solved and here is the solution. The problem – how to create dynamic ranges? I have two dimensions in SSAS cube: one for invoices related to objects rent and the other for objects. There is measure that sums invoice totals and two calculations. One of these calculations performs some computations based on object income and some other object attributes. Second calculation uses first one to define income ranges where object belongs. What I need is query that returns me how much objects there are in each group. I cannot use dimension for range because on one date object may belong to one range and two days later to another income range. By example, if object is not rented out for two days it makes no money and it’s income stays the same as before. If object is rented out after two days it makes some income and this income may move it to another income range. Solution – fake dimension and scopes Thanks to Gerhard Brueckl from pmOne I got everything work fine after some struggling with BI Studio. The original discussion he pointed out can be found from SSAS official forums thread Create a banding dimension that groups by a calculated measure. Solution was pretty simple by nature – we have to define fake dimension for our range and use scopes to assign values for object count measure. Object count measure is primitive – it just counts objects and that’s it. We will use it to find out how many objects belong to one or another range. We also need table for fake ranges and we have to fill it with ranges used in ranges calculation. After creating the table and filling it with ranges we can add fake range dimension to our cube. Let’s see now how to solve the problem step-by-step. Solving the problem Suppose you have ranges calculation defined like this: CASE WHEN [Measures].[ComplexCalc] < 0 THEN 'Below 0'WHEN [Measures].[ComplexCalc] >=0 AND  [Measures].[ComplexCalc] <=50 THEN '0 - 50'...END Let’s create now new table to our analysis database and name it as FakeIncomeRange. Here is the definition for table: CREATE TABLE [FakeIncomeRange] (     [range_id] [int] IDENTITY(1,1) NOT NULL,     [range_name] [nvarchar](50) NOT NULL,     CONSTRAINT [pk_fake_income_range] PRIMARY KEY CLUSTERED      (         [range_id] ASC     ) ) Don’t forget to fill this table with range labels you are using in ranges calculation. To use ranges from table we have to add this table to our data source view and create new dimension. We cannot bind this table to other tables but we have to leave it like it is. Our dimension has two attributes: ID and Name. The next thing to create is calculation that returns objects count. This calculation is also fake because we override it’s values for all ranges later. Objects count measure can be defined as calculation like this: COUNT([Object].[Object].[Object].members) Now comes the most crucial part of our solution – defining the scopes. Based on data used in this posting we have to define scope for each of our ranges. Here is the example for first range. SCOPE([FakeIncomeRange].[Name].&[Below 0], [Measures].[ObjectCount])     This=COUNT(            FILTER(                [Object].[Object].[Object].members,                 [Measures].[ComplexCalc] < 0          )     ) END SCOPE To get these scopes defined in cube we need MDX script blocks for each line given here. Take a look at the screenshot to get better idea what I mean. This example is given from SQL Server books online to avoid conflicts with NDA. :) From previous example the lines (MDX scripts) are: Line starting with SCOPE Block for This = Line with END SCOPE And now it is time to deploy and process our cube. Although you may see examples where there are semicolons in the end of statements you don’t need them. Visual Studio BI tools generate separate command from each script block so you don’t need to worry about it.

  Read the article

• MySQL 5.5 brings in new ways to authenticate users

  - by Georgi Kodinov

  Ever wanted to use your server's OS for authenticating MySQL users ? Or the corporate LDAP repository ? Unfortunately options like the above are plentiful nowadays. And providing hard-coded support for protocol X or service Y is not the best possible idea. MySQL 5.5 has taken the step into the right direction by providing an infrastructure allowing one to make the server understand different authentication protocols by creating a set of simple plugins (one for the client and one for the server). So now you can easily extend MySQL to search for and authenticate users in your favorite user directory. In fact the API supplied is so versatile that we took the possibility to re-design the current "native" authentication mechanism into a built-in always-on plugin ! OK, let me give you an example: Imagine we have a bunch of users defined in your OS, e.g. we have a user joro with his respective password. And we have a MySQL instance running on the same computer. It would not be unexpected to need to let joro access and/or modify MySQL data. The first step is to define him as a MySQL user. And there's a problem right there : MySQL's CREATE USER joro@localhost IDENTIFIED BY 'joros_password' statement needs a password. And this is a password in no way related to the password that joro have set up in the OS. What's worse : if joro changes his OS password this will in no way be reflected in MySQL. So he'll need to change his MySQL password in a separate step. Not very convenient, specially when you have a lot of users. This is a laborious setup for joro's DBA as well : he'll have to disable his access in both MySQL and the OS should he decides that joro's out of the "nice" list. Now mysql 5.5 to the rescue: Imagine that the smart DBA has created a MySQL server plugin that will check if the name of the user logging in is a valid and enabled OS name and if the password supplied to the mysql client matches the OS and has called this plugin 'auth_os'. Now all that's left to do is to define joro as a MySQL user that will be authenticated externally. This is done by the following command : CREATE USER 'joro'@'localhost' IDENTIFIED WITH 'auth_os'; Now joro can login to MySQL using his current OS password. Note : joro is still a valid MySQL user, so you can grant privileges to him just like you would for all other users. What's better: you can have users that authenticate using different mechanisms in the same server. So you can e.g. safely experiment with external authentication for selected users while keeping your current user base operational. What happens under the hood when joro logs in ? The server will find out by the user definition that it needs to use a non-default authentication and will ask the client to "switch" to using the appropriate client-side plugin (if of course the client is not already using it). If the client can't do this (e.g. because it's an old client or doesn't have the necessary plugin available) the server will reject the login. Otherwise the server will let the server-side plugin decide (while possibly talking to the client side plugin and the OS user directory) if this is a valid login or not. If it is the login process will continue as usual, while if it's not the login will get rejected. There's a lot more that MySQL 5.5 can do for you than just the simple case above. Stay tuned for more advanced use cases like mapping groups of external users to a single MySQL user (so you won't have to have 1-to-1 mapping between your external user directory and your mysql user repository) or ways to control the process as a DBA. Or you can simply skip ahead and read the relevant topics from MySQL's excellent online documentation. Or take a look at the example plugins in plugin/auth. Or take a look at the test suite in mysql-test/t/plugin_auth.test. Changelog entry: http://dev.mysql.com/doc/refman/5.5/en/news-5-5-7.html Primary new sections: Pluggable authentication Proxy users Client plugin C API functions Revised sections: New PROXY privilege New proxies_priv grant table Passwords might be external New external_user and proxy_user system variables New --default-auth and --plugin-dir mysql options New MYSQL_DEFAULT_AUTH and MYSQL_PLUGIN_DIR options for mysql_options() CREATE USER has IDENTIFIED WITH clause to specify auth plugin GRANT has PROXY privilege, IDENTIFIED WITH clause to specify auth plugin The data structure for writing client plugins

  Read the article

• Database model for keeping track of likes/shares/comments on blog posts over time

  - by gage

  My goal is to keep track of the popular posts on different blog sites based on social network activity at any given time. The goal is not to simply get the most popular now, but instead find posts that are popular compared to other posts on the same blog. For example, I follow a tech blog, a sports blog, and a gossip blog. The tech blog gets waaay more readership than the other two blogs, so in raw numbers every post on the tech blog will always out number views on the other two. So lets say the average tech blog post gets 500 facebook likes and the other two get an average of 50 likes per post. Then when there is a sports blog post that has 200 fb likes and a gossip blog post with 300 while the tech blog posts today have 500 likes I want to highlight the sports and gossip blog posts (more likes than average vs tech blog with more # of likes but just average for the blog) The approach I am thinking of taking is to make an entry in a database for each blog post. Every x minutes (say every 15 minutes) I will check how many likes/shares/comments an entry has received on all the social networks (facebook, twitter, google+, linkeIn). So over time there will be a history of likes for each blog post, i.e post 1234 after 15 min: 10 fb likes, 4 tweets, 6 g+ after 30 min: 15 fb likes, 15 tweets, 10 g+ ... ... after 48 hours: 200 fb likes, 25 tweets, 15 g+ By keeping a history like this for each blog post I can know the average number of likes/shares/tweets at any give time interval. So for example the average number of fb likes for all blog posts 48hrs after posting is 50, and a particular post has 200 I can mark that as a popular post and feature/highlight it. A consideration in the design is to be able to easily query the values (likes/shares) for a specific time-frame, i.e. fb likes after 30min or tweets after 24 hrs in-order to compute averages with which to compare against (or should averages be stored in it's own table?) If this approach is flawed or could use improvement please let me know, but it is not my main question. My main question is what should a database scheme for storing this info look like? Assuming that the above approach is taken I am trying to figure out what a database schema for storing the likes over time would look like. I am brand new to databases, in doing some basic reading I see that it is advisable to make a 3NF database. I have come up with the following possible schema. Schema 1 DB Popular Posts Table: Post post_id ( primary key(pk) ) url title Table: Social Activity activity_id (pk) url (fk) type (i.e. facebook,twitter,g+) value timestamp This was my initial instinct (base on my very limited db knowledge). As far as I under stand this schema would be 3NF? I searched for designs of similar database model, and found this question on stackoverflow, http://stackoverflow.com/questions/11216080/data-structure-for-storing-height-and-weight-etc-over-time-for-multiple-users . The scenario in that question is similar (recording weight/height of users overtime). Taking the accepted answer for that question and applying it to my model results in something like: Schema 2 (same as above, but break down the social activity into 2 tables) DB Popular Posts Table: Post post_id (pk) url title Table: Social Measurement measurement_id (pk) post_id (fk) timestamp Table: Social stat stat_id (pk) measurement_id (fk) type (i.e. facebook,twitter,g+) value The advantage I see in schema 2 is that I will likely want to access all the values for a given time, i.e. when making a measurement at 30min after a post is published I will simultaneous check number of fb likes, fb shares, fb comments, tweets, g+, linkedIn. So with this schema it may be easier get get all stats for a measurement_id corresponding to a certain time, i.e. all social stats for post 1234 at time x. Another thought I had is since it doesn't make sense to compare number of fb likes with number of tweets or g+ shares, maybe it makes sense to separate each social measurement into it's own table? Schema 3 DB Popular Posts Table: Post post_id (pk) url title Table: fb_likes fb_like_id (pk) post_id (fk) timestamp value Table: fb_shares fb_shares_id (pk) post_id (fk) timestamp value Table: tweets tweets__id (pk) post_id (fk) timestamp value Table: google_plus google_plus_id (pk) post_id (fk) timestamp value As you can see I am generally lost/unsure of what approach to take. I'm sure this typical type of database problem (storing measurements overtime, i.e temperature statistic) that must have a common solution. Is there a design pattern/model for this, does it have a name? I tried searching for "database periodic data collection" or "database measurements over time" but didn't find anything specific. What would be an appropriate model to solve the needs of this problem?

  Read the article

• Comments on Comments

  - by Joe Mayo

  I almost tweeted a reply to Capar Kleijne's question about comments on Twitter, but realized that my opinion exceeded 140 characters. The following is based upon my experience with extremes and approaches that I find useful in code comments. There are a couple extremes that I've seen and reasons why people go the distance in each approach. The most common extreme is no comments in the code at all.  A few bad reasons why this happens is because a developer is in a hurry, sloppy, or is interested in job preservation. The unfortunate result is that the code is difficult to understand and hard to maintain. The drawbacks to no comments in code are a primary reason why teachers drill the need for commenting code into our heads.  This viewpoint assumes the lack of comments are bad because the code is bad, but there is another reason for not commenting that is gaining more popularity. I've heard/and read that code should be self documenting. Following this thought pattern, if code is well written with meaningful names, there should not be a reason for comments.  An addendum to this argument is that comments are often neglected and get out-of-date, but the code is what is kept up-to-date. Presumably, if code contained very good naming, it would be easy to maintain.  This is a noble perspective and I like the practice of meaningful naming of identifiers. However, I think it's also an extreme approach that doesn't cover important cases.  i.e. If an identifier is named badly (subjective differences in opinion) or not changed appropriately during maintenance, then the badly named identifier is no more useful than a stale comment. These were the two no-comment extremes, so let's look at the too many comments extreme. On a regular basis, I'll see cases where the code is over-commented; not nearly as often as the no-comment scenarios, but still prevalent.  These are examples of where every single line in the code is commented.  These comments make the code harder to read because they get in the way of the algorithm.  In most cases, the comments parrot what each line of code does.  If a developer understands the language, then most statements are immediately intuitive.  i.e. what use is it to say that I'm assigning foo to bar when it's clear what the code is doing. I think that over-commenting code is a waste of time that slows down initial development and maintenance.  Understandably, the developer's intentions are admirable because they've had it beaten into their heads that they must comment. However, I think it's an extreme and prefer a more moderate approach. I don't think the extremes do justice to code because each can make maintenance harder.  No comments on bad code is obviously a problem, but the other two extremes are subtle and require qualification to address properly. The problem I see with the code-as-documentation approach is that it doesn't lift the developer out of the algorithm to identify dependencies, intentions, and hacks. Any developer can read code and follow an algorithm, but they still need to know where it fits into the big picture of the application. Because of indirections with language features like interfaces, delegates, and virtual members, code can become complex.  Occasionally, it's useful to point out a nuance or reason why a piece of code is there. i.e. If you've building an app that communicates via HTTP, you'll have certain headers to include for the endpoint, and it could be useful to point out why the code for setting those header values is there and how they affect the application. An argument against this could be that you should extract that code into a separate method with a meaningful name to describe the scenario.  My problem with such an approach would be that your code base becomes even more difficult to navigate and work with because you have all of this extra code just to make the code more meaningful. My opinion is that a simple and well-stated comment stating the reasons and intention for the code is more natural and convenient to the initial developer and maintainer.  I just don't agree with the approach of going out of the way to avoid making a comment.  I'm also concerned that some developers would take this approach as an excuse to not comment their bad code. Another area where I like comments is on documentation comments.  Java has it and so does C# and VB.  It's convenient because we can build automated tools that extract these comments.  These extracted comments are often much better than no documentation at all.  The "go read the code" answer always doesn't fulfill the need for a quick summary of an API. To summarize, I think that the extremes of no comments and too many comments are less than desirable approaches. I prefer documentation comments to explain each class and member (API level) and code comments as necessary to supplement well-written code. Joe

  Read the article

• SQL SERVER – SSMS: Memory Usage By Memory Optimized Objects Report

  - by Pinal Dave

  At conferences and at speaking engagements at the local UG, there is one question that keeps on coming which I wish were never asked. The question around, “Why is SQL Server using up all the memory and not releasing even when idle?” Well, the answer can be long and with the release of SQL Server 2014, this got even more complicated. This release of SQL Server 2014 has the option of introducing In-Memory OLTP which is completely new concept and our dependency on memory has increased multifold. In reality, nothing much changes but we have memory optimized objects (Tables and Stored Procedures) additional which are residing completely in memory and improving performance. As a DBA, it is humanly impossible to get a hang of all the innovations and the new features introduced in the next version. So today’s blog is around the report added to SSMS which gives a high level view of this new feature addition. This reports is available only from SQL Server 2014 onwards because the feature was introduced in SQL Server 2014. Earlier versions of SQL Server Management Studio would not show the report in the list. If we try to launch the report on the database which is not having In-Memory File group defined, then we would see the message in report. To demonstrate, I have created new fresh database called MemoryOptimizedDB with no special file group. Here is the query used to identify whether a database has memory-optimized file group or not. SELECT TOP(1) 1 FROM sys.filegroups FG WHERE FG.[type] = 'FX' Once we add filegroup using below command, we would see different version of report. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILEGROUP [IMO_FG] CONTAINS MEMORY_OPTIMIZED_DATA GO The report is still empty because we have not defined any Memory Optimized table in the database.  Total allocated size is shown as 0 MB. Now, let’s add the folder location into the filegroup and also created few in-memory tables. We have used the nomenclature of IMO to denote “InMemory Optimized” objects. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILE ( NAME = N'MemoryOptimizedDB_IMO', FILENAME = N'E:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\MemoryOptimizedDB_IMO') TO FILEGROUP [IMO_FG] GO You may have to change the path based on your SQL Server configuration. Below is the script to create the table. USE MemoryOptimizedDB GO --Drop table if it already exists. IF OBJECT_ID('dbo.SQLAuthority','U') IS NOT NULL DROP TABLE dbo.SQLAuthority GO CREATE TABLE dbo.SQLAuthority ( ID INT IDENTITY NOT NULL, Name CHAR(500)  COLLATE Latin1_General_100_BIN2 NOT NULL DEFAULT 'Pinal', CONSTRAINT PK_SQLAuthority_ID PRIMARY KEY NONCLUSTERED (ID), INDEX hash_index_sample_memoryoptimizedtable_c2 HASH (Name) WITH (BUCKET_COUNT = 131072) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO As soon as above script is executed, table and index both are created. If we run the report again, we would see something like below. Notice that table memory is zero but index is using memory. This is due to the fact that hash index needs memory to manage the buckets created. So even if table is empty, index would consume memory. More about the internals of how In-Memory indexes and tables work will be reserved for future posts. Now, use below script to populate the table with 10000 rows INSERT INTO SQLAuthority VALUES (DEFAULT) GO 10000 Here is the same report after inserting 1000 rows into our InMemory table.    There are total three sections in the whole report. Total Memory consumed by In-Memory Objects Pie chart showing memory distribution based on type of consumer – table, index and system. Details of memory usage by each table. The information about all three is taken from one single DMV, sys.dm_db_xtp_table_memory_stats This DMV contains memory usage statistics for both user and system In-Memory tables. If we query the DMV and look at data, we can easily notice that the system tables have negative object IDs.  So, to look at user table memory usage, below is the over-simplified version of query. USE MemoryOptimizedDB GO SELECT OBJECT_NAME(OBJECT_ID), * FROM sys.dm_db_xtp_table_memory_stats WHERE OBJECT_ID > 0 GO This report would help DBA to identify which in-memory object taking lot of memory which can be used as a pointer for designing solution. I am sure in future we will discuss at lengths the whole concept of In-Memory tables in detail over this blog. To read more about In-Memory OLTP, have a look at In-Memory OLTP Series at Balmukund’s Blog. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Memory, SQL Reports

  Read the article

• To ORM or Not to ORM. That is the question&hellip;

  - by Patrick Liekhus

  UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

  Read the article

• &ldquo;My life at Oracle&rdquo;

  - by cristian.condurache(at)oracle.com

  Hello everybody! My name is Eva and I currently work in Oracle Italy as Sales Programs Manager for the Technology Sales organization. Since 2009, I also proudly represent the Oracle Education Foundation within my country as the Ambassador for Italy. My career path in this amazing company began 5 years ago as a fresh graduate: after various years studying abroad, in Germany and Ireland mainly, I was looking for a valuable and concrete opportunity which could fulfill my energetic spirit. I wanted to develop myself inside a stimulating and “fast” business environment.. and here came Oracle and I really couldn’t ask for anything better!  THE PARTNER EXPERIENCE The first department I had the chance to work into was the Alliances and Channels organization, where I had the opportunity to join a brilliant team of great and visionary guys. I began having the responsibility to analyze and rationalize the portfolio of Oracle business partners and to identify potential cross-area solutions, which had to be highlighted both on the local market and internationally: this ended up with the implementation of the “Partner Community” model, a business environment of selected Oracle partners, specialized on the different technology focus areas. This new concept was then recognized as an EMEA Best Practice and replicated internationally. Having the opportunity to strengthen day after day strategic relationships with several business partners and study the market positioning of their technology solutions, I was given the role to develop the “Oracle Partner Network Innovation Award” in Italy: the EMEA competition encouraging and rewarding proven and successful technology innovations, creating high value for our common customers and generating new business potential. Several Italian partner solutions won different prizes and I decided that it was worth collecting all those valuable projects, winners and short-listed, inside two specific books in order also to provide them an international market visibility: OPN Innovation Award Booklet 2007 and OPN Innovation Award Booklet 2008 Inside the Alliances and Channels department I really had the opportunity to do    amazing things, like for example working side-by-side with one of the most exceptional teams in Oracle I have ever worked with: the EMEA Recruitment Team. Together, in fact, we conceived a brand new business initiative for our partners, called “Oracle Campus Joint Program”. This program was awarded as an EMEA Best Practice and acknowledged by both Italian public institutions and press media. Italy   is currently running its 5th edition.   Briefly, the “Oracle Campus Joint Program” aims at facing the growing issue of lack of  technology competences and skills on the market. By identifying a specific technology area and developing an intensive 4-6 week Oracle University training course and by collaborating with important academic institutes, international “gurus” and professionals, our business partners are able to benefit from a pool of brilliant top talented young consultants and offer them a significant career opportunity. BUSINESS BUT NOT ONLY: THE NO-PROFIT EXPERIENCE OF ORACLE Currently my mission in Oracle is to continue driving the implementation of strategic business development and sales programs for the entire Oracle Technology stack, involving both partners and the end-customers. But as a completely distinguished role from the day-today business, I’m also honored to represent in Italy the charity global organization founded by Oracle - the Oracle Education Foundation - and drive its corporate citizenship and marketing programs. Oracle Education Foundation is an independent charitable organization funded by Oracle and is dedicated to helping students develop 21st century skills through project learning and the use of technology. It provides “ThinkQuest” as a free program to primary and secondary (K12) schools. Just some significant numbers: today 548,000 students/teachers in 47 countries use ThinkQuest and the Oracle Education Foundation partners with 40+ no-profit or government organizations globally. ABOUT MYSELF AND MY INTERESTS About myself…I’m very enthusiastic and positive, trying always to transform difficult issues in challenging opportunities. My day usually begins very early in the morning with running, swimming or when I need to collect some “zen” energies with a yoga session or better with a long walk with my dog. I definitely love animals and generally speaking I’m very keen on environmental issues and try, as much as I can, to carry out a healthy and “planet respectful” lifestyle. My thirst for knowledge pushed me some time ago to begin a new personal challenge: I decided to enroll, dedicating a good part of my free time, for a second university degree: I chose “Neuroeconomics”, an innovative academic path which combines psychology, economics, and neuroscience and studies how people make decisions and the role of the brain when people evaluate these decisions, categorizing risks and rewards and generally interacting with each other. I’ve been very glad to talk about my experience in this article, as working for Oracle is something very stimulating. This company ensures you the opportunity to face new challenges, work with highly talented people and be professionally highlighted also globally. Motivation, good results and innovation is always pursued, recognized and fully supported. Thanks and wish you all an amazing career! If you have any question please contact [email protected]. For our job opportunities, please look at http://campus.oracle.com.   Technorati Tags: EMEA,Oracle Partners,Oracle Campus,Oracle Education,experience,EMEA Recruitment Team

  Read the article

• SQL SERVER – Solution – Puzzle – Statistics are not Updated but are Created Once

  - by pinaldave

  Earlier I asked puzzle why statistics are not updated. Read the complete details over here: Statistics are not Updated but are Created Once In the question I have demonstrated even though statistics should have been updated after lots of insert in the table are not updated.(Read the details SQL SERVER – When are Statistics Updated – What triggers Statistics to Update) In this example I have created following situation: Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Auto Update Statistics and Auto Create Statistics for database is TRUE Now I have requested two things in the example 1) Why this is happening? 2) How to fix this issue? I have many answers – here is the how I fixed it which has resolved the issue for me. NOTE: There are multiple answers to this problem and I will do my best to list all. Solution: Create nonclustered Index on column City Here is the working example for the same. Let us understand this script and there is added explanation at the end. -- Execution Plans Difference -- Estimated Execution Plan Vs Actual Execution Plan -- Create Sample Database CREATE DATABASE SampleDB GO USE SampleDB GO -- Create Table CREATE TABLE ExecTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO CREATE NONCLUSTERED INDEX IX_ExecTable1 ON ExecTable (City); GO -- Insert One Thousand Records -- INSERT 1 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 1000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here DBCC SHOW_STATISTICS('ExecTable', IX_ExecTable1); GO -------------------------------------------------------------- -- Round 2 -- Insert One Thousand Records -- INSERT 2 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 1000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here DBCC SHOW_STATISTICS('ExecTable', IX_ExecTable1); GO -- Clean up Database DROP TABLE ExecTable GO When I created non clustered index on the column city, it also created statistics on the same column with same name as index. When we populate the data in the column the index is update – resulting execution plan to be invalided – this leads to the statistics to be updated in next execution of SELECT. This behavior does not happen on Heap or column where index is auto created. If you explicitly update the index, often you can see the statistics are updated as well. You can see this is for sure happening if you follow the tell of John Sansom. John Sansom‘s suggestion: That was fun! Although the column statistics are invalidated by the time the second select statement is executed, the query is not compiled/recompiled but instead the existing query plan is reused. It is the “next” compiled query against the column statistics that will see that they are out of date and will then in turn instantiate the action of updating statistics. You can see this in action by forcing the second statement to recompile. SELECT FirstName, LastName, City FROM ExecTable WHERE City = ‘New York’ option(RECOMPILE) GO Kevin Cross also have another suggestion: I agree with John. It is reusing the Execution Plan. Aside from OPTION(RECOMPILE), clearing the Execution Plan Cache before the subsequent tests will also work. i.e., run this before round 2: ————————————————————– – Clear execution plan cache before next test DBCC FREEPROCCACHE WITH NO_INFOMSGS; ————————————————————– Nice puzzle! Kevin As this was puzzle John and Kevin both got the correct answer, there was no condition for answer to be part of best practices. I know John and he is finest DBA around – his tremendous knowledge has always impressed me. John and Kevin both will agree that clearing cache either using DBCC FREEPROCCACHE and recompiling each query every time is for sure not good advice on production server. It is correct answer but not best practice. By the way, if you have better solution or have better suggestion please advise. I am open to change my answer and publish further improvement to this solution. On very separate note, I like to have clustered index on my Primary Key, which I have not mentioned here as it is out of the scope of this puzzle. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Index, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Statistics

  Read the article

• Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

  - by Lewis Benge

  One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

  Read the article

• Troubleshooting High-CPU Utilization for SQL Server

  - by Susantha Bathige

  The objective of this FAQ is to outline the basic steps in troubleshooting high CPU utilization on  a server hosting a SQL Server instance. The first and the most common step if you suspect high CPU utilization (or are alerted for it) is to login to the physical server and check the Windows Task Manager. The Performance tab will show the high utilization as shown below: Next, we need to determine which process is responsible for the high CPU consumption. The Processes tab of the Task Manager will show this information: Note that to see all processes you should select Show processes from all user. In this case, SQL Server (sqlserver.exe) is consuming 99% of the CPU (a normal benchmark for max CPU utilization is about 50-60%). Next we examine the scheduler data. Scheduler is a component of SQLOS which evenly distributes load amongst CPUs. The query below returns the important columns for CPU troubleshooting. Note – if your server is under severe stress and you are unable to login to SSMS, you can use another machine’s SSMS to login to the server through DAC – Dedicated Administrator Connection (see http://msdn.microsoft.com/en-us/library/ms189595.aspx for details on using DAC) SELECT scheduler_id ,cpu_id ,status ,runnable_tasks_count ,active_workers_count ,load_factor ,yield_count FROM sys.dm_os_schedulers WHERE scheduler_id See below for the BOL definitions for the above columns. scheduler_id – ID of the scheduler. All schedulers that are used to run regular queries have ID numbers less than 1048576. Those schedulers that have IDs greater than or equal to 1048576 are used internally by SQL Server, such as the dedicated administrator connection scheduler. cpu_id – ID of the CPU with which this scheduler is associated. status – Indicates the status of the scheduler. runnable_tasks_count – Number of workers, with tasks assigned to them that are waiting to be scheduled on the runnable queue. active_workers_count – Number of workers that are active. An active worker is never preemptive, must have an associated task, and is either running, runnable, or suspended. current_tasks_count - Number of current tasks that are associated with this scheduler. load_factor – Internal value that indicates the perceived load on this scheduler. yield_count – Internal value that is used to indicate progress on this scheduler.                                                                 Now to interpret the above data. There are four schedulers and each assigned to a different CPU. All the CPUs are ready to accept user queries as they all are ONLINE. There are 294 active tasks in the output as per the current_tasks_count column. This count indicates how many activities currently associated with the schedulers. When a  task is complete, this number is decremented. The 294 is quite a high figure and indicates all four schedulers are extremely busy. When a task is enqueued, the load_factor  value is incremented. This value is used to determine whether a new task should be put on this scheduler or another scheduler. The new task will be allocated to less loaded scheduler by SQLOS. The very high value of this column indicates all the schedulers have a high load. There are 268 runnable tasks which mean all these tasks are assigned a worker and waiting to be scheduled on the runnable queue.   The next step is  to identify which queries are demanding a lot of CPU time. The below query is useful for this purpose (note, in its current form,  it only shows the top 10 records). SELECT TOP 10 st.text  ,st.dbid  ,st.objectid  ,qs.total_worker_time  ,qs.last_worker_time  ,qp.query_plan FROM sys.dm_exec_query_stats qs CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st CROSS APPLY sys.dm_exec_query_plan(qs.plan_handle) qp ORDER BY qs.total_worker_time DESC This query as total_worker_time as the measure of CPU load and is in descending order of the  total_worker_time to show the most expensive queries and their plans at the top:      Note the BOL definitions for the important columns: total_worker_time - Total amount of CPU time, in microseconds, that was consumed by executions of this plan since it was compiled. last_worker_time - CPU time, in microseconds, that was consumed the last time the plan was executed.   I re-ran the same query again after few seconds and was returned the below output. After few seconds the SP dbo.TestProc1 is shown in fourth place and once again the last_worker_time is the highest. This means the procedure TestProc1 consumes a CPU time continuously each time it executes.      In this case, the primary cause for high CPU utilization was a stored procedure. You can view the execution plan by clicking on query_plan column to investigate why this is causing a high CPU load. I have used SQL Server 2008 (SP1) to test all the queries used in this article.

  Read the article

• Off The Beaten Path—Three Things Growing Midsize Companies are Thankful For

  - by Christine Randle

  By: Jim Lein, Senior Director, Oracle Accelerate Last Sunday I went on a walkabout.  That’s when I just step out the door of my Colorado home and hike through the mountains for hours with no predetermined destination. I favor “social trails”, the unmapped routes pioneered by both animal and human explorers.  These tracks  are usually more challenging than established, marked routes and you can’t be 100% sure of where you’re going to end up. But I’ve found the rewards to be much greater. For awhile, I pondered on how—depending upon your perspective—the current economic situation worldwide could be viewed as either a classic “the glass is half empty” or a “the glass is half full” scenario. Midsize companies buy Oracle to grow and so I’m continually amazed and fascinated by the success stories our customers relate to me.  Oracle’s successful midsize companies are growing via innovation, agility, and opportunity. For them, the glass isn’t half full—it’s overflowing. Growing Midsize Companies are Thankful for: Innovation The sun angling through the pine trees reminded me of a conversation with a European customer a year ago May.  You might not recognize the name but, chances are, your local evening weather report relies on this company’s weather observation, monitoring and measurement products.  For decades, the company was recognized in its industry for product innovation, but its recent rapid growth comes from tailoring end to end product and service solutions based on the needs of distinctly different customer groups across industrial, public sector, and defense sectors.  Hours after that phone call I was walking my dog in a local park and came upon a small white plastic box sprouting short antennas and dangling by a nylon cord from a tree branch.  I cut it down. The name of that customer’s company was stamped on the housing. “It’s a radiosonde from a high altitude weather balloon,” he told me the next day. “Keep it as a souvenir.”  It sits on my fireplace mantle and elicits many questions from guests. Growing Midsize Companies are Thankful for: Agility In July, I had another interesting discussion with the CFO of an Asia-Pacific company which owns and operates a large portfolio of leisure assets. They are best known for their epic outdoor theme parks. However, their primary growth today is coming from a chain of indoor amusement centers in the USA where billiards, bowling, and laser tag take the place of roller coasters, kiddy rides, and wave pools. With mountains and rivers right out my front door, I’m not much for theme parks, but I’ll take a spirited game of laser tag any day.  This company has grown dramatically since first implementing Oracle ERP more than a decade ago. Their profitable expansion into a completely foreign market is derived from the ability to replicate proven and efficient best business practices across diverse operating environments.  They recently went live on Oracle’s Fusion HCM and Taleo. Their CFO explained to me how, with thousands of employees in three countries, Fusion HCM and Taleo would enable them to remain incredibly agile by acting on trends linking individual employee performance to their management, establishing and maintaining those best practices. Growing Midsize Companies are Thankful for: Opportunity I have three GPS apps on my iPhone. I use them mainly to keep track of my stats—distance, time, and vertical gain. However, every once in awhile I need to find the most efficient route back home before dark from my current location (notice I didn’t use the word “lost”). In August I listened in on an interview with the CFO of another European company that designs and delivers telematics solutions—the integrated use of telecommunications and informatics—for managing the mobile workforce. These solutions enable customers to achieve evolutionary step-changes in their performance and service delivery. Forgive the overused metaphor, but this is route optimization on steroids.  The company’s executive team saw an opportunity in this emerging market and went “all in”. Consequently, they are being rewarded with tremendous growth results and market domination by providing the ability for their clients to collect and analyze performance information related to fuel consumption, service workforce safety, and asset productivity. This Thanksgiving, I’m thankful for health, family, friends, and a career with an innovative company that helps companies leverage top tier software to drive and manage growth. And I’m thankful to have learned the lesson that good things happen when you get off the beaten path—both when hiking and when forging new routes through a complex world economy. Halfway through my walkabout on Sunday, after scrambling up a long stretch of scree-covered hill, I crested a ridge with an obstructed view of 14,265 ft Mt Evans just a few miles to the west.  There, nowhere near a house or a trail, someone had placed a wooden lounge chair. Its wood was worn and faded but it was sturdy. I had lunch and a cold drink in my pack. Opportunity knocked and I seized it. Happy Thanksgiving.  

  Read the article

• RIDC Accelerator for Portal

  - by Stefan Krantz

  What is RIDC?Remote IntraDoc Client is a Java enabled API that leverages simple transportation protocols like Socket, HTTP and JAX/WS to execute content service operations in WebCenter Content Server. Each operation by design in the Content Server will execute stateless and return a complete result of the request. Each request object simply specifies the in a Map format (key and value pairs) what service to call and what parameters settings to apply. The result responded with will be built on the same Map format (key and value pairs). The possibilities with RIDC is endless since you can consume any available service (even custom made ones), RIDC can be executed from any Java SE application that has any WebCenter Content Services needs. WebCenter Portal and the example Accelerator RIDC adapter frameworkWebCenter Portal currently integrates and leverages WebCenter Content Services to enable available use cases in the portal today, like Content Presenter and Doc Lib. However the current use cases only covers few of the scenarios that the Content Server has to offer, in addition to the existing use cases it is not rare that the customer requirements requires additional steps and functionality that is provided by WebCenter Content but not part of the use cases from the WebCenter Portal.The good news to this is RIDC, the second good news is that WebCenter Portal already leverages the RIDC and has a connection management framework in place. The million dollar question here is how can I leverage this infrastructure for my custom use cases. Oracle A-Team has during its interactions produced a accelerator adapter framework that will reuse and leverage the existing connections provisioned in the webcenter portal application (works for WebCenter Spaces as well), as well as a very comprehensive design patter to minimize the work involved when exposing functionality. Let me introduce the RIDCCommon framework for accelerating WebCenter Content consumption from WebCenter Portal including Spaces. How do I get started?Through a few easy steps you will be on your way, Extract the zip file RIDCCommon.zip to the WebCenter Portal Application file structure (PortalApp) Open you Portal Application in JDeveloper (PS4/PS5) select to open the project in your application - this will add the project as a member of the application Update the Portal project dependencies to include the new RIDCCommon project Make sure that you WebCenter Content Server connection is marked as primary (a checkbox at the top of the connection properties form) You should by this stage have a similar structure in your JDeveloper Application Project Portal Project PortalWebAssets Project RIDCCommon Since the API is coming with some example operations that has already been exposed as DataControl actions, if you open Data Controls accordion you should see following: How do I implement my own operation? Create a new Java Class in for example com.oracle.ateam.portal.ridc.operation call it (GetDocInfoOperation) Extend the abstract class com.oracle.ateam.portal.ridc.operation.RIDCAbstractOperation and implement the interface com.oracle.ateam.portal.ridc.operation.IRIDCOperation The only method you actually are required to implement is execute(RIDCManager, IdcClient, IdcContext) The best practice to set object references for the operation is through the Constructor, example below public GetDocInfoOperation(String dDocName)By leveraging the constructor you can easily force the implementing class to pass right information, you can also overload the Constructor with more or less parameters as required Implement the execute method, the work you supposed to execute here is creating a new request binder and retrieve a response binder with the information in the request binder.In this case the dDocName for which we want the DocInfo Secondly you have to process the response binder by extracting the information you need from the request and restore this information in a simple POJO Java BeanIn the example below we do this in private void processResult(DataBinder responseData) - the new SearchDataObject is a Member of the GetDocInfoOperation so we can return this from a access method. Since the RIDCCommon API leverage template pattern for the operations you are now required to add a method that will enable access to the result after the execution of the operationIn the example below we added the method public SearchDataObject getDataObject() - this method returns the pre processed SearchDataObject from the execute method  This is it, as you can see on the code below you do not need more than 32 lines of very simple code 1: public class GetDocInfoOperation extends RIDCAbstractOperation implements IRIDCOperation { 2: private static final String DOC_INFO_BY_NAME = "DOC_INFO_BY_NAME"; 3: private String dDocName = null; 4: private SearchDataObject sdo = null; 5: 6: public GetDocInfoOperation(String dDocName) { 7: super(); 8: this.dDocName = dDocName; 9: } 10:   11: public boolean execute(RIDCManager manager, IdcClient client, 12: IdcContext userContext) throws Exception { 13: DataBinder dataBinder = createNewRequestBinder(DOC_INFO_BY_NAME); 14: dataBinder.putLocal(DocumentAttributeDef.NAME.getName(), dDocName); 15: 16: DataBinder responseData = getResponseBinder(dataBinder); 17: processResult(responseData); 18: return true; 19: } 20: 21: private void processResult(DataBinder responseData) { 22: DataResultSet rs = responseData.getResultSet("DOC_INFO"); 23: for(DataObject dobj : rs.getRows()) { 24: this.sdo = new SearchDataObject(dobj); 25: } 26: super.setMessage(responseData.getLocal(ATTR_MESSAGE)); 27: } 28: 29: public SearchDataObject getDataObject() { 30: return this.sdo; 31: } 32: } How do I execute my operation? In the previous section we described how to create a operation, so by now you should be ready to execute the operation Step one either add a method to the class  com.oracle.ateam.portal.datacontrol.ContentServicesDC or a class of your own choiceRemember the RIDCManager is a very light object and can be created where needed Create a method signature look like this public SearchDataObject getDocInfo(String dDocName) throws Exception In the method body - create a new instance of GetDocInfoOperation and meet the constructor requirements by passing the dDocNameGetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName) Execute the operation via the RIDCManager instance rMgr.executeOperation(docInfo) Return the result by accessing it from the executed operationreturn docInfo.getDataObject() 1: private RIDCManager rMgr = null; 2: private String lastOperationMessage = null; 3:   4: public ContentServicesDC() { 5: super(); 6: this.rMgr = new RIDCManager(); 7: } 8: .... 9: public SearchDataObject getDocInfo(String dDocName) throws Exception { 10: GetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName); 11: boolean boolVal = rMgr.executeOperation(docInfo); 12: lastOperationMessage = docInfo.getMessage(); 13: return docInfo.getDataObject(); 14: }   Get the binaries! The enclosed code in a example that can be used as a reference on how to consume and leverage similar use cases, user has to guarantee appropriate quality and support.  Download link: https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/RIDCCommon.zip RIDC API Referencehttp://docs.oracle.com/cd/E23943_01/apirefs.1111/e17274/toc.htm

  Read the article

• Big Data – Role of Cloud Computing in Big Data – Day 11 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the NewSQL. In this article we will understand the role of Cloud in Big Data Story What is Cloud? Cloud is the biggest buzzword around from last few years. Everyone knows about the Cloud and it is extremely well defined online. In this article we will discuss cloud in the context of the Big Data. Cloud computing is a method of providing a shared computing resources to the application which requires dynamic resources. These resources include applications, computing, storage, networking, development and various deployment platforms. The fundamentals of the cloud computing are that it shares pretty much share all the resources and deliver to end users as a service.  Examples of the Cloud Computing and Big Data are Google and Amazon.com. Both have fantastic Big Data offering with the help of the cloud. We will discuss this later in this blog post. There are two different Cloud Deployment Models: 1) The Public Cloud and 2) The Private Cloud Public Cloud Public Cloud is the cloud infrastructure build by commercial providers (Amazon, Rackspace etc.) creates a highly scalable data center that hides the complex infrastructure from the consumer and provides various services. Private Cloud Private Cloud is the cloud infrastructure build by a single organization where they are managing highly scalable data center internally. Here is the quick comparison between Public Cloud and Private Cloud from Wikipedia:   Public Cloud Private Cloud Initial cost Typically zero Typically high Running cost Unpredictable Unpredictable Customization Impossible Possible Privacy No (Host has access to the data Yes Single sign-on Impossible Possible Scaling up Easy while within defined limits Laborious but no limits Hybrid Cloud Hybrid Cloud is the cloud infrastructure build with the composition of two or more clouds like public and private cloud. Hybrid cloud gives best of the both the world as it combines multiple cloud deployment models together. Cloud and Big Data – Common Characteristics There are many characteristics of the Cloud Architecture and Cloud Computing which are also essentially important for Big Data as well. They highly overlap and at many places it just makes sense to use the power of both the architecture and build a highly scalable framework. Here is the list of all the characteristics of cloud computing important in Big Data Scalability Elasticity Ad-hoc Resource Pooling Low Cost to Setup Infastructure Pay on Use or Pay as you Go Highly Available Leading Big Data Cloud Providers There are many players in Big Data Cloud but we will list a few of the known players in this list. Amazon Amazon is arguably the most popular Infrastructure as a Service (IaaS) provider. The history of how Amazon started in this business is very interesting. They started out with a massive infrastructure to support their own business. Gradually they figured out that their own resources are underutilized most of the time. They decided to get the maximum out of the resources they have and hence  they launched their Amazon Elastic Compute Cloud (Amazon EC2) service in 2006. Their products have evolved a lot recently and now it is one of their primary business besides their retail selling. Amazon also offers Big Data services understand Amazon Web Services. Here is the list of the included services: Amazon Elastic MapReduce – It processes very high volumes of data Amazon DynammoDB – It is fully managed NoSQL (Not Only SQL) database service Amazon Simple Storage Services (S3) – A web-scale service designed to store and accommodate any amount of data Amazon High Performance Computing – It provides low-tenancy tuned high performance computing cluster Amazon RedShift – It is petabyte scale data warehousing service Google Though Google is known for Search Engine, we all know that it is much more than that. Google Compute Engine – It offers secure, flexible computing from energy efficient data centers Google Big Query – It allows SQL-like queries to run against large datasets Google Prediction API – It is a cloud based machine learning tool Other Players Besides Amazon and Google we also have other players in the Big Data market as well. Microsoft is also attempting Big Data with the Cloud with Microsoft Azure. Additionally Rackspace and NASA together have initiated OpenStack. The goal of Openstack is to provide a massively scaled, multitenant cloud that can run on any hardware. Thing to Watch The cloud based solutions provides a great integration with the Big Data’s story as well it is very economical to implement as well. However, there are few things one should be very careful when deploying Big Data on cloud solutions. Here is a list of a few things to watch: Data Integrity Initial Cost Recurring Cost Performance Data Access Security Location Compliance Every company have different approaches to Big Data and have different rules and regulations. Based on various factors, one can implement their own custom Big Data solution on a cloud. Tomorrow In tomorrow’s blog post we will discuss about various Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

  - by Brian Schroer

  Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O.    Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.  Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers.  Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

  Read the article

• Integrate Microsoft Translator into your ASP.Net application

  - by sreejukg

  In this article I am going to explain how easily you can integrate the Microsoft translator API to your ASP.Net application. Why we need a translation API? Once you published a website, you are opening a channel to the global audience. So making the web content available only in one language doesn’t cover all your audience. Especially when you are offering products/services it is important to provide contents in multiple languages. Users will be more comfortable when they see the content in their native language. How to achieve this, hiring translators and translate the content to all your user’s languages will cost you lot of money, and it is not a one time job, you need to translate the contents on the go. What is the alternative, we need to look for machine translation. Thankfully there are some translator engines available that gives you API level access, so that automatically you can translate the content and display to the user. Microsoft Translator API is an excellent set of web service APIs that allows developers to use the machine translation technology in their own applications. The Microsoft Translator API is offered through Windows Azure market place. In order to access the data services published in Windows Azure market place, you need to have an account. The registration process is simple, and it is common for all the services offered through the market place. Last year I had written an article about Bing Search API, where I covered the registration process. You can refer the article here. http://weblogs.asp.net/sreejukg/archive/2012/07/04/integrate-bing-search-api-to-asp-net-application.aspx Once you registered with Windows market place, you will get your APP ID. Now you can visit the Microsoft Translator page and click on the sign up button. http://datamarket.azure.com/dataset/bing/microsofttranslator As you can see, there are several options available for you to subscribe. There is a free version available, great. Click on the sign up button under the package that suits you. Clicking on the sign up button will bring the sign up form, where you need to agree on the terms and conditions and go ahead. You need to have a windows live account in order to sign up for any service available in Windows Azure market place. Once you signed up successfully, you will receive the thank you page. You can download the C# class library from here so that the integration can be made without writing much code. The C# file name is TranslatorContainer.cs. At any point of time, you can visit https://datamarket.azure.com/account/datasets to see the applications you are subscribed to. Click on the Use link next to each service will give you the details of the application. You need to not the primary account key and URL of the service to use in your application. Now let us start our ASP.Net project. I have created an empty ASP.Net web application using Visual Studio 2010 and named it Translator Sample, any name could work. By default, the web application in solution explorer looks as follows. Now right click the project and select Add -> Existing Item and then browse to the TranslatorContainer.cs. Now let us create a page where user enter some data and perform the translation. I have added a new web form to the project with name Translate.aspx. I have placed one textbox control for user to type the text to translate, the dropdown list to select the target language, a label to display the translated text and a button to perform the translation. For the dropdown list I have selected some languages supported by Microsoft translator. You can get all the supported languages with their codes from the below link. http://msdn.microsoft.com/en-us/library/hh456380.aspx The form looks as below in the design surface of Visual Studio. All the class libraries in the windows market place requires reference to System.Data.Services.Client, let us add the reference. You can find the documentation of how to use the downloaded class library from the below link. http://msdn.microsoft.com/en-us/library/gg312154.aspx Let us evaluate the translatorContainer.cs file. You can refer the code and it is self-explanatory. Note the namespace name used (Microsoft), you need to add the namespace reference to your page. I have added the following event for the translate button. The code is self-explanatory. You are creating an object of TranslatorContainer class by passing the translation service URL. Now you need to set credentials for your Translator container object, which will be your account key. The TranslatorContainer support a method that accept a text input, source language and destination language and returns DataServiceQuery<Translation>. Let us see this working, I just ran the application and entered Good Morning in the Textbox. Selected target language and see the output as follows. It is easy to build great translator applications using Microsoft translator API, and there is a reasonable amount of translation you can perform in your application for free. For enterprises, you can subscribe to the appropriate package and make your application multi-lingual.

  Read the article

• SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

  - by thatjeffsmith

  As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

  Read the article

• CQRS - Benefits

  - by Dylan Smith

  Thanks to all the comments and feedback from the last post I think I have a better understanding now of the benefits of CQRS (separate from the benefits of Event Sourcing). I’m going to try and sum it up here, and point out some areas where I could still use some advice: CQRS Benefits Sounds like the primary benefit of CQRS as an architecture is it allows you to create a simpler domain model by sucking out everything related to queries. I can definitely see the benefit to this, in general the domain logic related to commands is the high-value behavior in the software, but the logic required to service the queries would add a lot of low-value “noise” to the domain model that would dilute the high-value (command) behavior – sorting, paging, filtering, pre-fetch paths, etc. Also the most appropriate domain structure for implementing commands might not be the most optimal for implementing queries. To paraphrase Greg, this usually results in a domain model that is mediocre at both, piss-poor at one, or more likely piss-poor at both commands and queries. Not only will you be able to simplify your domain model by pulling out all the query logic, but at least a handful of commands in most systems will probably be “pass-though” type commands with little to no logic that just generate events. If these can be implemented directly in the command-handler and never touch the domain model, this allows you to slim down the domain model even more. Also, if you were to do event sourcing without CQRS, you no longer have a database containing the current state (only the domain model would) which makes it difficult (or impossible) to support ad-hoc querying and/or reporting that is common in most business software. Of course CQRS provides some great scalability benefits, not only scalability but I have to assume that it provides extremely low latency for most operations, especially if you have an asynchronous event bus. I know Greg says that you get a 3x scaling (Commands, Queries, Client) of your ability to perform parallel development, but IMHO, it seems like it only provides 1.5x scaling since even without CQRS you’re going to have your client loosely coupled to your domain - which is still a great benefit to be able to realize. Questions / Concerns If all the queries against an aggregate get pulled out to the Query layer, what if the only commands for that aggregate can be handled in a “pass-through” manner with the command handler directly generating events. Is it possible to have an aggregate that isn’t modeled in the domain model? Are there any issues or downsides to this? I know in the feedback from my previous posts it was suggested that having one domain model handling both commands and queries requires implementing a lot of traversals between objects that wouldn’t be necessary if it was only servicing commands. My question is, do you include traversals in your domain model based on the needs of the code, or based on the conceptual domain model? If none of my Commands require a Customer.Orders traversal, but the conceptual domain includes the concept of a set of orders belonging to a customer – should I model that in my domain model or not? I like the idea of using the Query side of the architecture as a place to put junior devs where the risk of them screwing something up has minimal impact. But I’m not sold on the idea that you can actually outsource it. Like I said in one of my comments on my previous post, the code to handle a query and generate DTO’s is going to be dead simple, but the code to process events and apply them to the tables on the query side is going to require a significant amount of domain knowledge to know which events to listen for to update each of the de-normalized tables (and what changes need to be made when each event is processed). I don’t know about everybody else, but having Indian/Russian/whatever outsourced developers have to do anything that requires significant domain knowledge has never been successful in my experience. And if you need to spec out for each new query which events to listen to and what to do with each one, well that’s probably going to be just as much work to document as it would be to just implement it. Greg made the point in a comment that doing an aggregate query like “Total Sales By Customer” is going to be inefficient if you use event sourcing but not CQRS. I don’t understand why that would be the case. I imagine in that case you’d simply have a method/property on the Customer object that calculated total sales for that customer by enumerating over the Orders collection. Then the application services layer would generate DTO’s off of the Customers collection that included say the CustomerID, CustomerName, TotalSales, or whatever the case may be. As long as you use a snapshotting implementation, I don’t see why that would be anymore inefficient in a DDD+Event Sourcing implementation than in a typical DDD implementation. Like I mentioned in my last post I still have some questions about query logic that haven’t been answered yet, but before I start asking those I want to make sure I have a strong grasp on what benefits CQRS provides.  My main concern with the query logic was that I know I could just toss it all into the query side, but I was concerned that I would be losing the benefits of using CQRS in the first place if I did that.  I want to elaborate more on this though with some example situations in an upcoming post.

  Read the article

• The way I think about Diagnostic tools

  - by Daniel Moth

  Every software has issues, or as we like to call them "bugs". That is not a discussion point, just a mere fact. It follows that an important skill for developers is to be able to diagnose issues in their code. Of course we need to advance our tools and techniques so we can prevent bugs getting into the code (e.g. unit testing), but beyond designing great software, diagnosing bugs is an equally important skill. To diagnose issues, the most important assets are good techniques, skill, experience, and maybe talent. What also helps is having good diagnostic tools and what helps further is knowing all the features that they offer and how to use them. The following classification is how I like to think of diagnostics. Note that like with any attempt to bucketize anything, you run into overlapping areas and blurry lines. Nevertheless, I will continue sharing my generalizations ;-) It is important to identify at the outset if you are dealing with a performance or a correctness issue. If you have a performance issue, use a profiler. I hear people saying "I am using the debugger to debug a performance issue", and that is fine, but do know that a dedicated profiler is the tool for that job. Just because you don't need them all the time and typically they cost more plus you are not as familiar with them as you are with the debugger, doesn't mean you shouldn't invest in one and instead try to exclusively use the wrong tool for the job. Visual Studio has a profiler and a concurrency visualizer (for profiling multi-threaded apps). If you have a correctness issue, then you have several options - that's next :-) This is how I think of identifying a correctness issue Do you want a tool to find the issue for you at design time? The compiler is such a tool - it gives you an exact list of errors. Compilers now also offer warnings, which is their way of saying "this may be an error, but I am not smart enough to know for sure". There are also static analysis tools, which go a step further than the compiler in identifying issues in your code, sometimes with the aid of code annotations and other times just by pointing them at your raw source. An example is FxCop and much more in Visual Studio 11 Code Analysis. Do you want a tool to find the issue for you with code execution? Just like static tools, there are also dynamic analysis tools that instead of statically analyzing your code, they analyze what your code does dynamically at runtime. Whether you have to setup some unit tests to invoke your code at runtime, or have to manually run your app (and interact with it) under the tool, or have to use a script to execute your binary under the tool… that varies. The result is still a list of issues for you to address after the analysis is complete or a pause of the execution when the first issue is encountered. If a code path was not taken, no analysis for it will exist, obviously. An example is the GPU Race detection tool that I'll be talking about on the C++ AMP team blog. Another example is the MSR concurrency CHESS tool. Do you want you to find the issue at design time using a tool? Perform a code walkthrough on your own or with colleagues. There are code review tools that go beyond just diffing sources, and they help you with that aspect too. For example, there is a new one in Visual Studio 11 and searching with my favorite search engine yielded this article based on the Developer Preview. Do you want you to find the issue with code execution? Use a debugger - let’s break this down further next. This is how I think of debugging: There is post mortem debugging. That means your code has executed and you did something in order to examine what happened during its execution. This can vary from manual printf and other tracing statements to trace events (e.g. ETW) to taking dumps. In all cases, you are left with some artifact that you examine after the fact (after code execution) to discern what took place hoping it will help you find the bug. Learn how to debug dump files in Visual Studio. There is live debugging. I will elaborate on this in a separate post, but this is where you inspect the state of your program during its execution, and try to find what the problem is. More from me in a separate post on live debugging. There is a hybrid of live plus post-mortem debugging. This is for example what tools like IntelliTrace offer. If you are a tools vendor interested in the diagnostics space, it helps to understand where in the above classification your tool excels, where its primary strength is, so you can market it as such. Then it helps to see which of the other areas above your tool touches on, and how you can make it even better there. Finally, see what areas your tool doesn't help at all with, and evaluate whether it should or continue to stay clear. Even though the classification helps us think about this space, the reality is that the best tools are either extremely excellent in only one of this areas, or more often very good across a number of them. Another approach is to offer a toolset covering all areas, with appropriate integration and hand off points from one to the other. Anyway, with that brain dump out of the way, in follow-up posts I will dive into live debugging, and specifically live debugging in Visual Studio - stay tuned if that interests you. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• SQL SERVER – Fundamentals of Columnstore Index

  - by pinaldave

  There are two kind of storage in database. Row Store and Column Store. Row store does exactly as the name suggests – stores rows of data on a page – and column store stores all the data in a column on the same page. These columns are much easier to search – instead of a query searching all the data in an entire row whether the data is relevant or not, column store queries need only to search much lesser number of the columns. This means major increases in search speed and hard drive use. Additionally, the column store indexes are heavily compressed, which translates to even greater memory and faster searches. I am sure this looks very exciting and it does not mean that you convert every single index from row store to column store index. One has to understand the proper places where to use row store or column store indexes. Let us understand in this article what is the difference in Columnstore type of index. Column store indexes are run by Microsoft’s VertiPaq technology. However, all you really need to know is that this method of storing data is columns on a single page is much faster and more efficient. Creating a column store index is very easy, and you don’t have to learn new syntax to create them. You just need to specify the keyword “COLUMNSTORE” and enter the data as you normally would. Keep in mind that once you add a column store to a table, though, you cannot delete, insert or update the data – it is READ ONLY. However, since column store will be mainly used for data warehousing, this should not be a big problem. You can always use partitioning to avoid rebuilding the index. A columnstore index stores each column in a separate set of disk pages, rather than storing multiple rows per page as data traditionally has been stored. The difference between column store and row store approaches is illustrated below: In case of the row store indexes multiple pages will contain multiple rows of the columns spanning across multiple pages. In case of column store indexes multiple pages will contain multiple single columns. This will lead only the columns needed to solve a query will be fetched from disk. Additionally there is good chance that there will be redundant data in a single column which will further help to compress the data, this will have positive effect on buffer hit rate as most of the data will be in memory and due to same it will not need to be retrieved. Let us see small example of how columnstore index improves the performance of the query on a large table. As a first step let us create databaseset which is large enough to show performance impact of columnstore index. The time taken to create sample database may vary on different computer based on the resources. USE AdventureWorks GO -- Create New Table CREATE TABLE [dbo].[MySalesOrderDetail]( [SalesOrderID] [int] NOT NULL, [SalesOrderDetailID] [int] NOT NULL, [CarrierTrackingNumber] [nvarchar](25) NULL, [OrderQty] [smallint] NOT NULL, [ProductID] [int] NOT NULL, [SpecialOfferID] [int] NOT NULL, [UnitPrice] [money] NOT NULL, [UnitPriceDiscount] [money] NOT NULL, [LineTotal] [numeric](38, 6) NOT NULL, [rowguid] [uniqueidentifier] NOT NULL, [ModifiedDate] [datetime] NOT NULL ) ON [PRIMARY] GO -- Create clustered index CREATE CLUSTERED INDEX [CL_MySalesOrderDetail] ON [dbo].[MySalesOrderDetail] ( [SalesOrderDetailID]) GO -- Create Sample Data Table -- WARNING: This Query may run upto 2-10 minutes based on your systems resources INSERT INTO [dbo].[MySalesOrderDetail] SELECT S1.* FROM Sales.SalesOrderDetail S1 GO 100 Now let us do quick performance test. I have kept STATISTICS IO ON for measuring how much IO following queries take. In my test first I will run query which will use regular index. We will note the IO usage of the query. After that we will create columnstore index and will measure the IO of the same. -- Performance Test -- Comparing Regular Index with ColumnStore Index USE AdventureWorks GO SET STATISTICS IO ON GO -- Select Table with regular Index SELECT ProductID, SUM(UnitPrice) SumUnitPrice, AVG(UnitPrice) AvgUnitPrice, SUM(OrderQty) SumOrderQty, AVG(OrderQty) AvgOrderQty FROM [dbo].[MySalesOrderDetail] GROUP BY ProductID ORDER BY ProductID GO -- Table 'MySalesOrderDetail'. Scan count 1, logical reads 342261, physical reads 0, read-ahead reads 0. -- Create ColumnStore Index CREATE NONCLUSTERED COLUMNSTORE INDEX [IX_MySalesOrderDetail_ColumnStore] ON [MySalesOrderDetail] (UnitPrice, OrderQty, ProductID) GO -- Select Table with Columnstore Index SELECT ProductID, SUM(UnitPrice) SumUnitPrice, AVG(UnitPrice) AvgUnitPrice, SUM(OrderQty) SumOrderQty, AVG(OrderQty) AvgOrderQty FROM [dbo].[MySalesOrderDetail] GROUP BY ProductID ORDER BY ProductID GO It is very clear from the results that query is performance extremely fast after creating ColumnStore Index. The amount of the pages it has to read to run query is drastically reduced as the column which are needed in the query are stored in the same page and query does not have to go through every single page to read those columns. If we enable execution plan and compare we can see that column store index performance way better than regular index in this case. Let us clean up the database. -- Cleanup DROP INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] GO TRUNCATE TABLE dbo.MySalesOrderDetail GO DROP TABLE dbo.MySalesOrderDetail GO In future posts we will see cases where Columnstore index is not appropriate solution as well few other tricks and tips of the columnstore index. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• while running mvn jetty:run showing the following error ..

  - by munna

  C:\source\myprojectmvn jetty:run [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Building AppFuse Spring MVC Application [INFO] task-segment: [jetty:run] [INFO] ------------------------------------------------------------------------ [INFO] Preparing jetty:run [WARNING] POM for 'xfire:xfire-jsr181-api:pom:1.0-M1:compile' is invalid. Its dependencies (if any) will NOT be available to the current build. [INFO] [warpath:add-classes {execution: default}] [INFO] [aspectj:compile {execution: default}] [INFO] [native2ascii:native2ascii {execution: native2ascii-utf8}] [INFO] [native2ascii:native2ascii {execution: native2ascii-8859_1}] [INFO] [resources:resources {execution: default-resources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 12 resources [INFO] Copying 1 resource [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [resources:testResources {execution: default-testResources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 4 resources [INFO] Copying 9 resources [INFO] Preparing hibernate3:hbm2ddl [WARNING] Removing: hbm2ddl from forked lifecycle, to prevent recursive invocati on. [INFO] [warpath:add-classes {execution: default}] [INFO] [aspectj:compile {execution: default}] [INFO] [native2ascii:native2ascii {execution: native2ascii-utf8}] [INFO] [native2ascii:native2ascii {execution: native2ascii-8859_1}] [INFO] [resources:resources {execution: default-resources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 12 resources [INFO] Copying 1 resource [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] [hibernate3:hbm2ddl {execution: default}] [INFO] Configuration XML file loaded: file:/C:/source/myproject/src/main/resourc es/hibernate.cfg.xml [INFO] Configuration XML file loaded: file:/C:/source/myproject/src/main/resourc es/hibernate.cfg.xml [INFO] Configuration Properties file loaded: C:\source\myproject\target\classes\ jdbc.properties alter table user_role drop foreign key FK143BF46A4FD90D75; alter table user_role drop foreign key FK143BF46AF503D155; drop table if exists app_user; drop table if exists role; drop table if exists user_role; create table app_user (id bigint not null auto_increment, account_expired bit no t null, account_locked bit not null, address varchar(150), city varchar(50) not null, country varchar(100), postal_code varchar(15) not null, province varchar(1 00), credentials_expired bit not null, email varchar(255) not null unique, accou nt_enabled bit, first_name varchar(50) not null, last_name varchar(50) not null, password varchar(255) not null, password_hint varchar(255), phone_number varcha r(255), username varchar(50) not null unique, version integer, website varchar(2 55), primary key (id)) ENGINE=InnoDB; create table role (id bigint not null auto_increment, description varchar(64), n ame varchar(20), primary key (id)) ENGINE=InnoDB; create table user_role (user_id bigint not null, role_id bigint not null, primar y key (user_id, role_id)) ENGINE=InnoDB; alter table user_role add index FK143BF46A4FD90D75 (role_id), add constraint FK1 43BF46A4FD90D75 foreign key (role_id) references role (id); alter table user_role add index FK143BF46AF503D155 (user_id), add constraint FK1 43BF46AF503D155 foreign key (user_id) references app_user (id); [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] Nothing to compile - all classes are up to date [INFO] [dbunit:operation {execution: test-compile}] [INFO] [jetty:run {execution: default-cli}] [INFO] Configuring Jetty for project: AppFuse Spring MVC Application [INFO] Webapp source directory = C:\source\myproject\src\main\webapp [INFO] web.xml file = C:\source\myproject\src\main\webapp\WEB-INF\web.xml [INFO] Classes = C:\source\myproject\target\classes [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\applicationContext-validation.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\applicationContext.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\dispatcher-servlet.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\menu-config.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\urlrewrite.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validation.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validator-rules-custom.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validator-rules.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\web.xml 2010-06-02 15:13:28.921::INFO: Logging to STDERR via org.mortbay.log.StdErrLog [INFO] Context path = / [INFO] Tmp directory = determined at runtime [INFO] Web defaults = org/mortbay/jetty/webapp/webdefault.xml [INFO] Web overrides = none [INFO] Webapp directory = C:\source\myproject\src\main\webapp [INFO] Starting jetty 6.1.9 ... 2010-06-02 15:13:28.983::INFO: jetty-6.1.9 2010-06-02 15:13:28.248::INFO: No Transaction manager found - if your webapp re quires one, please configure one. 2010-06-02 15:13:28.482:/:INFO: Initializing Spring root WebApplicationContext [myproject] ERROR [main] ContextLoader.initWebApplicationContext(215) | Context initialization failed org.springframework.beans.factory.BeanDefinitionStoreException: IOException pars ing XML document from ServletContext resource [/WEB-INF/xfire-servlet.xml]; nest ed exception is java.io.FileNotFoundException: Could not open ServletContext res ource [/WEB-INF/xfire-servlet.xml] at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:349) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) ... 51 more 2010-06-02 15:13:29.919::WARN: Failed startup of context org.mortbay.jetty.plug in.Jetty6PluginWebAppContext@1ba4806{/,C:\source\myproject\src\main\webapp} org.springframework.beans.factory.BeanDefinitionStoreException: IOException pars ing XML document from ServletContext resource [/WEB-INF/xfire-servlet.xml]; nest ed exception is java.io.FileNotFoundException: Could not open ServletContext res ource [/WEB-INF/xfire-servlet.xml] at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:349) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) ... 51 more 2010-06-02 15:13:29.152::WARN: Nested in org.springframework.beans.factory.Bean DefinitionStoreException: IOException parsing XML document from ServletContext r esource [/WEB-INF/xfire-servlet.xml]; nested exception is java.io.FileNotFoundEx ception: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml]: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/ xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) 2010-06-02 15:13:29.417::INFO: Started [email protected]:8080 [INFO] Started Jetty Server [INFO] Starting scanner at interval of 3 seconds.

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >