Search Results

Search found 7850 results on 314 pages for 'except'.

Page 194/314 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Modem doesn't seem to pass internet connection to router

  - by Vian Esterhuizen

  I was supplied a Cisco DPC3825 modem by my ISP and use a Cisco E4200 as my main router. Today the Internet just stopped working, just out of the blue, I can't think of anything that would have triggered it. It's been working pretty good for the past month except for a few random blips here and there. After some trouble shooting I realized that a direct wired connection to the modem would get me Internet access but if I was wired to the router as I was before I would have no connection. Assuming it was router I connected a TP-Link WR841N but it had the exact same problem. Also, connecting to the router via Wi-Fi from multiple devices will connect me to the router but I still can't get access to the Internet. From these test, it seems that the modem just won't send Internet through to the router but is clearly connecting and able to directly connect to my PC. What I've Tried A full reset and factory reset on the E4200 A full reset on the modem (but I believe my ISP has remote access to the modem because the passwords and so on are always set back). My ISP has remotely reconfigured the modem What I Should Try What else can I try? What should I do to try to narrow down the issue? Can you figure out what the problem might be based on this information?

  Read the article

• Advice needed: ADSL and VPN for a small company

  - by Saajid Ismail

  Hi. I need advice on purchasing an ADSL modem/router for a small company. At the moment, we are using the iBurst Wireless service for internet connectivity. I have the iBurst desktop modem, which connects to my Netgear WNR2000 router via ethernet. I am using the Netgear WNR2000 to deploy a wireless network as well. I have also set up a VPN using Windows Server 2003, and enabled the VPN Passthrough settings on the Netgear router. I am able to connect to the office network remotely without difficulty. However the problem that I've read is that the Netgear WNR2000 only supports VPN passthrough for a single session. This is simply not good enough. I need to be able to support at least 3 concurrent VPN connections immediately, and up to 5 in the near future. Now I am cancelling my iBurst Wireless service and have just got my ADSL line installed. I have to purchase an ADSL modem, and now is a good time to think of future proofing my investment. I need a good ADSL modem, that will allow me to support at least 5 concurrent VPN connections, or more, without breaking the bank. My budget is about 150-200 USD. I believe that my current Netgear WNR2000 router will be useless, except maybe to extend my wireless network in the future by a bit. Is there a solution where I can still use my Netgear WNR2000 for WiFi, for e.g., by connecting a cheaper non-WiFi ADSL modem to the Netgear router? If not, then which WiFi-enabled ADSL modem/router that supports at least 5 VPN passthroughs can you recommend? To sum it up, I need an ADSL modem/router that is: ADSL & ADSL2+ compatible has built-in 802.11n 270/300mbps WiFi (if having this feature doesn't push the price up too much) supports at least 5 VPN connections using VPN passthrough EDIT: Answer 2.10 in the following FAQ has me a bit worried - What is VPN/multiple VPN Pass-through?

  Read the article

• mysql master-master setup as a way to simply master-slave promotion

  - by Chris Go

  I'm trying to see if the following plan is viable. Goal here is to be able to do HA (uptime) and not necessarily for load -- writes are fine on one MySQL 5.5 server (with innodb) but not really possible when the database is down. Currently, I have a master-slave replication setup which works fine except it doesn't have automatic promotion (obviously). what I am planning on doing is setup master-master replication to possibly do this "automatic promotion" using Amazon Route 53 DNS Failover (Health checks). What I am trying to avoid is to NOT have to do the auto-increment trick because the "business folks" got used to the auto-incrementing PK as consecutive numbers (yeah, I know this is bad but data is from 2004). So, setup the master-master replication WITHOUT the auto-increment collision prevention bit. The primary master is db1.domain.com and secondary master is db2.domain.com In Amazon Route 53, setup DNS Failover record for db.domain.com - primary failover is db1.domain.com - with a TCP healthcheck on IP address port 3306 - secondary failover is db2.domain.com - with a TCP healthcheck on IP address port 3306 Most of the time (99%), unless tcp://db1.domain.com:3306 is dead, db1.domain.com will be served up on DNS hits to db.domain.com. In fact, hopefully this is 100%. The possible downsides of this is the loss of a primary key (collision) and I think I am OK with losing one order. We are a low data volume B2B business and can just call our client up if this occurs (like an order disappearing). Does this sound like a good plan? Then I will also run another slave replication on db1.domain.com as "master" to a slave-db1.domain.com -- not sure why, maybe for heavy SELECTs?

  Read the article

• Thunderbird doesn't show folders on a new Dovecot install

  - by Zoran Zaric

  Hey, I set up a new mailserver with postfix and Dovecot some days ago, everything is working except for Thunderbird not showing any folders. Evolution shows me all folders. I migrated from a Courier install using imapsync. In the filesystem the folders don't have a INBOX in their name, so the tho folders ar called .Folder 1 not .INBOX.Folder 1. This is the output of dovecot -n: # 1.0.10: /etc/dovecot/dovecot.conf Warning: mail_extra_groups setting was often used insecurely so it is now deprecated, use mail_access_groups or mail_privileged_group instead base_dir: /var/run/dovecot/ log_timestamp: “%Y-%m-%d %H:%M:%S ” protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 1001 last_valid_uid: 1001 mail_extra_groups: vmail mail_access_groups: vmail mail_location: maildir:/var/vmail/%d/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail Thanks!

  Read the article

• RDS, RDWeb, and RemoteApp: How to use public certificate for launching apps on session host?

  - by Bret Fisher

  Question: How do i tell RDWeb to launch apps from remote.domain.com rather then host.internaldomain.local? Environment: Existing org with AD forest. New single Server 2012 running all Remote Desktop Services roles for session host. Used the new 2012 wizard to setup "QuickSessionCollection" with roles: RD Session Host RD Connection Broker RD Gateway RD Web Access RD Licensing Everything works with self-signed cert, but we want to prevent those. The users are potentially non-domain machines so sticking a private root cert for on their machines isn't an option. Every part of the solution needs to use public cert. Added public remote.domain.com cert to all roles using Server Manager GUI: RD Connection Broker - Enable Single Sign On RD Connection Broker - Publishing RD Web Access RD Gateway So now everything works beautifully except the last step: user logs into https://remote.domain.com user clicks a app icon, which in background downloads a .rdp file that is signed by remote.domain.com. .rdp is set to use RD Gateway, which is remote.domain.com .rdp says app is hosted on internal host.internaldomain.local, which doesn't match the RDP-tcp TLS cert of remote.domain.com, and pops a warning. It's this last step that I'd like to fix. Is there a config option in PowerShell, WMI, or .config to tell RDWeb/RemoteApp to use remote.domain.com for all published apps so the TLS cert for RDP matches what the Session Host is using? NOTE: This question talks about this issue, and this answer mentions how you might fix it in 2008, but that GUI doesn't exist in 2012 for RemoteApp, and I can't find a PowerShell setting for it. NOTE: Here's a screenshot of the setting in 2008R2 that I need to change. It tells RemoteApp what to use for the Session Host server name. How can I set that in 2012?

  Read the article

• yum install php-devel amongst other commands returning problems

  - by user3791722

  I run yum install php-devel and it returns this. Typically I'd just run it with --skip-broken, but when I do, it still doesn't do the trick. Available: php-common-5.3.3-22.el6.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-22.el6 Available: php-common-5.3.3-23.el6_4.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-23.el6_4 Available: php-common-5.3.3-26.el6.x86_64 (rhel-x86_64-server-6) php-common(x86-64) = 5.3.3-26.el6 Available: php54w-common-5.4.29-2.w6.x86_64 (webtatic) php-common(x86-64) = 5.4.29-2.w6 Available: php54w-common-5.4.30-1.w6.x86_64 (webtatic) php-common(x86-64) = 5.4.30-1.w6 Available: php55w-common-5.5.13-2.w6.x86_64 (webtatic) php-common(x86-64) = 5.5.13-2.w6 Installing: php55w-common-5.5.14-1.w6.x86_64 (webtatic) php-common(x86-64) = 5.5.14-1.w6 You could try using --skip-broken to work around the problem When run with --skip-broken it returns this at the end: Packages skipped because of dependency problems: autoconf-2.63-5.1.el6.noarch from rhel-x86_64-server-6 automake-1.11.1-4.el6.noarch from rhel-x86_64-server-6 pcre-devel-7.8-6.el6.x86_64 from rhel-x86_64-server-6 php-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-cli-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-common-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-mysql-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-pdo-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php-soap-5.3.3-27.el6_5.1.x86_64 from rhel-x86_64-server-6 php55w-cli-5.5.14-1.w6.x86_64 from webtatic php55w-common-5.5.14-1.w6.x86_64 from webtatic php55w-devel-5.5.14-1.w6.x86_64 from webtatic This problem has arisen with a few other similar commands when installing something related to php, except I've just done without them. I need to install this for something I'm trying to do. I do remember upgrading to PHP 5.4 and our entire infrastructure coming down due to it requiring PHP 5.3, so I downgraded as quick as possible to get everything back running and that may contribute to the issue. If you have any idea why this is happening and how I could get the package on the system while remaining on PHP 5.3, please let me know. Thanks.

  Read the article

• Redhat 5.5: Multi-thread process only uses 1 CPU of the available 8

  - by Tonny

  Weird situation: Redhat Enterprise 5.5 (stock install, no updates, x64) on a HP z800 workstation. (Dual Xeon 2,2 Ghz. 8 cores, 16 if you count Hyper-threading. RH sees 16 cores.) We have an application that can utilize 1, 2 or 4 threads for heavy calculations. Somehow all these threads run on the same core at 100% load (the other 15 cores are nearly idle) so there is absolutely no benefit from the extra threads. In fact there is a slight slowdown as the threads get in each others way on the single core. How do I get them to run on separate cores (if possible)? Application is 64 bit. Can't change anything about the software except changing the threads setting. Is there some obscure Linux setting I can try to change? (I'm a True64 and Aix guy. I use Linux, but have no in depth knowledge of the process scheduling on Linux.)

  Read the article

• SQL Server slow in production environment

  - by Lieven Cardoen

  I have a weird problem in a customer's production environment. I can't give any details on the infrastructure, except that SQL server runs on a virtual server. The data, log and filestream file are on another storage server (data and filestream together and log on a separate server). In our local Test environment, there's one particular query that executes with these durations: first we clear the cache 300ms (First time it takes longer, but from then on it's cached.) 20ms 15ms 17ms In the customer's production environment, the SQL Server is more powerful, these are the durations (I didn't have the rights to clear the cache. Will try this tomorrow). 2500ms 2600ms 2400ms The servers in the customer's production environment are more powerful but they do have virtual servers (we don't). What could be the cause... Not enough memory? Fragmentation? Physical storage? How would you tackle this performance problem? EDIT: Some people have asked me if the data set is equal and it is. I restored their database on our environment. It's true that this was the first thing I looked at. (@Everyone: I added the edit because it will be the first thing that many will think off).

  Read the article

• Embed album art in OGG through command line in linux

  - by teratomata

  I want to convert my music from flac to ogg, and currently oggenc does that perfectly except for album art. Metaflac can output album art, however there seems to be no command line tool to embed album art into ogg. MP3Tag and EasyTag are able to do it, and there is a specification for it here which calls for the image to be base64 encoded. However so far I have been unsuccessful in being able to take an image file, converting it to base64 and embedding it into an ogg file. If I take a base64 encoded image from an ogg file that already has the image embedded, I can easily embed it into another image using vorbiscomment: vorbiscomment -l withimage.ogg > textfile vorbiscomment -c textfile noimage.ogg My problem is taking something like a jpeg and converting it to base64. Currently I have: base64 --wrap=0 ./image.jpg Which gives me the image file converted to base64, using vorbiscomment and following the tagging rules, I can embed that into an ogg file like so: echo "METADATA_BLOCK_PICTURE=$(base64 --wrap=0 ./image.jpg)" > ./folder.txt vorbiscomment -c textfile noimage.ogg However this gives me an ogg whose image does not work properly. I noticed when comparing the base64 strings that all properly embedding pictures have a header line but all the base64 strings I generate are lacking this header. Further analysis of the header: od -c header.txt 0000000 \0 \0 \0 003 \0 \0 \0 \n i m a g e / j p 0000020 e g \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 \0 \0 \0 \0 \0 \0 \0 \0 035 332 0000052 Which follows the spec given above. Notice 003 corresponds to front cover and image/jpeg is the mime type. So finally, my question is, how can I base64 encode a file and generate this header along with it for embedding into an ogg file?

  Read the article

• Endian Destination NAT

  - by Ben Swinburne

  I have installed Endian Community Firewall 2.3 and am clearly misunderstanding/doing something wrong with it. I'm trying to create some destination NAT rules to allow incoming connections to various services within the network. Router - RED I/F - x.x.x.x Router - GREEN I/F - 192.168.11.253 ECF - RED I/F - 192.168.11.254/24 ECF - GREEN I/F - 192.168.12.254/24 Target server - 192.168.12.1 Please ignore the haphazard choice of subnets and addresses- I'm trying to quickly plop Endian into an existing network before a complete rework in 6-12 months so for now. Everything works except destination NAT, so outgoing connections are fine, the routes between the two subnets are OK etc. I want to create various incoming NATs but let's take for the sake of argument, SMTP port 25 from the Internet to Target server 192.168.12.1. I've tried almost every combination of options in the Destination NAT section to achieve this and clearly am doing something wrong. I suspect my confusion must be somewhere in the Access From and/or Target section. The rest seems OK Filter Policy = Allow Service = SMTP Protocol = TCP Port = 25 Translate to type = IP DNAT Policy = NAT Insert IP = 192.168.12.1 Port Range = 25 Enabled = Checked Position = First I can't work out what I'm doing wrong, or am I doing it right and it's just not working!? Any help would be greatly appreciated.

  Read the article

• How to configure Hyper-V failover cluster to live migrate when dynamic memory runs out?

  - by Matt Johnson

  Appologies in advance that this is not a direct programming question, but I have a feeling that the solution involves custom powershell scripts (maybe), so this is as good a place to ask as any. I maintain a website that has a large Hyper-V cluster for SQL Servers. We are using Windows 2008 R2 SP1, and the new "dynamic memory" feature. I've already ready reviewed the Best Practices Guide, and implemented it's suggested configuration. Everything works well, except that when SQL demand increases memory pressure to expand to more memory than is available on the physical machine, the memory status goes into the "Warning" state and stays there. I assume the hypervisor is using a swapfile on the host to fulfill the memory requirement, thus slowing the virtual machine down. When this happens, there are plenty of other nodes in the cluster that have available resources. I can live-migrate the virtual server over there and everything works, and the warnings go away. Now how can I automate this? I see no menu options in either Hyper-V or the Failover Cluster Manager for performing a migration or shutdown when dynamic memory goes into the warning state. Any ideas about how to script this, or monitor it and invoke the action directly, would be helpful. If the solution involves coding, powershell would be ideal, but I could envison this as a .Net Service that monitors for this state and kicks off the migration request. I just don't know what objects are involved in doing the monitoring or kicking off the live migration. Thanks in advance.

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Why did MAC-Adress Cloning Fix My Router?

  - by FranticPedantic

  I have a Belkin router, and about a year ago, I suddenly lost my internet connectivity from Comcast. The internet worked fine when I plugged it right into my laptop, so I just ignored it. When I moved to another apartmnet I eventually took the dive and called tech support. The tech told me to clone my MAC address which completely fixed the issue. Now I know what a MAC address is and I've read what MAC cloning is. What has bothered me since is that I don't see how this fixed the issue. As I have understood MAC address cloning, it has the router pretend it has the same MAC address as my computer. Here is why I don't understand why this fixes my issue: I have used several different computers with this router. Cloning the MAC address fixed it for ALL of my computers. The laptop I first used with my ISP was not the one that I eventually had connected when I cloned the address. Furthermore, I didn't have any problems for quite some time after I stopped using the first computer. It wasn't like the internet suddenly stopped working when I changed which laptop I was using Now it occurred to me that maybe there was some sort of expiration? Except... Which MAC address did it clone? It was just an option in the router administration page. Did it just pick whichever computer was connected to it? If my ISP still wanted the MAC of my first computer, how did some other computer's fix it? As mentioned earlier, why did this problem seemingly stem from nowhere? Anyway, I don't have any current problems so this is more just out of general curiosity. If anybody can explain it, it would be appreciated!

  Read the article

• Crash and Centos

  - by Jackob

  Hello guys and girls, I've a big problem it's the second time that my server crashed. I tried to check every thing and seems correct except this /var/log/messages: May 25 20:16:11 srv1 kernel: swap_free: Bad swap offset entry 00300000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 00080000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00340000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 000c0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a00000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00200000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00890000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 00080000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f00000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f90000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00980000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00980000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00820000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 000d0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a60000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a20000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 009a0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00170000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f20000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00b60000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a30000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00320000 May 25 20:16:47 srv1 kernel: swap_free: Bad swap offset entry 002c0000 May 25 20:16:47 srv1 kernel: Eeek! page_mapcount(page) went negative! (-1) What can be my problem? Thanks so much!

  Read the article

• Mail won't start up after migration to Mountain Lion Server

  - by Meltemi

  I'm not sure where to start. Our hard disk died on server running 10.6.8. Installed new disk. Followed Apple's migration instructions to 10.8.2. All services are operational except Mail. /var/log/mail.log Dec 6 17:52:17 [email protected] postfix/master[10370]: fatal: bind: private/smtp: Permission denied Dec 6 17:52:27 [email protected] postfix/master[10374]: fatal: bind: private/smtp: Permission denied Dec 6 17:52:37 [email protected] postfix/master[10376]: fatal: bind: private/smtp: Permission denied Dec 6 17:52:47 [email protected] postfix/master[10380]: fatal: bind: private/smtp: Permission denied Dec 6 17:52:57 [email protected] postfix/master[10382]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:07 [email protected] postfix/master[10392]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:17 [email protected] postfix/master[10394]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:27 [email protected] postfix/master[10398]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:38 [email protected] postfix/master[10400]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:48 [email protected] postfix/master[10404]: fatal: bind: private/smtp: Permission denied Dec 6 17:53:58 [email protected] postfix/master[10411]: fatal: bind: private/smtp: Permission denied Dec 6 17:54:08 [email protected] postfix/master[10421]: fatal: bind: private/smtp: Permission denied

  Read the article

• One host on a network can't connect to one other host

  - by Max Williams

  I'm on a local network with a few other people. On of the hosts is a virtual machine running in virtualbox on a mac, which has the ip address 192.168.0.35 (the VM that is, not the mac host). Everyone except one guy can connect (ie ping, ssh etc) to that machine. When that one guy tries to ping it he gets Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 which i understand is just how certain mac os's report an unreachable connection. He can ping all the other hosts on the network, ie our computers, and we can all ping the VM fine and connect to it with no problems etc. His ip is 192.168.0.17. I ssh'd onto his machine (as a new user 'anon') and saw the same problems. I can ssh onto the 192.168.0.35 VM as well. From there, i can ping other users, but when i ping the problem guy, it's unreachable that way round as well. He restarted his mac, and was fine for a while. Then, just stopped working again. He's got a different IP to before. Any ideas, anyone? Don't know enough about this stuff to even diagnose the problem. thanks, max

  Read the article

• How do I grant a database role execute permissions on a schema? What am I doing wrong?

  - by Lewray

  I am using SQL Server 2008 Express edition. I have created a Login , User, Role and Schema. I have mapped the user to the login, and assigned the role to the user. The schema contains a number of tables and stored procedures. I would like the Role to have execute permissions on the entire schema. I have tried granting execute permission through management studio and through entering the command in a query window. GRANT EXEC ON SCHEMA::schema_name TO role_name But When I connect to the database using SQL management studio (as the login I have created) firstly I cannot see the stored procedures, but more importantly I get a permission denied error when attempting to run them. The stored procedure in question does nothing except select data from a table within the same schema. I have tried creating the stored procedure with and without the line: WITH EXECUTE AS OWNER This doesn't make any difference. I suspect that I have made an error when creating my schema, or there is an ownership issue somewhere, but I am really struggling to get something working. The only way I have successfully managed to execute the stored procedures is by granting control permissions to the role as well as execute, but I don't believe this is the correct, secure way to proceed. Any suggestions/comments would be really appreciated. Thanks.

  Read the article

• How do I Setup Multiple Sites in HostGator Shared Hosting?

  - by cillosis

  I recently decided to consolidate all of my random projects into a single hosting account as it was starting to get very expensive to run each on an individual hosting plan. I purchased the HostGator Baby plan which allows hosting of multiple domains. You have to set it up with a root domain name which is fine (I used my portfolio domain name). As far as file structure, I wanted a folder for each site in /public_html so the structure looks like this: - public_html/ - myportfolio.com/ - ... my files ... - anothersite.com/ - ... my files ... - thirdsite.com/ - ... my files ... I setup add-on domains and pointed them to their respective folders which works fine. My problem is the root domain ex. myportfolio.com expects it's files to be contained at the root of /public_html rather than within it's folder I created. I setup a redirect to point requests for myportfolio.com to myportfolio.com/myportfolio.com/ which works initially except (at least in my WordPress installation) it still references it's root folder as public_html. TL;DR; What is the best way to go about setting up multiple site hosting in a shared hosting environment (i.e. I can't setup vhosts). Does anybody know of any tutorials or videos that walk through this more clearly? Thanks.

  Read the article

• Solaris 10 zlogin logs in, logs out immediately

  - by Spelevink

  On a SPARC v445 running Solaris 10 9/10, had to rebuild rpool and reattached the three existing mirrored zpools on the other existing disks, with their zfs filesystems and NG zones intact. The zones have been configured with zonecfg -z ZONENAME create etc. ... and are now online using zoneadm -z ZONENAME attach -U then simply booting after being in installed state, but I cannot zlogin to any of the zones except one. It shows that I am logged in, then a blank line, then immediately logged out again. When I try to login using zlogin -C ZONENAME I cannot; the error message is: May 15 15:43:46 <hostname> login: open_module: stat(/usr/lib/security/pam_mkhomedir.so.1) failed: no such file or directory. May 15 15:43:46 <hostname> login: load_modules: cannot open module /usr/lib/security/pam_mkhomedir.so.1 But /usr/lib/pam_mkhomedir.so.1 does not exist, and it does not exist on my other servers, but those zones are accessible using zlogin. I can only zlogin to the zones with zlogin -S ZONENAME. What to do next? Thank you.

  Read the article

• Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

  - by Madiyaan Damha

  I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running default ubuntu vnc server. I have another computer that has a resolution of about 1200x1024 that I use to vnc into the server (I use the default ubuntu vnc viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: 1) Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how windows media player or vlc scales down the window (and does some interpolation of pixels). 2) Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. 3) Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there. Thanks,

  Read the article

• problem booting crusty old windows XP

  - by Carson Myers

  I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

  Read the article

• Unable to access Windows share

  - by mbnoimi

  I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

  Read the article

• Windows 7 Backup - Does the "system image" include all the files on my drive?

  - by Vaccano

  I have a new Dell Laptop that I have setup the way I like it. I want to use Windows 7 to do a backup and then restore that backup on a different hard drive (solid state). When I setup the backup info (manually) for Windows 7 Backup there is a little checkbox at the the bottom that says: Include a system image of drives: RECOVERY, OS (C:) I can also select to backup all my data on the C: drive (the only hard drive I have anything on) as well as some libraries (which are on my C: drive so no point in selecting those). The question I have is, does Windows 7 Backup just somehow know what needs to be restored (ie program files and Windows and the registry ....? Or is it really making a full restorable copy of the C: drive? (If the later is true then I don't need select the C: drive to be "backed up" if I don't plan to access the files except by restoring them right? (Because the system image will already have it all.)) So, which way is it? What is saved in the System Image?

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• mod_proxy incorrect redirect behaviour

  - by Kevin Loney

  In chrome this configuration causes an infinite redirect loop and in every other browser I have tried a request for https://www.example.com/servlet/foo is resulting in a redirect to https://www.example.com/foo/ instead of https://www.example.com/servlet/foo/ however this only occurs when I do not include a trailing / at the end of the request url (i.e. http://www.flightboard.net/servlet/foo/ works just fine). <VirtualHost *:80> # ... RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} ^/servlet(/.*)?$ RewriteRule ^(.*)$ http://%{HTTP_HOST}$1 [R=301,L] </VirtualHost> <VirtualHost *:443> # ... ProxyPass /servlet/ ajp://localhost:8009/ ProxyPassReverse /servlet/ ajp://localhost:8009/ </VirtualHost> The virtual host on port 443 has no rewrite rules that could possibly causing the problem, the tomcat contexts being referenced do not send any redirects, and if I change the ProxyPass and ProxyPassReverse directives to: ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ everything works fine (except for the fact everything from www.example.com is being passed to the proxy which is not the behaviour I want). I'm fairly certain this is a problem with the way I have my proxy settings configured because I did log all the rewrite output coming from apache and it was all correct.

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >