Search Results

Search found 5842 results on 234 pages for 'break'.

Page 193/234 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

  • How should I deal with floating numbers that numbers that can get so small that the become zero

    - by Tristan Havelick
    So I just fixed an interesting bug in the following code, but I'm not sure the approach I took it the best: p = 1 probabilities = [ ... ] # a (possibly) long list of numbers between 0 and 1 for wp in probabilities: if (wp > 0): p *= wp # Take the natural log, this crashes when 'probabilites' is long enough that p ends up # being zero try: result = math.log(p) Because the result doesn't need to be exact, I solved this by simply keeping the smallest non-zero value, and using that if p ever becomes 0. p = 1 probabilities = [ ... ] # a long list of numbers between 0 and 1 for wp in probabilities: if (wp > 0): old_p = p p *= wp if p == 0: # we've gotten so small, its just 0, so go back to the smallest # non-zero we had p = old_p break # Take the natural log, this crashes when 'probabilites' is long enough that p ends up # being zero try: result = math.log(p) This works, but it seems a bit kludgy to me. I don't do a ton of this kind of numerical programming, and I'm not sure if this is the kind of fix people use, or if there is something better I can go for.

    Read the article

  • How to "pin" C++/CLI pointers

    - by Kumar
    I am wrapping up a class which reading a custom binary data file and makes the data available to a .net/c# class However a couple of lines down the code, i start getting the memory access violation error which i believe is due to the GC moving memory around, the class is managed Here's the code if ( ! reader.OpenFile(...) ) return ; foreach(string fieldName in fields) { int colIndex = reader.GetColIndex( fieldName ); int colType = reader.GetColType( colIndex ); // error is raised here on 2nd iteration } for ( int r = 0 ; r < reader.NumFields(); r++ ) { foreach(string fieldName in fields) { int colIndex = reader.GetColIndex( fieldName ); int colType = reader.GetColType( colIndex ); // error is raised here on 2nd iteration switch ( colType ) { case 0 : // INT processField( r, fieldName, reader.GetInt(r,colIndex) ); break ; .... } } } .... i've looked at interior_ptr, pin_ptr but they give an error c3160 cannot be in a managed class Any workaround ? BTW, this is my 1st C++ program in a very long time !

    Read the article

  • Can knowing C actually hurt the code you write in higher level languages?

    - by Jurily
    The question seems settled, beaten to death even. Smart people have said smart things on the subject. To be a really good programmer, you need to know C. Or do you? I was enlightened twice this week. The first one made me realize that my assumptions don't go further than my knowledge behind them, and given the complexity of software running on my machine, that's almost non-existent. But what really drove it home was this Slashdot comment: The end result is that I notice the many naive ways in which traditional C "bare metal" programmers assume that higher level languages are implemented. They make bad "optimization" decisions in projects they influence, because they have no idea how a compiler works or how different a good runtime system may be from the naive macro-assembler model they understand. Then it hit me: C is just one more abstraction, like all others. Even the CPU itself is only an abstraction! I've just never seen it break, because I don't have the tools to measure it. I'm confused. Has my mind been mutilated beyond recovery, like Dijkstra said about BASIC? Am I living in a constant state of premature optimization? Is there hope for me, now that I realized I know nothing about anything? Is there anything to know, even? And why is it so fascinating, that everything I've written in the last five years might have been fundamentally wrong? To sum it up: is there any value in knowing more than the API docs tell me? EDIT: Made CW. Of course this also means now you must post examples of the interpreter/runtime optimizing better than we do :)

    Read the article

  • How to Store and Retrieve Images Using SQL Server (Server Management Studio)

    - by Joe Majewski
    I am having difficulties when trying to insert files into a SQL Server database. I'll try to break this down as best as I can: What data type should I be using to store image files (jpeg/png/gif/etc)? Right now my table is using the image data type, but I am curious if varbinary would be a better option. How would I go about inserting the image into the database? Does Microsoft SQL Server Management Studio have any built in functions that allow insertions of files into tables? If so, how is that done? Also, how could this be done through the use of an HTML form with PHP handling the input data and placing it into the table? How would I fetch the image from the table and display it on the page? I understand how to SELECT the cell's contents, but how would I go about translating that into a picture. Would I have to have a header(Content type: image/jpeg)? I have no problem doing any of these things with MySQL, but the SQL Server environment is still new to me, and I am working on a project for my job that requires the use of stored procedures to grab various data. Any and all help is appreciated.

    Read the article

  • Avoiding duplication in setting properties on the task in Rake tasks

    - by Stray
    I have a bunch of rake building tasks. They each have unique input / output properties, but the majority of the properties I set on the tasks are the same each time. Currently I'm doing that via simple repetition like this: task :buildThisModule => "bin/modules/thisModule.swf" mxmlc "bin/modules/thisModule.swf" do |t| t.input = "src/project/modules/ThisModule.as" t.prop1 = value1 t.prop2 = value2 ... (And many more property=value sets that are the same in each task) end task :buildThatModule => "bin/modules/thatModule.swf" mxmlc "bin/modules/thatModule.swf" do |t| t.input = "src/project/modules/ThatModule.as" t.prop1 = value1 t.prop2 = value2 ... (And many more property=value sets that are the same in each task) end In my usual programming headspace I'd expect to be able to break out the population of the recurring task properties to a re-usable function. Is there a rake analogy for this? Some way I can have a single function where the shared properties are set on any task? Something equivalent to: task :buildThisModule => "bin/modules/thisModule.swf" mxmlc "bin/modules/thisModule.swf" do |t| addCommonTaskParameters(t) t.input = "src/project/modules/ThisModule.as" end task :buildThatModule => "bin/modules/thatModule.swf" mxmlc "bin/modules/thatModule.swf" do |t| addCommonTaskParameters(t) t.input = "src/project/modules/ThatModule.as" end Thanks.

    Read the article

  • Suffix if statement

    - by Aardschok
    I was looking for a way to add a suffix to jointchain in Maya. The jointchain has specific naming so I create a list with the names they need to be. The first chain has "_1" as suffix, result: R_Clavicle_1|R_UpperArm_1|R_UnderArm_1|R_Wrist_1 When I create the second this is the result: R_Clavicle_2|R_UpperArm_1|R_UnderArm_1|R_Wrist_1 The code: DRClavPos = cmds.xform ('DRClavicle', q=True, ws=True, t=True) DRUpArmPos = cmds.xform ('DRUpperArm', q=True, ws=True, t=True) DRUnArmPos = cmds.xform ('DRUnderArm', q=True, ws=True, t=True) DRWristPos = cmds.xform ('DRWrist', q=True, ws=True, t=True), cmds.xform('DRWrist', q=True, os=True, ro=True) suffix = 1 jntsA = cmds.ls(type="joint", long=True) while True: jntname = ["R_Clavicle_"+str(suffix),"R_UpperArm_"+str(suffix),"R_UnderArm_"+str(suffix),"R_Wrist_"+str(suffix)] if jntname not in jntsA: cmds.select (d=True) cmds.joint ( p=(DRClavPos)) cmds.joint ( p=(DRUpArmPos)) cmds.joint ( 'joint1', e=True, zso=True, oj='xyz', radius=0.5, n=jntname[0]) cmds.joint ( p=(DRUnArmPos)) cmds.joint ( 'joint2', e=True, zso=True, oj='xyz', radius=0.5, n=jntname[1]) cmds.joint ( p=(DRWristPos[0])) cmds.joint ( 'joint3', e=True, zso=True, oj='xyz', radius=0.5, n=jntname[2]) cmds.rename ('joint4', jntname[3]) cmds.select ( cl=True) break else: suffix + 1 I tried adding +1 in jntname which resulted in a good second chain but the third chain had "_2" after R_Clavicle_3 The code, in my eyes should work. Can anybody point me in the correct direction :)

    Read the article

  • JSON Array Created in PHP/MySQL incorrectly decoded using JQuery

    - by Zak
    I am attempting to make an AJAX call to a very small PHP script that should return me an array that could be echo'd and decoded using JQuery. Here is what I have: My PHP page called to by AJAX: $web_q=mysql_query("select * from sec_u_g where uid='$id' "); $rs = array(); while($rs[] = mysql_fetch_assoc($web_q)) { } print_r(json_encode($rs)); This outputs: [{"id":"3","uid":"39","gid":"16"},{"id":"4","uid":"39","gid":"4"},{"id":"5","uid":"39","gid":"5"},{"id":"6","uid":"39","gid":"6"},{"id":"7","uid":"39","gid":"7"},{"id":"8","uid":"39","gid":"8"},{"id":"9","uid":"39","gid":"9"},false] I don't understand the "false" at the end for one .. But then I send to to JQuery and use: $.each(json.result, function(i, object) { $.each(object, function(property, value) { alert(property + "=" + value); }); }); This just fails. I try to alert "result" by itself which is set by: $.post("get_ug.php",{id:txt},function(result){ }); My output alerts are as follows: 1) The key is '0' and the value is '[' 2) The key is '1' and the value is 'f' 3) The key is '2' and the value is 'a' 4) The key is '3' and the value is 'l' 5) The key is '4' and the value is 's' 6) The key is '5' and the value is 'e' 7) The key is '6' and the value is ']' 8) The key is '7' and the value is ' ' (<-- Yes the line break is there in the alert) I am exhausted from trying different ideas and scripts. Other than setting a delimiter myself and concatenating my own array and decoding it with a custom script, does anyone have any ideas?? Thank you!!

    Read the article

  • Do you ever make a code change and just test rather than trying to fully understand the change you'v

    - by Clay Nichols
    I'm working in a 12 year old code base which I have been the only developer on. There are times that I'll make a a very small change based on an intuition (or quantum leap in logic ;-). Usually I try to deconstruct that change and make sure I read thoroughly the code. However sometimes, (more and more these days) I just test and make sure it had the effect I wanted. (I'm a pretty thorough tester and would test even if I read the code). This works for me and we have surprisingly (compared to most software I see) few bugs escape into the wild. But what I'm wondering is whether this is just the "art" side of coding. Yes, in an ideal world you would exhaustively read every bit of code that your change modified, but I in practice, if you're confident that it only affects a small section of code, is this a common practice? I can obviously see where this would be a disastrous approach in the hands of a poor programmer. But then, I've seen programmers who ostensibly are reading the code and break stuff left and right (in their own code based which only they have been working on).

    Read the article

  • how to fetch more than 1000 entities NON keybased?

    - by user291071
    If I should be approaching this problem through a different method, please suggest so. I am creating an item based collaborative filter. I populate the db with the LinkRating2 class and for each link there are more than a 1000 users that I need to call and collect their ratings to perform calculations which I then use to create another table. So I need to call more than 1000 entities for a given link. For instance lets say there are over a 1000 users rated 'link1' there will be over a 1000 instances of this class for the given link property that I need to call. How would I complete this example? class LinkRating2(db.Model): user = db.StringProperty() link = db.StringProperty() rating2 = db.FloatProperty() query =LinkRating2.all() link1 = 'link string name' a = query.filter('link = ', link1) aa = a.fetch(1000)##how would i get more than 1000 for a given link1 as shown? ##keybased over 1000 in other post example i need method for a subset though not key class MyModel(db.Expando): @classmethod def count_all(cls): """ Count *all* of the rows (without maxing out at 1000) """ count = 0 query = cls.all().order('__key__') while count % 1000 == 0: current_count = query.count() if current_count == 0: break count += current_count if current_count == 1000: last_key = query.fetch(1, 999)[0].key() query = query.filter('__key__ > ', last_key) return count

    Read the article

  • Question About Fk refrence in The Collection

    - by Ahmed
    Hi , i have 2 entities : ( person ) & (Address) with follwing mapping : <class name="Adress" table="Adress" lazy="false"> <id name="Id" column="Id"> <generator class="native" /> </id> <many-to-one name="Person" class="Person"> <column name="PersonId" /> </many-to-one> </class> <class name="Person" table="Person" lazy="false"> <id name="PersonId" column="PersonId"> <generator class="native" /> </id> <property name="Name" column="Name" type="String" not-null="true" /> <set name="Adresses" lazy="true" inverse="true" cascade="save-update"> <key> <column name="PersonId" /> </key> <one-to-many class="Adress" /> </set> </class> my propblem is that when i set Adrees.Person with new object of person ,The collection person.Adresses doesn't update itself . should i update every end role of the association to be updated in the two both? another thing : if i updated the Fk manually like this : Adress.PersonId it doesn't break or change association. does this is Nhibernte behavior ? thanks in advance , i am waiting for your experiencies

    Read the article

  • generic binary Search in c#

    - by Pro_Zeck
    Below is my Generic Binary Search it works ok with the intgers type array it finds all the elements in it . But the Problem Arises when i use a string array to find any string data. It runs ok for the first index and last index elements but i cant find the middle elements. Stringarray = new string[] { "b", "a", "ab", "abc", "c" }; public static void BinarySearch<T>(T[] array, T searchFor, Comparer<T> comparer) { int high, low, mid; high = array.Length - 1; low = 0; if (array[0].Equals(searchFor)) Console.WriteLine("Value {0} Found At Index {1}",array[0],0); else if (array[high].Equals(searchFor)) Console.WriteLine("Value {0} Found At Index {1}", array[high], high); else { while (low <= high) { mid = (high + low) / 2; if (comparer.Compare(array[mid], searchFor) == 0) { Console.WriteLine("Value {0} Found At Index {1}", array[mid], mid); break; } else { if (comparer.Compare(searchFor, array[mid]) > 0) high = mid + 1; else low = mid + 1; } } if (low > high) { Console.WriteLine("Value Not Found In the Collection"); } } }

    Read the article

  • Regarding Div Display

    - by user71723
    Hi to all, When i click on button,one div is showing..whenever i click on the body,that div will be hide. How can we achieve this functionality .. i write one code is as below. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script language="javascript"> function HideSubMenus(e) { var targ; if (!e) var e = window.event; if (e.target) targ = e.target; else if (e.srcElement) targ = e.srcElement; if (targ.nodeType == 3) // defeat Safari bug targ = targ.parentNode; for (var i=0; i!=5; i++) { if (!targ) { break; } else if (targ.className=="divclass") { return; } targ = targ.parentNode; } if(document.getElementById("showdivid")) { document.getElementById("showdivid").style.display=''; } } </script> </head> <body onclick="HideSubMenus(event);"> <input type="button" name="button" value="Click ME" onclick="document.getElementById('showdivid').style.display='';" /> <div id="showdivid" class="divclass" style="display:none;"> TeSt DIV </div> </body> </html> regards raj

    Read the article

  • What are the best practices for unit testing properties with code in the setter?

    - by nportelli
    I'm fairly new to unit testing and we are actually attempting to use it on a project. There is a property like this. public TimeSpan CountDown { get { return _countDown; } set { long fraction = value.Ticks % 10000000; value -= TimeSpan.FromTicks(fraction); if(fraction > 5000000) value += TimeSpan.FromSeconds(1); if(_countDown != value) { _countDown = value; NotifyChanged("CountDown"); } } } My test looks like this. [TestMethod] public void CountDownTest_GetSet_PropChangedShouldFire() { ManualRafflePresenter target = new ManualRafflePresenter(); bool fired = false; string name = null; target.PropertyChanged += new PropertyChangedEventHandler((o, a) => { fired = true; name = a.PropertyName; }); TimeSpan expected = new TimeSpan(0, 1, 25); TimeSpan actual; target.CountDown = expected; actual = target.CountDown; Assert.AreEqual(expected, actual); Assert.IsTrue(fired); Assert.AreEqual("CountDown", name); } The question is how do I test the code in the setter? Do I break it out into a method? If I do it would probably be private since no one else needs to use this. But they say not to test private methods. Do make a class if this is the only case? would two uses of this code make a class worthwhile? What is wrong with this code from a design standpoint. What is correct?

    Read the article

  • javascript error of unterminated string

    - by OM The Eternity
    I want pass a parameter of javascript functiona which is a string. This javascript function is a hintbox on mousehover.. and the string i am using is like this: Hemmed Finish: Every side/edge (1/2" to 2") of the banner are folded and glued (special vinyl solution) or heat pressed. This is the most common and best finish option. Stitched Finish: Every side/edge (1" to 2") of the banner are folded in the back and stitched/sewed with white thread. This is not a common option as thread can be seen on the banner. Now in the hintbox on mousehover the above given text has to be display as it is displayed above along with the paragraph break.. But when i pass the above as parameter in that function along with appending some backslashes to recognise some punctuation, iots till gives me javascript error of unterminated string... I am doing this: onMouseover="showhint('Hemmed Finish\: Every side/edge \(1/2\'\' to 2\'\'\) of the banner are folded and glued \(special vinyl solution\) or heat pressed. This is the most common and best finish option.Stitched Finish\: Every side/edge \(1\'\' to 2\'\'\) of the banner are folded in the back and stitched/sewed with white thread. This is not a common option as thread can be seen on the banner', this, event, '250px')" pls could u help me in rectifying the issue...

    Read the article

  • working with a csv with odd encapsulation // php

    - by Patrick
    I have a CSV file that im working with, and all the fields are comma separated. But some of the fields themselves, contain commas. In the raw csv file, the fields that contain commas, are encapsulated with quotes, as seen here; "Doctor Such and Such, Medical Center","555 Scruff McGruff, Suite 103, Chicago IL 60652",(555) 555-5555,,,,something else the code im using is below <?PHP $file_handle = fopen("file.csv", "r"); $i=0; while (!feof($file_handle) ) { $line = fgetcsv($file_handle, 1024); $c=0; foreach($line AS $key=>$value){ if($i != 0){ if($c == 0){ echo "[ROW $i][COL $c] - $value"; //First field in row, show row # }else{ echo "[COL $c] - $value"; // Remaining fields in row } } $c++; } echo "<br>"; // Line Break to next line $i++; } fclose($file_handle); ?> The problem is im getting the fields with the comma's split into two fields, which messes up the number of columns im supposed to have. Is there any way i could search for comma's within quotes and convert them, or another way to deal with this?

    Read the article

  • Undefined javascript function?

    - by user74283
    Working on a google maps project and stuck on what seems to be a minor issue. When i call displayMarkers function firebug returns: ReferenceError: displayMarkers is not defined [Break On This Error] displayMarkers(1); <script type="text/javascript"> function initialize() { var center = new google.maps.LatLng(25.7889689, -80.2264393); var map = new google.maps.Map(document.getElementById('map'), { zoom: 10, center: center, mapTypeId: google.maps.MapTypeId.ROADMAP }); //var data = [[25.924292, -80.124314], [26.140795, -80.3204049], [25.7662857, -80.194692]] var data = {"crs": {"type": "link", "properties": {"href": "http://spatialreference.org/ref/epsg/4326/", "type": "proj4"}}, "type": "FeatureCollection", "features": [{"geometry": {"type": "Point", "coordinates": [25.924292, -80.124314]}, "type": "Feature", "properties": {"industry": [2], "description": "hosp", "title": "shaytac hosp2"}, "id": 35}, {"geometry": {"type": "Point", "coordinates": [26.140795, -80.3204049]}, "type": "Feature", "properties": {"industry": [1, 2], "description": "retail", "title": "shaytac retail"}, "id": 48}, {"geometry": {"type": "Point", "coordinates": [25.7662857, -80.194692]}, "type": "Feature", "properties": {"industry": [2], "description": "hosp2", "title": "shaytac hosp3"}, "id": 36}]} var markers = []; for (var i = 0; i < data.features.length; i++) { var latLng = new google.maps.LatLng(data.features[i].geometry.coordinates[0], data.features[i].geometry.coordinates[1]); var marker = new google.maps.Marker({ position: latLng, title: console.log(data.features[i].properties.industry[0]), map: map }); marker.category = data.features[i].properties.industry[0]; marker.setVisible(true); markers.push(marker); } function displayMarkers(category) { var i; for (i = 0; i < markers.length; i++) { if (markers[i].category === category) { markers[i].setVisible(true); } else { markers[i].setVisible(false); } } } } google.maps.event.addDomListener(window, 'load', initialize); </script> <div id="map-container"> <div id="map"></div> </div> <input type="button" value="Retail" onclick="displayMarkers(1);">

    Read the article

  • Can I get a reference to an object created in a jQuery plugin?

    - by gargantaun
    Perhaps my brain is fried, but I'm writing a plugin that created an tweaks an element, but also creates an object that i'd like access to. So the plugin looks like this (function ($) { $.fn.myPlugin = function () { return this.each(function () { // do some stuff to the element... this.objectInstance = new usefulObject(); }); }; })(jQuery); function usefulObject(){ // useful object properties and methods.... this.doSomething = function(){ alert("Don't google Google. You'll break the internet."); } } so when I call the plugin, I also want to be able to get access to that usefulObject that I created. I thought something like this might work.... tweakedElement = $("#someDiv").myPlugin(); tweakedElement.objectInstance.doSomething(); ... but that's not working. How can I achieve this? Can I achieve this? Answers on a postcard, or down below, whichever suits you.

    Read the article

  • How lucene indexing ?

    - by user312140
    Hello I read some document about lucene ; also i read the document in this link ( http://lucene.sourceforge.net/talks/pisa ) . I don't really understand how lucene index documents and don't understand lucene work with which algorithm for indexing ? On above link , said lucene use this algorithm for indexing : * incremental algorithm: o maintain a stack of segment indices o create index for each incoming document o push new indexes onto the stack o let b=10 be the merge factor; M=8 for (size = 1; size < M; size *= b) { if (there are b indexes with size docs on top of the stack) { pop them off the stack; merge them into a single index; push the merged index onto the stack; } else { break; } } How this algorithm help us to have an optimize indexing ? Does lucene use B-tree algorithm or any other algorithm like that for indexing or have a paticular algorithm ? Thank you for reading my post .

    Read the article

  • iOS6: do we have to set rootViewController in App delegate in order to support different orientations?

    - by Centurion
    The app was perfectly fine working in iOS5 in landscape orientation. However in iOS6, it started to use portrait orientation in all view controllers. The methods shouldAutorotateToInterfaceOrientation are not called anymore. I read the new stuff about changed rotation mechanism in iOS6 and I was able to fix that by adding a line in my AppDelegate: self.window.rootViewController = _viewController _viewControler is the starting screen (Home-menu). All other view controllers implement shouldAutorotateToInterfaceOrientation method and returns YES for landscape orientations only. So, it's perfectly working solution for the app that needs to support only one orientation. However, the problem is I need one view controller (lets call it phone-VC) to be presented in portrait orientation. Now, if I want this view controller would be rotated then I need to return YES in Home-menu controller that is assigned to rootViewControler in appDelegate. However, I can't do that because this rootViewController is starting window that need to presented in landscape only, otherwise the layout with graphics in this window will break. But if I don't return YES from its shouldAutorotateToInterfaceOrientation (Home-menu) then the same method is not called in my view phone-VC that needs to be presented in portrait. Any ideas? Does the assignation of rootViewController is mandatory in AppDelegate? UPDATE: the problem exists on device (at least on iPhone4).

    Read the article

  • php code works with mamp but not on ubuntu server

    - by user355510
    Hello, I have start looking at a twitter php library http://github.com/abraham/twitteroauth, but i can't get it to work on my ubuntu server, but on my mac, with mamp it works without any problems. This is the code that don't won't to work on my server, but in mamp. Yes i have edit config file <?php /* Start session and load library. */ session_start(); require_once('twitteroauth/twitteroauth.php'); require_once('config.php'); /* Build TwitterOAuth object with client credentials. */ $connection = new TwitterOAuth(CONSUMER_KEY, CONSUMER_SECRET); /* Get temporary credentials. */ $request_token = $connection->getRequestToken(OAUTH_CALLBACK); /* Save temporary credentials to session. */ $_SESSION['oauth_token'] = $token = $request_token['oauth_token']; $_SESSION['oauth_token_secret'] = $request_token['oauth_token_secret']; /* If last connection failed don't display authorization link. */ switch ($connection->http_code) { case 200: /* Build authorize URL and redirect user to Twitter. */ $url = $connection->getAuthorizeURL($token); header('Location: ' . $url); break; default: /* Show notification if something went wrong. */ echo 'Could not connect to Twitter. Refresh the page or try again later.'; } I have enable php session on my ubuntu server, because this code works <?php session_start(); $_SESSION["secretword"] = "hello there"; $secretword = $_SESSION["secretword"] ; ?> <html> <head> <title>A PHP Session Example</title> </head> <body> <?php echo $secretword; ?> </body> </html>

    Read the article

  • C program - Seg fault, cause of

    - by resonant_fractal
    Running this gives me a seg fault (gcc filename.c -lm), when i enter 6 (int) as a value. Please help me get my head around this. The intended functionality has not yet been implemented, but I need to know why I'm headed into seg faults already. Thanks! #include<stdio.h> #include<math.h> int main (void) { int l = 5; int n, i, tmp, index; char * s[] = {"Sheldon", "Leonard", "Penny", "Raj", "Howard"}; scanf("%d", &n); //Solve Sigma(Ai*2^(i-1)) = (n - k)/l if (n/l <= 1) printf("%s\n", s[n-1]); else { tmp = n; for (i = 1;;) { tmp = tmp - (l * pow(2,i-1)); if (tmp <= 5) { // printf("Breaking\n"); break; } ++i; } printf("Last index = %d\n", i); // ***NOTE*** //Value lies in next array, therefore ++i; index = tmp + pow(2, n-1); printf("%d\n", index); } return 0; }

    Read the article

  • How can show data from another form

    - by Michael Quiles
    This is basically a tic tac toe game, and I have another form called Winner.cs when a player wins I want it to call the form (this part works) and then I want it to say xWinner.label =b1.text"" + has won the game!. the part I cant get to work is displaying the text in the winners form label. There's an example of a message box that commented out for reference instead of b1.text using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows.Forms; namespace MyGame { public class Result1 { static private int[,] Winners = new int[,] { {0,1,2}, {3,4,5}, {6,7,8}, {0,3,6}, {1,4,7}, {2,5,8}, {0,4,8}, {2,4,6}, }; static public bool CheckWinner(Button[] myControls) { bool gameOver = false; for (int i = 0; i < 8; i++) { int a = Winners[i, 0], b = Winners[i, 1], c = Winners[i, 2]; Button b1 = myControls[a], b2 = myControls[b], b3 = myControls[c]; if (b1.Text == "" || b2.Text == "" || b3.Text == "") continue; if (b1.Text == b2.Text && b2.Text == b3.Text) { b1.BackColor = b2.BackColor = b3.BackColor = System.Drawing.Color.LightCoral; b1.Font = b2.Font = b3.Font = new System.Drawing.Font("Microsoft Sans Serif", 32F, System.Drawing.FontStyle.Italic & System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0))); gameOver = true; Form xWinnerForm = new xWinnerForm(); xWinnerForm.Show(); //MessageBox.Show(b1.Text + " .... Wins the game!", "Game End", MessageBoxButtons.OK); //break; } } return gameOver; } } }

    Read the article

  • im counting the number of characters in a file but i want to count the number of words that are less

    - by user320950
    i want to do this: reads the words in the file one at a time. (Use a string to do this) Counts three things: how many single-character words are in the file, how many short (2 to 5 characters) words are in the file, and how many long (6 or more characters) words are in the file. HELP HERE im not sure on how about reading file into a string. i know i have to something like this but i dont understand the rest. HELP HERE ifstream infile; //char mystring[6]; //char mystring[20]; int main() { infile.open("file.txt"); if(infile.fail()) { cout << " Error " << endl; } int numb_char=0; char letter; while(!infile.eof()) { infile.get(letter); cout << letter; numb_char++; break; } cout << " the number of characters is :" << numb_char << endl; infile.close(); return 0;

    Read the article

  • Delphi - Clean TListBox Items

    - by Brad
    I want to clean a list box by checking it against two other list boxes. Listbox1 would have the big list of items Listbox2 would have words I want removed from listbox1 Listbox3 would have mandatory words that have to exist for it to remain in listbox1 Below is the code I've got so far for this, it's VERY slow with large lists. // not very efficient Function checknegative ( instring : String; ListBox : TListBox ) : Boolean; Var i : Integer; Begin For I := listbox.Items.Count - 1 Downto 0 Do Begin If ExistWordInString ( instring, listbox.Items.Strings [i], [soWholeWord, soDown] ) = True Then Begin result := True; //True if in list, False if not. break; End Else Begin result := False; End; End; result:=false; End; Function ExistWordInString ( aString, aSearchString : String; aSearchOptions : TStringSearchOptions ) : Boolean; Var Size : Integer; Begin Size := Length ( aString ); If SearchBuf ( Pchar ( aString ), Size, 0, 0, aSearchString, aSearchOptions ) <> Nil Then Begin result := True; End Else Begin result := False; End; End;

    Read the article

  • Are TestContext.Properties usable ?

    - by DBJDBJ
    Using Visual Studio generate Test Unit class. Then comment in, the class initialization method. Inside it add your property, using the testContext argument. Upon test app startup this method is indeed called by the testing infrastructure. //Use ClassInitialize to run code before running the first test in the class [ClassInitialize()] public static void MyClassInitialize(TestContext testContext) { /* * Any user defined testContext.Properties * added here will be erased after this method exits */ testContext.Properties.Add("key", 1 ) ; // place the break point here } After leaving MyClassInitialize, any properties added by user are lost. Only the 10 "official" ones are left. Actually TestContext gets overwritten, with the inital offical one, each time before each test method is called. It it not overwritten only if user has test initialization method, the changes made over there are passed to the test. //Use TestInitialize to run code before running each test [TestInitialize()]public void MyTestInitialize(){ this.TestContext.Properties.Add("this is preserved",1) ; } This effectively means TestContext.Properties is "mostly" read only, for users. Which is not clearly documented in MSDN. It seems to me this is very messy design+implementation. Why having TestContext.Properties as an collection, at all ? Users can do many other solutions to have class wide initialization. Please discuss. --DBJ

    Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >