Search Results

Search found 9066 results on 363 pages for 'product'.

Page 192/363 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

  Read the article

• Oracle Data Integrator Demo Webcast - Next Webcast - November 21st, 2013

  - by Javier Puerta

  Oracle Data Integrator Demo Webcast Next Webcast - November 21st, 2013 The ODI Product Management team will be hosting a demonstration webcast of Oracle Data Integrator regularly. We will be showing baseline functionality, and covering special topics as requested by our customers. Attendance to these webcasts is open to customers and partners Webcast Format The same format for the Webcast will be followed for each presentation: 05 minutes - Background & Overview 30 minutes - Introduction to ODI Features 15 minutes - Drill-Down into Special Topics 10 minutes - Questions and Answers Next Webcast Special Topics Oracle Data Integrator 12c Webcast Details Thursday November 21st 2013, 10:00 AM PST | 1:00 PM EST | 6:00 PM CET (1 hour) Web Conference Link: 594 942 837 (https://oracleconferencing.webex.com) Dial-In Number: AMER: 1-866-682-4770 (More Numbers) Phone Meeting ID/Passcode: 3096713/505638 More information on Oracle Data Integrator (ODI) Learn more about Oracle Data Integrator. Download Oracle Data Integrator 12c. Oracle Data Integrator Webcast Archive Copyright © 2013, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

  Read the article

• How agile methodologies can be applied in a typical " services " company?

  - by AlfaTeK

  My company is a custom software services company for external clientes, which means our typical project is one in which the contract already states the full budget of the project. Our typical project starts by defining requirements (improving the proposal high-level requirements), then we code the project, test it and ship it. We have an acceptance phase were the client tests the software and in that phase we can usually implement small changes asked by the client, or we charge extra for change requests. In some projects we have intermediate releases so the clients can check the progress of the project and give feedback on it. In summary: something like waterfall... I've followed the "agile" movement for a bit now and I always see it being a good match for a "product" company, or a company building software for an internal client. But are there good stories / advantages on using agile methods in my kind of company/projects? What are your experiences, what do you think about this?

  Read the article

• High Availability documents for OBIA

  - by Lia Nowodworska - Oracle

  There are 2 white papers that have been created by Product Management and Advanced Resolution team (thanks Rajesh, Archana). These documents describe how to deploy a high-availability environment for the Weblogic components of BI Applications 11.1.1.8.1 and 11.1.1.7.1 including the Oracle Data Integrator. New  Configuring High Availability for Oracle Business Intelligence Applications Version 11.1.1.8.1 (Doc ID 1679319.1)  Updated Configuring High Availability for Oracle Business Intelligence Applications Version 11.1.1.7.1 (Doc ID 1587873.1)  When implementing OBIA please take some time to review one or both of the papers. Do you still have a quick question that you want an expert to have a look at: check in the OBIA Community:

  Read the article

• [News] Un plugin TFS pour Eclipse

  Suite au r?cent rachat de la soci?t? Teamprise en Novembre, Microsoft annonce la disponibilit? d'un plugin TFS pour Eclipse d?nomm? Visual Studio Team Explorer 2010 : " The beta release contains what we consider to be the essential features necessary to claim that we?re a client for TFS 2010. We?ve been trying to strike a balance between including 2010 features, and getting the product to market, so you won?t see everything here yet (...) " . Les copies d'?cran de ce plugin qui semble gratuit sont disponibles sur le blog en question.

  Read the article

• Hyperion Smart View Assistance

  - by p.anda

  (in via Akhter) Seeking more information or assistance with Hyperion Smart View?  The Oracle Technology Network (OTN) is a great first place to "stop-by".  Here the site provides access to the latest installer, general product documentation as well as Whitepapers, "Whats New" and "Oracle by Example" tutorials: OTN: Overview | Downloads | Documentation | Tutorials  For the latest documentation including Readme, New Features, User's Guide, Developer's Guide and Accessibility Guide visit: Oracle Hyperion Smart View for Office Documentation Release 11.1.2.5 Several "My Oracle Support" Knowledge (KM) Articles are available including: OBIEE 11.1.1.7 - New Features And Recommendations For Working With Microsoft Office [ Doc ID 1558070.1]- How to Integrate OBIEE with Microsoft Office Using Oracle Hyperion Smart View For Office [ Doc ID 1576336.1] - How To Create New Report From Scratch Within Excel Using Smart View [ Doc ID 1576596.1] These along with additional KM articles are being indexed in a Master Note - to keep up to-date with new articles bookmark this index page at: Master Note For Oracle Hyperion Smart View For Office Issues in OBIEE Doc ID 1589028.1

  Read the article

• Designing an API on top with Java RMI and Rest APIs

  - by user1303881

  I'm working on the backend of a java web application. We have a document repository (Fedora Commons specifically) where we house xml files. I want to abstract the API of the repository internally so that we aren't tightly coupled to one product. I'd also like to give the flexibility of connecting to to a repository via Java RMI or REST APIs. I was hoping to get advice or resources on how to implement something like this. My thought it that I'd have some abstract repository class that had methods like getRecord, updateRecord, and deleteRecord. In the constructor I would pass the URI for the repository and the API method and port. This would allow some flexibility in the future so that if the REST api became more practical, but allow the flexibility or using RMI which could (should?) have better performance. Am I over thinking this or am I on the right path?

  Read the article

• New convenient Information Center about OUD in My Oracle Support

  - by Sylvain Duloutre

  A new "Information Center" dedicated to Oracle Unified Directory is available from the Oracle Support Site. This page provides you with all the useful links and news related to the product, including technical articles, docs, licensing info and the latest patches available. To access it, log into MOS (My Oracle Support) at http://support.oracle.com,  search for 1418884.2 doc id in the search field on the front page, then click on the "Information Center : Overview Oracle Unified Directory (OUD)" link.

  Read the article

• Over a million COBOL porgrammers in the world?

  - by Lucas McCoy

  I think I heard on a previous StackOverflow podcast that COBOL was used as the programming language for traffic lights (or something like that), so this got me interested. I did a quick Google search and found this little article: Today, Cobol is everywhere, yet largely unheard of by millions of people who interact with it daily when using the ATM, stopping at traffic lights or buying a product online. The statistics on Cobol attest to its huge influence on the business world: There are over 220 billion lines of Cobol in existence, a figure which equates to about 80 per cent of the world’s actively used code. There over a million Cobol programmers in the world. There are 200 times as many Cobol transactions that take place each day than Google searches. I didn't really trust the source seeing as how it's on some random PHPBB forum. So how accurate are these figures? Are there really 220 billion lines of COBOL? I assume a few people/companies still use COBOL, but how many?

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

  - by vafa

  First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

  Read the article

• Good architecture for user information on separate databases?

  - by James P. Wright

  I need to write an API to connect to an existing SQL database. The API will be written in ASP.Net MVC3. The slight problem is that with existing users of the system, they may have a username on multiple databases. Each company using the product gets a brand new instance of the database, but over the years (the system has been running for 10 years) there are quite a few users (hundreds) who have multiple usernames across multiple "companies" (things got fragmented obviously and sometimes a single Company has 5 "projects" that each have their own database). Long story short, I need to be able to have a single unified user login that will allow existing users to access their information across all their projects. The only thing I can think is storing a bunch of connection strings, but that feels like a really bad idea. I'll have a new Database that will hold the "unified user" information...can anyone suggest a solid system architecture that can handle a setup like this?

  Read the article

• Is it common to prototype in a higher level language?

  - by Mark Canlas

  I'm currently toying with the idea of embarking on a project that far exceeds my current programming ability in a language I have very little real world experience in (C). Would it be valuable to prototype in a higher level language that I'm more familiar with (like Perl/Python/Ruby/C#) just so I can get the overall design going? Ultimately, the final product is performance sensitive, hence the choice of C, but I'm afraid not knowing C well will make me lose the forest for the trees. While searching for similar questions, I noticed one fellow mention that programmers used to prototype in Prolog, then crank it out in assembler.

  Read the article

• What is this chargeback scam from eBooks bought on my website?

  - by Dan Friedman

  We have a scammer that is buying our e-Books and then performing chargebacks. Our e-Books don't have DRM, so if they wanted to resell them, they would only need to buy each book once. But instead, they keep buying the same books over and over again and then performing hundreds of chargebacks. We have created some additional rules in our fraud protection tools to block certain aspects, even though all the info looks legit, and are hopeful this will slow them down. But my question is: What is the scam? If they aren't getting any product and they only get chargebacks for something they already purchased, then they can't get additional money from the credit card company, so then what's their motivation?

  Read the article

• Experience Oracle Database 12 c

  - by Breanne Cooley

  Written by Diana Gray, Principal Curriculum Product Manager, Oracle University Developing your skills with Oracle Database 12c may not be as hard as you think. Oracle’s expert curriculum developers designed curriculum offerings that can help you determine where you are and where you want to go. By looking at our Oracle Database 12c Solution page, you can quickly identify what you’ve taken in the past and what you still might require. Getting up to speed on this new technology is key to being able to access a platform that totally embraces the cloud. These new enhancements will make your job easier as you begin to understand how the new features work together. Get started with Oracle Database 12c by taking the newly released  Oracle Database 12c: New Features for Administrators Self-Study Course After you download the software, see which training and certifications are available. Add well-respected credentials of expertise to your portfolio of learning through Oracle University.

  Read the article

• How do you coordinate with interaction designers during implementation?

  - by Alex Feinman

  Programmers are largely responsible for helping move a product from design to implementation. This process is always full of snags: implementation details rear their ugly head and make parts of the design infeasible user feedback on early prototypes leads to changes in the design new technologies alter the field of what is possible, bringing back designs previously thought impossible priorities shift, schedules change, and requirements wander How do you keep design and implementation in contact during the implementation? What processes do you use? Tools? Artifacts? Guidelines? Communication strategies?

  Read the article

• SPARC Go To Market Webinar am 21. Juni

  - by A&C Redaktion

  Hiermit möchten wir Sie herzlich zum weltweiten SPARC Go To Market Webinar am 21. Juni, 17:00 Uhr CET einladen. Unser Sprecher, Bud Koch, Senior Principal Product Marketing Director, wird Ihnen in diesem Online-Event einen Überblick über das SPARC / T4 Marketing geben. Er stellt dabei die aktuelle Materialien vor und zeigt Ihnen, was im Fiskaljahr 2013 geplant ist. So bekommen Sie einen Einblick und die richtige Vertriebsunterstützung. Weitere Informationen zum Webinar finden Sie hier. Wir bitten Sie, sich schon ein paar Minuten vorher einzuwählen, damit das Webinar pünktlich beginnen kann. Sollten Sie nicht live dabei sein können, wird es im Anschluss eine Aufzeichnung geben, die wir hier im Blog teilen werden.

  Read the article

• Outside Operations in JD Edwards EnterpriseOne Manufacturing

  - by Amit Katariya

  Upcoming E1 Manufacturing webcasts   Date: March 30, 2010Time: 10:00 am MDTProduct Family: JD Edwards EnterpriseOne Manufacturing   Summary This one-hour session is recommended for functional users who would like to understand the Outside Operations process overview, including Setup, Execution and Troubleshooting.   Topics will include: Concept Setup in context of PDM, SFC, Product Costing, and Manufacturing Accounting Processing Troubleshooting   A short, live demonstration (only if applicable) and question and answer period will be included. Register for this session Oracle Advisor is dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Important links related to Webcasts Advisor Webcast Current Schedule Advisor Webcast Archived Recordings Above links requires valid access to My Oracle Support

  Read the article

• Link tracking: Amazon or Google way

  - by Howard

  When doing a shopping site, the best way is to reference some successful stores, like Amazon. In the area of link tracking, for example, to see which section of your frontpage yield better conversion: Amazon way: Generate an unique URL for each link in the frontpage, such as http://www.amazon.com/gp/product/B0083Q04IQ/ref=s9_pop_gw_g424_ir04/175-6575053-9292830?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0AMJCKBBQA63EP0XHB86&pf_rd_t=101&pf_rd_p=1263340922&pf_rd_i=507846 Google way Use Google Analytics <a href="/products/abc" onClick="javascript: pageTracker._trackPageview('/from-main-menu/products/abc');"> WHat are the pros and cons with the above two approaches (besides Google require JS support)?

  Read the article

• Download/submission directories are dead? Are they good for SEO?

  - by fborozan

  We have just released a new major software product version. In the past if you wanted visibility you would create a standardized pad file and you would submit it to hundreds of directories or you used web service that would do that for you. These directories would then serve as first incoming links to your web site. How about today? I think download directories are pretty much dead? Do you think this is still good SEO approach today? Are these software download directories useless?

  Read the article

• Compilable modern alternatives to C/C++

  - by Jeremy French

  I am considering writing a new software product. Performance will be critical, so I am wary of using an interpreted or language or one that uses a emulation layer (read java). Which leads me to thinking of using C (or C++) however these are both rather long in the tooth. I haven't used either for a long time. I figure in the last 20 years someone should have created something which is reasonably popular and is nice to code in and is complied. What more modern alternatives are there to C for writing high performance code compiled code? edit in response to comments If C++ is a different beast than it was 15 years ago, I would consider it, I guess I had an assumption that it had some inherent problems. Parallelisation would be important, but probably not across multiple machines.

  Read the article

• Browser based UI Customization with Oracle Identity Management 11gR2

  - by B Shashikumar

  Business users need user interfaces that are not only friendly but also easily customizable. However the downside of any customization project is the cost and complexity involved in developing, testing, deploying, and managing custom code. And equally critical is the challenge of ensuring customizations stay intact through product upgrades.To overcome these challenges, Oracle Identity Management 11gR2 now includes a Durable UI Configuration Framework which lets customers make complex UI customizations all from with the confines of a web browser. I recently sat down with Clayton Donley, Senior Director of Development for Oracle Identity and Access Management products. In this podcast, we examine how this new capability in Oracle Identity Management around browser based UI customization can reduce costs and complexity of customization while simplifying self service integration with corporate portal strategies. Click here to listen.

  Read the article

• What makes for the ideal project? [closed]

  - by Hans Westerbeek

  I try to be careful when accepting assignments, to avoid mutual disappointment. So, I started to come up with a list of things that I consider ingredients for The Ideal Project: (in no particular order) What did I miss? What did I get wrong? Team size < 6 persons to avoid having too many meetings Team members must be dedicated to the project Gut-feeling-estimate (made by developers) of running period does not exceed 4 months. Projects longer than that tend to become open-ended, and are therefore not projects. Has a Product Owner who has mandate and is well-respected at their own company and who has a real interest in the long-term success of the project. Has no technical involvement from people that are not on the team. (yes that's you, Mr Architect That Doesn't Code) All the usual about quiet working conditions Exciting subject matter. Content management is just not as cool as controlling robots :)

  Read the article

• Reduce HR Costs & Improve Productivity with Workforce Communications

  - by Robert Story

  Upcoming WebcastTitle: Reduce HR Costs & Improve Productivity with Workforce CommunicationsDate: May 18, 2010 Time: 12:00 pm EDT, 9:00 am PDT, 17:00 GMT Product Family: PeopleSoft HCM & EBS HRMSClick here to register for this session....... ....... ....... ....... ....... ....... .......The above webcast is a service of the E-Business Suite Communities in My Oracle Support.For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Google's process for publishing/modifying pages [closed]

  - by Glenn Dayton

  I'm assuming that a group of people at Google have control of certain sections of google.com, but how does Google make sure that employees don't accidentally or intentionally sabotage the website? Does Google use Adobe Contribute or some similar product for sharing/publishing the website. Do employees use WebDAV, FTP, SFTP, or SSH to publish the site. Since Google has hundreds of thousands of servers it probably takes some time for its servers to update. Do they transmit the new copy of the website to all servers before publishing at once? This question does not apply to Google editing a database and having a page reflect the database's changes. It applies to employees editing the source code and/ or back end of the site.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >