Search Results

Search found 16218 results on 649 pages for 'compiler errors'.

Page 193/649 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• Many different BSOD

  - by Exa

  I'm experiencing multiple bluescreens for a couple of months now. Their error code is as diverse as their time of occurence... Sometimes it happens during gaming, sometimes when watching videos, sometimes when the computer is idle. These are the bluescreens I see most often: PAGE_FAULT_IN_NONPAGED_AREA KMODE_EXCEPTION_NOT_HANDLED IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION SYSTEM_THREAD_EXCEPTION INTERRUPT_EXCEPTION_NOT_HANDLED DRIVER_IRQL_NOT_LESS_OR_EQUAL DRIVER_OVERRAN_STACK_BUFFER Responsible drivers (according to the memory dumps): hal.dll tcpip.sys dxgmms1.sys ndis.sys mouhid.sys atikmdag.sys dump_atapi.sys and of course: ntoskrnl.exe My first thought was a driver incompatibility because I am using Windows 8 and some of the bluescreens seem to come from driver issues. All drivers are up to date. I'm afraid that my memory is broken or the mainboard or both. I used the windows integrated memtest which didn't find any errors. Memtest86 found some errors. Does it make sense to buy new memory? Couldn't it be a problem of the board as well? I also read that my memory could run at a too low voltage. But it's set to 1.5V as recommended. Another guess would be to set the memory's latencies manually, but how do I know which ones to try? Here is a screenshot of bluescreenview showing the latest bluescreens. Maybe someone has faced the same behavior before and found a solution. Any ideas or suggestions? Current setup on which the bluescreens occur. Windows 8 RTM (6.2.9200) Asrock 970 Extreme4 AMD FX-8150 ATI Radeon HD5850 16 GB RAM (DDR3-1800) Latest drivers for all devices

  Read the article

• Macports install of ack doesn't create correct executable

  - by user1664196

  I am trying to install p5-app-ack port from Mac Ports, but it seems it doesn't create a /opt/local/bin/ack binary at the end: $ sudo port search *app-ack Password: p5-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.8-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.10-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.12-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.14-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.16-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories Found 6 ports. $ perl --version This is perl 5, version 12, subversion 4 (v5.12.4) built for darwin-thread-multi-2level Copyright 1987-2010, Larry Wall Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. $ sudo port install p5-app-ack ---> Computing dependencies for p5-app-ack ---> Cleaning p5-app-ack ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 35.0% ---> No broken files found. $ $ ls /opt/local/bin/ac* /opt/local/bin/ack-5.12 /opt/local/bin/aclocal /opt/local/bin/aclocal-1.12 /opt/local/bin/activation-client /opt/local/bin/acyclic $ which ack $ ack -bash: ack: command not found Update If I then try to install p5.12-app-ack afterwards, I get $ sudo port install p5.12-app-ack Password: ---> Computing dependencies for p5.12-app-ack ---> Cleaning p5.12-app-ack ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. $

  Read the article

• Unable to ssh in Beagle Bone Black

  - by SamuraiT

  I wanted to install pip onto beagle bone black,and I tried this: /usr/bin/ntpdate -b -s -u pool.ntp.org opkg update && opkg install python-pip python-setuptools then, it threw errors,but Unfortunately, I didn't log that errors. it was occurred a week ago and was't solved yet. I wanted to solve it now and I tried connect by ssh,but I failed. When I ping to beagle bone, it responds, and Cloud9 IDE is working too but not ssh. I don't think this is serious problem since I can connect to beagle bone by other methods: Cloud9 or so. However, to use python on beagle bone, I need to connect by ssh. Before trying to update and install python-pip, I could connect by ssh. Do you have any ideas to solve this connection problem? note I use default OS: Angstrom I don't use SD card. HOST PC is mac, OS.X 10.9 connect by USB serial I checked this but this wasn't helpful http://stackoverflow.com/questions/19233516/cannot-connect-to-beagle-bone-black I could connect by GateOne SSH client, but still unable to connect from terminal.

  Read the article

• Xubuntu stuck after login

  - by viraptor

  How can I debug an issue with Xubuntu 12.04 (fresh install) which just waits idle after a login for about 30 seconds? The login screen is delayed correctly. After login, I get my desktop background, but no panels or auto-starting apps. It doesn't seem to be an authentication/pam issue, because I can login without delay at the console while the graphical session is still stuck. There's no disk or cpu activity and no obvious respawning of any process when I look at htop. There's nothing obviously wrong in .xsession-errors. Most interesting errors: openConnection: connect: No such file or directory cannot connect to brltty at :0 WARNING: gnome-keyring:: couldn't connect to: /tmp/keyring-wFn4VR/pkcs11: No such file or directory ... (polkit-gnome-authentication-agent-1:2131): polkit-gnome-1-WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The nam e org.gnome.SessionManager was not provided by any .service files ** Message: applet now removed from the notification area ** Message: using fallback from indicator to GtkStatusIcon ... (xfce4-indicator-plugin:2176): libindicator-WARNING **: IndicatorObject class does not have an accessible description. ... (xfce4-indicator-plugin:2176): Indicator-Application-WARNING **: Unable to get application list: Operation was cancelled Bootchart seems to end before I login, so it's not that helpful. Where else can I look for information?

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Setup ejabberd with SQL Server 2008

  - by wonster

  Here's what I have got so far. Windows 2008 Server 64 bit. Installed the latest version of ejabberd, ejabberd-2.1.8-windows-installer.exe. The windows service starts up fine but seems ineffective. However, using the start & stop scripts work. I am able to login to the admin page which so far doesn't seem that versatile. Opened up ports 5222, 5226 and 5280 for my workstation to talk to the server. I've got Spark and Jabbear Windows clients to register, login and instant message with multiple accounts using the server. After confirming that I've got the very basics working, I've decided to make use of SQL Server 2008 as the database. Reason? Mainly, I am very comfortable with SQL Server. I can deal with redundancy, failover, data analysis easily. Not sure if ejabberd's built in DB provides all that. Following the instructions from ejabberd's documentation, I setup a system DSN that points to another physical database. The DSN checks out fine. (Tried both Named Pipes and TCP/IP) Modified ejabberd.cfg. Commented line %%{auth_method, internal} and uncommented line {auth_method, odbc} Uncommented and modified {odbc_server, "DSN=ejabberd;UID=somelogin;PWD=somepassword"}. After making these changes, I restarted. No errors are found in the log files. The jabber clients are no longer able to register new accounts. I'm not sure where to look for errors besides the /logs/ folder as I'm new to all this. I am basically stuck here on step 5. Has anyone got this setup to work recently? Some of the posts I've found around are years old and of no help. I can't be the only one setting up ejabberd with MS SQL. Any help would be appreciated!

  Read the article

• MySQL stops accepting connections over 3306, still working on localhost

  - by Ben Dilts

  I have a MySQL database that stopped accepting connections from my web server altogether. So I SSH'ed into the server and started checking its vitals. The hard disks had plenty of open space, and there was plenty of available memory and swap space. Nothing was eating up the CPU (close to 100% idle). I even connected to MySQL locally and ran a few queries without any issues. But SHOW PROCESSLIST only showed my own connection, no others. Worst of all, in the MySQL log, no errors even remotely coincided with the unavailability of the server. On the web server, I got an error saying "Lost connection to MySQL server during query" at the moment the unavailability started, followed by a bunch of "MySQL server has gone away" errors. There's only one other application on the server that accepts network connections, and I killed that one (in case it was holding too many open connections or something), but it didn't help. Finally I just restarted the MySQL process, and everything is (for now) working again. What else should I check in these circumstances? Any idea what the problem might be? And how might I verify that is in fact the problem?

  Read the article

• 750Gig Hard Drive shows full with only 315Gigs used

  - by Chris Kelly

  I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

  Read the article

• How do I add a second disk to my zfs root pool

  - by ankimal

  I am trying to add a new disk to my zfs root pool. Here is my current config: zpool status pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c0d0s0 ONLINE 0 0 0 errors: No known data errors bash-3.00# df -h Filesystem Size Used Avail Use% Mounted on rpool/ROOT/s10x_u7wos_08 311G 18G 293G 6% / swap 14G 384K 14G 1% /etc/svc/volatile /usr/lib/libc/libc_hwcap1.so.1 311G 18G 293G 6% /lib/libc.so.1 swap 14G 52K 14G 1% /tmp swap 14G 40K 14G 1% /var/run rpool/export 293G 19K 293G 1% /export rpool/export/home 430G 138G 293G 32% /export/home rpool 293G 36K 293G 1% /rpool # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 63> /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0 1. c2d0 <Hitachi- JK1181YAHL0YK-0001-16777216.> /pci@0,0/pci-ide@1f,5/ide@1/cmdk@0,0 Disk 1 above is the new disk I need to attach to expand my root pool (give /export/home some extra space). If I try to attach my new disk to the pool # zpool attach -f rpool c0d0s0 c2d0s0 cannot attach c2d0s0 to c0d0s0: new device must be a single disk # uname -a SunOS dsol1 5.10 Generic_139556-08 i86pc i386 i86pc Solaris Any ideas?

  Read the article

• Cloning a failing disk (Win 7)

  - by daveh551

  I have a Windows 7 machine with several partitions on a 1.5T drive. Windows has been complaining about disk errors and imminent failure, so I have purchased a new 2TB drive. The failing disk has not completely failed, and, in fact, I was able to boot Windows from it (after a couple tries) and examine the SMART logs - the only RED item was 1 sector being reallocated. But when I try to Clone it to the new Drive using Acronis True Image Home (2010), True Image can see the drive, the partitions, and the contents, but when it goes to actually do the clone, it says "Failed to move. Make sure the destination disk is not smaller than the source disk, and that there are not errors on the disk" (or something like that). What are some other options for simply cloning the failing drive. I'd like to clone the entire disk, but am willing to do it partition by partition if necessary. Was this a known failing of the 2010 edition of ATI, or is it really something hosed in my system. Would upgrading to the 2012 edition be likely to work any better? (I'd download the trial and try it out, but if I remember right, the cloning operation is disabled in the trial version), and I don't have enough free disk space to make an entire image.) What are some other cloning software packages if ATI won't work? Note that I'm only looking to clone the disk, not make an image as a back up - I use Ghost for that, and can fall back to that if I have to. It looks to me like CloneZilla would do the job. Any recommendations? Thanks, and if this duplicates other questions, I apologize.

  Read the article

• windows 2008 r2 iis worker proccess memory usage increase

  - by nLL

  I have this web site written in c#. around 400-500 users online at any time. it was on windows 2008 32 bit machine before and never ever locked/slowed down due to increased memory consumption up until i upgraded it's server to win 2008 r2 64 bit. Old server had only 4 gig ram and quad core cpu at 2ghz. site was working just fine. since i've upgraded the server i noticed (2 times with in 10 days) it started to eat ram. last night it went up to 4 gb ram. with ram increase response slows down quite a lot. recycling app pool doesn't help. I have to restart it's worker process to recover. i've noticed this usually happens if there are continuous errors. as i didn't change anything in the code am i safe to assume it is not related to memory leak in the code? did anyone came across something like that? same thing happens if i create continuous errors with classic asp. thanks

  Read the article

• DBCC CHECKDB fails and quits job, ambiguous error message.

  - by ddono25

  I received a notice that one of our servers' DBCC CHECKDB for all databases has been failing the past four times it has been run. We don't have any data prior to that, but it doesn't look like it has been succeeding for awhile. There are no errors in the log file only: DBCC results for 'sys.sysxmlfacet'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 112 rows in 1 pages for object "sys.sysxmlfacet". [SQLSTATE 01000] I ran a DBCC CHECKDB using sp_MSForEachDB to get more accurate results and had the same error on the same DB but at a separate point: DBCC results for 'NameValuePair_Greek_CI_AS'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 0 rows in 0 pages for object "NameValuePair_Greek_CI_AS". [SQLSTATE 01000] Also, the error-log states that the DBCC completed without errors for this database. I can't figure out how to track down this ambiguous issue that only happens on this database out of the dozens on this server. Any help is appreciated!

  Read the article

• Server not resolving after restart

  - by DomainSoil

  I restarted our server today, and now cannot for the life of me get anything to resolve... I suspect it has something to do with our routes. I've tried numerous Google results to no avail. Here is as far as I've gotten: [root@www ~]# route -n Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth1 0.0.0.0 192.168.1.101 0.0.0.0 UG 0 0 0 eth1 Things you need to know: Our server (CentOS 6.3) runs two virtual machines, one live, and one development. They mirror each other as much as possible, but I can't find where I've went wrong with the live server. The dev server works fine. [root@www ~]# ifconfig eth1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet6 addr: xxxx:xxx:xxxx:xxxx:xxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118206 errors:0 dropped:0 overruns:0 frame:0 TX packets:165 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7825749 (7.4 Mib) TX bytes:7146 (69.2 KiB) Interrupt:28 [root@www ~]# /etc/init.d/network status Configured devices: lo Auto eth0 Currently active devices: lo eth1 If there is any other information you need, please don't hesitate to ask!

  Read the article

• Why is MySQL unable to open hosts.allow/hosts.deny?

  - by HonoredMule

  I have a storage server running Nexenta (OpenSolaris kernel, Ubuntu userspace) with MySQL on top of a ZFS storage array, using innodb_file_per_table and ulimit -n set to 8K. mysqltuner.pl confirms the file limit and claims there are 169 files. The following command: pfiles `fuser -c / 2>/dev/null indicates one mysqld process having 485 file/device descriptors (and they're almost all for files) so I don't know how reliable the tuning script is, but it is still way less than 8K and this list also finds no other process which is close to it's limit. The global total number of descriptors in use is around 1K. So what can cause mysqld to be constantly streaming the following errors? [date] [host] mysqld[pid]: warning: cannot open /etc/hosts.allow: Too many open files [date] [host] mysqld[pid]: warning: cannot open /etc/hosts.deny: Too many open files Everything appears to actually be operating fine, but the issue is constantly flooding the admin console and starts right away on a fresh boot (not only reproducible, but always from mysqld and always the hosts files, whose permissions are the default -rw-r--r-- 1 root root). I could, of course, suppress it from the admin console but I'd rather get to the bottom of it and still allow mysqld warnings/errors to reach the admin console. EDIT: not only is the actual file descriptor well within sane limits, the issue also persists (with immediate appearance) even with the file limit raised to 65535 and always only on hosts.allow/deny.

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• SMF restarting service whenever there's output?

  - by Phillip Oldham

  I'm trying to add a custom service to SMF's configuration, which seems successful in that the service starts and there is a log file, but therein lies the problem; the service, on start-up, prints some logging messages to the stderr. It seems that SMF is seeing those messages and, believing them to be errors, restarts the service, giving up after a number of tries and leaving the service off. Here's part of the log output: [ Mar 30 14:59:54 Enabled. ] [ Mar 30 14:59:54 Executing start method ("java server.CustomServer"). ] Starting server... [ Mar 30 15:00:04 Method or service exit timed out. Killing contract 107. ] Running the server directly on the commandline is fine, and AFACS there are no errors being encountered during startup, other than the output. What would be the best way to manage this service with SMF? The logging is needed for diagnosing problems, and would be problematic to disable. Is it possible to configure this service to only restart if the service exists?

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx.

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• How to fix UNMOUNTABLE_BOOT_VOLUME (0x000000ED) on my Windows XP DELL laptop?

  - by Neil

  I have a Dell Latitude D410. Running Windows XP. I am receiving the STOP: 0x000000ED (0X899CF030,0XC0000185,0X00000000,0X00000000) Blue screen. Initially, I tried everything specified with the Microsoft KB articles. At this time, I was able to boot into the general safemode. I pulled the hard drive and was able to run chkdsk on it- it noted that it had fixed some errors, but I was still unable to boot. I put a brand new hard drive in the laptop. Windows XP installation worked up until the reboot, at which time the exact same error message came back up. What I have tried (all since the new hard drive was installed): chkdsk /R All suggested solutions in Microsoft KB articles Reseating RAM Opened laptop, reseated all connectors, looked for signs of damage (saw none) Reset BIOS options to default Ran the basic Dell diagnostics I have looked at the current entry:How can I boot XP after receiving stop error 0x000000ED - I am currently in the process of downloading the Ultimate Boot CD to use as a test, but I am not holding out a lot of hope as I really doubt this brand new Hard Drive is bad. Can anyone think of other areas I am missing? Ran MEMTEST86+ V4.10 for 15 passes (overnight). 0 Errors EDIT: FORMATTING

  Read the article

• Clean installation of RHEL 5.5 claims package "desktops" is missing

  - by TKguru42

  Hi all, I'm a student worker in the CS department of my university, so please forgive me for any unprofessional descriptions. Simplified explanations are appreciated. I recently replaced some bad graphics cards in a few public workstations. The machines are all the same model. Before putting them back on the network I did fresh installs of RHEL---first I tried 5.4, but yum update ran into all sorts of ugly dependency errors and if I tried to remove any of the problematic packages, the whole operating system FUBAR'd. Using RHEL 5.5 gave me the same errors during install saying that "java.1.5.1-sun*" and "desktops" were missing, but yum update didn't have any dependency problems. Now that I tried logging in through the GUI, I encounter no GUI past the standard RHEL login page. The desktop is a uniform light teal and there's no system tray. An xclock window and an xterm window are open, and Firefox opens automatically, but that's it. Nothing else. What's REALLY confusing is that the computer claims that gnome is already installed, except it clearly isn't working. Any help or advice is greatly appreciated. If it helps, our department uses kickstart to run our standard Linux installs. I can try to get the script if that would be of use. Thank you!

  Read the article

• Windows 7 Laptop Randomly Sleeping

  - by Josh Arenberg

  I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

  Read the article

• What changed between Excel 2007 and 2010 that is causing my copied worksheet save to fail?

  - by snorehorse

  When I do this in Excel 2010 this fails, but works in Excel 2007: Create a new workbook and insert an image onto a worksheet, or get a preexisting worksheet with an image. Copy the worksheet into a new workbook by clicking the worksheet tab and clicking Move Or Copy and then choosing (new workbook) as the destination. Close the source workbook. Attempt to save the new workbook. The message is: "Errors were detected while saving 'myfilepathhere.xlsx'. Microsoft Excel may be able to save the file b removing or repairing some features. To make the repairs in a new file, click Continue. To cancel saving the file, click Cancel". Clicking continue brings up another file dialog window followed by more repair errors. It seems behind the scenes it is looking to the source workbook when it tries to save the image in the new destination workbook. No useful error message, of course, thanks microsoft. But this problem never happened in Excel 2007. The reason why I am closing the source notebook before the save, is because I don't need the end user to see it after I programmatically pull a coversheet (with the image) from it, in an interop app. Thanks for any help. Update: I don't encounter this problem if I open the source workbook as "Read Only" (I do this programmatically using Excel Interop).

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• processing of Group Policy failed only on 2008 Servers and Name Resolution failure on the current domain controller

  - by Ken Wolfrom

  Spent last 3 months doing a upgrade from 2003 domain to a 2008R2 domain. our last DC was rebuilt (5 total) and brought up on line. After it was put on line we have some 2008 and 2008R2 servers (10 now) getting these errors in the event logs. ERRORS Description: The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).\ Can duplicate this if we drop to command prompt and run GPUPDATE manually When our users attempt to do a \directory\shared access to shared drive on an affected server get this error.– “THERE ARE CURRETLY NO LOGON SERVER AVAIALBE TO SERICE THE LOGON REQUEST. This is only affecting the 2008 OS and it is a random set of abotu 10 servers out of some 30 with this OS. The Services on the machines are running Ok and login. Able to log in with domain/user to the consoles and via RDP. WE can log onto an affected machine, and can get to the \domainname\sysvol and can see the GPO's Have checked the replication topology of the domain and it states all servers can replicate with no errrors. We went back to the last DC, demoted it, removed DNS and then removed it from the domain and waited 24 hours and issue still persist. Picked one server, removed it from domain, reboooted, and added back to domain with no problems, but still has this behavior. bottom line is we have some servers that the domain will not let any UDP/client server apps or GPO's process ,but the tcp related items seeme to work fine, http, tcp calls, sql and oracle dbs's connect and process. Any inputs on some possible reasons for this issue and fixes. It is only affecting the 2008 servers on a 2008R2 domain.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >