Search Results

Search found 7007 results on 281 pages for 'third party'.

Page 190/281 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

  • Feedback from SQLBits 8

    - by Peter Larsson
    This years SQLBits occurred in Brighton. Although I didn’t have the opportunity to attend the full conference, I did a presentation at Saturday. Getting to Brighton was easy. Drove to Copenhagen airport at 0415, flew 0605 and arrived at Gatwick 0735. Then I took the direct train to Brighton and showed up at 0830, just one hour before presenting. This was the easy part. Getting home was much worse. Presentation ended at 1030 and I had to rush to the train station to get back to London, change to tube for Heathrow. Made it at the gate just 15 seconds before closing. That included a half mile run in the airport… Anyway, yesterday I got the feedback for my presentation. It does look good, especially since English is not my first language. This is the first graph Seems to be just halfway between conference average and best session. I can live with that. Second graph shows more detail about attendees voting. It also look acceptable. A wider spread for the 9’s, but it is an inevitable effect from how attendees percept the session. I did get a lot of 8’s and the lower grades in an descending order. The two people voting 4 and 5 didn’t say why they voted this so I don’t know how to remedy this. Third graph is about each category of votes.   Again, I find this acceptable. The Session abstract and Speaker’s knowledge seems to follow attendees expectations compared to conference average. I seem to have met the attendees expectations (and some more) for the other four categories, also compared to conference average. Since this did encourage me, I believe I will present some more at future meetings. I do have a new presentation about something all developers are doing every day but they may not know it. I will also cover this new topic in the next Deep Dives II book. Stay tuned! //Peter

    Read the article

  • Speaker Notes...

    - by wulfers
    At a .Net User Group meeting this week, I experienced two poorly prepared speakers floundering through presentations….  As a Lead Technologist at the company I work for, I have experience training technical staff and also giving presentations at code camps.  Here are a few guidelines for aspiring speakers you might find helpful…   1.       Do not stand in front of your audience and read your slides.  This is  offensive to your audience and not what they came for...  Your slides are there to reinforce the information you are presenting and to give the audience a little clarification on some terms you may use and as a visual aid for some complicated issues. 2.       Have someone review your presentation (slides, notes, …) who speaks the language you will be presenting in fluently.  Also record at least ten minutes of your presentation and have that same person review that.  One of the speakers this week used the word “Basically” fifty times in less than thirty minutes…  I started to flinch every time he used the term. 3.       Be Prepared  -  before the presentation begins.  Don’t make any last minute changes to your presentation or demo code the night before.  Don’t patch your laptop or demo servers the night before.  If possible create a virtual image that you only use for presentations and use that (refreshed before every presentation). 4.       Know the level of expertise of your audience.  Speaking above or below their abilities will make or break your presentation. 5.       Deliver what you promise. The presentation this week was supposed to be on BDD (Behavior Driven Develpment).  The presenter completely ran off track and 90% of the discussion was how his team mistakenly used TDD (Test Driven Development), and was unhappy with the results.  Based on his loss of focus we only heard a rushed 10 minute presentation on DBB which was a disservice to the audience. 6.       Practice your presentation with your own small team before you try this on a room full of people you don’t know.  A side benefit of doing this with your own team is that you can get candid feedback from your team and also get kudos for training your own team.  I find I can also turn my presentations into technical white papers and get a third benefit from the work I’ve put into a presentation. 7.       Sharpen your own saw.  Pick a topic that is fairly current.  Something you would like to learn about and would benefit your current career path. 8.       Have fun doing it.

    Read the article

  • JavaOne 2012: Camel, Twitter, Coherence, Wicket and GlassFish

    - by Bruno.Borges
    Before joining Oracle as Product Manager for WebLogic and GlassFish for Latin America, at the beggining of this year I proposed two talks to JavaOne USA that I had been presenting in Brazil for quite a while. One of them I presented last year at ApacheCon in Vancouver, Canada as well in JavaOne Brazil. In June I got the news that they were accepted as Alternate Sessions. Surprisingly enough, few weeks later and at the same time I joined Oracle, I received the news that they were officially accepted and put on schedule. Tomorrow I'll be flying to San Francisco, to my first JavaOne in the United States, and I wanted to share with you what I'm going to present there. My two sessions are these ones: Wed, 10/03, 4:30pm - CON2989 Leverage Enterprise Integration Patterns with Apache Camel and TwitterOn this one, you will be introducted to the Apache Camel framework that I had been talking about in Brazil at conferences, before joining Oracle, and to a component I contributed to integrate with Twitter. Also, you will have a preview of a new component I've been working on to integrate Camel with the Oracle Coherence distributed cache. Thu, 10/04, 3:30pm - CON3395 How Scala, Wicket, and Java EE Can Improve Web DevelopmentThis one I've been working on for quite a while. It was based on an idea to have an architecture that could be as agile as frameworks and technologies such as Ruby on Rails, PHP or Python, for rapid web development. You will be introduced to the Apache Wicket framework, another Apache project I enjoy working with and gave lots of talks at Brazilian conferences, including JavaOne Brazil, JustJava, QCon SP, and The Developers Conference. You will also be introduced to the Scala language and how to create nice DSLs to boost productiveness. And last but not least, the Java EE 6 platform, that offers an awesome improvement from previous versions with its CDI, JPA, EJB3 and JAX-RS features for web development. Other events I will be participating during my stay in SF: Geeks Bike Ride GlassFish Community Event GlassFish and Friends Party    If you have any other event to suggest, please do suggest! It's my first JavaOne and I'm really looking forward to enjoying everything. See you guys in a few days!!

    Read the article

  • Oracle Could Lead In Cloud Business Apps Within Year

    - by Richard Lefebvre
    Below is the reprint from an article, writen by By Pete Barlas, Investor's Business Daily, published on Investorscom: Oracle (ORCL) is all but destined to become the largest seller of cloud business-software applications, analysts say, and perhaps within a year. What that means in the long run is much debated, though, as analysts aren't sure whether pricing competition might cut into profit or what other issues might develop in the fast-emerging cloud software field. But the database leader, which is either No. 1 or 2 to SAP (SAP) in business apps overall, simply has the size and scope to overtake current cloud business-app leader, Salesforce.com (CRM), analysts say. Oracle rolled out its first full suite of cloud applications on June 6. Cloud computing lets companies store data and apps on the Internet "cloud" and access it quickly and easily. The applications run the gamut of customer relationship management software to social networking sites for employees, partners and customers. For longtime software giants like Oracle, the cloud is a big switch. They get the great bulk of revenue from companies and other enterprises buying or licensing software that the customers keep on their own computer systems. Vendors also get annual maintenance fees. Analysts estimate Oracle is taking in a mere $1 billion or so a year from cloud-based software sales and services now. But while that's just a sliver of the company's $37 billion in sales last year, it's already about a third of the total sales for Salesforce, which is expected to end this year with some $3 billion in revenue. Operates In 145 Countries Oracle operates in more than 145 countries vs. about 70 for Salesforce. And Oracle has far more apps than Salesforce. Revenue doesn't equate to profit, but it's inevitable that huge Oracle will become the largest seller of cloud applications, says Trip Chowdhry, an analyst for Global Equities Research. "What Oracle has is global presence," he said. "They have two things driving the revenue: breadth of the offering and breadth of the distribution. You put those applications in those sales reps' hands and you get deployments not in just one country but several countries." At the June 6 event, Oracle CEO Larry Ellison emphasized that his company could and would beat Salesforce.com in head-to-head battles for customers. Oracle makes software to help companies manage such tasks as customer relationships, recruiting, supply chains, projects, finances and more. That range gives it an edge over all rivals, says Michael Fauscette, an analyst for research firm IDC.

    Read the article

  • SOA &amp; Application Grid Specialization step 3 of 6 &ndash; Education Competence Center

    - by Jürgen Kress
    SOA & Application Grid Specialization step 3 of 6 – education competence center Dear Team In our fist step to become SOA Specialized & Application Grid Specialized we highlighted our OMM system to register your opportunities. In our second step we featured our marketing activities to create your reference cases and run joint marketing campaigns. In the third step we will focus on the education criteria: SOA Sales assessment & SOA Pre-Sales assessment & Support assessment. Steps: Login to Oracle Partner Network (support for login contact Partner Business Centers) Go to the OPN Competence Center Select the Oracle Service-Oriented Architecture 11g Sales Specialist (3 persons required) Click the play button to run the assessment Select the Oracle Service-Oriented Architecture 11g PreSales Specialist (3 persons required) Click the play button to run the assessment Select the Oracle Technology Support Specialist (1 person required) Click the play button to run the assessment Tips: · You can run the assessments as often as you like. After each try you will see your current score and correct answers to the questions. · During your next team meeting reserve an hour to become specialized jointly. · For the fist 5 partners who contact us we will order a pizza service to ensure the success of your team meeting! · We want your feedback to improve the assessments. If you find an ambiguous question or one with wrong context or even wrong answers, send us your feedback. The first 5 partners who will send us feedback will get a free competence center coffee cup! If you need to get an Oracle Partner Network Account please contact our Partner Business Centers.   For more information on Specialization please visit our OPN Specialized Webcast Series And become a member in our SOA Partner Community for registration please visit www.oracle.com/goto/ema/soa Jürgen Kress, SOA Partner Adoption EMEA Thanks for your efforts to become Specialized! SOA Specialized Application Grid Specialized Proof 2 transactions with OMM Proof 2 transactions with OMM Create your 2 references Create your 2 references SOA Sales assessment 3, Application Grid Sales Specialist 3 SOA Pre-Sales assessment 3 Application Grid PreSales Specialist 3 Support assessment 1 Support assessment 2 SOA Implementation assessment 4 Application Grid Implementation assessment 4 Technorati Tags: soa specialization Oracle Partner Network SOA Partner Community

    Read the article

  • JavaOne Session Report - Java ME SDK 3.2

    - by Janice J. Heiss
    Oracle Product Manager for Java ME SDK, Sungmoon Cho, presented a session, "Developing Java Mobile and Embedded Applications with Java ME SDK 3.2,” wherein he covered the basic new features of the Java ME Platform SDK 3.2, a state-of-the-art toolbox for developing mobile and embedded applications. The session began with a summary of the four main components of Java ME SDK. A device emulator allows developers to quickly run and test applications before commercialization. It supports CLDC/MIDP CLDC/IMP.NG and CLC/AGUI. A development environment assists writing, running debugging and deploying and enables on-device debugging. Samples provide developers with useful codes and frameworks. IDE Plugins – NetBeans and Eclipse – equip developers with CPU Profiler, Memory Monitor, Network Monitor, and Device Selector. This means that manual integration is no longer necessary. Cho then talked about the Java ME SDK’s on-device tooling architecture: * Java ME SDK provides an architecture ideal for on-device-debugging.* Device Manager plays the central role by managing different devices whether it is the emulator or a device that Oracle provides or recommends or a third party device as long as the devices have a Java Runtime that supports the protocol that is designated.* The Emulator provides an accurate emulation, since it uses the same code base used in Oracle’s Java ME runtime.* The Universal Emulator Interface (UEI) makes it easy for IDEs to detect the platform.He then focused on the Java ME SDK release highlights, which include: * Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. A full emulation for the runtime is provided.* Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). This is a new profile for embedded devices. * A new Custom Device Skin Creator.* An Eclipse plugin for CLDC/MIDP.* Profiling, Network monitoring, and Memory monitoring are now integrated with the NetBeans profiling tools.* Java ME SDK Update CenterCho summarized the main features: IDE Integration (NetBeans and Eclipse) enables developers to write, run, profile, and debug their applications on their favorite IDE. CPU ProfilerThis enables developers to more quickly detect the hot spot and where CPU time is being used. They can double click the method to jump directly into the source code.Memory Monitor Developers can monitor objects and memory usage in real time.Debugger on the Emulator and DeviceDevelopers can run their applications step by step, and inspect the variables to pinpoint the problem. The debugging can take place either on the emulator or the device.Embedded Application DevelopmentIMP-NG, Device Access, Logging, and AMS API Support are now available.On-Device ToolingConnect your device to your computer, and run and debug the application right on your device.Custom Device Skin CreatorDefine your own device and test on an environment that is closest to your target device. The informative session concluded with a demo that showed more concretely how to apply the new features in Java ME SDK 3.2.

    Read the article

  • Two New CRM USER Communities just launched

    - by Divya Malik
    Here comes an announcement from Chris Gallen, from our Support Services team. For those of you who are EBS CRM users, here are two new recently launched communities that are now available to discuss topics that are important to you. These communities are for Sales & Marketing and  Telesales  The Sales & Marketing community is open to discuss a wide range of topics from Oracle Sales, Sales Online, Territory Management, Partner Management, Leads Management, Sales Offline, Sales for Handhelds, Sales Foundation, and Oracle Marketing. Some possible topics include Oracle Sales Implementations, TCA and DQM Integrations, Territory Management Setups and Definitions, Product Catalog Integrations, Sales Forecasting, Lead and Opportunity management, Sales Manager and Sales User responsibilities and Reports, Resource Management including Roles and Groups, Oracle Sales Personalizations, Concurrent Requests for Sales Reps and Sales Manager Dashboards, Integration with Quoting, Proposals, General Ledger, Advanced Product Catalog, CRM Resource Administration, etc. The Telesales community is available to discuss topics such as Customer/Org/Person/Party Relationships, TCA/DQM Integration, Lead and Opportunity Management, Universal Work Queue, Universal Search Features, Purchase Items/Product Integration, eBusiness Center Setup Issues, Interactions, Tasks and Notes Integrations, and Form Personalizations. How Can You Get Started? Here are the two ways to get engaged. A) Click here to access all our communities  OR B) My Oracle Support as follows: Log into My Oracle Support (Flash or Classic).                                                                                                                           Click the "Community" link at the top of the page. Click [Enter Here] on the following page. Select the community from the "My Communities" list on the top-left. Take advantage TODAY!

    Read the article

  • Innovation for Retailers

    - by David Dorf
    One of my main objectives for this blog is to point out emerging technologies and how they might apply to the retail industry.  But ideas are just the beginning; retailers either have to rely on vendors or have their own lab to explore these ideas and see which ones work.  (A healthy dose of both is probably the best solution.)  The Nordstrom Innovation Lab is a fine example of dedicating resources to cultivate ideas and test prototypes. The video below, from 2011, is a case study in which the team builds an iPad app that helps customers purchase sunglasses in the store.  Customers take pictures of themselves wearing different sunglasses, then can do side-by-side comparisons. There are a few interesting take-aways from their process.  First, they are working in the store alongside employees and customers.  There's no concept of documenting all the requirements then building the product.  Instead, they work closely with those that will be using the app in order to fully understand what's needed.  When they find an issue, they change the software onsite and try again.  This iterative prototyping ensures their product hits the mark.  Feels like Extreme Programming if you recall that movement. Second, they have time-boxed the project to one week.  Either it works or it doesn't, and either way they've only expended a week's worth of resources.  Innovation always entails failure, and those that succeed are often good at detecting failure quickly then adjusting.  Fail fast and fail often. Third, its not always about technology.  I was impressed they used paper designs to walk through user stories and help understand the needs of the customer.  Pen and paper is the innovator's most powerful tool. Our Retail Applied Research (RAR) team uses some of these concepts in our development process.  (Calling it a process is probably overkill.)  We try to give life to concepts quickly so the rest of organization can help us decide if we're heading the right direction.  It takes many failures before finding a successful product.

    Read the article

  • Summit 2014 Registration Is Open

    - by KemButller
    Attention Oracle (employees) Field Team and Oracle JD Edwards Partners REGISTRATION IS NOW OPEN for Oracle's 5th Annual JD Edwards Summit - Monday, January 27th through Friday, January 31st, 2014, in Broomfield, Colorado. The theme of this year's Summit is "Success Through Continued Innovation”.  Our goals are to update you on our current and future product roadmap, new products, selling strategies for new prospects, growing the footprint in our JD Edwards install base, as well as providing a venue for networking.  The JD Edwards Summit is to the selling and servicing community what COLLABORATE is to the user community.  This is a MUST ATTEND event if you recommend, sell, implement and/or support the JD Edwards product, whether you are new to JD Edwards or a seasoned pro, an executive, account executive, in presales or in consulting.  The Summit promises a content-rich and unique networking experience for all attendees. Highlights include:  Monday afternoon kicks off the Summit with a variety of workshops as well as an afternoon preview of the Sponsor Showcase.  Start your networking at the Summit kickoff party Monday evening. Tuesday morning features several informative keynotes in the Summit General Assembly followed by key messages delivered in Super Sessions in the afternoon, focused on each of the JD Edwards community audiences. The educational offerings continue on Wednesday and Thursday with over 90 breakout sessions on topics spanning technology, applications (core JD Edwards, Edge, Fusion), Sales, Presales and Implementation. Friday concludes with new workshops for the implementation community.A Attendees will be enriched with numerous opportunities to network with fellow partners and Oracle throughout the week.  Consider bringing your team and using this venue to hold your own organization kickoff meeting prior to or post Summit. Contact Sheila Ebbitt (Sheila.ebbitt@oracle-DOT-com) for further assistance with your planning.  Attendees will be charged a Summit fee of US$ 250. Online registration cut-off is January 17, 2014. All registration requests after that time will be processed on-site at the event with an attendee fee of US$ 500. Please contact Rene Chapman (rene.chapman@oracle-DOT-com) for information on sponsorship opportunities. For further details on the JD Edwards Summit including agenda, workshops, educational sessions, lodging,  sponsors and Summit registration, click here! Register now! This is going to be an awesome event! John Schiff Vice President JD Edwards Business Development 

    Read the article

  • problem in repairing software center

    - by REGZEN
    what should be done regarding this error(software center) - installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. this error is repeating whenever i am repairing software center. I'm having problems with my software center .. when i want to install some package that following message it appears "items cannot be installed or removed until the package catalog is repaired. do you want to repair it now?" after i click Repair, another window pops up, saying : "Package operation fails - The installation or removal of a software package failed" I click repair, and a few seconds later, it pops up again!!!! no matter how many times i click repair, nothing happens. Also .. I've Another Problem With Update Manager That Shows Me The Following Message: " the package system is broken. Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f" also, i tried sudo apt-get install -f i got this error... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) Please provide a solution

    Read the article

  • SMTP POP3 & PST. Acronyms from Hades.

    - by mikef
    A busy SysAdmin will occasionally have reason to curse SMTP. It is, certainly, one of the strangest events in the history of IT that such a deeply flawed system, designed originally purely for campus use, should have reached its current dominant position. The explanation was that it was the first open-standard email system, so SMTP/POP3 became the internet standard. We are, in consequence, dogged with a system with security weaknesses so extreme that messages are sent in plain text and you have no real assurance as to who the message came from anyway (SMTP-AUTH hasn't really caught on). Even without the security issues, the use of SMTP in an office environment provides a management nightmare to all commercial users responsible for complying with all regulations that control the conduct of business: such as tracking, retaining, and recording company documents. SMTP mail developed from various Unix-based systems designed for campus use that took the mail analogy so literally that mail messages were actually delivered to the users, using a 'store and forward' mechanism. This meant that, from the start, the end user had to store, manage and delete messages. This is a problem that has passed through all the releases of MS Outlook: It has to be able to manage mail locally in the dreaded PST file. As a stand-alone system, Outlook is flawed by its neglect of any means of automatic backup. Previous Outlook PST files actually blew up without warning when they reached the 2 Gig limit and became corrupted and inaccessible, leading to a thriving industry of 3rd party tools to clear up the mess. Microsoft Exchange is, of course, a server-based system. Emails are less likely to be lost in such a system if it is properly run. However, there is nothing to stop users from using local PSTs as well. There is the additional temptation to load emails into mobile devices, or USB keys for off-line working. The result is that the System Administrator is faced by a complex hybrid system where backups have to be taken from Servers, and PCs scattered around the network, where duplication of emails causes storage issues, and document retention policies become impossible to manage. If one adds to that the complexity of mobile phone email readers and mail synchronization, the problem is daunting. It is hardly surprising that the mood darkens when SysAdmins meet and discuss PST Hell. If you were promoted to the task of tormenting the souls of the damned in Hades, what aspects of the management of Outlook would you find most useful for your task? I'd love to hear from you. Cheers, Michael

    Read the article

  • Collision detection doesn't work for automated elements in XNA 4.0

    - by NDraskovic
    I have a really weird problem. I made a 3D simulator of an "assembly line" as a part of a college project. Among other things it needs to be able to detect when a box object passes in front of sensor. I tried to solve this by making a model of a laser and checking if the box collides with it. I had some problems with BoundingSpheres of models meshes so I simply create a BoundingSphere and place it in the same place as the model. I organized them into a list of BoundingSpheres called "spheres" and for each model I create one BoundingSphere. All models except the box are static, so the box object has its own BoundingSphere (not a member of the "spheres" list). I also implemented a picking algorithm that I use to start the movement. This is the code that checks for collision: if (spheres.Count != 0) { for (int i = 1; i < spheres.Count; i++) { if (spheres[i].Intersects(PickingRay) != null && Microsoft.Xna.Framework.Input.ButtonState.Pressed == Mouse.GetState().LeftButton) { start = true; break; } if (BoxSphere.Intersects(spheres[i]) && start) { MoveBox(0, false);//The MoveBox function receives the direction (0) and a bool value that dictates whether the box should move or not (false means stop) start = false; break; } if (start /*&& Microsoft.Xna.Framework.Input.ButtonState.Pressed == Mouse.GetState().LeftButton*/ && !BoxSphere.Intersects(spheres[i])) { MoveBox(0, true); break; } } The problem is this: When I use the mouse to move the box (the commented part in the third if condition) the collision works fine (I have another part of code that I removed to simplify my question - it calculates the "address" of the box, and by that number I know that the collision is correct). But when I comment it (like in this example) the box just passes trough the lasers and does not detect the collision (the idea is that the box stops at each laser and the user passes it forth by clicking on the appropriate "switch"). Can you see the problem? Please help, and if you need more informations I will try to give them. Thanks

    Read the article

  • Interaction of a GUI-based App and Windows Service

    - by psubsee2003
    I am working on personal project that will be designed to help manage my media library, specifically recordings created by Windows Media Center. So I am going to have the following parts to this application: A Windows Service that monitors the recording folder. Once a new recording is completed that meets specific criteria, it will call several 3rd party CLI Applications to remove the commercials and re-encode the video into a more hard-drive friendly format. A controller GUI to be able to modify settings of the service, specifically add new shows to watch for, and to modify parameters for the CLI Applications A standalone (GUI-based) desktop application that can perform many of the same functions as the windows service, expect manually on specific files instead of automatically based on specific criteria. (It should be mentioned that I have limited experience with an application of this complexity, and I have absolutely zero experience with Windows Services) Since the 1st and 3rd bullet share similar functionality, my design plan is to pull the common functionality into a separate library shared by both parts applications, but these 2 components do not need to interact otherwise. The 2nd and 3rd bullets seem to share some common functionality, both will have a GUI, both will have to help define similar parameters (one to send to the service and the other to send directly to the CLI applications), so I can see some advantage to combining them into the same application. On the other hand, the standalone application (bullet #3) really does not need to interact with the service at all, except for possibly sharing a few common default parameters that can easily be put into an XML in a common location, so it seems to make more sense to just keep everything separate. The controller GUI (2nd bullet) is where I am stuck at the moment. Do I just roll this functionality (allow for user interaction with the service to update settings and criteria) into the standalone application? Or would it be a better design decision to keep them separate? Specifically, I'm worried about adding the complexity of communicating with the Windows Service to the standalone application when it doesn't need it. Is WCF the right approach to allow the controller GUI to interact with the Windows Service? Or is there a better alternative? At the moment, I don't envision a need for a significant amount of interaction, maybe just adding a new task once in a while and occasionally tweaking a parameter, but when something is changed, I do expect the windows service to immediately use the new settings.

    Read the article

  • MySQL Connector/Net 6.6.4 RC1 has been released

    - by fernando
    MySQL Connector/Net 6.6.4, a new version of the all-managed .NET driver  for MySQL has been released.  This is the Release Candidate intended to introduce users to the new features in the release.  This release is feature complete it should be stable enough for users to understand the new features and how we expect them to work.  As is the case with all non-GA releases, it should not be used in any production environment.  It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features:   * Stored routine debugging   * Entity Framework 4.3 Code First support   * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver).   * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense&  the Stored Routine debugger. The following specific fixes are addressed in this version: - Fixed Entity Framework + mysql connector/net in partial trust throws exceptions (MySql bug #65036, Oracle bug #14668820). - Added support in Parser for Datetime and Time types with precision when using Server 5.6 (No bug Number). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). The release is available to download athttp://dev.mysql.com/downloads/connector/net/6.6.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html For specific topics: Stored Routine Debugger:http://dev.mysql.com/doc/refman/5.5/en/connector-net-visual-studio-debugger.html Authentication plugin:http://dev.mysql.com/doc/refman/5.5/en/connector-net-programming-authentication-user-plugin.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

    Read the article

  • Android - Force Close - Null Pointer on Canvas?

    - by user22241
    Please bear with me. I have a very odd problem. Basically, my app so far, has 3 activities (a main splash screen, an 'options/menu' screen and the main app). If I follow the very specific steps oulined below, I get a 'null pointer exception' in the 2nd activity) and the app force closes...... Here are the steps: Start the app (a game based on Surfaceview), tap through to the third activity so the game is running, then hit the home key so the game is paused and put to the background, the activity/app is ended through DDMS in the SDK then restarted on the device (all OK so far), now if I hit the back key on the device twice in quick succession, it happens. All other sequence of events is fine, even to the point of pressing the back key, waiting for the previous activity to show, then hitting back again - all OK. Only when the back key is pressed twice in quick succession following all the above steps does the problem occur. I'm assuming that the canvas isn't ready as it's showing as 'null' when this happens, but I'm not sure why this is happening as surely it's happening when I'm trying to go back to activity 1, but the logcat shows the error in activity 2. if I stop the activity running my 'doDraw' method (which referenced the canvas), then all is OK - so I can safely assume it is the canvas causing the problem. Also, if I skip my first activity (which is a very basic full-screen button which just displays a splashscreen and waits for the user to tap the screen), and make my 2nd activity the launch activity, again, it is OK. this is the part of the code that I think is probably relevant: @Override public void surfaceChanged(SurfaceHolder arg0, int arg1, int arg2, int arg3) { vheight = this.getHeight(); vwidth = this.getWidth(); } @Override public void surfaceCreated(SurfaceHolder holder) { vheight = this.getHeight(); vwidth = this.getWidth(); this.viewWidth = vwidth; this.viewHeight = vheight; if (runthread==false){ if (preThread.getState()==Thread.State.TERMINATED){ preThread = new OptionsThread(thisholder, thiscontext, thishandler); } preThread.setRunning(true); preThread.start();} } @Override public void surfaceDestroyed(SurfaceHolder holder) { preThread.setRunning(false); //Stop the loop boolean retry = true; //Stop the thread while (retry) { try { preThread.join(); retry = false; } catch (InterruptedException e) { } } Thank you all for any help you can offer

    Read the article

  • Separating logic and data in browser game

    - by Tesserex
    I've been thinking this over for days and I'm still not sure what to do. I'm trying to refactor a combat system in PHP (...sorry.) Here's what exists so far: There are two (so far) types of entities that can participate in combat. Let's just call them players and NPCs. Their data is already written pretty well. When involved in combat, these entities are wrapped with another object in the DB called a Combatant, which gives them information about the particular fight. They can be involved in multiple combats at once. I'm trying to write the logic engine for combat by having combatants injected into it. I want to be able to mock everything for testing. In order to separate logic and data, I want to have two interfaces / base classes, one being ICombatantData and the other ICombatantLogic. The two implementers of data will be one for the real objects stored in the database, and the other for my mock objects. I'm now running into uncertainties with designing the logic side of things. I can have one implementer for each of players and NPCs, but then I have an issue. A combatant needs to be able to return the entity that it wraps. Should this getter method be part of logic or data? I feel strongly that it should be in data, because the logic part is used for executing combat, and won't be available if someone is just looking up information about an upcoming fight. But the data classes only separate mock from DB, not player from NPC. If I try having two child classes of the DB data implementer, one for each entity type, then how do I architect that while keeping my mocks in the loop? Do I need some third interface like IEntityProvider that I inject into the data classes? Also with some of the ideas I've been considering, I feel like I'll have to put checks in place to make sure you don't mismatch things, like making the logic for an NPC accidentally wrap the data for a player. Does that make any sense? Is that a situation that would even be possible if the architecture is correct, or would the right design prohibit that completely so I don't need to check for it? If someone could help me just layout a class diagram or something for this it would help me a lot. Thanks. edit Also useful to note, the mock data class doesn't really need the Entity, since I'll just be specifying all the parameters like combat stats directly instead. So maybe that will affect the correct design.

    Read the article

  • Is this an effective monetization method for an Android game? [on hold]

    - by Matthew Page
    The short version: I plan to make an Android puzzle game where the user tries to get 3-6 numbers to their predetermined goal numbers. The free version of the app will have three predetermined levels (easy, medium, hard). The full version ($0.99, probably) will have a level generator where there will be unlimited easy, medium, or hard levels, as well as a custom difficulty option where users can set specific vales to the number of numbers to equate to their goal, the number of buttons to use, etc. Users will also have the option to get a one-time "hint" for a fee of $0.49, or unlimited hints for a one-time fee of $2.99. The long version: Mechanics of Game and Victory The application is a number puzzle. When the user begins a new game, depending on the input by the user, between 3 and 6 numbers show up on the top of the screen, and between 3 and 6 buttons show up on the bottom of the screen. The buttons all have two options: to increase every number the same way, or decrease every number the same way. The buttons either use addition / subtraction, multiplication / division, or exponents / roots, all depending on the number displayed on the button. Addition buttons are green, multiplication buttons are blue, and exponential buttons are red. The user wins when all of the numbers displayed on the screen equate to their goal number, displayed below each number. Monetization If the user is playing the full (priced) version of the app, upon the start of the game, the user will be confronted with a dialogue asking for the number of buttons and the number of numbers to equate in the game. Then, based on the user input, a random puzzle will be generated. If the user is playing the free version of the app, the user will be asked to either play an “easy”, “hard”, or “expert” puzzle. A pre-determined puzzle from each category will be used in the game. If the user has played that puzzle before, a dialogue will show saying this to the user and advertising the full version of the app. The full version of the app will also be advertised upon the successful or in successful completion of a puzzle. Upon exiting this advertisement, another full screen advertisement will appear from a third party. Also, the solution to the puzzle should be stored by the program, and if the user pays a small fee, he/she can see a hint to the solution to the program. In the free version of the app, the user may use their first hint for free. Also, the user can use unlimited hints for a slightly larger fee. Is this an effective monetization method?

    Read the article

  • JCP.next.3: time to get to work

    - by Patrick Curran
    As I've previously reported in this blog, we planned three JSRs to improve the JCP’s processes and to meet our members’ expectations for change. The first - JCP.next.1, or more formally JSR 348: Towards a new version of the Java Community Process - was completed in October 2011. This focused on a small number of simple but important changes to make our process more transparent and to enable broader participation. We're already seeing the benefits of these changes as new and existing JSRs adopt the new requirements. However, because we wanted to complete this JSR quickly we deliberately postponed a number of more complex items, including everything that would require modifying the JSPA (the legal agreement that members sign when they join the organization) to a follow-on JSR. The second JSR (JSR 355: JCP Executive Committee Merge) is in progress now and will complete later this year. This JSR is even simpler than the first, and is focused solely on merging the two Executive Committees into one for greater efficiency and to encourage synergies between the Java ME and Java SE platforms. Continuing the momentum to move Java and the JCP forward we have just filed the third JSR (JCP.next.3) as JSR 358: A major revision of the Java Community Process. This JSR will modify the JSPA as well as the Process Document, and will tackle a large number of complex issues, many of them postponed from JSR 348. For these reasons we expect to spend a considerable amount of time working on it - at least a year, and probably more. The current version of the JSPA was created back in 2002, although some minor changes were introduced in 2005. Since then the organization and the environment in which we operate have changed significantly, and it is now time to revise our processes to ensure that they meet our current needs. We have a long list of topics to be considered, including the role of independent implementations (those not derived from the Reference Implementation), licensing and open source, ensuring that our new transparency requirements are implemented correctly, compatibility policy and TCKs, the role of individual members, patent policy, and IP flow. The Expert Group for JSR 358, as with all process-change JSRs, consists of all members of the Executive Committees. Even though the JSR has just been filed we started discussions on the various topics several months ago (see the EC's meeting minutes for details) and our EC members - including the new members who joined within the last year or two - are actively engaged. Now it's your opportunity to get involved. As required by version 2.8 of our Process (introduced with JSR 348) we will conduct all our business in the open. We have a public java.net project where you can follow and participate in our work. All of our deliberations will be copied to a public Observer mailing list, we'll track our issues on a public Issue Tracker, and all our documents (meeting agendas and minutes, task lists, working drafts) will be published in our Document Archive. We're just getting started, but we do want your input. Please visit us on java.net where you can learn how to participate. Let's get to work...

    Read the article

  • Taking a Projects Development to the Next Level

    - by user1745022
    I have been looking for some advice for a while on how to handle a project I am working on, but to no avail. I am pretty much on my fourth iteration of improving an "application" I am working on; the first two times were in Excel, the third Time in Access, and now in Visual Studio. The field is manufacturing. The basic idea is I am taking read-only data from a massive Sybase server, filtering it and creating much smaller tables in Access daily (using delete and append Queries) and then doing a bunch of stuff. More specifically, I use a series of queries to either combine data from multiple tables or group data in specific ways (aggregate functions), and then I place this data into a table (so I can sort and manipulate data using DAO.recordset and run multiple custom algorithms). This process is then repeated multiple times throughout the database until a set of relevant tables are created. Many times I will create a field in a query with a value such as 1.1 so that when I append it to a table I can store information in the field from the algorithms. So as the process continues the number of fields for the tables change. The overall application consists of 4 "back-end" databases linked together on a shared drive, with various output (either front-end access applications or Excel). So my question is is this how many data driven applications that solve problems essentially work? Each backend database is updated with fresh data daily and updating each takes around 10 seconds (for three) and 2 minutes(for 1). Project Objectives. I want/am moving to SQL Server soon. Front End will be a Web Application (I know basic web-development and like the administration flexibility) and visual-studio will be IDE with c#/.NET. Should these algorithms be run "inside the database," or using a series of C# functions on each server request. I know you're not supposed to store data in a database unless it is an actual data point, and in Access I have many columns that just hold calculations from algorithms in vba. The truth is, I have seen multiple professional Access applications, and have never seen one that has the complexity or does even close to what mine does (for better or worse). But I know some professional software applications are 1000 times better then mine. So Please Please Please give me a suggestion of some sort. I have been completely on my own and need some guidance on how to approach this project the right way.

    Read the article

  • Is it appropriate to try to control the order of finalization?

    - by Strilanc
    I'm writing a class which is roughly analogous to a CancellationToken, except it has a third state for "never going to be cancelled". At the moment I'm trying to decide what to do if the 'source' of the token is garbage collected without ever being set. It seems that, intuitively, the source should transition the associated token to the 'never cancelled' state when it is about to be collected. However, this could trigger callbacks who were only kept alive by their linkage from the token. That means what those callbacks reference might now in the process of finalization. Calling them would be bad. In order to "fix" this, I wrote this class: public sealed class GCRoot { private static readonly GCRoot MainRoot = new GCRoot(); private GCRoot _next; private GCRoot _prev; private object _value; private GCRoot() { this._next = this._prev = this; } private GCRoot(GCRoot prev, object value) { this._value = value; this._prev = prev; this._next = prev._next; _prev._next = this; _next._prev = this; } public static GCRoot Root(object value) { return new GCRoot(MainRoot, value); } public void Unroot() { lock (MainRoot) { _next._prev = _prev; _prev._next = _next; this._next = this._prev = this; } } } intending to use it like this: Source() { ... _root = GCRoot.Root(callbacks); } void TransitionToNeverCancelled() { _root.Unlink(); ... } ~Source() { TransitionToNeverCancelled(); } but now I'm troubled. This seems to open the possibility for memory leaks, without actually fixing all cases of sources in limbo. Like, if a source is closed over in one of its own callbacks, then it is rooted by the callback root and so can never be collected. Presumably I should just let my sources be collected without a peep. Or maybe not? Is it ever appropriate to try to control the order of finalization, or is it a giant warning sign?

    Read the article

  • Applying the Knuth-Plass algorithm (or something better?) to read two books with different length and amount of chapters in parallel

    - by user147133
    I have a Bible reading plan that covers the whole Bible in 180 days. For the most of the time, I read 5 chapters in the Old Testament and 1 or 2 (1.5) chapters in the New Testament each day. The problem is that some chapters are longer than others (for example Psalm 119 which is 7 times longer than a average chapter in the Bible), and the plan I'm following doesn't take that in count. I end up with some days having a lot more to read than others. I thought I could use programming to make myself a better plan. I have a datastructure with a list of all chapters in the bible and their length in number of lines. (I found that the number of lines is the best criteria, but it could have been number of verses or number of words as well) I then started to think about this problem as a line wrap problem. Think of a chapter like a word, a day like a line and the whole plan as a paragraph. The "length" of a word (a chapter) is the number of lines in that chapter. I could then generate the best possible reading plan by applying a simplified Knuth-Plass algorithm to find the best breakpoints. This works well if I want to read the Bible from beginning to end. But I want to read a little from the new testament each day in parallel with the old testament. Of course I can run the Knuth-Plass algorithm on the Old Testament first, then on the New Testament and get two separate plans. But those plans merged is not a optimal plan. Worst-case days (days with extra much reading) in the New Testament plan will randomly occur on the same days as the worst-case days in the Old Testament. Since the New Testament have about 180*1.5 chapters, the plan is generally to read one chapter the first day, two the second, one the third etc... And I would like the plan for the Old Testament to compensate for this alternating length. So I will need a new and better algorithm, or I will have to use the Knuth-Plass algorithm in a way that I've not figured out. I think this could be a interesting and challenging nut for people interested in algorithms, so therefore I wanted to see if any of you have a good solution in mind.

    Read the article

  • How do I prevent ISPs from killing downloads of files in mid-transfer?

    - by Gorchestopher H
    I run a small website with a few users, low traffic, mostly to share personal mp3 files with a small community. Depending on their ISP, my users can't always download or stream larger files. By larger I mean larger than 1MB. Essentially the host either stops sending, or the client stops receiving. One of the links along the connection chain simply ends its connection before the transfer completes Trace-route shows no connection issues. There are no connection issues with short transfers that don't take more than a few seconds. It's these 10 second transfers that just end up ending. Just doing a straight download with a direct link can yield this error if you have the wrong ISP. Strangely enough, this is most common with users with ISPs who are essentially independent providers that buy service via a fiber link. Unfortunately these providers aren't very knowledgeable, are unable to do any testing, and insist it's a problem with the host. I have gotten my host to transfer my site to different servers of their, to the same effect. Nearly identical sites (affiliate sites actually) experience no such issue. What can I be doing to further troubleshoot this matter? How can I prove that someone is dropping the ball, and identify who that party is? Can I do a 5Mb traceroute? EDIT Maybe I can clear up some misconceptions with my question: The files are not very large. They are simply over 2Mb. The users do not have "slow" connections, they are at least 5mbps. This "time out" happens very quickly, in the realm of 5 seconds, so I don't know if it's a timeout or not. The user often gets 1 or 2Mb in this chunk of time. I have tried streaming with a flash player. I have tried saving the target. Forcing the download. I have tried allowing the browser to stream the file. I have tried different browsers (FF, IE, Chrome). Users are able to download identical files when on different hosts.

    Read the article

  • 2d, Top-down map with different levels

    - by Ktash
    So, I'm creating a 2d, top down, sprite based (tiled) game, and right now I'm working on maps (well, a map editor at the moment, but it will be creating my maps, so basically the same thing). The scenario So, I'm thinking about efficiency and creating a map in pieces. In each piece, I plan on having 'layers'. Basically, I plan on rendering it down to a 'below hero' level, and an 'above hero' level, with the hero rendered in between obviously. There will likely also be a 'on level with hero' layer, but I'm not quite there yet. Not even worrying about events or interaction yet. Just looking to get a hero on the screen. Now for movement, I obviously need to know what tiles can be moved and in what direction. My plan at the moment is each tile getting 8 bits (4 'can enter in direction' bits, 4 'can leave in direction'). This will allow me to limit movement and even allow one way directional movement. The dilemma This works great for a lot of scenarios. It will allow me to store a map in essentially 3 layers, a string, and gives me flexibility going forward. However, I can't create maps that themselves have layers. A good example is a bridge where the user can go under or over the bridge without invalid moves being allowed. I can't create a platform and allow movement underneath. These are things I would like to be able to include in my game. My idea In theory, I could allow multiple hero layers and then allow multiple sets of 'below' and 'above' layers (or sandwich layers). But this complicates my system, and makes movement between maps potentially tricky (If the hero is on the third layer at the edge of a map, but that corresponds to the second layer on the other map, how can I allow or disallow movement). My question Is there a better way to manage multiple maps with multiple levels like this where a users level may be 'connected' on different levels on different maps? Or even... Am I doing this the hard way? Is there a more standard way to handle top-down 2d tiled maps that I am just not aware of? Things to note or that might be helpful This will be done in Javascript (transferred around in JSON) State will need to be transferred quickly, so a map-id and x/y/direction should be enough to get me a boolean 'can move' value Maps will not be standard sized (though they will be in a certain number of tiles) Making an editor tool so that I can have others help, so something that I can create in a tool would be helpful 'Teleportation' locations will likely need to exist to get into building maps and to and from different map sets (which will not necessarily be connected), but have not been created yet (lumping in with events at the moment).

    Read the article

  • Rolling With the Punches

    - by D'Arcy Lussier
    So I’ve been tweeting the last little while “Rolling with the punches” and I’ve had some people ask me what that meant. Whether you’re running a conference (like I am this week), or a project, or a birthday party for a 2 year old, you need to be ready to handle those things that are unexpected. Risk mitigation can only go so far and its at those times that you need to become resourceful. So let me tell you what the last few days have been like. Today is the first day of Prairie Dev Con Winnipeg, a conference that I run. On Friday I was informed that my keynote speaker had lost his voice, one of my speakers had a family emergency and had to back out, and I got a warning from another that he was travelling over the weekend and if there was a storm or something he may not be able to get back by Monday for his talk. A storm didn’t happen, but their car did break down and he was delayed. Finally, Saturday night I took my printing order to Staples. It was at 5 and they closed at 6, and I had a bunch of surveys to be printed and cut. The girl working said that she’d have it ready by the next day (Sunday). Her intent was to come in the next morning and finish the job. Unfortunately, she had to be hospitalized that night and never made it into work…and never informed anyone of the remaining work. They found out at 3pm when I came to pick it up and there was no way they’d be able to cut everything in time. So how did we roll with these punches? - Miguel, my keynote speaker, was a trooper and was able to do the keynote but asked that his session get moved from Monday to Tuesday. This is why I wait until the last day before printing out schedules, they can change up to the event and even later. - I was able to move some sessions around to accommodate my stranded speaker and fill the empty slot from the speaker that couldn’t make it. - Staples was able to get me half the cut surveys so I took those and my wife will pick up the rest today. I altered how we’d collect session surveys, and actually I think it’ll work better. So all of this is to say, plan but also plan for what you can’t plan for – there will be things that happen that blindside you, that you’re not sure how to handle or solve. Stop, take a deep breath, and don’t feel that you need to limit yourself to the boundaries that you initially set for yourself. Roll with the punch and learn from it so that you can avoid the blow next time. Now, back to the conference! D

    Read the article

  • How does the fstab 'defaults' option work? Is relatime recommended?

    - by hushs
    I know the fstab defaults option means this: rw,suid,dev,exec,auto,nouser,async. But what if I want to add one more option, for example relatime, should I still add defaults too or they are applied anyway? Is it needed to add at least one option? Some examples: 1. UUID=bfb42838-d866-4233-9679-96e7536356df /media/data ext3 defaults 0 2 2. UUID=bfb42838-d866-4233-9679-96e7536356df /media/data ext3 0 2 3. UUID=bfb42838-d866-4233-9679-96e7536356df /media/data ext3 defaults,relatime 0 2 4. UUID=bfb42838-d866-4233-9679-96e7536356df /media/data ext3 relatime 0 2 Is the (2) correct(no option at all)? Are the (1) and (2) the same? Are the (3) and (4) the same? Furthermore, I read in the Ubuntu Community Documentation that in Ubuntu 8.04 relatime was used as default for linux native file systems. Is it still true for 12.04? If yes, then why do I see this if I use the mount command: /dev/sda2 on / type ext4 (rw,errors=remount-ro) If no, why not? It isn't recommended to use relatime now? I just wanted to apply it to my non system partitions, it is a good idea? EDIT: I found an other command to list the mounted partitions and their options: cat /proc/mounts This is the result of a partition mounted with the defaults option in fstab: /dev/sdb2 /media/adat ext3 rw,relatime,errors=continue,barrier=1,data=ordered 0 0 This is the output of mount for the same partition: /dev/sdb2 on /media/adat type ext3 (rw) And here is both result if the same partition mounted from Nautilus as a non-root user: /dev/sdb2 /media/adat ext3 rw,nosuid,nodev,relatime,errors=continue,barrier=1,data=ordered 0 0 /dev/sdb2 on /media/adat type ext3 (rw,nosuid,nodev,uhelper=udisks) So it looks like relatime is used if we mount an ext partition in 12.04. So it is unneeded to add it manually. So my problem is broadly solved. But I still can't see why the options that should be in the defaults are not listed even with the cat /proc/mounts. Maybe there is a third and even better method to list the partition mount options :)

    Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >