Search Results

Search found 5157 results on 207 pages for 'node'.

Page 191/207 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • Partition Wise Joins

    - by jean-pierre.dijcks
    Some say they are the holy grail of parallel computing and PWJ is the basis for a shared nothing system and the only join method that is available on a shared nothing system (yes this is oversimplified!). The magic in Oracle is of course that is one of many ways to join data. And yes, this is the old flexibility vs. simplicity discussion all over, so I won't go there... the point is that what you must do in a shared nothing system, you can do in Oracle with the same speed and methods. The Theory A partition wise join is a join between (for simplicity) two tables that are partitioned on the same column with the same partitioning scheme. In shared nothing this is effectively hard partitioning locating data on a specific node / storage combo. In Oracle is is logical partitioning. If you now join the two tables on that partitioned column you can break up the join in smaller joins exactly along the partitions in the data. Since they are partitioned (grouped) into the same buckets, all values required to do the join live in the equivalent bucket on either sides. No need to talk to anyone else, no need to redistribute data to anyone else... in short, the optimal join method for parallel processing of two large data sets. PWJ's in Oracle Since we do not hard partition the data across nodes in Oracle we use the Partitioning option to the database to create the buckets, then set the Degree of Parallelism (or run Auto DOP - see here) and get our PWJs. The main questions always asked are: How many partitions should I create? What should my DOP be? In a shared nothing system the answer is of course, as many partitions as there are nodes which will be your DOP. In Oracle we do want you to look at the workload and concurrency, and once you know that to understand the following rules of thumb. Within Oracle we have more ways of joining of data, so it is important to understand some of the PWJ ideas and what it means if you have an uneven distribution across processes. Assume we have a simple scenario where we partition the data on a hash key resulting in 4 hash partitions (H1 -H4). We have 2 parallel processes that have been tasked with reading these partitions (P1 - P2). The work is evenly divided assuming the partitions are the same size and we can scan this in time t1 as shown below. Now assume that we have changed the system and have a 5th partition but still have our 2 workers P1 and P2. The time it takes is actually 50% more assuming the 5th partition has the same size as the original H1 - H4 partitions. In other words to scan these 5 partitions, the time t2 it takes is not 1/5th more expensive, it is a lot more expensive and some other join plans may now start to look exciting to the optimizer. Just to post the disclaimer, it is not as simple as I state it here, but you get the idea on how much more expensive this plan may now look... Based on this little example there are a few rules of thumb to follow to get the partition wise joins. First, choose a DOP that is a factor of two (2). So always choose something like 2, 4, 8, 16, 32 and so on... Second, choose a number of partitions that is larger or equal to 2* DOP. Third, make sure the number of partitions is divisible through 2 without orphans. This is also known as an even number... Fourth, choose a stable partition count strategy, which is typically hash, which can be a sub partitioning strategy rather than the main strategy (range - hash is a popular one). Fifth, make sure you do this on the join key between the two large tables you want to join (and this should be the obvious one...). Translating this into an example: DOP = 8 (determined based on concurrency or by using Auto DOP with a cap due to concurrency) says that the number of partitions >= 16. Number of hash (sub) partitions = 32, which gives each process four partitions to work on. This number is somewhat arbitrary and depends on your data and system. In this case my main reasoning is that if you get more room on the box you can easily move the DOP for the query to 16 without repartitioning... and of course it makes for no leftovers on the table... And yes, we recommend up-to-date statistics. And before you start complaining, do read this post on a cool way to do stats in 11.

    Read the article

  • Building InstallShield based Installers using Team Build 2010

    - by jehan
    Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

    Read the article

  • c# Truncate HTML safely for article summary

    - by WickedW
    Hi All, Does anyone have a c# variation of this? This is so I can take some html and display it without breaking as a summary lead in to an article? http://stackoverflow.com/questions/1193500/php-truncate-html-ignoring-tags Save me from reinventing the wheel! Thank you very much ---------- edit ------------------ Sorry, new here, and your right, should have phrased the question better, heres a bit more info I wish to take a html string and truncate it to a set number of words (or even char length) so I can then show the start of it as a summary (which then leads to the main article). I wish to preserve the html so I can show the links etc in preview. The main issue I have to solve is the fact that we may well end up with unclosed html tags if we truncate in the middle of 1 or more tags! The idea I have for solution is to a) truncate the html to N words (words better but chars ok) first (be sure not to stop in the middle of a tag and truncate a require attribute) b) work through the opened html tags in this truncated string (maybe stick them on stack as I go?) c) then work through the closing tags and ensure they match the ones on stack as I pop them off? d) if any open tags left on stack after this, then write them to end of truncated string and html should be good to go!!!! -- edit 12112009 Here is what I have bumbled together so far as a unittest file in VS2008, this 'may' help someone in future My hack attempts based on Jan code are at top for char version + word version (DISCLAIMER: this is dirty rough code!! on my part) I assume working with 'well-formed' HTML in all cases (but not necessarily a full document with a root node as per XML version) Abels XML version is at bottom, but not yet got round to fully getting tests to run on this yet (plus need to understand the code) ... I will update when I get chance to refine having trouble with posting code? is there no upload facility on stack? Thanks for all comments :) using System; using System.Collections.Generic; using System.Text.RegularExpressions; using System.Xml; using System.Xml.XPath; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace PINET40TestProject { [TestClass] public class UtilityUnitTest { public static string TruncateHTMLSafeishChar(string text, int charCount) { bool inTag = false; int cntr = 0; int cntrContent = 0; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrContent == charCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) cntrContent++; } string substr = text.Substring(0, cntr); //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); // to be honest, this seemed like a good idea then I got lost along the way // so logic is probably hanging by a thread!! foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishWord(string text, int wordCount) { bool inTag = false; int cntr = 0; int cntrWords = 0; Char lastc = ' '; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrWords == wordCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) { // do not count double spaces, and a space not in a tag counts as a word if (c == 32 && lastc != 32) cntrWords++; } } string substr = text.Substring(0, cntr) + " ..."; //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishCharXML(string text, int charCount) { // your data, probably comes from somewhere, or as params to a methodint XmlDocument xml = new XmlDocument(); xml.LoadXml(text); // create a navigator, this is our primary tool XPathNavigator navigator = xml.CreateNavigator(); XPathNavigator breakPoint = null; // find the text node we need: while (navigator.MoveToFollowing(XPathNodeType.Text)) { string lastText = navigator.Value.Substring(0, Math.Min(charCount, navigator.Value.Length)); charCount -= navigator.Value.Length; if (charCount <= 0) { // truncate the last text. Here goes your "search word boundary" code: navigator.SetValue(lastText); breakPoint = navigator.Clone(); break; } } // first remove text nodes, because Microsoft unfortunately merges them without asking while (navigator.MoveToFollowing(XPathNodeType.Text)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent, then move the rest navigator.MoveTo(breakPoint); while (navigator.MoveToFollowing(XPathNodeType.Element)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent // then remove *all* empty nodes to clean up (not necessary): // TODO, add empty elements like <br />, <img /> as exclusion navigator.MoveToRoot(); while (navigator.MoveToFollowing(XPathNodeType.Element)) { while (!navigator.HasChildren && (navigator.Value ?? "").Trim() == "") { navigator.DeleteSelf(); } } // moves to parent navigator.MoveToRoot(); return navigator.InnerXml; } [TestMethod] public void TestTruncateHTMLSafeish() { // Case where we just make it to start of HREF (so effectively an empty link) // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>1234</h1><b><i>56789</i>012</b>", TruncateHTMLSafeishChar( @"<h1>1234</h1><b><i>56789</i>012345</b>", 12)); // In middle of a! Assert.AreEqual(@"<h1>1234</h1><a href=""testurl""><b>567</b></a>", TruncateHTMLSafeishChar( @"<h1>1234</h1><a href=""testurl""><b>5678</b></a><i><strong>some italic nested in string</strong></i>", 7)); // more Assert.AreEqual(@"<div><b><i><strong>1</strong></i></b></div>", TruncateHTMLSafeishChar( @"<div><b><i><strong>12</strong></i></b></div>", 1)); // br Assert.AreEqual(@"<h1>1 3 5</h1><br />6", TruncateHTMLSafeishChar( @"<h1>1 3 5</h1><br />678<br />", 6)); } [TestMethod] public void TestTruncateHTMLSafeishWord() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>one two <br /></h1><b><i>three ...</i></b>", TruncateHTMLSafeishWord( @"<h1>one two <br /></h1><b><i>three </i>four</b>", 3), "we have added ' ...' to end of summary"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } [TestMethod] public void TestTruncateHTMLSafeishWordXML() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags string output = TruncateHTMLSafeishCharXML( @"<body><h1>one two </h1><b><i>three </i>four</b></body>", 13); Assert.AreEqual(@"<body>\r\n <h1>one two </h1>\r\n <b>\r\n <i>three</i>\r\n </b>\r\n</body>", output, "XML version, no ... yet and addeds '\r\n + spaces?' to format document"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishCharXML( @"<body><h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i></body>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } } }

    Read the article

  • GitHub Integration in Windows Azure Web Site

    - by Shaun
    Microsoft had just announced an update for Windows Azure Web Site (a.k.a. WAWS). There are four major features added in WAWS which are free scaling mode, GitHub integration, custom domain and multi branches. Since I ‘m working in Node.js and I would like to have my code in GitHub and deployed automatically to my Windows Azure Web Site once I sync my code, this feature is a big good news to me.   It’s very simple to establish the GitHub integration in WAWS. First we need a clean WAWS. In its dashboard page click “Set up Git publishing”. Currently WAWS doesn’t support to change the publish setting. So if you have an existing WAWS which published by TFS or local Git then you have to create a new WAWS and set the Git publishing. Then in the deployment page we can see now WAWS supports three Git publishing modes: - Push my local files to Windows Azure: In this mode we will create a new Git repository on local machine and commit, publish our code to Windows Azure through Git command or some GUI. - Deploy from my GitHub project: In this mode we will have a Git repository created on GitHub. Once we publish our code to GitHub Windows Azure will download the code and trigger a new deployment. - Deploy from my CodePlex project: Similar as the previous one but our code would be in CodePlex repository.   Now let’s back to GitHub and create a new publish repository. Currently WAWS GitHub integration only support for public repositories. The private repositories support will be available in several weeks. We can manage our repositories in GitHub website. But as a windows geek I prefer the GUI tool. So I opened the GitHub for Windows, login with my GitHub account and select the “github” category, click the “add” button to create a new repository on GitHub. You can download the GitHub for Windows here. I specified the repository name, description, local repository, do not check the “Keep this code private”. After few seconds it will create a new repository on GitHub and associate it to my local machine in that folder. We can find this new repository in GitHub website. And in GitHub for Windows we can also find the local repository by selecting the “local” category.   Next, we need to associate this repository with our WAWS. Back to windows developer portal, open the “Deploy from my GitHub project” in the deployment page and click the “Authorize Windows Azure” link. It will bring up a new windows on GitHub which let me allow the Windows Azure application can access your repositories. After we clicked “Allow”, windows azure will retrieve all my GitHub public repositories and let me select which one I want to integrate to this WAWS. I selected the one I had just created in GitHub for Windows. So that’s all. We had completed the GitHub integration configuration. Now let’s have a try. In GitHub for Windows, right click on this local repository and click “open in explorer”. Then I added a simple HTML file. 1: <html> 2: <head> 3: </head> 4: <body> 5: <h1> 6: I came from GitHub, WOW! 7: </h1> 8: </body> 9: </html> Save it and back to GitHub for Windows, commit this change and publish. This will upload our changes to GitHub, and Windows Azure will detect this update and trigger a new deployment. If we went back to azure developer portal we can find the new deployment. And our commit message will be shown as the deployment description as well. And here is the page deployed to WAWS.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • SQL SERVER – SSMS: Top Object and Batch Execution Statistics Reports

    - by Pinal Dave
    The month of June till mid of July has been the fever of sports. First, it was Wimbledon Tennis and then the Soccer fever was all over. There is a huge number of fan followers and it is great to see the level at which people sometimes worship these sports. Being an Indian, I cannot forget to mention the India tour of England later part of July. Following these sports and as the events unfold to the finals, there are a number of ways the statisticians can slice and dice the numbers. Cue from soccer I can surely say there is a team performance against another team and then there is individual member fairs against a particular opponent. Such statistics give us a fair idea to how a team in the past or in the recent past has fared against each other, head-to-head stats during World cup and during other neutral venue games. All these statistics are just pointers. In reality, they don’t reflect the calibre of the current team because the individuals who performed in each of these games are totally different (Typical example being the Brazil Vs Germany semi-final match in FIFA 2014). So at times these numbers are misleading. It is worth investigating and get the next level information. Similar to these statistics, SQL Server Management studio is also equipped with a number of reports like a) Object Execution Statistics report and b) Batch Execution Statistics reports. As discussed in the example, the team scorecard is like the Batch Execution statistics and individual stats is like Object Level statistics. The analogy can be taken only this far, trust me there is no correlation between SQL Server functioning and playing sports – It is like I think about diet all the time except while I am eating. Performance – Batch Execution Statistics Let us view the first report which can be invoked from Server Node -> Reports -> Standard Reports -> Performance – Batch Execution Statistics. Most of the values that are displayed in this report come from the DMVs sys.dm_exec_query_stats and sys.dm_exec_sql_text(sql_handle). This report contains 3 distinctive sections as outline below.   Section 1: This is a graphical bar graph representation of Average CPU Time, Average Logical reads and Average Logical Writes for individual batches. The Batch numbers are indicative and the details of individual batch is available in section 3 (detailed below). Section 2: This represents a Pie chart of all the batches by Total CPU Time (%) and Total Logical IO (%) by batches. This graphical representation tells us which batch consumed the highest CPU and IO since the server started, provided plan is available in the cache. Section 3: This is the section where we can find the SQL statements associated with each of the batch Numbers. This also gives us the details of Average CPU / Average Logical Reads and Average Logical Writes in the system for the given batch with object details. Expanding the rows, I will also get the # Executions and # Plans Generated for each of the queries. Performance – Object Execution Statistics The second report worth a look is Object Execution statistics. This is a similar report as the previous but turned on its head by SQL Server Objects. The report has 3 areas to look as above. Section 1 gives the Average CPU, Average IO bar charts for specific objects. The section 2 is a graphical representation of Total CPU by objects and Total Logical IO by objects. The final section details the various objects in detail with the Avg. CPU, IO and other details which are self-explanatory. At a high-level both the reports are based on queries on two DMVs (sys.dm_exec_query_stats and sys.dm_exec_sql_text) and it builds values based on calculations using columns in them: SELECT * FROM    sys.dm_exec_query_stats s1 CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS s2 WHERE   s2.objectid IS NOT NULL AND DB_NAME(s2.dbid) IS NOT NULL ORDER BY  s1.sql_handle; This is one of the simplest form of reports and in future blogs we will look at more complex reports. I truly hope that these reports can give DBAs and developers a hint about what is the possible performance tuning area. As a closing point I must emphasize that all above reports pick up data from the plan cache. If a particular query has consumed a lot of resources earlier, but plan is not available in the cache, none of the above reports would show that bad query. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

    Read the article

  • Selling Visual Studio ALM

    - by Tarun Arora
    Introduction As a consultant I have been selling Application Lifecycle Management services using Visual Studio and Team Foundation Server. I’ve been contacted various times by friends working in organization telling me that ALM processes in their company were benchmarked when dinosaurs walked the earth. Most of these individuals already know the great features Microsoft ALM tools offer and are keen to start a conversation with the CIO but don’t exactly know where to start. It is very important how you engage in your first conversation, if you start the conversation with ‘There is this great tooling from Microsoft which offers amazing features to boost developer productivity, … ‘ from experience I can tell you the reply from your CIO would be ‘I already know! Our existing landscape has a combination of bleeding edge open source and cutting edge licensed tools which already cover these features quite well, more over Microsoft products have a high licensing cost associated to them.’ You will always find it harder to sell by feature, the trick is to highlight the gap in the existing processes & tools and then highlight the impact of these gaps to the overall development processes, by now you would have captured enough attention to show off how the ALM tooling offered by Microsoft not only fills those gaps but offers great value adds to take their development practices to the next level. Rangers ALM Assessment Guide Image 1 – Welcome! First look at the Rangers ALM assessment guide Most organization already have some processes in place to cover aspects of ALM. How do you go about proving that there isn’t enough cover in place? This is where Visual Studio ALM Rangers ALM Assessment guide can help. The ALM assessment guide is really a tool that helps you gather information about Development practices and processes within a customer's environment. Several questionnaires are used to identify the current state of individual development lifecycle areas and decide on a desired state for those processes. It also presents guidance and roll-up summaries to help with recommendations moving forward. The ALM Rangers assessment guide can be downloaded from here. Image 2 – ALM Assessment guide divided into different functions of SDLC The assessment guide is divided into different functions of Software Development Lifecycle (listed below), this gives you the ability to access how mature the company is in different areas of SDLC. Architecture & Design Requirement Engineering & UX Development Software Configuration Management Governance Deployment & Operations Testing & Quality Assurance Project Planning & Management Each section has a set of questions, fill in the assessment by selecting “Never/Sometimes/Always” from the Answer column in the question sheets.  Each answer has weightage to the overall score. Each question has a link next to it, clicking the link takes you to the Reference sheet which gives you more details about the question along with a reason for “why you need to ask this question?”, “other ways to phrase the question” and “what to expect as an answer from the customer”. The trick is to engage the customer in a discussion. You need to probe a lot, listen to the customer and have a discussion with several team members, preferably without management to ensure that you receive candid feedback. This reminds me of a funny incident when during an ALM review a customer told me that they have a sophisticated semi-automated application deployment process, further discussions revealed that deployment actually involved 72 manual configuration steps per production node. Such observations can be recorded in the Issue Brainstorming worksheet for further consideration later. It is also worth mentioning the different levels of ALM maturity to the customer. By default the desired state of ALM maturity is set to Standard, it is possible to set a desired state by area, you should strive for Advanced or Dynamic, it always helps by explaining the classification and advantages. Image 3 – ALM levels by description The ALM assessment guide helps you arrive at a quantitative measure of the company’s ALM maturity. The resultant graph plotted on a spider’s web shows you the company’s current state of ALM maturity and the desired state of ALM maturity. Further since the results are classified by area you can immediately spot the areas where the customer needs immediate help. Image 4 – The spiders web! The red cross icons are areas shouting out for immediate attention, the yellow exclamation icons are areas that need improvement. These icons are calculated on the difference between the Current State of ALM maturity VS the Desired state of ALM maturity. Image 5 – Results by area Conclusion To conclude the Rangers ALM assessment guide gives you the ability to, Measure the customer’s current ALM maturity level Understand the ALM maturity level the customer desires to achieve Capture a healthy list of issues the customer wants to brainstorm further Now What’s next…? Download and get started with the Rangers ALM Assessment Guide. If you have successfully captured the above listed three pieces of information you are in a great state to make recommendations on the identified areas highlighting the benefits that Visual Studio ALM tools would offer. In the next post I will be covering how to take the ALM assessment results as the base to actually convert your recommendation into a sell.  Remember to subscribe to http://feeds.feedburner.com/TarunArora. I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. *** A special thanks goes out to fellow ranges Willy, Ethem and Philip for reviewing the blog post and providing valuable feedback. ***

    Read the article

  • Querying Visual Studio project files using T-SQL and Powershell

    - by jamiet
    Earlier today I had a need to get some information out of a Visual Studio project file and in this blog post I’m going to share a couple of ways of going about that because I’m pretty sure I won’t be the only person that ever wants to do this. The specific problem I was trying to solve was finding out how many objects in my database project (i.e. in my .dbproj file) had any warnings suppressed but the techniques discussed below will work pretty well for any Visual Studio project file because every such file is simply an XML document, hence it can be queried by anything that can query XML documents. Ever heard the phrase “when all you’ve got is hammer everything looks like a nail”? Well that’s me with querying stuff – if I can write SQL then I’m writing SQL. Here’s a little noddy database project I put together for demo purposes: Two views and a stored procedure, nothing fancy. I suppressed warnings for [View1] & [Procedure1] and hence the pertinent part my project file looks like this:   <ItemGroup>    <Build Include="Schema Objects\Schemas\dbo\Views\View1.view.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151,3276</SuppressWarnings>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Views\View2.view.sql">      <SubType>Code</SubType>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Programmability\Stored Procedures\Procedure1.proc.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151</SuppressWarnings>    </Build>  </ItemGroup>  <ItemGroup> Note the <SuppressWarnings> elements – those are the bits of information that I am after. With a lot of help from folks on the SQL Server XML forum  I came up with the following query that nailed what I was after. It reads the contents of the .dbproj file into a variable of type XML and then shreds it using T-SQL’s XML data type methods: DECLARE @xml XML; SELECT @xml = CAST(pkgblob.BulkColumn AS XML) FROM   OPENROWSET(BULK 'C:\temp\QueryingProjectFileDemo\QueryingProjectFileDemo.dbproj' -- <-Change this path!                    ,single_blob) AS pkgblob                    ;WITH XMLNAMESPACES( 'http://schemas.microsoft.com/developer/msbuild/2003' AS ns) SELECT  REVERSE(SUBSTRING(REVERSE(ObjectPath),0,CHARINDEX('\',REVERSE(ObjectPath)))) AS [ObjectName]        ,[SuppressedWarnings] FROM   (        SELECT  build.query('.') AS [_node]        ,       build.value('ns:SuppressWarnings[1]','nvarchar(100)') AS [SuppressedWarnings]        ,       build.value('@Include','nvarchar(1000)') AS [ObjectPath]        FROM    @xml.nodes('//ns:Build[ns:SuppressWarnings]') AS R(build)        )q And here’s the output: And that’s it – an easy way of discovering which warnings have been suppressed and for which objects in your database projects. I won’t bother going over the code as it is fairly self-explanatory – peruse it at your leisure.   Once I had the SQL above I figured I’d share it around a little in case it was ever useful to anyone else; hence I’m writing this blog post and I also posted it on the Visual Studio Database Development Tools forum at FYI: Discover which objects have had warnings suppressed. Luckily Kevin Goode saw the thread and he posted a different solution to the same problem, one that uses Powershell. The advantage of Kevin’s Powershell approach is that it is easy to analyse many .dbproj files at the same time. Below is Kevin’s code which I have tweaked ever so slightly so that it produces the same results as my SQL script (I just want any object that had had a warning suppressed whereas Kevin was querying specifically for warning 4151):   cd 'C:\Temp\QueryingProjectFileDemo\' cls $projects = ls -r -i *.dbproj Foreach($project in $projects) { $xml = new-object System.Xml.XmlDocument $xml.set_PreserveWhiteSpace( $true ) $xml.Load($project) #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings=4151]/@Include"} #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[contains(e:SuppressWarnings,'4151')]/@Include"} $xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings]/@Include"} $ns = @{ e = "http://schemas.microsoft.com/developer/msbuild/2003" } $xml | Select-Xml -XPath $xpath.Start -Namespace $ns |Select -Expand Node | Select -expand Value } and here’s the output: Nice reusable Powershell and SQL scripts – not bad for an evening’s work. Thank you to Kevin for allowing me to share his code. Don’t forget that these techniques can easily be adapted to query any Visual Studio project file, they’re only XML documents after all! Doubtless many people out there already have code for doing this but nonetheless here is another offering to the great script library in the sky. Have fun! @Jamiet

    Read the article

  • Remote Debug Windows Azure Cloud Service

    - by Shaun
    Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Big Data – Operational Databases Supporting Big Data – RDBMS and NoSQL – Day 12 of 21

    - by Pinal Dave
    In yesterday’s blog post we learned the importance of the Cloud in the Big Data Story. In this article we will understand the role of Operational Databases Supporting Big Data Story. Even though we keep on talking about Big Data architecture, it is extremely crucial to understand that Big Data system can’t just exist in the isolation of itself. There are many needs of the business can only be fully filled with the help of the operational databases. Just having a system which can analysis big data may not solve every single data problem. Real World Example Think about this way, you are using Facebook and you have just updated your information about the current relationship status. In the next few seconds the same information is also reflected in the timeline of your partner as well as a few of the immediate friends. After a while you will notice that the same information is now also available to your remote friends. Later on when someone searches for all the relationship changes with their friends your change of the relationship will also show up in the same list. Now here is the question – do you think Big Data architecture is doing every single of these changes? Do you think that the immediate reflection of your relationship changes with your family member is also because of the technology used in Big Data. Actually the answer is Facebook uses MySQL to do various updates in the timeline as well as various events we do on their homepage. It is really difficult to part from the operational databases in any real world business. Now we will see a few of the examples of the operational databases. Relational Databases (This blog post) NoSQL Databases (This blog post) Key-Value Pair Databases (Tomorrow’s post) Document Databases (Tomorrow’s post) Columnar Databases (The Day After’s post) Graph Databases (The Day After’s post) Spatial Databases (The Day After’s post) Relational Databases We have earlier discussed about the RDBMS role in the Big Data’s story in detail so we will not cover it extensively over here. Relational Database is pretty much everywhere in most of the businesses which are here for many years. The importance and existence of the relational database are always going to be there as long as there are meaningful structured data around. There are many different kinds of relational databases for example Oracle, SQL Server, MySQL and many others. If you are looking for Open Source and widely accepted database, I suggest to try MySQL as that has been very popular in the last few years. I also suggest you to try out PostgreSQL as well. Besides many other essential qualities PostgreeSQL have very interesting licensing policies. PostgreSQL licenses allow modifications and distribution of the application in open or closed (source) form. One can make any modifications and can keep it private as well as well contribute to the community. I believe this one quality makes it much more interesting to use as well it will play very important role in future. Nonrelational Databases (NOSQL) We have also covered Nonrelational Dabases in earlier blog posts. NoSQL actually stands for Not Only SQL Databases. There are plenty of NoSQL databases out in the market and selecting the right one is always very challenging. Here are few of the properties which are very essential to consider when selecting the right NoSQL database for operational purpose. Data and Query Model Persistence of Data and Design Eventual Consistency Scalability Though above all of the properties are interesting to have in any NoSQL database but the one which most attracts to me is Eventual Consistency. Eventual Consistency RDBMS uses ACID (Atomicity, Consistency, Isolation, Durability) as a key mechanism for ensuring the data consistency, whereas NonRelational DBMS uses BASE for the same purpose. Base stands for Basically Available, Soft state and Eventual consistency. Eventual consistency is widely deployed in distributed systems. It is a consistency model used in distributed computing which expects unexpected often. In large distributed system, there are always various nodes joining and various nodes being removed as they are often using commodity servers. This happens either intentionally or accidentally. Even though one or more nodes are down, it is expected that entire system still functions normally. Applications should be able to do various updates as well as retrieval of the data successfully without any issue. Additionally, this also means that system is expected to return the same updated data anytime from all the functioning nodes. Irrespective of when any node is joining the system, if it is marked to hold some data it should contain the same updated data eventually. As per Wikipedia - Eventual consistency is a consistency model used in distributed computing that informally guarantees that, if no new updates are made to a given data item, eventually all accesses to that item will return the last updated value. In other words -  Informally, if no additional updates are made to a given data item, all reads to that item will eventually return the same value. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

    - by Bertrand Matthelié
    Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

    Read the article

  • Better documentation for tasks waiting on resources

    - by SQLOS Team
    The sys.dm_os_waiting_tasks DMV contains a wealth of useful information about tasks waiting on a resource, but until now detailed information about the resource being consumed - sys.dm_os_waiting_tasks.resource_description - hasn't been documented, apart from a rather self-evident "Description of the resource that is being consumed."   Thanks to a recent Connect suggestion this column will get more information added. Here is a summary of the possible values that can appear in this column - Note this information is current for SQL Server 2008 R2 and Denali:   Thread-pool resource owner:•       threadpool id=scheduler<hex-address> Parallel query resource owner:•       exchangeEvent id={Port|Pipe}<hex-address> WaitType=<exchange-wait-type> nodeId=<exchange-node-id> Exchange-wait-type can be one of the following.•       e_waitNone•       e_waitPipeNewRow•       e_waitPipeGetRow•       e_waitSynchronizeConsumerOpen•       e_waitPortOpen•       e_waitPortClose•       e_waitRange Lock resource owner:<type-specific-description> id=lock<lock-hex-address> mode=<mode> associatedObjectId=<associated-obj-id>               <type-specific-description> can be:• For DATABASE: databaselock subresource=<databaselock-subresource> dbid=<db-id>• For FILE: filelock fileid=<file-id> subresource=<filelock-subresource> dbid=<db-id>• For OBJECT: objectlock lockPartition=<lock-partition-id> objid=<obj-id> subresource=<objectlock-subresource> dbid=<db-id>• For PAGE: pagelock fileid=<file-id> pageid=<page-id> dbid=<db-id> subresource=<pagelock-subresource>• For Key: keylock  hobtid=<hobt-id> dbid=<db-id>• For EXTENT: extentlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For RID: ridlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For APPLICATION: applicationlock hash=<hash> databasePrincipalId=<role-id> dbid=<db-id>• For METADATA: metadatalock subresource=<metadata-subresource> classid=<metadatalock-description> dbid=<db-id>• For HOBT: hobtlock hobtid=<hobt-id> subresource=<hobt-subresource> dbid=<db-id>• For ALLOCATION_UNIT: allocunitlock hobtid=<hobt-id> subresource=<alloc-unit-subresource> dbid=<db-id> <mode> can be:• Sch-S• Sch-M• S• U• X• IS• IU• IX• SIU• SIX• UIX• BU• RangeS-S• RangeS-U• RangeI-N• RangeI-S• RangeI-U• RangeI-X• RangeX-S• RangeX-U• RangeX-X External resource owner:•       External ExternalResource=<wait-type> Generic resource owner:•       TransactionMutex TransactionInfo Workspace=<workspace-id>•       Mutex•       CLRTaskJoin•       CLRMonitorEvent•       CLRRWLockEvent•       resourceWait Latch resource owner:•       <db-id>:<file-id>:<page-in-file>•       <GUID>•       <latch-class> (<latch-address>)   Further Information Slava Oks's weblog: sys.dm_os_waiting_tasks.Informit.com: Identifying Blocking Using sys.dm_os_waiting_tasks - Ken Henderson   - Guy

    Read the article

  • Announcing the New Windows Azure Web Sites Shared Scaling Tier

    - by Clint Edmonson
    Windows Azure Web Sites has added a new pricing tier that will solve the #1 blocker for the web development community. The shared tier now supports custom domain names mapped to shared-instance web sites. This post will outline the plan changes and elaborate on how the new pricing model makes Windows Azure Web Sites an even richer option for web development shops of all sizes. Free Shared Reserved # of Sites 10 100 100 Egress 165MB/Day 5GB/Month Included 5GB/Month Included Storage 1GB 1GB 10GB Throttling CPU/Memory/Egress CPU/Memory Unlimited Price Free $.02/hr per site, per instance $.08/hr per core Setting the Stage In June, we released the first public preview of Windows Azure Web Sites, which gave web developers a great platform on which to get web sites running using their web development framework of choice. PHP, Node.js, classic ASP, and ASP.NET developers can all utilize the Windows Azure platform to create and launch their web sites. Likewise, these developers have a series of data storage options using Windows Azure SQL Databases, MySQL, or Windows Azure Storage. The Windows Azure Web Sites free offer enabled startups to get their site up and running on Windows Azure with a minimal investment, and with multiple deployment and continuous integration features such as Git, Team Foundation Services, FTP, and Web Deploy.  The response to the Windows Azure Web Sites offer has been overwhelmingly positive. Since the addition of the service on June 12th, tens of thousands of web sites have been deployed to Windows Azure and the volume of adoption is increasing every week. Preview Feedback In spite of the growth and success of the product, the community has had questions about features lacking in the free preview offer. The main question web developers asked regarding Windows Azure Web Sites relates to the lack of the free offer’s support for domain name mapping. During the preview launch period, customer feedback made it obvious that the lack of domain name mapping support was an area of concern. We’re happy to announce that this #1 request has been delivered as a feature of the new shared plan. New Shared Tier Portal Features In the screen shot below, the “Scale” tab in the portal shows the new tiers – Free, Shared, and Reserved – and gives the user the ability to quickly move any of their free web sites into the shared tier. With a single mouse-click, the user can move their site into the shared tier. Once a site has been moved into the shared tier, a new Manage Domains button appears in the bottom action bar of the Windows Azure Portal giving site owners the ability to manage their domain names for a shared site. This button brings up the domain-management dialog, which can be used to enter in a specific domain name that will be mapped to the Windows Azure Web Site. Shared Tier Benefits Startups and large web agencies will both benefit from this plan change. Here are a few examples of scenarios which fit the new pricing model: Startups no longer have to select the reserved plan to map domain names to their sites. Instead, they can use the free option to develop their sites and choose on a site-by-site basis which sites they elect to move into the shared plan, paying only for the sites that are finished and ready to be domain-mapped Agencies who manage dozens of sites will realize a lower cost of ownership over the long term by moving their sites into reserved mode. Once multi-site companies reach a certain price point in the shared tier, it is much more cost-effective to move sites to a reserved tier.  Long-term, it’s easy to see how the new Windows Azure Web Sites shared pricing tier makes Windows Azure Web Sites it a great choice for both startups and agency customers, as it enables rapid growth and upgrades while keeping the cost to a minimum. Large agencies will be able to have all of their sites in their own instances, and startups will have the capability to scale up to multiple-shared instances for minimal cost and eventually move to reserved instances without worrying about the need to incur continually additional costs. Customers can feel confident they have the power of the Microsoft Windows Azure brand and our world-class support, at prices competitive in the market. Plus, in addition to realizing the cost savings, they’ll have the whole family of Windows Azure features available. Continuous Deployment from GitHub and CodePlex Along with this new announcement are two other exciting new features. I’m proud to announce that web developers can now publish their web sites directly from CodePlex or GitHub.com repositories. Once connections are established between these services and your web sites, Windows Azure will automatically be notified every time a check-in occurs. This will then trigger Windows Azure to pull the source and compile/deploy the new version of your app to your web site automatically. Walk-through videos on how to perform these functions are below: Publishing to an Azure Web Site from CodePlex Publishing to an Azure Web Site from GitHub.com These changes, as well as the enhancements to the reserved plan model, make Windows Azure Web Sites a truly competitive hosting option. It’s never been easier or cheaper for a web developer to get up and running. Check out the free Windows Azure web site offering and see for yourself. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

    Read the article

  • Windows Azure Recipe: Enterprise LOBs

    - by Clint Edmonson
    Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

    Read the article

  • WebLogic JDBC Use of Oracle Wallet for SSL

    - by Steve Felts
    Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

    Read the article

  • Application Development: Python or Java (or PHP)

    - by luckysmack
    I'm looking to get into application development, such as Facebook or Android apps and games. I am doing this for fun and to learn. Once my skills are to par I would like to have some side income from the apps, but I'm not banking on living off that (just so you know where I'm coming from and know what my end goals are). Currently I know and am familiar with PHP and frameworks such as cakephp and yii. However, I have been wanting to learn another language to broaden my horizons and to become a better developer. So I have narrowed it down to 2 languages. Python, and Java (I can already hear people cringing at the difference in the languages I have chosen, but I have some reasons). Python: closer to PHP that Java. Cross platformability. Also great as a general scripting language and has many file system level benefits that PHP does not. Cleaner syntax, readability, blah blah and the list goed on. Python will work great for cross platform apps and can be run on many OS's and is supported by Facebook for app development. But there is no support on Android (for full fledged apps). Java: a much stronger typed language, very robust community and corporate backing. Knowing Java is also good for personal marketability for enterprises, if you're into that. The main benefit here is that Java can write apps natively for Android and the apps can be ported for web versions to play on Facebook. So while I have seen many developers prefer Java over the two, Java has this significant advantage, where I can market my apps in both markets and in the future build more potential income. But like I said it is for fun. While money isn't the goal, it would still be nice. PHP: I'm putting this here because I know it already, and I'm sure a case could be made for it. It obviously works great for Facebook but like Python does not do so well on android. While it's mostly the realm of 'application development' that appeals to me, I do find Android apps fairly interesting and something that has a ton of potential to. But then again Facebook has a ton more users and the apps can also potentially be more immersive (desktop vs. mobile). So this is why I'm kinda stuck on what route to choose. Python for Facebook and web apps, with likely faster development to production times, or Java which can be developed for any of the platforms to make apps. Side note: I'm not really trying to get into 3D development, mostly 2D. And I also want to make an app with real-time play (websockets, etc). Someone mentioned node, js to me for that but Python seems to be more globally versatile for my goals. So, to anyone that does Facebook or Android development in either language: what do you suggest? Any input is valuable and I do appreciate it. And sorry for being long winded. EDIT: as mentioned in one of the answers, my primary goal is gaming. Although I do have some plans for non gaming apps such as general web based and desktop based ones. But gaming is my main goal with the possibility of income. EDIT: Another consideration could be Jython. Writing Python code which is converted into Java bytecode. This would allow the ability to do Android apps using Python. I could be wrong though, I'm still looking into it. Update 1-26-11: I recently acquired a new job which required I learn .NET using C#. Im sure some of you are cringing already but I really like the whole system and how it all works together between desktop and web development. But, as I am still interested in Python very much, and after some research I have decided I will learn Python as well as the IronPython implementation for .NET. But (again: I know...) since .NET is mostly a Windows thing and not as cross-compatible as I like, I will be learning Mono which is a cross platform implementation of .NET where I can use what I learn at work using C# and what I want to learn, Python/IronPython. So while learning and writing C#/.NET @ work I will be learning Python - Mono - Iron Python for what I want to do personally. And the benefit of them all being very closely related will help me out a lot, I think. What do you guys think? I almost feel like that should be another question, but there's not much of a question. Either way, you guys gave very helpful input.

    Read the article

  • ASP.NET: Using pickup directory for outgoing e-mails

    - by DigiMortal
    Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net>   <mailSettings>     <smtp deliveryMethod="SpecifiedPickupDirectory">       <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/>     </smtp>   </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net>   <mailSettings>     <smtp deliveryMethod="PickupDirectoryFromIis" />   </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

    Read the article

  • Computer Networks UNISA - Chap 15 &ndash; Network Management

    - by MarkPearl
    After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

    Read the article

  • Get data from MySQL to Android application

    - by Mona
    I want to get data from MySQL database using PHP and display it in Android activity. I code it and pass JSON Array but there is a problem i dont know how to connect to server and my all database is on local server. I code it Kindly tell me where i go wrong so I can get exact results. I'll be very thankful to you. My PHP code is: <?php $response = array(); require_once __DIR__ . '/db_connect.php'; $db = new DB_CONNECT(); if (isset($_GET["cid"])) { $cid = $_GET['cid']; // get a product from products table $result = mysql_query("SELECT *FROM my_task WHERE cid = $cid"); if (!empty($result)) { // check for empty result if (mysql_num_rows($result) > 0) { $result = mysql_fetch_array($result); $task = array(); $task["cid"] = $result["cid"]; $task["cus_name"] = $result["cus_name"]; $task["contact_number"] = $result["contact_number"]; $task["ticket_no"] = $result["ticket_no"]; $task["task_detail"] = $result["task_detail"]; // success $response["success"] = 1; // user node $response["task"] = array(); array_push($response["my_task"], $task); // echoing JSON response echo json_encode($response); } else { // no task found $response["success"] = 0; $response["message"] = "No product found"; // echo no users JSON echo json_encode($response); } } else { // no task found $response["success"] = 0; $response["message"] = "No product found"; echo json_encode($response); } } else { $response["success"] = 0; $response["message"] = "Required field(s) is missing"; // echoing JSON response echo json_encode($response);} ?> My Android code is: public class My_Task extends Activity { TextView cus_name_txt, contact_no_txt, ticket_no_txt, task_detail_txt; EditText attend_by_txtbx, cus_name_txtbx, contact_no_txtbx, ticket_no_txtbx, task_detail_txtbx; Button btnSave; Button btnDelete; String cid; // Progress Dialog private ProgressDialog tDialog; // Creating JSON Parser object JSONParser jParser = new JSONParser(); ArrayList<HashMap<String, String>> my_taskList; // single task url private static final String url_read_mytask = "http://198.168.0.29/mobile/read_My_Task.php"; // url to update product private static final String url_update_mytask = "http://198.168.0.29/mobile/update_mytask.php"; // url to delete product private static final String url_delete_mytask = "http://198.168.0.29/mobile/delete_mytask.php"; // JSON Node names private static String TAG_SUCCESS = "success"; private static String TAG_MYTASK = "my_task"; private static String TAG_CID = "cid"; private static String TAG_NAME = "cus_name"; private static String TAG_CONTACT = "contact_number"; private static String TAG_TICKET = "ticket_no"; private static String TAG_TASKDETAIL = "task_detail"; private static String attend_by_txt; // task JSONArray JSONArray my_task = null; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.my_task); cus_name_txt = (TextView) findViewById(R.id.cus_name_txt); contact_no_txt = (TextView)findViewById(R.id.contact_no_txt); ticket_no_txt = (TextView)findViewById(R.id.ticket_no_txt); task_detail_txt = (TextView)findViewById(R.id.task_detail_txt); attend_by_txtbx = (EditText)findViewById(R.id.attend_by_txt); attend_by_txtbx.setText(My_Task.attend_by_txt); Spinner severity = (Spinner) findViewById(R.id.severity_spinner); // Create an ArrayAdapter using the string array and a default spinner layout ArrayAdapter<CharSequence> adapter3 = ArrayAdapter.createFromResource(this, R.array.Severity_array, android.R.layout.simple_dropdown_item_1line); // Specify the layout to use when the list of choices appears adapter3.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); // Apply the adapter to the spinner severity.setAdapter(adapter3); // save button btnSave = (Button) findViewById(R.id.btnSave); btnDelete = (Button) findViewById(R.id.btnDelete); // getting product details from intent Intent i = getIntent(); // getting product id (pid) from intent cid = i.getStringExtra(TAG_CID); // Getting complete product details in background thread new GetProductDetails().execute(); // save button click event btnSave.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View arg0) { // starting background task to update product new SaveProductDetails().execute(); } }); // Delete button click event btnDelete.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View arg0) { // deleting product in background thread new DeleteProduct().execute(); } }); } /** * Background Async Task to Get complete product details * */ class GetProductDetails extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Loading task details. Please wait..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Getting product details in background thread * */ protected String doInBackground(String... params) { // updating UI from Background Thread runOnUiThread(new Runnable() { public void run() { // Check for success tag int success; try { // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("cid", cid)); // getting product details by making HTTP request // Note that product details url will use GET request JSONObject json = JSONParser.makeHttpRequest( url_read_mytask, "GET", params); // check your log for json response Log.d("Single Task Details", json.toString()); // json success tag success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully received product details JSONArray my_taskObj = json .getJSONArray(TAG_MYTASK); // JSON Array // get first product object from JSON Array JSONObject my_task = my_taskObj.getJSONObject(0); // task with this cid found // Edit Text // display task data in EditText cus_name_txtbx = (EditText) findViewById(R.id.cus_name_txt); cus_name_txtbx.setText(my_task.getString(TAG_NAME)); contact_no_txtbx = (EditText) findViewById(R.id.contact_no_txt); contact_no_txtbx.setText(my_task.getString(TAG_CONTACT)); ticket_no_txtbx = (EditText) findViewById(R.id.ticket_no_txt); ticket_no_txtbx.setText(my_task.getString(TAG_TICKET)); task_detail_txtbx = (EditText) findViewById(R.id.task_detail_txt); task_detail_txtbx.setText(my_task.getString(TAG_TASKDETAIL)); } else { // task with cid not found } } catch (JSONException e) { e.printStackTrace(); } } }); return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once got all details tDialog.dismiss(); } } /** * Background Async Task to Save product Details * */ class SaveProductDetails extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Saving task ..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Saving product * */ protected String doInBackground(String... args) { // getting updated data from EditTexts String cus_name = cus_name_txt.getText().toString(); String contact_no = contact_no_txt.getText().toString(); String ticket_no = ticket_no_txt.getText().toString(); String task_detail = task_detail_txt.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair(TAG_CID, cid)); params.add(new BasicNameValuePair(TAG_NAME, cus_name)); params.add(new BasicNameValuePair(TAG_CONTACT, contact_no)); params.add(new BasicNameValuePair(TAG_TICKET, ticket_no)); params.add(new BasicNameValuePair(TAG_TASKDETAIL, task_detail)); // sending modified data through http request // Notice that update product url accepts POST method JSONObject json = JSONParser.makeHttpRequest(url_update_mytask, "POST", params); // check json success tag try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully updated Intent i = getIntent(); // send result code 100 to notify about product update setResult(100, i); finish(); } else { // failed to update product } } catch (JSONException e) { e.printStackTrace(); } return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once product uupdated tDialog.dismiss(); } } /***************************************************************** * Background Async Task to Delete Product * */ class DeleteProduct extends AsyncTask<String, String, String> { /** * Before starting background thread Show Progress Dialog * */ @Override protected void onPreExecute() { super.onPreExecute(); tDialog = new ProgressDialog(My_Task.this); tDialog.setMessage("Deleting Product..."); tDialog.setIndeterminate(false); tDialog.setCancelable(true); tDialog.show(); } /** * Deleting product * */ protected String doInBackground(String... args) { // Check for success tag int success; try { // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("cid", cid)); // getting product details by making HTTP request JSONObject json = JSONParser.makeHttpRequest( url_delete_mytask, "POST", params); // check your log for json response Log.d("Delete Task", json.toString()); // json success tag success = json.getInt(TAG_SUCCESS); if (success == 1) { // product successfully deleted // notify previous activity by sending code 100 Intent i = getIntent(); // send result code 100 to notify about product deletion setResult(100, i); finish(); } } catch (JSONException e) { e.printStackTrace(); } return null; } /** * After completing background task Dismiss the progress dialog * **/ protected void onPostExecute(String file_url) { // dismiss the dialog once product deleted tDialog.dismiss(); } } public void onItemSelected(AdapterView<?> parent, View view, int pos, long id) { // An item was selected. You can retrieve the selected item using // parent.getItemAtPosition(pos) } public void onNothingSelected(AdapterView<?> parent) { // Another interface callback } } My JSONParser code is: public class JSONParser { static InputStream is = null; static JSONObject jObj = null; static String json = ""; // constructor public JSONParser() { } // function get json from url // by making HTTP POST or GET mehtod public static JSONObject makeHttpRequest(String url, String method, List<NameValuePair> params) { // Making HTTP request try { // check for request method if(method == "POST"){ // request method is POST // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); httpPost.setEntity(new UrlEncodedFormEntity(params)); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); }else if(method == "GET"){ // request method is GET DefaultHttpClient httpClient = new DefaultHttpClient(); String paramString = URLEncodedUtils.format(params, "utf-8"); url += "?" + paramString; HttpGet httpGet = new HttpGet(url); HttpResponse httpResponse = httpClient.execute(httpGet); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); json = sb.toString(); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; my all database is in localhost and it is not opening an activity. displays an error "Stopped unexpectedly":( How can i get exact results. Kindly guide me

    Read the article

  • Loading XML file containing leading zeros with SSIS preserving the zeros

    - by Compudicted
    Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

    Read the article

  • A*, Tile costs and heuristic; How to approach

    - by Kevin Toet
    I'm doing exercises in tile games and AI to improve my programming. I've written a highly unoptimised pathfinder that does the trick and a simple tile class. The first problem i ran into was that the heuristic was rounded to int's which resulted in very straight paths. Resorting a Euclidian Heuristic seemed to fixed it as opposed to use the Manhattan approach. The 2nd problem I ran into was when i tried added tile costs. I was hoping to use the value's of the flags that i set on the tiles but the value's were too small to make the pathfinder consider them a huge obstacle so i increased their value's but that breaks the flags a certain way and no paths were found anymore. So my questions, before posting the code, are: What am I doing wrong that the Manhatten heuristic isnt working? What ways can I store the tile costs? I was hoping to (ab)use the enum flags for this The path finder isnt considering the chance that no path is available, how do i check this? Any code optimisations are welcome as I'd love to improve my coding. public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map ) { return FindPath( startTile, endTile, map, TileFlags.WALKABLE ); } public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map, TileFlags acceptedFlags ) { List<Tile> open = new List<Tile>(); List<Tile> closed = new List<Tile>(); open.Add( startTile ); Tile tileToCheck; do { tileToCheck = open[0]; closed.Add( tileToCheck ); open.Remove( tileToCheck ); for( int i = 0; i < tileToCheck.neighbors.Count; i++ ) { Tile tile = tileToCheck.neighbors[ i ]; //has the node been processed if( !closed.Contains( tile ) && ( tile.flags & acceptedFlags ) != 0 ) { //Not in the open list? if( !open.Contains( tile ) ) { //Set G int G = 10; G += tileToCheck.G; //Set Parent tile.parentX = tileToCheck.x; tile.parentY = tileToCheck.y; tile.G = G; //tile.H = Math.Abs(endTile.x - tile.x ) + Math.Abs( endTile.y - tile.y ) * 10; //TODO omg wtf and other incredible stories tile.H = Vector2.Distance( new Vector2( tile.x, tile.y ), new Vector2(endTile.x, endTile.y) ); tile.Cost = tile.G + tile.H + (int)tile.flags; //Calculate H; Manhattan style open.Add( tile ); } //Update the cost if it is else { int G = 10;//cost of going to non-diagonal tiles G += map[ tile.parentX, tile.parentY ].G; //If this path is shorter (G cost is lower) then change //the parent cell, G cost and F cost. if ( G < tile.G ) //if G cost is less, { tile.parentX = tileToCheck.x; //change the square's parent tile.parentY = tileToCheck.y; tile.G = G;//change the G cost tile.Cost = tile.G + tile.H + (int)tile.flags; // add terrain cost } } } } //Sort costs open = open.OrderBy( o => o.Cost).ToList(); } while( tileToCheck != endTile ); closed.Reverse(); List<Tile> validRoute = new List<Tile>(); Tile currentTile = closed[ 0 ]; validRoute.Add( currentTile ); do { //Look up the parent of the current cell. currentTile = map[ currentTile.parentX, currentTile.parentY ]; currentTile.renderer.material.color = Color.green; //Add tile to list validRoute.Add( currentTile ); } while ( currentTile != startTile ); validRoute.Reverse(); return validRoute; } And my Tile class: [Flags] public enum TileFlags: int { NONE = 0, DIRT = 1, STONE = 2, WATER = 4, BUILDING = 8, //handy WALKABLE = DIRT | STONE | NONE, endofenum } public class Tile : MonoBehaviour { //Tile Properties public int x, y; public TileFlags flags = TileFlags.DIRT; public Transform cachedTransform; //A* properties public int parentX, parentY; public int G; public float Cost; public float H; public List<Tile> neighbors = new List<Tile>(); void Awake() { cachedTransform = transform; } }

    Read the article

  • Level of detail algorithm not functioning correctly

    - by Darestium
    I have been working on this problem for months; I have been creating Planet Generator of sorts, after more than 6 months of work I am no closer to finishing it then I was 4 months ago. My problem; The terrain does not subdivide in the correct locations properly, it almost seems as if there is a ghost camera next to me, and the quads subdivide based on the position of this "ghost camera". Here is a video of the broken program: http://www.youtube.com/watch?v=NF_pHeMOju8 The best example of the problem occurs around 0:36. For detail limiting, I am going for a chunked LOD approach, which subdivides the terrain based on how far you are away from it. I use a "depth table" to determine how many subdivisions should take place. void PQuad::construct_depth_table(float distance) { tree[0] = -1; for (int i = 1; i < MAX_DEPTH; i++) { tree[i] = distance; distance /= 2.0f; } } The chuncked LOD relies on the child/parent structure of quads, the depth is determined by a constant e.g: if the constant is 6, there are six levels of detail. The quads which should be drawn go through a distance test from the player to the centre of the quad. void PQuad::get_recursive(glm::vec3 player_pos, std::vector<PQuad*>& out_children) { for (size_t i = 0; i < children.size(); i++) { children[i].get_recursive(player_pos, out_children); } if (this->should_draw(player_pos) || this->depth == 0) { out_children.emplace_back(this); } } bool PQuad::should_draw(glm::vec3 player_position) { float distance = distance3(player_position, centre); if (distance < tree[depth]) { return true; } return false; } The root quad has four children which could be visualized like the following: [] [] [] [] Where each [] is a child. Each child has the same amount of children up until the detail limit, the quads which have are 6 iterations deep are leaf nodes, these nodes have no children. Each node has a corresponding Mesh, each Mesh structure has 16x16 Quad-shapes, each Mesh's Quad-shapes halves in size each detail level deeper - creating more detail. void PQuad::construct_children() { // Calculate the position of the Quad based on the parent's location calculate_position(); if (depth < (int)MAX_DEPTH) { children.reserve((int)NUM_OF_CHILDREN); for (int i = 0; i < (int)NUM_OF_CHILDREN; i++) { children.emplace_back(PQuad(this->face_direction, this->radius)); PQuad *child = &children.back(); child->set_depth(depth + 1); child->set_child_index(i); child->set_parent(this); child->construct_children(); } } else { leaf = true; } } The following function creates the vertices for each quad, I feel that it may play a role in the problem - I just can't determine what is causing the problem. void PQuad::construct_vertices(std::vector<glm::vec3> *vertices, std::vector<Color3> *colors) { vertices->reserve(quad_width * quad_height); for (int y = 0; y < quad_height; y++) { for (int x = 0; x < quad_width; x++) { switch (face_direction) { case YIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, quad_height - 1.0f, -(position.y + y * element_width))); break; case YDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, 0.0f, -(position.y + y * element_width))); break; case XIncreasing: vertices->emplace_back(glm::vec3(quad_width - 1.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case XDecreasing: vertices->emplace_back(glm::vec3(0.0f, position.y + y * element_width, -(position.x + x * element_width))); break; case ZIncreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, 0.0f)); break; case ZDecreasing: vertices->emplace_back(glm::vec3(position.x + x * element_width, position.y + y * element_width, -(quad_width - 1.0f))); break; } // Position the bottom, right, front vertex of the cube from being (0,0,0) to (-16, -16, 16) (*vertices)[vertices->size() - 1] -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); colors->emplace_back(Color3(255.0f, 255.0f, 255.0f, false)); } } switch (face_direction) { case YIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, quad_height - 1.0f, -(position.y + quad_height / 2.0f)); break; case YDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, 0.0f, -(position.y + quad_height / 2.0f)); break; case XIncreasing: this->centre = glm::vec3(quad_width - 1.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case XDecreasing: this->centre = glm::vec3(0.0f, position.y + quad_height / 2.0f, -(position.x + quad_width / 2.0f)); break; case ZIncreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, 0.0f); break; case ZDecreasing: this->centre = glm::vec3(position.x + quad_width / 2.0f, position.y + quad_height / 2.0f, -(quad_height - 1.0f)); break; } this->centre -= glm::vec3(quad_width / 2.0f, quad_width / 2.0f, -(quad_width / 2.0f)); } Any help in discovering what is causing this "subdivding in the wrong place" would be greatly appreciated.

    Read the article

  • Namespaces are obsolete

    - by Bertrand Le Roy
    To those of us who have been around for a while, namespaces have been part of the landscape. One could even say that they have been defining the large-scale features of the landscape in question. However, something happened fairly recently that I think makes this venerable structure obsolete. Before I explain this development and why it’s a superior concept to namespaces, let me recapitulate what namespaces are and why they’ve been so good to us over the years… Namespaces are used for a few different things: Scope: a namespace delimits the portion of code where a name (for a class, sub-namespace, etc.) has the specified meaning. Namespaces are usually the highest-level scoping structures in a software package. Collision prevention: name collisions are a universal problem. Some systems, such as jQuery, wave it away, but the problem remains. Namespaces provide a reasonable approach to global uniqueness (and in some implementations such as XML, enforce it). In .NET, there are ways to relocate a namespace to avoid those rare collision cases. Hierarchy: programmers like neat little boxes, and especially boxes within boxes within boxes. For some reason. Regular human beings on the other hand, tend to think linearly, which is why the Windows explorer for example has tried in a few different ways to flatten the file system hierarchy for the user. 1 is clearly useful because we need to protect our code from bleeding effects from the rest of the application (and vice versa). A language with only global constructs may be what some of us started programming on, but it’s not desirable in any way today. 2 may not be always reasonably worth the trouble (jQuery is doing fine with its global plug-in namespace), but we still need it in many cases. One should note however that globally unique names are not the only possible implementation. In fact, they are a rather extreme solution. What we really care about is collision prevention within our application. What happens outside is irrelevant. 3 is, more than anything, an aesthetical choice. A common convention has been to encode the whole pedigree of the code into the namespace. Come to think about it, we never think we need to import “Microsoft.SqlServer.Management.Smo.Agent” and that would be very hard to remember. What we want to do is bring nHibernate into our app. And this is precisely what you’ll do with modern package managers and module loaders. I want to take the specific example of RequireJS, which is commonly used with Node. Here is how you import a module with RequireJS: var http = require("http"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is of course importing a HTTP stack module into the code. There is no noise here. Let’s break this down. Scope (1) is provided by the one scoping mechanism in JavaScript: the closure surrounding the module’s code. Whatever scoping mechanism is provided by the language would be fine here. Collision prevention (2) is very elegantly handled. Whereas relocating is an afterthought, and an exceptional measure with namespaces, it is here on the frontline. You always relocate, using an extremely familiar pattern: variable assignment. We are very much used to managing our local variable names and any possible collision will get solved very easily by picking a different name. Wait a minute, I hear some of you say. This is only taking care of collisions on the client-side, on the left of that assignment. What if I have two libraries with the name “http”? Well, You can better qualify the path to the module, which is what the require parameter really is. As for hierarchical organization, you don’t really want that, do you? RequireJS’ module pattern does elegantly cover the bases that namespaces used to cover, but it also promotes additional good practices. First, it promotes usage of self-contained, single responsibility units of code through the closure-based, stricter scoping mechanism. Namespaces are somewhat more porous, as using/import statements can be used bi-directionally, which leads us to my second point… Sane dependency graphs are easier to achieve and sustain with such a structure. With namespaces, it is easy to construct dependency cycles (that’s bad, mmkay?). With this pattern, the equivalent would be to build mega-components, which are an easier problem to spot than a decay into inter-dependent namespaces, for which you need specialized tools. I really like this pattern very much, and I would like to see more environments implement it. One could argue that dependency injection has some commonalities with this for example. What do you think? This is the half-baked result of some morning shower reflections, and I’d love to read your thoughts about it. What am I missing?

    Read the article

  • Using BizTalk to bridge SQL Job and Human Intervention (Requesting Permission)

    - by Kevin Shyr
    I start off the process with either a BizTalk Scheduler (http://biztalkscheduledtask.codeplex.com/releases/view/50363) or a manual file drop of the XML message.  The manual file drop is to allow the SQL  Job to call a "File Copy" SSIS step to copy the trigger file for the next process and allows SQL  Job to be linked back into BizTalk processing. The Process Trigger XML looks like the following.  It is basically the configuration hub of the business process <ns0:MsgSchedulerTriggerSQLJobReceive xmlns:ns0="urn:com:something something">   <ns0:IsProcessAsync>YES</ns0:IsProcessAsync>   <ns0:IsPermissionRequired>YES</ns0:IsPermissionRequired>   <ns0:BusinessProcessName>Data Push</ns0:BusinessProcessName>   <ns0:EmailFrom>[email protected]</ns0:EmailFrom>   <ns0:EmailRecipientToList>[email protected]</ns0:EmailRecipientToList>   <ns0:EmailRecipientCCList>[email protected]</ns0:EmailRecipientCCList>   <ns0:EmailMessageBodyForPermissionRequest>This message was sent to request permission to start the Data Push process.  The SQL Job to be run is WeeklyProcessing_DataPush</ns0:EmailMessageBodyForPermissionRequest>   <ns0:SQLJobName>WeeklyProcessing_DataPush</ns0:SQLJobName>   <ns0:SQLJobStepName>Push_To_Production</ns0:SQLJobStepName>   <ns0:SQLJobMinToWait>1</ns0:SQLJobMinToWait>   <ns0:PermissionRequestTriggerPath>\\server\ETL-BizTalk\Automation\TriggerCreatedByBizTalk\</ns0:PermissionRequestTriggerPath>   <ns0:PermissionRequestApprovedPath>\\server\ETL-BizTalk\Automation\Approved\</ns0:PermissionRequestApprovedPath>   <ns0:PermissionRequestNotApprovedPath>\\server\ETL-BizTalk\Automation\NotApproved\</ns0:PermissionRequestNotApprovedPath> </ns0:MsgSchedulerTriggerSQLJobReceive>   Every node of this schema was promoted to a distinguished field so that the values can be used for decision making in the orchestration.  The first decision made is on the "IsPermissionRequired" field.     If permission is required (IsPermissionRequired=="YES"), BizTalk will use the configuration info in the XML trigger to format the email message.  Here is the snippet of how the email message is constructed. SQLJobEmailMessage.EmailBody     = new Eai.OrchestrationHelpers.XlangCustomFormatters.RawString(         MsgSchedulerTriggerSQLJobReceive.EmailMessageBodyForPermissionRequest +         "<br><br>" +         "By moving the file, you are either giving permission to the process, or disapprove of the process." +         "<br>" +         "This is the file to move: \"" + PermissionTriggerToBeGenereatedHere +         "\"<br>" +         "(You may find it easier to open the destination folder first, then navigate to the sibling folder to get to this file)" +         "<br><br>" +         "To approve, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestApprovedPath +         "<br><br>" +         "To disapprove, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestNotApprovedPath +         "<br><br>" +         "The file will be IMMEDIATELY picked up by the automated process.  This is normal.  You should receive a message soon that the file is processed." +         "<br>" +         "Thank you!"     ); SQLJobSendNotification(Microsoft.XLANGs.BaseTypes.Address) = "mailto:" + MsgSchedulerTriggerSQLJobReceive.EmailRecipientToList; SQLJobEmailMessage.EmailBody(Microsoft.XLANGs.BaseTypes.ContentType) = "text/html"; SQLJobEmailMessage(SMTP.Subject) = "Requesting Permission to Start the " + MsgSchedulerTriggerSQLJobReceive.BusinessProcessName; SQLJobEmailMessage(SMTP.From) = MsgSchedulerTriggerSQLJobReceive.EmailFrom; SQLJobEmailMessage(SMTP.CC) = MsgSchedulerTriggerSQLJobReceive.EmailRecipientCCList; SQLJobEmailMessage(SMTP.EmailBodyFileCharset) = "UTF-8"; SQLJobEmailMessage(SMTP.SMTPHost) = "localhost"; SQLJobEmailMessage(SMTP.MessagePartsAttachments) = 2;   After the Permission request email is sent, the next step is to generate the actual Permission Trigger file.  A correlation set is used here on SQLJobName and a newly generated GUID field. <?xml version="1.0" encoding="utf-8"?><ns0:SQLJobAuthorizationTrigger xmlns:ns0="somethingsomething"><SQLJobName>Data Push</SQLJobName><CorrelationGuid>9f7c6b46-0e62-46a7-b3a0-b5327ab03753</CorrelationGuid></ns0:SQLJobAuthorizationTrigger> The end user (the human intervention piece) will either grant permission for this process, or deny it, by moving the Permission Trigger file to either the "Approved" folder or the "NotApproved" folder.  A parallel Listen shape is waiting for either response.   The next set of steps decide how the SQL Job is to be called, or whether it is called at all.  If permission denied, it simply sends out a notification.  If permission is granted, then the flag (IsProcessAsync) in the original Process Trigger is used.  The synchonous part is not really synchronous, but a loop timer to check the status within the calling stored procedure (for more information, check out my previous post:  http://geekswithblogs.net/LifeLongTechie/archive/2010/11/01/execute-sql-job-synchronously-for-biztalk-via-a-stored-procedure.aspx)  If it's async, then the sp starts the job and BizTalk sends out an email.   And of course, some error notification:   Footnote: The next version of this orchestration will have an additional parallel line near the Listen shape with a Delay built in and a Loop to send out a daily reminder if no response has been received from the end user.  The synchronous part is used to gather results and execute a data clean up process so that the SQL Job can be re-tried.  There are manu possibilities here.

    Read the article

  • Why bother writing an Windows 8 app?

    - by Dennis Vroegop
    So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

    Read the article

  • Defining scope for Record Count functoid:

    - by ArunManick
    Defining scope for Record Count functoid: Problem: One of the most common scenarios in BizTalk is calculating the record count of repeating structure. BizTalk has come up with an advanced functoid called Record Count functoid which will give the record count for the repeating structure however you cannot define the scope for a Record Count functoid. Because Record Count functoid accepts exactly one parameter which can be repeating record or field element.   If somebody don’t know what “scope” means I will explain with a simple example. Consider that we have a source schema having a structure Country -> State -> City. Country will have various states and each state will have different cities. Now you want to calculate no. of cities present in each state. Here scope is defined at the parent node “State”. Traditional Record Count functoid will give the total no. of cities present in the source message and not the State level city count.   Source Schema:   Destination Schema:   Soultion #1: As the title indicates we are not going to add one more parameter to the record count functoid. Instead of that, we are going to achieve the solution with the help of Scripting functoid with Inline XSLT script. XSLT is basically the transformation language used in the mapping.     “No.OfCities” indicates the destination field name to which we are going to send the value. In count(City), “count” refers to built in XPath function used in XSLT and “City” refers to source schema record name. Here you can find the list of built-in functions available in XSLT.   The mapping will look like as follows:   The 2 Record Count functoids used in this map will give the total number of states and total number of cities as that of input message.   Soultion #2:  If someone doesn’t like XSLT code and they wish to achieve the solution using functoids alone, then here is another solution.   Use logical Existence functoid to check whether “City” exist or not Connect the output of Logical Existence functoid to the Value Mapping functoid with second parameter as constant “1”. Hence if the first parameter is TRUE it will give the output as “1”. Connect the output of Value Mapping functoid to the Cumulative Sum functoid with scope as “1”   This will calculate the City count at the state level. The mapping will look like as follows:     Let us see the sample input and the map output.   Input: <?xml version="1.0" encoding="utf-8"?> <ns0:Country xmlns:ns0="http://RecordCount.Source">   <State>     <StateName>Tamilnadu</StateName>     <City>       <CityName>Pollachi</CityName>     </City>     <City>       <CityName>Coimbatore</CityName>     </City>     <City>       <CityName>Chennai</CityName>     </City>   </State>   <State>     <StateName>Kerala</StateName>     <City>       <CityName>Palakad</CityName>     </City>   </State>   <State>     <StateName>Karnataka</StateName>     <City>       <CityName>Bangalore</CityName>     </City>     <City>       <CityName>Mangalore</CityName>     </City>   </State> </ns0:Country>     Output: <ns0:Country xmlns:ns0="http://RecordCount.Destination">           <No.OfStates>3</No.OfStates>           <No.OfCities>6</No.OfCities>           <States>                    <No.OfCities>3</No.OfCities>           </States>           <States>                    <No.OfCities>1</No.OfCities>           </States>           <States>                    <No.OfCities>2</No.OfCities>           </States> </ns0:Country>   Conclusion: This is my first post and I hope you enjoyed it.   -Arun

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >