Search Results

Search found 8358 results on 335 pages for 'external harddrive'.

Page 191/335 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Utility to unmap a network drive when the screen saver starts

  - by JimR

  I'm looking for a way to unmap network drives when the screen saver turns on. I have a few users that share an external, encrypted drive (Samba share, not windows) and they have a requirement to disconnect the drive mapping when the local machine is idle. I'd also like it to warn them if there are open files on the mapped drive, if possible. There is also a requirement to force the password to be reentered before mapping when the machine comes back from idle. Is there a Windows setting or utility out there in the wild that meets these requirements?

  Read the article

• Windows Server 2008 R2 - What now?

  - by MrStatic

  So I installed Windows Server 2008 R2, I have Exchange 2010 running for some mail. I installed BlackBerry Enterprise Server Express for kicks. This server runs dns/dhcp for 2 laptops. But what now? It has 200g's free on the main drive and a 150g external that I have mapped as a network drive. I am not sure what else to do with this thing. It was my main station but since my laptop is nicer I am running it headless and using the lcd monitor for it as a second monitor for the laptop when I am at home.

  Read the article

• How to convert ext3 partition to use encrypted file system without loosing data?

  - by User1

  My embedded Linux device have 2 partitions: small root partition containing OS. big data partition which uses ext3 I want to encrypt the data partition by using encrypted file system. I don't want loose any data of the partition. Size of the root partition is too small to hold all data of the data partition. It is not possible to use any external data storage. Is there any tools that can convert filesystem of the data partition from ext3 to encrypted fs without copying all files to other place?

  Read the article

• How to add a disclaimer to forwarded messages to outside domains in Exchange 2013?

  - by Vinícius Ferrão

  I would like to implement some kind of filter to add a disclaimer message within emails forwarded to outside domains. Today we have some users that setup filters to forward messages to external mail servers, as example @gmail addresses. So this kind of forward should be marked with the disclaimer message. Not the normal fwd messages. We have a Postfix mailfiltering gateway too, if it's simpler to implement this on the mail filter, it could be a viable option. What would be the best approach to handle this issue? Thanks,

  Read the article

• How can I repair the boot loader on my laptop?

  - by zbalata

  I had removed my HD from a Dell laptop and accessed it with an external HD port on another computer. Though after returning it to the Dell laptop, it will no longer boot. The PC came pre-installed with Windows 7 and I do not have an installation disk. None of the contents of the original install have been removed or modified. If I use another laptop running Windows 7 to create a repair/recovery disk, would I be able to use it on my Dell to repair the boot sector? How can I repair the bootmgr? It's frustrating knowing there's a perfectly good operating system there that wont boot. Thanks for your time!

  Read the article

• Windows server 2008 rejecting packets from client

  - by l46kok

  We deployed a server application in .NET 4.0 that is going to run on Windows Server 2008 R2. Strangely, the clients cannot connect to the server given an external IP and the server port. I've ran wireshark diagnostics on the server computer and verified that the packets are arriving to the NIC without any issue so it seems Windows Server 2008 is the culprit here. I've tried to temporarily disable the firewall and add the server port into inbound/outbound rule but it still doesn't solve the issue. How can I solve this issue?

  Read the article

• Battery management of a Macbook

  - by darthvader

  I bought a Macbook Pro last week. I mostly use (and plan to use) it like a desktop with an external monitor. I use the system at least 15 hours a day. Now using the coconut battery application, I figured out that the capacity has the current capacity has reduced to 98% of the design capacity. I was wondering what is the best way to manage battery. Should it be always either charging or discharging Should it be plugged in all time. I barely get 2 hours and 30 minutes on battery. Is that normal? I run XCode, VMWare Fusion (for Visual Studio), Mail app, Chrome (5-10 tabs) and Itunes (mp3). The brightness is 60% on battery. I already did the calibration.

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Need help with Microsoft Access 07 & Reports

  - by Moe

  I'm finding it difficult to get MS reporting working to what I'd like to show. What I'm trying to do is: a) In my database store a URL file (HTTP external file), that is a .jpeg. I'd like to use that URL to call the image on the report sheet. I have tried to use 'Control source' on the data panel, but with no success. Any way I can get Dynamic Images to show up on each database. Also, I have a couple of Relational Databases. One Defines Values: For Example: DefinePets('petID','Name of Pet') The other one links the Main DB with the 'DefinePets' database. Eg: connect('petID','mainID','extraFeild') I'd like my report to Go into the "connect" Table, where the the currently viewed Record Value = mainID, then find petID and return Name of Pet. There is a many to many link between definePets and the main Table. (Therefore connect is joining them up) Or is that too much to ask from a simple package like Access?

  Read the article

• Screenshot shows black area with dual monitors on Ubuntu

  - by Hollister

  When using the built-in window screenshot function on Ubuntu (alt-printscreen) with dual monitors, a black rectangle covers about the top third of the captured window (or that area is not captured). When capturing the entire screen (printscreen), the left monitor shows the same size rectangle, but it doesn't cover the window, but pushes it down. It's as if the capture is using the smaller monitor's dimensions, and is not aware of the larger monitor. Here are the images: Window capture: http://moby.to/8d69hp Screen capture: http://moby.to/v99gqs When using the command line, I get this error: $ gnome-screenshot --window (gnome-screenshot:8522): GdkPixbuf-CRITICAL **: gdk_pixbuf_composite: assertion `dest_y >= 0 && dest_y + dest_height <= dest->height' failed System info: Ubuntu 10.04.2 LTS (Lucid) Linux 2.6.32-32-generic Left monitor (laptop) 1280x800 Right monitor (external) 1920x1080 Is there a way to get this to work? Edit: this does not happen with one monitor or when the monitors are mirrored.

  Read the article

• Connect to SVN repository with Netbeans using SVN+SSH

  - by shuby_rocks

  I am trying to connect to a SVN server in order to import my project into it with svn+ssh authentication method. I am using the NetBeans IDE (6.8) with subversion plugin installed on Windows XP SP2. I have plink installed with its path set in the Windows PATH env variable. When I use the similar looking repository URL (XXXX and YYYY replaced with sensible things) svn+ssh://XXXX@YYYY/home/dce/svn/trunk along with this external tunnel command plink -l <myUserName> -i C:\\privateKey.ppk I keep getting this error: org.tigris.subversion.javahl.ClientException: Network connection closed unexpectedly I searched about it on the Internet and tried many things but didn't work out. Please help if anybody has some idea what may be going wrong. Thanks a lot in advance.

  Read the article

• Need IP port forwarding to access an internel service running on an internal machine

  - by appleluo

  I am trying to configure iptables to do port forwarding for certain request. The scenario is like this: Login node A can be accessed from outside Compute node B that running the service can be accessed from A but not from outside. I want to set up iptables so that a request for the service on B from outside can be accessed through A. A has two ethernet ports: Internal eth0, with ip internal_A and External eth1, with ip external_A. B has 1 ethernet port, internal eth0. let's say its ip is internal_B The service listens to internal_B:5900. We open external_A:10000 for user access. I configure my iptables with the following commands: echo 1> /proc/sys/net/ipv4/ip_forward /sbin/iptables -P FORWARD ACCEPT /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE /sbin/iptables -A PREROUTING -p tcp -t nat --dport 10000 -j DNAT --to-destination interal_B:5900 /sbin/iptables -A OUTPUT -p tcp -t nat -d external_A --dport 10000 -j DNAT --to-destination internal_B:5900 But it didn't work. Can anybody help me?

  Read the article

• Robocopying DLLs and EXEs

  - by BinaryDeuce

  I've used Robocopy for several years now for backup purposes, and never looked back at any backup application I used in the past. I replicate whole valued directories to a removable HD, than from this HD to and equivalent system. Over time, quite a few DLL and EXE have accumulated in these directories, none of which Robocopy can seem to copy to my external HD. Thus, my 2 computers drift apart slowly... Is there anyway, using one of the eigthy-nine (89) switches (or one of the 2^89 - 1 = 6,1897002 × 10^26 combinations thereof) to force Robocopy to robotically copy EXEs, DLLs and other of my "access is denied" friends? Thanks

  Read the article

• How difficult is it to setup a mailserver?

  - by Jacob R

  I want a secure mail solution, as I am looking to move away from Google and other parties looking into my private data. How much of a PITA is it to setup my own mailserver? Should I go for an external provider with a good privacy policy and encrypted data instead? I have a VPS running Debian (with a dedicated IP + reverse DNS), and I'm a fairly capable Linux administrator, having setup a couple of webservers, home networks, and looking over the shoulder of sysadmins at work. The security I currently have on the VPS is limited to iptables and installing/running the bare minimum of what I need (currently basically irssi and lighttpd). When setting up a mail server, is there a lot of stuff to take into consideration? Will my outgoing mail be marked as spam on other servers if I don't implement a number of solutions? Will reliable spam filtering be difficult to setup? Can I easily encrypt the stored mail?

  Read the article

• usb vs firewire for connecting two RAID 0 disks

  - by Arne

  I have a 2TB and a 4TB RAID 0 external drives (both have two physical hard drives in them). Both have a FW800, FW400, and USB port. My MacBook Pro has one FW800 port and two USB ports. I want to copy data from the 4TB drive to the 2TB drive. Is it better to A - connect both directly to the laptop, one with USB and one with FW800 or B - connect the 4TB drive to laptop with FW800 and the 2TB drive to the 4TB drive using a FW400 cable? Anyone have problems daisy-chaining RAID 0 disks using FW? Thanks!

  Read the article

• How to speed up rsync?

  - by Jakobud

  I'm running rsync to sync a directory onto my external USB HDD. It's about 150 gigs of data. 50000+ files I would guess. It's running it's first sync at the moment, but its copying files at a rate of only 1-5 MB/s. That seems incredibly slow for a USB 2.0 enclosure. There are no other transfers happening on the drive either. Here are the options I used: rsync -avz --progress /mysourcefolder /mytargetfolder I'm running Ubuntu Server 9.10.

  Read the article

• Ubuntu OpenLDAP and Mac OS X Roaming Profiles

  - by Sam Hammamy

  Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

  Read the article

• Nearest PC equivalent to Mac Target Disk Mode?

  - by username

  Mac firmware has a special boot mode that allows you to offer its internal hdd to another computer as an external disk (you just connect the two machines via an IEEE 1394 cable). Only the second machine needs a functioning OS installed. Any good suggestions for something similar on the PC side of things? Block level access isn't important to me, I'd just like to be able to copy files off it. It doesn't matter to me if it uses Ethernet, IEEE 1394, or wifi - I just like having a quick way to access files on a client PC. Is there any single-purpose Linux distro specially designed to do this? It'd be nice to have something super simple, quickbooting, and small that I could install on a USB drive. I used to use Knoppix, but it's overkill as a Target Mode replacement.

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

• How to setup a simple self-hosted dynamic DNS server

  - by Cerin

  I have a small internal network of physical machines running hypervisors, which in turn run several KVM Ubuntu virtual machines. How would I setup an internal dynamic DNS server so that when I run a script to create a new virtual machine, that VM could automatically register itself in the DNS server? Bind seems to be the standard DNS server for Linux, but it seems designed for a much more "static" DNS model. Dynamically updating this would require a complicated script that would have to SSH into the DNS server, edit configuration files, and then restart the server. This doesn't seem like a very elegant solution. Are there better options? I saw a similar question, although they're asking for a solution for a public setting on Amazon. My servers are entirely private, and I don't want to rely on an external VM host or Dynamic DNS provider.

  Read the article

• Hosted Kerio Mailserver vs. Hosted Exchange

  - by Dayton Brown

  Hi all, I'm in the beginning stages of migrating from an internal exchange server (2003) to external hosted services. We don't have a huge user base, less than 100, but we need to support BlackBerries, iPhones, Outlook RPC/HTTP, etc. I really like exchange hosted providers (I've used intermedia in the past) but pricing is a bit high. Does anyone have any experience with Kerio? It looks great, but I'd like to hear some unbiased opinions. Or biased if you are really happy working for a particular hosting company ;-)

  Read the article

• Carbonite has taken over my iMac

  - by Larry Rothfork

  I used Carbonite to back up 75GB on my iMac. I also created a folder on my iMac to copy files to, from an external hard drive and then use Carbonite to back up from there. And THEN thinking I had everything safely backed up and, in order to make room on my hard drive I DELETED some of those files, and instead of increasing disk space..my disk space has shrunk to 2GB... I know, I know..you can't use Carbonite like that, but now I have two questions. 1) What is the explanation for the decrease in disk space even though I have deleted about 20GB of those backed up files from my hard drive? It must have something to do with the way Carbonite references backed up files, And 2) Is there a way to extricate myself from this situation?

  Read the article

• Carbonite has taken over my iMac

  - by Larry Rothfork

  I used Carbonite to back up 75GB on my iMac. I also created a folder on my iMac to copy files to, from an external hard drive and then use Carbonite to back up from there. And THEN thinking I had everything safely backed up and, in order to make room on my hard drive I DELETED some of those files, and instead of increasing disk space..my disk space has shrunk to 2GB... I know, I know..you can't use Carbonite like that, but now I have two questions. 1) What is the explanation for the decrease in disk space even though I have deleted about 20GB of those backed up files from my hard drive? It must have something to do with the way Carbonite references backed up files, And 2) Is there a way to extricate myself from this situation?

  Read the article

• Overlapping Samba Shares

  - by Toaomalkster

  Is it OK to have samba shares that overlap, like the following: [whole-drive] path = /mnt/myusbdrive ... [music] path = /mnt/myusbdrive/music ... [movies] path = /mnt/myusbdrive/movies ... I have a mounted external HDD with music and movies, plus a whole bunch of other stuff like backups. I want to expose the music and movies directories as separate samba shares (probably with guest access), so that they're uncluttered with all the other stuff; and I want to expose the entire drive as a separate samba share (with higher permissions) for doing more administrative things across the drive. Does Samba behave well with this configuration? I'm wondering if I'd end up with problems like phantom writes if the same file is accessed at the same time across two different shares. Details: OS: Debian GNU/Linux wheezy/sid on Raspberry Pi HDD: NTFS, mounted as ntfs-3g. Samba: version 3.6.6

  Read the article

• Cisco asa 5505 locks up / unresponsive

  - by Chris

  We have a cisco asa 5505 that's new (in service for about 2 months) running 7.2(4) software. Every day around 10a it locks up for approx 10 minutes. We're monitoring it via snmp with stg, and snmp doesn't respond during that time. There's no output in the 'show crash' output. Internet connectivity is also dropped. Wondering if anyone else has seen this and what the fix might be. Currently we're looking at upgrading software, but will need memory upgrade for that. We've forced the speed and duplex on the internal and external interfaces, but the problem is still occurring. It's connected on the internal lan to a netgear 724 gige switch.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >