Search Results

Search found 17366 results on 695 pages for 'memory card'.

Page 194/695 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• Newly installed 12.04 on Radeon or NVIDIA type of gfx card?

  - by Falk

  I use a Nvidia Quadro NVS 290/PCIe/SSE2 at work with dual monitor setup. Since 11.10 things has gone downwards with performance. But now with 12.04 performance is even worse, and I can agree that the 290 is old and puny. So when I look what low profile cards I can get to my computer today, the choice it Radeon HD 6570 or NVIDIA Quadro 600. I have always used Nvidia on linux beq I think that historically their drivers worked better. But which one do you recommend today on 12.04 and Unity3d? -- Regards Falk

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• Avoiding Heap Contention Among Threads

  Allocating memory from the system heap can be an expensive operation Dynamic memory allocation - Programming - Memory management - Hardware - Components

  Read the article

• What Can I Use A Laptop Data Card For?

  So you?ve been looking at alternatives to having internet cable installed in your home and you?re feeling pretty guilty about stealing the neighbors Wi-Fi. If you?re tired of going down to your local... [Author: Tony Previte - Computers and Internet - April 03, 2010]

  Read the article

• How do I get a Broadcom Wireless BCM43225 card working?

  - by DanFritz

  During the installation of my Ubuntu 12.10 I could use the wireless connection for extra updates. After the installation I updated Ubuntu and it installed 74 new updates, after that no wireless connection (say what!). So I did try some stuff, I followed the tutorial to load the windows drivers using ndiswrapper (https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper) but I always get that the ndiswrapper module is not loaded (but I did install the extra 3 packages, still doesnt work). ndiswrapper-source ndiswrapper-dkms ndiswrapper-common Please somebody help! Thanks a lot

  Read the article

• How do I get a Broadcom BCM4313 wireless card working?

  - by viky

  I upgraded Ubuntu from 11.10 to 12.04, until which wireless was working just fine. After the upgrade and reboot, wireless is not even being detected (When I click the network manager icon in the top panel, it does not show the wireless networks. Neither the Enable wireless option is there). But my laptop's LED indicator shows wireless is on. This is a Dell Vostro 3450 laptop with: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)** (from lspci). Is any other info needed? How do I get Wifi working?

  Read the article

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• disable intel gpu in ubuntu 12.04

  - by small_potato

  I am wondering if there is anything to disable the intel gpu on ubuntu 12.04. I want to be able to setup dual monitor using nvidia-settings. It seems the intel gpu is used for display as suggested by sudo lshw -c display the output is *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:c0000000-c0ffffff memory:90000000-9fffffff memory:a0000000-a1ffffff ioport:4000(size=128) memory:a2000000-a207ffff *-display description: VGA compatible controller product: Haswell Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:c2000000-c23fffff memory:b0000000-bfffffff ioport:5000(size=64) I have a lenovoY410 with GT750M. It seems there is no way to turn off the intel gpu in bios either. Help please. Thanks.

  Read the article

• 12.04: I need a new network card - and I think this one may work?

  - by Jason Malone

  I found this list of compatible USB wireless network adaptors: http://www.cyberciti.biz/tips/linux-usb-wireless-compatibility-adapter-list.html Listed here is the Belkin F5D8053. I'm looking for a store to buy a suitable adaptor in locally and I can't find that particular adaptor - but I can see a Belkin F7D4101az. I think this is simply a newer model - but a Google search for "ubuntu belkin f7d4101az" brings no results - not even people trying to get it to work. Nothing. So I didn't want to purchase it without being sure. There's really only one PC shop that sells this sort of stuff around here - so here's a list of all my available options: http://www.pcworld.co.uk/gbuk/wireless-cards-adapters/xx_7088_70095_xx_xx/xx-criteria.html I'd really like to get one today, because I have a lot of work to do and don't really want to have to wait a week for a new adaptor - I spent 6 or 7 hours last night trying to get my Dell 1450 to work with no luck. Any help would be much appreciated.

  Read the article

• Unable to get wireless card working properly in DELL D620 laptop - Zorin OS 6.0 (3.2.0)

  - by ElliTech

  I have a DELL D620 laptop running Zorin OS 6.0 (3.2.0) The wireless was working prior to running Update Manager. Here is the output from some commands: dell@dell-lt:/$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no dell@dell-lt:/$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell@dell-lt:/$ ifconfig -a eth0 Link encap:Ethernet HWaddr 00:18:8b:d4:d8:2f inet addr:192.168.1.74 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::218:8bff:fed4:d82f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22227 errors:0 dropped:0 overruns:0 frame:0 TX packets:15027 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26452734 (26.4 MB) TX bytes:1708955 (1.7 MB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I am at a loss as to how to get the wireless working!!! ElliTech

  Read the article

• Does GPG allow encryption of multiple files using a wild card like *filename*? [on hold]

  - by user47427

  I am trying to automate the encryption of files on a windows server using a .bat file I created. As long as the filename is hardcoded in the .bat file this works. I want to encrypt numerous files using this .bat file but files are not encrypted when I use wildcards in the filename like filename.txt. I've been trying various version of the following command at the DOS prompt to no avail. All attempts have returned syntax for usage. C:\gpg -v --batch -- yes --always-trust -e -r <encryption-key> *part-of-the-file-name* usage: gpg [options] --encrypt [filename] I received the same usage message with this command: C:\gpg -v --batch -- yes --always-trust -e -r --encrypt part-of-the-file-name I tried without the -v and some of the other options and I still received the same message. I have spent hours today searching the internet for an answer and I can't find one anywhere? Please help.

  Read the article

• How do I get the wireless card on a Lenovo S205 working?

  - by user206829

  I tried to install 12.04, 13.04, and now 13.10 on the machine and followed all the instructions that made sense that I could find and still have not gotten wifi to work. It keeps it hard blocked for some reason, not sure why and not sure anyone out there either has figured it out because I would have found it on Google. When I boot from the formatted USB drive, I have WiFi and everything working, why doesn't work after the USB drive is removed? What driver is the USB/wubi or whatever using so that I can install it and have things working? I could have used wubi and installed Ubuntu like that, but I want to make this machine a fully dedicated Ubuntu machine. The laptop is a Lenovo S205 in case anyone can help. I really would like to use 12.04 or higher, i don't want to downgrade to an older version of Ubuntu if at all possible.

  Read the article

• Problems with makeObjectsPerformSelector inside and outside a class?

  - by QuakAttak

  A friend and I are creating a card game for the iPhone, and in these early days of the project, I'm developing a Deck class and a Card class to keep up with the cards. I'm wanting to test the shuffle method of the Deck class, but I am not able to show the values of the cards in the Deck class instance. The Deck class has a NSArray of Card objects that have a method called displayCard that shows the value and suit using console output(printf or NSLog). In order to show what cards are in a Deck instance all at once, I am using this, [deck makeObjectsPerformSelector:@selector(displayCard)], where deck is the NSArray in the Deck class. Inside of the Deck class, nothing is displayed on the console output. But in a test file, it works just fine. Here's the test file that creates its own NSArray: #import <Foundation/Foundation.h> #import "card.h" int main (int argc, char** argv) { NSAutoreleasePool* pool = [[NSAutoreleasePool alloc] init]; Card* two = [[Card alloc] initValue:2 withSuit:'d']; Card* three = [[Card alloc] initValue:3 withSuit:'h']; Card* four = [[Card alloc] initValue:4 withSuit:'c']; NSArray* deck = [NSArray arrayWithObjects:two,three,four,nil]; //Ok, what if we release the objects in the array before they're used? //I don't think this will work... [two release]; [three release]; [four release]; //Ok, it works... I wonder how... //Hmm... how will this work? [deck makeObjectsPerformSelector:@selector(displayCard)]; //Yay! It works fine! [pool release]; return 0; } This worked beautifully, so I created an initializer around this idea, creating 52 card objects one at a time and adding them to the NSArray using deck = [deck arrayByAddingObject:newCard]. Is the real problem with how I'm using makeObjectsPerformSelector or something before/after it?

  Read the article

• How can I make sound over hdmi in kubuntu work?

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :)

  Read the article

• How to verify system using right GPU, after system reset [duplicate]

  - by Antoros

  This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

  Read the article

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• AS3 - Unloaded AVM1 swfs trace out as unloaded but memory is not freed for the AVM2 machine

  - by puppbits

  I have a large project built in as3. Part of its main functionality is to load and unload various as2 swfs. The problem is that the memory ins't free up once they are unloaded. I have access to the as2 swfs code base and destroyed all objects, stopped and killed timers, listeners, removed from stage, destroyed all the MovieClip.protoypes that were created. They look to be clean as far as the AS2 debugger show no remnants of the object after the destroy function is run. In AS3 i've closed the local connection, cleaned all references/listeners to the AVM1Movie and ran Loader.unloadAndStop(). The trace out in flex says the swf was unloaded but looking at windows task manager the memory usage never drops to when it was before the as2 swf was loaded. Each as2 swf can take up to 80 megs each time it's run so memory gets eaten up fast and loading and unloading a few as2 files. At this point if the AS2 swfs are unloaded the only thing that I can assume that could be left is MovieClip.prototype and/or _global, _root variables add during the AS2's run time. But i've gone through those and can't find anything else that might be sticking. Has anyone ever seen problems before with the AVM1 machine not freeing up its memory?

  Read the article

• Does Ctypes Structures and POINTERS automatically free the memory when the Python object is deleted?

  - by jsbueno

  When using Python CTypes there are the Structures, that allow you to clone c-structures on the Python side, and the POINTERS objects that create a sofisticated Python Object from a memory address value and can be used to pass objects by reference back and forth C code. What I could not find on the documentation or elsewhere is what happens when a Python object containing a Structure class that was de-referenced from a returning pointer from C Code (that is - the C function alocated memory for the structure) is itself deleted. Is the memory for the original C structure freed? If not how to do it? Furthermore -- what if the Structure contains Pointers itself, to other data that was also allocated by the C function? Does the deletion of the Structure object frees the Pointers onits members? (I doubt so) Else - -how to do it? Trying to call the system "free" from Python for the Pointers in the Structure is crashing Python for me. In other words, I have this structure filled up by a c Function call: class PIX(ctypes.Structure): """Comments not generated """ _fields_ = [ ("w", ctypes.c_uint32), ("h", ctypes.c_uint32), ("d", ctypes.c_uint32), ("wpl", ctypes.c_uint32), ("refcount", ctypes.c_uint32), ("xres", ctypes.c_uint32), ("yres", ctypes.c_uint32), ("informat", ctypes.c_int32), ("text", ctypes.POINTER(ctypes.c_char)), ("colormap", ctypes.POINTER(PIXCOLORMAP)), ("data", ctypes.POINTER(ctypes.c_uint32)) ] And I want to free the memory it is using up from Python code.

  Read the article

• how can I save/keep-in-sync an in-memory graph of objects with the database?

  - by Greg

  Question - What is a good best practice approach for how can I save/keep-in-sync an jn-memory graph of objects with the database? Background: That is say I have the classes Node and Relationship, and the application is building up a graph of related objects using these classes. There might be 1000 nodes with various relationships between them. The application needs to query the structure hence an in-memory approach is good for performance no doubt (e.g. traverse the graph from Node X to find the root parents) The graph does need to be persisted however into a database with tables NODES and RELATIONSHIPS. Therefore what is a good best practice approach for how can I save/keep-in-sync an jn-memory graph of objects with the database? Ideal requirements would include: build up changes in-memory and then 'save' afterwards (mandatory) when saving, apply updates to database in correct order to avoid hitting any database constraints (mandatory) keep persistence mechanism separate from model, for ease in changing persistence layer if needed, e.g. don't just wrap an ADO.net DataRow in the Node and Relationship classes (desirable) mechanism for doing optimistic locking (desirable) Or is the overhead of all this for a smallish application just not worth it and I should just hit the database each time for everything? (assuming the response times were acceptable) [would still like to avoid if not too much extra overhead to remain somewhat scalable re performance]

  Read the article

• Correct way to switch between UIView with ARC. My way leads to memory leaks :( (iOS)

  - by Andrei Golubev

  i use xcode 4.4 with ARC on.. I have dynamically created UIViews in the ViewController.m: UIView*myviews[10]; Then in the - (void)viewDidLoad function i fill each of it with pictures i need myviews[viewIndex] = [[UIView alloc]initWithFrame:myrec]; UIImage *testImg; UIImageView * testImgView; testImg = [UIImage imageNamed:[NSString stringWithFormat:@"imgarray%d.png", viewIndex]; testImgView.image = testImg; viewindex++; So all seems to be fine, when i want to jump from one view to another i do with two buttons next: [self.view addSubview:views[viewIndex]]; CATransition *animation = [CATransition animation]; [animation setDelegate:self]; [animation setDuration:1.0f]; [animation setType:@"rippleEffect"]; [animation setSubtype:kCATransitionFromTop]; //[animation setTimingFunction:[CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionEaseInEaseOut]]; [self.view.layer addAnimation:animation forKey:@"transitionViewAnimation"]; Nothing seems to be bad, but the memory consumption grows with huge speed when i switch between views.. and then i get low memory warning or sometimes application will just crash. I have tried to use UIViewController array and was switching between the controllers: nothing changes, the memory low warning is what i end up with.. Maybe i need to clean the memory somehow? But how? ARC does not allow to use release and so on.. last what i have tried (sorry, maybe not very professional) before to add new subview is this NSArray *viewsToRemove = [self.view subviews]; for (UIView *views in viewsToRemove) { [views removeFromSuperview]; } But this does not help either.. Please don't judge too strong, i am still new to iOS and Objective-c..

  Read the article

• Good C++ array class for dealing with large arrays of data in a fast and memory efficient way?

  - by Shane MacLaughlin

  Following on from a previous question relating to heap usage restrictions, I'm looking for a good standard C++ class for dealing with big arrays of data in a way that is both memory efficient and speed efficient. I had been allocating the array using a single malloc/HealAlloc but after multiple trys using various calls, keep falling foul of heap fragmentation. So the conclusion I've come to, other than porting to 64 bit, is to use a mechanism that allows me to have a large array spanning multiple smaller memory fragments. I don't want an alloc per element as that is very memory inefficient, so the plan is to write a class that overrides the [] operator and select an appropriate element based on the index. Is there already a decent class out there to do this, or am I better off rolling my own? From my understanding, and some googling, a 32 bit Windows process should theoretically be able address up to 2GB. Now assuming I've 2GB installed, and various other processes and services are hogging about 400MB, how much usable memory do you think my program can reasonably expect to get from the heap? I'm currently using various flavours of Visual C++.

  Read the article

• How does a hard drive compare to Flash memory working as a hard drive in terms of speed?

  - by Jian Lin

  Some experiment I did with hard drive read/write speed was 10MB/s write and 40MB/s read, and with a USB Flash drive, it can be 5MB/s write and 10MB/s read. Also, if I put a virtual hard drive .vhd file in a hard drive or in a USB Flash drive and try a Virtual Machine using it, the one using the hard drive is quite fast, while the one using the USB Flash drive is close to not usable. So I wonder some early netbooks use 4GB or 8GB flash memory as the hard drive, and even the Apple Mac Air has an option of using flash memory instead of a hard drive. But in those situation, will the speed be slower than using a hard drive, like in the case of a USB Flash drive?

  Read the article

• How do I make kdump use a permissible range of memory for the crash kernel?

  - by Philip Durbin

  I've read the Red Hat Knowledgebase article "How do I configure kexec/kdump on Red Hat Enterprise Linux 5?" at http://kbase.redhat.com/faq/docs/DOC-6039 and http://prefetch.net/blog/index.php/2009/07/06/using-kdump-to-get-core-files-on-fedora-and-centos-hosts/ The crashkernel=128M@16M kernel parameter works fine for me in a RHEL 6.0 beta VM, but not on the RHEL 5.5 hosts I've tried. dmesg shows me: Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Here's the line from grub.conf: kernel /vmlinuz-2.6.18-194.3.1.el5 ro root=/dev/md2 console=ttyS0,115200 panic=15 rhgb quiet crashkernel=128M@16M How do I make kdump use a permissible range of memory for the crash kernel?

  Read the article

• What solutions do I have to enforce memory limit on PHP server?

  - by Zulgrib

  I would like to enforce memory limit on a folder basis (and have it applied on subfolders) but I don't want the user able to change the memory limit. I know I can disable ini_set and I know I can enforce a hard limit or deny ini_set with Suhosin. With the first one, I doubt it will block changing it from the user.ini file, for the second, the user may still be able to change it to the hard limit I enforce with Suhosin. In both cases, I would prefer to not entierly block ini_set because it may have a legit use for other settings. In case it is important, I'm using PHP version 5.4.4 with nginx (PHP in FPM mode)

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >