Search Results

Search found 7992 results on 320 pages for 'hp power protector'.

Page 194/320 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Increase performance of Samsung 830 256GB SSD

  - by Robert Koritnik

  I have a Samsung 830 SSD in my notebook connected to a SATA interface. This is a rather old HP notebook nc8430 which means SATA is SATA I and not II or even III that disk supports. But SATA I still supports speeds up to 150MB/s so I expected at least double values as per image below. CrystalDiskMark shows rather slow performance: I've been using this SSD for over a year now and I would like to know what to do to make it blazingly fast as other reports say it should be? Edit As suggested I'm adding AS SSD screenshot of the test. And Samsung Magician's benchmark which is likely biased...

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  Hi, We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration fo the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 straems. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise no difference, even worst. So, what is the pupuse of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage? Please do the needful as soon as possible. Regards Balaji

  Read the article

• Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

  - by Brian Stinar

  I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• How to verify if a clean windows 7 install was done or an upgrade over vista was what the tech did?

  - by Melody

  I'd like to know if the install was truly done as a clean Windows 7 or If the windows 7 was installed over the vista as an upgrade - 32 bit and ultimate verstion? I noticed hp game stuff (wild tanget or something ) during an virus scan and it was not suppose to be in a clean install...so now I'm wondering how to verify what kind of install Really happened/ Any help? I'd appreaciate knowing how to know the difference, if I was led to believe something that was not true...I paid for a clean install. Did I get that or not is my concern Thank you so much Melody

  Read the article

• Regarding the battery of a new laptop [closed]

  - by Majed

  Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

  Read the article

• How to get pen input to draw?

  - by Cameron J

  I just got a crappy little Hyundai pen input module To use on a normal Windows 7 HP laptop, it works quite well with the Hyundai software, but that's in Chinese, and the input only stays on the screen for a second. When I try to use it in Paint, it just draws a dot, and switches back to an unclicked state, similarly, it's impossible to move a window. Is there ant way I can keep the click held down when the pen is touching the pad in order to draw, or is there any third party software anyone knows of that can do this?

  Read the article

• RGB to DVI adapter not working for Projector-to-PC

  - by user897052

  We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

  Read the article

• Help with proposed iSCSI SAN VMware implementation.

  - by obsidian

  We have four (with plans to grow to four more) Dell servers with 6 NICs. They are running VMware ESXi 4.1. We would like to connect all of them to an Openfiler iSCSI SAN via HP ProCurve 1810G switches. Based on the design below, is there anything I should be concerned about or anything unusual that I should look out for when making the iSCSI network configurations on the servers, switches and OpenFiler? Should I bond the connections on the servers or simply setup them up for failover? The primary goal is to maximize IOPS. Thanks in advance.

  Read the article

• Is a ext3 Linux filesystem byte order independent

  - by Lothar

  I have a good old HP-C3700 Workstation with PA-RISC CPU here that I would like to use as a subversion server for a very large repository. I just worry what happens if the workstation dies (everybody who knows this computer knows that it is running like an Abrams tank and unlikely to happen in the next decade). I'm using Debian Linux on this system. If the mainboard dies can I just plug the SCSI drive into a PC and read the files from a normal Intel Linux PC? Which software RAID levels would be safe?

  Read the article

• Scripted printer configuration changes

  - by David Steven

  I've got about a dozen Windows XP machines that I need to make a couple specific printer configuration changes to. The printer is "virtual" printer for an electronic delivery service. I'd like to not have to visit each machine individually. I already have the means to execute commands remotely on the machines, I just can't seem to find away to adjust these settings via command line or script. Specifically I need to be able to make the following changes: 1) As an admin user: - Device Settings - Font Substitution Table/Courier New - Change to "Courier" 2) As a specific* user: - Printer Preferences - Paper/Quality - Advanced - Change Graphic/Print Quality to "600 x 600" - Change Document Options/Printer Features/Graphics Mode to "HP-GL/2" *This change is a per user configuration, unless there's some way to make it once. In this situation I only really need it for a specific (different) user on each machine.

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• perfmon reporting higher IOPs than possible?

  - by BlueToast

  We created a monitoring report for IOPs on performance counters using Disk reads/sec and Disk writes/sec on four servers (physical boxes, no virtualization) that have 4x 15k 146GB SAS drives in RAID10 per server, set to check and record data every 1 second, and logged for 24 hours before stopping reports. These are the results we got: Server1 Maximum disk reads/sec: 4249.437 Maximum disk writes/sec: 4178.946 Server2 Maximum disk reads/sec: 2550.140 Maximum disk writes/sec: 5177.821 Server3 Maximum disk reads/sec: 1903.300 Maximum disk writes/sec: 5299.036 Server4 Maximum disk reads/sec: 8453.572 Maximum disk writes/sec: 11584.653 The average disk reads and writes per second were generally low. I.e. for one particular server it was like average 33 writes/sec, but when monitoring in real-time it would often spike up to several hundreds and also sometimes into the thousands. Could someone explain to me why these numbers are significantly higher than theoretical calculations assuming each drive can do 180 IOPs? Additional details (RAID card): HP Smart Array P410i, Total cache size of 1GB, Write cache is disabled, Array accelerator cache ratio is 25% read and 75% write

  Read the article

• Map mouse xbuttons to keypress?

  - by Will

  Hi, the utilities that come with my HP vector mouse are fairly basic. My old logitech G9, the best mouse ever made (except when it gets senile and starts having 'gaps') had a utility to map each of the buttons to a keypress, which I use in games, such as xbutton1 and 2 for run, etc. is there a utility, or a way, that I can map the 2 xbuttons on my new mouse so that they generate/simulate a keypress? I'm wondering if there are built in mappings in Windows that do this already, and its just a case of finding out what the keypresses are? thanks, Will

  Read the article

• Cannot enter BIOS due to broken screen

  - by gamer

  Lately my laptop(hp g42 247sb) screen is damaged, so I hook it up with a external monitor(LG something) and it works fine now. But the only annoying thing is I cannot navigate the BIOS menu for some tweaking because the BIOS not shown on the external monitor,instead, it only shown on the broken laptop screen, and it only output to my external monitor when windwos/os is loged-on. So, is there anyway I can force output during BIOS/BOOT/POST to my external monitor? Things I have done and didn't work: (1)Set my LG monitor as primary display on both window properties and Intel Graphics panel (2)Enter the bios (F10 key) and press the fn+F4 key(change display output). (3)Disable and uninstall my internal screen(broken laptop screen) using device manager and restart, but windows(bios?) install it back on log-on. Please help me!

  Read the article

• What's required to enable communication between two IP ranges located behind one switch?

  - by Eric3

  Within our co-located networking closet, we have control over two ranges of 254 addresses, e.g. 64.123.45.0/24 and 65.234.56.0/24. The problem is, if a host has only one IP address, or a block of addresses in only one range, it can't contact any of the addresses in the other subnet. All of our hosts use our hosting provider's respective gateway, e.g. 64.123.45.1 or 65.234.56.1 A host on the 64.123.45.0/24 range can contact the 65.234.56.1 gateway and vice-versa Everything in our closet is connected to an HP ProCurve 2810 (a Layer 2-only switch), which connects through a Juniper NetScreen-25 firewall to the outside world What can I do to enable communication between the two ranges? Is there some settings I can change, or do I need better networking equipment?

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

  - by Charles Long

  I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

  Read the article

• Compaq Q2009 monitor display Issues

  - by jasonco

  I have this compaq q2009 monitor 20' inches and I am having display issues. When I turn on the computer the image is displayed fine for a fraction of a second and then the display goes black. If I turn off the monitor and turn it on again the the same thing happens: the image is displayed for a fraction of a second and then goes black. This is odd. I've looked all over the web and I haven't found anything useful (not even in the HP website). So there is no "out of range" or "recommended resolution" message. It just displays and then goes black. I think the resolution is fine because it was working OK until recently and I haven't changed anything in that regard. Any help would be appreciated. Thanks.

  Read the article

• CA ArcServe r11.1 - have to switch Tape Drive Offline then Online to finish backup

  - by Richard

  Ill keep it brief, I have an HP Ultrium 1 in a server currently running CA ArcServe r11.1. I have 5 daily backup tapes, each of which are new. 3 of the 5 work fine without intervention but 2 of them stop at varying points through the backup asking for a new tape, even though that tape is not full. The way I have found around this is to switch the tape drive offline for 10 minutes then switch it back online, whilst the backup is still running. Has anyone ever seen this before? If so, any ideas how to permanently fix this. If all else fails just some pointers in the right direction. Thanks

  Read the article

• How to dispose of old rack-mount servers?

  - by Nic

  I have two old rack-mount servers lying around that I want to get rid of. One is a HP DL380 G2, the other is an IBM from the same era. Both machines boot up, but I don't have any harddrives for them, or any use for them. Worse yet, both machines appear to have been dropped at some point and the rail kits are bent out of shape and can't be removed, making them unusuable in a rack environment. I'd like to recycle them or dispose of them in some kind of safe manner, but don't really know what my options are. I'm in western Canada. Any suggestions? Update: If you found this question interesting, please consider visiting StackExchange Area 51 to support the proposal for a dedicated Recycling Q&A site.

  Read the article

• Optimal Configuration for five 300 GB 15K SAS Drives

  - by Bob

  I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

  Read the article

• Media center consumes all available memory when attempting to play music off of a server

  - by RCIX

  I have Windows 7 Ultimate, and recently, when i try to play a song off of my Twonky Media Server/Windows Media Connect (based on an HP WHS with an Atom), it plays choppily. When i open Resource Monitor, it shows that after ordering the music to play, memory usage rapidly spikes to consume most, if not all, of the available memory on my system (excluding a couple hundred megabytes in standby). Why does it do this and is there anything i can do to stop it? Edit: it happens when I attempt to browse the server's music, not just when i play music. Edit 2: the "ehshell" process is what consumes the memory, appears to me something specific to media center. Moreover, the ehshell process doesn't die in this case. Edit 3: It only happens when browsing my Twonky library, and not my Windows Media Connect.

  Read the article

• Why are USB 2.0 devices crashing my system?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >