Search Results

Search found 5653 results on 227 pages for 'zero cool'.

Page 194/227 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Home and Small to Medium Enterprise network manufacturer choice, Netgear, Linksys or D-Link ?

  - by Kedare

  (Please don't close this post, it's a serious post so... Be cool, no trolls please, I need an answer ;p) Hello, I am looking for an alternative to Cisco (too expensive for me !) for semi-pro utilization (at home but with advanced feature (I'm studying in IT)) and in small/medium enterprises. I think I will choose between LinkSys (Including Cisco Small Business), Netgear and D-Link, but I've never really used these products, that what I need is a manufacturer that make "almost" all type of networking equipment (Like Cisco but cheaper..), here are my needs : I need almost all my products to be rackable I need a good warranty (Netgear lifetime waranty rulez!) I need an "unified" network environment I made a little comparison of the characteristics that interest me after hours of search on Internet (based on result found on many websites): (Prices are based on the ldlc-pro.com french website) Hotline/Support Quality: Netgear : Not so bad Linksys : Not so bad D-Link : Poor! Most common Warranty: Netgear : Unlimited Lifetime Warranty! Linksys : Limited 3 years warranty D-Link : Limited 5 years warranty (Unlimited in US but I'm on France :(...) VPN protocols compatibles with routers on endpoint mode: Netgear : Only IPSEC :( Linksys : IPSEC, PPTP, L2TP D-Link : IPSEC, PPTP, L2TP Cheaper 8 ports Gb switch : Netgear : 30€ Linksys : 47€ D-Link : 30€ Cheaper 48 ports + 1Gb uplink(s) administrable switch : Netgear : 263€ Linksys : 630€ D-Link : 600€ Cheaper VPN router : Netgear : 100€ Linksys : 80€ D-Link : 60€ Cheaper rackable switch : Netgear : 50€ Linksys : 87€ D-Link : 50€ Cheaper rackable and administrable switch : Netgear : 120€ Linksys : 370€ D-Link : 171€ Netgear and D-Link are in the same range of price, where Linksys is more expensives. I've searched for some other criteria ( the full comparison is here, in french with shop/source links: http://forums.jeuxonline.info/showthread.php?t=1072280 ) and made a final score for each manufacturer : SCORE including IP camera sub-score: Netgear : 6.2/10 Linksys : 7.3/10 D-Link : 7.0/10 SCORE excluding IP camera sub-score: Netgear : 6.9/10 Linksys : 7.0/10 D-Link : 6.7/10 On both case, Linksys wins. So here is my little comparison, but because I've never really used these stuffs, I need your help to make a decision on witch manufacturer choose for both my personnal and corporate use. So here are the questions : What manufacturer do you recommend me (Not cisco (except Small business)) ? Why ? Have you called the call center of the customer support of one of these manufacturer ? How it was ? Did you had problems or bad experiences with these equipments ? Any other advices ? ;) Thank you !

  Read the article

• UNIX - mount: only root can do that

  - by Travesty3

  I need to allow a non-root user to mount/unmount a device. I am a total noob when it comes to UNIX, so please dumb it down for me. I've been looking all over teh interwebz to find an answer and it seems everyone is giving the same one, which is to modify /etc/fstab to include that device with the 'user' option (or 'users', tried both). Cool, well I did that and it still says "mount: only root can do that". Here are the contents of my fstab: # /etc/fstab: static file system information. # # Use 'vol_id --uuid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 # / was on /dev/mapper/minicc-root during installation UUID=1a69f02a-a049-4411-8c57-ff4ebd8bb933 / ext3 relatime,errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=038498fe-1267-44c4-8788-e1354d71faf5 /boot ext2 relatime 0 2 # swap was on /dev/mapper/minicc-swap_1 during installation UUID=0bb583aa-84a8-43ef-98c4-c6cb25d20715 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/scd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sdb1 /mnt/sdcard auto auto,user,rw,exec 0 0 My thumb drive partition shows up as /dev/sdb1. I'm pretty sure my fstab is set up OK, but everyone on the other posts seems to fail to mention how they actually call the 'mount' command once this entry is in the fstab file. I think this is where my problem may be. The command I use to mount the drive is: $ mount /dev/sdb1 /mnt/sdcard. /bin/mount is owned by root and is in the root group and has 4755 permissions. /bin/umount is owned by root and is in the root group and has 4755 permissions. /mnt/sdcard is owned by me and is in one of my groups and has 0755 permissions. My mount command works fine if I use sudo, but I need to be able to do this without sudo (need to be able to do it from a PHP script using shell_exec). Any suggestions? Sorry for making you read so much...just trying to get as much info in the initial post as possible to preemptively answer questions about configuration stuff. If I missed anything tho, ask away. Thanks! -Travis

  Read the article

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• Determining the health of a Cisco switch port?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• Help with Windows 7 BSOD with windbg minidump !analyze -v results

  - by Kurt Harless

  Hi gang, Windows 7 X64 Ultimate is BSODing occasionally. I suspect an overheating issue or something related to the use of my GTX-295 card that runs very hot. Here is an !analyze -v listing of the most recent minidump. Any and all help greatly appreciated. Kurt Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\122810-31387-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16617.amd64fre.win7_gdr.100618-1621 Machine Name: Kernel base = 0xfffff800`03065000 PsLoadedModuleList = 0xfffff800`032a2e50 Debug session time: Tue Dec 28 11:04:03.597 2010 (UTC - 7:00) System Uptime: 2 days 2:28:40.407 Loading Kernel Symbols ............................................................... ................................................................ .............................................. Loading User Symbols Loading unloaded module list ................ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff800033b8873, fffff8800e322dc0, 0} Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeStrings+c3 ) Followup: MachineOwner --------- 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_SERVICE_EXCEPTION (3b) An exception happened while executing a system service routine. Arguments: Arg1: 00000000c0000005, Exception code that caused the bugcheck Arg2: fffff800033b8873, Address of the instruction which caused the bugcheck Arg3: fffff8800e322dc0, Address of the context record for the exception that caused the bugcheck Arg4: 0000000000000000, zero. Debugging Details: ------------------ EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. FAULTING_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] CONTEXT: fffff8800e322dc0 -- (.cxr 0xfffff8800e322dc0) rax=0000000000000041 rbx=fffff8a015a3c1c0 rcx=0000000000000024 rdx=0000000000000003 rsi=fffff8800e3238b0 rdi=0000000000000009 rip=fffff800033b8873 rsp=fffff8800e323798 rbp=000000000000000d r8=fffff8a018cb374c r9=000000200a98fdc4 r10=fffff8800e323988 r11=fffff8800e32398e r12=fffff8a018127c18 r13=fffff8800126e550 r14=0000000000000001 r15=fffffa800abe1570 iopl=0 nv up ei pl nz ac po nc cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010216 nt!RtlCompareUnicodeStrings+0xc3: fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] ss:0018:fffff880`0e3237b0=???????????????? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x3B PROCESS_NAME: ccSvcHst.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff800033b8873 STACK_TEXT: fffff880`0e323798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!RtlCompareUnicodeStrings+0xc3 FOLLOWUP_IP: nt!RtlCompareUnicodeStrings+c3 fffff800`033b8873 488b7c2418 mov rdi,qword ptr [rsp+18h] SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: nt!RtlCompareUnicodeStrings+c3 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4c1c44a9 STACK_COMMAND: .cxr 0xfffff8800e322dc0 ; kb FAILURE_BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 BUCKET_ID: X64_0x3B_nt!RtlCompareUnicodeStrings+c3 Followup: MachineOwner ---------

  Read the article

• Forward all traffic through an ssh tunnel

  - by Eamorr

  I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

  Read the article

• shell script to start multiple Java programs from a directory at boot

  - by zcourts

  I'm not sure if this is the best approach to this, It's my first time doing all of this (including writing shell scripts). OS: Centos My problem: I want to start multiple shell scripts at boot. One of the shell scripts is to start my own services and 3 others are for third party services. The shell script to start my own services will be looking for jar files. I currently have two services (will change), written in Java. All services are named under convention prefix-service-servicename What I've done: I created the following directory structure /home/username/scripts init.sh boot/ boot/startthirdprtyservice1.sh boot/startthirdprtyservice2.sh boot/startthirdprtyservice3.sh boot/startmyservices.sh /home/username/services prefix-lib-libraryname.jar prefix-lib-libraryname.jar prefix-service-servicename.jar prefix-service-servicename.jar prefix-service-servicename.jar In init.sh I have the following: #!/bin/sh #This scripts run all executable scripts in the boot directory at boot #done by adding this script to the file /etc/rc.d/rc.local #nohup #run-parts /home/username/scripts/boot/* #for each file in the boot dir... # ignore the HUP (hangup) signal for s in ./boot/*;do if [ -x $s ]; then echo "Starting $s" nohup $s & fi done echo "Done starting bootup scripts " echo "\n" In the script boot/startmyservices.sh I have #!/bin/sh fnmatch () { case "$2" in $1) return 0 ;; esac ; return 1 ; } ##sub strin to match for SUBSTRING="prefix-service" for s in /home/username/services/*;do if [ -x $s ]; then #match service in the filename , i.e. only services are started if fnmatch "$SUBSTRING" "$s" ; then echo "Starting $s " nohup $s & fi fi done echo "Done starting Services" echo "\n" Finally: Usually you can stick a program in /etc/rc.d/rc.local for it to be run at boot but I don't think this works in this case, or rather I don't know what to put in there I've just learnt how to do this by reading up a bit so I'm not sure its particularly the best thing to do so any advice is appreciated. When I run init.sh nohup.out contains Starting the thirdparty daemon... thirdparty started... .... but nothing from myservices.sh and my Java services aren't running I'm not sure where to start debugging or what could be going wrong. Edit Found some issues and got it to work, used -x instead of -n to check if the string is none zero, needed the sub string check to also be if [[ $s = $SUBSTRING ]] ; then and this last one was just stupid, missing java -jar in front of $s Still unsure of how to get init.sh to run at boot though

  Read the article

• Blank Page: wordpress on nginx+php-fpm

  - by troutwine

  Good day. While this post discusses a similar setup to mine serving blank pages occasionally after having made a successful installation, I am unable to serve anything but blank pages. My setup: Wordpress 3.0.4 nginx 0.8.54 php-fpm 5.3.5 (fpm-fcgi) Arch Linux Configuration Files php-fpm.conf: [global] pid = run/php-fpm/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 listen.owner = www listen.group = www listen.mode = 0660 user = www group = www pm = dynamic pm.max_children = 50 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 nginx.conf: user www; worker_processes 1; error_log /var/log/nginx/error.log notice; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; gzip on; include /etc/nginx/sites-enabled/*.conf; } /etc/nginx/sites-enabled/blog_sharonrhodes_us.conf: upstream php { server 127.0.0.1:9000; } server { error_log /var/log/nginx/us/sharonrhodes/blog/error.log notice; access_log /var/log/nginx/us/sharonrhodes/blog/access.log; server_name blog.sharonrhodes.us; root /srv/apps/us/sharonrhodes/blog; index index.php; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content try_files $uri $uri/ /index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; #NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini include fastcgi_params; fastcgi_intercept_errors on; fastcgi_pass php; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } }

  Read the article

• RHEL5: Can't create sparse file bigger than 256GB in tmpfs

  - by John Kugelman

  /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

  Read the article

• Does a router have a receiving range?

  - by Aadit M Shah

  So my dad bought a TP-Link router (Model No. TL-WA7510N) which apparently has a transmitting range of 1km; and he believes that it also has a receiving range of 1km. So he's arguing with me that the router (which is a trans-receiver) can communicate with any device in the range of 1km whether or not that device has a transmitting range of 1km. To put it graphically: +----+ 1km +----+ | |------------------------------------------------->| | | TR | | TR | | | <----| | +----+ 100m+----+ So here's the problem: The two devices are 1km apart. The first device has a transmitting range of 1km. The second device only has a transmitting range of 100m. According to my dad the two devices can talk to each other. He says that the first device has a transmitting and a receiving range of 1km which means that it can both send data to devices 1km away and receive data from devices 1km away. To me this makes no sense. If the second device can only send data to devices 100m away then how can the first device catch the transmission? He further argues that for bidirectional communication both the sender and the reciver should have overlapping areas of transmission: According to him if two devices have an overlapping area of transmission then they can communicate. Here neither device has enough transmission power to reach the other. However they have enough receiving power to capture the transmission. Obviously this makes absolutely no sense to me. How can a device sense a transmission which hasn't even reached it yet and go out, capture it and bring it back it. To me a trans-receiver only has a transmission power. It has zero receiving power. Hence for two devices to be able to communicate bidirectionally, the diagram should look like: Hence, from my point of view, both the devices should have a transmission range far enough to reach the other for bidirectional communication to be possible; but no matter how much I try to explain to my dad he adamantly disagrees. So, to put an end to this debate once and for all, who is correct? Is there even such a thing as a receiving range? Can a device fetch a transmission that would otherwise never reach it? I would like a canonical answer on this.

  Read the article

• RAID 50 24Port Fast Writes Slow Reads - Ubuntu

  - by James

  What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

  Read the article

• How can I repair my USB drive?

  - by yurko

  USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

  Read the article

• Some apps very slow to load on Windows 7, copy & paste very slow.

  - by Mike

  Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

  Read the article

• LDAP installed, running, but can't connect remotely [Ubuntu 10.10]

  - by Casey Jordan

  Hi all, I installed LDAP on my ubuntu 10.10 system, using the tutorial found here: https://help.ubuntu.com/10.10/serverguide/C/openldap-server.html Everything seems to be working well, when logged into the server via ssh I can run commands like: > ldapsearch -xLLL -b "dc=easydita,dc=com" uid=john sn givenName cn dn: uid=john,ou=people,dc=easydita,dc=com sn: Doe givenName: John cn: John Doe So I think that's a good sign that things are working well. However I have had zero luck connecting to the server remotely via GUI tools or command line. I have tied JXplorer, and LDAP administration tool. Running commands like this: > ldapsearch -xLLL -W -H ldap://ice.rit.edu -d1 "dc=easydita,dc=com" ldap_url_parse_ext(ldap://ice.rit.edu) ldap_create ldap_url_parse_ext(ldap://ice.rit.edu:389/??base) Enter LDAP Password: ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP ice.rit.edu:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 34 bytes to sd 3 ldap_result ld 0xb8940170 msgid 1 wait4msg ld 0xb8940170 msgid 1 (infinite timeout) wait4msg continue ld 0xb8940170 msgid 1 all 1 ** ld 0xb8940170 Connections: * host: ice.rit.edu port: 389 (default) refcnt: 2 status: Connected last used: Thu Mar 17 19:42:29 2011 ** ld 0xb8940170 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0xb8940170 request count 1 (abandoned 0) ** ld 0xb8940170 Response Queue: Empty ld 0xb8940170 response count 0 ldap_chkResponseList ld 0xb8940170 msgid 1 all 1 ldap_chkResponseList returns ld 0xb8940170 NULL ldap_int_select read1msg: ld 0xb8940170 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 16 contents: read1msg: ld 0xb8940170 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0xb8940170 0 new referrals read1msg: mark request completed, ld 0xb8940170 msgid 1 request done: ld 0xb8940170 msgid 1 res_errno: 49, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_bind: Invalid credentials (49) I am pretty sure that I set up the admin password correctly, but the tutorial was not very specific about that. (Also could not find instructions on how to reset admin password.) Additional info: I was told that this file might hold important information so I will post it: /etc/ldap/slapd.d/cn=config/olcDatabase={0}config.ldif dn: olcDatabase={0}config objectClass: olcDatabaseConfig olcDatabase: {0}config olcAccess: {0}to * by dn.exact=cn=localroot,cn=config manage by * break olcRootDN: cn=admin,cn=config structuralObjectClass: olcDatabaseConfig entryUUID: eca09490-e524-102f-87c5-17d7a82e8985 creatorsName: cn=config createTimestamp: 20110317205733Z entryCSN: 20110317205733.193089Z#000000#000#000000 modifiersName: cn=config modifyTimestamp: 20110317205733Z Given that it seems I have this almost set up correctly is there any steps I can take to correct this? Thanks, Casey

  Read the article

• Areca 1280ml RAID6 volume set failed

  - by Richard

  Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• Installing the Newest KeePass for MacOSX from Source

  - by firebush

  I've transitioned our passwords to KeePass. LastPass looks cool, but I prefer a system where we control the database locally rather than it being kept in the cloud. I have a windows and Linux system and both are able to access our KeePass database easily. On my Linux system (Ubuntu), I simply installed KeePass via synaptic and it just worked. So everything was working great, until my wife tried to set up things on her MacBook to access the database. Huge problems. It was so easy on Linux that I didn't expect there to be issues there. In case it's helpful, she's running a fresh install of Mac OSX 10.5.8, Leopard. We simply went to the download site for KeePass: http://keepass.info/download.html Clicked on the link titled KeePass 2.x for Mac OS X from which we retrieved Mono 2.10.5 and KeePass 2.18 from that site (the packages posted there at the time of this writing). Mono installed without problems (at least, none that we saw). She opened the KeePass image and dragged it to the Application side, unpackaging it there. According to the instructions on the KeePass installation instructions, she opened a terminal, changed to the directory in /Applications containing KeePass.exe, and ran it through mono: mono KeePass.exe No application opens at all - we see a blip for it, but then it immediately goes away, indicating to us that it is crashing. Also disconcerting, I see that people are throwing fits about copy-and-paste not working for KeePass 2.18 on MacOSX. Judging from the 2.19 addresses the copy/paste issue. I'm hoping that version will solve all our issues. So here's my question: how can I try out 2.19 on her system. It doesn't seem to be packaged like the 2.18 one is. But we're not scared of building it. I see that the source for 2.19 is here (at the bottom of the page). Can I just download that to her machine somewhere and run something to build it? I'm familiar with automake but not with building .NET source, so please answer gently if this is stupidly easy. :^) btw: tomorrow's my wife's birthday, and this is getting her down. If you know how to navigate these issues, it would be a nice birthday gift for her. Thanks in advance! Update I'll post this since it might be helpful to someone else: I got KeePass 2.18 to run by updating Mono to 2.10.9 (rather than the 2.10.5 given by the site above). With the later version of Mono, it runs without crashing. And yet, I do see the copy and paste issue that others see. I can open a database on her machine, but the incorrect data get's copied. So again, can someone help me install KeePass 2.19? Thanks!

  Read the article

• CPU overheating after cleaning it

  - by Roberts

  I wanted to clean my computer CPU heatsink and fan itself, because the temperature is not what I wanted. About (50C ~ 70C). I have Intel Core 2 Duo E4300 @1.8 GHz (LGA775). The heatsink wasn't so scary filled with dust but I wanted to clean it anyway. I didn't know how to get heatsink with fan from the socket. So after 25 minutes I've figured it out. But I didn't know how to get it back on so I spent a lot time getting out the motherboard from the case. The fan and heatsink... The case and all components are clear of dust. (I'm tired now). Then I put all back just the way it was, well did few things on cable management. But the problem was that I didn't know how to connect front audio connectors. I had Windows XP hibernated. So I started the PC and everything was normal, except CMOS memory was clear. I configured the BIOS just the way it was and while I was doing that I saw about 58C CPU temperature and fan at 1789 RPM. Restarted the computer with new settings applied. But Windows halted with Blue Screen (I forgot what error it was but something with KERNEL). Restarted the PC and deleted hibernation session and everything was back normal. But couldn't record any sound from front panel microphone. The problem was that I messed ground wire with mic. Again after fixing it I turned computer on. No problems. The fan currently is noisy and temperature was 78C. The temperature before was 55C - 60C at idle. Now it's about 60C. If I do something then temperature raises to 79C. While speaking in skype the temperature was 82C. Could this problem occur because of the thermal grease (it's old and never replaced)? Edit The problem wasn't in thermal paste (because I didn't touch it). The problem was that I installed heatsink wrong. Now instead of regular 60C CPU temperature the CPU is at 48C (cool).

  Read the article

• Disk IO causing high load on Xen/CentOS guest

  - by Peter Lindqvist

  I'm having serious issues with a xen based server, this is on the guest partition. It's a paravirtualized CentOS 5.5. The following numbers are taken from top while copying a large file over the network. If i copy the file another time the speed decreases in relation to load average. So the second time it's half the speed of the first time. It needs some time to cool off after this. Load average slowly decreases until it's once again usable. ls / takes about 30 seconds. top - 13:26:44 up 13 days, 21:44, 2 users, load average: 7.03, 5.08, 3.15 Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.1%sy, 0.0%ni, 25.3%id, 74.5%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1048752k total, 1041460k used, 7292k free, 3116k buffers Swap: 2129912k total, 40k used, 2129872k free, 904740k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1506 root 10 -5 0 0 0 S 0.3 0.0 0:03.94 cifsd 1 root 15 0 2172 644 556 S 0.0 0.1 0:00.08 init Meanwhile the host is ~0.5 load avg and steady over time. ~50% wait Server hardware is dual xeon, 3gb ram, 170gb scsi 320 10k rpm, and shouldn't have any problems with copying files over the network. disk = [ "tap:aio:/vm/dev01.img,xvda,w" ] I also get these in the log INFO: task syslogd:1350 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syslogd D 00062E4F 2208 1350 1 1353 1312 (NOTLB) c0ef0ed0 00000286 6e71a411 00062e4f c0ef0f18 00000009 c0f20000 6e738bfd 00062e4f 0001e7ec c0f2010c c181a724 c1abd200 00000000 ffffffff c0ef0ecc c041a180 00000000 c0ef0ed8 c03d6a50 00000000 00000000 c03d6a00 00000000 Call Trace: [<c041a180>] __wake_up+0x2a/0x3d [<ee06a1ea>] log_wait_commit+0x80/0xc7 [jbd] [<c043128b>] autoremove_wake_function+0x0/0x2d [<ee065661>] journal_stop+0x195/0x1ba [jbd] [<c0490a32>] __writeback_single_inode+0x1a3/0x2af [<c04568ea>] do_writepages+0x2b/0x32 [<c045239b>] __filemap_fdatawrite_range+0x66/0x72 [<c04910ce>] sync_inode+0x19/0x24 [<ee09b007>] ext3_sync_file+0xaf/0xc4 [ext3] [<c047426f>] do_fsync+0x41/0x83 [<c04742ce>] __do_fsync+0x1d/0x2b [<c0405413>] syscall_call+0x7/0xb ======================= I have tried disabling irqbalanced as suggested here but it does not seem to make any difference.

  Read the article

• Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

  - by Adam Cameron

  This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch". I have got a single instance of Apache 2.2 running. Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance. Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK. I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance. However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work. If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache. This all used to be fairly straight fwd under older versions of CF and JRun :-( The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page, but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances. I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where. I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks. PS: tried to specifically tag this as "ColdFusion-10" as the answer will be different from previous CF versions, but it won't let me cos my rep on this site is too low (odd how it doesn't consider my rep from other S/O sites...). If someone with sufficient rep can add it, that'd be cool: it's probably a valid tag to have. Ta.

  Read the article

• what can cause a folder to become indestructible?

  - by JustJeff

  I have a directory that I want to delete, but windows (xp sp3) is giving me the run-around and the folder is now effectively indestructible. Attempts to open the folder, either via explorer or cmd.exe are met with 'd:/temp/foo Is Not Accessible. Access is denied'. Attempts to delete the folder result in 'Cannot delete foo: The directory is not empty' So I can't delete it because supposedly it's not empty, but windows won't let me in it for some reason, so I can't clean it out first. There's nothing in it of consequence, and basically I just want to delete it at this point. Thinking that some other process must have a lock on it, I used the SysInternals 'handles' and Process Explorer to look for open handles with the directory name. These turned up no matches. (The directory name is not actually 'foo', it is something more unique but 'foo' is easier to type here). I put the machine through a restart, and the problem persists. I did a search for the folder name with regedit, to see what other apps might be aware of it. No match. The properties dialog was mildly interesting. The Read-Only attribute is 'semi-checked', i.e., the grayish check mark you get when some parts are and some parts aren't. Naturally I immediately unchecked this, and tried to delete the folder. No go. Opening properties again reveals the gray check mark next to Read-Only has returned. All the stats, size, size on disk, files, folders, all these are zero. There do not appear to be any shares on the folder, so that's not it either. Finally, I tried opening the partition's properties, and running the Tools/Error Checking utility. This didn't turn up any problems either. Fwiw, this directory was created by [a popular gui zip tool] when I tried to unpack a tar-and-zipped archive created on another system with command line utils. The archive was definitely corrupt, but I've never seen such a file do anything worse than crash the zip app, and certainly never leave permanent glitches in the file system. So what else can possibly be going on to make this folder behave this way?

  Read the article

• Open a terminal window & run command, then close the terminal window if command completed successfully?

  - by Caspar

  I'm trying to write a script to do the following: Open a terminal window which runs a long running command (Ideally) move the terminal window to the top left corner of the screen using xdotool Close the terminal window only if the long running command exited with a zero return code To put it in Windows terms, I'd like to have the Linux equivalent of start cmd /c long_running_cmd if long_running_cmd succeeds, and do the equivalent of start cmd /k long_running_cmd if it fails. What I have so far is a script which starts xterm with a given command, and then moves the window as desired: #!/bin/bash # open a new terminal window in the background with the long running command xterm -e ~/bin/launcher.sh ./long_running_cmd & # move the terminal window (requires window process to be in background) sleep 1 xdotool search --name launcher.sh windowmove 0 0 And ~/bin/launcher.sh is intended to run whatever is passed as a command line argument to it: #!/bin/bash # execute command line arguments $@ But, I haven't been able to get the xterm window to close after long_running_cmd is done. I think something like xterm -e ~/bin/launcher.sh "./long_running_cmd && kill $PPID" & might be what I'm after, so that xterm is launched in the background and it runs ./long_running_cmd && kill $PPID. So the shell in the xterm window then runs the long running command and if it completes successfully, the parent process of the shell (i.e. the process owning the xterm window) is killed, thereby closing the xterm window. But, that doesn't work: nothing happens, so I suspect my quoting or escaping is incorrect, and I haven't been able to fix it. An alternate approach would be to get the PID of long_running_cmd, use wait to wait for it to finish, then kill the xterm window using kill $! (since $! refers to last task started in the background, which will be the xterm window). But I can't figure out a nice way to get the PID & exit value of long_running_cmd out of the shell running in the xterm window and into the shell which launched the xterm window (short of writing them to a file somewhere, which seems like it should be unnecessary?). What am I doing wrong, or is there an easier way to accomplish this?

  Read the article

• configuring slime in emacs

  - by CodeKingPlusPlus

  I am in the process of configuring slime for emacs. So far I have read about basic functionality for common lisp such as C-c C-q which invokes the command slime-close-parens-at-point which places the proper number of parens where your mouse is. Another command that seemed cool was invoked by C-c C-c and it would pass the code you are editing in a buffer to the REPL, and "compile" it. Why won't these commands work for me? Anyway, I have downloaded slime via M-x list-packages and do not seem to have this functionality (C-h w and then any of these commands tells me that these commands do note exist). So, I saw a bunch of other slime extensions such as slime-repl', 'slime-fuzzy' and 'hippie-expand-slime'. So I again usedM-x list-packages` and downloaded them. Still I did not have these commands. Here is the content of my emacs file relevant to slime: ;;;Common Lisp and Slime (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-20130626.1151") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-repl-201000404") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/hippie-expand-slime-20130226.1656") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-fuzzy-20100404") (require 'slime) (setq slime-lisp-implementations `((sbcl ("/usr/bin/sbcl")) (ecl ("/usr/bin/ecl")) (clisp ("/usr/bin/clisp" "-q -I")))) (require 'slime-repl) (require 'slime-fuzzy) (require 'hippie-expand-slime) When I execute M-x slime I get the following message in the inferior-lisp buffer where I can execute common lisp code (however, shouldn't this be the slime-repl since I required it?): STYLE-WARNING: redefining EMACS-INSPECT (#<BUILT-IN-CLASS T>) in DEFMETHOD STYLE-WARNING: Implicitly creating new generic function STREAM-READ-CHAR-WILL-HANG-P. WARNING: These Swank interfaces are unimplemented: (DISASSEMBLE-FRAME SLDB-BREAK-AT-START SLDB-BREAK-ON-RETURN) ;; Swank started at port: 46533. Then a slime-error buffer is created with the contents: Invalid protocol message: Symbol "CREATE-REPL" not found in the SWANK package. Line: 1, Column: 28, File-Position: 28 Stream: #<SB-IMPL::STRING-INPUT-STREAM {10056B9C33}> (:emacs-rex (swank:create-repl nil) "COMMON-LISP-USER" t 5) How should I modify my emacs file to give me the functionality of those commands? In my emacs file am I not loading the necessary files? Do I need to install an additional package? If you need more information let me know! All help is much appreciated!

  Read the article

• Is my Cisco switch port bad?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• APC File Cache not working but user cache is fine

  - by danishgoel

  I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >