Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 193/1213 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Integrated webcam in lenovo t410 not working with 12.04

  - by kristianp

  I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

  Read the article

• Can't return to stock Android

  - by kurt

  Whenever I try and uncompress the tar file, I get this: tar (child): nakasi-jro03d-factory-e102ba72.tg: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now I'm fairly new to Ubuntu. So I'm pretty sure that's my fault. So I just compress it manually using the GUI. But when I try to flash it, I get sudo: ./flash-all.sh: command not found Please help.

  Read the article

• Unable to boot Ubuntu 13.10 (nVidia GTX 770m and Intel HD 4600)

  - by Raziel Gonzalez

  Ever since I bought this laptop I've been trying to install Ubuntu on it. It came with W8 preinstalled. Up to this point, I've been able to boot in UEFI mode with a black screen. I can tell it's trying to use the nVidia card (there's a led on the computer, depending on the color you can tell which GPU is using) and if I press crtl+alt+F1 I can go to console mode. Taking this advantage I tried to install bumblebee and after a successful install the led that indicates which GPU is being used change, indicating that it switched to the Intel HD 4600 graphics. After the installation I tried to initiate the graphic interface (startx) with no success. Xorg.0.log shows the error: [ 3706.779] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 3706.782] X Protocol Version 11, Revision 0 [ 3706.783] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu [ 3706.783] Current Operating System: Linux ubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 [ 3706.783] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset -- [ 3706.785] Build Date: 15 October 2013 09:23:37AM [ 3706.786] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 3706.786] Current version of pixman: 0.30.2 [ 3706.788] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3706.788] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3706.791] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 2 12:28:52 2013 [ 3706.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 3706.792] (==) No Layout section. Using the first Screen section. [ 3706.792] (==) No screen section available. Using defaults. [ 3706.792] (**) |-->Screen "Default Screen Section" (0) [ 3706.792] (**) | |-->Monitor "<default monitor>" [ 3706.792] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 3706.792] (==) Automatically adding devices [ 3706.792] (==) Automatically enabling devices [ 3706.792] (==) Automatically adding GPU devices [ 3706.792] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 3706.792] Entry deleted from font path. [ 3706.792] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 3706.792] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 3706.792] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 3706.792] (II) Loader magic: 0x7ff680918d20 [ 3706.792] (II) Module ABI versions: [ 3706.792] X.Org ANSI C Emulation: 0.4 [ 3706.792] X.Org Video Driver: 14.1 [ 3706.792] X.Org XInput driver : 19.1 [ 3706.792] X.Org Server Extension : 7.0 [ 3706.793] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e8 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64 [ 3706.793] (II) Open ACPI successful (/var/run/acpid.socket) [ 3706.794] Initializing built-in extension Generic Event Extension [ 3706.795] Initializing built-in extension SHAPE [ 3706.796] Initializing built-in extension MIT-SHM [ 3706.797] Initializing built-in extension XInputExtension [ 3706.797] Initializing built-in extension XTEST [ 3706.798] Initializing built-in extension BIG-REQUESTS [ 3706.799] Initializing built-in extension SYNC [ 3706.799] Initializing built-in extension XKEYBOARD [ 3706.800] Initializing built-in extension XC-MISC [ 3706.801] Initializing built-in extension SECURITY [ 3706.802] Initializing built-in extension XINERAMA [ 3706.802] Initializing built-in extension XFIXES [ 3706.803] Initializing built-in extension RENDER [ 3706.804] Initializing built-in extension RANDR [ 3706.804] Initializing built-in extension COMPOSITE [ 3706.805] Initializing built-in extension DAMAGE [ 3706.806] Initializing built-in extension MIT-SCREEN-SAVER [ 3706.806] Initializing built-in extension DOUBLE-BUFFER [ 3706.807] Initializing built-in extension RECORD [ 3706.807] Initializing built-in extension DPMS [ 3706.808] Initializing built-in extension X-Resource [ 3706.809] Initializing built-in extension XVideo [ 3706.809] Initializing built-in extension XVideo-MotionCompensation [ 3706.810] Initializing built-in extension SELinux [ 3706.811] Initializing built-in extension XFree86-VidModeExtension [ 3706.811] Initializing built-in extension XFree86-DGA [ 3706.812] Initializing built-in extension XFree86-DRI [ 3706.812] Initializing built-in extension DRI2 [ 3706.812] (II) "glx" will be loaded by default. [ 3706.812] (WW) "xmir" is not to be loaded by default. Skipping. [ 3706.812] (II) LoadModule: "dri2" [ 3706.812] (II) Module "dri2" already built-in [ 3706.812] (II) LoadModule: "glamoregl" [ 3706.813] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 3706.813] (II) Module glamoregl: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.2.901, module version = 0.5.1 [ 3706.813] ABI class: X.Org ANSI C Emulation, version 0.4 [ 3706.813] (II) LoadModule: "glx" [ 3706.813] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 3706.813] (II) Module glx: vendor="X.Org Foundation" [ 3706.813] compiled for 1.14.3, module version = 1.0.0 [ 3706.813] ABI class: X.Org Server Extension, version 7.0 [ 3706.813] (==) AIGLX enabled [ 3706.814] Loading extension GLX [ 3706.814] (==) Matched intel as autoconfigured driver 0 [ 3706.814] (==) Matched vesa as autoconfigured driver 1 [ 3706.814] (==) Matched modesetting as autoconfigured driver 2 [ 3706.814] (==) Matched fbdev as autoconfigured driver 3 [ 3706.814] (==) Assigned the driver to the xf86ConfigLayout [ 3706.814] (II) LoadModule: "intel" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 3706.814] (II) Module intel: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.3, module version = 2.99.904 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "vesa" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 3706.814] (II) Module vesa: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 2.3.2 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "modesetting" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 3706.814] (II) Module modesetting: vendor="X.Org Foundation" [ 3706.814] compiled for 1.14.1, module version = 0.8.0 [ 3706.814] Module class: X.Org Video Driver [ 3706.814] ABI class: X.Org Video Driver, version 14.1 [ 3706.814] (II) LoadModule: "fbdev" [ 3706.814] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 3706.815] (II) Module fbdev: vendor="X.Org Foundation" [ 3706.815] compiled for 1.14.1, module version = 0.4.3 [ 3706.815] Module class: X.Org Video Driver [ 3706.815] ABI class: X.Org Video Driver, version 14.1 [ 3706.815] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 3706.815] (II) VESA: driver for VESA chipsets: vesa [ 3706.815] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 3706.815] (II) FBDEV: driver for framebuffer: fbdev [ 3706.815] (--) using VT number 7 [ 3706.819] (WW) Falling back to old probe method for modesetting [ 3706.819] (EE) open /dev/dri/card0: No such file or directory [ 3706.819] (WW) Falling back to old probe method for fbdev [ 3706.819] (II) Loading sub module "fbdevhw" [ 3706.819] (II) LoadModule: "fbdevhw" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 3706.819] (II) Module fbdevhw: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 0.0.2 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "vbe" [ 3706.819] (II) LoadModule: "vbe" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 3706.819] (II) Module vbe: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.1.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) Loading sub module "int10" [ 3706.819] (II) LoadModule: "int10" [ 3706.819] (II) Loading /usr/lib/xorg/modules/libint10.so [ 3706.819] (II) Module int10: vendor="X.Org Foundation" [ 3706.819] compiled for 1.14.3, module version = 1.0.0 [ 3706.819] ABI class: X.Org Video Driver, version 14.1 [ 3706.819] (II) VESA(0): initializing int10 [ 3706.820] (EE) VESA(0): V_BIOS address 0x0 out of range [ 3706.820] (II) UnloadModule: "vesa" [ 3706.820] (II) UnloadSubModule: "int10" [ 3706.820] (II) Unloading int10 [ 3706.820] (II) UnloadSubModule: "vbe" [ 3706.820] (II) Unloading vbe [ 3706.820] (EE) Screen(s) found, but none have a usable configuration. [ 3706.820] (EE) Fatal server error: [ 3706.820] (EE) no screens found(EE) [ 3706.820] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 3706.820] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 3706.820] (EE) [ 3706.827] (EE) Server terminated with error (1). Closing log file. I also saved the dsmeg output to see if it can be of any help. In order to be able to get to this stage I had to boot with nomodeset option and removed quiet and splash. Anyone got this same error? Any guidance? I've tried other linux distros and so far the only one that is able to boot is Opensuse 12.3 without any issues (but only when I switch to legacy mode instead of UEFI).

  Read the article

• Pythonika installation error on ubuntu 12

  - by user1426913

  I have been following links: to install pythonika on ubuntu: How to install Pythonika on Ubuntu? I get error: $ sudo make -f Makefile.linux cc -c Pythonika.c -I/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions -I/usr/include/python2.7/ Pythonika.c: In function ‘PyUnicodeString’: Pythonika.c:109:5: warning: passing argument 1 of ‘PyUnicodeUCS4_FromUnicode’ from incompatible pointer type [enabled by default] /usr/include/python2.7/unicodeobject.h:464:23: note: expected ‘const Py_UNICODE *’ but argument is of type ‘short unsigned int *’ Pythonika.c: In function ‘python_to_mathematica_object’: Pythonika.c:411:13: warning: passing argument 2 of ‘MLPutUnicodeString’ from incompatible pointer type [enabled by default] /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mathlink.h:4299:1: note: expected ‘const short unsigned int *’ but argument is of type ‘Py_UNICODE ’ "/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep" Pythonika.tm -o Pythonikatm.c /bin/sh: 1: /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep: not found make: ** [Pythonikatm.o] Error 127

  Read the article

• Disable Facebook plug-in on default Firefox

  - by nvcnvn

  This may a Firefox question rather than Ubuntu but since the plug-in seem to be integrated with the Ubuntu status bar so I think I should try my luck here. Just update to Firefox 17 and not sure why now when I go to Facebook a icon show in launcher and a entry for Facebook at the top-right conner under the message icon. How can I disable this plug-in? It not in the list of my Extensions or Plugins list! Update Here is an screenshot:

  Read the article

• How to create wifihotspot in ubuntu 10.04 LTS

  - by aspdeepak

  I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

  Read the article

• Error splicing file: Input/output error with a USB SD/HC card reader [closed]

  - by PirateRussell

  I recently got a new Droid Bionic, and it has the SD/HC card. Today, I got a new USB card reader that reads the HC format. When I plug it into my Linux Mint 11 (katya), Gnome 32-bit computer, I get this error every I try to copy or move any file off of the card onto my desktop: Error splicing file: Input/output error I don't have the problem on a Windows Vista computer. Any ideas??? Thanks in advance...

  Read the article

• How to show context menu when right-click released?

  - by Kev

  I'm using Ubuntu 10.04. When I right-click, menu popup too quickly, and the first menu item is clicked. If I right-click in desktop, it create a new folder sometime. If I right-click in terminal, it open a new terminal sometime. ... Is there some way to delay context menu? Or how can I offset context menu a little bit pixels to the right-bottom direction? (like firefox) Or how can I config Gnome to popup menu when right-mouse released? (like windows xp)

  Read the article

• Gnome Mplayer failed to open VDPAU backend libvdpau_nvidia.so

  - by Tim

  When I open an avi file under Gnome Mplayer, there is an error report: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I then followed this blog to solve this problem, which suggests two ways. The first way is to call mplayer in terminal: mplayer -vo xv video.wmv This works for me. But I would like to try the second way, which is to write options in one of the configure files of Gnome Mplayer. I choose to write into ~/.mplayer/config, where I wrote: -vo xv But it does not work. So I was wondering if I make any mistake? What to write into the configure file? Thanks and regards!

  Read the article

• How to switch 'default' sound device controlled by hardware keys in Xubuntu?

  - by Ruth

  I installed xubuntu-desktop on a 12.04 Ubuntu upgrade after finding Gnome3 lacking. I've mostly been happy, but I've found an odd and frustrating bug. My laptop has two sound 'outputs' - an HDMI-out plug I never use, and the onboard speakers/headphones. For some reason, the hardware keys have been mapped to the HDMI output, even if I set it as 'fallback' in pavucontrol, and notify-osd only displays changes in the HDMI output (though the panel indicator volume control controls onboard sound). I'd ideally like both hardware keys and notify-osd to be looking at the onboard sound, though if I can't get notify-osd it's an acceptable loss. Having to click through a bunch of stuff to change volume is driving me crazy, though. Googling suggested that it /may/ be a Pulseaudio/ALSA conflict, but the hardware keys seem to change at least indicated volume in pavucontrol for HDMI as expected (I don't have an HDMI cable to test actual sound output)

  Read the article

• apt-get does not work with proxy

  - by tommyk

  For a command sudo apt-get update I get following error W: Failed to fetch http://ch.archive.ubuntu.com/ubuntu/dists/maverick-updates/multiverse/binary-i386/Packages.gz 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ) I am running Ubuntu 10.10 installed on Windows XP using VirtualBox. For internet connections I am using proxy server with an authentication. I tried to use gnome-network-proxy tool to set proxy settings system-wide. After that /etc/environment has been updated by http_proxy variable with the format http://my_proxy:port/, there were no authentication data. I checked this with firefox. Browser asked my for login and password and everything was working fine. It was unfortunately not the case for apt-get. I have also tried to do as described here. Unfortunately it does not work. May it be somehow related to the fact that a proxy is in a Windows domain, any ideas ? EDIT: My proxy name is http-proxy. Is '-' a special character here ?

  Read the article

• How do I execute a file from a FAT USB drive?

  - by Derek Redfern

  I'm trying to install a portable app onto my USB drive such that it is compatible with both Ubuntu and Windows (specifically, a program called eToys). Support is already built into the app for both operating systems - there's etoys.sh for Ubuntu and etoys.exe for Windows. I decided to install onto a FAT drive since that can be read from both systems. This works fine for Windows, but for some reason I cannot execute etoys.sh on Ubuntu. The problem is not with the file - when the whole folder is copied to the local hard drive, the app works great in Ubuntu. But when I try to execute it from the USB, it opens the file in a text editor. I then tried running it from a terminal, but I got the message "Permission denied." I've had the same problem with other executables as well. Is there an easy way to execute things from a USB stick? Thanks! -- Derek

  Read the article

• U1 music mp3 files not put into albums

  - by david

  Via the web page I can see that my files sync to U1 cloud servers. For the mp3 files, there seems to be a problem that several questions have already addressed but there does not seem to be a clear answer. If I use EasyTAG 2.1.6, I can see the ID3 tags on the local files and they seem to correctly define the artist, album title and track name. I expect it is not relevant, but I am using 10.04 with several different clients to rip the CDs. However, some mp3 files do not appear in the cloud at all and some others get assigned to Various Artist or Unknown artist. Does the music streaming (e.g. via Ipad) use the tags or the directory/file structure to assign the artist or album, and how quickly should it be expected to work? :-) Which version of ID3 tags does U1 music streaming work best with or prefer? thanks for any help David

  Read the article

• Ubuntu apt-get install linux-image

  - by Karl Kloppenborg

  I'd like someone to enlighten me as to what exactly goes on with aptitude when I want a kernel. As we all know, there's pretty much the following kernel option: linux-image-generic linux-image-server linux-image-virtual This morning I did an install and it had linux-image-generic on it, so I ran the following: apt-get -y remove linux-image-* This removed all my kernels as expected, I followed suit with running: apt-get install linux-image-virtual Says I've installed linux-image-server!? Am I missing something here, because I checked twice and it did it twice, however if I manually select a kernel (in my instance I used: linux-image-2.6.35-30-virtual) it will install linux-image-virtual. This seems rather strange to me? Details: Running Ubuntu 9.10 Am I missing something? :)

  Read the article

• What are the common maintenance tasks on ubuntu?

  - by DaNieL

  When i was using windows, i used to run defrags, ccleaner and revouninstaller once a month to keep the system and the registry clean. I know ubuntu (and all linux distro) has a different system structure and doesnt need defrags, but i've heard there are some mainenance tasks that help to keep the system clean (for example, sudo apt-get clean or sudo apt-get autoremove) How many of those commands/software (and please explain what they do and if they can compromise the system stability) do you know and use regularly?

  Read the article

• Can't delete an iptables chain

  - by Raul Adrian Altavano

  I'm having a problem on deleting a user-defined chain. these the are rules I entered. sudo iptables -t mangle -N internet sudo iptables -t mangle -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j internet sudo iptables -t mangle -A internet -j MARK --set-mark 99 sudo iptables -t nat -A PREROUTING -i eth1 -p tcp -m mark --mark 99 -m tcp --dport 80 -j DNAT --to-destination 192.168.3.1 When i'm using -X or -D, it gives me this error iptables: No chain/target/match by that name.

  Read the article

• Does Ubuntu run on current Asus Transformer Prime?

  - by Ubuntu User

  I've read instructions about dual boot Android / Transformer Prime (a significant factor in ordering one). Also about not working with /latest/ Transformer Prime (firmware / BIOS?) Also about imminent Ubuntu ARM support. Will I be able to run Ubuntu in a day or two when Transformer arrives? Also, am I right to assume I can restore Transformer to factory status if I break something in the attempt?

  Read the article

• SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick

  - by Andrei

  I'm trying SysRq+REISUB to see how it would be used to restart my system safely in case of emergency. However, I find that SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick. All other SysRq combinations appear to work correctly (i.e. SysRq+REISU). cat /proc/sys/kernel/sysrq returns 0. But I'm not sure it's relevant because SysRq certainly works. What can I do to have "B" actually restart the system? Thanks!

  Read the article

• Ubuntu 12.04 boot hangs with a black screen before grub menu after upgrade (gma500_gfx driver)

  - by Eric van der Vlist

  I am using Ubuntu on a fit-pc2 specifications and after upgrading from 10.04 to 12.04 I get a black screen at boot time (before displaying the grub menu) and the computer hangs with no disk activity. I have managed to boot Ubuntu 12.04 on a live USB key but had to add the following boot options to do so: console=tty1 or console=text acpi=off noapic nomodeset Using boot-repair, I have tried to add these options to /etc/default/grub (see this pastie log for instance) but I haven't been able to fix the black screen issue. I have tried many other things such as the workarounds mentioned on the web for PSB-GFX_drivers without any success and also to uncomment GRUB_TERMINAL=console with the result of getting a No video mode activated error. During these tests, I have managed to break /boot/grub/grub.cfg and could then hit grub in command line. This gave me the chance to check that I can boot without problem if I type: grub> set root=(hd0,1) grub> linux /vmlinuz root=/dev/sda1 ro acpi=off noapic nomodeset console=tty1 grub> initrd /initrd.img grub> boot How can I tell grub to use these options?

  Read the article

• Glib.h error while trying to compile an application

  - by user91125

  I've been trying to compile this app from source https://code.launchpad.net/gala and i keep getting this message when i run MAKE: Scanning dependencies of target gala [ 11%] Building C object CMakeFiles/gala.dir/src/DBus.c.o /home/camilo/notifications/build/src/DBus.c:21:18: fatal error: glib.h: No such file or directory compilation terminated. make[2]: *** [CMakeFiles/gala.dir/src/DBus.c.o] Error 1 make[1]: *** [CMakeFiles/gala.dir/all] Error 2 make: *** [all] Error 2 Even though I' have installed glib and there is the glib.h file camilo@ian:~$ find /usr -iname glib.h /usr/include/glib-2.0/glib.h Is it a bug form the application or is it something wrong with my system?

  Read the article

• Dummy output after upgrade from 12.04 to 12.10, even though sound card is detected

  - by user115441

  So I just recently upgraded my system from Ubuntu 12.04 to 12.10. However, when I booted into 12.10 for the first time, no sound comes out of my speakers. I checked the sound settings and the Dummy Output was the only thing showing up. I used "hwinfo --sound" to check to see if my sound card was actually installed, and it was installed. hwinfo --sound hal.1: read hal dataprocess 2687: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 11: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb._aiKlM91Nt0 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2668 "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" SubVendor: pci 0x107b "Gateway 2000" SubDevice: pci 0x4040 Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0x50240000-0x50243fff (rw,non-prefetchable) IRQ: 44 (91 events) Module Alias: "pci:v00008086d00002668sv0000107Bsd00004040bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown I'm not sure what to do here. The only time the sound will actually work is when I boot into my Windows partition and then reboot into Ubuntu. I mean I don't want to have to do that every time I want to use Ubuntu. I would really appreciate any help I can get on here.

  Read the article

• How do I add a network printer in Ubuntu 12.04?

  - by Ricky Robinson

  I know the name and the IP address of a network printer, but I can't seem to be able to search by IP address or name. Ubuntu developers love to move things around to make it difficult for users, so now with Ubuntu 12.04 I can only go on Application -> System Tools -> System Settings -> Printers, click on Network and a list of printers appears. Too bad the one I want to add isn't there. How do I do it? Here it suggests System -> Administration -> Printing, which simply doesn't exist.

  Read the article

• With a typical USB hard drive enclosure, is the full range of drive power management functionality available?

  - by intuited

  In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

  Read the article

• Unable to locate package appmenu-gtk3

  - by dre

  Yesterday I upgraded my version of Ubuntu. In stead of Gnome I now have the Unity environment. I'm not sure I like Unity better, so I'll give it a probation period to see if it's any good. What I really do not like though, is the Global menu bar. After googling I found that I had to enter: sudo apt-get remove appmenu-gtk3 appmenu-gtk appmenu-qt If I do that I get the error message: E: Unable to locate package appmenu-gtk3 Can anyone tell me what I'm doing wrong here and explain how to fix this problem?

  Read the article

• Screwed up terminal after modifying bashrc

  - by omgzor

  I ended up screwing up my terminal, while setting up Sbt for the Coursera Scala course. I can't summon gedit (or anything else) anymore. I get the following error: Command 'gedit' is available in '/usr/bin/gedit' The command could not be located because '/usr/bin' is not included in the PATH environment variable. Also, each new instance of Terminal writes these messages before any command is written: -bash: :/home/antonio/jdk7/jdk1.7.0_07/bin: No such file or directory -bash: export: `/home/antonio/Desktop/Scala/install/sbt/bin:/home/antonio/jdk7/jdk1.7.0_07/bin': not a valid identifier I recently did a manual installation of the jdk 7, which apparently works: java -version java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) While setting up Sbt, I made the mistake of editing bashrc by writing gedit ~/.bashrc on my terminal instead of writing gedit .bashrc, I wrote the following lines at the end of the bashrc file that opened: export PATH=/PATH/TO/YOUR/jdk1.7.0-VERSION/bin:$PATH export PATH=/home/antonio/jdk7/jdk1.7.0_07/bin:$PATH What is wrong here? How can I access my bashrc file and modify it again?

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >