Search Results

Search found 10615 results on 425 pages for 'resources sharing'.

Page 191/425 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Laptop connectd to 2 VPNs (1st for Internet over WiFi, 2nd to access shared folders on another network) is failing to route traffic over 2nd VPN

  - by Triynko

  I set up a VPN on Windows Server 2008 through its routing and remote access services. I connected to the VPN, and configured the client to allow for split tunneling (Internet traffic goes to my default gateway, and traffic directed to the VPN server goes through the VPN gateway). I had to adjust the routing table, adding an entry to ensure traffic to my VPN server goes through the tunnel by running the command "route add [VPN.IP] mask 255.255.255.255 [VPN.GATEWAY.IP] IF [VPN_INTERFACE_#]". Adding the correct route makes everything work flawlessly on all my machines, except for one. The problematic machine is a laptop that's not directly connected to a network. It connects to WiFi, and then connects to a VPN to obtain internet access. Finally, it connects to the target VPN server for file sharing. The "route add" trick doesn't work for that laptop, I'm assuming because it's connected to two VPNs, and I'm getting the routing wrong. Can anyone familiar with routing explain what routes I may need to add?

  Read the article

• Network connection on Linux

  - by Kevin

  A general question about network connection on Linux : once a network connection goes into time_wait, is it still tied to the process ? Does it still use resources like say filehandle ? Reason I ask is because once it goes into time_wait, lsof does not report it anymore. I guess that means that the network connection is no longer tied to the process and hence does not count against filehandle limit. Would like to confirm though.

  Read the article

• Stopped windows firewall service during ICS, how is this possible?

  - by insipid

  Although windows firewall is required to be on when you "start" Internet Connection Sharing, you can stop the WF service with MMC. When done a client can still use the host machines internet. The firewall had port 80/http blocked, and now it is open for incoming traffic. However other ports used by applications on the host and client which communicate with each other still seem to be blocked. Can anybody explain what might be happening here? Doesn't ICS need windows firewall for NAT? Note: I am not actually seeing anything in the firewall logs after stopping the service, but even packets sent localhost on the host machine never arriving on these other random ports.

  Read the article

• I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

  - by Bong Paduano

  I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• Creating a file with Puppet with facts from multiple hosts

  - by Belly

  I'm trying to have puppet build a configuration file that looks like this: [All] Hosts=apt-dater@puppetmaster;apt-dater@blaster; (etc...) Basically, this file needs an entry for each node that includes the apt-dater class. I've been experimenting with exported resources, but I can't find a clean way of putting it together. How should I go about creating this file?

  Read the article

• Issues With IIS Hosting Two Domains From Same Folder

  - by Bob Mc

  I have two different domain names that resolve to the same ASP.Net site. Both domains are hosted on the same server, which runs Windows Server 2003 and IIS6. The sites are differentiated in IIS Manager using host headers. However, both of the sites point to the same folder on the local drive for the site's page files. I am occasionally experiencing an ASP.Net error that says "The state information is invalid for this page and might be corrupted." I'm the site developer so I've addressed all the relevant code-related causes for this issue. However, I was wondering whether having two domains/sites sharing the same folder for an ASP.Net application might be causing this intermittent error. Also, is this generally a bad practice? Should I make separate, duplicate folders for each of the domains? Seems like that can become a maintenance headache.

  Read the article

• Only 5 simultaneously users with PPTP VPN?

  - by Plastkort

  we have a windows 2008 R2 standard server which job is to accept incoming VPN connections via PPTP. it seems to work fine, but the moment the 6th user try to connect, we get the following error: ERROR_VPN_DISCONNECT 807 The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. where do we find out how to increase the amount of simultaneously users?, I read somewhere that we can have over 100 connected clients at the same time, when I created this server, I did the following : Network & sharing - Network adapters - File - new incoming connections now I tried to choose and create users here, but we have a domain controller which seems to override this, so the domain users works after this I was able to connect atleast 5 clients... how and where do I increase the "capacity"?

  Read the article

• Folder sync application which can sync over Internet (the other machine specified by an IP)?

  - by Adal

  I need to sync some folders between two Win 7 machines. While they are connected to the same LAN, they can't see each-other over Windows Networking since sharing is disabled on both of them (security reasons). Do you know any sync app which can work over IP? The folder I need to sync has 500,000 files in it (80 GB in total), so the sync app should be pretty efficient. At the moment I copy the files from one machine to the other over FTP, but it takes forever, since a separate connection is opened for each file. Or maybe you know some app which can efficiently transfer a large number of files between two machines on the Internet?

  Read the article

• UID /GID with NFS and ZFS

  - by profy

  Hi, I have a server with a zfs file system (nexenta core), and I'm sharing files overs nfs with zfs share share_nfs. When I mount the file system on my client (a ubuntu workstation) I can't have the original UID/GID :( I mount my client with the following options : 192.168.1.4:/home /media/testnfs nfs rw,dev,noexec,nosuid,auto,nouser,noatime,rsize=8192,wsize=8192 0 0 If I configure idmapd I have nobody:nogroup and without idmapd I have 4294967294:4294967294, how can I get the original ID's ? Is it a problem with the nfs server or the client ? Thanks for answers.

  Read the article

• Hardware recommendations for building an Ubuntu encrypted file server

  - by Robert Mashlan

  I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

  Read the article

• Firefox, reload without cache check

  - by pmoleri

  It looks like a popular question but it's just the opposite. When I visit a site in Firefox 15 I have two different behaviours when: Pressing enter in the address bar Pressing F5 or the refresh button If I look in the network console I can see that F5 does a lot more requests, most of them about cached resources and with a 304-Not Modified answer. Is there's any shortcut to make a quick refresh? Just like pressing enter on the address bar.

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Opensolaris, ZFS shares

  - by Random

  I've recently updated to OpenSolaris 2010.05 from 2009.06. Its currently set up to share one of the the ZFS zpools to the other machines on my network. However, only a single account is able to access these shares. My other accounts get refused when attempting to connect. File permissions are all correct - When logging into the machine directly with the other logins, I can see, and play with the files and directories as normal - Its just the share that gets refused. The interesting thing is, I could access the shares prior to upgrading. Nothing else was changed other than the straight upgrade. I am pretty sure there is no user specific sharing going on. What could be preventing others from accessing this zpool?

  Read the article

• Mac OS X 10.5 VNC Resolution independent of hardware display

  - by Qberticus

  Is it possible to set the VNC display resolution that is independent of the hardware resolution when you are using OS X 10.5 Screen Sharing? I have a macbook and a windows box with 3 monitors. I'd like to use the 3 monitors on my windows box to do work on my macbook when I'm at my desk. When I VNC into the macbook I only get the resolution of the hardware screen (1280x800). Instead I'd like to use two of my monitors on my windows box to display a large VNC screen from my macbook. The scaling options in the VNC clients (TightVNC and Ultr@VNC) do not adjust the actual resolution of the display they just do image processing. My ultimate goal is for someway to have a virtual display on my windows box that is from my macbook that is independent of the macbook's hardware screen.

  Read the article

• Internet Connectivity... Help please!

  - by James

  Hi. My Laptop is having trouble connecting to my wireless router. Other laptops are using the wireless, but it's not reached capacity. The laptop recognises (with a strong signal) that there is wireless internet, and I can connect via the router with a cable because this happens automatically. My problem is this... When I click "connect" (for example in the network and sharing centre), the dialogue box closes and nothing else happens - as though "connect" is being read as "exit". I am running Vista on a Toshiba Satellite Pro P300. Any help would be very much appreciated, Thanks

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• What software can I use to co-ordinate a projector screen?

  - by aakashbhowmick

  When I connect my laptop to a projector, it shows everything that is going-on on my computer. However, I want want to show only certain things to users ( like videos, images, etc ). It would be good if my mouse-motions could be hidden as well. So is there any software using which I can give presentations without sharing my screen with the projector ( that is, it shows what I want it to show rather than mirroring what's going on in my laptop screen ) ?I've serached Google a lot and haven't found a solution as yet. Update : I am using Windows 7 Ultimate Edition. Update : Laptop model: HP Probook 4410s

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• FreeBSD Jail own network stack with vimage

  - by bodokaiser

  I want to throw all services from the host system and put them in jails. Unfortunatly this doesn't work for file sharing (e.g. nfsd) because the jails don't have there own network stack by default. I know read something about vimage which would solve this issue. See more in this thread: http://forums.freebsd.org/showthread.php?t=9006 The use of vimage with raw jails should use moreorless but the use with vimage and ezjail makes it hard. Does anyone have experience about this topic and wants to share it? Regards

  Read the article

• Share iTunes Library from Nas across several clients. How in Windows

  - by Mych

  I found this article http://gigaom.com/apple/one-itunes-library-on-multiple-computers/ which describes sharing a single library with multiple clients. Unfortunately this article is for Macs and I use Windows. The article mentions 3 jobs that need to be completed.' A) - pointing all clients to the location of the Library. This is understandable and I can replicate using windows clients. B) Universal Library Set-up. This mentions holing the option key and double click iTunes icon. This is so you can create the index at a specific location C) Point clients to index. Again this mentions Option double click. What is the Windows equivalent to option double click iTunes?

  Read the article

• Practical way to implement prevention of IP Spoofing

  - by user1369975

  I am an undergraduate Computer Science student and was hoping to gain some knowledge of ways to help prevent IP spoofing but all the resources I have tried out elaborate this concept in a theoretical way. I want to try out my hands at one of the techniques like: http://en.wikipedia.org/wiki/Port_knocking http://en.wikipedia.org/wiki/SYN_cookies How do I simulate this whole situation in my own system were I myself am the attacker and I myself have to defend it? And once I have gained an understanding of it, then how do I start translating that into programming terms?

  Read the article

• How to inspect/modify Windows Firewall rules while the Windows Firewall/ICS service is stopped and disabled?

  - by Kal

  I'm trying to fix up my friend's remote Windows Server 2003 R2 machine. I have Remote Desktop access at the moment. However, I notice that Windows Firewall/Internet Connection Sharing service of the remote machine is disabled, which seems to be a bad idea. If I enable and start the service now, I may lose my Remote Desktop access in case the exception rule for Remode Desktop has not been defined in Windows Firewall. So I need a way to inspect and modify exception rules even as the Windows Firewall/ICS service is stopped and disabled. Does anybody know how?

  Read the article

• OSX : Setup for filestorage in medium business

  - by Franatique

  In our office every machine runs OSX. In search of an ideal storage and sharing solution we decided to let OSX Server handle all account information and auth requests whereas an 7TB QNAP provides NFS shares. All shares are published as mounts in the companywide LDAP. As it turns out, handling permissions in this situation is very clumsy (e.g. inherit permissions on newly created files). Unfortunately using NFS4 in combination with ACLs did not solve the problem. As a possible solution I set up a iSCSI connection between QNAP and the machine running OSX Server which in turn serves the LUN as AFP share. Permission handling works like a charm for this setup. Although I am a bit concerned about the performance of this setup. As we are a fast growing company we expect the solution to serve at least 100 clients while using files aprox. above 100MB each. Are there any known drawbacks of this solution?

  Read the article

• why I am not able to open quickly my maapped drives on 64 bit WIN XP WS

  - by user11222

  I am having two mapped drives on my 64 bit WinXp Ws. I am not getting quick response when I am opening the maaped drives and other network folders it is taking nearly 3 minutes to poen. My network resources also not functioning propely. please help me out .

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >