Search Results

Search found 27403 results on 1097 pages for 'nova sql'.

Page 194/1097 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

  • Display a Photo Gallery using Asp.Net and SQL

    - by sweetcoder
    I have recently added photos to my SQL database and have displayed them on an *.aspx page using Asp:Image. The ImageUrl for this control stored in a separate *.aspx page. It works great for profile pictures. I have a new issue at hand. I need each user to be able to have their own photo gallery page. I want the photos to be stored in the sql database. Storing the photos is not difficult. The issue is displaying the photos. I want the photos to be stored in a thumbnail grid fashion, when the user clicks on the photo, it should bring up the photo on a separate page. What is the best way to do this. Obviously it is not to use Asp:Image. I am curious if I should use a Gridview. If so, how do I do that and should their be a thumbnail size stored in the database for this? Once the picture is click on how does the other page look so that it displays the correct image. I would think it is not correct to send the photoId through the url. Below is code from the page I use to display profile pictures. protected void Page_Load(object sender, EventArgs e) { string sql = "SELECT [ProfileImage] FROM [UserProfile] WHERE [UserId] = '" + User.Identity.Name.ToString() + "'"; string strCon = System.Web.Configuration.WebConfigurationManager.ConnectionStrings["SocialSiteConnectionString"].ConnectionString; SqlConnection conn = new SqlConnection(strCon); SqlCommand comm = new SqlCommand(sql, conn); conn.Open(); Response.ContentType = "image/jpeg"; Response.BinaryWrite((byte[])comm.ExecuteScalar()); conn.Close(); }

    Read the article

  • Issues Connecting to SQLExpress using Oracle SQL Developer

    - by ArtDeveloper
    Hey Guys, I'm trying to create a connection inside Oracle SQL Developer to a SQLExpress database I have Everything I have resides on the same machine so there isn't any network issues I should have to deal with but everytime I follow the instructions and I try to connect I get the following message "Failure - Unable to get information from SQL Server: localhost." I can connect to the SQLExpress DB using the SQL Management Studio and through an ODBC connection. I've installed the third party extensions and I've enabled the TCP protocol on the SQL Server Configuration manager as well as enabled the IP Addresses I'm assuming that the SQLExpress Database is on port 1433 because I didn't change this when I installed but if someone can tell me how to double check that I would appreciate that info as well. I setup the new connection with the following information name: databasename I'm using windows authentication so the username and password aren't filled in host:localhost port:1433/databasename;instance=SQLEXPRESS *databasename - this is replaced with the actual DB name I've just changed the name here to protect the innocent I've spent about a full day on this trying to get it connected and many google attempts where other ppl have had this issue but have gotten it solved through various methods that I've tried and it hasn't resolved my issue. Any information would be much appreciated Thank you in Advance, AD

    Read the article

  • WCF fault logging and SQL Exception 4060 error.

    - by Bill
    I have been attempting to compile/run a sample WCF application from Juval Lowy's website (author of Programming WCF Services & founder of IDesign) for several days. The example app utilizes Juval's ServiceModelEx library which logs faults/errors to a "WCFLogbook" SQL database. Unfortunately, when the sample app faults, I get the following error: SQL Exception 4060: "Cannot open database \"WCFLogbook\" requested by the login. The login failed.\r\nLogin failed for user 'Bill-PC\Bill'." I confirmed that the SQL WCFLogbook database has been created and have granted all of the appropriate permissions for my (Bill-PC\Bill) access to the database. Additionally port 8006 and port 1433 have been opened in the Firewall. TCP/IP has been enabled and "Allow remote connections to this server" has been checked. I am using the following endpoint within the App.Config file: <client> <endpoint name="LogbookTCP" address="net.tcp://Bill-PC:8006/LogbookManager" binding="netTcpBinding" contract="ILogbookManager" /> </client> Unfortunately SQL is a 'world' that I hadn't needed to venture into before now and I am terribly frustrated with my lack of success. Would anyone have any other suggestions on how to get this working? Have I missed anything?

    Read the article

  • Can't connect to SQL Server 2008 - looks like Shared Memory problem

    - by Proposition Joe
    I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest).

    Read the article

  • Package creation issues using SQL Developer

    - by Carter
    So I've never worked with stored procedures and have not a whole lot of DB experience in general and I've been assigned a task that requires I create a package and I'm stuck. Using SQL Developer, I'm trying to create a package called JUMPTO with this code... create or replace package JUMPTO is type t_locations is ref cursor; procedure procGetLocations(locations out t_locations); end JUMPTO; When I run it, it spits out this PL/SQL code block... DECLARE LOCATIONS APPLICATION.JUMPTO.t_locations; BEGIN JUMPTO.PROCGET_LOCATIONS( LOCATIONS = LOCATIONS ); -- Modify the code to output the variable -- DBMS_OUTPUT.PUT_LINE('LOCATIONS = ' || LOCATIONS); END; A tutorial I found said to take out the comment for that second line there. I've tried with and without the comment. When I hit "ok" I get the error... ORA-06550: line 2, column 32: PLS-00302: component 'JUMPTO' must be declared ORA-06550: line 2, column 13: PL/SQL: item ignored ORA-06550: line 6, column 18: PLS-00320: the declaration of the type of this expression is incomplete or malformed ORA-06550: line 5, column 3: PL/SQL: Statement ignored ORA-06512: at line 58 I really don't have any idea what's going on, this is all completely new territory for me. I tried creating a body that just selected some stuff from the database but nothing is working the way it seems like it should in my head. Can anyone give me any insight into this?

    Read the article

  • Replacing XML reserved characters in SQL Server 2005

    - by Barn
    I'm working on a system that takes relational data from a sql server DB and uses SSIS to produce an XML extract using sql server 2005's 'FOR XML PATH' command and a schema. The problem lies with replacing the XML reserved characters. 'FOR XML PATH' is only replacing <, , and &, not ' and ", so I need a way of replacing these myself. I've tried pre-processing the fields in the database to replace XML reserved characters with their entitised equivalents (e.g. & becomes &amp;), but once these fields are used to construct XML using FOR XML the leading & is replaced with &amp;, so I end up with &amp;amp; where I should have &amp;. What I've tried so far is altering the element's contents after the XML has been constructed using XQuery inside SQL server like so: DECLARE @data VARCHAR(MAX) SET @data = CONVERT(VARCHAR(MAX), [my xml column].query(' data(/root/node_i_want)') SELECT @data = [function to replace quotes etc](@data) SET [my xml column].modify('replace value of (/root/node_i_want)[1] with sql:variable("@data")') but I get the same problem. Essentially, is there something wrong I'm doing with the above, or a way to tell FOR XML to entitise other characters, or something like that? Basically anything short of having to write a program to change the XML after it has been assembled in large batches and saved to files!

    Read the article

  • Python: How to execute a SQL file or command

    - by Mestika
    Hi, I have this Python script: import sys import getopt import timeit import random import os import re import ibm_db import time from string import maketrans runs=5 queries=50 file = open("results.txt", "a") for r in range(5): print "Run %s\n" % r os.system("python reads.py -r1 -pquery1.sql -q50 -sespec") file.write('END QUERY READ 01') file.close() os.system("python query_read_02.py") Everything here is working, it is creating the results.txt file, it run the os.system("python reads.py...") file and that file is doing everything it's suppose to, but the problem comes when go and run the query_read_02.py file. In this file, it should execute a SQL command or a SQL file on my database, so I can create an index and see what the performance of that input is, but how do i do it? I create the connection to the database in the reads.py file, but it's hard to create the queries in there because I doesn't keep track of which file it has reached, it just execute commands from what the parameters are. I hope I've explained myself clear enough, otherwise please let me know. I just want to execute a SQL command or file which each query_read_0x.py file. Sincerely Mestika

    Read the article

  • Cannot connect to database,.Login failed for user

    - by kishorejangid
    Yesterday my database was connected perfectly.. We have installed Windows Server 2008 R2 on our server and the i have added the user to the client PC name SMTECH5 with user jangid Now my database is not connecting using windows authentication. only the master database is connecting.. here are somw of the error throwned TITLE: Connect to Database Engine Cannot connect to SMTECH5\COLLEGEERP. ADDITIONAL INFORMATION: Cannot open user default database. Login failed. Login failed for user 'SMTECH\jangid'. (Microsoft SQL Server, Error: 4064) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=4064&LinkId=20476 BUTTONS: OK TITLE: Connect to Database Engine Cannot connect to SMTECH5\COLLEGEERP. ADDITIONAL INFORMATION: Cannot open user default database. Login failed. Login failed for user 'SMTECH\jangid'. (Microsoft SQL Server, Error: 4064) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=4064&LinkId=20476 BUTTONS: OK this happens on all the pcs in our lab

    Read the article

  • Automation Error when exporting Excel data to SQL Server

    - by brohjoe
    I'm getting an Automation error upon running VBA code in Excel 2007. I'm attempting to connect to a remote SQL Server DB and load data to from Excel to SQL Server. The error I get is, "Run-time error '-2147217843(80040e4d)': Automation error". I checked out the MSDN site and it suggested that this may be due to a bug associated with the sqloledb provider and one way to mitigate this is to use ODBC. Well I changed the connection string to reflect ODBC provider and associated parameters and I'm still getting the same error. Here is the code with ODBC as the provider: Dim cnt As ADODB.Connection Dim rst As ADODB.Recordset Dim stSQL As String Dim wbBook As Workbook Dim wsSheet As Worksheet Dim rnStart As Range Public Sub loadData() 'This was set up using Microsoft ActiveX Data Components version 6.0. 'Create ADODB connection object, open connection and construct the connection string object. Set cnt = New ADODB.Connection cnt.ConnectionString = "Driver={SQL Server}; Server=onlineSQLServer2010.foo.com; Database=fooDB;Uid=logonalready;Pwd='helpmeOB1';" cnt.Open On Error GoTo ErrorHandler 'Open Excel and run query to export data to SQL Server. strSQL = "SELECT * INTO SalesOrders FROM OPENDATASOURCE('Microsoft.ACE.OLEDB.12.0'," & _ "'Data Source=C:\Database.xlsx; Extended Properties=Excel 12.0')...[SalesOrders$]" cnt.Execute (strSQL) 'Error handling. ErrorExit: 'Reclaim memory from the connection objects Set rst = Nothing Set cnt = Nothing Exit Sub ErrorHandler: MsgBox Err.Description, vbCritical Resume ErrorExit 'clean up and reclaim memory resources. If CBool(cnt.State And adStateOpen) Then Set rst = Nothing Set cnt = Nothing cnt.Close End If End Sub

    Read the article

  • Impact of ordering of correlated subqueries within a projection

    - by Michael Petito
    I'm noticing something a bit unexpected with how SQL Server (SQL Server 2008 in this case) treats correlated subqueries within a select statement. My assumption was that a query plan should not be affected by the mere order in which subqueries (or columns, for that matter) are written within the projection clause of the select statement. However, this does not appear to be the case. Consider the following two queries, which are identical except for the ordering of the subqueries within the CTE: --query 1: subquery for Color is second WITH vw AS ( SELECT p.[ID], (SELECT TOP(1) [FirstName] FROM [Preference] WHERE p.ID = ID AND [FirstName] IS NOT NULL ORDER BY [LastModified] DESC) [FirstName], (SELECT TOP(1) [Color] FROM [Preference] WHERE p.ID = ID AND [Color] IS NOT NULL ORDER BY [LastModified] DESC) [Color] FROM Person p ) SELECT ID, Color, FirstName FROM vw WHERE Color = 'Gray'; --query 2: subquery for Color is first WITH vw AS ( SELECT p.[ID], (SELECT TOP(1) [Color] FROM [Preference] WHERE p.ID = ID AND [Color] IS NOT NULL ORDER BY [LastModified] DESC) [Color], (SELECT TOP(1) [FirstName] FROM [Preference] WHERE p.ID = ID AND [FirstName] IS NOT NULL ORDER BY [LastModified] DESC) [FirstName] FROM Person p ) SELECT ID, Color, FirstName FROM vw WHERE Color = 'Gray'; If you look at the two query plans, you'll see that an outer join is used for each subquery and that the order of the joins is the same as the order the subqueries are written. There is a filter applied to the result of the outer join for color, to filter out rows where the color is not 'Gray'. (It's odd to me that SQL would use an outer join for the color subquery since I have a non-null constraint on the result of the color subquery, but OK.) Most of the rows are removed by the color filter. The result is that query 2 is significantly cheaper than query 1 because fewer rows are involved with the second join. All reasons for constructing such a statement aside, is this an expected behavior? Shouldn't SQL server opt to move the filter as early as possible in the query plan, regardless of the order the subqueries are written?

    Read the article

  • Using LINQ to SQL and chained Replace

    - by White Dragon
    I have a need to replace multiple strings with others in a query from p in dx.Table where p.Field.Replace("A", "a").Replace("B", "b").ToLower() = SomeVar select p Which provides a nice single SQL statement with the relevant REPLACE() sql commands. All good :) I need to do this in a few queries around the application... So i'm looking for some help in this regard; that will work as above as a single SQL hit/command on the server It seems from looking around i can't use RegEx as there is no SQL eq Being a LINQ newbie is there a nice way for me to do this? eg is it possible to get it as a IQueryable "var result" say and pass that to a function to add needed .Replace()'s and pass back? Can i get a quick example of how if so? EDIT: This seems to work! does it look like it would be a problem? var data = from p in dx.Videos select p; data = AddReplacements(data, checkMediaItem); theitem = data.FirstOrDefault(); ... public IQueryable<Video> AddReplacements(IQueryable<Video> DataSet, string checkMediaItem) { return DataSet.Where(p => p.Title.Replace(" ", "-").Replace("&", "-").Replace("?", "-") == checkMediaItem); }

    Read the article

  • What is the difference between cubes and the Unified Dimensional Model (if any)?

    - by ngm
    I'm currently researching SQL Server 2008 as a business intelligence solution, and currently looking at Analysis Services (and I'm pretty new to business intelligence as a whole...) I'm a bit confused by some of the terms in SSAS, particularly the conceptual differences between cubes and MS's Unified Dimensional Model. I believe that a cube in SSAS is basically an OLAP cube -- dimensions, measures, something that sits between the underlying data source and a business user. But then that's kind of what I understand UDM to be as well. The docs for SQL Server 2005 seem to suggest as much: "A cube is essentially synonymous with a Unified Dimensional Model (UDM)". But then the SQL Server 2008 pages sort of suggest that UDM is a wrapper for both multidimensional data (cubes) and relational data: "Use the Unified Dimensional Model to provide one consolidated business view for relational and multidimensional data that includes business entities, business logic, calculations, and metrics." This blog post suggests similarly: "UDM provides a single dimensional model for all OLAP analysis and relational reporting needs. So you can use either MDX or SQL" Is UDM something that sits above cubes? Or are they the same thing? I presume I would develop cubes with the Cube Designer application; what would I develop a UDM with?

    Read the article

  • Show me your Linq to SQL architectures!

    - by Brad Heller
    I've been using Linq to SQL for a new implementation that I've been working on. I have about 5000 lines of code and am a little ways from a solid demo. I've been pretty satisfied with Linq to SQL so far -- the tools are excellent and pretty painless and it allows you to get a DAL up and running quickly. That said, there are some major draw backs that I just keep hitting over and over again. Namely how to handle separation of concerns between my DAL and my business layer and juggling that with different data contexts. Here is the architecture I've been using: My repositories do all my data access and they return Linq to SQL objects. Each of my Linq to SQL objects implements an IDetachable interface. A typical implementation looks like this: partial class PaymentDetail : IDetachable { #region IDetachable Members public bool IsAttached { get { return PropertyChanging != null; } } public void Detach() { if (IsAttached) { PropertyChanged = null; PropertyChanging = null; Transaction.Detach(); } } #endregion } Every time I do a DAL operation in my repository I "detach" when I'm done with the object (and it should theoretically detach from any child objects) to remove the DataContext's context. Like I said, this works pretty well, but there are some edge cases that seem to be a big pain in the ass. For instance, my Transaction object has many PaymentDetails. Even when there are no PaymentDetails in that collection it's still attached to the DataContext's context! Thus, if I try to update (I update by Attach()ing to the object and then SubmitChanges()) I get that dreaded "An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported." message. Anyway, I'm starting to doubt that this technology was a good gamble. Has anyone got a decent architecture that they're willing to share? I'd really love to use this technology but I feel like I spend 1/3 of my time just debugging is retarded quirks!

    Read the article

  • Can I spread out a long running stored proc accross multiple CPU's?

    - by Russ
    [Also on SuperUser - http://superuser.com/questions/116600/can-i-spead-out-a-long-running-stored-proc-accross-multiple-cpus] I have a stored procedure in SQL server the gets, and decrypts a block of data. ( Credit cards in this case. ) Most of the time, the performance is tolerable, but there are a couple customers where the process is painfully slow, taking literally 1 minute to complete. ( Well, 59377ms to return from SQL Server to be exact, but it can vary by a few hundred ms based on load ) When I watch the process, I see that SQL is only using a single proc to perform the whole process, and typically only proc 0. Is there a way I can change my stored proc so that SQL can multi-thread the process? Is it even feasible to cheat and to break the calls in half, ( top 50%, bottom 50% ), and spread the load, as a gross hack? ( just spit-balling here ) My stored proc: USE [Commerce] GO /****** Object: StoredProcedure [dbo].[GetAllCreditCardsByCustomerId] Script Date: 03/05/2010 11:50:14 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[GetAllCreditCardsByCustomerId] @companyId UNIQUEIDENTIFIER, @DecryptionKey NVARCHAR (MAX) AS SET NoCount ON DECLARE @cardId uniqueidentifier DECLARE @tmpdecryptedCardData VarChar(MAX); DECLARE @decryptedCardData VarChar(MAX); DECLARE @tmpTable as Table ( CardId uniqueidentifier, DecryptedCard NVarChar(Max) ) DECLARE creditCards CURSOR FAST_FORWARD READ_ONLY FOR Select cardId from CreditCards where companyId = @companyId and Active=1 order by addedBy desc --2 OPEN creditCards --3 FETCH creditCards INTO @cardId -- prime the cursor WHILE @@Fetch_Status = 0 BEGIN --OPEN creditCards DECLARE creditCardData CURSOR FAST_FORWARD READ_ONLY FOR select convert(nvarchar(max), DecryptByCert(Cert_Id('Oh-Nay-Nay'), EncryptedCard, @DecryptionKey)) FROM CreditCardData where cardid = @cardId order by valueOrder OPEN creditCardData FETCH creditCardData INTO @tmpdecryptedCardData -- prime the cursor WHILE @@Fetch_Status = 0 BEGIN print 'CreditCardData' print @tmpdecryptedCardData set @decryptedCardData = ISNULL(@decryptedCardData, '') + @tmpdecryptedCardData print '@decryptedCardData' print @decryptedCardData; FETCH NEXT FROM creditCardData INTO @tmpdecryptedCardData -- fetch next END CLOSE creditCardData DEALLOCATE creditCardData insert into @tmpTable (CardId, DecryptedCard) values ( @cardId, @decryptedCardData ) set @decryptedCardData = '' FETCH NEXT FROM creditCards INTO @cardId -- fetch next END select CardId, DecryptedCard FROM @tmpTable CLOSE creditCards DEALLOCATE creditCards

    Read the article

  • Can I spread out a long running stored proc accross multiple CPU's?

    - by Russ
    [Also on SuperUser - http://superuser.com/questions/116600/can-i-spead-out-a-long-running-stored-proc-accross-multiple-cpus] I have a stored procedure in SQL server the gets, and decrypts a block of data. ( Credit cards in this case. ) Most of the time, the performance is tolerable, but there are a couple customers where the process is painfully slow, taking literally 1 minute to complete. ( Well, 59377ms to return from SQL Server to be exact, but it can vary by a few hundred ms based on load ) When I watch the process, I see that SQL is only using a single proc to perform the whole process, and typically only proc 0. Is there a way I can change my stored proc so that SQL can multi-thread the process? Is it even feasible to cheat and to break the calls in half, ( top 50%, bottom 50% ), and spread the load, as a gross hack? ( just spit-balling here ) My stored proc: USE [Commerce] GO /****** Object: StoredProcedure [dbo].[GetAllCreditCardsByCustomerId] Script Date: 03/05/2010 11:50:14 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[GetAllCreditCardsByCustomerId] @companyId UNIQUEIDENTIFIER, @DecryptionKey NVARCHAR (MAX) AS SET NoCount ON DECLARE @cardId uniqueidentifier DECLARE @tmpdecryptedCardData VarChar(MAX); DECLARE @decryptedCardData VarChar(MAX); DECLARE @tmpTable as Table ( CardId uniqueidentifier, DecryptedCard NVarChar(Max) ) DECLARE creditCards CURSOR FAST_FORWARD READ_ONLY FOR Select cardId from CreditCards where companyId = @companyId and Active=1 order by addedBy desc --2 OPEN creditCards --3 FETCH creditCards INTO @cardId -- prime the cursor WHILE @@Fetch_Status = 0 BEGIN --OPEN creditCards DECLARE creditCardData CURSOR FAST_FORWARD READ_ONLY FOR select convert(nvarchar(max), DecryptByCert(Cert_Id('Oh-Nay-Nay'), EncryptedCard, @DecryptionKey)) FROM CreditCardData where cardid = @cardId order by valueOrder OPEN creditCardData FETCH creditCardData INTO @tmpdecryptedCardData -- prime the cursor WHILE @@Fetch_Status = 0 BEGIN print 'CreditCardData' print @tmpdecryptedCardData set @decryptedCardData = ISNULL(@decryptedCardData, '') + @tmpdecryptedCardData print '@decryptedCardData' print @decryptedCardData; FETCH NEXT FROM creditCardData INTO @tmpdecryptedCardData -- fetch next END CLOSE creditCardData DEALLOCATE creditCardData insert into @tmpTable (CardId, DecryptedCard) values ( @cardId, @decryptedCardData ) set @decryptedCardData = '' FETCH NEXT FROM creditCards INTO @cardId -- fetch next END select CardId, DecryptedCard FROM @tmpTable CLOSE creditCards DEALLOCATE creditCards

    Read the article

  • Can someone copyright an SQL query?

    - by Samutz
    I work for a school district. Every year we have to export a list of students from our student management system and send it to a company that handles our online exams. So to do this export, we had to hire someone who knew the inner workings of our student management system. He wrote an sql (Adaptive Sybase SQL Anywhere) query to export the students to a csv file like we needed. This was before I started working for the district, so for a while I assumed this was an actually application, until it came time for me to do the export myself. And every year he charges us $500 to update this query to export the students for the current year. So when I discovered it was only a query (.bat file and .sql file), my thought was "I can update this myself". All I have to do is change the years in the query (eg. 2009 to 2010). The query (.sql file) itself has this comment at the top: // This code was writtend by [the guy] // and is the property of [his company]...Copyright 2005,2006,2008,2009 // This code MAY NOT BE USED without the expressed written consent of // [his company]. (Yes, it really does says "writtend".) So now my boss is worried that we're violating the copyright. And that the guy is gonna find out that I updated the query myself because we haven't asked him to update it this year and take legal action. So back to the subject's question: Can he really copyright this query? And if so, is modifying it ourselves a copyright violation? In my mind, a single query isn't program code. It's more a command line command. But I don't know what it's considered legally.

    Read the article

  • Need help in tuning a sql-query

    - by Viper
    Hello, i need some help to boost this SQL-Statement. The execution time is around 125ms. During the runtime of my program this sql (better: equally structured sqls for different tables) will be called 300.000 times. The average row count in the tables lies around 10.000.000 rows and new rows (updates/inserts) will be added with a timestamp each day. Data which are interesting for this particular export-program lies in the last 1-3 days. Maybe this is helpful for an index to create. The data i need is the current valid row for a given id and the forerunner datarow to get the updates (if exists). We use a Oracle 11g database and Dot.Net Framework 3.5 SQL-Statement to boost: select ID_SOMETHING, -- Number(12) ID_CONTRIBUTOR, -- Char(4 Byte) DATE_VALID_FROM, -- DATE DATE_VALID_TO -- DATE from TBL_SOMETHING XID where ID_SOMETHING = :ID_INSTRUMENT and ID_CONTRIBUTOR = :ID_CONTRIBUTOR and DATE_VALID_FROM <= :EXPORT_DATE and DATE_VALID_TO >= :EXPORT_DATE order by DATE_VALID_FROM asc; Here i uploaded the current Explain-Plan for this query. I'm not a database expert so i don't know which index-type would fit best for this requirement. I have seen that there are many different possible index-types which could be applied. Maybe Oracle Optimizer Hints are helpful, too. Does anyone has a good idea for tuning this sql or can point me in a right direction?

    Read the article

  • how to update the table in sql database from a Paradox DB table using delphi

    - by Sreenath Krishnakumar
    I am doing a project in Delphi6 which enables the user to update the table in SQL server database ; if there is any changes in the table of Paradox DB. An update button has been created and whenever the user clicks it, all the changes made in the paradox db table have to be updated in the SQL server table. Only if there is any changes the table need to be updated else ; it should close automatically. For that I have created a table, "Schedule" ,both in Paradox DB and SQL server. But I am stuck with this Paradox DB thing. Which component can I drop in the form for connecting the table in Paradox DB ? For SQL server I used ado table component. For this Paradox also can I use that ? I am not a regular programmer so I am not well versed this Delphi6 also. So I am seeking a help for this. Can anybody give me an example coding also ?

    Read the article

  • Translating Where() to sql

    - by MBoros
    Hi. I saw DamienG's article (http://damieng.com/blog/2009/06/24/client-side-properties-and-any-remote-linq-provider) in how to map client properties to sql. i ran throgh this article, and i saw great potential in it. Definitely mapping client properties to SQL is an awesome idea. But i wanted to use this for something a bit more complicated then just concatenating strings. Atm we are trying to introduce multilinguality to our Business objects, and i hoped we could leave all the existing linq2sql queries intact, and just change the code of the multilingual properties, so they would actually return the given property in the CurrentUICulture. The first idea was to change these fields to XMLs, and then try the Object.Property.Elements().Where(...), but it got stuck on the Elements(), as it couldnt translate it to sql. I read somewhere that XML fields are actually regarded as strings, and only on the app server they become XElements, so this way the filtering would be on the app server anyways, not the DB. Fair point, it wont work like this. Lets try something else... SO the second idea was to create a PolyGlots table (name taken from http://weblogic.sys-con.com/node/102698?page=0,1), a PolyGlotTranslations table and a Culture table, where the PolyGlots would be referenced from each internationalized property. This way i wanted to say for example: private static readonly CompiledExpression<Announcement, string> nameExpression = DefaultTranslationOf<Announcement> .Property(e => e.Name) .Is(e=> e.NamePolyGlot.PolyGlotTranslations .Where(t=> t.Culture.Code == Thread.CurrentThread.CurrentUICulture.Name) .Single().Value ); now unfortunately here i get an error that the Where() function cannot be translated to sql, what is a bit disappointing, as i was sure it will go through. I guess it is failing, cause the IEntitySet is basically an IEnumerable, not IQueryable, am i right? Is there another way to use the compiledExpressions class to achieve this goal? Any help appreciated.

    Read the article

  • Insert records using ExecuteNonQuery, showing exception that invalid column name

    - by tina
    Hi all, I am using SQL Server 2008. I want to insert records into a table using ExecuteNonQuery, for that I have written: customUtility.ExecuteNonQuery("insert into furniture_ProductAccessories(Product_id, Accessories_id, SkuNo, Description1, Price, Discount) values(" + prodid + "," + strAcc + "," + txtSKUNo.Text + "," + txtAccDesc.Text + "," + txtAccPrices.Text + "," + txtAccDiscount.Text + ")"); & following is ExecuteNonQuery function: public static bool ExecuteNonQuery(string SQL) { bool retVal = false; using (SqlConnection con = new SqlConnection(System.Web.Configuration.WebConfigurationManager.ConnectionStrings["dbConnect"].ToString())) { con.Open(); SqlTransaction trans = con.BeginTransaction(); SqlCommand command = new SqlCommand(SQL, con, trans); try { command.ExecuteNonQuery(); trans.Commit(); retVal = true; } catch(Exception ex) { //HttpContext.Current.Response.Write(SQL + "<br>" + ex.Message); //HttpContext.Current.Response.End(); } finally { // Always call Close when done reading. con.Close(); } return retVal; } } but it showing exception that invalid column name to Description1 and even it's value which coming from txtAccDesc.Text. I have tried by removing Description1 column, other records are getting inserted successfully. Could you please help me? Thanks.

    Read the article

  • How to perform undirected graph processing from SQL data

    - by recipriversexclusion
    I ran into the following problem in dynamically creating topics for our ActiveMQ system: I have a number of processes (M_1, ..., M_n), where n is not large, typically 5-10. Some of the processes will listen to the output of others, through a message queue; these edges are specified in an XML file, e.g. <link from="M1" to="M3"</link> <link from="M2" to="M4"</link> <link from="M3" to="M4"</link> etc. The edges are sparse, so there won't be many of them. I will parse this XML and store this information in an SQL DB, one table for nodes and another for edges. Now, I need to dynamically create strings of the form M1.exe --output_topic=T1 M2.exe --output_topic=T2 M3.exe --input_topic=T1 --output_topic=T3 M4.exe --input_topic=T2 --input_topic=T3 where the tags are sequentially generated. What is the best way to go about querying SQL to obtain these relationships? Are there any tools or other tutorials you can point me to? I've never done graps with SQL. Using SQL is imperative, because we use it for other stuff, too. Thanks!

    Read the article

  • Can't connect to SQL Server 2005 Express from an ASP.NET C# page

    - by Aviv
    Hey guys, I have an MS SQL Server 2005 Express running on a VPS. I'm using pymssql in Python to connect to my server with the following code: conn = pymssql.connect(host='host:port', user='me', password='pwd', database='db') and it works perfectly. When I try to connect to the server from an ASP.NET C# page with the following code: SqlConnection myConnection = new SqlConnection("Data Source=host,port;Network Library=DBMSSOCN; Initial Catalog=db;User ID=me;Password=pwd;"); myConnection.Open(); When I run the ASP.NET page I get the following exception at myConnection.Open();: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) I tried restarting the SQL Server but I had no luck. Can anyone point me out to what I'm missing here? Thanks!

    Read the article

  • Need a SQL statement focus on combination of tables but entries always with uinque ID

    - by Registered User KC
    Hi All, I need SQL code to solve the tables combination problem, described on below: Table old data: name version status lastupdate ID A 0.1 on 6/8/2010 1 B 0.1 on 6/8/2010 2 C 0.1 on 6/8/2010 3 D 0.1 on 6/8/2010 4 E 0.1 on 6/8/2010 5 F 0.1 on 6/8/2010 6 G 0.1 on 6/8/2010 7 Table new data: name version status lastupdate ID A 0.1 on 6/18/2010 #B entry deleted C 0.3 on 6/18/2010 #version_updated C1 0.1 on 6/18/2010 D 0.1 on 6/18/2010 E 0.1 off 6/18/2010 #status_updated F 0.1 on 6/18/2010 G 0.1 on 6/18/2010 H 0.1 on 6/18/2010 #new_added H1 0.1 on 6/18/2010 #new_added the difference of new data and old date: B entry deleted C entry version updated E entry status updated C1/H/H1 entry new added What I want is always keeping the ID - name mapping relationship in old data table no matter how data changed later, a.k.a the name always has a unique ID number bind with it. If entry has update, then update the data, if entry is new added, insert to the table then give a new assigned unique ID. However, I can only use SQL with simple select or update statement then it may too hard for me to write such code, then I hope someone with expertise can give direction, no details needed on the different of SQL variant, a standard sql code as sample is enough. Thanks in advance! Rgs KC

    Read the article

  • SQL Server Database In Single User Mode after Failover

    - by jlichauc
    Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

    Read the article

  • Working with Decimal fields in SSIS

    - by CoffeeAddict
    I'm using SQL Server 2008 w/SP2. I've got an incoming decimal(9,2) field incoming through my OLE DB transformation to my recordset destination transformation. It's like it's reading it as something other than a decimal? I don't know..I'm not an SSIS guru. So continuing on...the problem I have starts here with me trying to stuff the value into a variable for this decimal field. In a foreach loop, I have a variable to represent this decimal field so I can work with it. The first problem that I believe is pretty well known is SSIS variables do not have a decimal type. And from my own testing and what I've read out there, people are using type object for the variable to make SSIS "happy" with decimal values? It makes mine happy. But, then in my foreach loop, I have a for loop. And inside that I'm using an E*xecute SQL Task transformation*. In it, I need to create a parameter mapping to my variable so I can work with that decimal field in my T-SQL call in here. So now I see a type decimal for the parameter and use it and set that to point to my variable. When I run SSIS and it hits my SQL call, I get this in my output window.: The type is not supported.DBTYPE_DECIMAL So I am hitting a wall here. All I wanna do is work with a decimal!!!

    Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >