Search Results

Search found 5203 results on 209 pages for 'rules of thumb'.

Page 190/209 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

  • IsNumeric() Broken? Only up to a point.

    - by Phil Factor
    In SQL Server, probably the best-known 'broken' function is poor ISNUMERIC() . The documentation says 'ISNUMERIC returns 1 when the input expression evaluates to a valid numeric data type; otherwise it returns 0. ISNUMERIC returns 1 for some characters that are not numbers, such as plus (+), minus (-), and valid currency symbols such as the dollar sign ($).'Although it will take numeric data types (No, I don't understand why either), its main use is supposed to be to test strings to make sure that you can convert them to whatever numeric datatype you are using (int, numeric, bigint, money, smallint, smallmoney, tinyint, float, decimal, or real). It wouldn't actually be of much use anyway, since each datatype has different rules. You actually need a RegEx to do a reasonably safe check. The other snag is that the IsNumeric() function  is a bit broken. SELECT ISNUMERIC(',')This cheerfully returns 1, since it believes that a comma is a currency symbol (not a thousands-separator) and you meant to say 0, in this strange currency.  However, SELECT ISNUMERIC(N'£')isn't recognized as currency.  '+' and  '-' is seen to be numeric, which is stretching it a bit. You'll see that what it allows isn't really broken except that it doesn't recognize Unicode currency symbols: It just tells you that one numeric type is likely to accept the string if you do an explicit conversion to it using the string. Both these work fine, so poor IsNumeric has to follow suit. SELECT  CAST('0E0' AS FLOAT)SELECT  CAST (',' AS MONEY) but it is harder to predict which data type will accept a '+' sign. SELECT  CAST ('+' AS money) --0.00SELECT  CAST ('+' AS INT)   --0SELECT  CAST ('+' AS numeric)/* Msg 8115, Level 16, State 6, Line 4 Arithmetic overflow error converting varchar to data type numeric.*/SELECT  CAST ('+' AS FLOAT)/*Msg 8114, Level 16, State 5, Line 5Error converting data type varchar to float.*/> So we can begin to say that the maybe IsNumeric isn't really broken, but is answering a silly question 'Is there some numeric datatype to which i can convert this string? Almost, but not quite. The bug is that it doesn't understand Unicode currency characters such as the euro or franc which are actually valid when used in the CAST function. (perhaps they're delaying fixing the euro bug just in case it isn't necessary).SELECT ISNUMERIC (N'?23.67') --0SELECT  CAST (N'?23.67' AS money) --23.67SELECT ISNUMERIC (N'£100.20') --1SELECT  CAST (N'£100.20' AS money) --100.20 Also the CAST function itself is quirky in that it cannot convert perfectly reasonable string-representations of integers into integersSELECT ISNUMERIC('200,000')       --1SELECT  CAST ('200,000' AS INT)   --0/*Msg 245, Level 16, State 1, Line 2Conversion failed when converting the varchar value '200,000' to data type int.*/  A more sensible question is 'Is this an integer or decimal number'. This cuts out a lot of the apparent quirkiness. We do this by the '+E0' trick. If we want to include floats in the check, we'll need to make it a bit more complicated. Here is a small test-rig. SELECT  PossibleNumber,         ISNUMERIC(CAST(PossibleNumber AS NVARCHAR(20)) + 'E+00') AS Hack,        ISNUMERIC (PossibleNumber + CASE WHEN PossibleNumber LIKE '%E%'                                          THEN '' ELSE 'E+00' END) AS Hackier,        ISNUMERIC(PossibleNumber) AS RawIsNumericFROM    (SELECT CAST(',' AS NVARCHAR(10)) AS PossibleNumber          UNION SELECT '£' UNION SELECT '.'         UNION SELECT '56' UNION SELECT '456.67890'         UNION SELECT '0E0' UNION SELECT '-'         UNION SELECT '-' UNION SELECT '.'         UNION  SELECT N'?' UNION SELECT N'¢'        UNION  SELECT N'?' UNION SELECT N'?34.56'         UNION SELECT '-345' UNION SELECT '3.332228E+09') AS examples Which gives the result ... PossibleNumber Hack Hackier RawIsNumeric-------------- ----------- ----------- ------------? 0 0 0- 0 0 1, 0 0 1. 0 0 1¢ 0 0 1£ 0 0 1? 0 0 0?34.56 0 0 00E0 0 1 13.332228E+09 0 1 1-345 1 1 1456.67890 1 1 156 1 1 1 I suspect that this is as far as you'll get before you abandon IsNumeric in favour of a regex. You can only get part of the way with the LIKE wildcards, because you cannot specify quantifiers. You'll need full-blown Regex strings like these ..[-+]?\b[0-9]+(\.[0-9]+)?\b #INT or REAL[-+]?\b[0-9]{1,3}\b #TINYINT[-+]?\b[0-9]{1,5}\b #SMALLINT.. but you'll get even these to fail to catch numbers out of range.So is IsNumeric() an out and out rogue function? Not really, I'd say, but then it would need a damned good lawyer.

    Read the article

  • To Make Diversity Work, Managers Must Stop Ignoring Difference

    - by HCM-Oracle
    By Kate Pavao - Originally posted on Profit Executive coaches Jane Hyun and Audrey S. Lee noticed something during their leadership development coaching and consulting: Frustrated employees and overwhelmed managers. “We heard from voices saying, ‘I wish my manager understood me better’ or ‘I hope my manager would take the time to learn more about me and my background,’” remembers Hyun. “At the same token, the managers we were coaching had a hard time even knowing how to start these conversations.”  Hyun and Lee wrote Flex to address some of the fears managers have when it comes to leading diverse teams—such as being afraid of offending their employees by stumbling into sensitive territory—and also to provide a sure-footed strategy for becoming a more effective leader. Here, Hyun talks about what it takes to create innovate and productive teams in an increasingly diverse world, including the key characteristics successful managers share. Q: What does it mean to “flex”? Hyun: Flexing is the art of switching between leadership styles to work more effectively with people who are different from you. It’s not fundamentally changing who you are, but it’s understanding when you need to adapt your style in a situation so that you can accommodate people and make them feel more comfortable. It’s understanding the gap that might exist between you and others who are different, and then flexing across that gap to get the result that you're looking for. It’s up to all of us, not just managers, but also employees, to learn how to flex. When you hire new people to the organization, they're expected to adapt. The new people in the organization may need some guidance around how to best flex. They can certainly take the initiative, but if you can give them some direction around the important rules, and connect them with insiders who can help them figure out the most critical elements of the job, that will accelerate how quickly they can contribute to your organization. Q: Why is it important right now for managers to understand flexing? Hyun: The workplace is becoming increasingly younger, multicultural and female. The numbers bear it out. Millennials are entering the workforce and becoming a larger percentage of it, which is a global phenomenon. Thirty-six percent of the workforce is multicultural, and close to half is female. It makes sense to better understand the people who are increasingly a part of your workforce, and how to best lead them and manage them as well. Q: What do companies miss out on when managers don’t flex? Hyun: There are high costs for losing people or failing to engage them. The estimated costs of replacing an employee is about 150 percent of that person’s salary. There are studies showing that employee disengagement costs the U.S. something like $450 billion a year. But voice is the biggest thing you miss out on if you don’t flex. Whenever you want innovation or increased productivity from your people, you need to figure out how to unleash these things. The way you get there is to make sure that everybody’s voice is at the table. Q: What are some of the common misassumptions that managers make about the people on their teams? Hyun: One is what I call the Golden Rule mentality: We assume when we go to the workplace that people are going to think like us and operate like us. But sometimes when you work with people from a different culture or a different generation, they may have a different mindset about doing something, or a different approach to solving a problem, or a different way to manage some situation. When see something that’s different, we don't understand it, so we don't trust it. We have this hidden bias for people who are like us. That gets in the way of really looking at how we can tap our team members best potential by understanding how their difference may help them be effective in our workplace. We’re trained, especially in the workplace, to make assumptions quickly, so that you can make the best business decision. But with people, it’s better to remain curious. If you want to build stronger cross-cultural, cross-generational, cross-gender relationships, before you make a judgment, share what you observe with that team member, and connect with him or her in ways that are mutually adaptive, so that you can work together more effectively. Q: What are the common characteristics you see in leaders who are successful at flexing? Hyun: One is what I call “adaptive ability”—leaders who are able to understand that someone on their team is different from them, and willing to adapt his or her style to do that. Another one is “unconditional positive regard,” which is basically acceptance of others, even in their vulnerable moments. This attitude of grace is critical and essential to a healthy environment in developing people. If you think about when people enter the workforce, they're only 21 years old. It’s quite a formative time for them. They may not have a lot of management experience, or experience managing complex or even global projects. Creating the best possible condition for their development requires turning their mistakes into teachable moments, and giving them an opportunity to really learn. Finally, these leaders are not rigid or constrained in a single mode or style. They have this insatiable curiosity about other people. They don’t judge when they see behavior that doesn’t make sense, or is different from their own. For example, maybe someone on their team is a less aggressive than they are. The leader needs to remain curious and thinks, “Wow, I wonder how I can engage in a dialogue with this person to get their potential out in the open.”

    Read the article

  • Who could ask for more with LESS CSS? (Part 1 of 3&ndash;Features)

    - by ToStringTheory
    It wasn’t very long ago that I first began to get into CSS precompilers such as SASS (Syntactically Awesome Stylesheets) and LESS (The Dynamic Stylesheet Language) and I had been hooked on the idea since.  When I finally had a new project come up, I leapt at the opportunity to try out one of these languages. Introduction To be honest, I was hesitant at first to add either framework as I didn’t really know much more than what I had read on their homepages, and I didn’t like the idea of adding too much complexity to a project - I couldn’t guarantee I would be the only person to support it in the future. Thankfully, both of these languages just add things into CSS.  You don’t HAVE to know LESS or SASS to do anything, you can still do your old school CSS, and your output will be the same.  However, when you want to start doing more advanced things such as variables, mixins, and color functions, the functionality is all there for you to utilize. From what I had read, SASS has a few more features than LESS, which is why I initially tried to figure out how to incorporate it into a MVC 4 project. However, through my research, I couldn’t find a way to accomplish this without including some bit of the Ruby on Rails framework on the computer running it, and I hated the fact that I had to do that.  Besides SASS, there is little chance of me getting into the RoR framework, at least in the next couple years.  So in the end, I settled with using LESS. Features So, what can LESS (or SASS) do for you?  There are several reasons I have come to love it in the past few weeks. 1 – Constants Using LESS, you can finally declare a constant and use its value across an entire CSS file. The case that most people would be familiar with is colors.  Wanting to declare one or two color variables that comprise the theme of the site, and not have to retype out their specific hex code each time, but rather a variable name.  What’s great about this is that if you end up having to change it, you only have to change it in one place.  An important thing to note is that you aren’t limited to creating constants just for colors, but for strings and measurements as well. 2 – Inheritance This is a cool feature in my mind for simplicity and organization.  Both LESS and SASS allow you to place selectors within other selectors, and when it is compiled, the languages will break the rules out as necessary and keep the inheritance chain you created in the selectors. Example LESS Code: #header {   h1 {     font-size: 26px;     font-weight: bold;   }   p {     font-size: 12px;     a     {       text-decoration: none;       &:hover {         border-width: 1px       }     }   } } Example Compiled CSS: #header h1 {   font-size: 26px;   font-weight: bold; } #header p {   font-size: 12px; } #header p a {   text-decoration: none; } #header p a:hover {   border-width: 1px; } 3 - Mixins Mixins are where languages like this really shine.  The ability to mixin other definitions setup a parametric mixin.  There is really a lot of content in this area, so I would suggest looking at http://lesscss.org for more information.  One of the things I would suggest if you do begin to use LESS is to also grab the mixins.less file from the Twitter Bootstrap project.  This file already has a bunch of predefined mixins for things like border-radius with all of the browser specific prefixes.  This alone is of great use! 4 – Color Functions This is the last thing I wanted to point out as my final post in this series will be utilizing these functions in a more drawn out manner.  Both LESS and SASS provide functions for getting information from a color (R,G,B,H,S,L).  Using these, it is easy to define a primary color, and then darken or lighten it a little for your needs.  Example: Example LESS Code: @base-color: #111; @red:        #842210; #footer {   color: (@base-color + #003300);   border-left:  2px;   border-right: 2px;   border-color: desaturate(@red, 10%); } Example Compiled CSS: #footer {    color: #114411;    border-left:  2px;    border-right: 2px;    border-color: #7d2717; } I have found that these can be very useful and powerful when constructing a site theme. Conclusion I came across LESS and SASS when looking for the best way to implement some type of CSS variables for colors, because I hated having to do a Find and Replace in all of the files using the colors, and in some instances, you couldn’t just find/replace because of the color choices interfering with other colors (color to replace of #000, yet come colors existed like #0002bc).  So in many cases I would end up having to do a Find and manually check each one. In my next post, I am going to cover how I’ve come to set up these items and the structure for the items in the project, as well as the conventions that I have come to start using.  In the final post in the series, I will cover a neat little side project I built in LESS dealing with colors!

    Read the article

  • Changing multiple objects with a new class name using Jquery

    - by liquilife
    I'd like to click on a trigger and show a specific image. There are multiple triggers which would show a specific image related to it within a set. There are 4 sets The challenge for me is toggling the other images to hide only in this 'set' when one of these triggers are clicked, as there can only be one image showing at a time in each set. Here is the HTML I've put together thus far: <!-- Thumbnails which can be clicked on to toggle the larger preview image --> <div class="materials"> <a href="javascript:;" id="shirtgrey"><img src="/grey_shirt.png" height="122" width="122" /></a> <a href="javascript:;" id="shirtred"><img src="red_shirt.png" height="122" width="122" /></a> <a href="javascript:;" id="shirtblue"><img src="hblue_shirt.png" height="122" width="122" /></a> <a href="javascript:;" id="shirtgreen"><img src="green_shirt.png" height="122" width="122" /></a> </div> <div class="collars"> <a href="javascript:;" id="collargrey"><img src="grey_collar.png" height="122" width="122" /></a> <a href="javascript:;" id="collarred"><img src="red_collar.png" height="122" width="122" /></a> <a href="javascript:;" id="collarblue"><img src="blue_collar.png" height="122" width="122" /></a> <a href="javascript:;" id="collargreen"><img src="green_collar.png" height="122" width="122" /></a> </div> <div class="cuffs"> <a href="javascript:;" id="cuffgrey"><img src="grey_cuff.png" height="122" width="122" /></a> <a href="javascript:;" id="cuffred"><img src="red_cuff.png" height="122" width="122" /></a> <a href="javascript:;" id="cuffblue"><img src="blue_cuff.png" height="122" width="122" /></a> <a href="javascript:;" id="cuffgreen"><img src="/green_cuff.png" height="122" width="122" /></a> </div> <div class="pockets"> <a href="javascript:;" id="pocketgrey"><img src="grey_pocket.png" height="122" width="122" /></a> <a href="javascript:;" id="pocketred"><img src=".png" height="122" width="122" /></a> <a href="javascript:;" id="pocketblue"><img src="blue_pocket.png" height="122" width="122" /></a> <a href="javascript:;" id="pocketgreen"><img src="green_pocket.png" height="122" width="122" /></a> </div> <!-- The larger images where one from each set should be viewable at one time, triggered by the thumb clicked above --> <div class="selectionimg"> <div class="selectShirt"> <img src="grey_shirt.png" height="250" width="250" class="selectShirtGrey show" /> <img src="red_shirt.png" height="250" width="250" class="selectShirtRed hide" /> <img src="blue_shirt.png" height="250" width="250" class="selectShirtBlue hide" /> <img src="green_shirt.png" height="250" width="250" class="selectShirtGreen hide" /> </div> <div class="selectCollar"> <img src="grey_collar.png" height="250" width="250" class="selectCollarGrey show" /> <img src="red_collar.png" height="250" width="250" class="selectCollarRed hide" /> <img src="blue_collar.png" height="250" width="250" class="selectCollarBlue hide" /> <img src="green_collar.png" height="250" width="250" class="selectCollarGreen hide" /> </div> <div class="selectCuff"> <img src="grey_cuff.png" height="250" width="250" class="selectCuffGrey show" /> <img src="red_cuff.png" height="250" width="250" class="selectCuffRed hide" /> <img src="blue_cuff.png" height="250" width="250" class="selectCuffBlue hide" /> <img src="green_cuff.png" height="250" width="250" class="selectCuffGreen hide" /> </div> <div class="selectPocket"> <img src="grey_pocket.png" height="250" width="250" class="selectPocketGrey show" /> <img src="hred_pocket.png" height="250" width="250" class="selectPocketRed hide" /> <img src="blue_pocket.png" height="250" width="250" class="selectPocketBlue hide" /> <img src="green_pocket.png" height="250" width="250" class="selectPocketGreen hide" /> </div> </div> How can jQuery be used to change a class of an image to "show" and ensure that all other images in that same div are set to a class of "hide"? First time posting here. I'm very efficient with HTML and CSS and have a basic understanding of jQuery. I'm learning and this just seems a little bit beyond my abilities at the moment. I hope this all makes sense. Thanks for any help.

    Read the article

  • How to make this design closer to proper DDD?

    - by Seralize
    I've read about DDD for days now and need help with this sample design. All the rules of DDD make me very confused to how I'm supposed to build anything at all when domain objects are not allowed to show methods to the application layer; where else to orchestrate behaviour? Repositories are not allowed to be injected into entities and entities themselves must thus work on state. Then an entity needs to know something else from the domain, but other entity objects are not allowed to be injected either? Some of these things makes sense to me but some don't. I've yet to find good examples of how to build a whole feature as every example is about Orders and Products, repeating the other examples over and over. I learn best by reading examples and have tried to build a feature using the information I've gained about DDD this far. I need your help to point out what I do wrong and how to fix it, most preferably with code as "I would not recomment doing X and Y" is very hard to understand in a context where everything is just vaguely defined already. If I can't inject an entity into another it would be easier to see how to do it properly. In my example there are users and moderators. A moderator can ban users, but with a business rule: only 3 per day. I did an attempt at setting up a class diagram to show the relationships (code below): interface iUser { public function getUserId(); public function getUsername(); } class User implements iUser { protected $_id; protected $_username; public function __construct(UserId $user_id, Username $username) { $this->_id = $user_id; $this->_username = $username; } public function getUserId() { return $this->_id; } public function getUsername() { return $this->_username; } } class Moderator extends User { protected $_ban_count; protected $_last_ban_date; public function __construct(UserBanCount $ban_count, SimpleDate $last_ban_date) { $this->_ban_count = $ban_count; $this->_last_ban_date = $last_ban_date; } public function banUser(iUser &$user, iBannedUser &$banned_user) { if (! $this->_isAllowedToBan()) { throw new DomainException('You are not allowed to ban more users today.'); } if (date('d.m.Y') != $this->_last_ban_date->getValue()) { $this->_ban_count = 0; } $this->_ban_count++; $date_banned = date('d.m.Y'); $expiration_date = date('d.m.Y', strtotime('+1 week')); $banned_user->add($user->getUserId(), new SimpleDate($date_banned), new SimpleDate($expiration_date)); } protected function _isAllowedToBan() { if ($this->_ban_count >= 3 AND date('d.m.Y') == $this->_last_ban_date->getValue()) { return false; } return true; } } interface iBannedUser { public function add(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date); public function remove(); } class BannedUser implements iBannedUser { protected $_user_id; protected $_date_banned; protected $_expiration_date; public function __construct(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date) { $this->_user_id = $user_id; $this->_date_banned = $date_banned; $this->_expiration_date = $expiration_date; } public function add(UserId $user_id, SimpleDate $date_banned, SimpleDate $expiration_date) { $this->_user_id = $user_id; $this->_date_banned = $date_banned; $this->_expiration_date = $expiration_date; } public function remove() { $this->_user_id = ''; $this->_date_banned = ''; $this->_expiration_date = ''; } } // Gathers objects $user_repo = new UserRepository(); $evil_user = $user_repo->findById(123); $moderator_repo = new ModeratorRepository(); $moderator = $moderator_repo->findById(1337); $banned_user_factory = new BannedUserFactory(); $banned_user = $banned_user_factory->build(); // Performs ban $moderator->banUser($evil_user, $banned_user); // Saves objects to database $user_repo->store($evil_user); $moderator_repo->store($moderator); $banned_user_repo = new BannedUserRepository(); $banned_user_repo->store($banned_user); Should the User entitity have a 'is_banned' field which can be checked with $user->isBanned();? How to remove a ban? I have no idea.

    Read the article

  • Web optimization

    - by hmloo
    1. CSS Optimization Organize your CSS code Good CSS organization helps with future maintainability of the site, it helps you and your team member understand the CSS more quickly and jump to specific styles. Structure CSS code For small project, you can break your CSS code in separate blocks according to the structure of the page or page content. for example you can break your CSS document according the content of your web page(e.g. Header, Main Content, Footer) Structure CSS file For large project, you may feel having too much CSS code in one place, so it's the best to structure your CSS into more CSS files, and use a master style sheet to import these style sheets. this solution can not only organize style structure, but also reduce server request./*--------------Master style sheet--------------*/ @import "Reset.css"; @import "Structure.css"; @import "Typography.css"; @import "Forms.css"; Create index for your CSS Another important thing is to create index at the beginning of your CSS file, index can help you quickly understand the whole CSS structure./*---------------------------------------- 1. Header 2. Navigation 3. Main Content 4. Sidebar 5. Footer ------------------------------------------*/ Writing efficient CSS selectors keep in mind that browsers match CSS selectors from right to left and the order of efficiency for selectors 1. id (#myid) 2. class (.myclass) 3. tag (div, h1, p) 4. adjacent sibling (h1 + p) 5. child (ul > li) 6. descendent (li a) 7. universal (*) 8. attribute (a[rel="external"]) 9. pseudo-class and pseudo element (a:hover, li:first) the rightmost selector is called "key selector", so when you write your CSS code, you should choose more efficient key selector. Here are some best practice: Don't tag-qualify Never do this:div#myid div.myclass .myclass#myid IDs are unique, classes are more unique than a tag so they don't need a tag. Doing so makes the selector less efficient. Avoid overqualifying selectors for example#nav a is more efficient thanul#nav li a Don't repeat declarationExample: body {font-size:12px;}h1 {font-size:12px;font-weight:bold;} since h1 is already inherited from body, so you don't need to repeate atrribute. Using 0 instead of 0px Always using #selector { margin: 0; } There’s no need to include the px after 0, removing all those superfluous px can reduce the size of your CSS file. Group declaration Example: h1 { font-size: 16pt; } h1 { color: #fff; } h1 { font-family: Arial, sans-serif; } it’s much better to combine them:h1 { font-size: 16pt; color: #fff; font-family: Arial, sans-serif; } Group selectorsExample: h1 { color: #fff; font-family: Arial, sans-serif; } h2 { color: #fff; font-family: Arial, sans-serif; } it would be much better if setup as:h1, h2 { color: #fff; font-family: Arial, sans-serif; } Group attributeExample: h1 { color: #fff; font-family: Arial, sans-serif; } h2 { color: #fff; font-family: Arial, sans-serif; font-size: 16pt; } you can set different rules for specific elements after setting a rule for a grouph1, h2 { color: #fff; font-family: Arial, sans-serif; } h2 { font-size: 16pt; } Using Shorthand PropertiesExample: #selector { margin-top: 8px; margin-right: 4px; margin-bottom: 8px; margin-left: 4px; }Better: #selector { margin: 8px 4px 8px 4px; }Best: #selector { margin: 8px 4px; } a good diagram illustrated how shorthand declarations are interpreted depending on how many values are specified for margin and padding property. instead of using:#selector { background-image: url(”logo.png”); background-position: top left; background-repeat: no-repeat; } is used:#selector { background: url(logo.png) no-repeat top left; } 2. Image Optimization Image Optimizer Image Optimizer is a free Visual Studio2010 extension that optimizes PNG, GIF and JPG file sizes without quality loss. It uses SmushIt and PunyPNG for the optimization. Just right click on any folder or images in Solution Explorer and choose optimize images, then it will automatically optimize all PNG, GIF and JPEG files in that folder. CSS Image Sprites CSS Image Sprites are a way to combine a collection of images to a single image, then use CSS background-position property to shift the visible area to show the required image, many images can take a long time to load and generates multiple server requests, so Image Sprite can reduce the number of server requests and improve site performance. You can use many online tools to generate your image sprite and CSS, and you can also try the Sprite and Image Optimization framework released by The ASP.NET team.

    Read the article

  • Rails 2 and Ngnix: https pages can't load css or js (but will load graphics)

    - by Max Williams
    ADMISSION: i've posted this same question on stackoverflow, before realising it's probabaly better suited to superuser, but it kind of depends on the answer: If it turns out to be a problem in my nginx config, it's definitely superuser. If it turns out to be a problem in my Rails config (or code) then it's arguably stackoverflow. I'm adding some https pages to my rails site. In order to test it locally, i'm running my site under one mongrel_rails instance (on 3000) and nginx. I've managed to get my nginx config to the point where i can actually go to the https pages, and they load. Except, the javascript and css files all fail to load: looking in the Network tab in chrome web tools, i can see that it is trying to load them via an https url. Eg, one of the non-working file urls is https://cmw-local.co.uk/stylesheets/cmw-logged-out.css?1383759216 I have these set up (or at least think i do) in my nginx config to redirect to the http versions of the static files. This seems to be working for graphics, but not for css and js files. If i click on this in the Network tab, it takes me to the above url, which redirects to the http version. So, the redirect seems to be working in some sense, but not when they're loaded by an https page. Like i say, i thought i had this covered in the second try_files directive in my config below, but maybe not. Can anyone see what i'm doing wrong? thanks, Max Here's my nginx config - sorry it's a bit lengthy! I think the error is likely to be in the first (ssl) server block: server { listen 443 ssl; keepalive_timeout 70; ssl_certificate /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.crt; ssl_certificate_key /home/max/work/charanga/elearn_container/elearn/config/nginx/certs/max-local-server.key; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_protocols SSLv3 TLSv1; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; # ensure that we serve css, js, other statics when requested # as SSL, but if the files don't exist (i.e. any non /basket controller) # then redirect to the non-https version location / { try_files $uri @non-ssl-redirect; } # securely serve everything under /basket (/basket/checkout etc) # we need general too, because of the email/username checking location ~ ^/(basket|general|cmw/account/check_username_availability) { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running # other rewrite tests try_files $uri @rails-ssl; expires 1h; } location @non-ssl-redirect { return 301 http://$host$request_uri; } location @rails-ssl { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } } #upstream elrs { # server 127.0.0.1:3000; #} server { listen 80; server_name elearning.dev cmw-dev.co.uk cmw-dev.com cmw-nginx.co.uk cmw-local.co.uk; root /home/max/work/charanga/elearn_container/elearn; access_log /home/max/work/charanga/elearn_container/elearn/log/access.log; error_log /home/max/work/charanga/elearn_container/elearn/log/error.log debug; client_max_body_size 50M; index index.html index.htm; # gzip html, css & javascript, but don't gzip javascript for pre-SP2 MSIE6 (i.e. those *without* SV1 in their user-agent string) gzip on; gzip_http_version 1.1; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; #text/html # make sure gzip does not lose large gzipped js or css files # see http://blog.leetsoft.com/2007/7/25/nginx-gzip-ssl gzip_buffers 16 8k; # Disable gzip for certain browsers. #gzip_disable "MSIE [1-6].(?!.*SV1)"; gzip_disable "MSIE [1-6]"; # blank gif like it's 1995 location = /images/blank.gif { empty_gif; } # don't serve files beginning with dots location ~ /\. { access_log off; log_not_found off; deny all; } # we don't care if these are missing location = /robots.txt { log_not_found off; } location = /favicon.ico { log_not_found off; } location ~ affiliate.xml { log_not_found off; } location ~ copyright.xml { log_not_found off; } # convert urls with multiple slashes to a single / if ($request ~ /+ ) { rewrite ^(/)+(.*) /$2 break; } # X-Accel-Redirect # Don't tie up mongrels with serving the lesson zips or exes, let Nginx do it instead location /zips { internal; root /var/www/apps/e_learning_resource/shared/assets; } location /tmp { internal; root /; } location /mnt{ root /; } # resource library thumbnails should be served as usual location ~ ^/resource_library/.*/*thumbnail.jpg$ { if (!-f $request_filename) { rewrite ^(.*)$ /images/no-thumb.png break; } expires 1m; } # don't make Rails generate the dynamic routes to the dcr and swf, we'll do it here location ~ "lesson viewer.dcr" { rewrite ^(.*)$ "/assets/players/lesson viewer.dcr" break; } # we need this rule so we don't serve the older lessonviewer when the rule below is matched location = /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf { rewrite ^(.*)$ /assets/players/virgin_lesson_viewer/_cha5513/lessonViewer.swf break; } location ~ v6lessonViewer.swf { rewrite ^(.*)$ /assets/players/v6lessonViewer.swf break; } location ~ lessonViewer.swf { rewrite ^(.*)$ /assets/players/lessonViewer.swf break; } location ~ lgn111.dat { empty_gif; } # try to get autocomplete school names from memcache first, then # fallback to rails when we can't location /schools/autocomplete { set $memcached_key $uri?q=$arg_q; memcached_pass 127.0.0.1:11211; default_type text/html; error_page 404 =200 @rails; # 404 not really! Hand off to rails } location / { # make sure cached copies are revalidated once they're stale add_header Cache-Control "public, must-revalidate, proxy-revalidate"; # this serves Rails static files that exist without running other rewrite tests try_files $uri @rails; expires 1h; } location @rails { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_read_timeout 180; proxy_next_upstream off; proxy_pass http://127.0.0.1:3000; expires 0d; } }

    Read the article

  • Configuring Cisco 877W router from scratch for DHCP, WiFi, ADSL2+, NAT

    - by David M Williams
    Hi all, I apologise if this is a BIG question but I am quite lost with the Cisco IOS. I know what I want to achieve just not how to do it :( I have a Cisco 877W router with 4 FastEthernet interfaces, 1 ATM interface and 1 802.11 Radio. I want to set it up for a small network and am trying to construct a configuration below. I was using Google to try and flesh it out but I think I need help and guidance from actual experts! If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software Here's what I have so far, which hopefully outlines clearly enough what I am wanting to do. The bits in angle brackets are placeholders (eg the secret password). ! ! Set router hostname ! hostname Shazam ! ! Set usernames and passwords ! username david privilege 15 secret 0 <PASSWORD> enable secret <SECRETPASSWORD> ! ! Configure SSH and telnet access ! line vty 0 4 privilege level 15 login local transport input telnet ssh ! ! Local logging ! logging buffered 51200 warning ! ! Set date and time for NSW, Australia (GMT +10h) ! ! ! Set router IP address to 192.168.1.1 on FastEthernet0 port ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 no shut ip nat inside ! ! Forward any unknown DNS requests to Google ! ip dns server ip name-server 8.8.8.8 ip name-server 8.8.4.4 ! ! Set up DHCP ! DHCP pool covers 192.168.1.100 - .199 ! Set gateway and DNS server to be the router, ie 192.168.1.1 ! service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool <DHCPPOOLNAME> network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ! ! DHCP reservations ! ! Assign IP address 192.168.1.105 to MAC address 00-21-5D-2F-58-04 ! ! Configure ADSL2 connection details ! interface atm dsl operating-mode adsl2+ ! ! Set up NAT rules ! ! Forward port 35394 to 192.168.1.105 ! ! Set up WiFi ! ! SSID visible, WPA2 security, Pre-shared key I'm hoping most of this is boiler-plate stuff to you guys. I'm keen to not just get a working script but to actually understand it also. Unfortunately, I'm finding the Cisco reference material online very complex. Thank you!

    Read the article

  • Locating Rogue Perl Script

    - by Gary Garside
    I've been trying to source the location of a perl script which is causing havoc on a server which i control. I'm also trying to find out exactly how this script was installed on the server - my best guess is through a wordpress exploit. The server is a basic web setup running Ubuntu 9.04, Apache and MySQL. I use IPTables for firewall, the site runs around 20 sites and the load never really creeps above 0.7. From what i can see the script is making outbound connection to other servers (most likely trying to brute force entry). Here is a top dump of one of the processes: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22569 www-data 20 0 22784 3216 780 R 100 0.2 47:00.60 perl The command the process is running is /usr/sbin/sshd . I've tried to find an exact file name but im having no luck... i've ran a lsof -p PID and here is the output: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME perl 22569 www-data cwd DIR 8,6 4096 2 / perl 22569 www-data rtd DIR 8,6 4096 2 / perl 22569 www-data txt REG 8,6 10336 162220 /usr/bin/perl perl 22569 www-data mem REG 8,6 26936 170219 /usr/lib/perl/5.10.0/auto/Socket/Socket.so perl 22569 www-data mem REG 8,6 22808 170214 /usr/lib/perl/5.10.0/auto/IO/IO.so perl 22569 www-data mem REG 8,6 39112 145112 /lib/libcrypt-2.9.so perl 22569 www-data mem REG 8,6 1502512 145124 /lib/libc-2.9.so perl 22569 www-data mem REG 8,6 130151 145113 /lib/libpthread-2.9.so perl 22569 www-data mem REG 8,6 542928 145122 /lib/libm-2.9.so perl 22569 www-data mem REG 8,6 14608 145125 /lib/libdl-2.9.so perl 22569 www-data mem REG 8,6 1503704 162222 /usr/lib/libperl.so.5.10.0 perl 22569 www-data mem REG 8,6 135680 145116 /lib/ld-2.9.so perl 22569 www-data 0r FIFO 0,6 157216 pipe perl 22569 www-data 1w FIFO 0,6 197642 pipe perl 22569 www-data 2w FIFO 0,6 197642 pipe perl 22569 www-data 3w FIFO 0,6 197642 pipe perl 22569 www-data 4u IPv4 383991 TCP outsidesoftware.com:56869->server12.34.56.78.live-servers.net:www (ESTABLISHED) My gut feeling is outsidesoftware.com is also under attacK? Or possibly being used as a tunnel. I've managed to find a number of rouge files in /tmp and /var/tmp, here is a brief output of one of these files: #!/usr/bin/perl # this spreader is coded by xdh # xdh@xxxxxxxxxxx # only for testing... my @nickname = ("vn"); my $nick = $nickname[rand scalar @nickname]; my $ircname = $nickname[rand scalar @nickname]; #system("kill -9 `ps ax |grep httpdse |grep -v grep|awk '{print $1;}'`"); my $processo = '/usr/sbin/sshd'; The full file contents can be viewed here: http://pastebin.com/yenFRrGP Im trying to achieve a couple of things here... Firstly i need to stop these processes from running. Either by disabling outbound SSH or any IP Tables rules etc... these scripts have been running for around 36 hours now and my main concern is to stop these things running and respawning by themselves. Secondly i need to try and source where and how these scripts have been installed. If anybody has any advise on what to look for in access logs or anything else i would be really grateful. Thanks in advance

    Read the article

  • ufw portforwarding to virtualbox guest

    - by user85116
    My goal is to be able to connect using remote desktop on my desktop machine, to windows xp running in virtualbox on my linux server. My setup: server = debian squeeze, 64 bit, with a public IP address (host) virtualbox-ose 3.2.10 (from debian repo) windows xp running inside VBox as a guest; bridged networking mode in VBox, ip = 192.168.1.100 ufw as the firewall on debian, 3 ports are opened: 22 / ssh, 80 / apache, and 3389 for remote desktop My problem: If I try to use remote desktop on my home computer, I am unable to connect to the windows guest. If I first "ssh -X -C" into the debian server, then run "rdesktop 192.168.1.100", I am able to connect without issue. The windows firewall was configured to allow remote desktop connections, and I've even turned it off (as it is redundant here) to see if that was the problem but it made no difference. Since I am able to connect from inside the local subnet, I suspect that I have not setup my debian firewall correctly to handle connections from outside the LAN. Here is what I've done... First my ufw status: ufw status Status: active To Action From -- ------ ---- 22 ALLOW Anywhere 80 ALLOW Anywhere 3389 ALLOW Anywhere I edited /etc/ufw/sysctl.conf and added: net/ipv4/ip_forward=1 Edited /etc/default/ufw and added: DEFAULT_FORWARD_POLICY="ACCEPT" Edited /etc/ufw/before.rules and added: # setup port forwarding to forward rdp to windows VM *nat :PREROUTING - [0:0] -A PREROUTING -i eth0 -p tcp --dport 3389 -j DNAT --to-destination 192.168.1.100 -A PREROUTING -i eth0 -p udp --dport 3389 -j DNAT --to-destination 192.168.1.100 COMMIT # Don't delete these required lines, otherwise there will be errors *filter <snip> Restarted the firewall etc., but no connection. My log files on the debian host show this (my public ip address was removed for this posting but it is correct in the actual log): Feb 6 11:11:21 localhost kernel: [171991.856941] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:21 localhost kernel: [171991.856963] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856701] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856723] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856656] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856678] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Although this is the current setup / configuration, I've also tried several variations of this; I thought maybe the ISP would be blocking 3389 for some reason and tried using different ports, but again there was no connection. Any ideas...? Did I forget to modify some file somewhere?

    Read the article

  • SQL Server (2012 Enterprise) Browser service failing

    - by Watki02
    SQL Server (2012 Enterprise) Browser service failing I have a problem as described below: I have an instance of SQL Server 2012 Enterprise (thanks to MSDN) for local development on my PC. I try to start SQL server Browser Service from SQL Server Configuration Manager and it takes a long time to fail, then fails with: The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details. I checked event logs and found these errors in this order (all within the same 1-second time frame): The SQL Server Browser service port is unavailable for listening, or invalid. The SQL Server Browser service was unable to establish SQL instance and connectivity discovery. The SQL Server Browser is enabling SQL instance and connectivity discovery support. The SQL Server Browser service was unable to establish Analysis Services discovery. The SQL Server Browser service has started. The SQL Server Browser service has shutdown. I checked firewall rules and both port 1433 (TCP) and 1434 (UDP) are wide open, just as well - the programs and service binary had been "allowed through windows firewall". I started the "Analysis Services" service by hand and it works fine. Browser still won't start. Some History: Installed SQL 2008 R2 express advanced Installed SQL2012 Express advanced Uninstalled SQL 2008 R2 express advanced Installed 2012 SSDT and lots of features with Express install Installed a unique instance of SQL 2012 Enterprise with all features Uninstalled SSDT and reinstalled SSDT with Enterprise (solved a different problem) Uninstalled SQL 2012 Express Uninstalled SQL 2012 Enterprise Removed anything with "SQL" in the name from Control panel "Programs and features" Installed SQL 2012 Enterprise without Analysis services (This is where I noticed SQL Browser service was failing to start even on the install) Added the feature of Analysis Services (and everything else) via the installer (Browser continued to fail to start on the install) ======================== Other interesting facts: opening a command window with administrator and trying to run sqlbrowser.exe manually yielded: Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Windows\system32cd C:\Program Files (x86)\Microsoft SQL Server\90\Shared C:\Program Files (x86)\Microsoft SQL Server\90\Sharedsqlbrowser.exe -c SQLBrowser: starting up in console mode SQLBrowser: starting up SSRP redirection service SQLBrowser: failed starting SSRP redirection services -- shutting down. SQLBrowser: starting up OLAP redirection service SQLBrowser: Stopping the OLAP redirector C:\Program Files (x86)\Microsoft SQL Server\90\Shared As I try to repair the install it errors out saying The following error has occurred: Service 'SQLBrowser' start request failed. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F9BEA51%25400xD3BEBD98%25401211%25401 Clicking retry fails every time. When clicking cancel I get: The following error has occurred: SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Starting the SQL Server Browser service 'SQLBrowser', and waiting for up to '900' seconds for the process to complete. . For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F9BEA51%25400xD3BEBD98%25401211%25401 When I go to uninstall the SQL Browser from "Programs and Features", it complains: Error opening installation log file. Verify that the specified log file location exists and is writable. Is there any way I can fix this short of re-imaging my computer and reinstalling from scratch? A possible approach would be to somehow really uninstall everything and delete all files related to SQL... is that a good idea, and how do I do that?

    Read the article

  • Can't launch glassfish on ec2 - can't open port

    - by orange80
    I'm trying to start glassfish on an EBS-based AMI of Ubuntu 10.04 64-bit. I have used glassfish on non-ec2 servers with no problems, but on ec2 I get this message: $ sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4848 -- it probably is another instance of a GlassFish server. Command start-domain failed. I know that ec2 has requires that firewall rules be modified using ec2-authorize to let outside traffic thru the firewall, as I had to do to make ssh work. This still doesn't explain the port error when all I'm trying to do is start glassfish so I can try $ wget localhost:8080and make sure it's working. This is very frustrating and I'd really appreciate any help. Thanks. FINAL UPDATE: Sorry if you came here looking for answers. I never figured out what was causing the problem. I created another fresh instance, installed the same stuff, and Glassfish worked perfectly. Something obviously got boned during installation, but I have no idea what. I guess it will remain a mystery. UPDATE: Here's what I get from netstat: # netstat -nuptl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 462/sshd tcp6 0 0 :::22 :::* LISTEN 462/sshd udp 0 0 0.0.0.0:5353 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:1194 0.0.0.0:* 589/openvpn udp 0 0 0.0.0.0:37940 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 377/dhclient3 UPDATE: One more thing... I know that the "net.ipv6.bindv6only" kernel option can cause problems with java networking, so I did set this: # sysctl -w net.ipv6.bindv6only=0 UPDATE: I also verified that it has nothing at all to do with the port number (4848). As you can see here, when I changed the admin-listener port in domain.xml to 4949, I get a similar message: # sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4949 -- it probably is another instance of a GlassFish server. Command start-domain failed. UPDATE: Here are the contents of /etc/hosts: 127.0.0.1 localhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I should mention that I have another Ubuntu Lucid 10.04 64-bit slice that is NOT hosted on ec2, and set it up the exact same way with no problems whatsoever. Also server.log doesn't offer much insight either: # cat ./server.log Nov 20, 2010 8:46:49 AM com.sun.enterprise.admin.launcher.GFLauncherLogger info INFO: JVM invocation command line: /usr/lib/jvm/java-6-sun-1.6.0.22/bin/java -cp /opt/glassfishv3/glassfish/modules/glassfish.jar -XX:+UnlockDiagnosticVMOptions -XX:MaxPermSize=192m -XX:NewRatio=2 -XX:+LogVMOutput -XX:LogFile=/opt/glassfishv3/glassfish/domains/domain1/logs/jvm.log -Xmx512m -client -javaagent:/opt/glassfishv3/glassfish/lib/monitor/btrace-agent.jar=unsafe=true,noServer=true -Dosgi.shell.telnet.maxconn=1 -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -Dfelix.fileinstall.dir=/opt/glassfishv3/glassfish/modules/autostart/ -Djavax.net.ssl.keyStore=/opt/glassfishv3/glassfish/domains/domain1/config/keystore.jks -Dosgi.shell.telnet.port=6666 -Djava.security.policy=/opt/glassfishv3/glassfish/domains/domain1/config/server.policy -Dfelix.fileinstall.poll=5000 -Dcom.sun.aas.instanceRoot=/opt/glassfishv3/glassfish/domains/domain1 -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dosgi.shell.telnet.ip=127.0.0.1 -Djava.endorsed.dirs=/opt/glassfishv3/glassfish/modules/endorsed:/opt/glassfishv3/glassfish/lib/endorsed -Dcom.sun.aas.installRoot=/opt/glassfishv3/glassfish -Djava.ext.dirs=/usr/lib/jvm/java-6-sun-1.6.0.22/lib/ext:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/ext:/opt/glassfishv3/glassfish/domains/domain1/lib/ext -Dfelix.fileinstall.bundles.new.start=true -Djavax.net.ssl.trustStore=/opt/glassfishv3/glassfish/domains/domain1/config/cacerts.jks -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Djava.security.auth.login.config=/opt/glassfishv3/glassfish/domains/domain1/config/login.conf -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dfelix.fileinstall.debug=1 -Dorg.glassfish.web.rfc2109_cookie_names_enforced=false -Djava.library.path=/opt/glassfishv3/glassfish/lib:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64/server:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64:/usr/lib/jvm/java-6-sun-1.6.0.22/lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib com.sun.enterprise.glassfish.bootstrap.ASMain -domainname domain1 -asadmin-args start-domain,,,domain1 -instancename server -verbose false -debug false -asadmin-classpath /opt/glassfishv3/glassfish/modules/admin-cli.jar -asadmin-classname com.sun.enterprise.admin.cli.AsadminMain -upgrade false -domaindir /opt/glassfishv3/glassfish/domains/domain1 -read-stdin true

    Read the article

  • Port forwarding DD-WRT

    - by Pawel
    Hi, I'am runing locally service on port 81 (192.168.1.101) I would like to access server from outside MY.WAN.IP.ADDR:81. Everything is working fine on my local network, However can't access it from outside. Below iptables rules on the router. I am using dd-wrt and asus rt-n16 (everything is setup through standard port range forwarding in dd-wrt ) It might be something obvious, but I don't have any experience with routing. Any help will be really appreciated. Thanks. #iptables -t nat -vnL Chain PREROUTING (policy ACCEPT 1285 packets, 148K bytes) pkts bytes target prot opt in out source destination 3 252 DNAT icmp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR to:192.168.1.1 5 300 DNAT tcp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR tcp dpt:81 to:192.168.1.101 0 0 DNAT udp -- * * 0.0.0.0/0 MY.WAN.IP.ADDR udp dpt:81 to:192.168.1.101 298 39375 TRIGGER 0 -- * * 0.0.0.0/0 MY.WAN.IP.ADDR TRIGGER type:dnat match:0 relate:0 Chain POSTROUTING (policy ACCEPT 7 packets, 433 bytes) pkts bytes target prot opt in out source destination 747 91318 SNAT 0 -- * vlan2 0.0.0.0/0 0.0.0.0/0 to:MY.WAN.IP.ADDR 0 0 RETURN 0 -- * br0 0.0.0.0/0 0.0.0.0/0 PKTTYPE = broadcast Chain OUTPUT (policy ACCEPT 86 packets, 5673 bytes) pkts bytes target prot opt in out source destination # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP tcp -- anywhere anywhere tcp dpt:webcache DROP tcp -- anywhere anywhere tcp dpt:www DROP tcp -- anywhere anywhere tcp dpt:https DROP tcp -- anywhere anywhere tcp dpt:69 DROP tcp -- anywhere anywhere tcp dpt:ssh DROP tcp -- anywhere anywhere tcp dpt:ssh DROP tcp -- anywhere anywhere tcp dpt:telnet DROP tcp -- anywhere anywhere tcp dpt:telnet Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT 0 -- anywhere anywhere TCPMSS tcp -- anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU lan2wan 0 -- anywhere anywhere ACCEPT 0 -- anywhere anywhere state RELATED,ESTABLISHED logaccept tcp -- anywhere pawel-ubuntu tcp dpt:81 logaccept udp -- anywhere pawel-ubuntu udp dpt:81 TRIGGER 0 -- anywhere anywhere TRIGGER type:in match:0 relate:0 trigger_out 0 -- anywhere anywhere logaccept 0 -- anywhere anywhere state NEW Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain advgrp_1 (0 references) target prot opt source destination Chain advgrp_10 (0 references) target prot opt source destination Chain advgrp_2 (0 references) target prot opt source destination Chain advgrp_3 (0 references) target prot opt source destination Chain advgrp_4 (0 references) target prot opt source destination Chain advgrp_5 (0 references) target prot opt source destination Chain advgrp_6 (0 references) target prot opt source destination Chain advgrp_7 (0 references) target prot opt source destination Chain advgrp_8 (0 references) target prot opt source destination Chain advgrp_9 (0 references) target prot opt source destination Chain grp_1 (0 references) target prot opt source destination Chain grp_10 (0 references) target prot opt source destination Chain grp_2 (0 references) target prot opt source destination Chain grp_3 (0 references) target prot opt source destination Chain grp_4 (0 references) target prot opt source destination Chain grp_5 (0 references) target prot opt source destination Chain grp_6 (0 references) target prot opt source destination Chain grp_7 (0 references) target prot opt source destination Chain grp_8 (0 references) target prot opt source destination Chain grp_9 (0 references) target prot opt source destination Chain lan2wan (1 references) target prot opt source destination Chain logaccept (3 references) target prot opt source destination ACCEPT 0 -- anywhere anywhere Chain logdrop (0 references) target prot opt source destination DROP 0 -- anywhere anywhere Chain logreject (0 references) target prot opt source destination REJECT tcp -- anywhere anywhere tcp reject-with tcp-reset Chain trigger_out (1 references) target prot opt source destination #iptables -vnL FORWARD Chain FORWARD (policy ACCEPT 130 packets, 5327 bytes) pkts bytes target prot opt in out source destination 15 900 ACCEPT 0 -- br0 br0 0.0.0.0/0 0.0.0.0/0 390 20708 TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU 182K 130M lan2wan 0 -- * * 0.0.0.0/0 0.0.0.0/0 179K 129M ACCEPT 0 -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 logaccept tcp -- * * 0.0.0.0/0 192.168.1.101 tcp dpt:81 0 0 logaccept udp -- * * 0.0.0.0/0 192.168.1.101 udp dpt:81 0 0 TRIGGER 0 -- vlan2 br0 0.0.0.0/0 0.0.0.0/0 TRIGGER type:in match:0 relate:0 2612 768K trigger_out 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 2482 762K logaccept 0 -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW

    Read the article

  • Initial Cisco ASA 5510 Config

    - by Brendan ODonnell
    Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

    Read the article

  • Intelligent "Subtraction" of one text logfile from another

    - by Vi
    Example: Application generates large text log file A with many different messages. It generates similarly large log file B when does not function correctly. I want to see what messages in file B are essentially new, i.e. to filter-out everything from A. Trivial prototype is: Sort | uniq both files Join files sort | uniq -c grep -v "^2" This produces symmetric difference and inconvenient. How to do it better? (including non-symmetric difference and preserving of messages order in B) Program should first analyse A and learn which messages are common, then analyse B showing with messages needs attention. Ideally it should automatically disregard things like timestamps, line numbers or other volatile things. Example. A: 0:00:00.234 Received buffer 0x324234 0:00:00.237 Processeed buffer 0x324234 0:00:00.238 Send buffer 0x324255 0:00:03.334 Received buffer 0x324255 0:00:03.337 Processeed buffer 0x324255 0:00:03.339 Send buffer 0x324255 0:00:05.171 Received buffer 0x32421A 0:00:05.173 Processeed buffer 0x32421A 0:00:05.178 Send buffer 0x32421A B: 0:00:00.134 Received buffer 0x324111 0:00:00.137 Processeed buffer 0x324111 0:00:00.138 Send buffer 0x324111 0:00:03.334 Received buffer 0x324222 0:00:03.337 Processeed buffer 0x324222 0:00:03.338 Error processing buffer 0x324222 0:00:03.339 Send buffer 0x3242222 0:00:05.271 Received buffer 0x3242FA 0:00:05.273 Processeed buffer 0x3242FA 0:00:05.278 Send buffer 0x3242FA 0:00:07.280 Send buffer 0x3242FA failed Result: 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed One of ways of solving it can be something like that: Split each line to logical units: 0:00:00.134 Received buffer 0x324111,0:00:00.134,Received,buffer,0x324111,324111,Received buffer, \d:\d\d:\d\d\.\d\d\d, \d+:\d+:\d+.\d+, 0x[0-9A-F]{6}, ... It should find individual words, simple patterns in numbers, common layouts (e.g. "some date than text than number than text than end_of_line"), also handle combinations of above. As it is not easy task, user assistance (adding regexes with explicit "disregard that","make the main factor","don't split to parts","consider as date/number","take care of order/quantity of such messages" rules) should be supported (but not required) for it. Find recurring units and "categorize" lines, filter out too volatile things like timestamps, addresses or line numbers. Analyse the second file, find things that has new logical units (one-time or recurring), or anything that will "amaze" the system which has got used to the first file. Example of doing some bit of this manually: $ cat A | head -n 1 0:00:00.234 Received buffer 0x324234 $ cat A | egrep -v "Received buffer" | head -n 1 0:00:00.237 Processeed buffer 0x324234 $ cat A | egrep -v "Received buffer|Processeed buffer" | head -n 1 0:00:00.238 Send buffer 0x324255 $ cat A | egrep -v "Received buffer|Processeed buffer|Send buffer" | head -n 1 $ cat B | egrep -v "Received buffer|Processeed buffer|Send buffer" 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed This is a boring thing (there are a lot of message types); also I can accidentally include some too broad pattern. Also it can't handle complicated things like interrelation between messages. I know that it is AI-related. May be there are already developed tools?

    Read the article

  • PPTP connection fails with errors 800/806

    - by Mark S. Rasmussen
    I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

    Read the article

  • Excel: conditionally format a cell using the format of another, content-matching cell

    - by Eric A. Meyer
    I have an Excel spreadsheet where I’d like to be able to create a “key” of formatted cells with unique values, and then in another sheet format cells using the key formatting. So for example, my key is as follows, with one value per cell and the visual formatting indicated in parentheses: A (red background) B (green background) C (blue background) So that’s on one sheet (or in a remote corner of the current sheet—whichever is better). Then, in an area that I mark for conditional formatting, I can type one of those three letters and have the cell where I typed it visually formatted according to the key. So if I type a “B” into one of the conditionally formatted cells, it gets a green background. (Note that I’m using backgrounds here solely for ease of explanation: ideally I want to have all visual formatting copied over, whether it’s foreground color, background color, font weight, borders, or whatever. But I’ll take what I can get, obviously.) And—just to make it extra-tricky—if I change the formatting in the key, that change should be reflected in cells that reference the key. Thus, if I change the “B” formatting in the key from a green background to a purple background, any “B” in the main sheet should switch to the new color. Similarly, it should be possible to add or remove values from the key and have those changes applied to the main data set. I’m okay with the formatting-update-on-key-change being triggered by clicking a button or something. I suspect that if any of this is possible it will require VBA, but I’ve never used it so I’ve no idea where to start if that’s the case. I’m hoping it’s possible without VBA. I know it’s possible to just use multiple conditional formats, but my use case here is that I’m trying to create the above-described capability for someone who isn’t conversant with conditional formatting. I’d like to let them be able to define a key, update it if necessary, and keep on truckin’ without me having to rewrite the spreadsheet’s formatting rules for them. --- UPDATE --- So I think I was a bit unclear about my original request. Let me try again with an image. The image shows the “key” on the left, where values and styles are defined using keyboard and mouse input. On the right, you see the data that should be formatted to match the key. Thus if I type a “C” into a cell in the Data area, it should be blue-backed. Furthermore, if I change the formatting of “C” in the Key to have a purple background, all the “C” cells should switch from blue to purple. For further craziness, if I add more to the Key (say, “D” with a yellow background) then any “D” cells will be styled to match; if I remove a Key entry, then matching values in the Data area should revert to default styling. So. Is that more clear? Is it possible, in whole or in part? I don’t have to use conditional formatting for this; in fact, at this point I suspect I probably shouldn’t. But I’m open to any approach!

    Read the article

  • Network Restructure Method for Double-NAT network

    - by Adrian
    Due to a series of poor network design decisions (mostly) made many years ago in order to save a few bucks here and there, I have a network that is decidedly sub-optimally architected. I'm looking for suggestions to improve this less-than-pleasant situation. We're a non-profit with a Linux-based IT department and a limited budget. (Note: None of the Windows equipment we have runs does anything that talks to the Internet nor do we have any Windows admins on staff.) Key points: We have a main office and about 12 remote sites that essentially double NAT their subnets with physically-segregated switches. (No VLANing and limited ability to do so with current switches) These locations have a "DMZ" subnet that are NAT'd on an identically assigned 10.0.0/24 subnet at each site. These subnets cannot talk to DMZs at any other location because we don't route them anywhere except between server and adjacent "firewall". Some of these locations have multiple ISP connections (T1, Cable, and/or DSLs) that we manually route using IP Tools in Linux. These firewalls all run on the (10.0.0/24) network and are mostly "pro-sumer" grade firewalls (Linksys, Netgear, etc.) or ISP-provided DSL modems. Connecting these firewalls (via simple unmanaged switches) is one or more servers that must be publically-accessible. Connected to the main office's 10.0.0/24 subnet are servers for email, tele-commuter VPN, remote office VPN server, primary router to the internal 192.168/24 subnets. These have to be access from specific ISP connections based on traffic type and connection source. All our routing is done manually or with OpenVPN route statements Inter-office traffic goes through the OpenVPN service in the main 'Router' server which has it's own NAT'ing involved. Remote sites only have one server installed at each site and cannot afford multiple servers due to budget constraints. These servers are all LTSP servers several 5-20 terminals. The 192.168.2/24 and 192.168.3/24 subnets are mostly but NOT entirely on Cisco 2960 switches that can do VLAN. The remainder are DLink DGS-1248 switches that I am not sure I trust well enough to use with VLANs. There is also some remaining internal concern about VLANs since only the senior networking staff person understands how it works. All regular internet traffic goes through the CentOS 5 router server which in turns NATs the 192.168/24 subnets to the 10.0.0.0/24 subnets according to the manually-configured routing rules that we use to point outbound traffic to the proper internet connection based on '-host' routing statements. I want to simplify this and ready All Of The Things for ESXi virtualization, including these public-facing services. Is there a no- or low-cost solution that would get rid of the Double-NAT and restore a little sanity to this mess so that my future replacement doesn't hunt me down? Basic Diagram for the main office: These are my goals: Public-facing Servers with interfaces on that middle 10.0.0/24 network to be moved in to 192.168.2/24 subnet on ESXi servers. Get rid of the double NAT and get our entire network on one single subnet. My understanding is that this is something we'll need to do under IPv6 anyway, but I think this mess is standing in the way.

    Read the article

  • How to access remote lan machines through a ipsec / xl2ptd vpn (maybe iptables related)

    - by Simon
    I’m trying to do the setup of a IPSEC / XL2TPD VPN for our office, and I’m having some problems accessing the remote local machines after connecting to the VPN. I can connect, and I can browse Internet sites trough the VPN, but as said, I’m unable to connect or even ping the local ones. My Network setup is something like this: INTERNET eth0 ROUTER / VPN eth2 LAN These are some traceroutes behind the VPN: traceroute to google.com (173.194.78.94), 64 hops max, 52 byte packets 1 192.168.1.80 (192.168.1.80) 74.738 ms 71.476 ms 70.123 ms 2 10.35.192.1 (10.35.192.1) 77.832 ms 77.578 ms 77.865 ms 3 10.47.243.137 (10.47.243.137) 78.837 ms 85.409 ms 76.032 ms 4 10.47.242.129 (10.47.242.129) 78.069 ms 80.054 ms 77.778 ms 5 10.254.4.2 (10.254.4.2) 86.174 ms 10.254.4.6 (10.254.4.6) 85.687 ms 10.254.4.2 (10.254.4.2) 85.664 ms traceroute to 192.168.1.3 (192.168.1.3), 64 hops max, 52 byte packets 1 * * * 2 *traceroute: sendto: No route to host traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 * traceroute: sendto: Host is down 3 traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 These are my iptables rules: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT # allow lan to router traffic iptables -A INPUT -s 192.168.1.0/24 -i eth2 -j ACCEPT # ssh iptables -A INPUT -p tcp --dport ssh -j ACCEPT # vpn iptables -A INPUT -p 50 -j ACCEPT iptables -A INPUT -p ah -j ACCEPT iptables -A INPUT -p udp --dport 500 -j ACCEPT iptables -A INPUT -p udp --dport 4500 -j ACCEPT iptables -A INPUT -p udp --dport 1701 -j ACCEPT # dns iptables -A INPUT -s 192.168.1.0/24 -p tcp --dport 53 -j ACCEPT iptables -A INPUT -s 192.168.1.0/24 -p udp --dport 53 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE # logging iptables -I INPUT 5 -m limit --limit 1/min -j LOG --log-prefix "iptables denied: " --log-level 7 # block all other traffic iptables -A INPUT -j DROP And here are some firewall log lines: Dec 6 11:11:57 router kernel: [8725820.003323] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=192.168.1.3 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=62174 PROTO=UDP SPT=61910 DPT=53 LEN=40 Dec 6 11:12:29 router kernel: [8725852.035826] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=15344 PROTO=UDP SPT=56329 DPT=8612 LEN=24 Dec 6 11:12:36 router kernel: [8725859.121606] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11767 PROTO=UDP SPT=63962 DPT=8612 LEN=24 Dec 6 11:12:44 router kernel: [8725866.203656] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11679 PROTO=UDP SPT=57101 DPT=8612 LEN=24 Dec 6 11:12:51 router kernel: [8725873.285979] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=39165 PROTO=UDP SPT=62625 DPT=8612 LEN=24 I’m pretty sure that the problem should be related with iptables, but after trying a lot of different confs, I was unable to find the right one. Any help will be greetly appreciated ;). Kind regards, Simon. EDIT: This is my route table: default 62.43.193.33.st 0.0.0.0 UG 100 0 0 eth0 62.43.193.32 * 255.255.255.224 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.81 * 255.255.255.255 UH 0 0 0 ppp0

    Read the article

  • nginx 502 Bad Gateway on every external site

    - by Leandros
    I just installed nginx and followed the guides on the official site, to set it up with php5-fpm, but it just won't work. Not even the default site, without php is working outside of my server. Tried listen = 127.0.0.1:7777 and listen = /var/run/php5-fpm.sock Both don't work. I can access http://localhost with lynx on my server, but not from somewhere else (with external ip obviously). Yes, the php5-fpm deamons are running, yes the port (80 and 7777) is opened. Don't work with php-cgi as well. My config: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_buffers 16 16k; proxy_buffer_size 32k; fastcgi_buffers 16 16k; fastcgi_buffer_size 32k; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; } Server config: (symlinked to sites-enabled) server { server_name skilloverflow.de *.skilloverflow.de; root /var/www/blog.skilloverflow.de/htdocs; index index.php; error_log /var/log/nginx/skilloverflow.error.log; access_log /var/log/nginx/skilloverflow.access.log; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; if (!-f $document_root$fastcgi_script_name) { return 404; } fastcgi_pass 127.0.0.1:7777; fastcgi_index index.php; include fastcgi_params; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } } PHP Version: 5.4.17-1 nginx version: 1.2.1 Debian 6.0.7 Linux 2.6.32 Edit: Lighttpd is still installed, does that matter? It's not running though. Edit 2: No error or access log is generated. They're all empty.

    Read the article

  • simple and reliable centralized logging inside Amazon VPC

    - by Nakedible
    I need to set up centralized logging for a set of servers (10-20) in an Amazon VPC. The logging should be as to not lose any log messages in case any single server goes offline - or in the case that an entire availability zone goes offline. It should also tolerate packet loss and other normal network conditions without losing or duplicating messages. It should store the messages durably, at the minimum on two different EBS volumes in two availability zones, but S3 is a good place as well. It should also be realtime so that the messages arrive within seconds of their generation to two different availability zones. I also need to sync logfiles not generated via syslog, so a syslog-only centralized logging solution would not fulfill all the needs, although I guess that limitation could be worked around. I have already reviewed a few solutions, and I will list them here: Flume to Flume to S3: I could set up two logservers as Flume hosts which would store log messages either locally or in S3, and configure all the servers with Flume to send all messages to both servers, using the end-to-end reliability options. That way the loss of a single server shouldn't cause lost messages and all messages would arrive in two availability zones in realtime. However, there would need to be some way to join the logs of the two servers, deduplicating all the messages delivered to both. This could be done by adding a unique id on the sending side to each message and then write some manual deduplication runs on the logfiles. I haven't found an easy solution to the duplication problem. Logstash to Logstash to ElasticSearch: I could install Logstash on the servers and have them deliver to a central server via AMQP, with the durability options turned on. However, for this to work I would need to use some of the clustering capable AMQP implementations, or fan out the deliver just as in the Flume case. AMQP seems to be a yet another moving part with several implementations and no real guidance on what works best this sort of setup. And I'm not entirely convinced that I could get actual end-to-end durability from logstash to elasticsearch, assuming crashing servers in between. The fan-out solutions run in to the deduplication problem again. The best solution that would seem to handle all the cases, would be Beetle, which seems to provide high availability and deduplication via a redis store. However, I haven't seen any guidance on how to set this up with Logstash and Redis is one more moving part again for something that shouldn't be terribly difficult. Logstash to ElasticSearch: I could run Logstash on all the servers, have all the filtering and processing rules in the servers themselves and just have them log directly to a removet ElasticSearch server. I think this should bring me reliable logging and I can use the ElasticSearch clustering features to share the database transparently. However, I am not sure if the setup actually survives Logstash restarts and intermittent network problems without duplicating messages in a failover case or similar. But this approach sounds pretty promising. rsync: I could just rsync all the relevant log files to two different servers. The reliability aspect should be perfect here, as the files should be identical to the source files after a sync is done. However, doing an rsync several times per second doesn't sound fun. Also, I need the logs to be untamperable after they have been sent, so the rsyncs would need to be in append-only mode. And log rotations mess things up unless I'm careful. rsyslog with RELP: I could set up rsyslog to send messages to two remote hosts via RELP and have a local queue to store the messages. There is the deduplication problem again, and RELP itself might also duplicate some messages. However, this would only handle the things that log via syslog. None of these solutions seem terribly good, and they have many unknowns still, so I am asking for more information here from people who have set up centralized reliable logging as to what are the best tools to achieve that goal.

    Read the article

  • DNS Server Behind NAT

    - by Bryan
    I've got a Bind 9 DNS server sitting behind a NAT firewall, assume the Internet facing IP is 1.2.3.4 There are no restrictions on outgoing traffic, and port 53 (TCP/UDP) is forwarded from 1.2.3.4 to the internal DNS server (10.0.0.1). There are no IP Tables rules on either the VPS or the internal Bind 9 server. From a remote Linux VPS located elsewhere on the internet, nslookup works fine # nslookup foo.example.com 1.2.3.4 Server: 1.2.3.4 Address: 1.2.3.4#53 Name: foo.example.com Addresss: 9.9.9.9 However, when using the host command on the remote VPS, I receive the following output: # host foo.example.com 1.2.3.4 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; reply from unexpected source: 1.2.3.4#13731, expected 1.2.3.4#53 ;; connection timed out; no servers could be reached. From the VPS, I can establish a connection (using telnet) to 1.2.3.4:53 From the internal DNS server (10.0.0.1), the host command appears to be fine: # host foo.example.com 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: foo.example.com has address 9.9.9.9 Any suggestions as to why the host command on my VPS is complaining about the reply coming back from another port, and what can I do to fix this? Further info: From a windows host external to the network >nslookup foo.example.com 1.2.3.4 DNS request timeout timeout was 2 seconds Server: UnKnown Address: 1.2.3.4 DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds DNS request timed out. timeout was 2 seconds *** Request to UnKnown timed-out This is a default install of bind from Ubuntu 12.04 LTS, with around 11 zones configured. $ named -v BIND 9.8.1-P1 TCP Dump (filtered) from internal DNS server 20:36:29.175701 IP pc.external.com.57226 > dns.example.com.domain: 1+ PTR? 4.3.2.1.in-addr.arpa. (45) 20:36:29.175948 IP dns.example.com.domain > pc.external.com.57226: 1 Refused- 0/0/0 (45) 20:36:31.179786 IP pc.external.com.57227 > dns.example.com.domain: 2+[|domain] 20:36:31.179960 IP dns.example.com.domain > pc.external.com.57227: 2 Refused-[|domain] 20:36:33.180653 IP pc.external.com.57228 > dns.example.com.domain: 3+[|domain] 20:36:33.180906 IP dns.example.com.domain > pc.external.com.57228: 3 Refused-[|domain] 20:36:35.185182 IP pc.external.com.57229 > dns.example.com.domain: 4+ A? foo.example.com. (45) 20:36:35.185362 IP dns.example.com.domain > pc.external.com.57229: 4*- 1/1/1 (95) 20:36:37.182844 IP pc.external.com.57230 > dns.example.com.domain: 5+ AAAA? foo.example.com. (45) 20:36:37.182991 IP dns.example.com.domain > pc.external.com.57230: 5*- 0/1/0 (119) TCP Dump from client during query 21:24:52.054374 IP pc.external.com.43845 > dns.example.com.53: 6142+ A? foo.example.com. (45) 21:24:52.104694 IP dns.example.com.29242 > pc.external.com.43845: UDP, length 95

    Read the article

  • can't login to new install of SQL 2008 x64 via SSMS

    - by tpcolson
    I have performed a fresh install of SQL 2008 x64 on a fresh install of Server 2008 R2 x64 in an AD environment. Upon install completion, I cannot login to the SQL Instance via SSMS, with the following error: Login failed for user domain\user. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]. Background: the server is correctly joined to the AD Domain, the install was performed with defaults, windows authentication only (per organizational rules), the SQL install completes with no errors, domain\user was added as SQL Amin during setup account provisioning, I am logged into to console as domain\user when this error occurs, windows firewall is OFF, UAC is ON (an will never be turned off in accordance with organizational policy). To troubleshoot this error I have tried: Run SSMS as administrator: fail; Start SQL in single user mode, run SSMS: fail Start SQL in single user mode, run SSMS as administrator: Success Start SQL in single user mode, run SSMS as administrator, remove domain\user from sysadmin group, re-add, run SSMS: fail; Any combination and permutation of log off and log on, reboot, and chant gregorian prayers: fail; Reimage server with 2008 x64, slipstream SP2 into SQL 2008 install, all above troubleshooting steps are repeatable exactly, so I've narrowed this down to not being a SP issue; (this is NOT 2008 SQL R2) Any suggestion on how to grant management access to this fresh install of SQL 2008 via SSMS? Our organizational policy is no console access to servers, management will be done via management tools intalled on client workstations. domain\user is a group of 8 users whom will have SSMS installed on workstations. However, we can't even access SQL via SSMS from the console! We cannot deploy this in an environment where these 8 users will have to sneak into the server closet on the weekends and have console access to SQL and run SSMS as administrator. EDIT: domain\group is a replacement for the actual object; the queries indicate that domain\group does indeed have the right privelges....!?! 1> EXEC xp_logininfo 'domain\group' go account name type privilege mapped login name permission path 'domain\group' group admin 'domain\group' NULL xp_logininfo seems to show 'domain\group' in the sql admin group; 1> SELECT A.name AS 'Role', B.name AS 'Login' 3> FROM sys.server_role_members C 5> INNER JOIN sys.server_principals A ON A.principal_id = C.role_principal_id 7> INNER JOIN sys.server_principals B ON B.principal_id = C.member_principal _id 9> go Role Login sysadmin sa sysadmin NT AUTHORITY\SYSTEM sysadmin NT SERVICE\MSSQLSERVER sysadmin NT SERVICE\SQLSERVERAGENT sysadmin domain\group 1> SELECT PRINCIPAL_ID AS [Principal ID], 2> NAME AS [User], 3> TYPE_DESC AS [Type Description], 4> IS_DISABLED AS [Status] 5> FROM sys.server_principals 6> GO Principal ID User Type Description Status ------------ ------------------------------------------------------------------- ------------------------------------------------------------- ------------------ ------------------------------------------ ------ 1 sa SQL_LOGIN 1 2 public SERVER_ROLE 0 3 sysadmin SERVER_ROLE 0 4 securityadmin SERVER_ROLE 0 5 serveradmin SERVER_ROLE 0 6 setupadmin SERVER_ROLE 0 7 processadmin SERVER_ROLE 0 8 diskadmin SERVER_ROLE 0 9 dbcreator SERVER_ROLE 0 10 bulkadmin SERVER_ROLE 0 101 ##MS_SQLResourceSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 102 ##MS_SQLReplicationSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 103 ##MS_SQLAuthenticatorCertificate## CERTIFICATE_MAPPED _LOGIN 0 105 ##MS_PolicySigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 257 ##MS_PolicyTsqlExecutionLogin## SQL_LOGIN 1 259 NT AUTHORITY\SYSTEM WINDOWS_LOGIN 0 260 NT SERVICE\MSSQLSERVER WINDOWS_GROUP 0 262 NT SERVICE\SQLSERVERAGENT WINDOWS_GROUP 0 263 ##MS_PolicyEventProcessingLogin## SQL_LOGIN 1 264 ##MS_AgentSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 265 domain\group WINDOWS_GROUP 0 (21 rows affected)

    Read the article

  • Does ModSecurity 2.7.1 work with ASP.NET MVC 3?

    - by autonomatt
    I'm trying to get ModSecurity 2.7.1 to work with an ASP.NET MVC 3 website. The installation ran without errors and looking at the event log, ModSecurity is starting up successfully. I am using the modsecurity.conf-recommended file to set the basic rules. The problem I'm having is that whenever I am POSTing some form data, it doesn't get through to the controller action (or model binder). I have SecRuleEngine set to DetectionOnly. I have SecRequestBodyAccess set to On. With these settings, the body of the POST never reaches the controller action. If I set SecRequestBodyAccess to Off it works, so it's definitely something to do with how ModSecurity forwards the body data. The ModSecurity debug shows the following (looks to me as if all passed through): Second phase starting (dcfg 94b750). Input filter: Reading request body. Adding request argument (BODY): name "[0].IsSelected", value "on" Adding request argument (BODY): name "[0].Quantity", value "1" Adding request argument (BODY): name "[0].VariantSku", value "047861" Adding request argument (BODY): name "[1].Quantity", value "0" Adding request argument (BODY): name "[1].VariantSku", value "047862" Input filter: Completed receiving request body (length 115). Starting phase REQUEST_BODY. Recipe: Invoking rule 94c620; [file "*********************"] [line "54"] [id "200001"]. Rule 94c620: SecRule "REQBODY_ERROR" "!@eq 0" "phase:2,auditlog,id:200001,t:none,log,deny,status:400,msg:'Failed to parse request body.',logdata:%{reqbody_error_msg},severity:2" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against REQBODY_ERROR. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 5549c38; [file "*********************"] [line "75"] [id "200002"]. Rule 5549c38: SecRule "MULTIPART_STRICT_ERROR" "!@eq 0" "phase:2,auditlog,id:200002,t:none,log,deny,status:44,msg:'Multipart request body failed strict validation: PE %{REQBODY_PROCESSOR_ERROR}, BQ %{MULTIPART_BOUNDARY_QUOTED}, BW %{MULTIPART_BOUNDARY_WHITESPACE}, DB %{MULTIPART_DATA_BEFORE}, DA %{MULTIPART_DATA_AFTER}, HF %{MULTIPART_HEADER_FOLDING}, LF %{MULTIPART_LF_LINE}, SM %{MULTIPART_MISSING_SEMICOLON}, IQ %{MULTIPART_INVALID_QUOTING}, IP %{MULTIPART_INVALID_PART}, IH %{MULTIPART_INVALID_HEADER_FOLDING}, FL %{MULTIPART_FILE_LIMIT_EXCEEDED}'" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against MULTIPART_STRICT_ERROR. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 554bd70; [file "********************"] [line "80"] [id "200003"]. Rule 554bd70: SecRule "MULTIPART_UNMATCHED_BOUNDARY" "!@eq 0" "phase:2,auditlog,id:200003,t:none,log,deny,status:44,msg:'Multipart parser detected a possible unmatched boundary.'" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against MULTIPART_UNMATCHED_BOUNDARY. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 554cbe0; [file "*********************************"] [line "94"] [id "200004"]. Rule 554cbe0: SecRule "TX:/^MSC_/" "!@streq 0" "phase:2,log,auditlog,id:200004,t:none,deny,msg:'ModSecurity internal error flagged: %{MATCHED_VAR_NAME}'" Rule returned 0. Hook insert_filter: Adding input forwarding filter (r 5541fc0). Hook insert_filter: Adding output filter (r 5541fc0). Initialising logging. Starting phase LOGGING. Recording persistent data took 0 microseconds. Audit log: Ignoring a non-relevant request. I can't see anything unusual in Fiddler. I'm using a ViewModel in the parameters of my action. No data is bound if SecRequestBodyAccess is set to On. I'm even logging all the Request.Form.Keys and values via log4net, but not getting any values there either. I'm starting to wonder if ModSecurity actually works with ASP.NET MVC or if there is some conflict with the ModSecurity http Module and the model binder kicking in. Does anyone have any suggestions or can anyone confirm they have ModSecurity working with an ASP.NET MVC website?

    Read the article

  • Inconsistent file downloads of (what should be) the same file

    - by Austin A.
    I'm working on a system that archives large collections of timetstamped images. Part of the system deals with saving an image to a growing .zip file. This morning I noticed that the log system said that an image was successfully downloaded and placed in the zip file, but when I downloaded the .zip (from an apache alias running on our server), the images didn't match the log. For example, although the log said that camera 3484 captured on January 17, 2011, when I download from the apache alias, the downloaded zip file only contains images up to January 14. So, I sshed onto the server, and unzipped the file in its own directory, and that zip file has images from January 14 to today (January 17). What strikes me as odd is that this should be the exact same file as the one I downloaded from the apache alias. Other experiments: I scp-ed the file from the server to my local machine, and the zip file has the newer images. But when I use an SCP client (in this case, Fugu for OSX), I get the zip file for the older images. In short: unzipping a file on the server or after downloading through scp or after downloading through wget gives one zip file, but unzipping a file from Chrome, Firefox, or SCP client gives a different zip file, when they should be exactly the same. Unzipping on the server... [user@server ~]$ cd /export1/amos/images/2011/84/3484/00003484/ [user@server 00003484]$ ls -la total 6180 drwxr-sr-x 2 user groupname 24 Jan 17 11:20 . drwxr-sr-x 4 user groupname 36 Jan 11 19:58 .. -rw-r--r-- 1 user groupname 6309980 Jan 17 12:05 2011.01.zip [user@server 00003484]$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg extracting: 20110114_143554.jpg replace 20110114_143554.jpg? [y]es, [n]o, [A]ll, [N]one, [r]ename: y extracting: 20110114_143554.jpg extracting: 20110114_153458.jpg (...bunch of files...) extracting: 20110117_170459.jpg extracting: 20110117_173458.jpg extracting: 20110117_180501.jpg Using the wget through apache alias. local:~ user$ wget http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip --12:38:13-- http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip => `2011.01.zip' Resolving example.com... ip.ip.ip.ip Connecting to example.com|ip.ip.ip.ip|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 6,327,747 (6.0M) [application/zip] 100% [=====================================================================================================>] 6,327,747 1.03M/s ETA 00:00 12:38:56 (143.23 KB/s) - `2011.01.zip' saved [6327747/6327747] local:~ user$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg (... same as before...) extracting: 20110117_183459.jpg Using scp to grab the zip local:~ user$ scp user@server:/export1/amos/images/2011/84/3484/00003484/2011.01.zip . 2011.01.zip 100% 6179KB 475.3KB/s 00:13 local:~ user$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg (...same as before...) extracting: 20110117_183459.jpg Using Fugu to download 2011.01.zip from /export1/amos/images/2011/84/3484/00003484/ gives images 20110113_090457.jpg through 201100114_010554.jpg Using Firefox to download 2011.01.zip from http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip gives images 20110113_090457.jpg through 201100114_010554.jpg Using Chrome gives same results as Firefox. Relevant section from apache httpd.conf: # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" Alias /zipfiles/ /export1/amos/images/

    Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >