Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 194/729 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• Problem with usb driver: ti_usb_3410_5052

  - by alschbpk

  I have problems with my USB driver. After adding my device (MSP430 USB-DEBUG-INTERFACE) it doesn't work. [ 60.476039] usb 2-2.1: new full speed USB device using uhci_hcd and address 8 [ 60.693959] ti_usb_3410_5052 2-2.1:1.0: TI USB 3410 1 port adapter converter detected [ 60.693981] ti_usb_3410_5052: probe of 2-2.1:1.0 failed with error -5 I try to do: modprobe ti_usb_3410_5052 No changes. It's Linux Linux ubuntu 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux I hope someone can help me.

  Read the article

• Has anyone tried to DIY his own router?

  - by router

  Can someone provide all necessary components to assemble a router? Especially,what's the component to make it programable? Seems google doesn't give such information . UPDATE I'm not gonna use a computer as router,definitely perfer an embeded device,but what's the component list of the device?

  Read the article

• Which twitter client can synchronize unread tweets?

  - by Tom Burger

  Right now I'm forced to read all the tweets in a single client on a single device (TweetDeck on my Android phone). If I would switch to another device and/or client, I would need to search for the last unread tweet, which is sometimes complicated (too many tweets). So, the question: Is there a client who can keep the status (read/unread) on tweets across multiple devices? My target systems would be now Android and MS Windows, but also Linux might be handy.

  Read the article

• How can I login (send text) with minicom?

  - by Travis

  I am attempting to login from a Linux client to a set top box running Linux via a USB to serial cable. When I power on the device, I can see the init messages scroll past, and I get to the login prompt, like this: (none) login: but I cannot login. The cursor stops flashing as if it is receiving input, but there is no response. My serial port setup is: Device: /dev/ttyUSB0 Bps: 115200 8N1 Hardware Flow Control: Yes Software Flow Control: No Any help would be greatly appreciated!

  Read the article

• USB devices don't work after restoring from Stand By

  - by Steve

  Hi. I'm running Windows XP SP3 on a NEC Versa L1100 laptop. If I wake my laptop up from Stand By, no attached USB devices will function. Device Manager shows all USB entries to be working properly. There is an option to "Allow the computer to turn off this device to save power" in the Power Management properties of USB entries. Is this causing the issue or something else? I have the latest drivers for my motherboard installed.

  Read the article

• How Spanning Tree Protocol detects Loops

  - by AMIT

  For last few days I've been reading about Spanning Tree Protocol ,L2 protocol and understood how it prevents loop in network ,various steps in STP but one thing i wanted to know how STP actually detects the loops in network so that it can prevent it.Somewhere I read STP uses BPDU as probe and detects loops I mean how it happen is when switch send a BPDU with Destination Address as multicast and receive same BPDU again mean there is loop in network . But is it how STP detects loops in network?

  Read the article

• Galaxy Tab 3 producing continuous LightSensor error in LogCat

  - by Richard Tingle

  I am using a Galaxy Tab 3 as a test device for writing an android app. As such I'm interested in the output of the LogCat which is being filled with these error level messages. The device itself appears to work correctly, apps which rely on the light sensor correctly respond to it and the number in the error itself goes down if the light sensor is obscured. If I wasn't using it to develop apps I wouldn't even be aware of the issue but I believe it is an issue with the device itself not my app: simply plugging the tab 3 into the computer and using Eclipse - ADT to look at the LogCat without any app running leads to these errors being shown. I know I could filter the LogCat to ignore these errors but inconvenience aside; they concern me. A sample of the log cat is below (it generates errors continuously). This is on verbose so it includes some debug level (D/) messages as well as the error level messages (E/). How can I correct the device to no longer generate these errors. 06-11 10:08:45.789: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:45.992: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.195: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.398: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.601: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:46.804: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.007: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.210: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.414: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.617: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:47.820: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.023: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.039: D/dalvikvm(15201): GC_CONCURRENT freed 1947K, 17% free 16973K/20359K, paused 13ms+13ms, total 50ms 06-11 10:08:48.226: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:48.429: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:48.632: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:48.632: D/STATUSBAR-NetworkController(472): refreshSignalCluster: data=0 bt=false 06-11 10:08:48.835: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.039: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.242: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.445: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13 06-11 10:08:49.632: D/STATUSBAR-NetworkController(472): refreshSignalCluster: data=0 bt=false 06-11 10:08:49.648: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 14 06-11 10:08:49.851: E/LightSensor(377): LightSensor::readEvents mPendingEvent.light = 13

  Read the article

• Automatically copy files to USB drive when connected

  - by Daphna

  I am looking for a solution for copying all the files from a specific directory on the hard drive, to a specific directory on a USB memory device, once this device is connected. I have a program that downloads podcast episodes for me. I would like these files to be automatically moved (or at least copied) to my mp3 player once I connect it to the computer. I have both windows xp and linux machines, so a solution for any of them will work for me.

  Read the article

• Cheap NAS for connecting a USB drive to the network

  - by olaeld

  I am looking for a cheap way of hooking up a USB drive to the LAN. This could be a router with a USB port, or possibly a more regular NAS device with a USB port. I am hoping to find something below $200. But if there is a device with "magical properties" I may be interested to hear about it anyway.

  Read the article

• Windows 7 immediately disconnects a USB drive

  - by Daniel Saner

  I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

  Read the article

• What is the significance of having the correct hostname for a cloud server in the control panel of the hosting company

  - by Logo

  What could be a problem that could arise if i do not have the correct hostname as my device name for the cloud server in a control panel of my hosting company basically the device name is supposedly the hostname when i created the cloud server they ensured this was my hostname for my new cloud server. but it looks like they will not allow me to use a domain name that is all digits. currently my host name in the cloud server itself is a domain name that is all digits.

  Read the article

• USB 3.0 + eSATA docking station for 2,5" (and optionally. 3,5") SATA drives [closed]

  - by AnNaSF

  I am looking for a USB 3.0 + eSATA docking station for 2,5" (and optionally. 3,5") SATA drives in order to easily connect some of my (formerly internally used) drives to me laptop which is equipped with an eSATA port. I am currently tending to buy this one: http://www.amazon.de/Uspeed-Superspeed-Externe-Festplatten-Chipsets/dp/B0087B9NE8/ Anyone any experiences with this device? Anyone possessing technically equivalent device which he/she can recommend? Thanks a lot!

  Read the article

• Running resize2fs on /

  - by user42363

  I'm trying to resize an ext4 filesystem on a Fedora 11 box. Using fsdisk and lvm, I was able to grow the partition and logical volume containing the filesystem. When I try to run resize2fs on the device containing the filesystem (/dev/sda2 in this case), I get: "Device or resource busy while trying to open /dev/sda2, Couldn't find valid filesystem superblock" I've tried this from a rescue disk that doesn't have the filesystem mounted, no joy. Maybe resize2fs doesn't know about ext4?

  Read the article

• How to use Apple Push Notifications to update a Passbook

  - by keithcelt

  I have created Passbooks and they are loaded onto my customer's iOS devices. I need to update these Passbooks. According to the Passbook docs you need to use the Apple Push Notification Service (APNS) to trigger a pull from the iOS device in order to update the Passbook. This APNS push consists of a "push token" and a "pass type id." However, the APNS body is to be left empty. The APNS docs talk about a "device token" needed to send a push notification but make no mention of a "push token." Is an APNS "device token" the same as a Passbook "push token"? How do I send the Passbook "pass type id" in my APNS push?

  Read the article

• Parsing RSS2.0 feeds using Pull Parser on Android

  - by Samuh

  I am trying to parse a RSS2.0 feed, obtained from a remote server, on my Android device using XML Pull Parser. // get a parser instance and set input,encoding XmlPullParser parser = Xml.newPullParser(); parser.setInput(getInputStream(), null); I am getting invalid token exceptions: Error parsing document. (position:line -1, column -1) caused by: org.apache.harmony.xml.ExpatParser$ParseException: At line 158, column 25: not well-formed (invalid token) Strangely, when I download the feed XML on the device, bundle it inside the raw folder and then run the same code. Everything works fine. What could be the problem here? How do I validate the XML before I parse it on device? Thanks.

  Read the article

• WPD MTP data stream hanging on Release

  - by Jonathan Potter

  I've come across a weird problem when reading data from a MTP-compatible mobile device using the WPD (Windows Portable Devices) API, under Windows 8 (not tried any other Windows versions yet). The symptom is, when calling Release on an IStream interface obtained via the IPortableDeviceResources::GetStream function, occasionally the Release call will hang and not return until the device is disconnected from the PC. After some experimentation I've discovered that this never happens as long as the entire contents of the stream have been read. But if the stream has only been partially read (say, the first 256Kb of the file), it can happen seemingly at random (although quite frequently). This has been reproduced with an iPhone and a Windows Phone 8 mobile, so it does not seem to be device-specific. Has anyone come across this sort of issue before? And more importantly, does anyone know of a way to solve it other than by always reading the entire contents of the stream? Thanks!

  Read the article

• BlackBerry Simulator & BIS Push Service

  - by Submerged

  I am hoping that someone knows if you can use RIMM's push service with BIS WITHOUT a hand held device. I have registered for the push evaluation and I want to program a push server that will send out notifications to BB clients. I got my email this morning containing: Server: Application: XXXXXXXXXXXXXXXXXXX Pwd: xxxXXXXX CPID (Content Provider ID):xxx Start Date (MM/DD/YYYY): X/X/XXXX Expiry Date (MM/DD/YYYY):X/X/XXXX First Name:XXXXXXX Last Name:XXXXX Email:[email protected] Account Type:Plus Source IP:xxx.xxx.xxx.xxx Usage:BIS AND Client: Application Credentials (for use in your client application): Application ID:XXX-xxxxxxxxxxxxxxx Push Port:xxxxx I am hoping someone can tell me where to get started - as an iPhone developer, I have to say, there is much more information. Lastly, if I DO need a device, does that device have to have a dataplan? I wanted to be able to serve my clients from WiFi as well, does the BB push system work only on Cell networks? Thank you

  Read the article

• Serial Port Data Structure

  - by Seth Archer

  I need to send data to a hardware device over serial port. I'm using a program called serial port tool for os x. After I connect to the device there is a form box where I can type data to send. I have no idea how to format the data. Here is an excerpt from the manual for the device. "The Net Manager Command structure consists of one start byte, one command byte, five bytes of data, and a one byte checksum. Each message packet is formatted as follows:" an example command is: Byte0=30 Byte1=7 Byte2=5 Byte3=1 Byte4=2 Byte5=0 Byte6=245 How do I type that into the form box in serial port tool? Thanks, Seth

  Read the article

• Blackberry support for Forms Authentication - ASP.NET MVC app

  - by Derek Mitchell

  I'm writing an ASP.NET MVC application that uses Forms Authentication. The target clients are a variety of mobile web browsers. When I use the BlackBerry 8530 simulator my MVC app authenticates as expected. I can visit pages whose controller methods are decorated with the [Authorize] attribute - no problem - they display and therefore I assume my Forms Authentication is working correctly. Using a physical Windows Mobile device to browse my site, I have the same experience as the BB simulator, the forms authentication works as I would expect. BUT when I try to visit the site using a Blackberry 8900 physical device the Login page keeps on looping back when I click the Login page. The device is not retaining it's "authenticated" status. I added code to verify this and I can see that: Request.IsAuthenticated: False User.Identity.IsAuthenticated: False So my question is what next steps can I take to try and find out why the Blackberry 8900 is losing it's authentication status. Is this cookie related? Anyone have any ideas? Cheers Derek

  Read the article

• Remote access to apache2 server

  - by embedded

  Hi all, I'm trying to test my iPhone application on the device. I have a mac computer which stores my development environment. Right now I can only access PHP files using the http://localhost/PHPFileLocation which does not work when I try to test my app on real device. How do I configure apache2 to be accessible from outside? Is it possible to configure it to a specific IP address? I want to reach some php scripts located on my development machine running apache2 from my iPhone device. Thanks

  Read the article

• Core Location - fallback, location caching and alternatives...

  - by Moshe

  I have a few questions about Core Location. 1) Should the user refuse permission for my app to use core location, or core location is unavailable for some reason, is there a fallback? (Device Locale, for example?) 2)Can I cache a device's location for next time? Does Core Location do this itself? 3)I really need the sunset time in the user's area during the mid-spring season and I have a function to do that, once I have the Latitude and Longitude of the device. Perhaps I can just make an assumption about the time based on Locale? (Example: In the US, assume approximately 7:00pm.)

  Read the article

• iPhone Feedback Service with PHP

  - by Anish

  HI All, Has anybody been able to extract the device tokens from the binary data that iPhone APNS feedback service returns using PHP? I am looking for something similar to what is been implementented using python here http://www.google.com/codesearch/p?hl=en&sa=N&cd=2&ct=rc#m5eOMDWiKUs/APNSWrapper/%5F%5Finit%5F%5F.py&q=feedback.push.apple.com As per the Apple documentation, I know that the first 4 bytes are timestamp, next 2 bytes is the length of the token and rest of the bytes are the actual token in binary format. (http://developer.apple.com/IPhone/library/documentation/NetworkingInternet/Conceptual/RemoteNotificationsPG/CommunicatingWIthAPS/CommunicatingWIthAPS.html#//apple%5Fref/doc/uid/TP40008194-CH101-SW3) I am successfully able to extract the timestamp from the data feedback service returns, but the device token that I get after i convert to hexadecimal using the PHP's built in method bin2hex() is actually different than original device token. I am doing something silly in the conversion. Can anybody help me out if they have already implemented APNS feedback service using PHP? TIA, -Anish

  Read the article

• Is this so bad when using MySQL queries in PHP?

  - by alex

  I need to update a lot of rows, per a user request. It is a site with products. I could... Delete all old rows for that product, then loop through string building a new INSERT query. This however will lose all data if the INSERT fails. Perform an UPDATE through each loop. This loop currently iterates over 8 items, but in the future it may get up to 15. This many UPDATEs doesn't sound like too good an idea. Change DB Schema, and add an auto_increment Id to the rows. Then first do a SELECT, get all old rows ids in a variable, perform one INSERT, and then a DELETE WHERE IN SET. What is the usual practice here? Thanks

  Read the article

• flex 3 using nested repeaters

  - by ccdugga

  I'm trying to loop through a row of an arraycollection using nested repeater; <mx:Repeater id="rp1" dataProvider="{arrayCollection}"> <mx:Repeater id="rp2" dataProvider="{rp1.currentItem}"> <mx:Button height="49" width="50" label="{rp2.currentItem.name}" /> </mx:Repeater> </mx:Repeater> What im trying to do is make the repeater loop through all the attributes in the currentRow, eg. name,age, address etc. At the moment all i do is call rp2.currentItem.name which explicitly calls out the name of the attribute and then the value is returned. Is it possible instead of explicity naming the attribute to just loop through them all and dispplay button for each using the nested repeater?thanks

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >