Search Results

Search found 5712 results on 229 pages for 'card'.

Page 191/229 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

    - by williepabon
    I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

    Read the article

  • What’s new in Silverlight 4 RC?

    - by pluginbaby
    I am here in Las Vegas for MIX10 where Scott Guthrie announced today the release of Silverlight 4 RC and the Visual Studio 2010 tools. You can now install VS2010 RC!!! As always, downloads links are here: www.silverlight.net He also said that the final version of Silverlight 4 will come next month (so april)! 4 months ago, I wrote a blog post on the new features of Silverlight 4 beta, so… what’s new in the RC ?   Rich Text · RichTextArea renamed to RichTextBox · Text position and selection APIs · “Xaml” property for serializing text content · XAML clipboard format · FlowDirection support on Runs tag · “Format then type” support when dragging controls to the designer · Thai/Vietnamese/Indic support · UI Automation Text pattern   Networking · UploadProgress support (Client stack) · Caching support (Client stack) · Sockets security restrictions removal (Elevated Trust) · Sockets policy file retrieval via HTTP · Accept-Language header   Out of Browser (Elevated Trust) · XAP signing · Silent install and emulation mode · Custom window chrome · Better support for COM Automation · Cancellable shutdown event · Updated security dialogs   Media · Pinned full-screen mode on secondary display · Webcam/Mic configuration preview · More descriptive MediaSourceStream errors · Content & Output protection updates · Updates to H.264 content protection (ClearNAL) · Digital Constraint Token · CGMS-A · Multicast · Graphics card driver validation & revocation   Graphics and Printing · HW accelerated Perspective Transforms · Ability to query page size and printable area · Memory usage and perf improvements   Data · Entity-level validation support of INotifyDataErrorInfo for DataGrid · XPath support for XML   Parser · New architecture enables future innovation · Performance and stability improvements · XmlnsPrefix & XmlnsDefinition attributes · Support setting order-dependent properties   Globalization & Localization · Support for 31 new languages · Arabic, Hebrew and Thai input on Mac · Indic support   More … · Update to DeepZoom code base with HW acceleration · Support for Private mode browsing · Google Chrome support (Windows) · FrameworkElement.Unloaded event · HTML Hosting accessibility · IsoStore perf improvements · Native hosting perf improvements (e.g., Bing Toolbar) · Consistency with Silverlight for Mobile APIs and Tooling · SDK   - System.Numerics.dll   - Dynamic XAP support (MEF)   - Frame/Navigation refresh support   That’s a lot!   You will find more details on the following links: http://timheuer.com/blog/archive/2010/03/15/whats-new-in-silverlight-4-rc-mix10.aspx http://www.davidpoll.com/2010/03/15/new-in-the-silverlight-4-rc-xaml-features/   Technorati Tags: Silverlight

    Read the article

  • How to delete/edit files from readonly filesystem

    - by Santosh Linkha
    I am having problem with my memory device (actually a memory card that act external memory device like pendrive). experimentx@workmateX:/var/www/zendtest$ sudo rm /media/A88F-8788/python-2.7.1-docs-html.zip rm: cannot remove `/media/A88F-8788/python-2.7.1-docs-html.zip': Read-only file system I tried to change the file permission of the system but that doesn't work experimentx@workmateX:/var/www/zendtest$ sudo chmod 0777 /media/A88F-8788/python-2.7.1-docs-html.zip chmod: changing permissions of `/media/A88F-8788/python-2.7.1-docs-html.zip': Read-only file system But it perfectly works on windows. UPDATE On opening the drive and running command sudo mount -o remount,rw /media/A88F-8788 /var/log/syslog: Mar 23 15:29:48 workmateX kernel: [18042.257407] fat_get_cluster: 11 callbacks suppressed Mar 23 15:29:48 workmateX kernel: [18042.257414] FAT: Filesystem error (dev sdb1) Mar 23 15:29:48 workmateX kernel: [18042.257418] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:29:48 workmateX kernel: [18042.257425] FAT: Filesystem has been set read-only Mar 23 15:29:48 workmateX kernel: [18042.258187] FAT: Filesystem error (dev sdb1) Mar 23 15:29:48 workmateX kernel: [18042.258194] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.333787] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.333795] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.335949] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.335957] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.354903] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.354911] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.357213] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.357221] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.359547] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.359555] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.361929] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.361936] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.377416] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.377424] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.379384] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.379392] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.381898] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.381906] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:35 workmateX kernel: [18149.383764] FAT: Filesystem error (dev sdb1) Mar 23 15:31:35 workmateX kernel: [18149.383772] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.569747] fat_get_cluster: 11 callbacks suppressed Mar 23 15:31:40 workmateX kernel: [18154.569754] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.569758] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.569765] FAT: Filesystem has been set read-only Mar 23 15:31:40 workmateX kernel: [18154.572022] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.572029] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.582933] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.582941] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.585921] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.585929] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.587819] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.587827] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.597547] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.597555] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.599503] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.599511] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.602896] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.602905] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.615338] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.615346] fat_get_cluster: invalid cluster chain (i_pos 0) Mar 23 15:31:40 workmateX kernel: [18154.618574] FAT: Filesystem error (dev sdb1) Mar 23 15:31:40 workmateX kernel: [18154.618581] fat_get_cluster: invalid cluster chain (i_pos 0) var/log/message: Mar 23 15:29:48 workmateX kernel: [18042.257407] fat_get_cluster: 11 callbacks suppressed Mar 23 15:31:40 workmateX kernel: [18154.569747] fat_get_cluster: 11 callbacks suppressed

    Read the article

  • Claims-based Identity Terminology

    - by kaleidoscope
    There are several terms commonly used to describe claims-based identity, and it is important to clearly define these terms. · Identity In terms of Access Control, the term identity will be used to refer to a set of claims made by a trusted issuer about the user. · Claim You can think of a claim as a bit of identity information, such as name, email address, age, and so on. The more claims your service receives, the more you’ll know about the user who is making the request. · Security Token The user delivers a set of claims to your service piggybacked along with his or her request. In a REST Web service, these claims are carried in the Authorization header of the HTTP(S) request. Regardless of how they arrive, claims must somehow be serialized, and this is managed by security tokens. A security token is a serialized set of claims that is signed by the issuing authority. · Issuing Authority & Identity Provider An issuing authority has two main features. The first and most obvious is that it issues security tokens. The second feature is the logic that determines which claims to issue. This is based on the user’s identity, the resource to which the request applies, and possibly other contextual data such as time of day. This type of logic is often referred to as policy[1]. There are many issuing authorities, including Windows Live ID, ADFS, PingFederate from Ping Identity (a product that exposes user identities from the Java world), Facebook Connect, and more. Their job is to validate some credential from the user and issue a token with an identifier for the user's account and  possibly other identity attributes. These types of authorities are called identity providers (sometimes shortened as IdP). It’s ultimately their responsibility to answer the question, “who are you?” and ensure that the user knows his or her password, is in possession of a smart card, knows the PIN code, has a matching retinal scan, and so on. · Security Token Service (STS) A security token service (STS) is a technical term for the Web interface in an issuing authority that allows clients to request and receive a security token according to interoperable protocols that are discussed in the following section. This term comes from the WS-Trust standard, and is often used in the literature to refer to an issuing authority. STS when used from developer point of view indicates the URL to use to request a token from an issuer. For more details please refer to the link http://www.microsoft.com/windowsazure/developers/dotnetservices/ Geeta, G

    Read the article

  • Four Emerging Payment Stories

    - by David Dorf
    The world of alternate payments has been moving fast of late.  Innovation in this area will help both consumers and retailers, but probably hurt the banks (at least that's the plan).  Here are four recent news items in this area: Dwolla, a start-up in Iowa, is trying to make credit cards obsolete.  Twelve guys in Des Moines are using $1.3M they raised to allow businesses to skip the credit card networks and avoid the fees.  Today they move about $1M a day across their network with an average transaction size of $500. Instead of charging merchants 2.9% plus $.30 per transaction, Dwolla charges a quarter -- yep, that coin featuring George Washington. Dwolla (Web + Dollar = Dwolla) avoids the credit networks and connects directly to bank accounts using the bank's ACH network.  They are signing up banks and merchants targeting both B2B and C2B as well as P2P payments.  They leverage social networks to notify people they have a money transfer, and also have a mobile app that uses GPS location. However, all is not rosy.  There have been complaints about unexpected chargebacks and with debit fees being reduced by the big banks, the need is not as pronounced.  The big banks are working on their own network called clearXchange that could provide stiff competition. VeriFone just bought European payment processor Point for around $1B.  By itself this would not have caught my attention except for the fact that VeriFone also announced the acquisition of GlobalBay earlier this month.  In addition to their core business of selling stand-beside payment terminals, with GlobalBay they get employee-operated mobile selling tools and with Point they get a very big payment processing platform. MasterCard and Intel announced a partnership around payments, starting with PayPass, MasterCard's new payment technology.  Intel will lend its expertise to add additional levels of security, which seems to be the biggest barrier for consumer adoption.  Everyone is scrambling to get their piece of cash transactions, which still represents 85% of all transactions. Apple was awarded another mobile payment patent further cementing the rumors that the iPhone 5 will support NFC payments.  As usual, Apple is upsetting the apple cart (sorry) by moving control of key data from the carriers to Apple.  With Apple's vast number of iTunes accounts, they have a ready-made customer base to use the payment infrastructure, which I bet will slowly transition people away from credit cards and toward cheaper ACH.  Gary Schwartz explains the three step process Apple is taking to become a payment processor. Below is a picture I drew representing payments in the retail industry. There's certainly a lot of innovation happening.

    Read the article

  • SQL Contest – Win USD 300 Worth Gift – Cartoon Contest is Back

    - by pinaldave
    There are two excellent contests and we have lots of winning to do this year end. 1) Win USD 25 Amazon Gift Cards (10 Units) This is very simple, you just have to download SQL Server DB Optimizer. That’s it! There are only two conditions: You must have a valid email address. As USD 25 Amazon Gift Card will be sent to the same address. Download DB Optimizer between today and Dec 8, 2012. Link to Download DB Optimizer. Every day one winner will be notified about their winning USD 25 Amazon Gift Cards for next 10 days. 2) Win Star Wars R2-D2 Inflatable R/C This the coolest thing to win. I personally want one but as I am running a contest, I can’t  participate. You get this cool Remote Controlled Device – you just have to answer following cartoon contest. Read the complete story and think what will be the answer provided by the smart employee. There are only two conditions: Leave your answer in the comment area of this blog post (every comment will be hidden till Dec 8, 2012). Please leave your answer in the comment area between today and Dec 8, 2012. Remember you can participate as many times as you want. Make sure that your answer is correct and creative. The most creative answer will be selected. The decision of contest owner will be final. We may have runner’s up prices but for the moment let us try to win R2-D2. Here is the cool video of R2D2. Now here is the cartoon story, please follow the story and complete the very last cartoon template. Your answer should be correct and should be creative. However, the ideal answer will not be longer than one or two sentences. Hint: (Hint) Well, Leave your answer in the comment area of this blog post. If you do not win R2D2, trust me there are chances you may win a surprise gift from me. Remember your answer should be correct and should be creative. However, the ideal answer will not be longer than one or two sentences. Last day to participate in both of the contest is Dec 8, 2012. We will announce the winner in the week of December 10. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, SQLServer, T SQL, Technology

    Read the article

  • System crashes/lockups + compiz/cairo/gnome-panel crashing due to cached ram, please help?

    - by Kristian Thomson
    Can someone help me to troubleshoot system crashes and lockups which result in compiz/cairo dock and gnome-panel crashing? I also get no window borders after the crash and a lot of kernel memory errors. Logs are telling me that apps were killed due to not enough memory, but the system is caching like 14GB of my ram so I'm a bit stuck on what/how to stop it. I'm running Ubuntu 12.10 on a 2011 Mac Mini with 16 GB ram. Here's some of the logs that look like they could be causing trouble. I woke up this morning to find chrome/skype/cairo dock and a few others had been killed and here is what the log said. Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959890] Out of memory: Kill process 12247 (chromium-browse) score 101 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959893] Killed process 12247 (chromium-browse) total-vm:238948kB, anon-rss:17064kB, file-rss:20008kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972283] Out of memory: Kill process 10976 (dropbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972288] Killed process 10976 (dropbox) total-vm:316392kB, anon-rss:115484kB, file-rss:16504kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975890] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975895] Killed process 11515 (tray_icon_worke) total-vm:63336kB, anon-rss:15960kB, file-rss:11436kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281535] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281539] Killed process 10887 (rhythmbox) total-vm:528980kB, anon-rss:92272kB, file-rss:36520kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283110] Out of memory: Kill process 10889 (skype) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283113] Killed process 10889 (skype) total-vm:415056kB, anon-rss:84880kB, file-rss:22160kB I went to look deeper into things and saw that the whole time I'm having these kernel errors with out of memory and something mentioning radeon. I have a Radeon HD 6600M graphics card using the open source driver, not the proprietary one. I was wondering if perhaps using the proprietary one would solve the problem. Also, while writing this in Chrome rhythmbox and chrome just got killed while typing this, due to out of memory errors or so it reports, though I have 7 GB of free RAM at the time with 7 GB cached as well. Here is a full copy of my logs that happened in kern.log simply from when I began typing this question. http://pastebin.com/cdxxDktG Thanks in advance, Kris

    Read the article

  • Apple iPad 2 In April, iPhone 5 in June With New Hardware[Rumours]

    - by Gopinath
    Blogs and news sites are buzzing with the rumours of Apple’s next generation iPad and iPhone devices. These rumours interests the bloggers, geeks and end users of Apple devices as Apple maintains very tight lip on the new features of their upcoming products. The gadget blog Engadget has some very interesting rumours on the release of iPad 2 & iPhone 5 as well the new hardware they are going to have. Lets get into the details if you love to read the rumours of high profile blogs iPad 2 Release Date and Specs Apple seems to be all set to release iPad 2 in April, that is almost an year after the release of first iPad. It’s common for Apple to enjoy an one year long time to release a new version of their products. So if at all the rumours are to be believed, I can place an order of iPad 2 in April. Just like many of you out there, I’m also holding my iPad buying instinct and waiting for iPad 2 as it’s going to have at the minimum retina display,  Facetime features and few game changing features in Apple’s style. The report claims, iPad 2 will have a front and back cameras retina display SD Card slot (seems to be no USB) a dual GSM / CDMA chipset, that lets you use it with both GSM(AT &T, Airte) and CDMA(Verizon, Reliance) telecom providers iPhone 5 Release Date and Specs When it comes to iPhone 5 information, the rumour claims that the new iPhone is a completed redesigned device and it’s slated to release in summer of United States(i.e. June 2011). The device is also being tested by senior Apple executives right inside the campus and strictly not allowed to carry it outside. This restriction is to make sure that iPhone 5 will not land land up in a bar and then in the hands of geek blogs like how it happened with iPhone 4 last year. When it comes to the hardware of iPhone 5 Apple’s new A5 CPU (a Cortex A9-based, multi-core chip) a dual GSM / CDMA chipset, that lets you use it with both GSM(AT &T, Airte) and CDMA(Verizon, Reliance) telecom providers via Engadget and cc image credit flickr/mr-blixt This article titled,Apple iPad 2 In April, iPhone 5 in June With New Hardware[Rumours], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Should I be using a JavaScript SPA designed when security is important

    - by ryanzec
    I asked something kind of similar on stackoverflow with a particular piece of code however I want to try to ask this in a broader sense. So I have this web application that I have started to write in backbone using a Single Page Architecture (SPA) however I am starting to second guess myself because of security. Now we are not storing and sending credit card information or anything like that through this web application but we are storing sensitive information that people are uploading to us and will have the ability to re-download too. The obviously security concern that I have with JavaScript is that you can't trust anything that comes from JavaScript however in a Backbone SPA application, everything is being sent through JavaScript. There are two security features that I will have to build in JavaScript; permissions and authentication. The authentication piece is just me override the Backbone.Router.prototype.navigate method to check the fragment it is trying to load and if the JavaScript application.session.loggedIn is not set to true (and they are not viewing a none authenticated page), they are redirected to the login page automatically. The user could easily modify application.session.loggedIn to equal true (or modify Backbone.Router.prototype.navigate method) but then they would also have to not so easily dynamically embedded a link into the page (or modify a current one) that has the proper classes, data-* attributes, and href values to then load a page that should only be loaded when they user has logged in (and has the permissions). So I have an acl object that deals with the permissions stuff. All someone would have to do to view pages or parts of pages they should not be able to is to call acl.addPermission(resource, permission) with the proper permissions or modify the acl.hasPermission() to always return true and then navigate away and then back to the page. Now certain things is EMCAScript 5 like Object.seal() or Object.freeze() would help with some of this however we have to support IE 8 which does not support those pieces of functionality. Now the REST API also performs security checks on every request so technically even if they are able to see parts of the interface that they should not be able to, they still should not be able to actually affect any data. The main benefits for me in developing a JavaScript SPA application is that the application is a lot more responsive since it is only transferring the minimum amount of JSON data for the requested action and performing the minimum amount of work too. There are also other things that I think are beneficial like you are going to have to develop an API for the data (which is good if you want expand your application to different platforms/technologies) or their is more of a separation between front-end and back-end however if security is a concern, it is really wise to go down the road of a JavaScript SPA application for the front-end?

    Read the article

  • FREE Windows Azure evening in London on April 15th including FREE access to Windows Azure

    - by Eric Nelson
    [Did I overdo the use of FREE in the title? :-)] April 12th to 16th is Microsoft Tech Days – 5 days of sessions on Visual Studio 2010 through to Windows 7 Phone Series. Many of these days are now full (Tip - Thursday still has room if rich client applications is your thing) but the good news is the development community in the UK has pulled together an awesome series of “fringe events” during April in London and elsewhere in the UK. There are sessions on Silverlight, SQL Server 2008 R2, Sharepoint 2010 and … the Windows Azure Platform. The UK AzureNET user group is planning to put on a great evening and AzureNET will be giving away hundreds of free subscriptions to the Windows Azure Platform during the evening. The subscription includes up to 20 Windows Azure Compute nodes and 3 SQL Azure databases for you to play with over the 2 weeks following the event. This is a great opportunity to really explore the Windows Azure Platform in detail – without a credit card! Register now! (and you might also want to join the UK Fans of Azure Community while I have your attention) FYI The Thursday day time event includes an introduction to Windows Azure session delivered by my colleague David – which would be an ideal session to attend if you are new to Azure and want to get the most out of the evening session. 7:00pm: See the difference: How Windows Azure helped build a new way of giving Simon Evans and James Broome (@broomej) They will cover the business context for Azure and then go into patterns used and lessons learnt from the project....as well as showing off the app of course! 8:00pm: UK AzureNET update 8:15pm: NoSQL databases or: How I learned to love the hash table Mark Rendle (@markrendle) In this session Mark will look at how Azure Table Service works and how to use it. We’ll look briefly at the high-level Data Services SDK, talk about its limitations, and then quickly move on to the REST API and how to use it to improve performance and reduce costs. We’ll make-up some pretend real-world problems and solve them in new and interesting ways. We’ll denormalise data (for fun and profit). We’ll talk about how certain social networking sites can deal with huge volumes of data so quickly, and why it sometimes goes wrong. Check out the complete list of fringe events which covers the UK fairly well:

    Read the article

  • How to setup Dual Head with "radeon" driver for R770?

    - by user1709408
    I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

    Read the article

  • How do I keep my Huawei E3131 3G modem from unmounting?

    - by John Perez
    I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

    Read the article

  • Wireless Drivers for Broadcom BCM 4321 (14e4:4329) will not stay connected to a wireless network

    - by Eugene
    So, I'm not necessary new to Linux, I just never took the time to learn it, so please, bare with me. I just swapped out one of my wireless cards from one computer to another. This wireless card in question would be a "Broadcom BCM4321 (14e4:4329)" or actually a "Netgear WN311B Rangemax Next 270 Mbps Wireless PCI Adapter", but that's not important. I've tried (but probably screwed up in the process) installing the "wl" , "b43" and "brcmsmac" drivers, or at least I think I did. Currently I have only the following drivers loaded: eugene@EugeneS-PCu:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd The main issue is that with most of the drivers available that I've installed, they will find my wireless network but, they will only stay connected for about a minute with abnormally slow speed and then all of a sudden disconnect. Currently, the computer is hooked into another to share it's connect so that I can install drivers from the internet instead of loading them on to a flash drive and doing it offline. If anyone has any insight to the problem, that would be awesome. If not, I'll probably just look up how to install the Windows closed source driver. Edit 1: Even when I try the method here, as suggested when this was marked as a duplicate, I still can't stay connected to a wireless network. Edit 2: After discussing my issue with @Luis, he opened my question back up and told me to include the tests/procedures in the comments. Basically I did this: Read the first answer of the link above when this question was marked as duplicate which involved installing removing bcmwl-kernel-source and instead install firmware-b43-installer and b43-fwcutter. No change of result and contacted Luis in the comments, who then told me to try the second answer which involved removing my previous mistake and installing bcmwl-kernel-source Now the Network Manger (this has happend before, but usally I fixed it by using a different driver) even recognizes WiFi exist (both non-literal and literal). Luis who then suggested sudo rfkill unblock all rfkill unblock all didn't return anything, so I decide to try sudo rfkill list all. Returns nothing (no wonder rfkill unblock all did nothing). I enter lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" and that returns nothing. Try loading the driver by entering sudo modprobe b43 and try lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" again. Returns this: eugene@Eugenes-uPC:~$ sudo modprobe b43 eugene@Eugenes-uPC:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl" b43 387371 0 bcma 52096 1 b43 mac80211 630653 1 b43 cfg80211 484040 2 b43,mac80211 ssb_hcd 12869 0 ssb 62379 2 b43,ssb_hcd So to recap: Currently Network Manager doesn't recognize Wireless exists, b43 drivers are loaded and I've currently hardwired a connect from my laptop to the computer that's causing this.

    Read the article

  • Unable to update/ install any files [closed]

    - by Surya
    Possible Duplicate: “Problem with MergeList” error when trying to do an update Just now I installed ubuntu 12.04 on my Lenovo G570 laptop. First I got an error at the time of installation (don't know about it) and I restarted the system and next time, it went well. So, after installing problems started.. There was a error with "Language recognition" and I tried to fix it but didn't work. I tried to install powerTop to check the status of power management. at terminal: sudo apt-get install powertop This is the error I got surya@surya-Lenovo-G570:~$ sudo apt-get powertop install [sudo] password for surya: E: Invalid operation powertop surya@surya-Lenovo-G570:~$ sudo apt-get install powertop Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened. surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ ^C surya@surya-Lenovo-G570:~$ I downloaded Google Chrome .deb one and tried to install but its not working. Software center is opened and its not loading. There was a notification on the status bar which says: An error occurred please run the package manager from the right-click menu ... .... ... E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages "Copy & Paste" from terminal is not really working... When I press Ctrl + C; its showing ^C on terminal but its not working.. The most important error: I am unable to see a "chip" icon on the status bar so as to install proprietary drivers for my ATI drivers... The interesting part is, powertop worked will on live cd and it even detected my ATI card. Update When I opened "Software Up to Date", this showed a error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/extras.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' : My laptop details Lenovo G570; Intel 2nd Gen i5 processor 4GB DDR3 RAM Intel in-build graphics + AMD Radeon HD 6370M 1GB graphics. I need help ASAP.

    Read the article

  • Steps to deploying on Windows Azure

    - by Vincent Grondin
    Alright, these steps might be a little detailed and of few might not be necessary but still it's a pretty accurate road map to deploying on azure...     1)     Open you solution 2)      Rebuild ALL 3)      Right click on your Azure project and click "Publish" 4)      It should open a windows explorer window with your package to be uploaded (.cspkg ) and its associated configuration (.cscfg) to be uploaded too.  Keep it open, you'll need that path later on... 5)      It should also open a browser asking you to login to your passport account, please do so. 6)      After this you will be redirected to the Azure Portal where you will see your Azure Project Name below the « Projet Name » section.  Click on it. 7)      Then you should be redirected to a detailed view of your account on Azure where you will create a new service by clicking the hyperlink on the top right corner. 8)      Choose the right service type for you, most likely the "Hosted Service" type 9)      Choose a « Label » name and click « next » 10)   Choose a name for your service and validate that the name is available in the cloud by clicking the "Check Availability" button 11)   At the bottom of this same page, you can choose to create a group for your service, use no group or join an existing group.  Creating a group means that all applications that belong to the same group will see no cost to exchanging data between other applications of the same group.  Most of the time when you create a single application, creating a group is not necessary.  You should choose a region that's close to your own region. 12)   On the next window, you should see a "Production" environment and a "Staging" environment.  Beware because "Staging" and "Production" are two different environments in the cloud and applications in "Staging" even when not runing do continue to rack in charges...  Choose an environment and click "Deploy". 13)   In the following window, browse to the path where your cspkg resides and then do the same thing with your cscfg file.  Choose a name for your Label,  and click "Deploy"... 14)   From now on, the clock is ticking and unless you have free Azure hours, your credit card is being billed… 15)   Click on the « Run » button to start your application 16)   Be patient.... be very patient… 17)   Once your application has finished starting, you should see a GREEN circle on the left side of the screen indicating that your application is READY.  Click the URL to test your application and remember that if your application is a service, you have to hit the "svc" class behind the link you see there.  Something in the likes of http://testvince2.cloudapp.net/service1.svc  (this is a fictional link) 18)   Hopefully your application will show up or in the case of a service, you will see your service's wsdl meaning that everything is working fine. Happy cloud computing all!

    Read the article

  • VLC will sometimes have issues displaying video in fullscreen. What could cause this? How would I troubleshoot the issue?

    - by George Marian
    Recently VLC has been having issues displaying video in fullscreen mode. AFAIK, nothing has changed with the video card drivers and it's certainly the same version of VLC. (/me shakes a fist at the repository maintainers) This has worked without issue in the past. In fact, I've had as many as 6 instances of VLC running, each playing a video. One was always fullscreen on my second monitor, while the others were tiled on my primary monitor. I was able to toggle any of the other 5 into fullscreen mode and the video displayed without issue. Lately, I've been having trouble running 2 instances in fullscreen mode. (Sometimes, even a single instance will not display the video in fullscreen.) VLC will continue to play the video, but in fullscreen mode I see nothing but a black screen. Sometimes, the video will display if I maximize the VLC window. Other times, I have to settle for a smaller sized window. I don't know if this is pertinent, but sometimes changing the min/max state of a Firefox window (Minefield, specifically) seemed to allow the troublesome instance to display the video in fullscreen mode. However, that did not prove to be a consistent workaround. Sometimes, it seemed that closing a Firefox window did the trick, though that isn't consistently successful either. (I futzed with Firefox, because with the crazy number of windows and tabs that I normally have open, it regularly hogs about 1 GB of RAM.) Another bit of funkiness that comes to mind is the fact that my secondary monitor is considered the primary on boot-up. I use xrandr to designate the real 1st monitor as primary after boot-up, as suggested by someone in a question I asked on the Unix & Linux SE site. Specs: Ubuntu 10.10 w/ Gnome and Compiz 8GB RAM AMD Phenom II 965 Black Edition Asus M4A79 Deluxe mobo XFX ATI Radeon HD 5750 w/ 1GB RAM VLC is configured to use the hardware overlay for video (as per the default setting) Does anyone have an idea what may cause this issue or how I may go about troubleshooting it? Update: Right now I have 2 instances of VLC playing, each in fullscreen mode on a separate monitor. This is what I see:

    Read the article

  • Just another web startup - platform comparison

    - by Holland
    I'm looking to do a web startup which involves something along the lines of an ecommerce site, yet a little more in depth than that. While it's something that I would rather not go into detail with in terms of the initial idea, I can specify (on a basic level) what would be required of the website. If you have any observations or opinions derived from personal experience, which relate to what you see here, I'd appreciate it if you could share these. Paypal's API interaction (definitely). From what I've read about their API, integration with it into their website is VERY expensive, so I'd probably hold off on that until I've (hopefully) generated money and write my own simple credit-card interaction system. SQL Backend (obviously) PostgreSQL seems like a pretty good choice, as from what I've read, it's structure is a bit more "object-oriented" than, say, MySQL. Then again, I've used MySQL before and haven't had much problem with it whatsoever. Would it be worth learning PostgreSQL for this purpose? Java or .Net implementation (Preferably Mono, so I can use .Net while hosting the website using Apache). The reason for this is because, frankly, while I know PHP is a great platform to develop websites with, I hate developing with it. Before someone chimes in and flames me for saying that, note that I have nothing against the language, I just don't like it for my purposes. While Mono may be good to go with, I'm aware that ASP.Net MVC 3 hasn't been released for Mono yet, which may be a pain to work with, without their Razor syntax. Ontop of that, it seems Java is completely FULL of class libraries which deal with web development, that can be downloaded from the web. If anyone has any experience with these, I'd appreciate if that were posted. From what I've read about Spring and Struts2, they seem to be the best out there - especially since they're (AFAIK) MVC. I've considered Python and Django, which do seem REALLY nice, but I don't know much Python, and I'd rather start with something that I already know (language-wise; not framework-wise) than dive into learning a language AND a new framework. I'd REALLY like to be able to host my website via Apache, rather than using Windows Server or anything like that, as, frankly, I hate their setup. I'm not dissing it in any way, shape, or form, I'm just saying I dislike it. <3 terminal config. If there is a good reason to with Windows Server, however, I'd be willing to learn it. C# has a lot of things that Java appears not to have, including Delegates, unsigned types, and LINQ. Is there anything that Java has which can counter these?

    Read the article

  • Fun with Sun Ray, 3D, Oracle VM x86 and SRIOV

    - by wim.coekaerts
    One of the things I like about my job is that I get to play around with stuff and make use of the technologies we work on in my teams. Sort of my own little playground. It allows me to study the products in great detail and put them to use in ways that individual product teams don't always intend them to be used for :) but that makes it fun. I have a lot of this set up at home because... work is sort of hobby and I just like to tinker with it. Anyway, a few weeks ago I was looking at my sun ray rig at home and how well 3D works. Google Earth and some basic opengl tests like glxspheres combined with virtualgl. It resulted in some very cool demos recorded with my little camera (sorry for the crappy quality of the video :-) : OVDC (soft client) on my mac Sun Ray 2FS Never mind the hickups during zoom, that's because I was using the scrollwheel on my mouse and I can't scroll uninterrupted :) Anyway, this is quite cool ! The setup for this was the following : Sun Ray on LAN, Sun Ray Server 5 latest installed on OL5.5 inside a VM running on Oracle VM 2.2 (hardware virt, with a virtual network (vif)) and the virtualgl rendering happened on another box (wopr5) that runs linux on a little atom D520 with an ION2 gpu. So network goes from Sun Ray to Sun Ray Server to wopr5 and back. Given that this is full screen 3D it puts a good amount of load on the network and it's pretty cool that SRS was just a VM :) So, separately, I had written a little blog entry about using sriov and oracle vm a while back. link to sriov blog entry Last night when I came home I wanted to do some more playing around with SRIOV and live migrate. To do this, I wanted to set up a VM with 2 network interfaces, one virtual network (vif) and then one that's one of the SRIOV virtual functions from my network card. Inside the guest they show as eth0 and eth1, and then bond them using a standard linux bonding device (bond0 here) with active active links. The goal here is that on live migrate, we would detach the VF (eth1 in guest in this case), the bond would then just hum along on eth0 (vif) we can live migrate the VM and then on the other server after the migrate completes we re-attach a VF to the VM there and eth1 pops up again and the bond uses both eth0/eth1 to do its work. So, to set this up, I figured, why not use my sun ray server VM because the 3D work generates a nice network load and is very latency/timing sensitive. In the end, I ran glxspheres on my sunray server (vm) displaying on my sun ray 2 fs and while that was running, I did my live migrate test of this vm (unplug pci VF, migrate, reconnect vf) and guess what, it just kept running :) veryyyyyy cool. now, it was supposed to, but it's always nice to see it actually work, for real. Here's a diagram of it. No gimics - just real technology at work ! enjoy :)

    Read the article

  • A brief introduction to BRM and architecture

    - by Yani Miguel
    Oracle Communications Billing and Revenue Management (Oracle BRM) is the telcos industry´s leading solution intended for communications service providers. This post encourages to know BRM starting with the basics. History Portal was a billing and revenue managament solution to communications industry created by Portal Software. In 2006 Oracle acquired Portal Software and the solution was renamed BRM. Today Oracle BRM is the first end-to-end packaged enterprise software suite for the communications industry, however BRM is just one more product in the catalog of OSS solutions that Oracle offers. BRM can bill and manage all communications services including wireline, wireless, broadband, cable, voice over IP, IPTV, music, and video. BRM Architecture BRM´s architecture consists of 4 layers or tiers. Through these layers are the data, bussines logic and interfaces to connect graphical client tools.Application tier This layer provides GUI client tools enabling communication to other layers through open APIs. Some BRM client applications are: Customer Center Pricing Center Universal Event Loader Web Server BRM Billing Application Collections Center Permissioning Center Furthermore, this layer is where are provided real-time external events. Bussines Process Tier Although all layers are equally important, I think it deserves more atention because in this tier BRM functionality is implemented. All functions that give life to BRM are in this layer coded in C language called Opcodes (System Processes in the image). Any changes or additional functionality should be made here, so when we try to customize the product, we will most of the time programming in this layer (Business Policies in the image).Bussines Process Tier Features: Implements Portal system functionalityValidates data from the application tierModifies Portal behavior through business policies. Business policies can by customized.Triggers external systems using event notification. Object Tier This layer is responsible for transfer the BRM requests into database language and translate BRM requests into external system requests. Without it, the business logic (data from Bussines Process Tier) could not be understood by the relational database. Data tier Data tier is responsable for the storage of BRM database and other external systems databases. External systems include credit card, tax, and directory servers. Finally, It's important to note that BRM is designed to easily integrate with the following solutions:AIA 2.4 Siebel CRM E-Business Suite - G/L onlyCommunications Services Gatekeeper Oracle BI Publisher. Personally, I think that BRM could improve migrating client-server architecture to a fully web platform that works with Oracle Middleware like any product of the Fusion Middleware family. Hopefully there are already initiatives in this area.

    Read the article

  • Atheros AR9285 / Lenovo G560 wireless not working after installing 13.04

    - by teyi
    I had Ubuntu 12.04 initially installed on my laptop. I upgraded to 12.10 then 13.04. Everything worked fine, including wireless. After adding a new memory card ( I only had 2 gb and one memory slot free) my wireess stopped working. I backed up all my data and reinstallled Ubuntu 13.04. Everything works fine except wireess. I bought this laptop in 2010 from Japan. It has Intel Core i5 CPU M 450 @2.40 Ghz * 4 3,7 Gb RAM os type 64 bit The output of iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off The output of rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no The output of lshw -C network: *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:7d:fe:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d6400000-d640ffff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:2b:36:ac size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff The wi-fi network appears as disconnected ( it's greyed out) Strangely enough I see a wifi network ( not mine) but not mine or the rest. That network doesn't require a password . I click on it, try to connect and i get an error message: failed to connect to xxxxx ... 32) The access point/org/freedesktop/NetworkManager/AccessPoint/0 was not in the scan list. Someone help please

    Read the article

  • Indie Software Developers - How do I handle taxes?

    - by Connor
    I apologize if this is the wrong site to post on, perhaps someone could point me to the proper place if it is not. Hello, I am 17 years old and currently develop applications/games for Android and iPhone as well as develop internet websites and code a variety of my own projects. I have been very fortunate and have made a large amount of money and continue to make money online to the point where I do not need a stable job, though I'd like to get one after college. I've never held a job anywhere, and have never had to pay taxes. I'm coming into a lot of issues and I am quite confused. I get money from MANY sources- 15 different advertisement networks(!), 4 different payment processors, 5 different affiliate networks and a variety of other sources. All of them pay to different places and at different times (checking account, PayPal, reloadable debit card, ect.) I essentially have a list in a Notepad with names and login information for each source. I have also created a PHP script that uses cURL to grab all the revenue from each service, add it all up, then text me every few hours so I can keep track. It's a mess, but it's working OK, and I can create custom reports (for IRS?). But enough of that, my questions are about taxes in the US, and how indie developers handle it all. I'm at slightly over $250k so far this year, with negligible earnings last year. I have it all stockpiled in a bank account and haven't touched it, I'm a bit scared to. What do I file as? A sole proprietor, a business, just a regular person? How can I handle all of the different revenue sources? (AdSense, CJ, LinkShare) So far none of them have sent me any paperwork on taxes and I've read that I'm supposed to pay taxes quarterly? Do I need paperwork from EACH source to file? Or can I just say I got $x total and that'd be it? What percentage do you pay of total earnings? Average? Should I create an LLC? A corporation? Or stay as a developer? What would be the cheapest options? Could I go to jail? I haven't touched the money except a few dollars to help my parents pay the mortgage once. Any insight would be great. My parents have no idea what I should do, both have no forms of higher education and both have no high school diploma's. They just live day by day with simple jobs. I appreciate any help or experience with this.

    Read the article

  • No HDMI audio in 13.04

    - by King84
    I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

    Read the article

  • JavaOne 2012 Call for Papers

    - by Tori Wieldt
    JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012.  originally posted on blogs.oracle.com/javaone

    Read the article

  • JavaOne 2012 Call for Papers

    - by Tori Wieldt
    JavaOne 2012 is happening Sept. 30-Oct 4 in San Francisco. The Call For Papers for this conference is now open. Java Evangelist Arun Gupta, who was on one of the selection committees and will be again this year, provided some great tips for submission (and a peek into the submission process): JavaOne is a technology-focused conference so any product, marketing or seemingly marketish talk are put at the bottom of the list. Oracle Open World and Oracle Develop are better options for submitting product specific talks. Make your title catchy. Remember the attendees are more likely to read the abstract if they like the title. We try our best to recategorize the talk to a different track if it needs to but please ensure that you are filing in the right track to have all the right eyeballs looking at it. Also, it does not hurt marking an alternate track if your talk meets the criteria. Make sure to coordinate within your team before the submission - multiple sessions from the same team or company does not ensure that the best speaker is picked. In such case we rely upon your "google presence" and/or review committee's prior knowledge of the speaker. The reviewers may not know you or your product at all and you get 750 characters to pitch your idea. Make sure to use all of them, to the last 750th character. Make sure to read your abstract multiple times to ensure that you are giving all the relevant information ? Think through your presentation and see if you are leaving out any important aspects. Also look if the abstract has any redundant information that will not required by the reviewers. There are additional sections that allow you to share information about the speaker and the presentation summary. Use them to blow the horn about yourself and any other relevant details. Please don't say "call me at xxx-xxx-xxxx to find out the details." :-) The tracks this year are: Core Java Platform Development Tools and Techniques Emerging Langauges on the JVM Enterprise Services Architectures and the Cloud Java EE Web Profile and Platform Technologies Java ME, Java Card, Embedded, and Devices Java FX and Rich User Experiences IMPORTANT: Submit your proposal as soon as possible, the the Call for Papers closes April 9th, a mere three weeks away!  Follow these channels to get the latest news about #JavaOne 2012. 

    Read the article

  • Is my computer slow due to lack of swap

    - by Kristian Jensen
    A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >