Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 193/681 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• How do I share a complete XP disk so it can be seen from a Windows 7 system?

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

  Read the article

• Thunderbird gives " Not enough disk space " alert, after trying to download more emails ( Win 7, 64 bit )

  - by James C

  So, today I have installed Mozilla Thunderbird 24.2.0 on my Windows 7 (64 bit) machine. It was downloading emails, until it hit an error. An alert showed up saying : "There is not enough disk space to download new messages. Try deleting old mail, emptying the Trash folder, and compacting your mail folders, and then try again." Now, disk space is not a problem, there is enough free space left ( almost 50 % of the drive ). How to stop the alert and continue downloading ?

  Read the article

• Clicking sound on MacBook Pro 13" 2010 model when turning the laptop on it's horizontal axis

  - by roosteronacid

  When I leave my MacBook Pro 13" level for a minute or two (sometimes I only need to keep it level for a few seconds), and then pick it up and turn it on it's horizontal axis, I hear a single click, coming from either the hard drive or the Super Drive. Is the click I am hearing some sort of locking mechanism in the hard drive? Or in the Super Drive?.. And therefore nothing to worry about. Or is either my Super Drive or hard drive faulty?

  Read the article

• Are swapped in hot-swap drives allocated the same Windows drive letter each time?

  - by Margaret

  We are intending on purchasing a dedicated machine to perform the company's backups. We were considering buying the Dell T310, with the theory that we could swap the drives in and out for offsite backup. (As in, take out a drive, put a version a couple of days' old in its place, the old backup is updated to the current version.) One thing that may stymie this, though, is the system changing drive letters as things get moved in and out. Does anyone know whether this happens?

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• machine crash when connecting to external harddisk

  - by Gnot

  i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

  Read the article

• How do I find out with Ubuntu whether my computer has a SATA or PATA hard drive interface?

  - by Pieter

  Is there a tool for Ubuntu that will detect whether I have a SATA or a PATA hard drive interface, even if there's no hard drive inserted?

  Read the article

• Truecrypt - I lost my booloader and recovery drive but know my password.. any help?

  - by Yash

  So earlier today a not-so-thought-out install of Ubuntu overwrote my MBR and destroyed my TrueCrypt bootloader. On checking, it turns out that my rescue disk is only 2mb and doesn't contain any visible files inside it! I do know my password.. any ideas on how I could restore the Truecrypt Bootloader or create a new Rescue Disk? Thanks :)

  Read the article

• Any way to map WebDAV with SSL as network drive in Windows XP?

  - by Shadow

  I'm trying to map WebDAV with SSL as a network drive in Windows XP. (I've been at this for several hours) I can read the share just fine using a browser and with Network Places, but it refuses to mount as a network drive. I've tried it using the Windows explorer interface and net use. Net use with the \\server@ssl:443\webdav method gives System error 53. https://server/webdav gives error 67. Any help would be appreciated.

  Read the article

• Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

  - by Ray Nathan

  I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

  Read the article

• Virtualbox for Mac OS X - using an external USB drive, which filesystem is ideal?

  - by bencnscp

  Assuming that I am NOT going to add NTFS drivers that allow read+write of NTFS partitions, I was wondering if the choice of filesystem when I partition an external USB drive matters. The choices appear to be HFS+ vs. FAT32. For the time being, I simply created two half-sized paritions, one of each type. :) I plan to run various versions of Windows, and keep the VirtualBox files on the external drive.

  Read the article

• In CentOS 4.3 Webmin 1.3000 bandwidth monitoring is eating disk space. How to delete those files?

  - by Silkograph

  I maintain Linux server being used for Mail, Squid and DNS service. Recently I observed that something was eating server disk space. But at last, today I caught the culprit which was consuming the disk by storing large number of files. On this server, Webmin 1.300 is installed. We use Squid proxy and Sarg to monitor Internet access. I always manually clear Sarg generated files under /var/www/html/squid for last few years. But I never realized that Webmin is also storing some kind of bandwidth log files in its' directory structure. I have noticed that under /etc/webmin/bandwidth/hours it has stored more thousands of files since year 2007 totaling about 17 GB. We have used 40 GB HDD for this server machine. My question is how can I delete those (/etc/webmin/bandwidth/hours) files safely?

  Read the article

• Simple Ubuntu Server - Expanding disk space - adding a new drive LVM, RAID0 existing setup - how?

  - by NightWolf

  I have a 1TB ext4 partition mounted at / with all my data and Ubuntu 11.04 (natty) installed. Now this drive is almost full (I used it as a database server for some processing). RAID0 is ok, I can take a failure (touch wood). But I need a way to grow this partition. I have a new 1TB drive I want to add, however as my Ubuntu boot and all data is on the one partition I'm not sure how I can go about setting up a RAID0 or LVM array without loosing all my data. So the question is how can I extend my existing ext4 partition over two physical drives without losing data? Thanks!

  Read the article

• How is the 137GB limit counted in Virtual PC (two systems on one disk)?

  - by Nux

  I have a dual boot (Win7, XP) physical machine on my old computer which I want to virtualize and move to my new one. So I've uninstalled everything that I can and run shrink from RescueCD (used GParted). Now I have two about 80GiB partitions with a gap between them, so still this seem to be above the given limit. Still the resulting VHD (made with Disk2vhd) is much below the limit (about 110GiB) and both partitions are below the limit. So my question is - is it failing due to the limitations of disk size for VPC or is failing simply because it's a dual boot system. Or maybe it would work if I would move partitions to be close to each other (the gap between them is about 171GB and the whole physical disk is 1TB)?

  Read the article

• After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

  - by sin

  I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

  Read the article

• How to move the files of a replicated database (SQL Server 2008 R2) to a different drive

  - by ileon

  I would appreciate if someone could help me with the following problem: We use two SQL Server 2008 R2 databases under transactional replication: transactional publication with updatable subscriptions. because we run out of disk space we need to move the database files into a new drive. But I don't want to break the replication. What I'm looking for are the required steps that will help me to move the files to the new drive. Thanks

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• can I create disk partition for dual-boot Ubuntu on Windows 7 machine without Windows reinstall?

  - by EndangeringSpecies

  I want to setup dual boot Ubuntu on my machine in a separate partition. Plus, ideally, I want to get another, 3rd, partition for further OS experimentation. The hard drive is huge, hundreds of gigs, and essentially unfilled. The machine runs Windows 7 Home. Online I have seen mention of creation of partitions from inside Windows 7. But, I have also heard claims that to create the partition to house Ubuntu Windows has to be reinstalled, frying all the data on the machine. So, which one of these claims are right? Can you create additional partitions for other OS on a big Windows 7 hard drive without reinstall?

  Read the article

• Laptop crashes when connecting to external harddisk

  - by Gnot

  I recently had a problem with my laptop. when I booted up the machine, I would get a SMART failure error message and when I pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. Thinking that my hard disk was dying, I bought a new hard disk and installed on my laptop and so now my laptop is alright. However I need to recover data from that old hard disk, so I bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. The first few times when I connected, I could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. But now whenever I connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. Do you think my old hard disk is dead beyond repair? Or you can offer some help here? Any assistance would be appreciated!

  Read the article

• How to turn a hard drive into an NAS?

  - by AngryHacker

  I just got myself a 2TB drive (this one). I'd like it to be available to all the computers in the house. Is there a SATA enclosure available that turns a drive into an NAS?

  Read the article

• Anyone tried boosting Windows performance by putting Swap File on a Flash drive?

  - by Clay Nichols

  Windows Vista introduced ReadyBoost which lets you use a Flash drive as a third (after RAM and HD) type of memory. It occurred to me that I could boost peformance on an old PC here w/ Win XP (32 bit, max'd at 4GB RAM) by putting it's swap file (page file) on a flash drive. (Now, before anyone comments: apparently Flash drives (10-30MB/s transfer rates) are slower than HDD (100+ MB/s) (I'm asking that as a separate question on this forum).

  Read the article

• does upgrade from Windows XP (32 bit) to Windows 7 (64 bit) re-formats the hard drive?

  - by photographer

  I understand I'll need to re-install all the applications, but will upgrading from Windows XP (32 bit) to Windows 7 (64 bit) automatically format my hard drive removing out all my stuff? Or I'll just need to install all the appls but my files (like pictures and documents) will remain on that hard drive? (Trying to figure out if I really need to get 500GB spare space anywhere to copy my data temporarily to.)

  Read the article

• Moving SQL Server databases from one drive to another?

  - by Michael Stum

  I have a SQL Server 2008 R2 on my machine which stores everything on the C: drive (C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA). I got an additional Hard Drive now and would like to move all the databases over. It's 26 databases, so I'd like to avoid manually disconnecting/reconnecting them. Ideally I would just like to move them from C: and D: and tell SQL Server to look there. Downtime is not an issue, I just don't want to do dozens of mouse clicks :)

  Read the article

• How to partition my two hard drives

  - by Thoma Bigueres

  I've got a computer running under the OS "Window Server 2008 R2" on which i have : 60GB disk C: NTFS (Disk 0) 40GB unallocated memory (Disk 1) I would like to partition my disk so that i'll have : 30GB disk C: 70GB disk D: Can you help me on the step i should do to be abble to have this configuration ? I saw that first of all i should merge the two volumes into one, but when i click right on the c: Volume, i can't click on the "Extend Volume" link. Do you know how i can overcome this ? Thanks a lot

  Read the article

• Debian - Problems Unmounting External Hard Drives

  - by user331981

  I recently installed Debian Testing on a new laptop and I just noticed that I am having some issues with unmounting external hard drives. I am using Mate Desktop 1.8.1. With the 1st drive, if I right click on the drive and select “safely remove”: The drive unmounts, spins down, immediately spins back up an remounts. Unable to unmount. With the 2nd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down. With the 3rd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down, immediately spins back up but does not remount, and after 20 seconds, it spins down and stays that way. Behavior is the same on both USB 2.0 and USB 3.0 ports. On my last laptop, on which I also used Debian Testing + Mate desktop, the safe removal of drives worked out of the box and I never had an issue with it. The drives would unmount, spin down and stay that way. To remount the drive, one needed to unplug the device and plug it back in. I am unsure how to troubleshoot this issue and I am not sure if it is merely a matter of installing a “missing” package of editing a config file. Thank you in advance.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >