Search Results

Search found 5727 results on 230 pages for 'overlay icon disappear'.

Page 192/230 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Windows 7 - Wireless Signal Good - Internet Often Says Limited or No Activity

  - by Anthony Trilussa Pizzo

  Hi - I have a New Dell Studio XPS latop that I hooked up in early January of 2010. The Dell Studio XPS laptop is connected to my wireless router (Belkin Wireless N). The router was purchased in Februaru of 2010 because I thought my router was bad (A D-Link router). Comcast is my ISP. Everyday, at random times, the internet will have a good signal (according to the little Win 7 icon on the taskbar) but I will receive a message saying limited or no internet access and I cannot access the internet. I have the internet setup to automatically get an IP and I did the IPCONFIG release / renew but with no success. I even had a WiFi enabled Blackberry right next to my computer and whenever the computer loses an WiFi connection, so does the Blackberry. The router isnt't bad, because the old router did the same thing - giving me limited or no internet access while working sometimes. I also tried using two other laptops in same physical position as my Dell Studio XPS laptop and they have the same problem. I am going crazy trying to figure this out as I have called the Router Company (Belkin), my ISP (Comcast), and my computer maker (Dell). Can anyone offer some suggestions and I can try them as we work through this and maybe one of the suggestion will be right one. Thanks in advance for even reading my problem. I searched for a problem similar to mine on the internet, but I have not been able to keep a steady internet connection. (Side note - I used to have an IBM thinkpad laptop and D - Link router and for years that wireless connection worked FLAWLESSLY, with the same physical set up - the laptop in my bedroom, and the router in the basement.)

  Read the article

• Port forwarding + shared connection with Ubuntu

  - by Joey Adams

  Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

  Read the article

• How do I add additional parameters to query string of a Firefox Search Plugin?

  - by Goto10

  I have just installed the DuckDuckGo add-on in Firefox 11.0, running on XP SP 3. I would like to add additional parameters to the query string. However, any changes I make are not reflected in the query string when doing a search. I found the duckduckgo.xml file at C:\Documents and Settings\User Name\Application Data\Mozilla\Firefox\Profiles\Profile Name.default\searchplugins. I opened it up with Notepad++ and added the line for kl=uk-en: <SearchPlugin xmlns="http://www.mozilla.org/2006/browser/search/" xmlns:os="http://a9.com/-/spec/opensearch/1.1/"> <os:ShortName>DuckDuckGo</os:ShortName> <os:Description>Search DuckDuckGo (SSL)</os:Description> <os:InputEncoding>UTF-8</os:InputEncoding> <os:Image width="16" height="16">data:image/x-icon;base64, -Removed to shorten-</os:Image> <os:Url type="text/html" method="GET" template="https://duckduckgo.com/"> <os:Param name="q" value="{searchTerms}"/> <os:Param name="kl" value="uk-en"/> </os:Url> </SearchPlugin> However, the kl=uk-en parameter does not appear in the query string when searching (despite several Firefox restarts).

  Read the article

• Please insert a disk into SD/MMC - Vista problem [closed]

  - by Naunidh

  Possible Duplicate: Please insert a disk into SD/MMC - Vista problem Hi I tried pushing my 2GB micro SD card using the inbuilt card reader. On clicking the drive I get "Please insert a disk into SD/MMC". This problem is really frustrating. The card works fine on other computers so does the microSD to SD attachment. I have done following o fix. - Updated Vista and installed SP1. - Updated the TI drivers for FlashDrive. - Checked Vaio site for updates (none required). - Added a new entry HKLM\SYSTEM\ControlS* et001\Services\tifm21\Parameters/SDParam=1 took the hint from (http://tinyurl.com/nk33tp) I have restarted the PC multiple times. As soon as I put the card in, the SD/MMC device icon blips, so it seems the hardware is at least detecting something. The card reader was working fine few days back. I guess some windows update has broken something, does any one have any idea on how to proceed. MY laptop is VGN-N365E.

  Read the article

• Can't view other computers on Network

  - by Darkart

  Systems: My Machine: Windows 7 Ultimate connected through ethernet into router Her Machine--Other Machine: Windows 7 Ultimate connected through wireless Router:F5D8236-4 N Wireless Router Version 1 Firmware: 2.01.03 (Apr 28 2009) ISP: Comcast Problem: I can not view the "Other Machine" on the network at all. I opened command prompt and ran net view and saw the pc name. I tried pinging the pc and it times out. Went inside the router and tried viewing the computer on the DHCP list and it can not be seen. I restored the router back to default settings and firmware and completely reset the modem and router, and created home group. I went to the other machine to configure home group settings and made sure that both PC's had identical settings. She was able to see my machine but I could not see hers. I restarted both machines and now we cant see each other at all. Also her PC ("Other Machine") had exclamation mark in the wireless icon but was connected just fine. There is no firewalls on currently or anti-virus enabled, and still can not see each other. Right now I am checking for updated drivers for the wireless card, but my question is could it be the router or something hardware related? I have went through all the settings in the Home group and visited most FAQ's and still no luck. Also as it stands I can not view her machine inside the router DHCP Client List :(

  Read the article

• Can't find standalone Chrome Gmail client that I know exists

  - by Carson

  I'm on Windows. A couple years ago when I switched from Outlook to Gmail (Google Apps), Google provided this awesome little standalone gmail client that was just a single-purpose Chrome install. It launched like a normal application, stayed updated when I updated Chrome. It was Chrome in a separate application that launched only gmail, stayed logged in really well, and "felt" like a gmail mail client, with the gmail interface. It had it's own little red envelope icon, it was a windows app. (I remember there was no Mac equivalent.) I found it while looking through the "this is how you get your company to switch to gmail" documentation that Google provided. I just repaved my box and now I'm looking for this thing again, and I had no idea it would be impossible to find. I've spent literally 2 hours looking, searching, googling, etc. I'm losing my mind. Anyone know how I can get my hands on this? I used it all day every day for 2 years, so I know it exists :), but I can not find it. Any assistance would be gratefully received.

  Read the article

• PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded

  - by Tiny

  I'm trying to upgrade php 5.4.14 from php 5.4.3 in wamp server 2.2e. I have downloaded php-5.4.14-Win32-VC9-x86 (thread safe). Extracted it under C:\wamp\bin\php. Copied wampserver.conf from C:\wamp\bin\php\php5.4.3 to C:\wamp\bin\php\php5.4.14. Renamed php.ini-development to phpForApache.ini. -The port number the wamp server has been changed in the http.conf file to 8087 from its default 80. This is mentioned here though it is about upgrading from php 5.3.5 to php 5.4.0. After this, Restarting of the wamp server and services all over again has all been done and those two versions appeared in the menu php-versions (which is opened when the icon of the server is clicked). But when I attempt to enable a library like php_mysql or php_mysqli, a warning message box appears. PHP Startup: Unable to load dynamic library 'C:"\php\php_mysql.dll' - The specified module could not be loaded. I have also tried to removing the semicolon before them in the php.ini file but to no avail. I'm running Microsoft Windows XP Professional Version 2002, service pack 3. Where might be the problem? EDIT: I have changed extension_dir from C:\php to c:\wamp\bin\php\php5.4.14\ext\ in php.ini as the answer below indicates and the library is now loaded correctly but it says, 1045 - Access denied for user 'root'@'localhost' (using password: YES) though the user name and the password are the same as they are in MySQL in the config.inc.php file under phpmyadmin. I have also tried to restart MySQL56 service from Control Panel-Services(Local) but it keeps giving the same error. Does someone know why this happens?

  Read the article

• Toshiba Qosmio: Battery Stuck at 60%, does not Charges, PC can't power up, can't remain on with out

  - by Fellknight

  Just like the tittle says, now let me try to give some more detail about the symptoms; The battery is stuck at 60 percent (68% at the moment of this writing).When hovering over the battery icon in Windows 7 Home Premium x64 it reads:"68% available (plugged in, charging)", there's no x or any sing the OS is displaying any error. No matter how much time left connected to the AC adapter the battery doesn't charge, it seems however it continues to discharge at its normal rate when disconnected from the laptop (about 1% each 2 weeks). Now this last symptom is the one i find most strange it "seems" the laptop somehow isn't recognizing the battery because even with the remaining charge of 60%(ish) the laptop wont power up or remain on if disconnected from its AC adapter(if it's on and is unplugged it will immediately turn off). Meaning that even with the battery attached correctly in its right place is as if running the laptop with no battery at all. Toshiba's Utilities haven't detected anything strange (or anything for that matter) with the battery or the hardware. The laptop when in use is connected 90% of the time to a Belkin surge protector (like my 1TB EHD). The protector is working correctly (green light on) and the 1TB HD too, thus a power surge having damaged it's very unlikely. Thnx in advance

  Read the article

• xrandr shows two displays (LVDS1), but how can I use VGA1 only?

  - by Tom Fishman

  We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

  Read the article

• Time Machine doesn't back up some folders/files (that it should)

  - by Eric

  MacBook Pro 17" (Snow Leopard) -- WD 2TB external drive MacBook Pro 13" (Snow Leopard) -- Seagate 1TB external drive I find that Time Machine sometimes doesn't back up new folders (and the files in them). This occurs both when I choose "Back Up Now" from the Time Machine icon in the Menu Bar and in TM's scheduled backups. These are not excluded folders (nor are then in the TM do-not-back-up list); they're perfectly normal folders (at various locations) inside my home folder. The only way to force them to be backed up is to restart the computer (unmounting & mounting the TM external disk does not help). There seems to be a correlation with new folders (i.e., it's more likely to happen that an entire new folder is not backed up), but this may just be observer bias (because those are the folders that I go check to see if they've been backed up). It's not computer dependent (it happens on two different computers). It's not external disk dependent (it happens on two different external disks). It's not time dependent (not restarting for several days does not fix the problem). What does a restart change that these other events don't? I'm considering deleting the /.fseventsd folder (without restarting the computer) to see if that helps. I haven't tried logging out and logging in (without restarting the computer).

  Read the article

• keyboard intermittently stops working even after reinstalling windows 7; possibly a Chrome issue?

  - by neverskipbreakfast

  My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash the ctrl+alt+windows keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) Unplugging & reconnecting keyboard does NOT fix it. Connecting a different keyboard does NOT fix it. That one won't work, either. Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears the keyboard won't work and neither will the icon to pull up the on-screen keyboard. My mouse can click around just fine. I can only log onto a non-password protected account. Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. Clearing my Chrome browsing data stopped the problem from recurring for a week or so. I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. I use Avira free antivirus software, and repeated scans turn up nothing fishy. I suspect it is related to something in Google Chrome because I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• I keep losing wireless connection

  - by posfan12

  I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

  Read the article

• Remote desktop solution where the desktop sharing party contacts the computer it wants to share with

  - by Kent

  I'm in a situation where I act as a sort of techinical support to my family and less techinically experienced friends. I'm looking for a remote desktop solution where it's possible to setup a "zero-install, double click an icon"-solution where the client computer contacts me so that I may interact with their desktop. The last part is important as the people in need of my help don't know how to configure their router or even the firewall software on their own computer. They are able to click an accept button when asked if a program should be able to make outgoing connections. They have many different kinds of routers, as well as software firewalls, and I rather not deal with the problem of how to connect to them using whatever as well as the actual problem they are having. It must be: Free of charge for non-commercial use. Possible to use it in a mode where the computer wanting to share its desktop should be able to make a connection to my computer. My computer has a DNS name we can use. Compatible with both Windows XP and Windows 7. Independent of a third party server or infrastructure. Explanations of the above: I don't want to spend money on it when I help them for free. If it's free as in freedom, all the better! I guess this boils down to being callable like showdesktopto.exe opscomputer.com where opscomputer.com is my computers DNS name. If that is possible then I can create a shortcut they can use to connect to me when they need help. It's nice if it's possible to specify a password or key file which I can use to authenticate myself, but it's not required. They use the OS which their machine comes installed with. That means Windows XP or 7. I want something which will work in the long run. Using a third party service which might not be available when I need it disqualified such solutions.

  Read the article

• Windows 7 libraries and folder redirection nightmare

  - by Lobuno

  Hello! In our active directory we deploy a policy to our clients where the personal directory (My documents) is redirected to a file server of ours \server\share\username\Documents In older systems everything worked fine. in Windows 7 some users are experimenting the following symptoms: The Documents library is EMPTY Where the documents library should be shown in Explorer an empty white icon is displayed. No caption. Right clicking in the Documents library to edit the folders that are part of the libraries brings the dialog up. However, that dialog is unusable. No folder is present there and clicking Add folder does nothing. Deleting the library and auto-creating it doesn't solve the problem The shared directory can be accessed via UNC paths and it can be mounted as a shared drive as well. The library is still broken. The shared drives are on a W2008 indexed server... Using the Windows Library tool utility doesn't solve the problem. What can the cause of this problem be and how can this be solved?

  Read the article

• Windows 7 libraries and folder redirection nightmare

  - by Lobuno

  Hello! In our active directory we deploy a policy to our clients where the personal directory (My documents) is redirected to a file server of ours \server\share\username\Documents In older systems everything worked fine. in Windows 7 some users are experimenting the following symptoms: The Documents library is EMPTY Where the documents library should be shown in Explorer an empty white icon is displayed. No caption. Right clicking in the Documents library to edit the folders that are part of the libraries brings the dialog up. However, that dialog is unusable. No folder is present there and clicking Add folder does nothing. Deleting the library and auto-creating it doesn't solve the problem The shared directory can be accessed via UNC paths and it can be mounted as a shared drive as well. The library is still broken. The shared drives are on a W2008 indexed server... Using the Windows Library tool utility doesn't solve the problem. What can the cause of this problem be and how can this be solved?

  Read the article

• Windows 7: Image thumbnails fail to appear

  - by Fopedush

  All right, I've got a pretty strange one here. Since I installed Windows 7 on this machine some time ago, image thumbnails have never worked properly. For the vast majority of images, they completely fail to show up, showing the icon of the default image viewing application instead. Please note that the “Always show icons, never thumbnails” option in folder options is not checked. I've taken a screenshot demonstrating the problem, here: Sometimes, a few image thumbnails will show up correctly, maybe about one in ten, with the rest failing as well. Another screenshot, with a handful of thumbnails visible, can be seen here: Windows explorer does not appear to make any effort to populate the missing thumbnails, and there is no appreciable CPU usage. I can leave a window with missing thumbnails open all night and they will still never appear. Newly created images never generate thumbnails, only images that have been on the system since day one will occasionally show them. This leads me to believe that explorer is set to show thumbnails, but whatever process is supposed to be in charge of actually generating them has failed somehow. In previous versions of windows, explorer.exe itself was responsible for thumbnail generation – has this changed? Any suggestions at all – even if you aren't sure that they will work – are welcome. I'd hate to have to wipe and reinstall on this machine for such a minor annoyance.

  Read the article

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by binary255

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• Do you need to advertise an AFP service via Avahi for an Ubuntu Server to show up in OSX Finder?

  - by James

  I am only advertising an NFS share plus the "model", and I don't want to install extra services on the Server unless I have to, ie netatalk, as it is used solely for NFS exports. Currently there is no entry in Finder under "Shared" with below config of Avahi. serveradmin@FILESERVER:/etc/avahi/services$ cat nfs.service <?xml version="1.0" standalone='no'?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">%h</name> <service> <type>_nfs._tcp</type> <port>2049</port> <txt-record>path=/Volumes/StoragePool</txt-record> </service> <service> <type>_device-info._tcp</type> <port>0</port> <txt-record>model=Xserve</txt-record> </service> </service-group> Server: Ubuntu 12.04.01 x64 Clients: OSX 10.6.8 , 10.7.5, 10.8.2 The goal is to advertise that NFS share, then assign a really old Model code of Mac like a Powermac and switch out the icon for a more "LinuxServer-y" one. Plus allow users to connect to NFS in a manner they are familiar with like our other Xserve servers. I think Avahi is working in general as if I do: nfs://FILESERVER.local/Volumes/StoragePool it will connect fine. Any ideas?

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by Deleted

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• Cleaning a proxy/phishing trojan from Windows XP computer

  - by i-g

  I am trying to remove an interesting trojan from a Windows XP computer. It manifests itself as a phishing page (screenshot linked) that appears after the user tries to log on to eBay. So far, I haven't found any other web sites that are affected. As you can see, the trojan intercepts browser connections (all installed browsers are affected) and injects this phishing page. The address looks like it's ebay.com, but HTTPS verification doesn't work (no lock icon or green bar in Firefox.) At some point, Trojan.Dropper appeared on the computer. I removed it with Malwarebytes Anti-Malware. Although it reappeared several times, it seemed to be gone after I booted into Safe Mode and did a full system scan with MBAM. Now, however, a different trojan has appeared on the machine; I suspect it was installed by Trojan.Dropper. So far, MBAM, Ad-Aware, and Spybot S&D have been unable to remove it. I've looked for it in the HijackThis log but haven't found anything conclusive. Has anyone run across a trojan like this before? Where would I start looking for it to remove it manually? Thank you for reading.

  Read the article

• Google Desktop Search problems - unable to disable indexing and no index status page

  - by Howiecamp

  I've been running Google Desktop (I've used both the regular and Enterprise versions) without issues on my Windows 7 64-bit PC for a long time with no issues. I just paved my PC and reinstalled Google Desktop (regular edition). Initially, I want to use it only for the CTRL-CTRL launcher capability - I don't want it to do any indexing. So I unchecked all the items in the configuration dialog as well as excluded c:. Despite this, it is indexing all the content on my hard drive as well as Outlook email, etc. In my previous installations I had the same options set and they worked properly. The other problem I have is that when you right-click on the Google Desktop system tray icon, there used to be an option for "Index Status" which showed you the percentage complete the index creation process was, as well as an option to clear and rebuild the index. Those are no longer there. I uninstalled the regular edition and installed the Enterprise Edition, but same problems. Any ideas?

  Read the article

• how to remove an entry from system tray?

  - by altvali

  I've searched for an answer to this one and I haven't found one yet. How do i remove a single item from Windows' System tray? I'm targeting Windows XP. Edit: This is not about preventing items from starting up. I want the program to keep running, I just need another script/program to remove the first one's entry from system tray. Second Edit: One approach that I can think of is to try to hide the intended app by modifying registry keys. On several test machines I've found some registry entries that match the System tray information at HKEY_USERS\something-that-looks-like S-1-5-21-682003330-1563985344-725345543-1003\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify with BalloonTip, IconStream and PastIconsStream containing systray information. The important one is IconStream. On other machines, these are found at hkey_classes_root/local/setting/software/microsoft/windows/currentversion/TrayNotify I'm quite sure there's no danger in changing those specific registries, but I don't know how to write code for that. Can anyone help me with the code and with confirming if this has the desired effect of hiding the systray icon for an active program?

  Read the article

• Setting up a minimalist linux environment

  - by Nate

  All right, I've been messing around with various linux distros and a variety of window managers (I seem to change operating systems like most people change their pants), and I've gotten to the point where I know what I want but I'm not sure the best way to set it up. Here's what I want out of my programming machine: I don't want a status bar. I don't want a menu bar. When there are no windows open, the screen should show my desktop background and nothing else. I'll use alt+f2 to run things, and my shell prompt will tell me my battery life and the time. I'll open network controls and volume controls when I need them, no need for them to pollute the screen all the time. I want a good, simple terminal emulator. I'll be using it with tmux. It should have no title bar and, if possible, no app frame. It's ok if I have to run it in full screen mode to remove the app frame, but only if it still plays nicely with alt-tab and workspaces. I want a dirt-simple window manager. It needs to support transparency: I don't have a lot of screen real-estate and I often overlay the terminal on the browser and type out commands. I don't want a tiling-only system, for the above reason. Bonus points for tiling and overlaying. I'd like multiple workspaces. I prefer to have one gui per workspace. If I could 'pin' the terminal emulator to always show up in each workspace, that's bonus points. If not, I can have a terminal emulator in each workspace attached to the same tmux instance. I'd like a way to set up a keypress that always takes me to the current open terminal emulator. Currently, 90% of the time I only have two windows open: the terminal emulator and something else. In this scenario, alt-tab works like a toggle between the two. If I have another gui open (like a developer window with a web browser), this throws a wrench in my workflow. I'd like a way to assign, for example, 'super-T' to switch to the first open terminal emulator. Bonus points if I can also assign 'super-B' (or whatever) to switch to the first open browser. So far I've been messing around with gnome and tweaking it heavily to match my preferences, but that seems like overkill and I can never get it quite right. I've toyed with xmonad, but it's more for handling many windows, and I usually only have the two. and am considering fluxbox, but I was wondering if any of your minimalists out there had suggestions that might better match my workflow. I'm sick of fighting the window manager, I just want it to get out of my way. Edit: To make things clear, I am not considering switching to a mac/windows environment. I find programming in windows to be a bore, and I have no interest in buying new (read: mac) hardware. Thanks! -Nate

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >