open with - Page 194 - Developer IT

What packages are neccessary to have sound output from java applets?

- by MvG

I've got a very minimalistic setup of ubuntu precise, created using debootstrap. So please don't assume that any packages are installed just because they usually are. On that system, I'd like to play some sounds from a java applet. However, this always fails with the following error message: javax.sound.midi.MidiUnavailableException: Can not open line at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1132) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1036) ... Caused by: java.lang.IllegalArgumentException: No line matching interface SourceDataLine supporting format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian is supported. at javax.sound.sampled.AudioSystem.getLine(AudioSystem.java:476) at javax.sound.sampled.AudioSystem.getSourceDataLine(AudioSystem.java:604) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1066) ... 35 more As the messages mention a soft synthesizer, and pcm lines, I expect that the lack of some midi daemon is not the issue here. As far as I can tell, the alsa kernel modules are loaded, including snd_hda_intel, snd_pcm, snd_seq_midi among others. I've also included the alsa-base and alsa-utils packages in my installation. alsa-mixer looks good, using “HDA Intel PCH” as its default device. What other packages, configuration settings or daemon startups does java require to make its sound output work?

Read the article

How to Install Windows Media Player 11 on Wine

- by namkid

I am battling to install Windows Media Player 11 on Wine. I have tried the following: Open a Terminal (Applications, Accessories, Terminal) and type "sudo apt-get install wine." This installs Wine Windows Emulator, a free application that allows you to run many Windows programs within Linux. Download Windows Media Player 11 for Windows XP (link in Resources) and save it to Ubuntu's desktop. Once downloaded, right-click and select "Open with Wine Windows Emulator." Follow the on-screen prompts for installing it to your system. Go to "Applications" then "Wine," select "Programs" and open "Windows Media Player." Click "File" then "Open" and locate a DRM file you want to play. Select "OK" to load it into Media Player. I installed Wine (Which is step 1). But I am having problems with step 2 (Download Windows Media Player 11 for Windows XP (link in Resources) and save it to Ubuntu's desktop). I'm just not finding a way to do it. I may be overlooking the (link in Resources) Can't find it. I am stuck!

Read the article

Suggestions required to build an ECommerce Platform

- by Haris

For a prospective client we have to offer a solution to provide following system: CMS Order Management Shopping Cart CRM Helpdesk Accounting & Finance Custom Functions In order to save time and to avoid reinvent the wheel our idea is to integrate different off-the-shelf solutions. Their first requirement is that the system has to be hosted in their country which I think will exclude application like Aplicor, Netsuite & Salesforce. Basically the nucleaus would be the CMS which would integrate all the other apps. PHP or .Net based solutions would be our preferences as have inhouse expertise. So far following are few combinations I have come up with: Joomla (CMS) + Virtuemart (Cart+Ordering) + Sugar CRM + Open ERP (finance) + OTRS Magento (CMS+Cart+Ordering) + Sugar CRM + Open ERP (finance) + Helpdesk Ultimate Drupal (CMS) + Ubercart (Cart+Ordering) + Sugar CRM + Open ERP (finance) + Support Ticketing System Sharepoint (CMS) + OptimusBt (Cart+Ordering) + Dynamics CRM + Great Plains + SharepointHQ Dotnetnuke (CMS) + DNNSpot (Cart+Ordering) + Sigma Pro (CRM+Helpdesk) + Open ERP For Helpdesk I liked Zendesk but the server location was the stopping factor, similar for finance and CRM I liked Aplicor. I would not like to go into detailed requirements as it would make things very complex. Could you please suggest me which options are worth enough to start looking into? What other options we have?

Read the article

Massive Xubuntu desktop malfunction

- by viktiglemma

I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

Read the article

Creating Ubuntu Browser App Frames

- by user73006

After watching the video i am inspired to create one browser but stuck at one place, could you please help me with this. Requirement = - Like you displayed in your Video i wan create Multiple Buttons in my Toolbar which will open Second ToolBar or Popup Window. - From that Pop Window i wanted to Select Specific Button Which will open My Required Browser. Question - - As displayed in your Video i create new BUtton and If i try to open new link using that it works but now i want to display tool bar or Popup window once any one click on that button, how can i do that.The Second Tool Bar Need to be Activated only after clicking on that button. Things i Tried - - As per my understanding i create Second Toolbar and on that tool bar i have created Button, now i wan know how do i link that tool bar with my Browser Toolbar button. - I tried that by passing Signal Property in Second Toolbar in Quickly but something is missing. MY Code class TvbrowserWindow(Window): gtype_name = "TvbrowserWindow" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the main window""" super(TvbrowserWindow, self).finish_initializing(builder) self.AboutDialog = AboutTvbrowserDialog self.PreferencesDialog = PreferencesTvbrowserDialog # Code for other initialization actions should be added here. self.refreshbutton=self.builder.get_object("refreshbutton") self.SONY=self.builder.get_object("SONY") self.urlentry=self.builder.get_object("urlentry") self.scrolledwindow1=self.builder.get_object("scrolledwindow1") self.webview = WebKit.WebView() self.scrolledwindow1.add(self.webview) self.webview.show() def on_refreshbutton_clicked(self, widget): print "refresh" def on_urlentry_activate(self, widget): url = widget.get_text() print url self.webview.open(url)

Read the article

I want to be able to use the unity menu with Citrix full screen

- by porec

I use Citrix Reciever at work, with both XenApp and XenDesktop. Many times at the same time. Since the unity Menu stil apeirs on the top anyway, I'd like to be able to use it. Now I can see it, but it doesn't work.. I have to either tab me out, (double clicking the ALT first)opening another program first, or move the mouse to the left, opening another program from the unity menu from the left, BEFORE I can use the menu on the top.. (my menu on the left side is in autohide mode, so I actually like it :)) For example. I use spotify for lisening to music, it apeirs on the top menu, but it doesn't react when it click it.. I have to move the mouse to the left, open another program, then move to the top an ask it to show spofity. If I open spofify from the left menu, it hangs.. (since its hidden, and I have to ask it to be open, not reopen the hole program..) Or If I want to lock the screen, I have to open another program, (i.ex. nixnote) before I can lock it) since the unity menu is "on the top" anyways, I don't see the problem that it should be able to control such things..

Read the article

Blatant copyright theft

- by Tom Gullen

Found a user on the forum trying to solicit business for his website, a good user reported it and I checked the website out. Firstly and most dangerously it's attempting to sell our original software, which is open source. Our open source software is around 15mb big and he's serving a 50mb download and trying to sell it for $20. He's also stolen our CSS/images/site design in general which is all custom built. I attempted to open reasonable discussion with him, and he responded promptly saying he would remove offending materials if he could just have 3 days to sort it out which I accepted. I'm not sure what his plan was because everything on that site is offending material. Anyway he messaged back saying the site was offline, and it was, but it went back online shortly afterwards. It's pretty sickening that someone is selling open source work as their own, (the site about us page references him as the sole developer etc etc, it's unbelievable to read it). I want to shut it down, what are my options? I'm going to contact his domain registrar, web host, and Paypal (that's how he's selling the program). Any other ideas?

Read the article

Oracle MDM Panel at OOW 12: Best practices, Lessons Learned and More...

- by Mala Narasimharajan

By Narayana Machiraju We are less than two weeks out from the start of Oracle Open World 2012. The MDM team has built-up a solid line-up of product and customer sessions for you to attend this year in addition to the hands-on labs, and numerous demonstration pods in Moscone West. This year we will be hosting a customer panel session dedicated to Oracle Customer Hub at Oracle Open World. An esteemed panel of Oracle Customer Hub customers in different Industries: Credit Suisse, Allianz and Elsevier will provide insight into the journey of Customer MDM right from building a business case and MDM vision, establishing and sustaining governance, implementation strategies and realizing the benefits. You will also hear about implementation challenges, phasing strategies and lessons learned from real-life experiences. If you are already implementing Customer MDM or evaluating the benefits of MDM and you would like to hear directly from our customers then I highly recommend you attend this session: Customer MDM Panel: Discussion and Q&A on Implementation Best Practices, Data Quality, Data Governance and ROI Wednesday October, 3rd, 5:00PM - 6:00PM Westin Market Street Hotel - Metropolitan 1 The MDM track at Oracle Open World covers variety of topics related to MDM. In addition to the product management team presenting product updates and roadmap, we have several customer panels, Conference sessions and Customer round table sessions featuring a lot of marquee Customers. You can see an overview of MDM sessions here. We hope to see you at Open World and stay in touch via our future blogs.

Read the article

What sorts of tools make a Django Developer valuable? [closed]

- by MrOodles

I am a Django Consultant and I want to increase the value that I provide to clients. My first question was an epic failure according to the FAQ. So I'll try again before I delete it. What types of tools should a Django developer have in his tool belt to increase the value to the client? Would a collection of project templates be useful? Are there open-source project templates available that can be forked and altered? Is there a proper way to configure templates to include dependencies for certain types of projects? What about deployment scripts using tools like Puppet or Chef? Does it make a lot of sense to fork Django apps on GitHub and make contributions to open source projects there? Would clients percieve extra value in programmers that are contributing to open source projects? Are there industry best practices for implementing continuous integration in a Django project? I want the answer to be open ended, as I'm at the beginning of my research. I am curious to know what sorts of tools other Django consultants use on a daily and per-project basis, and how they use them.

Read the article

Making document storage in Sharepoint a breeze (leave the Web UI behind)

- by deadlydog

Hey everyone, I know many of us regularly use Sharepoint for document storage in order to make documents available to several people, have it version controlled, etc. Doing this through the Web UI can be a real headache, especially when you have multiple documents you want to modify or upload, or when IE isn’t your default browser. Luckily we can access the Sharepoint library like a regular network drive if we like. Open Sharepoint in Internet Explorer (other browsers don’t support the Open with Explorer functionality), navigate to wherever your documents are stored, choose the Library tab, and then click Open with Explorer. This will open the document storage in Explorer and you can interact with the documents just like they were on any other network drive J This makes uploading large numbers of documents or directory structures super easy (a simple copy-paste), and modifying your files nice and easy. As an added bonus, you can drag and drop that location from the address bar in Explorer to the Favorites menu so that it’s always easily accessible and you can leave the Sharepoint Web UI behind completely for modifying your documents. Just click on the new favorite to go straight to your documents. You can even map this folder location as a network drive if you want to have it show up as another drive (e.g N: drive). I hope you found this as useful as I did

Read the article

What do I do for dependencies installing wine1.7 on 14.04

- by user285207

user@chrubuntu:~$ sudo apt-get install wine1.7 [sudo] password for user: user Sorry, try again. [sudo] password for user: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.7 : Depends: wine1.7-i386 (= 1:1.7.19-0ubuntu2~trusty2) but it is not installable Recommends: gnome-exe-thumbnailer but it is not going to be installed or kde-runtime but it is not going to be installed Recommends: ttf-mscorefonts-installer but it is not going to be installed Recommends: fonts-horai-umefont but it is not going to be installed Recommends: fonts-unfonts-core but it is not going to be installed Recommends: ttf-wqy-microhei Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. user@chrubuntu:~$ Trying to install wine1.7 on Ubuntu 14.04 64 bit, and i'm not sure what this means, help is greatly appreciated. I already ran sudo apt-get update and get this: Reading package lists... Done W: Duplicate sources.list entry http://dl.google.com/linux/chrome/deb/ stable/main amd64 Packages (/var/lib/apt/lists/dl.google.com_linux_chrome_deb_dists_stable_main_binary-amd64_Packages) W: You may want to run apt-get update to correct these problems So I run apt-get update and: E: Could not open lock file /var/lib/apt/lists/lock - open (13: Permission denied) E: Unable to lock directory /var/lib/apt/lists/ E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root? This is all very stressing because I have been trying to get Wine for the past week and had to reinstall and IT STILL WON'T WORK.

Read the article

DLL Config in Mono

- by nubela

Hi, I'm trying to pick up Svn.NET (http://www.pumacode.org/projects/svndotnet/) library for use in my Mono project. I tried compiling its mockapp - svnmockapp project (http://www.pumacode.org/projects/svndotnet/browser/trunk/SvnMockApp) , I am able to get the references right and get it compiled right. I understand that it references 2 other modules libapr (libapr-1.so.0) and svn_client (libsvn_client-1.so.0) , by which I've created PumaCode.SvnDotNet.dll.config in /bin/Debug . That is all I've done to tried to try to get the mockapp at least outputting something to show that it is indeed interfacing SVN. Nevertheless, it is not working. Commands that are entered that doesn't interface SVN works fine: $ mono SvnTest.exe -usage Usage: SvnTest <subcommand> [options] Short Options: ~?.V Subcommands: add, checkout[co], status[st], update[up] For help on subcommands, use the -?/--help subcommand option. Commands that tries to access SVN throws an exception: $ mono SvnTest.exe st An exception was thrown by the type initializer for PumaCode.SvnDotNet.AprSharp.Apr Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object at PumaCode.SvnDotNet.SubversionSharp.SvnMockApp.CmdBase.Run (PumaCode.SvnDotNet.SubversionSharp.SvnMockApp.SubCommand sc, System.String[] args) [0x00000] at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (object,object[],System.Exception&) at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] --- End of inner exception stack trace --- at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] at PumaCode.SvnDotNet.SubversionSharp.SvnMockApp.Application.Run (System.String[] args) [0x00000] at PumaCode.SvnDotNet.SubversionSharp.SvnMockApp.Application.Main (System.String[] args) [0x00000] Using MONO_DEBUG_LEVEL="debug", we get the following log pasted here. At the tail end of the log, we see this: . . . Mono-INFO: DllImport attempting to load: 'libapr-1'. Mono-INFO: DllImport loading location: 'libapr-1.so'. Mono-INFO: DllImport error loading library: 'libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading library: './libapr-1.so'. Mono-INFO: DllImport error loading library './libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading: 'libapr-1'. Mono-INFO: DllImport error loading library 'libapr-1: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport attempting to load: 'libapr-1'. Mono-INFO: DllImport loading location: 'libapr-1.so'. Mono-INFO: DllImport error loading library: 'libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading library: './libapr-1.so'. Mono-INFO: DllImport error loading library './libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading: 'libapr-1'. Mono-INFO: DllImport error loading library 'libapr-1: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport attempting to load: 'libapr-1'. Mono-INFO: DllImport loading location: 'libapr-1.so'. Mono-INFO: DllImport error loading library: 'libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading library: './libapr-1.so'. Mono-INFO: DllImport error loading library './libapr-1.so: cannot open shared object file: No such file or directory'. Mono-INFO: DllImport loading: 'libapr-1'. Mono-INFO: DllImport error loading library 'libapr-1: cannot open shared object file: No such file or directory'. An exception was thrown by the type initializer for PumaCode.SvnDotNet.AprSharp.Apr I've tried to symlink the appropriate modules in the directory where SvnTest.exe exists, but this still persist. How can I fix this? Did I place the PumaCode.SvnDotNet.dll.config in the wrong folder? (I placed it at /bin/Debug and also tried /bin) What can I do to remedy this? Thank you for your kind help! Much appreciated! Heres the config file: (PumaCode.SvnDotNet.dll.config) <configuration> <dllmap dll="libapr" target="/usr/lib/libapr-1.so.0"/> <dllmap dll="svn_client-1" target="/usr/lib/libsvn_client-1.so.0"/> </configuration>

Read the article

Re-opening closed dialog puts it in the start position after moving it

- by semmelbroesel

I'm using multiple instances of the JQuery-UI dialog along with draggable and resizable. Whenever I drag or resize one of the dialog boxes, the position and dimensions of the current box are saved to a database and then loaded the next time the page opens. This is working well. However, when I close a dialog box and re-open it using a button, jQuery sets the position of the box back to its original location in the center of the screen. Furthermore, I use a show effect to slide the box off to the left on closing and in from the left on re-opening. I found two ways to update its position when the slide in animation is done, however, it still slides into the center of the screen, and I have yet to find a way to get it to slide in towards the location it is supposed to have. Here are the parts of the code that play a part in this: $('.box').dialog({ closeOnEscape: false, hide: { effect: "drop", direction: 'left' }, beforeClose: function (evt, ui){ var $this = $(this); SavePos($this); // saves the dimensions to db }, dragStop: function() { var $this = $(this); SavePos($this); }, resizeStop: function() { var $this = $(this); SavePos($this); }, open: function() { var $this = $(this); $this.dialog('option', { show: { effect: "drop", direction: 'left'} } ); if (init) // meaning only load this code when the page has finished initializing { // tried it both ways - set the position before and after the effect - no success UpdatePos($this.attr('id')); // I tried this section with promise() and effect / complete - I found no difference $this.parent().promise().done(function() { UpdatePos($this.attr('id')); }); } } }); function UpdatePos(key) { // boxpos is an object holding the position for each box by the box's id var $this = $('#' + key); //console.log('updating pos for box ' + boxid); if ($this && $this.hasClass('ui-dialog-content')) { //console.log($this.dialog('widget').css('left')); $this.dialog('option', { width: boxpos[key].width, height: boxpos[key].height }); $this.dialog('widget').css({ left: boxpos[key].left + 'px', top: boxpos[key].top + 'px' }); //console.log('finished updating pos'); //console.log($this.dialog('widget').css('left')); } } The button that re-opens the box has this code on it to make that happen: var $box = $('#boxid'); if ($box) { if ($box.dialog('isOpen')) { $box.dialog('moveToTop'); } else { $box.dialog("open") } } I don't know what jQuery-UI does to the box as it hides it (other than display:none) or to make it slide in, so maybe there's something I'm missing here that might help... Basically, I need JQuery to remember the box' position and put the box back into that location when it is re-opened. It took me days to make it this far, but this is one obstacle I have yet to overcome. Maybe there's a different way I can re-open the box? Thanks! EDIT: Forgot - this issue ONLY happens when I use my UpdatePos function to set the location of a box (i.e. on page load). When I drag a box with my mouse, close it, and re-open it, everything works. So I'm guessing there's one more storage location for the box' position that I'm missing here... EDIT2: After more messing with it, my code for debugging now looks like this: open: function() { var $this = $(this); console.log('box open'); console.log($this.dialog('widget').position()); // { top=0, left=-78.5} console.log($this.dialog('widget').css('left')); $this.dialog('option', { show: { effect: "drop", direction: 'left'} } ); if (init) { UpdatePos($this.attr('id')); $this.parent().promise().done(function() { console.log($this.dialog('widget').position()); // { top=313, left=641.5} console.log($this.dialog('widget').css('left')); UpdatePos($this.attr('id')); console.log($this.dialog('widget').position()); // { top=121, left=107} console.log($this.dialog('widget').css('left')); }); } The results I'm getting are: box open Object { top=0, left=-78.5} -78.5px Object { top=313, left=641.5} 641.5px Object { top=121, left=107} 107px So looks to me as if the widget is being moved off screen (left=-78.5) and then moved for the animation, and then my code moves it into the location that it should be in (121/107). The position() results for $box.position() or $box.dialog().position() do not change during this debugging section. Maybe this will help someone here - I'm still out of ideas here... ... and I just discovered that when I drag the item around myself, then close and re-open it, it is very unpredictable. Sometimes, it will end up in the correct location horizontally, but not vertically. Sometimes, it will end up back in the center of the screen...

Read the article

Change or Reset Windows Password from a Ubuntu Live CD

- by Trevor Bekolay

If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

Read the article

Ardour wont start Jack problem

- by Drew S

I downloaded Ardour yesterday, it worked, edited an audio file done. Come back today it wont start I get this: Ardour could not start JACK There are several possible reasons: 1) You requested audio parameters that are not supported.. 2) JACK is running as another user. Please consider the possibilities, and perhaps try different parameters. So I try and look at qjackctl to see what happening there. When I try to start JACK I get D-BUS: JACK server could not be started. then Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. and this is the message box in JACK. 15:22:12.927 Patchbay deactivated. 15:22:12.927 Statistics reset. 15:22:12.944 ALSA connection change. 15:22:12.951 D-BUS: Service is available (org.jackaudio.service aka jackdbus). Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:22:12.959 ALSA connection graph change. 15:22:45.850 ALSA connection graph change. 15:22:46.021 ALSA connection change. 15:22:56.492 ALSA connection graph change. 15:22:56.624 ALSA connection change. 15:23:42.340 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:23:42 2013: Starting jack server... Wed Oct 23 15:23:42 2013: JACK server starting in realtime mode with priority 10 Wed Oct 23 15:23:42 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:23:42 2013: Acquired audio card Audio0 Wed Oct 23 15:23:42 2013: creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit Wed Oct 23 15:23:42 2013: ERROR: ATTENTION: The playback device "hw:0" is already in use. The following applications are using your soundcard(s) so you should check them and stop them as necessary before trying to start JACK again: pulseaudio (process ID 2553) Wed Oct 23 15:23:42 2013: ERROR: Cannot initialize driver Wed Oct 23 15:23:42 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:23:42 2013: ERROR: Failed to open server Wed Oct 23 15:23:43 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:41.669 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:49.006 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:48 2013: Starting jack server... Wed Oct 23 15:26:48 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:48 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:48 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:48 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:48 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:48 2013: ERROR: Failed to open server Wed Oct 23 15:26:50 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:52.441 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:55.997 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:55 2013: Starting jack server... Wed Oct 23 15:26:55 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:55 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:55 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:55 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:55 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:55 2013: ERROR: Failed to open server Wed Oct 23 15:26:57 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:59.054 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:29:24.624 ALSA connection graph change. 15:29:24.641 ALSA connection change. 15:33:11.760 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:33:11 2013: Starting jack server... Wed Oct 23 15:33:11 2013: JACK server starting in non-realtime mode Wed Oct 23 15:33:11 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:33:11 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:33:11 2013: ERROR: Cannot initialize driver Wed Oct 23 15:33:11 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:33:11 2013: ERROR: Failed to open server Wed Oct 23 15:33:12 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:34:09.439 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started

Read the article

How to use ULS in SharePoint 2010 for Custom Code Exception Logging?

- by venkatx5

What is ULS in SharePoint 2010? ULS stands for Unified Logging Service which captures and writes Exceptions/Logs in Log File(A Plain Text File with .log extension). SharePoint logs Each and every exceptions with ULS. SharePoint Administrators should know ULS and it's very useful when anything goes wrong. but when you ask any SharePoint 2007 Administrator to check log file then most of them will Kill you. Because read and understand the log file is not so easy. Imagine open a plain text file of 20 MB in NotePad and go thru line by line. Now Microsoft developed a tool "ULS Viewer" to view those Log files in easily readable format. This tools also helps to filter events based on exception priority. You can read on this blog to know in details about ULS Viewer . Where to get ULS Viewer? ULS Viewer is developed by Microsoft and available to download for free. URL : http://code.msdn.microsoft.com/ULSViewer/Release/ProjectReleases.aspx?ReleaseId=3308 Note: Eventhought this tool developed by Microsoft, it's not supported by Microsoft. Means you can't support for this tool from Microsoft and use it on your own Risk. By the way what's the risk in viewing Log Files?! How to use ULS in SharePoint 2010 Custom Code? ULS can be extended to use in user solutions to log exceptions. In Detail, Developer can use ULS to log his own application errors and exceptions on SharePoint Log files. So now all in Single Place (That's why it's called "Unified Logging"). Well in this article I am going to use Waldek's Code (Reference Link). However the article is core and am writing container for that (Basically how to implement the code in Detail). Let's see the steps. Open Visual Studio 2010 -> File -> New Project -> Visual C# -> Windows -> Class Library -> Name : ULSLogger (Make sure you've selected .net Framework 3.5) In Solution Explorer Panel, Rename the Class1.cs to LoggingService.cs Right Click on References -> Add Reference -> Under .Net tab select "Microsoft.SharePoint" Right Click on the Project -> Properties. Select "Signing" Tab -> Check "Sign the Assembly". In the below drop down select <New> and enter "ULSLogger", uncheck the "Protect my key with a Password" option. Now copy the below code and paste. (Or Just refer.. :-) ) using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint; using Microsoft.SharePoint.Administration; using System.Runtime.InteropServices; namespace ULSLogger { public class LoggingService : SPDiagnosticsServiceBase { public static string vsDiagnosticAreaName = "Venkats SharePoint Logging Service"; public static string CategoryName = "vsProject"; public static uint uintEventID = 700; // Event ID private static LoggingService _Current; public static LoggingService Current { get { if (_Current == null) { _Current = new LoggingService(); } return _Current; } }private LoggingService() : base("Venkats SharePoint Logging Service", SPFarm.Local) {}protected override IEnumerable<SPDiagnosticsArea> ProvideAreas() { List<SPDiagnosticsArea> areas = new List<SPDiagnosticsArea> { new SPDiagnosticsArea(vsDiagnosticAreaName, new List<SPDiagnosticsCategory> { new SPDiagnosticsCategory(CategoryName, TraceSeverity.Medium, EventSeverity.Error) }) }; return areas; }public static string LogErrorInULS(string errorMessage) { string strExecutionResult = "Message Not Logged in ULS. "; try { SPDiagnosticsCategory category = LoggingService.Current.Areas[vsDiagnosticAreaName].Categories[CategoryName]; LoggingService.Current.WriteTrace(uintEventID, category, TraceSeverity.Unexpected, errorMessage); strExecutionResult = "Message Logged"; } catch (Exception ex) { strExecutionResult += ex.Message; } return strExecutionResult; }public static string LogErrorInULS(string errorMessage, TraceSeverity tsSeverity) { string strExecutionResult = "Message Not Logged in ULS. "; try { SPDiagnosticsCategory category = LoggingService.Current.Areas[vsDiagnosticAreaName].Categories[CategoryName]; LoggingService.Current.WriteTrace(uintEventID, category, tsSeverity, errorMessage); strExecutionResult = "Message Logged"; } catch (Exception ex) { strExecutionResult += ex.Message; } return strExecutionResult; } } } Just build the solution and it's ready to use now. This ULS solution can be used in SharePoint Webparts or Console Application. Lets see how to use it in a Console Application. SharePoint Server 2010 must be installed in the same Server or the application must be hosted in SharPoint Server 2010 environment. The console application must be set to "x64" Platform target. Create a New Console Application. (Visual Studio -> File -> New Project -> C# -> Windows -> Console Application) Right Click on References -> Add Reference -> Under .Net tab select "Microsoft.SharePoint" Open Program.cs add "using Microsoft.SharePoint.Administration;" Right Click on References -> Add Reference -> Under "Browse" tab select the "ULSLogger.dll" which we created first. (Path : ULSLogger\ULSLogger\bin\Debug\) Right Click on Project -> Properties -> Select "Build" Tab -> Under "Platform Target" option select "x64". Open the Program.cs and paste the below code. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint.Administration; using ULSLogger; namespace ULSLoggerClient { class Program { static void Main(string[] args) { Console.WriteLine("ULS Logging Started."); string strResult = LoggingService.LogErrorInULS("My Application is Working Fine."); Console.WriteLine("ULS Logging Info. Result : " + strResult); string strResult = LoggingService.LogErrorInULS("My Application got an Exception.", TraceSeverity.High); Console.WriteLine("ULS Logging Waring Result : " + strResult); Console.WriteLine("ULS Logging Completed."); Console.ReadLine(); } } } Just build the solution and execute. It'll log the message on the log file. Make sure you are using Farm Administrator User ID. You can play with Message and TraceSeverity as required. Now Open ULS Viewer -> File -> Open From -> ULS -> Select First Option to open the default ULS Log. It's Uls RealTime and will show all log entries in readable table format. Right Click on a row and select "Filter By This Item". Select "Event ID" and enter value "700" that we used in the application. Click Ok and now you'll see the Exceptions/Logs which logged by our application. If you want to see High Priority Messages only then Click Icons except Red Cross Icon on the Toolbar. The tooltip will tell what's the icons used for.

Read the article

how to use serial port in UDK using windows DLL and DLLBind directive?

- by Shayan Abbas

I want to use serial port in UDK, For that purpose i use a windows DLL and DLLBind directive. I have a thread in windows DLL for serial port data recieve event. My problem is: this thread doesn't work properly. Please Help me. below is my code SerialPortDLL Code: // SerialPortDLL.cpp : Defines the exported functions for the DLL application. // #include "stdafx.h" #include "Cport.h" extern "C" { // This is an example of an exported variable //SERIALPORTDLL_API int nSerialPortDLL=0; // This is an example of an exported function. //SERIALPORTDLL_API int fnSerialPortDLL(void) //{ // return 42; //} CPort *sp; __declspec(dllexport) void Open(wchar_t* portName) { sp = new CPort(portName); //MessageBox(0,L"ha ha!!!",L"ha ha",0); //MessageBox(0,portName,L"ha ha",0); } __declspec(dllexport) void Close() { sp->Close(); MessageBox(0,L"ha ha!!!",L"ha ha",0); } __declspec(dllexport) wchar_t *GetData() { return sp->GetData(); } __declspec(dllexport) unsigned int GetDSR() { return sp->getDSR(); } __declspec(dllexport) unsigned int GetCTS() { return sp->getCTS(); } __declspec(dllexport) unsigned int GetRing() { return sp->getRing(); } } CPort class code: #include "stdafx.h" #include "CPort.h" #include "Serial.h" CSerial serial; HANDLE HandleOfThread; LONG lLastError = ERROR_SUCCESS; bool fContinue = true; HANDLE hevtOverlapped; HANDLE hevtStop; OVERLAPPED ov = {0}; //char szBuffer[101] = ""; wchar_t *szBuffer = L""; wchar_t *data = L""; DWORD WINAPI ThreadHandler( LPVOID lpParam ) { // Keep reading data, until an EOF (CTRL-Z) has been received do { MessageBox(0,L"ga ga!!!",L"ga ga",0); //Sleep(10); // Wait for an event lLastError = serial.WaitEvent(&ov); if (lLastError != ERROR_SUCCESS) { //LOG( " Unable to wait for a COM-port event" ); } // Setup array of handles in which we are interested HANDLE ahWait[2]; ahWait[0] = hevtOverlapped; ahWait[1] = hevtStop; // Wait until something happens switch (::WaitForMultipleObjects(sizeof(ahWait)/sizeof(*ahWait),ahWait,FALSE,INFINITE)) { case WAIT_OBJECT_0: { // Save event const CSerial::EEvent eEvent = serial.GetEventType(); // Handle break event if (eEvent & CSerial::EEventBreak) { //LOG( " ### BREAK received ###" ); } // Handle CTS event if (eEvent & CSerial::EEventCTS) { //LOG( " ### Clear to send %s ###", serial.GetCTS() ? "on":"off" ); } // Handle DSR event if (eEvent & CSerial::EEventDSR) { //LOG( " ### Data set ready %s ###", serial.GetDSR() ? "on":"off" ); } // Handle error event if (eEvent & CSerial::EEventError) { switch (serial.GetError()) { case CSerial::EErrorBreak: /*LOG( " Break condition" );*/ break; case CSerial::EErrorFrame: /*LOG( " Framing error" );*/ break; case CSerial::EErrorIOE: /*LOG( " IO device error" );*/ break; case CSerial::EErrorMode: /*LOG( " Unsupported mode" );*/ break; case CSerial::EErrorOverrun: /*LOG( " Buffer overrun" );*/ break; case CSerial::EErrorRxOver: /*LOG( " Input buffer overflow" );*/ break; case CSerial::EErrorParity: /*LOG( " Input parity error" );*/ break; case CSerial::EErrorTxFull: /*LOG( " Output buffer full" );*/ break; default: /*LOG( " Unknown" );*/ break; } } // Handle ring event if (eEvent & CSerial::EEventRing) { //LOG( " ### RING ###" ); } // Handle RLSD/CD event if (eEvent & CSerial::EEventRLSD) { //LOG( " ### RLSD/CD %s ###", serial.GetRLSD() ? "on" : "off" ); } // Handle data receive event if (eEvent & CSerial::EEventRecv) { // Read data, until there is nothing left DWORD dwBytesRead = 0; do { // Read data from the COM-port lLastError = serial.Read(szBuffer,33,&dwBytesRead); if (lLastError != ERROR_SUCCESS) { //LOG( "Unable to read from COM-port" ); } if( dwBytesRead == 33 && szBuffer[0]=='$' ) { // Finalize the data, so it is a valid string szBuffer[dwBytesRead] = '\0'; ////LOG( "\n%s\n", szBuffer ); data = szBuffer; } } while (dwBytesRead > 0); } } break; case WAIT_OBJECT_0+1: { // Set the continue bit to false, so we'll exit fContinue = false; } break; default: { // Something went wrong //LOG( "Error while calling WaitForMultipleObjects" ); } break; } } while (fContinue); MessageBox(0,L"kka kk!!!",L"kka ga",0); return 0; } CPort::CPort(wchar_t *portName) { // Attempt to open the serial port (COM2) //lLastError = serial.Open(_T(portName),0,0,true); lLastError = serial.Open(portName,0,0,true); if (lLastError != ERROR_SUCCESS) { //LOG( "Unable to open COM-port" ); } // Setup the serial port (115200,8N1, which is the default setting) lLastError = serial.Setup(CSerial::EBaud115200,CSerial::EData8,CSerial::EParNone,CSerial::EStop1); if (lLastError != ERROR_SUCCESS) { //LOG( "Unable to set COM-port setting" ); } // Register only for the receive event lLastError = serial.SetMask(CSerial::EEventBreak | CSerial::EEventCTS | CSerial::EEventDSR | CSerial::EEventError | CSerial::EEventRing | CSerial::EEventRLSD | CSerial::EEventRecv); if (lLastError != ERROR_SUCCESS) { //LOG( "Unable to set COM-port event mask" ); } // Use 'non-blocking' reads, because we don't know how many bytes // will be received. This is normally the most convenient mode // (and also the default mode for reading data). lLastError = serial.SetupReadTimeouts(CSerial::EReadTimeoutNonblocking); if (lLastError != ERROR_SUCCESS) { //LOG( "Unable to set COM-port read timeout" ); } // Create a handle for the overlapped operations hevtOverlapped = ::CreateEvent(0,TRUE,FALSE,0);; if (hevtOverlapped == 0) { //LOG( "Unable to create manual-reset event for overlapped I/O" ); } // Setup the overlapped structure ov.hEvent = hevtOverlapped; // Open the "STOP" handle hevtStop = ::CreateEvent(0,TRUE,FALSE,_T("Overlapped_Stop_Event")); if (hevtStop == 0) { //LOG( "Unable to create manual-reset event for stop event" ); } HandleOfThread = CreateThread( NULL, 0, ThreadHandler, 0, 0, NULL); } CPort::~CPort() { //fContinue = false; //CloseHandle( HandleOfThread ); //serial.Close(); } void CPort::Close() { fContinue = false; CloseHandle( HandleOfThread ); serial.Close(); } wchar_t *CPort::GetData() { return data; } bool CPort::getCTS() { return serial.GetCTS(); } bool CPort::getDSR() { return serial.GetDSR(); } bool CPort::getRing() { return serial.GetRing(); } Unreal Script Code: class MyPlayerController extends GamePlayerController DLLBind(SerialPortDLL); dllimport final function Open(string portName); dllimport final function Close(); dllimport final function string GetData();

Read the article

Converting "A* Search" code from C++ to Java [on hold]

- by mr5

Updated! I get this code from this site It's A* Search Algorithm(finding shortest path with heuristics) I modify most of variable names and some if conditions from the original version to satisfy my syntactic taste. It works in C++ (as I can't see any trouble with it) but fails in Java version. Java Code: String findPath(int startX, int startY, int finishX, int finishY) { @SuppressWarnings("unchecked") LinkedList<Node>[] nodeList = (LinkedList<Node>[]) new LinkedList<?>[2]; nodeList[0] = new LinkedList<Node>(); nodeList[1] = new LinkedList<Node>(); Node n0; Node m0; int nlIndex = 0; // queueList index // reset the node maps for(int y = 0;y < ROW_COUNT; ++y) { for(int x = 0;x < COL_COUNT; ++x) { close_nodes_map[y][x] = 0; open_nodes_map[y][x] = 0; } } // create the start node and push into list of open nodes n0 = new Node( startX, startY, 0, 0 ); n0.updatePriority( finishX, finishY ); nodeList[nlIndex].push( n0 ); open_nodes_map[startY][startX] = n0.getPriority(); // mark it on the open nodes map // A* search while( !nodeList[nlIndex].isEmpty() ) { LinkedList<Node> pq = nodeList[nlIndex]; // get the current node w/ the highest priority // from the list of open nodes n0 = new Node( pq.peek().getX(), pq.peek().getY(), pq.peek().getIterCount(), pq.peek().getPriority()); int x = n0.getX(); int y = n0.getY(); nodeList[nlIndex].pop(); // remove the node from the open list open_nodes_map[y][x] = 0; // mark it on the closed nodes map close_nodes_map[y][x] = 1; // quit searching when the goal state is reached //if((*n0).estimate(finishX, finishY) == 0) if( x == finishX && y == finishY ) { // generate the path from finish to start // by following the directions String path = ""; while( !( x == startX && y == startY) ) { int j = dir_map[y][x]; int c = '0' + ( j + Node.DIRECTION_COUNT / 2 ) % Node.DIRECTION_COUNT; path = (char)c + path; x += DIR_X[j]; y += DIR_Y[j]; } return path; } // generate moves (child nodes) in all possible directions for(int i = 0; i < Node.DIRECTION_COUNT; ++i) { int xdx = x + DIR_X[i]; int ydy = y + DIR_Y[i]; // boundary check if (!(xdx >= 0 && xdx < COL_COUNT && ydy >= 0 && ydy < ROW_COUNT)) continue; if ( ( gridMap.getData( ydy, xdx ) == GridMap.WALKABLE || gridMap.getData( ydy, xdx ) == GridMap.FINISH) && close_nodes_map[ydy][xdx] != 1 ) { // generate a child node m0 = new Node( xdx, ydy, n0.getIterCount(), n0.getPriority() ); m0.nextLevel( i ); m0.updatePriority( finishX, finishY ); // if it is not in the open list then add into that if( open_nodes_map[ydy][xdx] == 0 ) { open_nodes_map[ydy][xdx] = m0.getPriority(); nodeList[nlIndex].push( m0 ); // mark its parent node direction dir_map[ydy][xdx] = ( i + Node.DIRECTION_COUNT / 2 ) % Node.DIRECTION_COUNT; } else if( open_nodes_map[ydy][xdx] > m0.getPriority() ) { // update the priority info open_nodes_map[ydy][xdx] = m0.getPriority(); // update the parent direction info dir_map[ydy][xdx] = ( i + Node.DIRECTION_COUNT / 2 ) % Node.DIRECTION_COUNT; // replace the node // by emptying one queueList to the other one // except the node to be replaced will be ignored // and the new node will be pushed in instead while( !(nodeList[nlIndex].peek().getX() == xdx && nodeList[nlIndex].peek().getY() == ydy ) ) { nodeList[1 - nlIndex].push( nodeList[nlIndex].pop() ); } nodeList[nlIndex].pop(); // remove the wanted node // empty the larger size queueList to the smaller one if( nodeList[nlIndex].size() > nodeList[ 1 - nlIndex ].size() ) nlIndex = 1 - nlIndex; while( !nodeList[nlIndex].isEmpty() ) { nodeList[1 - nlIndex].push( nodeList[nlIndex].pop() ); } nlIndex = 1 - nlIndex; nodeList[nlIndex].push( m0 ); // add the better node instead } } } } return ""; // no route found } Output1: Legends . = PATH ? = START X = FINISH 3,2,1 = OBSTACLES (Misleading path) Output2: Changing these lines: n0 = new Node( a, b, c, d ); m0 = new Node( e, f, g, h ); to n0.set( a, b, c, d ); m0.set( e, f, g, h ); I get (I'm really confused) C++ Code: std::string A_Star::findPath(int startX, int startY, int finishX, int finishY) { typedef std::queue<Node> List_Container; List_Container nodeList[2]; // list of open (not-yet-tried) nodes Node n0; Node m0; int pqIndex = 0; // nodeList index // reset the node maps for(int y = 0;y < ROW_COUNT; ++y) { for(int x = 0;x < COL_COUNT; ++x) { close_nodes_map[y][x] = 0; open_nodes_map[y][x] = 0; } } // create the start node and push into list of open nodes n0 = Node( startX, startY, 0, 0 ); n0.updatePriority( finishX, finishY ); nodeList[pqIndex].push( n0 ); open_nodes_map[startY][startX] = n0.getPriority(); // mark it on the open nodes map // A* search while( !nodeList[pqIndex].empty() ) { List_Container &pq = nodeList[pqIndex]; // get the current node w/ the highest priority // from the list of open nodes n0 = Node( pq.front().getX(), pq.front().getY(), pq.front().getIterCount(), pq.front().getPriority()); int x = n0.getX(); int y = n0.getY(); nodeList[pqIndex].pop(); // remove the node from the open list open_nodes_map[y][x] = 0; // mark it on the closed nodes map close_nodes_map[y][x] = 1; // quit searching when the goal state is reached //if((*n0).estimate(finishX, finishY) == 0) if( x == finishX && y == finishY ) { // generate the path from finish to start // by following the directions std::string path = ""; while( !( x == startX && y == startY) ) { int j = dir_map[y][x]; char c = '0' + ( j + DIRECTION_COUNT / 2 ) % DIRECTION_COUNT; path = c + path; x += DIR_X[j]; y += DIR_Y[j]; } return path; } // generate moves (child nodes) in all possible directions for(int i = 0; i < DIRECTION_COUNT; ++i) { int xdx = x + DIR_X[i]; int ydy = y + DIR_Y[i]; // boundary check if (!( xdx >= 0 && xdx < COL_COUNT && ydy >= 0 && ydy < ROW_COUNT)) continue; if ( ( pGrid->getData(ydy,xdx) == WALKABLE || pGrid->getData(ydy, xdx) == FINISH) && close_nodes_map[ydy][xdx] != 1 ) { // generate a child node m0 = Node( xdx, ydy, n0.getIterCount(), n0.getPriority() ); m0.nextLevel( i ); m0.updatePriority( finishX, finishY ); // if it is not in the open list then add into that if( open_nodes_map[ydy][xdx] == 0 ) { open_nodes_map[ydy][xdx] = m0.getPriority(); nodeList[pqIndex].push( m0 ); // mark its parent node direction dir_map[ydy][xdx] = ( i + DIRECTION_COUNT / 2 ) % DIRECTION_COUNT; } else if( open_nodes_map[ydy][xdx] > m0.getPriority() ) { // update the priority info open_nodes_map[ydy][xdx] = m0.getPriority(); // update the parent direction info dir_map[ydy][xdx] = ( i + DIRECTION_COUNT / 2 ) % DIRECTION_COUNT; // replace the node // by emptying one nodeList to the other one // except the node to be replaced will be ignored // and the new node will be pushed in instead while ( !( nodeList[pqIndex].front().getX() == xdx && nodeList[pqIndex].front().getY() == ydy ) ) { nodeList[1 - pqIndex].push( nodeList[pqIndex].front() ); nodeList[pqIndex].pop(); } nodeList[pqIndex].pop(); // remove the wanted node // empty the larger size nodeList to the smaller one if( nodeList[pqIndex].size() > nodeList[ 1 - pqIndex ].size() ) pqIndex = 1 - pqIndex; while( !nodeList[pqIndex].empty() ) { nodeList[1-pqIndex].push(nodeList[pqIndex].front()); nodeList[pqIndex].pop(); } pqIndex = 1 - pqIndex; nodeList[pqIndex].push( m0 ); // add the better node instead } } } } return ""; // no route found } Output: Legends . = PATH ? = START X = FINISH 3,2,1 = OBSTACLES (Just right) From what I read about Java's documentation, I came up with the conclusion: C++'s std::queue<T>::front() == Java's LinkedList<T>.peek() Java's LinkedList<T>.pop() == C++'s std::queue<T>::front() + std::queue<T>::pop() What might I be missing in my Java version? In what way does it became different algorithmically from the C++ version?

Read the article

My VB crushes for a pre-header non recognized

- by Newben

I have a great problem to deal : no access anymore to Ubuntu through my VirtualBox. I always have the same message Session failed to Open Could not open the medium '/Users/me/VirtualBox VMs/Ubuntu/Ubuntu.vdi'. VDI: error reading pre-header in '/Users/me/VirtualBox VMs/Ubuntu/Ubuntu.vdi' (VERR_DEV_IO_ERROR). VD: error VERR_VD_VDI_INVALID_HEADER opening image file '/Users/me/VirtualBox VMs/Ubuntu/Ubuntu.vdi' (VERR_VD_VDI_INVALID_HEADER). Code d'erreur : NS_ERROR_FAILURE (0x80004005) Composant : Medium Interface : IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} I tried to follow this post explaining how to mount manually the vdi file. But I can't open my 6go sized file nor with HexFiend, nor with 0exED... And if I did, how do I find the pre-header ?

Read the article

Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

- by ScottGu

I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3. You can download and install ASP.NET MVC 3 here. The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features. Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine). Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach. Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries. ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server. This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends. We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project). Previous releases of ASP.NET MVC included the core jQuery library. ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios). We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation). Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3. This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model. ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4. ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated. This enables richer scenarios where you can validate the current value based on another property of the model. We’ve shipped a built-in [Compare] validation attribute with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC. This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications. These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support). The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project. It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers). You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing. This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server. The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site. It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers. You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner. Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead. Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3. The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release. MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes. Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English. We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days. I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries). You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable. The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects. NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet. The site also now allows developers to optionally submit new packages that they wish to share with others. You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today. We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5. IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios. It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS. Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk. It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server. The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express. Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables. SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4). SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it. You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine. No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded. SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax. This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE. This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios. With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET). This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments. Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE. It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects. Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables. Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2. These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0. Orchard is a free, open source, community based project. It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard). Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage). Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it. WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development. It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla). Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites. WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination. It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer. Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better. A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

How to Use Windows’ Advanced Search Features: Everything You Need to Know

- by Chris Hoffman

You should never have to hunt down a lost file on modern versions of Windows — just perform a quick search. You don’t even have to wait for a cartoon dog to find your files, like on Windows XP. The Windows search indexer is constantly running in the background to make quick local searches possible. This enables the kind of powerful search features you’d use on Google or Bing — but for your local files. Controlling the Indexer By default, the Windows search indexer watches everything under your user folder — that’s C:\Users\NAME. It reads all these files, creating an index of their names, contents, and other metadata. Whenever they change, it notices and updates its index. The index allows you to quickly find a file based on the data in the index. For example, if you want to find files that contain the word “beluga,” you can perform a search for “beluga” and you’ll get a very quick response as Windows looks up the word in its search index. If Windows didn’t use an index, you’d have to sit and wait as Windows opened every file on your hard drive, looked to see if the file contained the word “beluga,” and moved on. Most people shouldn’t have to modify this indexing behavior. However, if you store your important files in other folders — maybe you store your important data a separate partition or drive, such as at D:\Data — you may want to add these folders to your index. You can also choose which types of files you want to index, force Windows to rebuild the index entirely, pause the indexing process so it won’t use any system resources, or move the index to another location to save space on your system drive. To open the Indexing Options window, tap the Windows key on your keyboard, type “index”, and click the Indexing Options shortcut that appears. Use the Modify button to control the folders that Windows indexes or the Advanced button to control other options. To prevent Windows from indexing entirely, click the Modify button and uncheck all the included locations. You could also disable the search indexer entirely from the Programs and Features window. Searching for Files You can search for files right from your Start menu on Windows 7 or Start screen on Windows 8. Just tap the Windows key and perform a search. If you wanted to find files related to Windows, you could perform a search for “Windows.” Windows would show you files that are named Windows or contain the word Windows. From here, you can just click a file to open it. On Windows 7, files are mixed with other types of search results. On Windows 8 or 8.1, you can choose to search only for files. If you want to perform a search without leaving the desktop in Windows 8.1, press Windows Key + S to open a search sidebar. You can also initiate searches directly from Windows Explorer — that’s File Explorer on Windows 8. Just use the search box at the top-right of the window. Windows will search the location you’ve browsed to. For example, if you’re looking for a file related to Windows and know it’s somewhere in your Documents library, open the Documents library and search for Windows. Using Advanced Search Operators On Windows 7, you’ll notice that you can add “search filters” form the search box, allowing you to search by size, date modified, file type, authors, and other metadata. On Windows 8, these options are available from the Search Tools tab on the ribbon. These filters allow you to narrow your search results. If you’re a geek, you can use Windows’ Advanced Query Syntax to perform advanced searches from anywhere, including the Start menu or Start screen. Want to search for “windows,” but only bring up documents that don’t mention Microsoft? Search for “windows -microsoft”. Want to search for all pictures of penguins on your computer, whether they’re PNGs, JPEGs, or any other type of picture file? Search for “penguin kind:picture”. We’ve looked at Windows’ advanced search operators before, so check out our in-depth guide for more information. The Advanced Query Syntax gives you access to options that aren’t available in the graphical interface. Creating Saved Searches Windows allows you to take searches you’ve made and save them as a file. You can then quickly perform the search later by double-clicking the file. The file functions almost like a virtual folder that contains the files you specify. For example, let’s say you wanted to create a saved search that shows you all the new files created in your indexed folders within the last week. You could perform a search for “datecreated:this week”, then click the Save search button on the toolbar or ribbon. You’d have a new virtual folder you could quickly check to see your recent files. One of the best things about Windows search is that it’s available entirely from the keyboard. Just press the Windows key, start typing the name of the file or program you want to open, and press Enter to quickly open it. Windows 8 made this much more obnoxious with its non-unified search, but unified search is finally returning with Windows 8.1.

Read the article

Set the Minimum and Maximum Tab Widths in Firefox without an Add-on

- by Lori Kaufman

If you tend to have a lot of tabs open in Firefox, there may be times when you can’t see all the tabs you have open, and you need to navigate among your tabs using the tab scrolling arrows. There are add-ons available for Firefox that will make multiple rows of tabs, such as Tab Utilities. However, this still may not be ideal, as it takes a lot of screen real estate when you have a lot of tabs open. There’s an easy way to set the width of the tabs, so they still display text or website icons, and, at the same time, allow more tabs to be visible. To change the width of the tabs, enter “about:config” in the address bar in Firefox and press Enter. HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

Read the article

Add Background Images and Themes to Windows 7 Media Center

- by DigitalGeekery

Are you tired of the same Windows Media Center look and feel? Today we’ll show you how change the background and apply themes to WMC. Changing the Basic Color Scheme in WMC There are a couple of very basic color scheme options built in to Windows 7 Media Center. From the WMC Start Menu, select Settings on the Tasks strip and then select General. On the General settings screen select Visual and Sound Effects. Under Color scheme you’ll find options for Windows Media Center standard, High contrast white, and High contrast black. Simply select a color scheme and click Save before exiting. If you have used Media Center before you are familiar with the standard blue default theme. There is also the high contrast white. And, the high contrast black. Changing the Background Image with Media Center Studio Themes and custom backgrounds need to be added with the third-party software, Media Center Studio. You can find the download link at the end of this article. You can use your own high resolution photo, or download one from the Internet. For best results, you’ll want to find an image that meets or exceeds the resolution of your monitor. Also, using a darker colored background image is ideal as it should contrast better with the lighter colored text of the start menu. Once you’ve downloaded and installed Media Center Studio (link below), open the application select the Home tab on the ribbon and make sure you are on the Themes tab below. Click New. Select Biography from the left pane and type in a name for your new theme. Next, click on the triangle next to Images to expand the list below. You’ll want to browse to Images > Common > Background. You should see a list of PNG image files located below Background. We will want to swap out the COMMON.ANIMATED.BACKGROUND.PNG and the COMMON.BACKGROUND.PNG images. Select COMMON.ANIMATED.BACKGROUND.PNG and click on the Browse button on the right. Browse for your photo and click Open. Your selected image will appear on the left pane. Now, do the same for the COMMON.BACKGROUND.PNG. When finished, select the Home tab on the ribbon at the top and click Save. Now switch to the Themes tab on the ribbon and the Themes tab below. (There are two Themes tabs which can be a bit confusing). Select your theme on the right pane and click Apply. Note: You won’t see the image backgrounds displayed. Your theme will be applied to Media Center. Close out of Media Center Studio and open Windows Media Center to check out your new background. You can load multiple backgrounds images and switch them periodically as your mood changes. You might like to find a nice background featuring your favorite movie or TV show. Perhaps you can even find a background of your favorite sports team. Installing Themes with Media Center Studio Theme7MC has made available a small group of Media Center Studio Theme packs that are simple to download and install. You can find the download link below. Note: Before installing a theme, turn off any extenders and close Windows Media Center. Download any (or all) of the Theme7MC theme packages to your Media Center PC. Open Media Center Studio, select the Themes tab (the one at the top) and click Import Theme. Browse for the theme you wish to import and click Open. Select your theme from the themes pane and click Apply. Media Center Studio will proceed to apply your theme. You should then see your new theme appear under Current theme on the left theme pane. Close out of Media Center Studio. Open Media Center and enjoy your new theme. Conclusion Media Center Studio runs on Windows 7 or Vista and gives users a solution for personalizing their Media Center backgrounds. It is a Beta application, however, so it still has a few bugs. Currently, there are only a handful of themes available at Themes7MC, but what they have is pretty slick. If you’d like to further customize the look of Media Center, check out our previous article on how to customize the Media Center start menu with Media Center Studio. Downloads Media Center Studio Theme7MC Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

Read the article

Commercial Drupal Modules & Themes

- by Ravish

A discussion at Drupal.org forums prompted me to give my input about commercial ecosystem around Open Source Content Management Systems. WordPress and Joomla have been growing rapidly since past few years. But, growth rate of Drupal seems to be almost flat. Despite being the most powerful CMS around, Drupal is still not being adopted by masses. Many people will argue that Drupal is not targeted towards masses, but developers. I agree, Drupal is more of a development platform than a consumer CMS. Drupal is ‘many things to many people’, and I can build almost any type of website with it. Drupal is being used for building blogs, corporate websites, Intranet portals, social networking and even a project management system. Looking at the wide array of Drupal implementations, it deserves to be the most widely adopted CMS. I believe there are few challenges that Drupal community needs to overcome. To understand these challenges, I surveyed some webmasters who use Joomla or WordPress but not Drupal. I asked them why they don’t want to use Drupal, following are the responses I got from them: Drupal is too complicated, takes time to learn. Drupal is great, but its admin panel is overwhelming. I couldn’t find any nice themes for Drupal. There is no WYSIWYG editor in Drupal. Most Drupal modules do not work out of the box. There aren’t enough modules like Ubercart which provides any out of the box functionality. I tried modules like CCK, Views and Panels. After wasting several hours struggling with them, I decided to give up on Drupal. I don’t use Drupal because of pushbutton and Garland theme. I had hard time trying to customize Garland and it messed up the whole layout. There are no premium modules and themes for Drupal. Joomla has tons of awesome themes and modules. I don’t want a million hacks like CCK, Views, Tokens, Pathauto, ImageCache and CTools just to run a simple website. Most of the complaints from users are related to the learning and development curve involved with Drupal, and the lack of ecosystem. While most of the problems will be gone in Drupal 7, ecosystem is something that needs to be built by the Drupal community. Drupal distributions are a great step forward. There are few awesome Drupal distributions available like Open Publish, Open Atrium and Drupal Commons. I predict, there will be a wave of many powerful Drupal distributions after Drupal 7 release. Many of them will be user-friendly and commercial supported. Following is my post at Drupal.org forums: Quote from: http://drupal.org/node/863776#comment-3313836 Brian Gardner (StudioPress) and Woo Themes launched premium WordPress themes in 2007, the developer community did not accept it at first. Moreover, they were not even GPL licensed. There was an outcry in WordPress community against them. Following that, most premium theme providers switched to GPL licensing. Despite controversies, users voted for premium theme and plugins by buying them. Inspired by their success, hundreds of other developers started to sell premium themes and plugins. It is now the acceptable and in fact most popular business model among WordPress community. Matt Mullenweg once told me, they would not support premium themes. If he supported, developers would no more give out free GPL themes & plugins. He pointed me towards Joomla, there were hardly any nice free themes & modules available. Now two years forward, premium products are not just accepted but embraced by the WordPress community – http://wordpress.org/extend/themes/commercial/ The quality and number of themes & modules has increased, even the free ones. This also helped to boost the adoption and ecosystem of WordPress. Today, state of Drupal is like WordPress was in 2007. There are hardly any out of the box solutions available for Drupal. Ubercart, Open Publish and Open Atrium are the only ones I can think of. Many of the popular Drupal modules are patches and hole-fillers. Thankfully, these hole-filler modules are going to be in Drupal 7 core. Drupal 7 and distributions will spawn a new array of solutions built upon Drupal. Soon, we will have more like Ubercarts and Open Atriums. If commercial solutions can help fuel this ecosystem and growth, Drupal community will accept them eventually. This debate will not stop your customers from buying your product. If your product is awesome, they will vote for you by buying your product.

Read the article

Diving into OpenStack Network Architecture - Part 1

- by Ronen Kofman

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment. We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf Bridge br-int Port br-int Interface br-int type: internal Port "int-br-eth2" Interface "int-br-eth2" Bridge "br-eth2" Port "br-eth2" Interface "br-eth2" type: internal Port "eth2" Interface "eth2" Port "phy-br-eth2" Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d Bridge br-int Port "int-br-eth2" Interface "int-br-eth2" Port br-int Interface br-int type: internal Port "qvocb64ea96-9f" tag: 1 Interface "qvocb64ea96-9f" Bridge "br-eth2" Port "phy-br-eth2" Interface "phy-br-eth2" Port "br-eth2" Interface "br-eth2" type: internal Port "eth2" Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo Link encap:Local Loopback LOOPBACK MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) my-port Link encap:Ethernet HWaddr 22:04:45:E2:85:21 BROADCAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0 Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) veth1 Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name bridge id STP enabled interfaces br-eth3 8000.00505682e7f6 no eth3 veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

Search Results

Search found 28919 results on 1157 pages for 'open with'.

Page 194/1157 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201 | Next Page >

- by MvG

- by namkid

- by Haris

- by viktiglemma

- by user73006

- by porec

- by Tom Gullen

- by Mala Narasimharajan

- by MrOodles

- by deadlydog

- by user285207

- by nubela

- by semmelbroesel

- by Trevor Bekolay

- by Drew S

- by venkatx5

- by Shayan Abbas

- by mr5

- by Newben

- by ScottGu

- by Chris Hoffman

- by Lori Kaufman

- by DigitalGeekery

- by Ravish

- by Ronen Kofman

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201 | Next Page >