Search Results

Search found 22224 results on 889 pages for 'point of sale'.

Page 193/889 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• I’m a Phoenix… and I’m miffed

  - by Stan Spotts

  For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

  Read the article

• Challenge 19 – An Explanation of a Query

  - by Dave Ballantyne

  I have received a number of requests for an explanation of my winning query of TSQL Challenge 19. This involved traversing a hierarchy of employees and rolling a count of orders from subordinates up to superiors. The first concept I shall address is the hierarchyId , which is constructed within the CTE called cteTree.   cteTree is a recursive cte that will expand the parent-child hierarchy of the personnel in the table @emp.  One useful feature with a recursive cte is that data can be ‘passed’ from the parent to the child data.  The hierarchyId column is similar to the hierarchyId data type that was introduced in SQL Server 2008 and represents the position of the person within the organisation. Let us start with a simplistic example Albert manages Bob and Eddie.  Bob manages Carl and Dave. The hierarchyId will represent each person’s position in this relationship in a single field.  In this simple example we could append the userID together into a varchar field as detailed below. This will enable us to select a branch of the tree by filtering using Where hierarchyId  ‘1,2%’ to select Bob and all his subordinates.  Naturally, this is not comprehensive enough to provide a full solution, but as opposed to concatenating the Id’s together into a varchar datatyped column, we can apply the same theory to a varbinary.  By CASTing the ID’s into a datatype of varbinary(4) ,4 is used as 4 bytes of data are used to store an integer and building a hierarchyId  from those.  For example: The important point to bear in mind for later in the query is that the binary data generated is 'byte order comparable'. ie We can ORDER a dataset with it and the resulting data, will be in the order required. Now, would probably be a good time to download the example file and, after the cte ‘cteTree’, uncomment the line ‘select * from cteTree’.  Mark this and all prior code and execute.  This will show you how this theory directly relates to the actual challenge data.  The only deviation from the above, is that instead of using the ID of an employee, I have used the row_number() ranking function to order each level by LastName,Firstname.  This enables me to order by the HierarchyId in the final result set so that the result set is in the required order. Your output should be something like the below.  Notice also the ‘Level’ Column that contains the depth that the employee is within the tree.  I would encourage you to ‘play’ with the query, change the order in the row_number() or the length of the cast in the hierarchyId to see how that effects the outcome.  The next cte, ‘cteTreeWithOrderCount’, is a join between cteTree and the @ord table, and COUNT’s the number of orders per employee.  A LEFT JOIN is employed here to account for the occasion where an employee has made no sales.   Executing a ‘Select * from cteTreeWithOrderCount’ will return the result set as below.  The order here is unimportant as this is only a staging point of the data and only the final result set in a cte chain needs an Order by clause, unless TOP is utilised. cteExplode joins the above result set to the tally table (Nums) for Level Occurances.  So, if level is 2 then 2 rows are required.  This is done to expand the dataset, to create a new column (PathInc), which is the (n+1) integers contained within the heirarchyid.  For example, with the data for Robert King as given above, the below 3 rows will be returned. From this you can see that the pathinc column now contains the values for Andrew Fuller and Steven Buchanan who are Robert King’s superiors within the tree.    Finally cteSumUp, sums the orders for each person and their subordinates using the PathInc generated above, and the final select does the final simple mathematics and filters to restrict the result set to only the ‘original’ row per employee.

  Read the article

• SQL SERVER – What is a Technology Evangelist?

  - by pinaldave

  When you hear that someone is an “evangelist” the first thing that might pop into your mind is the Christian church.  In fact, the term did come from Christianity, and basically means someone who spreads the news about their faith.  In the technology world, the same definition is true. Technology evangelists are individuals who, professionally or in their spare time, spread the news about the latest new products.  Sounds like a salesperson, right?  No they are absolutely different. Salespeople also keep up to date with a large number of people, and like to convince others to buy their product – and some will go to any lengths to sell!  An evangelist, on the other hand, is brutally honest about the product, even if sometimes it means not making a sale.  An evangelist is out there to tell the TRUTH.  A salesperson needs to make sales. An Evangelist offers a Solution independent of Technology used – a Salesperson offers Particular Technology. With this definition in mind, you can probably think of a few technology evangelists you already know.  Maybe it’s a relative or a neighbor, someone who loves keeping up with the latest trends and is always willing to tell you about them if you ask even the simplest question.  And, in fact, they probably are evangelists and don’t even know it.  For a long time, the work of technology evangelism was in the hands of community and community technology leaders. Luckily now various organizations have understood the importance of the community and helping community to reach their goals. This has lead them to create role of “Technology Evangelists”. Let me talk about one of the most famous Evangelist of the SQL Server technology. Technology Evangelist only belongs to technology and above any country, race, location or any other thing. They are dedicated to the technology. Vinod Kumar is such a man, who have given a lot to community. For years he was a Technology Evangelist for Microsoft, and maintained a blog that was dedicated to spreading his enthusiasm for his favorite products.  He is one of the most respected Evangelists in the field, and has done a lot of work to define the job for other professionals. Vinod’s career has since progressed to the Microsoft Technology Center (read his post), but he is continuing to be a strong presence in the evangelism community.  I have a lot of respect for Vinod.  He has done a lot for the community and technology evangelism.  Everybody has dream to serve community the way he does, and he is a great role model for evangelists everywhere. On his blog, Vinod created one of the best descriptions of a Technology Evangelist.  It defined the position and also made the distinction between evangelist and salesperson extremely clear.  I will include the highlights of that list here, because no one can say it better than Vinod: Bundle of energy – Passion is their middle name Wonderful Story tellers Empathy, Trust, Loyalty, Openness, Accessibility and Warmth Technology Enthusiast – Doers Love people, people and more people – Community oriented Unique Style and Leadership qualities !!! Self-Confident, Self-Motivated but a student (To read the full list, see: Evangelism Beyond Borders with Evangelists) His blog is a must-read for anyone interested in technology evangelism as a career or simply a hobby.  His advice about how to gain an audience and become a trusted advisor is the best in the business. I think there is an evangelist in everyone. I, too, consider myself a technology evangelist.  Regular readers of this blog will recognize that I am dedicated to bringing information to the masses, and that I pride myself on being both brutally and honest and giving every product fair consideration. I think there is no better way of saying following subject. “Once an Evangelist – Always an Evangelist!” Reference: Pinal Dave (http://blog.SQLAuthority.com)     Filed under: About Me, Database, MVP, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Evangelist

  Read the article

• SOA Suite 11g Asynchronous Testing with soapUI

  - by Greg Mally

  Overview The Enterprise Manager test harness that comes bundled with SOA Suite 11g is a great tool for doing smoke tests and some minor load testing. When a more robust testing tool is needed, often times soapUI is leveraged for many reasons ranging from ease of use to cost effective. However, when you want to start doing some more complex testing other than synchronous web services with static content, then the free version of soapUI becomes a bit more challenging. In this blog I will show you how to test asynchronous web services with soapUI free edition. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/ Asynchronous Web Service Testing in soapUI When invoking an asynchronous web service, the caller must provide a callback for the response. Since our testing will originate from soapUI, then it is only natural that soapUI would provide the callback mechanism. This mechanism in soapUI is called a MockService. In a nutshell, a soapUI MockService is a simulation of a Web Service (aka, a process listening on a port). We will go through the steps in setting up the MockService for a simple asynchronous BPEL process. After creating your soapUI project based on an asynchronous BPEL process, you will see something like the following: Notice that soapUI created an interface for both the request and the response (i.e., callback). The interface that was created for the callback will be used to create the MockService. Right-click on the callback interface and select the Generate MockService menu item: You will be presented with the Generate MockService dialogue where we will tweak the Path and possibly the port (depends upon what ports are available on the machine where soapUI will be running). We will adjust the Path to include the operation name (append /processResponse in this example) and the port of 8088 is fine: Once the MockService is created, you should have something like the following in soapUI: This window acts as a console/view into the callback process. When the play button is pressed (green triangle in the upper left-hand corner), soapUI will start a process running on the configured Port that will accept web service invocations on the configured Path: At this point we are “almost” ready to try out the asynchronous test. But first we must provide the web service addressing (WS-A) configuration on the request message. We will edit the message for the request interface that was generated when the project was created (SimpleAsyncBPELProcessBinding > process > Request 1 in this example). At the bottom of the request message editor you will find the WS-A configuration by left-clicking on the WS-A label: Here we will setup WS-A by changing the default values to: Must understand: TRUE Add default wsa:Action: Add default wsa:Action (checked) Reply to: ${host where soapUI is running}:${MockService Port}${MockService Path} … in this example: http://192.168.1.181:8088/mockSimpleAsyncBPELProcessCallbackBinding/processResponse We now are ready to run the asynchronous test from soapUI free edition. Make sure that the MockService you created is running and then push the play button for the request (green triangle in the upper left-hand corner of the request editor). If everything is configured correctly, you should see the response show up in the MockService window: To view the response message/payload, just double-click on a response message in the Message Log window of the MockService: At this point you can now expand the project to include a Test Suite for some load balance tests etc. This same topic has been covered in various detail on other sites/blogs, but I wanted to simplify and detail how this is done in the context of SOA Suite 11g. It also serves as a nice introduction to another blog of mine: SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition.

  Read the article

• IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

  - by Sam Abraham

  IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

  Read the article

• 11 Types of Developers

  - by Lee Brandt

  Jack Dawson Jack Dawson is the homeless drifter in Titanic. At one point in the movie he says, “I figure life’s a gift, and I don’t intend on wasting it.” He is happy to wander wherever life takes him. He works himself from place to place, making just enough money to make it to his next adventure. The “Jack Dawson” developer clings on to any new technology as the ‘next big thing’, and will find ways to shoe-horn it in to places where it is not a fit. He is very appealing to the other developers because they want to try the newest techniques and tools too, He will only stay until the new technology either bores him or becomes problematic. Jack will also be hard to find once the technology has been implemented, because he will be on to the next shiny thing. However, having a Jack Dawson on your team can be beneficial. Jack can be a great ally when attempting to convince a stodgy, corporate entity to upgrade. Jack usually has an encyclopedic recall of all the new features of the technology upgrade and is more than happy to interject them in any conversation. Tom Smykowski Tom is the neurotic employee in Office Space, and is deathly afraid of being fired. He will do only what is necessary to keep the status quo. He believes as long as nothing changes, his job is safe. He will scoff at anything new and be the naysayer during any change initiative. Tom can be useful in off-setting Jack Dawson. Jack will constantly be pushing for change and Tom will constantly be fighting it. When you see that Jack is getting kind of bored with a new technology and Tom has finally stopped wetting himself at the mere mention of it, then it is probably the sweet spot of beginning to implement that new technology (providing it is the right tool for the job). Ray Consella Ray is the guy who built the Field of Dreams. He took a risk. Sometimes he screwed it up, but he knew he didn’t want to end up regretting not attempting it. He constantly doubted himself, but he knew he had to keep going. Granted, he was doing what the voices in his head were telling him to do, but my point is he was driven to do something that most people considered crazy. Even when his friends, his wife and even he told himself he was crazy, somewhere inside himself, he knew it was the right thing to do. These are the innovators. These are the Bill Gates and Steve Jobs of the world. The take risks, they fail, they learn and the get better. Obviously, this kind of person thrives in start-ups and smaller companies, but that is due to their natural aversion to bureaucracy. They want to see their ideas put into motion quickly, and withdrawn quickly if it doesn’t work. Short feedback cycles are essential to Ray. He wants to know if his idea is working or not. He wants to modify or reverse his idea if it is not working or makes things worse. These are the agilistas. May I always be one.

  Read the article

• POP Forums v9 Beta 1 for ASP.NET MVC 3 posted to CodePlex!

  - by Jeff

  As promised, I posted a beta build of my forum app for ASP.NET MVC 3. Get the new goodies here: http://popforums.codeplex.com/releases/view/58228 This is the first beta for the ASP.NET MVC 3 version of POP Forums. It is nearly feature complete, and ready for testing and feedback. For previous release notes, look here, here and here.Check out the live preview: http://preview.popforums.com/ForumsSetup instructions are on the home page of this project. The new hotness in the beta, or what has been done since the last preview: All views converted to use Razor E-mail subscription/notification of new posts New post indicators/mark read buttons Permalinks to posts Jump to newest post (from new post indicators) Recent topics Favorite topics Moderator functions for topics (pin/close/delete, plus move and rename) Search, ported from v8. Not a ton of optimization here, or new unit testing, but the old version worked pretty well User posts (topics the user posted in) Forgot password Vanity items (signatures and avatars) Hide vanity items per user preference Some minor data caching where appropriate A little bit of UI refinement Lots-o-bug fixes Lots-o-unit tests What's next? The plan between now and the next beta is as follows: Continue working through features/tasks, and fix bugs as they're reported Integrate the forum into a real, production site Refine the UI Refactor as much as possible... the code organization is not entirely logical in some places After the second beta, a release candidate will follow, with a real "final" release after that. Subsequent releases should come relatively frequently and without a lot of risk. The trick in building this thing has been that it mostly tossed the previous WebForms version, which was all full of crusties. The time table for this is a little harder to pin down, as day jobs and families will have their effect. Other notes Refactoring will be a priority. As the features of MVC have evolved, so have my desires to use it in a fashion that makes things clear and easy to follow. I don't even know if anyone will ever start mucking around in the code, but on the off chance they do, I'd like what they find to not suck. Other nice-to-haves are builds to target Windows Azure and SQL CE. A nice setup UI would be super too. I think the ASP.NET MVC world has gone long enough without a decent forum.The biggest challenge that I've found is making the forum something that can be dropped in any app. While it does rope its views into an area, areas are mostly just routing details. I haven't thought of a clever way yet to limit dependency injection, for example, to just the forum bits. I mean, everyone should be using Ninject, but how realistic is that? ;)How much time and effort should you spend on POP Forums in its current state? Change is inevitable, but at this point I'm reasonably committed to not changing the database schema. I really think it will stay as-is. All bets are off for the various interfaces throughout the app, but the data should generally resist change. It's not even that different from v8, which was one of the original goals because I didn't want to rewrite SQL or introduce a new ORM or whatever. My point is that if you wanted to build a site around this today, even though it's not entirely functional, I think it's low risk in terms of data loss. I can't vouch for whether or not you know what you're doing.I've been having some chats with people lately about quoting posts, and honestly there has to be something better and straight forward. That continues to be a holy grail of mine, and some day, I hope to find it.Enjoy... it's starting to feel more real every day!

  Read the article

• Tool to convert blogger.com content to dasBlog

  - by Daniel Moth

  Due to blogger.com dropping FTP support, I've had to move my blog. If you are in a similar situation, this post will help you by showing you the necessary steps to take. Goals No loss on blog posts, comments AND all existing permalinks continue to work (redirect to the correct place). Steps Download the XML files corresponding to your blogger.com content and store them in a folder. Install and configure dasBlog on your local machine. Configure your web.config file (will need updating once you run step 4). Use the tool I describe further down to generate the content and place it at the right place. Test your site locally. Once you are happy, repeat step 2 on your hosting provider of choice. Remember to copy up your dasBlog theme folder if you created one. Copy up the local web.config file and the XML dasBlog content files generated by the tool of step 4. Test your site on the server. Once you are happy, go live (following instructions from your hoster). In my case, I gave the nameservers from my new hoster to my existing domain registrar and they made the switch. Tool (code) At step 4 above I referred to a tool. That is an overstatement, it is simply one 450-line C#code file that you can download here: BloggerToDasBlog.cs. I used this from a .NET 2.0 console app (and I run it under the Visual Studio debugger, i.e. F5) like this: Program.cs. The console app referenced the dasBlog 2.3 ASP.NET Blogging Engine i.e. the newtelligence.DasBlog.Runtime.dll assembly. Let me describe what the code does: Input: A path to a folder where the XML files from the old blogger.com blog reside. It can deal with both types of XML file. A full file path to a file where it creates XML redirect input (as required by the rewriteMap mentioned here). The blog URL. The author's email. The blog author name. A path to an empty folder where the new XML dasBlog content files will get created. The subfolder name used after the domain name in the URL. The 3 reg ex patterns to use. You can use the same as mine, but will need to tweak the monthly_archive rule. Again, to see what values I passed for all the above, see my Program.cs file. Output: It creates dasBlog XML files in the folder specified. It creates those by parsing the old blogger.com XML files that reside in the folder specified. After that is generated, copy it to the "Content" folder under your dasBlog installation. It creates an XML file with a single ignorable root element and a bunch of inner XML elements. You can copy paste these in the web.config file as discussed in this post. Other notes: For each blog post, it detects outgoing links to itself (i.e. to the same blog), and rewrites those to point to the new URLs. So internal links do not rely on the web.config redirects. It deals with duplicate post titles; it does not deal with triplicates and higher. Removes all references to blogger.com (e.g. references to [email protected], the injected hidden footer for statistics that each blog post has and others – see the code). It creates a lot of diagnostic output (in the Output window) and indeed the documentation for the code is in the Debug.WriteLine statements ;) This is not code I will maintain or support – it was a throwaway one-use project that I am sharing here as a starting point for anyone finding themselves in the same boat that I was. Enjoy "as is". Comments about this post welcome at the original blog.

  Read the article

• Pet Store Loyalty Programs: I'm Not Loyal Yet!

  - by ruth.donohue

  After two years of constantly being asked (aka "pestered) by my now eight-year-old daughter for a dog (or any pet that is more interactive than a goldfish), I've finally compromised with a hamster purely by chance. Friends of ours had recently brought home a female hamster, and (surprise, surprise) two weeks later, they were looking for homes for 11 baby hamster pups. Since the pups were not yet ready to be weaned from their mother, my daughter and I had several weeks to get ready -- and we spent that extra time visiting a number of local pet stores and purchasing an assortment of hamster books, toys, exercise equipment, food, bedding, and cage -- not cheap! Now, I'm usually an online shopper (i.e. I love reading user reviews and comparing prices), but for kids, there is absolutely no online substitute for actually walking into a store and physically picking out something you want. We have two competing pet shops within close proximity to where we live, and I signed up for their rewards programs to get discounts on select items. I'm sure it takes a while to get my data into the system (after all, I did fill out a form the old-fashioned way), but as it has been more than two weeks for one store and over a week for the other, the window of opportunity is getting smaller as we by now pretty much have most of what we think we need. Everything I've purchased has been purely hamster or small animal related, so in an ideal world, the stores would have me easily figured out as a hamster owner. Here is what I would be expecting of a loyalty rewards program: Point me to some useful links, either information provied by the company or external websites where I can learn more. Any value-add a business can provide to make my life easier makes me a much more loyal customer. What things can I expect as a new pet owner? Any hamster communities? Any hamster-related events? Any vets that specialize in small animals in the vicinity? Send me an email with other related products I may be interested in. Upsell and cross-sell to me. We've go the basics and a couple of luxuries, but at this point, I'm pretty excited (surprisingly) about the hamster, and my daughter is footing the bill with her birthday and Christmas money. She and I would be more than happy to spend her money! Get this information to me faster. As I mentioned, my window of opportunity is getting smaller, as eithe rmy daughter's money will run out on other things or we'll start losing the thrill of buying new hamster toys and treats. I realize this is easier said than done, and undoubtedly, the stores are getting value knowing my basic customer information and purchase history. Buth, they could really benefit by delivering a loyalty program that really earned my loyalty. "Goldeen" needs a new water bottle, yogurt chips, and chew toys as he doesn't seem to like the ones we bought. So for now, I'll just go to whichever store is the most convenient. Oh, and just for fun (not related to this post), here are a couple of videos my daughter really got a kick out of watching: Hamster on a Piano Tic in a Spin-Dryer

  Read the article

• Backup and Transfer Foobar2000 to a New Computer

  - by Mysticgeek

  If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server.  Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists.   Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• So No TECH job so far.

  - by Ratman21

  O I found some temp work for the US Census and I have managed to keep the house (so far) but, it looks like I/we are going to have to do a short sale and the temp job will be ending soon.   On top of that it looks like the unemployment fund for me is drying up. I will have about one month left after the Census job is done. I am now down to Appling for work at the KFC.   This is type a work I started with, before I was a tech geek and really I didn’t think I would be doing this kind of work in my later years but, I have a wife and kid. So I got to suck it up and do it.   Oh and here is my new resume…go ahead I know you want to tare it up. I really don’t care any more.   Scott L. Newman 45219 Dutton Way, Callahan, FL32011 H: (904)879-4880 C: (352)356-0945 E: [email protected] Web:  http://beingscottnewman.webs.com/                                                       ______                                                                                 OBJECTIVE To obtain a Network or Technical support position     KEYWORD SUMMARY CompTIA A+, Network+, and Security+ Certified., Network Operation, Technical Support, Client/Vendor Relations, Networking/Administration, Cisco Routers/Switches, Helpdesk, Microsoft Office Suite, Website Design/Dev./Management, Frame Relay, ISDN, Windows NT/98/XP, Visio, Inventory Management, CICS, Programming, COBOL IV, Assembler, RPG   QUALIFICATIONS SUMMARY Twenty years’ experience in computer operations, technical support, and technical writing. Also have two and half years’ experience in internet / intranet operations.   PROFESSIONAL EXPERIENCE October 2009 – Present*   Volunteer Web site and PC technician – Part time       True Faith Christian Fellowship Church – Callahan, FL, Project: Create and maintain web site for Church to give it a worldwide exposure Aug 2008 – September 2009:* Volunteer Church sound and video technician – Part time      Thomas Creek Baptist Church – Callahan, FL   *Note Jobs were for the learning and/or keeping updated on skills, while looking for a tech job and training for new skills.   February 2005 to October 2008: Client Server Dev/Analyst I, Fidelity National Information Services, Jacksonville, FL (FNIS acquired Certegy in 2005 and out of 20 personal, was one of three kept on.) August 2003 to February 2005: Senior NetOps Operator, Certegy, St.Pete, Fl. (August 2003, Certegy terminated contract with EDS and out of 40 personal, was one of six kept on.) Projects: Creation and update of listing and placement for all raised floor equipment at St.Pete site. Listing was made up of, floor plan of the raised floor and equipment racks diagrams showing the placement of all devices using Visio. This was cross-referenced with an inventory excel document showing what dept was responsible for each device. Sole creator of Network operation and Server Operation procedures guide (NetOps Guide).  Expertise: Resolving circuit and/or router issues or assist circuit carrier in resolving issue from the company Network Operation Center (NOC). As well as resolving application problems or assist application support in resolution of it.     July 1999 to August 2003: Senior NetOps Operator,EDS (Certegy Account), St.Pete, FL Same expertise and on going projects as listed above for FNIS/Certegy. (Equifax outsourced the NetOps dept. to EDS in 1999)         January 1991 to July 1999: NetOps/Tandem Operator, Equifax, St.Pete & Tampa, FL Same as all of the above for FNIS/Certegy/EDS except for circuit and router issues   EDUCATION ? New Horizons Computer Learning Center, Jacksonville, Florida - CompTIA A+, Security+, and     Network+ Certified.                        Currently working on CCNA Certification 07/30/10 ? Mott Community College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese

  Read the article

• How to use crontab, .netrc, and git push?

  - by Jon

  Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

  Read the article

• Converting Openfire IM datetime values in SQL Server to / from VARCHAR(15) and DATETIME data types

  - by Brian Biales

  A client is using Openfire IM for their users, and would like some custom queries to audit user conversations (which are stored by Openfire in tables in the SQL Server database). Because Openfire supports multiple database servers and multiple platforms, the designers chose to store all date/time stamps in the database as 15 character strings, which get converted to Java Date objects in their code (Openfire is written in Java).  I did some digging around, and, so I don't forget and in case someone else will find this useful, I will put the simple algorithms here for converting back and forth between SQL DATETIME and the Java string representation. The Java string representation is the number of milliseconds since 1/1/1970.  SQL Server's DATETIME is actually represented as a float, the value being the number of days since 1/1/1900, the portion after the decimal point representing the hours/minutes/seconds/milliseconds... as a fractional part of a day.  Try this and you will see this is true:     SELECT CAST(0 AS DATETIME) and you will see it returns the date 1/1/1900. The difference in days between SQL Server's 0 date of 1/1/1900 and the Java representation's 0 date of 1/1/1970 is found easily using the following SQL:   SELECT DATEDIFF(D, '1900-01-01', '1970-01-01') which returns 25567.  There are 25567 days between these dates. So to convert from the Java string to SQL Server's date time, we need to convert the number of milliseconds to a floating point representation of the number of days since 1/1/1970, then add the 25567 to change this to the number of days since 1/1/1900.  To convert to days, you need to divide the number by 1000 ms/s, then by  60 seconds/minute, then by 60 minutes/hour, then by 24 hours/day.  Or simply divide by 1000*60*60*24, or 86400000.   So, to summarize, we need to cast this string as a float, divide by 86400000 milliseconds/day, then add 25567 days, and cast the resulting value to a DateTime.  Here is an example:   DECLARE @tmp as VARCHAR(15)   SET @tmp = '1268231722123'   SELECT @tmp as JavaTime, CAST((CAST(@tmp AS FLOAT) / 86400000) + 25567 AS DATETIME) as SQLTime   To convert from SQL datetime back to the Java time format is not quite as simple, I found, because floats of that size do not convert nicely to strings, they end up in scientific notation using the CONVERT function or CAST function.  But I found a couple ways around that problem. You can convert a date to the number of  seconds since 1/1/1970 very easily using the DATEDIFF function, as this value fits in an Int.  If you don't need to worry about the milliseconds, simply cast this integer as a string, and then concatenate '000' at the end, essentially multiplying this number by 1000, and making it milliseconds since 1/1/1970.  If, however, you do care about the milliseconds, you will need to use DATEPART to get the milliseconds part of the date, cast this integer to a string, and then pad zeros on the left to make sure this is three digits, and concatenate these three digits to the number of seconds string above.  And finally, I discovered by casting to DECIMAL(15,0) then to VARCHAR(15), I avoid the scientific notation issue.  So here are all my examples, pick the one you like best... First, here is the simple approach if you don't care about the milliseconds:   DECLARE @tmp as VARCHAR(15)   DECLARE @dt as DATETIME   SET @dt = '2010-03-10 14:35:22.123'   SET @tmp = CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15)) + '000'   SELECT @tmp as JavaTime, @dt as SQLTime If you want to keep the milliseconds:   DECLARE @tmp as VARCHAR(15)   DECLARE @dt as DATETIME   DECLARE @ms as int   SET @dt = '2010-03-10 14:35:22.123'   SET @ms as DATEPART(ms, @dt)   SET @tmp = CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15))           + RIGHT('000' + CAST(@ms AS VARCHAR(3)), 3)   SELECT @tmp as JavaTime, @dt as SQLTime Or, in one fell swoop:   DECLARE @dt as DATETIME   SET @dt = '2010-03-10 14:35:22.123'   SELECT @dt as SQLTime     , CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15))           + RIGHT('000' + CAST( DATEPART(ms, @dt) AS VARCHAR(3)), 3) as JavaTime   And finally, a way to simply reverse the math used converting from Java date to SQL date. Note the parenthesis - watch out for operator precedence, you want to subtract, then multiply:   DECLARE @dt as DATETIME   SET @dt = '2010-03-10 14:35:22.123'   SELECT @dt as SQLTime     , CAST(CAST((CAST(@dt as Float) - 25567.0) * 86400000.0 as DECIMAL(15,0)) as VARCHAR(15)) as JavaTime Interestingly, I found that converting to SQL Date time can lose some accuracy, when I converted the time above to Java time then converted  that back to DateTime, the number of milliseconds is 120, not 123.  As I am not interested in the milliseconds, this is ok for me.  But you may want to look into using DateTime2 in SQL Server 2008 for more accuracy.

  Read the article

• Where’s my MD.050?

  - by Dave Burke

  A question that I’m sometimes asked is “where’s my MD.050 in OUM?” For those not familiar with an MD.050, it serves the purpose of being a Functional Design Document (FDD) in one of Oracle’s legacy Methods. Functional Design Documents have existed for many years with their primary purpose being to describe the functional aspects of one or more components of an IT system, typically, a Custom Extension of some sort. So why don’t we have a direct replacement for the MD.050/FDD in OUM? In simple terms, the disadvantage of the MD.050/FDD approach is that it tends to lead practitioners into “Design mode” too early in the process. Whereas OUM encourages more emphasis on gathering, and describing the functional requirements of a system ahead of the formal Analysis and Design process. So that just means more work up front for the Business Analyst or Functional Consultants right? Well no…..the design of a solution, particularly when it involves a complex custom extension, does not necessarily take longer just because you put more thought into the functional requirements. In fact, one could argue the complete opposite, in that by putting more emphasis on clearly understanding the nuances of functionality requirements early in the process, then the overall time and cost incurred during the Analysis to Design process should be less. In short, as your understanding of requirements matures over time, it is far easier (and more cost effective) to update a document or a diagram, than to change lines of code. So how does that translate into Tasks and Work Products in OUM? Let us assume you have reached a point on a project where a Custom Extension is needed. One of the first things you should consider doing is creating a Use Case, and remember, a Use Case could be as simple as a few lines of text reflecting a “User Story”, or it could be what Cockburn1 describes a “fully dressed Use Case”. It is worth mentioned at this point the highly scalable nature of OUM in the sense that “documents” should not be produced just because that is the way we have always done things. Some projects may well be predicated upon a base of electronic documents, whilst other projects may take a much more Agile approach to describing functional requirements; through “User Stories” perhaps. In any event, it is quite common for a Custom Extension to involve the creation of several “components”, i.e. some new screens, an interface, a report etc. Therefore several Use Cases might be required, which in turn can then be assembled into a Use Case Package. Once you have the Use Cases attributed to an appropriate (fit-for-purpose) level of detail, and assembled into a Package, you can now create an Analysis Model for the Package. An Analysis Model is conceptual in nature, and depending on the solution being developing, would involve the creation of one or more diagrams (i.e. Sequence Diagrams, Collaboration Diagrams etc.) which collectively describe the Data, Behavior and Use Interface requirements of the solution. If required, the various elements of the Analysis Model may be indexed via an Analysis Specification. For Custom Extension projects that follow a pure Object Orientated approach, then the Analysis Model will naturally support the development of the Design Model without any further artifacts. However, for projects that are transitioning to this approach, then the various elements of the Analysis Model may be represented within the Analysis Specification. If we now return to the original question of “Where’s my MD.050”. The full answer would be: Capture the functional requirements within a Use Case Group related Use Cases into a Package Create an Analysis Model for each Package Consider creating an Analysis Specification (AN.100) as a index to each Analysis Model artifact An alternative answer for a relatively simple Custom Extension would be: Capture the functional requirements within a Use Case Optionally, group related Use Cases into a Package Create an Analysis Specification (AN.100) for each package 1 Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1

  Read the article

• A Letter for Your CEO About Social Marketing’s Future

  - by Mike Stiles

  We’ll leave it to you to decide if or how to sneak this in front of them. Dear Chief: This social marketing thing looks serious. It’s gone beyond having a Facebook page and putting our info and a few promotions on it. It’s seriously disrupting how we’ve always done marketing. And its implications reach well beyond marketing. My concern is that we stay positioned ahead of these changes and are prepared to embrace, adapt and capitalize on these new capabilities as opposed to spending valuable time and money trying to shoehorn social into “the way we’ve always done things.” I’m also concerned about what happens if our competition executes on this before we do. The days of being able to impose our ad messaging on the masses to great effect are numbered. The public now has the tech tools and ability to filter out things that are irrelevant to them. And frankly, spending ad dollars to reach unlikely prospects isn’t the most efficient path for us either. Today, our customers have to genuinely love what we do. That starts with a renewed, customer-centric focus on the quality and usability of our product. If their experience with it is bad, they now have very connected, loud voices that will testify against us. We can’t afford that. Next, their customer service experience, before and after the sale, has to be a pleasant surprise. That requires truly knowing our customers and listening to them. Lip service won’t cut it. We have to get and use as much data on the customer as possible, interact with them wherever they want to interact with us, and commit to impressing them. If we do, they’ll get out there and advertise for us. Since peer-to-peer recommendation is the most effective marketing, that’s money in the bank. Social marketing is about forming relationships, same as how individuals use social. We want them to know us, trust us, and get real value from knowing us. That requires honesty and transparency that before now might have been uncomfortable. I propose that if we clearly make everything we do about our customers’ wants and needs, we’ll have nothing to hide. It will solidify customer loyalty, retention, and thus, revenue. These things can’t happen without certain tools and structural changes in the organization. There are social cloud platforms that integrate social management into all of the necessary areas: CRM, customer service, sales, marketing automation, content marketing, ecommerce, etc. This is will give us a real-time, complete view of the customer so their every interaction with us is attentive, personalized, accurate, relevant, and satisfying. Without it, we’re just a collage of disjointed systems, each gathering data that informs only its own departmental silo. The customer is voluntarily giving us everything we need to know about them to win them over, but we have to start listening and putting the pieces together. There’s still time. Brands are coming to terms with this transition to the socially enabled enterprise, but so far they aren’t moving very fast. Like us, they’re dealing with long-entrenched technologies and processes. CMO’s and CIO’s have to form new partnerships. Content operations have to be initiated and properly staffed and funded. Various departments must be able to utilize interconnected big data. What will separate the winners from the losers? Well chief, that’s why I’m writing you. It’s in your hands. These initiatives won’t get the kind of priority and seriousness that inspire actual deadlines & action unless they come from your desk. You have to be the champion of customer centricity. You have to be our change agent. You have to be our innovator. Otherwise, it’s going to be business as usual, and that puts us in a very vulnerable place. Sincerely, Your Team @mikestilesPhoto: Gary Scott, stock.xchng

  Read the article

• Type Casting variables in PHP: Is there a practical example?

  - by Stephen

  PHP, as most of us know, has weak typing. For those who don't, PHP.net says: PHP does not require (or support) explicit type definition in variable declaration; a variable's type is determined by the context in which the variable is used. Love it or hate it, PHP re-casts variables on-the-fly. So, the following code is valid: $var = "10"; $value = 10 + $var; var_dump($value); // int(20) PHP also alows you to explicitly cast a variable, like so: $var = "10"; $value = 10 + $var; $value = (string)$value; var_dump($value); // string(2) "20" That's all cool... but, for the life of me, I cannot conceive of a practical reason for doing this. I don't have a problem with strong typing in languages that support it, like Java. That's fine, and I completely understand it. Also, I'm aware of—and fully understand the usefulness of—type hinting in function parameters. The problem I have with type casting is explained by the above quote. If PHP can swap types at-will, it can do so even after you force cast a type; and it can do so on-the-fly when you need a certain type in an operation. That makes the following valid: $var = "10"; $value = (int)$var; $value = $value . ' TaDa!'; var_dump($value); // string(8) "10 TaDa!" So what's the point? Can anyone show me a practical application or example of type casting—one that would fail if type casting were not involved? I ask this here instead of SO because I figure practicality is too subjective. Edit in response to Chris' comment Take this theoretical example of a world where user-defined type casting makes sense in PHP: You force cast variable $foo as int -- (int)$foo. You attempt to store a string value in the variable $foo. PHP throws an exception!! <--- That would make sense. Suddenly the reason for user defined type casting exists! The fact that PHP will switch things around as needed makes the point of user defined type casting vague. For example, the following two code samples are equivalent: // example 1 $foo = 0; $foo = (string)$foo; $foo = '# of Reasons for the programmer to type cast $foo as a string: ' . $foo; // example 2 $foo = 0; $foo = (int)$foo; $foo = '# of Reasons for the programmer to type cast $foo as a string: ' . $foo; UPDATE Guess who found himself using typecasting in a practical environment? Yours Truly. The requirement was to display money values on a website for a restaurant menu. The design of the site required that trailing zeros be trimmed, so that the display looked something like the following: Menu Item 1 .............. $ 4 Menu Item 2 .............. $ 7.5 Menu Item 3 .............. $ 3 The best way I found to do that wast to cast the variable as a float: $price = '7.50'; // a string from the database layer. echo 'Menu Item 2 .............. $ ' . (float)$price; PHP trims the float's trailing zeros, and then recasts the float as a string for concatenation.

  Read the article

• Instant Rename and Rename Refactoring

  - by Petr

  During the last weeks I have got  a few questions about rename refactoring and some users also complain to me that the refactoring in NetBeans 6.x was much faster. So I would like to explain the situation. For some people, who don't know, Instant Rename action and Rename Refactoring  can look like one action. But it's not true, even if  both actions use the same shortcut (CTRL + R). NetBeans 6.x contained only Instant Rename action (speaking about PHP support), which we can mark as very simple rename refactoring through one file. From NetBeans 7.0 the Instant Rename action works only in "non public" context. It means that this action is used for fast renaming variables that has local context like inside a method, or for renaming private methods and fields that can not be used outside of the scope, where they are declared. From user point of view these two action can be simply recognized. When is after CTRL+R called Instant Rename action, then the identifier is surrounded with rectangle and you can rename it directly in the file. It's fast and simple, also the usages of this identifier are renamed in the same time as you write. The picture below shows Instant Rename action for $message identifier, that is visible only in the print_test method and due this after CTRL+R is called Instant Rename. In NetBeans 7.0, there was added Rename Refactoring that is called for public identifiers. It means for identifiers that could be used in other files. If you press CTRL+R shortcut when the caret is inside $hello identifier from the picture above, NetBeans recognizes that $hello is declared / used in a global context and calls the Rename Refactoring that brings a dialog to change the name of the identifier. From this dialog you have to preview suggested changes, through pressing Preview button and then execute the refactoring through Do Refactoring button. Yes, it's more complicated from user point of view than Instant Rename, but in Rename Refactoring NetBeans can change more files at once. It should be  the developer responsibility to decide whether the suggested changes are right and the refactoring can be executed or in some files original name should be kept. Someone can argue that he doesn't use $hello variable in any other file so Instant Rename could be used in such case. Yes it's true, but in such case NetBeans has to know all usages of all identifiers and keep this informations up to date during editing a file. I'm sure that this is not possible due to the performance problems, mainly for big projects. So the usages are computed after pressing the Preview button. And why is the Refactor button always disabled in the Rename dialog and user has to always go through the preview phase? NetBeans has API and SPI for implementing refactoring actions and this dialog is a part of this infrastructure. If you rename an identifier for example in Java, the Refactor buttons is enabled, but Java is strongly type language and you can be almost in 99% sure that the IDE will suggest the right results. In PHP as a dynamic language, we can not be sure, what NetBeans finds is only a "guess". This is why NetBeans pushes developers to preview the changes for PHP rename. I hope that I have explain it clearly. I'm open to any discussion. What I have described above is situation in NetBeans 7.0, 7.0.1 and probably it will be also in NetBeans 7.1, because there is no plan to change it. Please write your opinion here.

  Read the article

• Introducing functional programming constructs in non-functional programming languages

  - by Giorgio

  This question has been going through my mind quite a lot lately and since I haven't found a convincing answer to it I would like to know if other users of this site have thought about it as well. In the recent years, even though OOP is still the most popular programming paradigm, functional programming is getting a lot of attention. I have only used OOP languages for my work (C++ and Java) but I am trying to learn some FP in my free time because I find it very interesting. So, I started learning Haskell three years ago and Scala last summer. I plan to learn some SML and Caml as well, and to brush up my (little) knowledge of Scheme. Well, a lot of plans (too ambitious?) but I hope I will find the time to learn at least the basics of FP during the next few years. What is important for me is how functional programming works and how / whether I can use it for some real projects. I have already developed small tools in Haskell. In spite of my strong interest for FP, I find it difficult to understand why functional programming constructs are being added to languages like C#, Java, C++, and so on. As a developer interested in FP, I find it more natural to use, say, Scala or Haskell, instead of waiting for the next FP feature to be added to my favourite non-FP language. In other words, why would I want to have only some FP in my originally non-FP language instead of looking for a language that has a better support for FP? For example, why should I be interested to have lambdas in Java if I can switch to Scala where I have much more FP concepts and access all the Java libraries anyway? Similarly: why do some FP in C# instead of using F# (to my knowledge, C# and F# can work together)? Java was designed to be OO. Fine. I can do OOP in Java (and I would like to keep using Java in that way). Scala was designed to support OOP + FP. Fine: I can use a mix of OOP and FP in Scala. Haskell was designed for FP: I can do FP in Haskell. If I need to tune the performance of a particular module, I can interface Haskell with some external routines in C. But why would I want to do OOP with just some basic FP in Java? So, my main point is: why are non-functional programming languages being extended with some functional concept? Shouldn't it be more comfortable (interesting, exciting, productive) to program in a language that has been designed from the very beginning to be functional or multi-paradigm? Don't different programming paradigms integrate better in a language that was designed for it than in a language in which one paradigm was only added later? The first explanation I could think of is that, since FP is a new concept (it isn't new at all, but it is new for many developers), it needs to be introduced gradually. However, I remember my switch from imperative to OOP: when I started to program in C++ (coming from Pascal and C) I really had to rethink the way in which I was coding, and to do it pretty fast. It was not gradual. So, this does not seem to be a good explanation to me. Or can it be that many non-FP programmers are not really interested in understanding and using functional programming, but they find it practically convenient to adopt certain FP-idioms in their non-FP language? IMPORTANT NOTE Just in case (because I have seen several language wars on this site): I mentioned the languages I know better, this question is in no way meant to start comparisons between different programming languages to decide which is better / worse. Also, I am not interested in a comparison of OOP versus FP (pros and cons). The point I am interested in is to understand why FP is being introduced one bit at a time into existing languages that were not designed for it even though there exist languages that were / are specifically designed to support FP.

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Bancassurers Seek IT Solutions to Support Distribution Model

  - by [email protected]

  Oracle Insurance's director of marketing for EMEA, John Sinclair, attended the third annual Bancassurance Forum in Vienna last month. He reports that the outlook for bancassurance in EMEA remains positive, despite changing market conditions that have led a number of bancassurers to re-examine their business models. Vienna is at the crossroads between mature Western European markets, where bancassurance is now an established best practice, and more recently tapped Eastern European markets that offer the greatest growth potential. Attendance at the Bancassurance Forum was good, with 87 bancassurance attendees, most in very senior positions in the industry. The conference provided the chance for a lively discussion among bancassurers looking to keep abreast of the latest trends in one of Europe's most successful distribution models for insurance. Even under normal business conditions, there is a great demand for best practice sharing within the industry as there is no standard formula for success.  Each company has to chart its own course and choose the strategies for sales, products development and the structure of ownership that make sense for their business, and as soon as they get it right bancassurers need to adapt the mix to keep up with ever changing regulations, completion and economic conditions.  To optimize the overall relationship between banking and insurance for mutual benefit, a balance needs to be struck between potentially conflicting interests. The banking side of the house is looking for greater wallet share from its customers and the ability to increase profitability by bundling insurance products with higher margins - especially in light of the recent economic crisis, where margins for traditional banking products are low and completion high. The insurance side of the house seeks access to new customers through a complementary distribution channel that is efficient and cost effective. To make the relationship work, it is important that both sides of the same house forge strategic and long term relationships - irrespective of whether the underlying business model is supported by a distribution agreement, cross-ownership or other forms of capital structure. However, this third annual conference was not held under normal business conditions. The conference took place in challenging, yet interesting times. ING's forced spinoff of its insurance operations under pressure by the EU Commission and the troubling losses suffered by Allianz as a result of the Dresdner bank sale were fresh in everyone's mind. One year after markets crashed, there is now enough hindsight to better understand the implications for bancassurance and best practices that are emerging to deal with them. The loan-driven business that has been crucial to bancassurance up till now evaporated during the crisis, leaving bancassurers grappling with how to change their overall strategy from a loan-driven to a more diversified model.  Attendees came to the conference to learn what strategies were working - not only to cope with the market shift, but to take advantage of it as markets pick up. Over the course of 14 customer case studies and numerous analyst presentations, topical issues ranging from getting the business model right to the impact on capital structuring of Solvency II were debated openly. Many speakers alluded to the need to specifically design insurance products with the banking distribution channel in mind, which brings with it specific requirements such as a high degree of standardization to achieve efficiency and reduce training costs. Moreover, products must be engineered to suit end consumers who consider banks a one-stop shop. The importance of IT to the successful implementation of bancassurance strategies was a theme that surfaced regularly throughout the conference.  The cross-selling opportunity - that will ultimately determine the success or failure of any bancassurance model - can only be fully realized through a flexible IT architecture that enables banking and insurance processes to be integrated and presented to front-line staff through a common interface. However, the reality is that most bancassurers have legacy IT systems, which constrain the businesses' ability to implement new strategies to maintaining competitiveness in turbulent times. My colleague Glenn Lottering, who chaired the conference, believes that the primary opportunities for bancassurers to extract value from their IT infrastructure investments lie in distribution management, risk management with the advent of Solvency II, and achieving operational excellence. "Oracle is ideally suited to meet the needs of bancassurance," Glenn noted, "supplying market-leading software for both banking and insurance. Oracle provides adaptive systems that let customers easily integrate hybrid business processes from both worlds while leveraging existing IT infrastructure." Overall, the consensus at the conference was that the outlook for bancassurance in EMEA remains positive, despite changing market conditions that have led a number of bancassurers to re-examine their business models. John Sinclair is marketing director for Oracle Insurance in EMEA. He has more than 20 years of experience in insurance and financial services.    

  Read the article

• BizTalk Server Monitoring &ndash; SharePoint Web Part

  - by SURESH GIRIRAJAN

  I have been worked with customers using BizTalk as shared infrastructure in the enterprise, where we have two or more BizTalk apps running on it for different Business groups. Also these customers are not using BizTalk ESB portal even though they are using BizTalk ESB exception framework. So main issue with all these Business groups are they don’t have visibility into the BizTalk apps running in prod, even though they are using SCOM and other monitoring stuff in place. So I am trying to address few issues I am going to list below and how I try to mitigate them, first one on the list is how to get visibility into prod, how to provision those access to the BizTalk resources with minimal activity and how can we take advantage of the resources we have today. So I was working on creating REST data services for BizTalk RFID a year ago and available on codeplex. I thought to extend that idea to take advantage of BizTalk Data Services available in codeplex. I extended the BizTalk data services I will upload the updated service soon. So let me start thru how my solution works, so first step I am using the BizTalk data service (REST service) which expose most of the BizTalk artifacts as resources such as Applications, Orchestrations, Send ports, Receive ports, Host instances and In process instances etc. BizTalk Server Monitoring – SharePoint Web Part I am hosting the BizTalk data service in IIS with application pool configured to run under BizTalk administrator credentials. So with this setup I am making the service to make accessible anonymous. Next step of this solution I have created a SharePoint Visual web part which consumes the BizTalk data service and display all the BizTalk Application and Platform settings in read only mode. Even though BizTalk data services offers to browse resources as well perform actions like starting, stopping Orchestrations, Send ports, Receive locations, Host instances etc. Host Instances BizTalk Applications BizTalk Running / Suspended Instances So having this BizTalk Monitoring SharePoint web part, will be added to the SharePoint. This eliminates the need for granting access to the BizTalk users explicitly, so when you have BizTalk contractor or BizTalk application user need to have access to the BizTalk environment all the need is have access to the SharePoint website. You can configure the web part point to different end point based on your environment. I am making this as read only as part of this to make easier for the users and in terms of provisioning. This removes the dependency of BizTalk admin at least for viewing the BizTalk application status and errors etc. If we need to make any changes to the BizTalk application then its application owner responsibility to co-ordinate with BizTalk admins. There are options like BizTalk ESB portal, BizTalk 360 etc… but this one of the approach to reduce number of steps required to give access to BizTalk application users and also to maximize the resource we have in enterprise today. Also you can expose this data service thru Azure Service Bus and access from other apps like mobile devices or create a web site hosted in Azure etc. One last thing I have tested only with BizTalk Server 2010 on x64 VM only, but it should work on other version. I will try to upload the code shortly with instructions how to setup etc.… I welcome thoughts and suggestions… Hope this helps….

  Read the article

• F# WPF Form &ndash; the basics

  - by MarkPearl

  I was listening to Dot Net Rocks show #560 about F# and during the podcast Richard Campbell brought up a good point with regards to F# and a GUI. In essence what I understood his point to be was that until one could write an end to end application in F#, it would be a hard sell to developers to take it on. In part I agree with him, while I am beginning to really enjoy learning F#, I can’t but help feel that I would be a lot further into the language if I could do my Windows Forms like I do in C# or VB.NET for the simple reason that in “playing” applications I spend the majority of the time in the UI layer… So I have been keeping my eye out for some examples of creating a WPF form in a F# project and came across Tim’s F# Twitter Stream Sample, which had exactly this…. of course he actually had a bit more than a basic form… but it was enough for me to scrap the insides and glean what I needed. So today I am going to make just the very basic WPF form with all the goodness of a XAML window. Getting Started First thing we need to do is create a new solution with a blank F# application project – I have made mine called FSharpWPF. Once you have the project created you will need to change the project type from a Console Application to a Windows Application. You do this by right clicking on the project file and going to its properties… Once that is done you will need to add the appropriate references. You do this by right clicking on the References in the Solution Explorer and clicking “Add Reference'”. You should add the appropriate .Net references below for WPF & XAMl to work. Once these references are added you then need to add your XAML file to the project. You can do this by adding a new item to the project of type xml and simply changing the file extension from xml to xaml. Once the xaml file has been added to the project you will need to add valid window XAML. Example of a very basic xaml file is shown below… <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="F# WPF WPF Form" Height="350" Width="525"> <Grid> </Grid> </Window> Once your xaml file is done… you need to set the build action of the xaml file from “None” to “Resource” as depicted in the picture below. If you do not set this you will get an IOException error when running the completed project with a message along the lines of “Cannot locate resource ‘window.xaml’ You then need to tie everything up by putting the correct F# code in the Program.fs to load the xaml window. In the Program.fs put the following code… module Program open System open System.Collections.ObjectModel open System.IO open System.Windows open System.Windows.Controls open System.Windows.Markup [<STAThread>] [<EntryPoint>] let main(_) = let w = Application.LoadComponent(new System.Uri("/FSharpWPF;component/Window.xaml", System.UriKind.Relative)) :?> Window (new Application()).Run(w) Once all this is done you should be able to build and run your project. What you have done is created a WPF based window inside a FSharp project. It should look something like below…   Nothing to exciting, but sufficient to illustrate the very basic WPF form in F#. Hopefully in future posts I will build on this to expose button events etc.

  Read the article

• What Banks Can Learn From An English Teacher’s Advice

  - by Gaurav H

  The earliest definitions I learnt at school pertained to nouns and verbs. Nouns, my teacher said, indicated names of people, things and places. Verbs, the stern lady said, are “action words”. They indicated motion.  The idea for this blog filtered in when I applied these definitions to the entity I most often deal with for my personal financial needs, and think about or relate to from a professional standpoint: ‘a bank’. Noun? It certainly is. At least that’s how I’d had it figured in my head. It used to be a place I visited to get my financial business done. It is the name of an entity I have a business relationship with. But, taking a closer look at how ‘the bank’ has evolved recently makes me wonder. Is it not after all acquiring some shades of a verb? For one, it’s in motion if I consider my mobile device with its financial apps. For another, it’s in ‘quasi-action’ if I consider a highly interactive virtual bank. The point I’m driving at is not semantic. But the words we use and the way we use them are revealing, and can offer tremendous insights into our existing mindsets. I think the same applies to businesses. Banks that first began examining and deconstructing their cherished ‘definitions’ or business models (nouns) were the earliest to adapt, change, and reinvent (verbs). They were able to waltz past disintermediation threats. Though rooted in a ‘brick and mortar’ heritage, their thinking and infrastructure were flexible enough for the digital era. While their physical premises imposed restrictions—opening hours, transaction hours, appointments, waiting time, overcrowding, processing time, clearing time, etc,—their thinking did not. They innovated. Across traditional and new-era channels, they easily slipped in customer services of a differentiated kind: spot loans, deposits with idle account balances, convenient mortgages with multiple liens or collateral, and instant payment options.I believe the most successful banks are those that fit into the rhythm of their customers’ lives rather than forcing their customers to fit into theirs. It was true for banks that existed before the Internet era; it’s true for banks now. I look no further than UBANK, JIBUN and HBOS Germany to make my point. They are resounding successes because they are not trapped in their own definitions of ‘a bank’. They walk with their customers, rather than waiting for their clients to walk-in for services.Back to my English teacher. She once advised me to use more verbs in my composition. Readers relate better to “action” she said. Banks too can profit from her advice. To succeed, they need to interact more. And remain flexible enough to interact with their customers. Sonny Singh is Senior Vice President  and General Manager of the Oracle Financial Services Global Business Unit. He can be reached at sonny.singh AT oracle.com or on twitter @sonnyhsingh

  Read the article

• Cross platform application revolution

  - by anirudha

  Every developer know that if they make a windows application that they work only on windows. that’s a small pity thing we all know. this is a lose point for windows application who make developer thing small means only for windows and other only for mac. this is a big point behind success of web because who purchase a operating system if they want to use a application on other platform. why they purchase when they can’t try them. that’s a thing better in Web means IE 6 no problem IE 6 to IE 8 chrome to chrome 8 Firefox to Firefox 3.6.13 even that’s beta no problem the good website is shown as same as other browser. some minor difference may be can see. the cross platform application development thinking is much big then making a application who is only for some audience. the difference between audience make by OS what they use Windows or mac. if they use mac they can’t use this they use windows they can’t use this. Web for Everyone starting from a children to grandfather. male and female Everyone can use internet.no worrying what you have even you have Windows or mac , any browser even as silly IE 6. the cross platform have a good thing that “People”. everyone can use them without a problem that. just like some time problem come in windows that “some component is missing click here to get them” , you can’t use this [apps] software because you have windows sp1 , sp2  sp3. you need to install this first before this. this stupidity mainly comes in Microsoft software. in last year i found a issue on WPI that they force user to install another software when they get them from WPI. ex:- you need to install Visual studio 2008 before installing Visual studio 2010 express. are anyone tell me why user get old version 2008 when they get latest and express version. i never try again their to check the issue is solved or not. a another thing is you can’t get IE 9 on windows XP version. in that’case don’t thing and worrying about them because Firefox and Chrome is much better. the stupidity from Microsoft is too much. they never told you about Firebug even sometime they discuss about damage tool in IE they called them developer tool because they are Microsoft and they only thing how they can market their products. you need to install many thing without any reason such as many SQL server component even you use other RDBMS. you can’t say no to them because you need a tool and tool require a useless component called SQL server. i never found any software force me to install this for this and this for this before install me. that’s another good thing in WEB that no thing require i means you not need to install dotnet framework 4 before enjoy facebook or twitter. may be you found out that Microsoft's fail project Window planet force you to get silverlight before going their. i never hear about them. some month ago my friend talked to me about them i found nothing better their. Wha’t user do when facebook force user to install silverlight or adobe flash or may be Microsoft dotnet framework 4. if you not install them facebook tell  you bye bye tata ! never come here before installing Microsoft dotnet framework 4. the door is open for you after installing them not before. the story is same as “ tell me sorry before coming in home” as mother says to their child when they do something wrong. the web never force you to do something for them. sometime they allow you to use other website account their that’s very fast login for you. because they know the importance of your time.

  Read the article

• Building vs. Buying a Master Data Management Solution

  - by david.butler(at)oracle.com

  Many organizations prefer to build their own MDM solutions. The argument is that they know their data quality issues and their data better than anyone. Plus a focused solution will cost less in the long run then a vendor supplied general purpose product. This is not unreasonable if you think of MDM as a point solution for a particular data quality problem. But this approach carries significant risk. We now know that organizations achieve significant competitive advantages when they deploy MDM as a strategic enterprise wide solution: with the most common best practice being to deploy a tactical MDM solution and grow it into a full information architecture. A build your own approach most certainly will not scale to a larger architecture unless it is done correctly with the larger solution in mind. It is possible to build a home grown point MDM solution in such a way that it will dovetail into broader MDM architectures. A very good place to start is to use the same basic technologies that Oracle uses to build its own MDM solutions. Start with the Oracle 11g database to create a flexible, extensible and open data model to hold the master data and all needed attributes. The Oracle database is the most flexible, highly available and scalable database system on the market. With its Real Application Clusters (RAC) it can even support the mixed OLTP and BI workloads that represent typical MDM data access profiles. Use Oracle Data Integration (ODI) for batch data movement between applications, MDM data stores, and the BI layer. Use Oracle Golden Gate for more real-time data movement. Use Oracle's SOA Suite for application integration with its: BPEL Process Manager to orchestrate MDM connections to business processes; Identity Management for managing users; WS Manager for managing web services; Business Intelligence Enterprise Edition for analytics; and JDeveloper for creating or extending the MDM management application. Oracle utilizes these technologies to build its MDM Hubs.  Customers who build their own MDM solution using these components will easily migrate to Oracle provided MDM solutions when the home grown solution runs out of gas. But, even with a full stack of open flexible MDM technologies, creating a robust MDM application can be a daunting task. For example, a basic MDM solution will need: a set of data access methods that support master data as a service as well as direct real time access as well as batch loads and extracts; a data migration service for initial loads and periodic updates; a metadata management capability for items such as business entity matrixed relationships and hierarchies; a source system management capability to fully cross-reference business objects and to satisfy seemingly conflicting data ownership requirements; a data quality function that can find and eliminate duplicate data while insuring correct data attribute survivorship; a set of data quality functions that can manage structured and unstructured data; a data quality interface to assist with preventing new errors from entering the system even when data entry is outside the MDM application itself; a continuing data cleansing function to keep the data up to date; an internal triggering mechanism to create and deploy change information to all connected systems; a comprehensive role based data security system to control and monitor data access, update rights, and maintain change history; a flexible business rules engine for managing master data processes such as privacy and data movement; a user interface to support casual users and data stewards; a business intelligence structure to support profiling, compliance, and business performance indicators; and an analytical foundation for directly analyzing master data. Oracle's pre-built MDM Hub solutions are full-featured 3-tier Internet applications designed to participate in the full Oracle technology stack or to run independently in other open IT SOA environments. Building MDM solutions from scratch can take years. Oracle's pre-built MDM solutions can bring quality data to the enterprise in a matter of months. But if you must build, at lease build with the world's best technology stack in a way that simplifies the eventual upgrade to Oracle MDM and to the full enterprise wide information architecture that it enables.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >