named parameters - Page 194

How to track subdomains with Google Analytics while having mod_rewrite redirect to a subdomain?

- by Marek

When users come directly to domain.com or www.domain.com, I am redirecting them to shop.domain.com via this .htaccess rewrite: RewriteEngine on RewriteCond %{HTTP_HOST} ^www.domain.com$ [OR] RewriteCond %{HTTP_HOST} ^domain.com$ RewriteRule ^(.*)$ http://shop.domain.com/ [R=301,L] The content served by shop.domain.com has the following tracking code parameters: var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-123456-6']); _gaq.push(['_setDomainName', '.domain.com']); _gaq.push(['_trackPageview']); All direct visits that come to shop.domain.com as a result of the rewrite from domain.com are tracked as referral traffic, showing my own domain.com as referral source in Google Amalytics. I would like to track these visits as direct traffic. How to change the configuration to track mod_rewritten traffic on my subdomain coming from my own domain as direct traffic?

Read the article

Good ol fashioned debugging

- by Tim Dexter

I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

Read the article

Posting from ASP.NET WebForms page to another URL

- by hajan

Few days ago I had a case when I needed to make FORM POST from my ASP.NET WebForms page to an external site URL. More specifically, I was working on implementing Simple Payment System (like Amazon, PayPal, MoneyBookers). The operator asks to make FORM POST request to a given URL in their website, sending parameters together with the post which are computed on my application level (access keys, secret keys, signature, return-URL… etc). So, since we are not allowed nesting another form inside the <form runat=”server”> … </form>, which is required because other controls in my ASPX code work on server-side, I thought to inject the HTML and create FORM with method=”POST”. After making some proof of concept and testing some scenarios, I’ve concluded that I can do this very fast in two ways: Using jQuery to create form on fly with the needed parameters and make submit() Using HttpContext.Current.Response.Write to write the form on server-side (code-behind) and embed JavaScript code that will do the post Both ways seemed fine. 1. Using jQuery to create FORM html code and Submit it. Let’s say we have ‘PAY NOW’ button in our ASPX code: <asp:Button ID="btnPayNow" runat="server" Text="Pay Now" /> Now, if we want to make this button submit a FORM using POST method to another website, the jQuery way should be as follows: <script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.5.1.js" type="text/javascript"></script> <script type="text/javascript"> $(function () { $("#btnPayNow").click(function (event) { event.preventDefault(); //construct htmlForm string var htmlForm = "<form id='myform' method='POST' action='http://www.microsoft.com'>" + "<input type='hidden' id='name' value='hajan' />" + "</form>"; //Submit the form $(htmlForm).appendTo("body").submit(); }); }); </script> Yes, as you see, the code fires on btnPayNow click. It removes the default button behavior, then creates htmlForm string. After that using jQuery we append the form to the body and submit it. Inside the form, you can see I have set the htttp://www.microsoft.com URL, so after clicking the button you should be automatically redirected to the Microsoft website (just for test, of course for Payment I’m using Operator's URL). 2. Using HttpContext.Current.Response.Write to write the form on server-side (code-behind) and embed JavaScript code that will do the post The C# code behind should be something like this: public void btnPayNow_Click(object sender, EventArgs e) { string Url = "http://www.microsoft.com"; string formId = "myForm1"; StringBuilder htmlForm = new StringBuilder(); htmlForm.AppendLine("<html>"); htmlForm.AppendLine(String.Format("<body onload='document.forms[\"{0}\"].submit()'>",formId)); htmlForm.AppendLine(String.Format("<form id='{0}' method='POST' action='{1}'>", formId, Url)); htmlForm.AppendLine("<input type='hidden' id='name' value='hajan' />"); htmlForm.AppendLine("</form>"); htmlForm.AppendLine("</body>"); htmlForm.AppendLine("</html>"); HttpContext.Current.Response.Clear(); HttpContext.Current.Response.Write(htmlForm.ToString()); HttpContext.Current.Response.End(); } So, with this code we create htmlForm string using StringBuilder class and then just write the html to the page using HttpContext.Current.Response.Write. The interesting part here is that we submit the form using JavaScript code: document.forms["myForm1"].submit() This code runs on body load event, which means once the body is loaded the form is automatically submitted. Note: In order to test both solutions, create two applications on your web server and post the form from first to the second website, then get the values in the second website using Request.Form[“input-field-id”] I hope this was useful post for you. Regards, Hajan

Read the article

Can’t use Sub Reports and Shared Datasets in BIDS - Data Retrieval failed for the subreport '###', located at ### Please check the log files

- by simonsabin

SQL Server 2008 R2 brings us a great new feature of shared data sets. This allows datasets used by parameters and multiple reports to be defined in one place and used in multiple reports. I’ve been developing a report for SQLBits that required use of sub reports. They all use a shared data set for the agenda items. Initially I was developing in report builder but have now gone back to BIDS. In doing this however all the reports bust reporting the following error Data Retrieval failed for the subreport...(read more)

Read the article

RIDC Accelerator for Portal

- by Stefan Krantz

What is RIDC?Remote IntraDoc Client is a Java enabled API that leverages simple transportation protocols like Socket, HTTP and JAX/WS to execute content service operations in WebCenter Content Server. Each operation by design in the Content Server will execute stateless and return a complete result of the request. Each request object simply specifies the in a Map format (key and value pairs) what service to call and what parameters settings to apply. The result responded with will be built on the same Map format (key and value pairs). The possibilities with RIDC is endless since you can consume any available service (even custom made ones), RIDC can be executed from any Java SE application that has any WebCenter Content Services needs. WebCenter Portal and the example Accelerator RIDC adapter frameworkWebCenter Portal currently integrates and leverages WebCenter Content Services to enable available use cases in the portal today, like Content Presenter and Doc Lib. However the current use cases only covers few of the scenarios that the Content Server has to offer, in addition to the existing use cases it is not rare that the customer requirements requires additional steps and functionality that is provided by WebCenter Content but not part of the use cases from the WebCenter Portal.The good news to this is RIDC, the second good news is that WebCenter Portal already leverages the RIDC and has a connection management framework in place. The million dollar question here is how can I leverage this infrastructure for my custom use cases. Oracle A-Team has during its interactions produced a accelerator adapter framework that will reuse and leverage the existing connections provisioned in the webcenter portal application (works for WebCenter Spaces as well), as well as a very comprehensive design patter to minimize the work involved when exposing functionality. Let me introduce the RIDCCommon framework for accelerating WebCenter Content consumption from WebCenter Portal including Spaces. How do I get started?Through a few easy steps you will be on your way, Extract the zip file RIDCCommon.zip to the WebCenter Portal Application file structure (PortalApp) Open you Portal Application in JDeveloper (PS4/PS5) select to open the project in your application - this will add the project as a member of the application Update the Portal project dependencies to include the new RIDCCommon project Make sure that you WebCenter Content Server connection is marked as primary (a checkbox at the top of the connection properties form) You should by this stage have a similar structure in your JDeveloper Application Project Portal Project PortalWebAssets Project RIDCCommon Since the API is coming with some example operations that has already been exposed as DataControl actions, if you open Data Controls accordion you should see following: How do I implement my own operation? Create a new Java Class in for example com.oracle.ateam.portal.ridc.operation call it (GetDocInfoOperation) Extend the abstract class com.oracle.ateam.portal.ridc.operation.RIDCAbstractOperation and implement the interface com.oracle.ateam.portal.ridc.operation.IRIDCOperation The only method you actually are required to implement is execute(RIDCManager, IdcClient, IdcContext) The best practice to set object references for the operation is through the Constructor, example below public GetDocInfoOperation(String dDocName)By leveraging the constructor you can easily force the implementing class to pass right information, you can also overload the Constructor with more or less parameters as required Implement the execute method, the work you supposed to execute here is creating a new request binder and retrieve a response binder with the information in the request binder.In this case the dDocName for which we want the DocInfo Secondly you have to process the response binder by extracting the information you need from the request and restore this information in a simple POJO Java BeanIn the example below we do this in private void processResult(DataBinder responseData) - the new SearchDataObject is a Member of the GetDocInfoOperation so we can return this from a access method. Since the RIDCCommon API leverage template pattern for the operations you are now required to add a method that will enable access to the result after the execution of the operationIn the example below we added the method public SearchDataObject getDataObject() - this method returns the pre processed SearchDataObject from the execute method This is it, as you can see on the code below you do not need more than 32 lines of very simple code 1: public class GetDocInfoOperation extends RIDCAbstractOperation implements IRIDCOperation { 2: private static final String DOC_INFO_BY_NAME = "DOC_INFO_BY_NAME"; 3: private String dDocName = null; 4: private SearchDataObject sdo = null; 5: 6: public GetDocInfoOperation(String dDocName) { 7: super(); 8: this.dDocName = dDocName; 9: } 10: 11: public boolean execute(RIDCManager manager, IdcClient client, 12: IdcContext userContext) throws Exception { 13: DataBinder dataBinder = createNewRequestBinder(DOC_INFO_BY_NAME); 14: dataBinder.putLocal(DocumentAttributeDef.NAME.getName(), dDocName); 15: 16: DataBinder responseData = getResponseBinder(dataBinder); 17: processResult(responseData); 18: return true; 19: } 20: 21: private void processResult(DataBinder responseData) { 22: DataResultSet rs = responseData.getResultSet("DOC_INFO"); 23: for(DataObject dobj : rs.getRows()) { 24: this.sdo = new SearchDataObject(dobj); 25: } 26: super.setMessage(responseData.getLocal(ATTR_MESSAGE)); 27: } 28: 29: public SearchDataObject getDataObject() { 30: return this.sdo; 31: } 32: } How do I execute my operation? In the previous section we described how to create a operation, so by now you should be ready to execute the operation Step one either add a method to the class com.oracle.ateam.portal.datacontrol.ContentServicesDC or a class of your own choiceRemember the RIDCManager is a very light object and can be created where needed Create a method signature look like this public SearchDataObject getDocInfo(String dDocName) throws Exception In the method body - create a new instance of GetDocInfoOperation and meet the constructor requirements by passing the dDocNameGetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName) Execute the operation via the RIDCManager instance rMgr.executeOperation(docInfo) Return the result by accessing it from the executed operationreturn docInfo.getDataObject() 1: private RIDCManager rMgr = null; 2: private String lastOperationMessage = null; 3: 4: public ContentServicesDC() { 5: super(); 6: this.rMgr = new RIDCManager(); 7: } 8: .... 9: public SearchDataObject getDocInfo(String dDocName) throws Exception { 10: GetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName); 11: boolean boolVal = rMgr.executeOperation(docInfo); 12: lastOperationMessage = docInfo.getMessage(); 13: return docInfo.getDataObject(); 14: } Get the binaries! The enclosed code in a example that can be used as a reference on how to consume and leverage similar use cases, user has to guarantee appropriate quality and support. Download link: https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/RIDCCommon.zip RIDC API Referencehttp://docs.oracle.com/cd/E23943_01/apirefs.1111/e17274/toc.htm

Read the article

Building extensions for Expression Blend 4 using MEF

- by Timmy Kokke

Introduction Although it was possible to write extensions for Expression Blend and Expression Design, it wasn’t very easy and out of the box only one addin could be used. With Expression Blend 4 it is possible to write extensions using MEF, the Managed Extensibility Framework. Until today there’s no documentation on how to build these extensions, so look thru the code with Reflector is something you’ll have to do very often. Because Blend and Design are build using WPF searching the visual tree with Snoop and Mole belong to the tools you’ll be using a lot exploring the possibilities. Configuring the extension project Extensions are regular .NET class libraries. To create one, load up Visual Studio 2010 and start a new project. Because Blend is build using WPF, choose a WPF User Control Library from the Windows section and give it a name and location. I named mine DemoExtension1. Because Blend looks for addins named *.extension.dll you’ll have to tell Visual Studio to use that in the Assembly Name. To change the Assembly Name right click your project and go to Properties. On the Application tab, add .Extension to name already in the Assembly name text field. To be able to debug this extension, I prefer to set the output path on the Build tab to the extensions folder of Expression Blend. This means that everything that used to go into the Debug folder is placed in the extensions folder. Including all referenced assemblies that have the copy local property set to false. One last setting. To be able to debug your extension you could start Blend and attach the debugger by hand. I like it to be able to just hit F5. Go to the Debug tab and add the the full path to Blend.exe in the Start external program text field. Extension Class Add a new class to the project. This class needs to be inherited from the IPackage interface. The IPackage interface can be found in the Microsoft.Expression.Extensibility namespace. To get access to this namespace add Microsoft.Expression.Extensibility.dll to your references. This file can be found in the same folder as the (Expression Blend 4 Beta) Blend.exe file. Make sure the Copy Local property is set to false in this reference. After implementing the interface the class would look something like: using Microsoft.Expression.Extensibility; namespace DemoExtension1 { public class DemoExtension1:IPackage { public void Load(IServices services) { } public void Unload() { } } } These two methods are called when your addin is loaded and unloaded. The parameter passed to the Load method, IServices services, is your main entry point into Blend. The IServices interface exposes the GetService<T> method. You will be using this method a lot. Almost every part of Blend can be accessed thru a service. For example, you can use to get to the commanding services of Blend by calling GetService<ICommandService>() or to get to the Windowing services by calling GetService<IWindowService>(). To get Blend to load the extension we have to implement MEF. (You can get up to speed on MEF on the community site or read the blog of Mr. MEF, Glenn Block.) In the case of Blend extensions, all that needs to be done is mark the class with an Export attribute and pass it the type of IPackage. The Export attribute can be found in the System.ComponentModel.Composition namespace which is part of the .NET 4 framework. You need to add this to your references. using System.ComponentModel.Composition; using Microsoft.Expression.Extensibility; namespace DemoExtension1 { [Export(typeof(IPackage))] public class DemoExtension1:IPackage { Blend is able to find your addin now. Adding UI The addin doesn’t do very much at this point. The WPF User Control Library came with a UserControl so lets use that in this example. I just drop a Button and a TextBlock onto the surface of the control to have something to show in the demo. To get the UserControl to work in Blend it has to be registered with the WindowService. Call GetService<IWindowService>() on the IServices interface to get access to the windowing services. The UserControl will be used in Blend on a Palette and has to be registered to enable it. This is done by calling the RegisterPalette on the IWindowService interface and passing it an identifier, an instance of the UserControl and a caption for the palette. public void Load(IServices services) { IWindowService windowService = services.GetService<IWindowService>(); UserControl1 uc = new UserControl1(); windowService.RegisterPalette("DemoExtension", uc, "Demo Extension"); } After hitting F5 to start debugging Expression Blend will start. You should be able to find the addin in the Window menu now. Activating this window will show the “Demo Extension” palette with the UserControl, style according to the settings of Blend. Now what? Because little is publicly known about how to access different parts of Blend adding breakpoints in Debug mode and browsing thru objects using the Quick Watch feature of Visual Studio is something you have to do very often. This demo extension can be used for that purpose very easily. Add the click event handler to the button on the UserControl. Change the contructor to take the IServices interface and store this in a field. Set a breakpoint in the Button_Click method. public partial class UserControl1 : UserControl { private readonly IServices _services; public UserControl1(IServices services) { _services = services; InitializeComponent(); } private void button1_Click(object sender, RoutedEventArgs e) { } } Change the call to the constructor in the load method and pass it the services property. public void Load(IServices services) { IWindowService service = services.GetService<IWindowService>(); UserControl1 uc = new UserControl1(services); service.RegisterPalette("DemoExtension", uc, "Demo Extension"); } Hit F5 to compile and start Blend. Got to the window menu and start show the addin. Click on the button to hit the breakpoint. Now place the carrot text _services text in the code window and hit Shift+F9 to show the Quick Watch window. Now start exploring and discovering where to find everything you need. More Information The are no official resources available yet. Microsoft has released one extension for expression Blend that is very useful as a reference, the Microsoft Expression Blend® Add-in Preview for Windows® Phone. This will install a .extension.dll file in the extension folder of Blend. You can load this file with Reflector and have a peek at how Microsoft is building his addins. Conclusion I hope this gives you something to get started building extensions for Expression Blend. Until Microsoft releases the final version, which hopefully includes more information about building extensions, we’ll have to work on documenting it in the community.

Read the article

Alert visualization recipe: Get out your blender, drop in some sp_send_dbmail, Google Charts API, add your favorite colors and sprinkle with html. Blend till it’s smooth and looks pretty enough to taste.

- by Maria Zakourdaev

I really like database monitoring. My email inbox have a constant flow of different types of alerts coming from our production servers with all kinds of information, sometimes more useful and sometimes less useful. Usually database alerts look really simple, it’s usually a plain text email saying “Prod1 Database data file on Server X is 80% used. You’d better grow it manually before some query triggers the AutoGrowth process”. Imagine you could have received email like the one below. In addition to the alert description it could have also included the the database file growth chart over the past 6 months. Wouldn’t it give you much more information whether the data growth is natural or extreme? That’s truly what data visualization is for. Believe it or not, I have sent the graph below from SQL Server stored procedure without buying any additional data monitoring/visualization tool. Would you like to visualize your database alerts like I do? Then like myself, you’d love the Google Charts. All you need to know is a little HTML and have a mail profile configured on your SQL Server instance regardless of the SQL Server version. First of all, I hope you know that the sp_send_dbmail procedure has a great parameter @body_format = ‘HTML’, which allows us to send rich and colorful messages instead of boring black and white ones. All that we need is to dynamically create HTML code. This is how, for instance, you can create a table and populate it with some data: DECLARE @html varchar(max) SET @html = '<html>' + '<H3><font id="Text" style='color: Green;'>Top Databases: </H3>' + '<table border="1" bordercolor="#3300FF" style='background-color:#DDF8CC' width='70%' cellpadding='3' cellspacing='3'>' + '<tr><font color="Green"><th>Database Name</th><th>Size</th><th>Physical Name</th></tr>' + CAST( (SELECT TOP 10 td = name,'', td = size * 8/1024 ,'', td = physical_name FROM sys.master_files ORDER BY size DESC FOR XML PATH ('tr'),TYPE ) AS VARCHAR(MAX)) + '</table>' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject ='Top databases', @body = @html, @body_format = 'HTML' This is the result: If you want to add more visualization effects, you can use Google Charts Tools https://google-developers.appspot.com/chart/interactive/docs/index which is a free and rich library of data visualization charts, they’re also easy to populate and embed. There are two versions of the Google Charts Image based charts: https://google-developers.appspot.com/chart/image/docs/gallery/chart_gall This is an old version, it’s officially deprecated although it will be up for a next few years or so. I really enjoy using this one because it can be viewed within the email body. For mobile devices you need to change the “Load remote images” property in your email application configuration. Charts based on JavaScript classes: https://google-developers.appspot.com/chart/interactive/docs/gallery This API is newer, with rich and highly interactive charts, and it’s much more easier to understand and configure. The only downside of it is that they cannot be viewed within the email body. Outlook, Gmail and many other email clients, as part of their security policy, do not run any JavaScript that’s placed within the email body. However, you can still enjoy this API by sending the report as an email attachment. Here is an example of the old version of Google Charts API, sending the same top databases report as in the previous example but instead of a simple table, this script is using a pie chart right from the T-SQL code DECLARE @html varchar(8000) DECLARE @Series varchar(800),@Labels varchar(8000),@Legend varchar(8000); SET @Series = ''; SET @Labels = ''; SET @Legend = ''; SELECT TOP 5 @Series = @Series + CAST(size * 8/1024 as varchar) + ',', @Labels = @Labels +CAST(size * 8/1024 as varchar) + 'MB'+'|', @Legend = @Legend + name + '|' FROM sys.master_files ORDER BY size DESC SELECT @Series = SUBSTRING(@Series,1,LEN(@Series)-1), @Labels = SUBSTRING(@Labels,1,LEN(@Labels)-1), @Legend = SUBSTRING(@Legend,1,LEN(@Legend)-1) SET @html = '<H3><font color="Green"> '+@@ServerName+' top 5 databases : </H3>'+ '<br>'+ '<img src="http://chart.apis.google.com/chart?'+ 'chf=bg,s,DDF8CC&'+ 'cht=p&'+ 'chs=400x200&'+ 'chco=3072F3|7777CC|FF9900|FF0000|4A8C26&'+ 'chd=t:'+@Series+'&'+ 'chl='+@Labels+'&'+ 'chma=0,0,0,0&'+ 'chdl='+@Legend+'&'+ 'chdlp=b"'+ 'alt="'+@@ServerName+' top 5 databases" />' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject = 'Top databases', @body = @html, @body_format = 'HTML' This is what you get. Isn’t it great? Chart parameters reference: chf Gradient fill bg - backgroud ; s- solid cht chart type ( p - pie) chs chart size width/height chco series colors chd chart data string 1,2,3,2 chl pir chart labels a|b|c|d chma chart margins chdl chart legend a|b|c|d chdlp chart legend text b - bottom of chart Line graph implementation is also really easy and powerful DECLARE @html varchar(max) DECLARE @Series varchar(max) DECLARE @HourList varchar(max) SET @Series = ''; SET @HourList = ''; SELECT @HourList = @HourList + SUBSTRING(CONVERT(varchar(13),last_execution_time,121), 12,2) + '|' , @Series = @Series + CAST( COUNT(1) as varchar) + ',' FROM sys.dm_exec_query_stats s CROSS APPLY sys.dm_exec_sql_text(plan_handle) t WHERE last_execution_time > = getdate()-1 GROUP BY CONVERT(varchar(13),last_execution_time,121) ORDER BY CONVERT(varchar(13),last_execution_time,121) SET @Series = SUBSTRING(@Series,1,LEN(@Series)-1) SET @html = '<img src="http://chart.apis.google.com/chart?'+ 'chco=CA3D05,87CEEB&'+ 'chd=t:'+@Series+'&'+ 'chds=1,350&'+ 'chdl= Proc executions from cache&'+ 'chf=bg,s,1F1D1D|c,lg,0,363433,1.0,2E2B2A,0.0&'+ 'chg=25.0,25.0,3,2&'+ 'chls=3|3&'+ 'chm=d,CA3D05,0,-1,12,0|d,FFFFFF,0,-1,8,0|d,87CEEB,1,-1,12,0|d,FFFFFF,1,-1,8,0&'+ 'chs=600x450&'+ 'cht=lc&'+ 'chts=FFFFFF,14&'+ 'chtt=Executions for from' +(SELECT CONVERT(varchar(16),min(last_execution_time),121) FROM sys.dm_exec_query_stats WHERE last_execution_time > = getdate()-1) +' till '+ +(SELECT CONVERT(varchar(16),max(last_execution_time),121) FROM sys.dm_exec_query_stats) + '&'+ 'chxp=1,50.0|4,50.0&'+ 'chxs=0,FFFFFF,12,0|1,FFFFFF,12,0|2,FFFFFF,12,0|3,FFFFFF,12,0|4,FFFFFF,14,0&'+ 'chxt=y,y,x,x,x&'+ 'chxl=0:|1|350|1:|N|2:|'+@HourList+'3:|Hour&'+ 'chma=55,120,0,0" alt="" />' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject ='Daily number of executions', @body = @html, @body_format = 'HTML' Chart parameters reference: chco series colors chd series data chds scale format chdl chart legend chf background fills chg grid line chls line style chm line fill chs chart size cht chart type chts chart style chtt chart title chxp axis label positions chxs axis label styles chxt axis tick mark styles chxl axis labels chma chart margins If you don’t mind to get your charts as an email attachment, you can enjoy the Java based Google Charts which are even easier to configure, and have much more advanced graphics. In the example below, the sp_send_email procedure uses the parameter @query which will be executed at the time that sp_send_dbemail is executed and the HTML result of this execution will be attached to the email. DECLARE @html varchar(max),@query varchar(max) DECLARE @SeriesDBusers varchar(800); SET @SeriesDBusers = ''; SELECT @SeriesDBusers = @SeriesDBusers + ' ["'+DB_NAME(r.database_id) +'", ' +cast(count(1) as varchar)+'],' FROM sys.dm_exec_requests r GROUP BY DB_NAME(database_id) ORDER BY count(1) desc; SET @SeriesDBusers = SUBSTRING(@SeriesDBusers,1,LEN(@SeriesDBusers)-1) SET @query = ' PRINT '' <html> <head> <script type="text/javascript" src="https://www.google.com/jsapi"></script> <script type="text/javascript"> google.load("visualization", "1", {packages:["corechart"]}); google.setOnLoadCallback(drawChart); function drawChart() { var data = google.visualization.arrayToDataTable([ ["Database Name", "Active users"], '+@SeriesDBusers+' ]); var options = { title: "Active users", pieSliceText: "value" }; var chart = new google.visualization.PieChart(document.getElementById("chart_div")); chart.draw(data, options); }; </script> </head> <body> <table> <tr><td> <div id="chart_div" style='width: 800px; height: 300px;'></div> </td></tr> </table> </body> </html> ''' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject ='Active users', @body = @html, @body_format = 'HTML', @query = @Query, @attach_query_result_as_file = 1, @query_attachment_filename = 'Results.htm' After opening the email attachment in the browser you are getting this kind of report: In fact, the above is not only for database alerts. It can be used for applicative reports if you need high levels of customization that you cannot achieve using standard methods like SSRS. If you need more information on how to customize the charts, you can try the following: Image Based Charts wizard https://google-developers.appspot.com/chart/image/docs/chart_wizard Live Image Charts Playground https://google-developers.appspot.com/chart/image/docs/chart_playground Image Based Charts Parameters List https://google-developers.appspot.com/chart/image/docs/chart_params Java Script Charts Playground https://code.google.com/apis/ajax/playground/?type=visualization Use the above examples as a starting point for your procedures and I’d be more than happy to hear of your implementations of the above techniques. Yours, Maria

Read the article

DAL Exception handling in a MVP application

- by Chathuranga

In a MVP win forms application I'm handling exceptions as follows in DAL. Since the user messaging is not a responsibility of DAL, I want to move it in to my Presentation class. Could you show me a standard way to do that? public bool InsertAccount(IBankAccount ba) { string selectStatement = @"IF NOT EXISTS (SELECT ac_no FROM BankAccount WHERE ac_no=@ac_no) BEGIN INSERT INTO BankAccount ..."; using (SqlConnection sqlConnection = new SqlConnection(db.ConnectionString)) { using (SqlCommand sqlCommand = new SqlCommand(selectStatement, sqlConnection)) { try { sqlConnection.Open(); sqlCommand.Parameters.Add("@ac_no", SqlDbType.Char).Value = ba.AccountNumber; // // sqlCommand.ExecuteNonQuery(); return true; } catch (Exception e) { MessageBox.Show(("Error: " + e.Message)); } if (sqlConnection.State == System.Data.ConnectionState.Open) sqlConnection.Close(); return false; } } }

Read the article

CDN on Hosted Service in Windows Azure

- by Shaun

Yesterday I told Wang Tao, an annoying colleague sitting beside me, about how to make the static content enable the CDN in his website which had just been published on Windows Azure. The approach would be Move the static content, the images, CSS files, etc. into the blob storage. Enable the CDN on his storage account. Change the URL of those static files to the CDN URL. I think these are the very common steps when using CDN. But this morning I found that the new Windows Azure SDK 1.4 and new Windows Azure Developer Portal had just been published announced at the Windows Azure Blog. One of the new features in this release is about the CDN, which means we can enabled the CDN not only for a storage account, but a hosted service as well. Within this new feature the steps I mentioned above would be turned simpler a lot. Enable CDN for Hosted Service To enable the CDN for a hosted service we just need to log on the Windows Azure Developer Portal. Under the “Hosted Services, Storage Accounts & CDN” item we will find a new menu on the left hand side said “CDN”, where we can manage the CDN for storage account and hosted service. As we can see the hosted services and storage accounts are all listed in my subscriptions. To enable a CDN for a hosted service is veru simple, just select a hosted service and click the New Endpoint button on top. In this dialog we can select the subscription and the storage account, or the hosted service we want the CDN to be enabled. If we selected the hosted service, like I did in the image above, the “Source URL for the CDN endpoint” will be shown automatically. This means the windows azure platform will make all contents under the “/cdn” folder as CDN enabled. But we cannot change the value at the moment. The following 3 checkboxes next to the URL are: Enable CDN: Enable or disable the CDN. HTTPS: If we need to use HTTPS connections check it. Query String: If we are caching content from a hosted service and we are using query strings to specify the content to be retrieved, check it. Just click the “Create” button to let the windows azure create the CDN for our hosted service. The CDN would be available within 60 minutes as Microsoft mentioned. My experience is that about 15 minutes the CDN could be used and we can find the CDN URL in the portal as well. Put the Content in CDN in Hosted Service Let’s create a simple windows azure project in Visual Studio with a MVC 2 Web Role. When we created the CDN mentioned above the source URL of CDN endpoint would be under the “/cdn” folder. So in the Visual Studio we create a folder under the website named “cdn” and put some static files there. Then all these files would be cached by CDN if we use the CDN endpoint. The CDN of the hosted service can cache some kind of “dynamic” result with the Query String feature enabled. We create a controller named CdnController and a GetNumber action in it. The routed URL of this controller would be /Cdn/GetNumber which can be CDN-ed as well since the URL said it’s under the “/cdn” folder. In the GetNumber action we just put a number value which specified by parameter into the view model, then the URL could be like /Cdn/GetNumber?number=2. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: 7: namespace MvcWebRole1.Controllers 8: { 9: public class CdnController : Controller 10: { 11: // 12: // GET: /Cdn/ 13: 14: public ActionResult GetNumber(int number) 15: { 16: return View(number); 17: } 18: 19: } 20: } And we add a view to display the number which is super simple. 1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<int>" %> 2: 3: <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> 4: GetNumber 5: </asp:Content> 6: 7: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 8: 9: <h2>The number is: <% 1: : Model.ToString() %></h2> 10: 11: </asp:Content> Since this action is under the CdnController the URL would be under the “/cdn” folder which means it can be CDN-ed. And since we checked the “Query String” the content of this dynamic page will be cached by its query string. So if I use the CDN URL, http://az25311.vo.msecnd.net/GetNumber?number=2, the CDN will firstly check if there’s any content cached with the key “GetNumber?number=2”. If yes then the CDN will return the content directly; otherwise it will connect to the hosted service, http://aurora-sys.cloudapp.net/Cdn/GetNumber?number=2, and then send the result back to the browser and cached in CDN. But to be notice that the query string are treated as string when used by the key of CDN element. This means the URLs below would be cached in 2 elements in CDN: http://az25311.vo.msecnd.net/GetNumber?number=2&page=1 http://az25311.vo.msecnd.net/GetNumber?page=1&number=2 The final step is to upload the project onto azure. Test the Hosted Service CDN After published the project on azure, we can use the CDN in the website. The CDN endpoint we had created is az25311.vo.msecnd.net so all files under the “/cdn” folder can be requested with it. Let’s have a try on the sample.htm and c_great_wall.jpg static files. Also we can request the dynamic page GetNumber with the query string with the CDN endpoint. And if we refresh this page it will be shown very quickly since the content comes from the CDN without MCV server side process. We style of this page was missing. This is because the CSS file was not includes in the “/cdn” folder so the page cannot retrieve the CSS file from the CDN URL. Summary In this post I introduced the new feature in Windows Azure CDN with the release of Windows Azure SDK 1.4 and new Developer Portal. With the CDN of the Hosted Service we can just put the static resources under a “/cdn” folder so that the CDN can cache them automatically and no need to put then into the blob storage. Also it support caching the dynamic content with the Query String feature. So that we can cache some parts of the web page by using the UserController and CDN. For example we can cache the log on user control in the master page so that the log on part will be loaded super-fast. There are some other new features within this release you can find here. And for more detailed information about the Windows Azure CDN please have a look here as well. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Objective C style nil in java?

- by Usman Ismail

Objective C has a concept of a nil object which would accept any method call with any parameters without complaining and silently return another nil. I have used something similar in Java using easymock and mockito for testing. Is there something similar for main line code? Is it even a good idea to have something like this? One use-case where I am considering using it is with optional metrics. We have codahale metrics counters on which we call mark() every time an event is generated. This is surrounded by an If/then to check for metrics enabled flag. I could just use a nil object as counter and silently accept the mark call if metrics are not enabled.

Read the article

Concurrent Business Events

- by Manoj Madhusoodanan

This blog describes the various business events related to concurrent requests.In the concurrent program definition screen we can see the various business events which are attached to concurrent processing. Following are the actual definition of above business events. Each event will have following parameters. Create subscriptions to above business events.Before testing enable profile option 'Concurrent: Business Intelligence Integration Enable' to Yes. ExampleI have created a scenario.Whenever my concurrent request completes normally I want to send out file as attachment to my mail.So following components I have created.1) Host file deployed on $XXCUST_TOP/bin to send mail.It accepts mail ids,subject and output file.(Code here)2) Concurrent Program to send mail which points to above host file.3) Subscription package to oracle.apps.fnd.concurrent.request.completed.(Code here)Choose a concurrent program which you want to send the out file as attachment.Check Request Completed check box.Submit the program.If it completes normally the business event subscription program will send the out file as attachment to the specified mail id.

Read the article

Updating a SharePoint master page via a solution (WSP)

- by Kelly Jones

In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package. As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint. You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page. Manually uploading your master page to the master page gallery might be the best option, depending on your environment. For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages. Are they using the SharePoint dynamic token or the static token for the master page reference? The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update. So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery. If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page. In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token. Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver. For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case. You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in. I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5: 6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7: 8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24: 25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29: 30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42: 43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48: 49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54: 55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56: 57: FileStream fs = File.OpenRead(filePath); 58: 59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60: 61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75: 76: } 77: 78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85: 86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89: 90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102: 103: return curweb; 104: } This did the trick. It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!). I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

Read the article

HTTP Basic Auth Protected Services using Web Service Data Control

- by vishal.s.jain(at)oracle.com

With Oracle JDeveloper 11g (11.1.1.4.0) one can now create Web Service Data Control for services which are protected with HTTP Basic Authentication.So when you provide such a service to the Data Control Wizard, a dialog pops up prompting you to entry the authentication details:After you give the details, you can proceed with the creation of Data Control.Once the Data Control is created, you can use the WSDC Tester to quickly test the service.In this case, since the service is protected, we need to first edit the connection to provide username details:Enter the authentication details against username and password. Once done, select DataControl.dcx and using the context menu, select 'Run'. This will bring up the Tester.On the Tester, select the Service Node and using context menu pick 'Operations'. This will bring up the methods which you can test:Now you can pick a method, provide the input parameters and hit execute to see the results.

Read the article

11gR2 11.2.0.3 Database Certified with E-Business Suie

- by Elke Phelps (Oracle Development)

The 11gR2 11.2.0.2 Database was certified with E-Business Suite (EBS) 11i and EBS 12 almost one year ago today. I’m pleased to announce that 11.2.0.3, the second patchset for the 11gR2 Database is now certified. Be sure to review the interoperability notes for R11i and R12 for the most up-to-date requirements for deployment. This certification announcement is important as you plan upgrades to the technology stack for your environment. For additional upgrade direction, please refer to the recently published EBS upgrade recommendations article. Database support implications may also be reviewed in the database patching and support article. Oracle E-Business Suite Release 11i Prerequisites 11.5.10.2 + ATG PF.H RUP 6 and higher Certified Platforms Linux x86 (Oracle Linux 4, 5) Linux x86 (RHEL 4, 5) Linux x86 (SLES 10) Linux x86-64 (Oracle Linux 4, 5) -- Database-tier only Linux x86-64 (RHEL 4, 5) -- Database-tier only Linux x86-64 (SLES 10--Database-tier only) Oracle Solaris on SPARC (64-bit) (10) Oracle Solaris on x86-64 (64-bit) (10) -- Database-tier only Pending Platform Certifications Microsoft Windows Server (32-bit) Microsoft Windows Server (64-bit) HP-UX PA-RISC (64-bit) HP-UX Itanium IBM: Linux on System z IBM AIX on Power Systems Oracle E-Business Suite Release 12 Prerequisites Oracle E-Business Suite Release 12.0.4 or later; or,Oracle E-Business Suite Release 12.1.1 or later Certified Platforms Linux x86 (Oracle Linux 4, 5) Linux x86 (RHEL 4, 5) Linux x86 (SLES 10) Linux x86-64 (Oracle Linux 4, 5) Linux x86-64 (RHEL 4, 5) Linux x86-64 (SLES 10) Oracle Solaris on SPARC (64-bit) (10) Oracle Solaris on x86-64 (64-bit) (10) -- Database-tier only Pending Platform Certifications Microsoft Windows Server (32-bit) Microsoft Windows Server (64-bit) HP-UX PA-RISC (64-bit) IBM: Linux on System z IBM AIX on Power Systems HP-UX Itanium Database Feature and Option CertificationsThe following 11gR2 11.2.0.2 database options and features are supported for use: Advanced Compression Active Data Guard Advanced Security Option (ASO) / Advanced Networking Option (ANO) Database Vault Database Partitioning Data Guard Redo Apply with Physical Standby Databases Native PL/SQL compilation Oracle Label Security (OLS) Real Application Clusters (RAC) Real Application Testing SecureFiles Virtual Private Database (VPD) Certification of the following database options and features is still underway: Transparent Data Encryption (TDE) Column Encryption 11gR2 version 11.2.0.3 Transparent Data Encryption (TDE) Tablespace Encryption 11gR2 version 11.2.0.3 About the pending certifications Oracle's Revenue Recognition rules prohibit us from discussing certification and release dates, but you're welcome to monitor or subscribe to this blog for updates, which I'll post as soon as soon as they're available. EBS 11i References Interoperability Notes - Oracle E-Business Suite Release 11i with Oracle Database 11g Release 2 (11.2.0) (Note 881505.1) Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i (Note 823586.1) Encrypting Oracle E-Business Suite Release 11i Network Traffic using Advanced Security Option and Advanced Networking Option (Note 391248.1) Using Transparent Data Encryption with Oracle E-Business Release 11i (Note 403294.1) Integrating Oracle E-Business Suite Release 11i with Oracle Database Vault 11gR2 (Note 1091086.1) Using Oracle E-Business Suite with a Split Configuration Database Tier on Oracle 11gR2 Version 11.2.0.1.0 (Note 946413.1) Export/Import Process for Oracle E-Business Suite Release 11i Database Instances Using Oracle Database 11g Release 1 or 2 (Note 557738.1) Database Initialization Parameters for Oracle Applications Release 11i (Note 216205.1) EBS 12 References Interoperability Notes - Oracle E-Business Suite Release 12 with Oracle Database 11g Release 2 (11.2.0) (Note 1058763.1) Database Initialization Parameters for Oracle Applications Release 12 (Note 396009.1) Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Note 823587.1) Using Transparent Data Encryption with Oracle E-Business Suite Release 12 (Note 732764.1) Integrating Oracle E-Business Suite Release 12 with Oracle Database Vault 11gR2 (Note 1091083.1) Export/Import Process for Oracle E-Business Suite Release 12 Database Instances Using Oracle Database 11g Release 1 or 11g Release 2 (Note 741818.1) Enabling SSL in Oracle Applications Release 12 (Note 376700.1) Related Articles 11gR2 Database Certified with E-Business Suite 11i 11gR2 Database Certified with E-Business Suite 12 11gR2 11.2.0.2 Database Certified with E-Business Suite 12 Can E-Business Users Apply Database Patch Set Updates? On Apps Tier Patching and Support: A Primer for E-Business Suite Users On Database Patching and Support: A Primer for E-Business Suite Users Quarterly E-Business Suite Upgrade Recommendations; October 2011 Edition The preceding is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decision. The development, release, and timing of any features or functionality described for Oracle's products remains at the sole discretion of Oracle.

Read the article

SQL SERVER – Parsing SSIS Catalog Messages – Notes from the Field #030

- by Pinal Dave

[Note from Pinal]: This is a new episode of Notes from the Field series. SQL Server Integration Service (SSIS) is one of the most key essential part of the entire Business Intelligence (BI) story. It is a platform for data integration and workflow applications. The tool may also be used to automate maintenance of SQL Server databases and updates to multidimensional cube data. In this episode of the Notes from the Field series I requested SSIS Expert Andy Leonard to discuss one of the most interesting concepts of SSIS Catalog Messages. There are plenty of interesting and useful information captured in the SSIS catalog and we will learn together how to explore the same. The SSIS Catalog captures a lot of cool information by default. Here’s a query I use to parse messages from the catalog.operation_messages table in the SSISDB database, where the logged messages are stored. This query is set up to parse a default message transmitted by the Lookup Transformation. It’s one of my favorite messages in the SSIS log because it gives me excellent information when I’m tuning SSIS data flows. The message reads similar to: Data Flow Task:Information: The Lookup processed 4485 rows in the cache. The processing time was 0.015 seconds. The cache used 1376895 bytes of memory. The query: USE SSISDB GO DECLARE @MessageSourceType INT = 60 DECLARE @StartOfIDString VARCHAR(100) = 'The Lookup processed ' DECLARE @ProcessingTimeString VARCHAR(100) = 'The processing time was ' DECLARE @CacheUsedString VARCHAR(100) = 'The cache used ' DECLARE @StartOfIDSearchString VARCHAR(100) = '%' + @StartOfIDString + '%' DECLARE @ProcessingTimeSearchString VARCHAR(100) = '%' + @ProcessingTimeString + '%' DECLARE @CacheUsedSearchString VARCHAR(100) = '%' + @CacheUsedString + '%' SELECT operation_id , SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1))) AS LookupRowsCount , SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))) AS LookupProcessingTime , CASE WHEN (CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1))))) = 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) / CONVERT(numeric(3,3),SUBSTRING(MESSAGE, (PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@ProcessingTimeSearchString,MESSAGE) + LEN(@ProcessingTimeString) + 1)) - (PATINDEX(@ProcessingTimeSearchString, MESSAGE) + LEN(@ProcessingTimeString) + 1)))) END AS LookupRowsPerSecond , SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1))) AS LookupBytesUsed ,CASE WHEN (CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))))= 0 THEN 0 ELSE CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@CacheUsedSearchString,MESSAGE) + LEN(@CacheUsedString) + 1)) - (PATINDEX(@CacheUsedSearchString, MESSAGE) + LEN(@CacheUsedString) + 1)))) / CONVERT(bigint,SUBSTRING(MESSAGE, (PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1), ((CHARINDEX(' ', MESSAGE, PATINDEX(@StartOfIDSearchString,MESSAGE) + LEN(@StartOfIDString) + 1)) - (PATINDEX(@StartOfIDSearchString, MESSAGE) + LEN(@StartOfIDString) + 1)))) END AS LookupBytesPerRow FROM [catalog].[operation_messages] WHERE message_source_type = @MessageSourceType AND MESSAGE LIKE @StartOfIDSearchString GO Note that you have to set some parameter values: @MessageSourceType [int] – represents the message source type value from the following results: Value Description 10 Entry APIs, such as T-SQL and CLR Stored procedures 20 External process used to run package (ISServerExec.exe) 30 Package-level objects 40 Control Flow tasks 50 Control Flow containers 60 Data Flow task 70 Custom execution message Note: Taken from Reza Rad’s (excellent!) helper.MessageSourceType table found here. @StartOfIDString [VarChar(100)] – use this to uniquely identify the message field value you wish to parse. In this case, the string ‘The Lookup processed ‘ identifies all the Lookup Transformation messages I desire to parse. @ProcessingTimeString [VarChar(100)] – this parameter is message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Processing Time value. For this execution, I use the string ‘The processing time was ‘. @CacheUsedString [VarChar(100)] – this parameter is also message-specific. I use this parameter to specifically search the message field value for the beginning of the Lookup Cache Used value. It returns the memory used, in bytes. For this execution, I use the string ‘The cache used ‘. The other parameters are built from variations of the parameters listed above. The query parses the values into text. The string values are converted to numeric values for ratio calculations; LookupRowsPerSecond and LookupBytesPerRow. Since ratios involve division, CASE statements check for denominators that equal 0. Here are the results in an SSMS grid: This is not the only way to retrieve this information. And much of the code lends itself to conversion to functions. If there is interest, I will share the functions in an upcoming post. If you want to get started with SSIS with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSIS

Read the article

ASP.NET Web API - Screencast series Part 4: Paging and Querying

- by Jon Galloway

We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we modified data on the server using DELETE and POST methods. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying. This part shows two approaches to querying data (paging really just being a specific querying case) - you can do it yourself using parameters passed in via querystring (as well as headers, other route parameters, cookies, etc.). You're welcome to do that if you'd like. What I think is more interesting here is that Web API actions that return IQueryable automatically support OData query syntax, making it really easy to support some common query use cases like paging and filtering. A few important things to note: This is just support for OData query syntax - you're not getting back data in OData format. The screencast demonstrates this by showing the GET methods are continuing to return the same JSON they did previously. So you don't have to "buy in" to the whole OData thing, you're just able to use the query syntax if you'd like. This isn't full OData query support - full OData query syntax includes a lot of operations and features - but it is a pretty good subset: filter, orderby, skip, and top. All you have to do to enable this OData query syntax is return an IQueryable rather than an IEnumerable. Often, that could be as simple as using the AsQueryable() extension method on your IEnumerable. Query composition support lets you layer queries intelligently. If, for instance, you had an action that showed products by category using a query in your repository, you could also support paging on top of that. The result is an expression tree that's evaluated on-demand and includes both the Web API query and the underlying query. So with all those bullet points and big words, you'd think this would be hard to hook up. Nope, all I did was change the return type from IEnumerable<Comment> to IQueryable<Comment> and convert the Get() method's IEnumerable result using the .AsQueryable() extension method. public IQueryable<Comment> GetComments() { return repository.Get().AsQueryable(); } You still need to build up the query to provide the $top and $skip on the client, but you'd need to do that regardless. Here's how that looks: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize); $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); And the neat thing is that - without any modification to our server-side code - we can modify the above jQuery call to request the comments be sorted by author: $(function () { //--------------------------------------------------------- // Using Queryable to page //--------------------------------------------------------- $("#getCommentsQueryable").click(function () { viewModel.comments([]); var pageSize = $('#pageSize').val(); var pageIndex = $('#pageIndex').val(); var url = "/api/comments?$top=" + pageSize + '&$skip=' + (pageIndex * pageSize) + '&$orderby=Author'; $.getJSON(url, function (data) { // Update the Knockout model (and thus the UI) with the comments received back // from the Web API call. viewModel.comments(data); }); return false; }); }); So if you want to make use of OData query syntax, you can. If you don't like it, you're free to hook up your filtering and paging however you think is best. Neat. In Part 5, we'll add on support for Data Annotation based validation using an Action Filter.

Read the article

Auto DOP and Concurrency

- by jean-pierre.dijcks

After spending some time in the cloud, I figured it is time to come down to earth and start discussing some of the new Auto DOP features some more. As Database Machines (the v2 machine runs Oracle Database 11.2) are effectively selling like hotcakes, it makes some sense to talk about the new parallel features in more detail. For basic understanding make sure you have read the initial post. The focus there is on Auto DOP and queuing, which is to some extend the focus here. But now I want to discuss the concurrency a little and explain some of the relevant parameters and their impact, specifically in a situation with concurrency on the system. The goal of Auto DOP The idea behind calculating the Automatic Degree of Parallelism is to find the highest possible DOP (ideal DOP) that still scales. In other words, if we were to increase the DOP even more above a certain DOP we would see a tailing off of the performance curve and the resource cost / performance would become less optimal. Therefore the ideal DOP is the best resource/performance point for that statement. The goal of Queuing On a normal production system we should see statements running concurrently. On a Database Machine we typically see high concurrency rates, so we need to find a way to deal with both high DOP’s and high concurrency. Queuing is intended to make sure we Don’t throttle down a DOP because other statements are running on the system Stay within the physical limits of a system’s processing power Instead of making statements go at a lower DOP we queue them to make sure they will get all the resources they want to run efficiently without trashing the system. The theory – and hopefully – practice is that by giving a statement the optimal DOP the sum of all statements runs faster with queuing than without queuing. Increasing the Number of Potential Parallel Statements To determine how many statements we will consider running in parallel a single parameter should be looked at. That parameter is called PARALLEL_MIN_TIME_THRESHOLD. The default value is set to 10 seconds. So far there is nothing new here…, but do realize that anything serial (e.g. that stays under the threshold) goes straight into processing as is not considered in the rest of this post. Now, if you have a system where you have two groups of queries, serial short running and potentially parallel long running ones, you may want to worry only about the long running ones with this parallel statement threshold. As an example, lets assume the short running stuff runs on average between 1 and 15 seconds in serial (and the business is quite happy with that). The long running stuff is in the realm of 1 – 5 minutes. It might be a good choice to set the threshold to somewhere north of 30 seconds. That way the short running queries all run serial as they do today (if it ain’t broken, don’t fix it) and allows the long running ones to be evaluated for (higher degrees of) parallelism. This makes sense because the longer running ones are (at least in theory) more interesting to unleash a parallel processing model on and the benefits of running these in parallel are much more significant (again, that is mostly the case). Setting a Maximum DOP for a Statement Now that you know how to control how many of your statements are considered to run in parallel, lets talk about the specific degree of any given statement that will be evaluated. As the initial post describes this is controlled by PARALLEL_DEGREE_LIMIT. This parameter controls the degree on the entire cluster and by default it is CPU (meaning it equals Default DOP). For the sake of an example, let’s say our Default DOP is 32. Looking at our 5 minute queries from the previous paragraph, the limit to 32 means that none of the statements that are evaluated for Auto DOP ever runs at more than DOP of 32. Concurrently Running a High DOP A basic assumption about running high DOP statements at high concurrency is that you at some point in time (and this is true on any parallel processing platform!) will run into a resource limitation. And yes, you can then buy more hardware (e.g. expand the Database Machine in Oracle’s case), but that is not the point of this post… The goal is to find a balance between the highest possible DOP for each statement and the number of statements running concurrently, but with an emphasis on running each statement at that highest efficiency DOP. The PARALLEL_SERVER_TARGET parameter is the all important concurrency slider here. Setting this parameter to a higher number means more statements get to run at their maximum parallel degree before queuing kicks in. PARALLEL_SERVER_TARGET is set per instance (so needs to be set to the same value on all 8 nodes in a full rack Database Machine). Just as a side note, this parameter is set in processes, not in DOP, which equates to 4* Default DOP (2 processes for a DOP, default value is 2 * Default DOP, hence a default of 4 * Default DOP). Let’s say we have PARALLEL_SERVER_TARGET set to 128. With our limit set to 32 (the default) we are able to run 4 statements concurrently at the highest DOP possible on this system before we start queuing. If these 4 statements are running, any next statement will be queued. To run a system at high concurrency the PARALLEL_SERVER_TARGET should be raised from its default to be much closer (start with 60% or so) to PARALLEL_MAX_SERVERS. By using both PARALLEL_SERVER_TARGET and PARALLEL_DEGREE_LIMIT you can control easily how many statements run concurrently at good DOPs without excessive queuing. Because each workload is a little different, it makes sense to plan ahead and look at these parameters and set these based on your requirements.

Read the article

Plan Caching and Query Memory Part I – When not to use stored procedure or other plan caching mechanisms like sp_executesql or prepared statement

- by sqlworkshops

The most common performance mistake SQL Server developers make: SQL Server estimates memory requirement for queries at compilation time. This mechanism is fine for dynamic queries that need memory, but not for queries that cache the plan. With dynamic queries the plan is not reused for different set of parameters values / predicates and hence different amount of memory can be estimated based on different set of parameter values / predicates. Common memory allocating queries are that perform Sort and do Hash Match operations like Hash Join or Hash Aggregation or Hash Union. This article covers Sort with examples. It is recommended to read Plan Caching and Query Memory Part II after this article which covers Hash Match operations. When the plan is cached by using stored procedure or other plan caching mechanisms like sp_executesql or prepared statement, SQL Server estimates memory requirement based on first set of execution parameters. Later when the same stored procedure is called with different set of parameter values, the same amount of memory is used to execute the stored procedure. This might lead to underestimation / overestimation of memory on plan reuse, overestimation of memory might not be a noticeable issue for Sort operations, but underestimation of memory will lead to spill over tempdb resulting in poor performance. This article covers underestimation / overestimation of memory for Sort. Plan Caching and Query Memory Part II covers underestimation / overestimation for Hash Match operation. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance. To read additional articles I wrote click here. In most cases it is cheaper to pay for the compilation cost of dynamic queries than huge cost for spill over tempdb, unless memory requirement for a stored procedure does not change significantly based on predicates. The best way to learn is to practice. To create the below tables and reproduce the behavior, join the mailing list by using this link: www.sqlworkshops.com/ml and I will send you the table creation script. Most of these concepts are also covered in our webcasts: www.sqlworkshops.com/webcasts Enough theory, let’s see an example where we sort initially 1 month of data and then use the stored procedure to sort 6 months of data. Let’s create a stored procedure that sorts customers by name within certain date range. --Example provided by www.sqlworkshops.com create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c where c.CreationDate between @CreationDateFrom and @CreationDateTo order by c.CustomerName option (maxdop 1) end go Let’s execute the stored procedure initially with 1 month date range. set statistics time on go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-31' go The stored procedure took 48 ms to complete. The stored procedure was granted 6656 KB based on 43199.9 rows being estimated. The estimated number of rows, 43199.9 is similar to actual number of rows 43200 and hence the memory estimation should be ok. There was no Sort Warnings in SQL Profiler. Now let’s execute the stored procedure with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 679 ms to complete. The stored procedure was granted 6656 KB based on 43199.9 rows being estimated. The estimated number of rows, 43199.9 is way different from the actual number of rows 259200 because the estimation is based on the first set of parameter value supplied to the stored procedure which is 1 month in our case. This underestimation will lead to sort spill over tempdb, resulting in poor performance. There was Sort Warnings in SQL Profiler. To monitor the amount of data written and read from tempdb, one can execute select num_of_bytes_written, num_of_bytes_read from sys.dm_io_virtual_file_stats(2, NULL) before and after the stored procedure execution, for additional information refer to the webcast: www.sqlworkshops.com/webcasts. Let’s recompile the stored procedure and then let’s first execute the stored procedure with 6 month date range. In a production instance it is not advisable to use sp_recompile instead one should use DBCC FREEPROCCACHE (plan_handle). This is due to locking issues involved with sp_recompile, refer to our webcasts for further details. exec sp_recompile CustomersByCreationDate go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go Now the stored procedure took only 294 ms instead of 679 ms. The stored procedure was granted 26832 KB of memory. The estimated number of rows, 259200 is similar to actual number of rows of 259200. Better performance of this stored procedure is due to better estimation of memory and avoiding sort spill over tempdb. There was no Sort Warnings in SQL Profiler. Now let’s execute the stored procedure with 1 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-31' go The stored procedure took 49 ms to complete, similar to our very first stored procedure execution. This stored procedure was granted more memory (26832 KB) than necessary memory (6656 KB) based on 6 months of data estimation (259200 rows) instead of 1 month of data estimation (43199.9 rows). This is because the estimation is based on the first set of parameter value supplied to the stored procedure which is 6 months in this case. This overestimation did not affect performance, but it might affect performance of other concurrent queries requiring memory and hence overestimation is not recommended. This overestimation might affect performance Hash Match operations, refer to article Plan Caching and Query Memory Part II for further details. Let’s recompile the stored procedure and then let’s first execute the stored procedure with 2 day date range. exec sp_recompile CustomersByCreationDate go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-02' go The stored procedure took 1 ms. The stored procedure was granted 1024 KB based on 1440 rows being estimated. There was no Sort Warnings in SQL Profiler. Now let’s execute the stored procedure with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 955 ms to complete, way higher than 679 ms or 294ms we noticed before. The stored procedure was granted 1024 KB based on 1440 rows being estimated. But we noticed in the past this stored procedure with 6 month date range needed 26832 KB of memory to execute optimally without spill over tempdb. This is clear underestimation of memory and the reason for the very poor performance. There was Sort Warnings in SQL Profiler. Unlike before this was a Multiple pass sort instead of Single pass sort. This occurs when granted memory is too low. Intermediate Summary: This issue can be avoided by not caching the plan for memory allocating queries. Other possibility is to use recompile hint or optimize for hint to allocate memory for predefined date range. Let’s recreate the stored procedure with recompile hint. --Example provided by www.sqlworkshops.com drop proc CustomersByCreationDate go create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c where c.CreationDate between @CreationDateFrom and @CreationDateTo order by c.CustomerName option (maxdop 1, recompile) end go Let’s execute the stored procedure initially with 1 month date range and then with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-30' exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 48ms and 291 ms in line with previous optimal execution times. The stored procedure with 1 month date range has good estimation like before. The stored procedure with 6 month date range also has good estimation and memory grant like before because the query was recompiled with current set of parameter values. The compilation time and compilation CPU of 1 ms is not expensive in this case compared to the performance benefit. Let’s recreate the stored procedure with optimize for hint of 6 month date range. --Example provided by www.sqlworkshops.com drop proc CustomersByCreationDate go create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c where c.CreationDate between @CreationDateFrom and @CreationDateTo order by c.CustomerName option (maxdop 1, optimize for (@CreationDateFrom = '2001-01-01', @CreationDateTo ='2001-06-30')) end go Let’s execute the stored procedure initially with 1 month date range and then with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-30' exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 48ms and 291 ms in line with previous optimal execution times. The stored procedure with 1 month date range has overestimation of rows and memory. This is because we provided hint to optimize for 6 months of data. The stored procedure with 6 month date range has good estimation and memory grant because we provided hint to optimize for 6 months of data. Let’s execute the stored procedure with 12 month date range using the currently cashed plan for 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-12-31' go The stored procedure took 1138 ms to complete. 2592000 rows were estimated based on optimize for hint value for 6 month date range. Actual number of rows is 524160 due to 12 month date range. The stored procedure was granted enough memory to sort 6 month date range and not 12 month date range, so there will be spill over tempdb. There was Sort Warnings in SQL Profiler. As we see above, optimize for hint cannot guarantee enough memory and optimal performance compared to recompile hint. This article covers underestimation / overestimation of memory for Sort. Plan Caching and Query Memory Part II covers underestimation / overestimation for Hash Match operation. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance. Summary: Cached plan might lead to underestimation or overestimation of memory because the memory is estimated based on first set of execution parameters. It is recommended not to cache the plan if the amount of memory required to execute the stored procedure has a wide range of possibilities. One can mitigate this by using recompile hint, but that will lead to compilation overhead. However, in most cases it might be ok to pay for compilation rather than spilling sort over tempdb which could be very expensive compared to compilation cost. The other possibility is to use optimize for hint, but in case one sorts more data than hinted by optimize for hint, this will still lead to spill. On the other side there is also the possibility of overestimation leading to unnecessary memory issues for other concurrently executing queries. In case of Hash Match operations, this overestimation of memory might lead to poor performance. When the values used in optimize for hint are archived from the database, the estimation will be wrong leading to worst performance, so one has to exercise caution before using optimize for hint, recompile hint is better in this case. I explain these concepts with detailed examples in my webcasts (www.sqlworkshops.com/webcasts), I recommend you to watch them. The best way to learn is to practice. To create the above tables and reproduce the behavior, join the mailing list at www.sqlworkshops.com/ml and I will send you the relevant SQL Scripts. Register for the upcoming 3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop in London, United Kingdom during March 15-17, 2011, click here to register / Microsoft UK TechNet.These are hands-on workshops with a maximum of 12 participants and not lectures. For consulting engagements click here. Disclaimer and copyright information:This article refers to organizations and products that may be the trademarks or registered trademarks of their various owners. Copyright of this article belongs to R Meyyappan / www.sqlworkshops.com. You may freely use the ideas and concepts discussed in this article with acknowledgement (www.sqlworkshops.com), but you may not claim any of it as your own work. This article is for informational purposes only; you use any of the suggestions given here entirely at your own risk. R Meyyappan [email protected] LinkedIn: http://at.linkedin.com/in/rmeyyappan

Read the article

June 2013 Release of the Ajax Control Toolkit

- by Stephen.Walther

I’m happy to announce the June 2013 release of the Ajax Control Toolkit. For this release, we enhanced the AjaxFileUpload control to support uploading files directly to Windows Azure. We also improved the SlideShow control by adding support for CSS3 animations. You can get the latest release of the Ajax Control Toolkit by visiting the project page at CodePlex (http://AjaxControlToolkit.CodePlex.com). Alternatively, you can execute the following NuGet command from the Visual Studio Library Package Manager window: Uploading Files to Azure The AjaxFileUpload control enables you to efficiently upload large files and display progress while uploading. With this release, we’ve added support for uploading large files directly to Windows Azure Blob Storage (You can continue to upload to your server hard drive if you prefer). Imagine, for example, that you have created an Azure Blob Storage container named pictures. In that case, you can use the following AjaxFileUpload control to upload to the container: <toolkit:ToolkitScriptManager runat="server" /> <toolkit:AjaxFileUpload ID="AjaxFileUpload1" StoreToAzure="true" AzureContainerName="pictures" runat="server" /> Notice that the AjaxFileUpload control is declared with two properties related to Azure. The StoreToAzure property causes the AjaxFileUpload control to upload a file to Azure instead of the local computer. The AzureContainerName property points to the blob container where the file is uploaded. .int3{position:absolute;clip:rect(487px,auto,auto,444px);}SMALL cash advance VERY CHEAP To use the AjaxFileUpload control, you need to modify your web.config file so it contains some additional settings. You need to configure the AjaxFileUpload handler and you need to point your Windows Azure connection string to your Blob Storage account. <configuration> <appSettings>  <add key="AjaxFileUploadAzureConnectionString" value="DefaultEndpointsProtocol=https;AccountName=testact;AccountKey=RvqL89Iw4npvPlAAtpOIPzrinHkhkb6rtRZmD0+ojZupUWuuAVJRyyF/LIVzzkoN38I4LSr8qvvl68sZtA152A=="/> </appSettings> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> You supply the connection string for your Azure Blob Storage account with the AjaxFileUploadAzureConnectionString property. If you set the value “UseDevelopmentStorage=true” then the AjaxFileUpload will upload to the simulated Blob Storage on your local machine. After you create the necessary configuration settings, you can use the AjaxFileUpload control to upload files directly to Azure (even very large files). Here’s a screen capture of how the AjaxFileUpload control appears in Google Chrome: After the files are uploaded, you can view the uploaded files in the Windows Azure Portal. You can see that all 5 files were uploaded successfully: New AjaxFileUpload Events In response to user feedback, we added two new events to the AjaxFileUpload control (on both the server and the client): · UploadStart – Raised on the server before any files have been uploaded. · UploadCompleteAll – Raised on the server when all files have been uploaded. · OnClientUploadStart – The name of a function on the client which is called before any files have been uploaded. · OnClientUploadCompleteAll – The name of a function on the client which is called after all files have been uploaded. These new events are most useful when uploading multiple files at a time. The updated AjaxFileUpload sample page demonstrates how to use these events to show the total amount of time required to upload multiple files (see the AjaxFileUpload.aspx file in the Ajax Control Toolkit sample site). SlideShow Animated Slide Transitions With this release of the Ajax Control Toolkit, we also added support for CSS3 animations to the SlideShow control. The animation is used when transitioning from one slide to another. Here’s the complete list of animations: · FadeInFadeOut · ScaleX · ScaleY · ZoomInOut · Rotate · SlideLeft · SlideDown You specify the animation which you want to use by setting the SlideShowAnimationType property. For example, here is how you would use the Rotate animation when displaying a set of slides: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowSlideShow.aspx.cs" Inherits="TestACTJune2013.ShowSlideShow" %> <%@ Register TagPrefix="toolkit" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <script runat="Server" type="text/C#"> [System.Web.Services.WebMethod] [System.Web.Script.Services.ScriptMethod] public static AjaxControlToolkit.Slide[] GetSlides() { return new AjaxControlToolkit.Slide[] { new AjaxControlToolkit.Slide("slides/Blue hills.jpg", "Blue Hills", "Go Blue"), new AjaxControlToolkit.Slide("slides/Sunset.jpg", "Sunset", "Setting sun"), new AjaxControlToolkit.Slide("slides/Winter.jpg", "Winter", "Wintery..."), new AjaxControlToolkit.Slide("slides/Water lilies.jpg", "Water lillies", "Lillies in the water"), new AjaxControlToolkit.Slide("slides/VerticalPicture.jpg", "Sedona", "Portrait style picture") }; } </script> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="Rotate" runat="server" /> </div> </form> </body> </html> In the code above, the set of slides is exposed by a page method named GetSlides(). The SlideShowAnimationType property is set to the value Rotate. The following animated GIF gives you an idea of the resulting slideshow: If you want to use either the SlideDown or SlideRight animations, then you must supply both an explicit width and height for the Image control which is the target of the SlideShow extender. For example, here is how you would declare an Image and SlideShow control to use a SlideRight animation: <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Width="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="SlideRight" runat="server" /> Notice that the Image control includes both a Height and Width property. Here’s an approximation of this animation using an animated GIF: Summary The Superexpert team worked hard on this release. We hope you like the new improvements to both the AjaxFileUpload and the SlideShow controls. We’d love to hear your feedback in the comments. On to the next sprint!

Read the article

FBX 3ds max export, bad vertices

- by instancedName

I need to import model in OpenGL via Fbx SdK, and for testing purposes I created a simple box centered in the (0, 0, 0), length 3, in 3ds max. Here's the image: But when i exported it, and imported in the OpenGL it wasn't in the center. Then I exported it in ASCII format, and opened the file in Notepad, and really Z coordinates were 0, and 3. When I converted model to editable mesh and checked every vertex in 3ds max it had expected (+-1.5, +-1.5, +-1.5) coordinates. Can anyone help me with this one? I'm really stuck. I tried to change whole bunch of parameters in 3ds max export, but every time it changes Z koordinate.

Read the article

Box2D Static-Dynamic body joint eliminates collisions

- by andrewz

I have a static body A, and a dynamic body B, and a dynamic body C. A is filtered to not collide with anything, B and C collide with each other. I wish to create a joint between B and A. When I create a joint (ex. revolute), B no longer collides with C - C passes through it as if it does not exist. What am I doing wrong? How can adding a joint prevent a body from colliding with another body it used to? EDIT: I want to join B with A, and have B collide with C, but not A collide with C. In realistic terms, I'm trying to create a revolute joint between a wheel (B) and a wall (A), and have a box (C) hit the wheel and the wheel would then rotate. EDIT: I create a the simplest revolute joint I can with these parameters (C++): b2RevoluteJointDef def; def.Initialize(A, B, B -> GetWorldCenter()); world -> CreateJoint(&def);

Read the article

Expected sprint completion rate and load in scrum?

- by bjarkef

Recently at work there have been increased focus on completion rate and load on the developers in our sprints. With completion rate I mean, if we plan 20 user stories for a sprint, what percentage of these user stories are closed at the end of the sprint. And with load I mean, if we have a sprint with 3 developers of 60 hours each, i.e. 180 hours for the sprint, how many hours worth of user stories do we schedule for the sprint. So I am really interested in others experience with this, I guess this is something everybody working with scrum deals with. My question is, what completion rate and load are expected/usual, and how are your team doing with respect to these parameters?

Read the article

Python 3.4 adds re.fullmatch()

- by Jan Goyvaerts

Python 3.4 does not bring any changes to its regular expression syntax compared to previous 3.x releases. It does add one new function to the re module called fullmatch(). This function takes a regular expression and a subject string as its parameters. It returns True if the regular expression can match the string entirely. It returns False if the string cannot be matched or if it can only be matched partially. This is useful when using a regular expression to validate user input. Do note that fullmatch() will return True if the subject string is the empty string and the regular expression can find zero-length matches. A zero-length match of a zero-length string is a complete match. So if you want to check whether the user entered a sequence of digits, use \d+ rather than \d* as the regex.

Read the article

Shadow-mapping xna

- by Kurt Ricci

I've been trying to implement shadows in my game and I've been following quite a few tutorials online, mainly Riemers, but I'm always getting the same 2 errors when I'm drawing my models and setting the parameters from the effect file. The errors are: This method does not accept null for this parameter. Parameter name: value and Object reference not set to an instance of an object. So I've then downloaded a sample and just replaced my model with the one found in the sample and the same errors occur. I this find very strange as it works with his model. I'm wondering if the problem is with my models (I made them myself). Here's the code where the errors occur (they start to occur after the second foreach loop). Any help would be greatly appreciated, thanks.

Read the article

Best way to throw exception and avoid code duplication

- by JF Dion

I am currently writing code and want to make sure all the params that get passed to a function/method are valid. Since I am writing in PHP I don't have access to all the facilities of other languages like C, C++ or Java to check for parameters values and types public function inscriptionExists($sectionId, $userId) // PHP vs. public boolean inscriptionExists(int sectionId, int userId) // Java So I have to rely on exceptions if I want to make sure that my params are both integers. Since I have a lot of places where I need to check for param validity, what would be the best way to create a validation/exception machine and avoid code duplication? I was thinking on a static factory (since I don't want to pass it to all of my classes) with a signature like: public static function factory ($value, $valueType, $exceptionType = 'InvalidArgumentException'); Which would then call the right sub process to validate based on the type. Am I on the right way, or am I going completely off the road and overthinking my problem?

Search Results

Search found 12184 results on 488 pages for 'named parameters'.

Page 194/488 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201 | Next Page >

- by Marek

- by Tim Dexter

- by hajan

- by simonsabin

- by Stefan Krantz

- by Timmy Kokke

- by Maria Zakourdaev

- by Chathuranga

- by Shaun

- by Usman Ismail

- by Manoj Madhusoodanan

- by Kelly Jones

- by vishal.s.jain(at)oracle.com

- by Elke Phelps (Oracle Development)

- by Pinal Dave

- by Jon Galloway

- by jean-pierre.dijcks

- by sqlworkshops

- by Stephen.Walther

- by instancedName

- by andrewz

- by bjarkef

- by Jan Goyvaerts

- by Kurt Ricci

- by JF Dion

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201 | Next Page >