Search Results

Search found 10878 results on 436 pages for 'changed'.

Page 193/436 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• UEFI Boot Failure - Hang after Printing USB Information

  - by James

  I'm experiencing a really weird boot problem. With both 12.10 and 12.04LTS, the vast majority of kernels (and initrds) that I've tried boot, but hang immediately after printing out information about USB devices. This isn't exactly a full "hang" so to speak, as if I plug in a flash drive, I see information and a /dev/sd* entry printed to the screen. Post/pre-init scripts are not run, there is no handoff, nor busybox or VT prompt. Virtual terminals can't be changed (with Ctrl-Alt-Fx). For what I can see, init may have not been executed yet. With certain kernel and OS combinations however, (specifically 3.2.0-29), I get a full boot and am able to use the OS as if there is no problem. After 3.2.0-29, I've been hard pressed to find a kernel that works. Any idea what's happening or how to fix this? Or even a road to take? I've exhausted the first five pages of Google for every search term I can think of. This is a Lenovo Z580 (i5-3210M) with Phoenix SecureCore Tiano firmware, if that helps any.

  Read the article

• Too much I/O in the morning ?

  - by steveh99999

  Interesting little improvement on a SQL 2005 system I encountered recently….. Some background - this system had a fairly ‘traditional OLTP’ workload ie  heavily used during day – till around 9pm, then had a batch window for several hours, then not much activity in the early hours of the day, until normal workload resumed the following morning. Using perfmon, I noticed that every morning, we would see a big spike in SQL Server I/O when the application started to be used... As it was 2005 I decided to look at what tables were in cache before and after the overnight batch processing ran… ( using DMV equivalent of dbcc memusage that I posted earlier). Here’s what I saw :-     So, contents of data cache split fairly evenly between my 'important/heavily used' tables.   After this:- some application batch processing,backups, DBCC checks and reindexes were run.  A fairly standard batch I'd suggest. Cache contents then looked like this :- Hmmmm – most of cache is now being used by a table I’ve described as ‘unimportant’. Why ? Well, that table was the last to be reindexed…. purely due to luck, as  the reindexing stored procedure performing a loop in alphabetical order through all application tables...  When the application starts to be used again – all this ‘unimportant’ data has to be replaced in cache by data that is heavily used… So, we changed the overnight reindex scripts –  the most heavily accessed tables are now the last to be reindexed. Obvious really, but we did see a significant reduction in early-morning I/O after changing the order of our reindexing.  

  Read the article

• Unhelpful Help

  - by Geoff N. Hiten

  Up until SQL 2012, I recommended installing Books On-Line (BOL) anywhere you installed SQL Server.  It made looking up reference information simpler, especially when you were on a server that didn’t have direct Internet access.  That all changed today.  I started the new Help Viewer with a local copy of BOL.  I actually found what I was looking for and closed the app.  Or so I thought.  Then I noticed something.  A little parasite had attached itself to my system.      Yep, the “Help” system left an “agent” behind.  Now I shouldn’t have to tell you that running application helper agents on server platforms is a bad idea.  And it gets worse.  There is no way to configure the app so that it does NOT start the parasite agent each time you restart help.  So the solution becomes do not install help on production server platforms.  Which is pretty unhelpful.

  Read the article

• Solutions for Project management [closed]

  - by user14416

  The team consists of 3 people. The method of development is Scrum. The language of the project is C++. The project will be under the control of the git system. The start up budget is 0. The following things have to be chosen: Build and Version Numbering Project documentation ( file with the most common info for current stage of the project, which will be changed every time the new version or subversion of the project emerges ) Project management tool ( like Trac or Redmine, I cannot use them, because there is no hosting ) Code documentation ( I consider Doxygen ) The following questions have arisen: What can you add to the above list of the main solutions for project management in the described project? One of three project participants has linux os (No MS Office), one has Windows and MS Office (does not want to use Libre or Open Office), one has Windows, but does not have MS Office. What formats, tools can u suggest using for project documentation? The variant of using online wiki does not fit, it must be files. OneNote mb is a good tool for project management, but because of the reason mentioned above it is not possible. What can you advise? Offer a system for Build and Version Numbering.

  Read the article

• Are there any "best practices" on cross-device development?

  - by vstrien

  Developing for smartphones in the way the industry is currently doing is relatively new. Of course, there has been enterprise-level mobile development for several decades. The platforms have changed, however. Think of: from stylus-input to touch-input (different screen res, different control layout etc.) new ways of handling multi-tasking on mobile platforms (e.g. WP7's "tombstoning") The way these platforms work aren't totally new (iPhone has been around for quite awhile now for example), but at the moment when developing a functionally equal application for both desktop and smartphone it comes down to developing two applications from ground up. Especially with the birth of Windows Phone with the .NET-platform on board and using Silverlight as UI-language, it's becoming appealing to promote the re-use of (parts of the UI). Still, it's fairly obvious that the needs of an application on a smartphone (or tablet) are very different compared to the needs of a desktop application. An (almost) one-on-one conversion will therefore be impossible. My question: are there "best practices", pitfalls etc. documented about developing "cross-device" applications (for example, developing an app for both the desktop and the smartphone/tablet)? I've been looking at weblogs, scientific papers and more for a week or so, but what I've found so far is only about "migratory interfaces".

  Read the article

• Bug fix for Eclipse runtime plugin

  - by Peter Benedikovic

  This blog is intended to inform about bug fix that solves this issue. Before continuing further, one important note – the linux and mac users do not need to read further because this bug appears only on Windows.  The problem was that the runtime plugin registered new runtime and server each time the Eclipse started. Users ended up with server view looking like this: I have created new runtime plugin which is now available at the update site http://download.java.net/glassfish/eclipse/indigo (or the same ending with juno for Juno users). You will still need to unistall the buggy plugin and (optionally but recommended) to remove runtimes created by this plugin. Here is the guide how to install bugfix: Uninstall buggy runtime plugin via menu Help->About Eclipse->Installation details. Remove runtimes created by old plugin – via Window->Preferences->Server->Runtime Environment. After pressing remove button you may be asked if you want to remove also the servers based on runtime being removed. Recommended is to do so. Now you can install new runtime plugin. Go to Help->Install New Software. You may ask why I haven‘t provided the update for buggy runtime which could be installed via Check for updates feature of Eclipse. It has two main reasons: The bug fix is needed only for Windows users so I didn't want to bother other users by updating working plugin. The runtime plugin has had structure that was not quite suitable for Eclipse update. This structure is now changed so future bugs (I am sure that there will be no such ;)) can be fixed by standard update. Have a good one!

  Read the article

• CodePlex Daily Summary for Wednesday, May 30, 2012

  CodePlex Daily Summary for Wednesday, May 30, 2012Popular ReleasesOMS.Ice - T4 Text Template Generator: OMS.Ice - T4 Text Template Generator v1.4.0.14110: Issue 601 - Template file name cannot contain characters that are not allowed in C#/VB identifiers Issue 625 - Last line will be ignored by the parser Issue 626 - Usage of environment variables and macrosSilverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.totalem: version 2012.05.30.1: Beta version added function for mass renaming files and foldersAudio Pitch & Shift: Audio Pitch and Shift 4.4.0: Tracklist added on main window Improved performances with tracklist Some other fixesJson.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DBScripterCmd - A command line tool to script database objects to seperate files: DBScripterCmd Source v1.0.2.zip: Add support for SQL Server 2005Indent Guides for Visual Studio: Indent Guides v12.1: Version History Changed in v12.1: Fixed crash when unable to start asynchronous analysis Fixed upgrade from v11 Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new setting...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...StarTrinity Face Recognition Library: Version 1.2: Much better accuracy????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitCommonLibrary.NET: CommonLibrary.NET 0.9.8 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Application: FluentScript Version: 0.9.8 Build: 0.9.8.4 Changeset: 75050 ( CommonLibrary.NET ) Release date: May 24, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...New Projects5Widgets: 5Widgets is a framework for building HTML5 canvas interfaces. Written in JavaScript, 5Widgets consists of a library of widgets and a controller that implements the MVC pattern. Though the HTML5 standard is gaining popularity, there is no framework like this at the moment. Yet, as a professional developer, I know many, including myself, would really find such a library useful. I have uploaded my initial code, which can definitely be improved since I have not had the time to work on it fu...Azure Trace Listener: Simple Trace Listener outputting trace data directly to Windows Azure Queue or Table Storage. Unlike the Windows Azure Diagnostics Listener (WAD), logging happens immediately and does not rely on (scheduled or manually triggered) Log Transfer mechanism. A simple Reader application shows how to read trace entries and can be used as is or as base for more advanced scenarios.CodeSample2012: Code Sample is a windows tool for saving pieces of codeEncryption: The goal of the Encryption project is to provide solid, high quality functionality that aims at taking the complexity out of using the System.Security.Cryptography namespace. The first pass of this library provides a very strong password encryption system. It uses variable length random salt bytes with secure SHA512 cryptographic hashing functions to allow you to provide a high level of security to the users. Entity Framework Code-First Automatic Database Migration: The Entity Framework Code-First Automatic Database Migration tool was designed to help developers easily update their database schema while preserving their data when they change their POCO objects. This is not meant to take the place of Code-First Migrations. This project is simply designed to ease the development burden of database changes. It grew out of the desire to not have to delete, recreated, and seed the database every time I made an object model change. Function Point Plugin: Function Point Tracability Mapper VSIX for Visual Studio 2010/TFS 2010+FunkOS: dcpu16 operating systemGit for WebMatrix: This is a WebMatrix Extension that allows users to access Git Source Control functions.Groupon Houses: the groupon site for housesLiquifier - Complete serialisation/deserialisation for complex object graphs: Liquifier is a serialisation/deserialisation library for preserving object graphs with references intact. Liquifier uses attributes and interfaces to allow the user to control how a type is serialised - the aim is to free the user from having to write code to serialise and deserialise objects, especially large or complex graphs in which this is a significant undertaking.MTACompCommEx032012: lak lak lakMVC Essentials: MVC Essentials is aimed to have all my learning in the projects that I have worked.MyWireProject: This project manages wireless networks.Peulot Heshbon - Hebrew: This program is for teaching young students math, until 6th grade. The program gives questions for the user. The user needs to answer the question. After 10 questions the user gets his mark. The marks are saved and can be viewed from every run. PlusOne: A .NET Extension and Utility Library: PlusOne is a library of extension and utility methods for C#.Project Support: This project is a simple project management solution. This will allow you to manage your clients, track bug reports, request additional features to projects that you are currently working on and much more. A client will be allowed to have multiple users, so that you can track who has made reports etc and provide them feedback. The solution is set-up so that if you require you can modify the styling to fit your companies needs with ease, you can even have multiple styles that can be set ...SharePoint 2010 Slide Menu Control: Navigation control for building SharePoint slide menuSIGO: 1 person following this project (follow) Projeto SiGO O Projeto SiGO (Sistema de Gerenciamento Odontologico) tem um Escorpo Complexo com varios programas e rotinas, compondo o modulo de SAC e CRM, Finanças, Estoque e outro itens. Coordenador Heitor F Neto : O Projeto SiGo desenvolvido aqui no CodePlex e open source, sera apenas um Prototipo, assim que desenvolmemos os modulos basicos iremos migrar para um servidor Pago e com segurança dos Codigo Fonte e Banco de Dados. Pessoa...STEM123: Windows Phone 7 application to help people find and create STEM Topic details.TIL: Text Injection and Templating Library: An advanced alternative to string.Format() that encapsulates templates in objects, uses named tokens, and lets you define extra serializing/processing steps before injecting input into the template (think, join an array, serialize an object, etc).UAH Exchange: Ukrainian hrivna currency exchangeuberBook: uberBook ist eine Kontakt-Verwaltung für´s Tray. Das Programm syncronisiert sämtliche Kontakte mit dem Internet und sucht automatisch nach Social-Network Profilen Ihrer KontakteWPF Animated GIF: A simple library to display animated GIF images in WPF, usable in XAML or in code.

  Read the article

• RAM caching causes severe performance drops

  - by B T

  I have read plenty of threads on memory caching and the standard response of "large cache is good, it shouldn't effect performance", "the kernel knows best". I have recently upgraded from 12.04 to 12.10 and changed from VirtualBox to VMware Workstation and the performance differences are severe (I suspect it is because of the latter). When I am running my virtual machine the system load monitor graph shows less than 50% memory usage generally. System load indicator is showing me that the rest of my RAM is used in the cache all the time. Plain and simple this is the comparison: BEFORE Cache was very sparingly used, pretty much none of my memory usage was the cache Swappiness was 0 (caused my memory to be used first, then swap only if needed) Performance was quite good and logical RAM was used fully first, caching was minimal. I could run enough software to utilize my full 4GB of RAM without any performance degradation whatsoever Swap space was then used as needed which was obviously slower (I am on a HDD) but was still usable when the current program was loaded into memory AFTER Cache is used to fill the full 4GB as soon as my virtual machine is run Swappiness is 0 (same behaviour as before but cache uses full memory straight away) Performance is terrible and unusable while running Ubuntu software Basic things like changing windows takes 2 minutes + Changing screens happens frame by frame over sometimes up to 5 minutes Cannot run an IDE and VM like I could with ease before So basically, any suggestions on how to take my performance back to how it was before while keeping my current setup? My suspicion is VMWare is the problem, but how do I see what is tied to the use of the cache? Surely there is a way to control this behaviour in software as polished as VMware? Thanks EDIT: Could also be important to note that the behaviour differs depending on whether VMware is open or closed. If VMware is open, then the ram will lock at like 50% and 50% cache and go into the complete lock up mentioned above. Contrastingly, if VMware is closed (after being open), then the RAM will continue to rise as it needs / cache will stay as the complete remaining memory and there is no noticeable performance degradation.

  Read the article

• How do I deploy a charm from a local repository?

  - by Matt McClean

  I am trying to run the Charm tutorial from the juju documentation by creating a new charm from a local repository. I started by installing the charms from bzr to my local ubuntu 12.04 desktop running in a virtual machine. The new file structure is the following: ubuntu@ubuntu-VirtualBox:~$ find charms/precise/drupal/ charms/precise/drupal/ charms/precise/drupal/hooks charms/precise/drupal/hooks/db-relation-changed charms/precise/drupal/hooks/install charms/precise/drupal/hooks/start charms/precise/drupal/hooks/stop charms/precise/drupal/metadata.yml charms/precise/drupal/README When I install the mysql charm, which was downloaded from the remote charm repository, it works fine. However when I run the following command to deploy the new charm it fails with the following error message: ubuntu@ubuntu-VirtualBox:~$ juju deploy --repository=charms local:precise/drupal 2012-05-09 10:01:05,671 INFO Searching for charm local:precise/drupal in local charm repository: /home/ubuntu/charms 2012-05-09 10:01:05,845 WARNING Charm '.mrconfig' has an error: CharmError() Error processing '/home/ubuntu/charms/precise/.mrconfig': unable to process /home/ubuntu/charms/precise/.mrconfig into a charm Charm 'local:precise/drupal' not found in repository /home/ubuntu/charms 2012-05-09 10:01:06,217 ERROR Charm 'local:precise/drupal' not found in repository /home/ubuntu/charms Is there some file missing in the drupal charm directory that juju needs to make the charm valid? Also, I get the file processing error for the .mrconfig file also when deploying the mysql charm so is there something I need to change there perhaps?

  Read the article

• Restart problem after installing graphical card driver

  - by Tim

  My laptop is Lenovo T400, running Ubuntu 10.10. My problem: I just run jockey-gtk and installed ATI/AMD proprietary FGLRX graphics driver. But after reboot, there is a short period of graphical "Ubuntu" and then instead of starting X-window it completely changed to command line to ask me to login. Even after login and then issuing xinit, it still failed to start X. To solve this problem: I followed this post, where one person suggested to you can simply write sudo apt-get remove fglrx This worked for me. If it doesn't work, then try sudo apt-get remove xorg-driver-fglrx and restart. I actually don't need the driver anyway, so I issued the first command after login under command line. But after reboot, the situation is even worse, and there is now even no command-line interface to ask me login, instead the screen is completely blank with just some ambient light in the background and Ubuntu is hanging there probably forever. So I have no chance to try the second command the person suggested. I was wondering what I can do now to solve my problem? Thanks and regards!

  Read the article

• Simplify Your Code with LINQ

  - by dwahlin

  I’m a big fan of LINQ and use it wherever I can to minimize code and make applications easier to maintain overall. I was going through a code file today refactoring it based on suggestions provided by Resharper and came across the following method: private List<string> FilterTokens(List<string> tokens) { var cleanedTokens = new List<string>(); for (int i = 0; i < tokens.Count; i++) { string token = tokens[i]; if (token != null) { cleanedTokens.Add(token); } } return cleanedTokens; }   In looking through the code I didn’t see anything wrong but Resharper was suggesting that I convert it to a LINQ expression: In thinking about it more the suggestion made complete sense because I simply wanted to add all non-null token values into a List<string> anyway. After following through with the Resharper suggestion the code changed to the following. Much, much cleaner and yet another example of why LINQ (and Resharper) rules: private List<string> FilterTokens(IEnumerable<string> tokens) { return tokens.Where(token => token != null).ToList(); }

  Read the article

• CodePlex Daily Summary for Friday, June 06, 2014

  CodePlex Daily Summary for Friday, June 06, 2014Popular ReleasesVirto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Load Runner - HTTP Pressure Test Tool: Load Runner 1.3: 1. gracefully stop distributed engine 2. added error handling for distributed load tasks if fail to send the tasks. 3. added easter egg ;-) NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...HigLabo: HigLabo_20140605: Modify AsciiCharOnly method implementation. Code clean up of RssItem.Description.51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...New ProjectsBack Up Your SharePoint: SPSBackUp is a PowerShell script tool to Backup your SharePoint environment. It's compatible with SharePoint 2010 & 2013.ChoMy: mrkidconsoledemo: a basic app about the knowledge in c# domainDecision Architect Server Client in C#: This project is a client for Decision Architect Server API.InnVIDEO365 Agile SharePoint-Kaltura App: InnVIDEO365 Agile SharePoint - Kaltura App for SharePoint Online is a complete video content solution for Microsoft SharePoint Online.JacOS: JacOS is an open-source operating system created with COSMOSKISS Workflow Foundation: This project was born from the idea that everyone should be able to use Workflow Foundation in best conditions. It contain sample to take WF jump start!Media Player (Technology Area): A now simple, yet somehow complex music, photo viewer I have some plans for the best tools for the player in the futureMetalurgicaInstitucional: MetalurgicaInstitucionalmoodlin8: Moodlin8 try to exploit significant parts of Moodle, the popular LMS, in a mobile or fixed environment based on the Modern Interface of Windows 8.1.NewsletterSystem: This is a test projectpesho2: Ala bala portokalaProyecto web Lab4 Gioia lucas: proyecto para lab4 utn pachecoRallyRacer: TSD Rally Compute helperVideo-JS Webpart for Sharepoint: Video-JS Webpart for SharepointYanZhiwei_CSharp_UtilHelp: ??C#???????????API: ????? Web API

  Read the article

• How do I restore a backup of my keyring (containing ssh key passprases, nautilus remote filesystem passwords and wifi passwords)?

  - by con-f-use

  I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happend). The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated.

  Read the article

• no way to use opendns on pppoe connection?

  - by magisterludi

  I have an old speedtouch usb modem (revision 0) and on my desktop with xubuntu 12.04 I've configured a pppoe connection. I can connect and my ISP assign an IP address and the DNS but the primary DNS address is not reachable by ping, the secondary yes but no address is resolved then I can't surf the web. Then I want to set the open DNS but there is bo way, if I change manually /etc/resolv.conf it is rewrited by some script (there is the flag usepeerdns on the configuration script, if I exclude it there is no way to assign any DNS server because resolv.conf is not read) also if I set not writable the file changing the default permission. I changed dhclient.conf with the code prepend domain-name-servers 208.67.222.222,208.67.220.220; and now if I connect by a wifi connection to my router I'm using openDNS server but ppp does not use this script as long as I can see and the DNS server is always setted by my ISP. How can I use set DNS manually to a PPP connection? Is there any way to change it after the connection? Why NetworkManager is not able to manage my dsl connection, it seems not able to manage the dsl usb cable modem. If I use pppoeconf NetworkManager doesn't start and I have to manually delete the lines added to /etc/network/interfaces because the system is not able to start with full configuration of network If I connect a modem-router to the same line I can surf with the DNS server assigned by my ISP, I can't figure why. Some suggestion? Thanks to all

  Read the article

• CodePlex Daily Summary for Wednesday, December 12, 2012

  CodePlex Daily Summary for Wednesday, December 12, 2012Popular ReleasesTorrents-List Organizer: Torrents-list organizer v 0.5.0.3: ????????? ? 0.5.0.3: 1) ?????????? ??????? ??? ?????????? ???-??????? ? ???????-??????. 2) ? ??????? ?????? ??????????? ?????????????? ????? ?????????? ?????????: ???? ?? ??????-???? ?????????? ?? ????????? ?? ????? ???????, ?? ? ????? ????? ????????? ????? ????????? ?? ????, ? ????????? ??? ???? ?????? ??????????.Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Simple Injector: Simple Injector v1.6.1: This patch release fixes a bug in the integration libraries that disallowed the application to start when .NET 4.5 was not installed on the machine (but only .NET 4.0). The following packages are affected: SimpleInjector.Integration.Web.dll SimpleInjector.Integration.Web.Mvc.dll SimpleInjector.Integration.Wcf.dll SimpleInjector.Extensions.LifetimeScoping.dllBootstrap Helpers: Version 1: First releasesheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.2.0: Main featuresOptimizations for intersectionsThe main purpose of this release was to further optimize rendering performance by skipping object intersections with other sheets. From now by default an object's sheets will only intersect its own sheets and never other static or dynamic sheets. This is the usual scenario since objects will never bump into other sheets when using collision detection. DocumentationMany of you have been asking for proper documentation, so here it goes. Check out the...MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.5.5 beta: Fix Bug: max_allowed_packet is modified to 1GB, but does not take effect in import & export process. This bug is fixed by re-initialize the MySqlConnection. Modified max_allowed_packet will only take effect on new connection, not on current connection.DirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesDirectXTex texture processing library: December 2012: December 11, 2012 Ex versions of CreateTexture, CreateShaderResourceView, DDSTextureLoader and WICTextureLoader Fixed BC2 and BC3 decompression issue for unusual color encoding case Converted annotation to SAL2 for improved VS 2012 /analyze experience Updated DirectXTex, DDSView, and Texconv with VS 2010 + Windows 8.0 SDK project using official 'property sheets'ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...Ad Rotator for Windows & Windows Phone: AdRotator v1.3 Silverlight: Note now also available via NuGet for both WP7 and WP8 v 1.3 Changelog: *Updated Ad Providers to Latest releases, inc: - Inneractive (new Nokia release) - Updated WP Smaato - MS Ad SDK Changed Caching strategy to always grab from network unless unavailable Pubcenter (Suspend/Resume) feature added Pubcenter "Active" fix option Cleaned up some threaded calls Other minor fixes For usage details check out the following tutorial blog post - http://bit.ly/S5CD4T *Note Included bin...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1211.1240 Fixed: changed to using the thumbnailPhoto attribute instead of jpegPhoto v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.New ProjectsBattle of Colors: Vacation project. Summary.blockme: This is a Blog using C#, ASP.Net MVC3 & RazorCoevery for Windows Phone: Coevery for Windows Phone is a free CRM Windows Phone application developed by Nova Software which is a .NET focused software development company.DNN Flash Viewer: Simple module for displaying flash content within a DNN pane.DonablRow Line Follower Simulator: This Application helps you to find the best Algorithm for your line follower robot.ExcelMerge: Merge microsoft excel file to a single.FCMGAAI: project ini merupakan implementasi algoritma fuzzy Cmeans dengan optimasi algoritma genetikaLIRC#: LIRC# is a simple client library to allow a .NET application to interact with an LIRC server to control or be controlled by IR devices.Managed Media Aggregation: Allowing developers to aggregate media from Rtsp sources over Rtsp without degrading the source bandwidth. Agnostic of Video or Audio format. Decodes Jpeg / RTPMarket Data Server: Local database server with quotes and trade-related data associated with equity, fixed-income, financial derivatives, currency, and other investment instrumentsproject13251212: papproject13271212: paPutovanje: Android aplikacija napisana za Mtel android ligu 2Questionario dinâmico: Questionario dinâmico para fins de estudos.Rasoulian: my RepoSharepoint Blog Archive Web Part: This Web Part is an alternative of the standart SharePoint Blog Site Archives Web Part. It's based on SharePoint 2010 Blog Site Archives Web Part by Bandar AlSimpleSocket for Windows Phone: SimpleSocket for Windows Phone is a super simple to use wrap around the built in socket framework that makes using socket connections incredibly easy and fast.

  Read the article

• Why doesn't lsof show localhost TCP connections in 14.04?

  - by sfussenegger

  I have two servers running 12.04.4 and 14.04.1 respectively. Both have nginx (port 80) and a Java process (port 8080). As expected, the lsof output for the Java process on the 12.04 machine shows a couple of established connections for port 8080 (e.g. TCP 127.0.0.1:8080->127.0.0.1:58067 (ESTABLISHED)) The 14.04 machine however does not. It only shows the listening port (TCP *:8080 (LISTEN)). I'm sure there are active connections though (confirmed by access logs, Java process status output, etc). What has changed from 12.04 to result in this behavior? Can this change be the cause for the "Too many open files" errors I'm getting since moving from 12.04 to 14.04? 12.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx ||/ Name Version +++-===========================================-=========================================== ii linux-image-virtual 3.2.0.59.70 ii lsof 4.81.dfsg.1-1build1 ii nginx 1.6.1-1~precise ii openjdk-7-jre 7u65-2.5.1-4ubuntu1~0.12.04.1 14.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx-full ||/ Name Version Architecture Description +++-=====================================-=======================-======================= ii linux-image-virtual 3.13.0.32.38 amd64 ii lsof 4.86+dfsg-1ubuntu2 amd64 ii nginx-full 1.4.6-1ubuntu3 amd64 ii openjdk-7-jre:amd64 7u65-2.5.1-4ubuntu1~0.1 amd64

  Read the article

• Google Webmaster tools Incorrect rel-alternate-hreflang implementation warning message

  - by Noam

  I'm getting this warning msg. in Google webmaster tools Incorrect rel-alternate-hreflang implementation In particular, there seems to be a problem with missing or incorrect bi-directional linking (when page A links with hreflang to page B, there must be a link back from B to A as well). This msg. seems pretty straight forward, but when checking their example pages, I'm not finding anything wrong. I'm using alternate for translation of main site menu, titles, etc.. In each page I have this: <link rel="alternate" hreflang="en" href="http://mydomain.com/page" /> <link rel="alternate" hreflang="jp" href="http://ja.mydomain.com/page" /> <link rel="alternate" hreflang="ko" href="http://ko.mydomain.com/page" /> <link rel="alternate" hreflang="th" href="http://th.mydomain.com/page" /> <link rel="alternate" hreflang="es" href="http://es.mydomain.com/page" /> <link rel="alternate" hreflang="pt" href="http://pt.mydomain.com/page" /> I've double checked this exists in all the 6 pages. This is the first time I've seen this msg although I've implemented this at least 6 months ago, and implementation hasn't changed. Is there any way to check a specific set of pages for these things? Am I missing something in my implementation? We're auto-redirecting people from a location to their specific language, and give them an option to manually change this. I've also just found out about the suggestion for Vary HTTP header - is that relevant and important here?

  Read the article

• Managing the Domino Effect (with Tutor Publisher Reports)

  - by [email protected]

  When an organization upgrades their business application or improves a process, it triggers changes that will reverberate throughout an organization, like a falling row of dominoes standing on end. A tangible and repeatable way to communicate change is with updated process documentation. But how do organizations get their arms around all the documents that are impacted by an application upgrade or process improvement? A small change in one place will trigger subsequent changes in other areas. A simple domino chain of questions can go like this. What screens have changed? Do the new screens change the process in place? In what procedural documents are the screens referenced? Who uses the screens and must be notified of the changes? What other documents are affected? Will the change affect current company policy? Tutor Publisher compiles focused, easy to read impact analysis reports of your process documentation library that answer these tough questions. Tutor reports make it easy to quickly target the information and documents that require updating. In turn, the updated documents are used to communicate the change. The Tutor writing methodology and Publisher reports provide organizations the means to confidently keep documentation in sync with the way the business runs. Start managing the domino effect in your organization. Get a grip on it here!

  Read the article

• How to get initial API right using TDD?

  - by Vytautas Mackonis

  This might be a rather silly question as I am at my first attempts at TDD. I loved the sense of confidence it brings and generally better structure of my code but when I started to apply it on something bigger than one-class toy examples, I ran into difficulties. Suppose, you are writing a library of sorts. You know what it has to do, you know a general way of how it is supposed to be implemented (architecture wise), but you keep "discovering" that you need to make changes to your public API as you code. Perhaps you need to transform this private method into strategy pattern (and now need to pass a mocked strategy in your tests), perhaps you misplaced a responsibility here and there and split an existing class. When you are improving upon existing code, TDD seems a really good fit, but when you are writing everything from scratch, the API you write tests for is a bit "blurry" unless you do a big design up front. What do you do when you already have 30 tests on the method that had its signature (and for that part, behavior) changed? That is a lot of tests to change once they add up.

  Read the article

• An unexpected pleasure from Windows 8

  - by eddraper

  This post is certainly on the more nuanced side of all the goodness that is Windows 8, but it’s about something that’s really changed my PC usage experience for the better. Besides being a geek and the enjoying all the techno-thrills and chills that go along with sitting in front of a keyboard all day, I really love the forest.  Trees have always been special to me.  The feeling of being in the forest with all the sounds and ambiance, the broken light, the fragrance of the air… it’s paradise to me. As I can’t get there often, due to work, and quite often the heat here in Texas, I’ve found something that can at least partially fill the gap…  When you install Windows 8, you’ll have an app called “Naturespace” from http://www.naturespace.com/ .  It boasts a number of predefined loops in what they call “holographic audio.”  They’re essentially high-tech 3D sound fields recorded in natural environments. After checking them out, I really liked the sound of the “Daybreak” selection: A great benefit is that you don’t have to be in Metro/Modern/Windows App Store mode, in order to keep the sound playing.  To start the day, I click on Daybreak, start it, then go back to the desktop and fire up VS, Chrome, etc. As I work and play, I’m surrounded by this delightful background ambiance which relaxes me and puts my mind at ease. Give it a try.  I think you’ll like it.  And no, you don’t need ear buds or headphones to get the benefit.

  Read the article

• What causes critical glib errors (when coding using messaging menu)?

  - by fluteflute

  If I run the python code below (almost entirely from this useful blog post) then I get three identical nasty looking error messages in the terminal. What might be causing them? I note the number (5857 in the example below) changes slightly on each run. What does this number signify? Is it a memory location or something similar? (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed I'm running this on Natty, I should probably find out if I get the same errors in 10.10 though... import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() gtk.main()

  Read the article

• How to spread XML Sitemaps over several webservers behind AWS loadbalancer?

  - by Jurik

  We have a web portal with almost a million products and way more other urls. I wrote a script that checks database. If there is a new url needed or an old one update, this script will update/create the XML Sitemaps. But we have several servers behind the load balancer at our rented AWS space. Further this script checks database for each url if there was an update so that it updates the appropriate xml file too. My question is how to spread those XML Sitemaps over all webservers behind this AWS load balancer? Our approaches/ideas: we could just generate them on one server with a cron job and copy them to the other servers, but this could be difficult because of automatic raising numbers of servers and so on. we put them on our S3 - but this one is not avaible thru our domain, so I guess google will have a problem with it I let my script run on every webserver but change it in a way that it will generate each time all xml files if they do not exist. But then I would have conflicts with updated URLs in my database, where I saved timestamp of last changed value of every url Is there another - better - solution that I do not know? Are there any special services by amazon for such cases?

  Read the article

• How do you cope with change in open source frameworks that you use for your projects?

  - by Amy

  It may be a personal quirk of mine, but I like keeping code in living projects up to date - including the libraries/frameworks that they use. Part of it is that I believe a web app is more secure if it is fully patched and up to date. Part of it is just a touch of obsessive compulsiveness on my part. Over the past seven months, we have done a major rewrite of our software. We dropped the Xaraya framework, which was slow and essentially dead as a product, and converted to Cake PHP. (We chose Cake because it gave us the chance to do a very rapid rewrite of our software, and enough of a performance boost over Xaraya to make it worth our while.) We implemented unit testing with SimpleTest, and followed all the file and database naming conventions, etc. Cake is now being updated to 2.0. And, there doesn't seem to be a viable migration path for an upgrade. The naming conventions for files have radically changed, and they dropped SimpleTest in favor of PHPUnit. This is pretty much going to force us to stay on the 1.3 branch because, unless there is some sort of conversion tool, it's not going to be possible to update Cake and then gradually improve our legacy code to reap the benefits of the new Cake framework. So, as usual, we are going to end up with an old framework in our Subversion repository and just patch it ourselves as needed. And this is what gets me every time. So many open source products don't make it easy enough to keep projects based on them up to date. When the devs start playing with a new shiny toy, a few critical patches will be done to older branches, but most of their focus is going to be on the new code base. How do you deal with radical changes in the open source projects that you use? And, if you are developing an open source product, do you keep upgrade paths in mind when you develop new versions?

  Read the article

• CodePlex Daily Summary for Sunday, October 13, 2013

  CodePlex Daily Summary for Sunday, October 13, 2013Popular ReleasesASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Coevery - Free ASP.NET CRM: Coevery_WebApp: it just for publish to microsoft web app gellaryTerrariViewer: TerrariViewer v7 [Terraria Inventory Editor]: This is a complete overhaul but has the same core style. I hope you enjoy it. This version is compatible with 1.2.0.3 Please send issues to my Twitter or https://github.com/TJChap2840WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.Free language translator and file converter: Free Language Translator 3.4: fixe for new version look up.MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...(Party) DJ Player: DJP.124.12: 124.12 (Feature implementation completed): Changed datatype of HistoryDateInfo from string to DateTime New: HistoryDateInfoConverter for the listbox Improved: HistoryDateInfoDeleter, HistoryDateInfoLoader, HistoryDateInfoAsynchronizer, HistoryItemLoader, HistoryItemsToHistoryDateInfoConverterSmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesGhostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionVidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 5819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Vodigi Open Source Interactive Digital Signage: Vodigi Release 6.0: Please note that we have removed the Kinect support in the Vodigi Player for Version 6.0. We are in the process of building a separate Kinect-enabled Player that will support the next generation Kinect sensor. If you are currently using Kinect with the Vodigi Player, you should not upgrade to Version 6.0. The following enhancements and fixes are included in Vodigi 6.0. Vodigi Administrator - New Interface - Timelines that allow you play video and images on the Main Screen Vodigi Player -...New ProjectsAspBlog: BlogCode for .NET: Collection of shared source libraries, components, scripts and other useful files to help with common Microsoft .NET development tasks.Code for Windows: Collection of shared source libraries, components, scripts and other useful files to help with common Microsoft Windows and Visual Studio development tasks.EDB to PST: Best and perfect solution for smart EDB to PST recovery. This software fastly repair EDB file and then convert EDB to PSTEditing EntityObject on WPF: This project consist on a simple xaml and a class. The xaml is used to create a Grid where the content will be displayed. All the items will be added in code-bFileManager using .net mvc4: .Net mvc4 app File upload and downloadI Componibili - Vol. 3 - Libro "Il linguaggio Visual Basic 2013": Gli esempi della guida "Linguaggio Visual Basic 2013"I Componibili - Vol. 4 - Libro "Visual Studio 2013 Ultimate": Gli esempi della guida "Linguaggio Visual Basic 2013"PDFKeeper: PDFKeeper is designed for the Small or Home Office to capture, store, index, and search PDF documents using the free Oracle Database Express Edition.Renshuu Font Replacer (unofficial): Chrome extension for http://www.renshuu.org that allows japanese fonts to be changed and randomized in quizzes, for the study of different styles of calligraphyScreenToGif: Screen recorder that saves the input to a gif.SEPA.Net a SEPA Parser for .Net: SEPA.Net is a parser for SEPA XML Messages based on ISO 2022. sugarweb: test projectTalkToPush: Don't push-to-talk, this program will do it for you. It listens to the microphone and presses a configured key when it hears you.vtms: it's a free project for small companyWiFiHotspot: ?????WiFi??????，????HTML，??C#

  Read the article

• How to Manage Technical Employees

  - by Ajarn Mark Caldwell

  In my current position as Software Engineering Manager I have been through a lot of ups and downs with staffing, ranging from laying-off everyone who was on my team as we went through the great economic downturn in 2007-2008, to numerous rounds of interviewing and hiring contractors, full-time employees, and converting some contractors to employee status.  I have not yet blogged much about my experiences, but I plan to do that more in the next few months.  But before I do that, let me point you to a great article that somebody else wrote on The Unspoken Truth About Managing Geeks that really hits the target.  If you are a non-technical person who manages technical employees, you definitely have to read that article.  And if you are a technical person who has been promoted into management, this article can really help you do your job and communicate up the line of command about your team.  When you move into management with all the new and different demands put on you, it is easy to forget how things work in the tech subculture, and to lose touch with your team.  This article will help you remember what’s going on behind the scenes and perhaps explain why people who used to get along great no longer are, or why things seem to have changed since your promotion. I have to give credit to Andy Leonard (blog | twitter) for helping me find that article.  I have been reading his series of ramble-rants on managing tech teams, and the above article is linked in the first rant in the series, entitled Goodwill, Negative and Positive.  I have read a handful of his entries in this series and so far I pretty much agree with everything he has said, so of course I would encourage you to read through that series, too.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >