Search Results

Search found 7447 results on 298 pages for 'estrategia hardware'.

Page 191/298 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Is there a way to enable metro on a 1024x600 netbook?

  - by scatmoi

  Windows 8 Consumer Preview works great on my 1024x600 netbook but, for some strange reason, Microsoft decided to provide its Metro interface only to 1024x768 and up screens. "Strange" because Android can work with as little as 240x320 screens, and I know that Microsoft is presumably targeting smartphones, too, in its upcoming Windows 8. The interface itself is there with all the panels etc. but when one of the rectangles is pressed, Windows 8 just refuses to launch any application (even Internet Explorer), except for Windows Explorer. Looks to me like this isn't a real hardware limitation but some arbitrary flag set in the registry. Is there any way or tweak to enable the Metro interface on 1024x600 screen?

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• PC shut downs automatically after a second

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

  Read the article

• Difference between tc qdisc and netdev_max_backlog

  - by Mediocre Gopher

  I'm wondering what the difference between these two things on linux is. According to the docs tc qdisc can be used to set the queue size for egress and ingress packets coming in and out of the NIC (or that's how I understood it). But from what I understand netdev_max_backlog can also be used to set this. If I were to set both of them which would be used? Or are there actually two queues that are being manipulated in this case? If there are two queues, which queue is above the other (if the application is at the top and the hardware at the bottom)?

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• What has changed to make it possible to develop USB3.0

  - by RoboShop

  Like I know the transfer speeds are vastly different. But I don't understand is why they are faster. And why couldn't they have implemented USB 3.0 when they released 1.0? Like what technical breakthrough was required to get transfer speeds that fast? Was it cost? capacities of computer? like they couldn't read the data fast enough? Although USB is still well below hard drive transfer speeds engineering breakthrough? They found some new material which could transfer at a faster rate? Was this in the cable itself? In the hardware?

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• Setting up Raid 1 Array for Home Server

  - by user1048116

  I'm not sure if this is even possible, but it's worth asking on here! Essentially I have a old machine at home (well, not old hardware wise, but I recently built a new gaming rig), which I decided to install a copy of W2008 R2 on and use as a file/backup server and media center'ish machine. As of now, it has a single drive partitioned into C and D, with D being the Data partition. I have happened to find an old 1TB SATA drive lying around at home, and was wondering if it's possible to setup a Raid 1 array in my rig within Windows without needing to lose everything on my first drive (or maybe even just mirror a specific partition, say the Data partition, as this is just what stores my photos etc). Maybe this isn't possible, but you never know :) Regards, T.C

  Read the article

• How do I force a specific MTU for only certain TCP ports?

  - by Dave S.

  Background I have a set of embedded hardware deployed in the field. These remote machines connect back to my servers at AWS running Ubuntu and I use the iptables mangle chain to lower the MTU to 500 so these devices are happy. For reference, this is the iptables rule I am using: -A POSTROUTING -p tcp --sport 12345 --tcp-flags SYN,RST SYN -o eth0 -j TCPMSS --set-mss 500 Current Problem I'm trying to spin up some servers on the Joyent Cloud using SmartOS, but I can't find any information on selectively changing the MTU like I can on Linux (e.g. all info I've found is on changing it globally, which is not what I want). How would I do it so that all connections on TCP port 12345 get the MTU I want?

  Read the article

• Different graphic cards drivers while booting from external media

  - by goran

  I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• Filtering serial port io

  - by mr odus

  I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• What is a preferred method for automatically configuring and setting up an Ubuntu instance?

  - by sutch

  I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Why has ESXi 5.0 not used the software RAID configuration on my test server?

  - by kafka

  I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

  Read the article

• Transfer Raid Drives to External Enclosure

  - by dubbeat

  I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >