Search Results

Search found 5655 results on 227 pages for 'cd smith'.

Page 195/227 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• Error during configuring kerberos5 using macports

  - by ario

  While trying to install libmemcached via MacPorts, I hit the following issue: libmemcached @0.40 +universal ---> Computing dependencies for libmemcached ---> Dependencies to be installed: cyrus-sasl2 kerberos5 ---> Configuring kerberos5 Error: org.macports.configure for port kerberos5 returned: configure failure: command execution failed Error: Failed to install kerberos5 It tells me to look in the log for details. Here's the last bit of the log file: :info:configure checking for setupterm in -lcurses... no :info:configure checking for setupterm in -lncurses... no :info:configure checking for tgetent... no :info:configure configure: error: Could not find tgetent; are you missing a curses/ncurses library? :info:configure configure: error: /bin/sh './configure' failed for appl/telnet :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_kerberos5/kerberos5/work/krb5-1.7.2/src" && ./configure --prefix=/opt/local --disable-dependency-tracking --mandir=/opt/local/share/man :info:configure Exit code: 1 :error:configure org.macports.configure for port kerberos5 returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for kerberos5: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :error:configure Failed to install kerberos5 :debug:configure Registry error: kerberos5 not registered as installed & active. invoked from within "registry_active ${subport}" invoked from within "$workername eval registry_active \${subport}" :notice:configure Please see the log file for port kerberos5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_kerberos5/kerberos5/main.log It seems to say it's missing ncurses. Looks like it's there though, since if I run port installed I see these: ncurses @5.7_0 ncurses @5.9_1 (active) ncursesw @5.7_0 Any ideas on how to get around this error?

  Read the article

• BIOS corrupted? How to proceed? Acer Travelmate 290

  - by dtlussier

  I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

  Read the article

• Why is windows 7 rejecting my key?

  - by acidzombie24

  I'm extremely confused. I have a genuine key and CD (I can take photos) and I am trying to install windows on my new tower. I believe this would be the 3rd PC i installed it (old, laptop now new tower). However i did change the HDD once but i doubt windows would think its a different computer bc of that. After going through phone activation it said i installed it on to many pcs..... i'm extremely confused. I'll be happy to deactivate it off my old tower if i knew how. I already grabbed all the files off of it. I tried to look up the amount of boxes i can install windows home premium on and found this http://en.wikipedia.org/wiki/Windows_7_editions What stuck out was this Maximum physical CPUs supported[40] 1 1 1 2 2 2 My new tower has 4cores (its the intel i7) but has two threads each so it sees 8. Does that have anything to do with this? But apparently ultimate supports '2'. I'm sure windows support more than 2 cpus so... what gives? Actually its physically one CPU so i guess the number of cores doesn't matter? Why is windows 7 rejecting my key?

  Read the article

• What service do you use for music on hold?

  - by Russ Warren

  This may not be a sysadmin question for some, but it is definitely a hurdle I have to jump as the sysadmin for my company. We recently rolled-out a company wide VoiP system (Switchvox, to be exact) that has come preloaded with some royalty-free music on hold. Our customers have been complaining that the music on hold sounds like "funeral music." This may be the case (although I wouldn't want it played at my funeral), but it is all we have and we aren't willing to be sued over using music that isn't properly licensed. So, that brings me to the question asked in the title -- what and/or how do you provide decent music on hold? I'm assuming many people here use a PBX that allows customized music, so this has to apply to many of you. We've been looking at some sites that allow you to download royalty-free music for a one-time fee, but the music seems...lame. Something like a one-year subscription from ibaudio.com seems to be the best bet so far. Have you been able to discover something a little more mainstream for a decent licensing fee? Thank you. EDIT: Our PBX allows the playback of MP3 and OGG files, but does not allow streaming of a live audio source, Internet-based or otherwise. It also does not allow the use of a "line-in" source such as a CD player or radio. Don't let this stop you from sharing your setup, though. I'm interested in hearing what everyone uses!

  Read the article

• Ubuntu 10.04 Keyboard and Mouse Freezing Problem

  - by nitbuntu

  I had a partition setup with Windows XP and Ubuntu 8.04 dual booting. I recently upgraded to Ubuntu 10.04 by installing fresh from CD but leaving the previous /home folder as is. Things seemed to be working fine, but started finding that my mouse and keyboard were freezing. After a quick search on the internet, I found the following suggestions as shown here:- Ubuntu Forums Here the suggestion was to:- Edit /etc/default/grub, go to the line that begins like: GRUB_CMDLINE_LINUX_DEFAULT= Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=off" After that, run this command: sudo update-grub and Reboot This seemed to have resolved the issue but after a couple of days I again find my mouse and keyboard freezing. I also find that my parallel port printer had also stopped working. I have saved the output of dmesg and my syslog. The first can be viewed here but the syslog had too many characters, so if someone can suggest an alternative to freetexthost, I can post it there. Moreover, if there is any other information that should be provided, do let me know. I do hope we can get to the bottom of this issue. Thank you in advance for any help that could be provided.

  Read the article

• Toshiba Satellite U500 - Totally Damaged LCD

  - by ivan

  I accidentally damaged my Toshiba Satellite U500 laptop which resulted in a totally unusable LCD. The LCD panel has some cracks on it, and I can only see black & white spots; the laptop frame became broken/bent to where I can partially see inside the PC; the accident disassembled the CD tray, and bent the keyboard frame (which now has a weird hump). The system is still working though. It responds to my inputs (eg, turning it on/off, typing my password @ Windows Login, etc). What I want to do now is to transfer all of my important data from that laptop to my external drive. But I don't know how since the LCD screen is unreadable. I know I can connect it to an external monitor or a TV (I have a Samsung 1080p TV) but I don't know how. What cable should I purchase to connect the TV? Which ports on the laptop and TV should I connect it to? Do I need press something while/after connecting it? Can I boot my laptop using the TV?

  Read the article

• Hardening non-root standalone Linux Tomcat install

  - by NoozNooz42

  I want to know if you have any tips as to how to strengthen the security of a non-root install of Tomcat in standalone mode once Tomcat is already installed in a non-root account, in standalone mode. I precise this because, for example, I'm not at all interested by the answers given here (because both Java and Tomcat requires root priviledges there to be installed and I've got zero interest in running jsvc): http://serverfault.com/questions/43765 So far, here's what I've done for my non-root standalone Tomcat 6 install: download and install the JRE .bin provided by Oracle/Sun (no need to be root here) (no need for a full JDK anymore right seen that Jasper [Tomcat's JSP engine] has its own compiler now right?) download and tar -xzf tomcat 6 (no need to be root here) set up transparent port-forwarding (must be root here) Note that my distribution is a Debian one and I have exactly zero interest in downloading Debian package / backports / whatever... Because, once again, I DO NOT want to need to be root to install Java & Tomcat. The only moment I needed to be root was to configure the firewall to transparently do the port forwarding 80 <-- 8080 and 443 <-- 8443. I then deleted all the default webapps but one: cd ~/apache-tomcat-6.0.26/webapps rm -rf docs rm -rf examples/ rm -rf manager/ rm -rf ROOT/ What about the directory ~/apache-tomcat-6.0.26/webapps/host-manager, do I need it or can I delete it? So, once I've installed Tomcat standalone in a non-root account (and taken into account that I don't want to enter the root password anymore and that I don't plan to install the whole Apache shebang), what more can I do? Are there connectors I can disable? (how?)

  Read the article

• Is it possible to re-cab an Administrative Install Point?

  - by Nathaniel Bannister

  We have Acrobat 8 Pro at work, and our media was painfully out of date. Rather than install all of the machines at 8.0.0 and then do the 6 or 7 consecutive reboots adobe expects you to be ok with I decided I'd integrate the .msp files into the installer. After reading up on it, I figured out the exact patch order that adobe required, extracted my cd to an Administrative install point, and ran the patches against it: msiexec /a AcroPro.msi /p AcrobatUpd810_efgj_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd811_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd812_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd813_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd816_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd817_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd820_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd822_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd823_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd825_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" msiexec /a AcroPro.msi /p AcrobatUpd826_all_incr.msp TARGETDIR="C:\Acrobat8" /log "output.log" Now I have a AIP that is fully patched to 8.2.6 (Tested working prior to attempting to CAB it), but is absolutely huge (1.2gb) what I would like to do is take the folders within the AIP and put them back into a cab file for the sake of convenience in transferring the files around. I tried the command: cscript "C:\Program Files\Microsoft SDKs\Windows\v7.0\Samples\sysmgmt\msi\scripts\WiMakCab.vbs" AcroPro.msi Data1 /L /C /S Per the guide I was using, while this did produce the cab file I Wanted, however the resulting MSI fails to install with an error 2602: It's been a while since I've done something like this, and it's probably a glaring oversight on my part, but any insight would be much appreciated.

  Read the article

• Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

  - by Keeper Hood

  I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

  Read the article

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Start and shutdown tomcat via ssh

  - by bxshi

  Updated I find out that the path of jdk it using is wrong. eval: 1: /opt/Java/jdk1.6.0_25/jre/bin/java: not found the Java should be lower case java, how is that happen? When I run this script directly on server, it is just okay. I'm trying to start or shutdown tomcat via a remote client. On my server, I've got 3 different tomcat: tomcat1, tomcat2, and tomcat3. Firstly, I've tried to run tomcat_path/bin/shutdown.sh to stop it via ssh, and the command is ssh [email protected] "cd /home/jake/tomcat2/bin;exec bash ./shutdown.sh" both " and ' are tried, but do not work, the output is eval: 1: /opt/Java/jdk1.6.0_25/jre/bin/java: not found it seems that the shell script runs on my local client, because on server it has this file. Is there any way to run a shell script on remote server correctly? updated I've run ssh [email protected] "sh -x /home/jake/tomcat/bin/shutdown.sh > /home/jake/tomcat.log 2>&1" and the output in tomcat.log is : + PRG=/home/jake/tomcat/bin/shutdown.sh + [ -h /home/jake/tomcat/bin/shutdown.sh ] + dirname /home/jake/tomcat/bin/shutdown.sh + PRGDIR=/home/jake/tomcat/bin + EXECUTABLE=catalina.sh + [ ! -x /home/jake/tomcat/bin/catalina.sh ] + exec /home/jake/tomcat/bin/catalina.sh stop eval: 1: /opt/Java/jdk1.6.0_25/jre/bin/java: not found

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Setting up a dualboot by installing cloned partitions using clonezilla

  - by Nimjox

  I'm trying to setup a dual boot system where I have Windows 7 and Linux Mint. Here's the kicker both are partitions I've saved using Clonzezilla from different places and to make matters worse Linux Mint is formated as a LVM. I need both of these images specifically as windows is a corporate image that I must use and the other is a development image that took me a week to setup. I've gotten it almost all working but my issue is that I can't get clonezilla to not mess up the partition table of Windows when installing Mint or vise-vera. I can use the (-k1 option) which doens't copy the partition table but then I have a unusable partition when it clones and I'm not sure how to fix the partition table. Here's what I'm doing: Using Gparted to make partitions sda1 40GB ntfs (windows), sda2 extended 70GB, sda5 lvm2 pv 69.99 GB (Linux), sda3 500MB (GRUB) Clonezilla windows image into sda1 partition (keeping partition table) Clonezilla linux image into sda5 partition (not recreating partition table) After all that I can boot into windows using the default MBR. I can use rescue-repair cd to reinstall GRUB which will see Windows 7 but I can't get it to see the Linux OS. I'm thinking its because of the sda5 partition but I'm not sure any ideas on what I could do to get this working or where I might be going wrong. If there is any additional detail you need please let me know and I'll edit as this is a lot.

  Read the article

• QNAP NAS 509 (LINUX) - how to unmout busy volume and find physical disk?

  - by Horst Walter

  On my NAS QNAP TS 509 I do have a technical issue. I need to run e2fsck. This works fine for me on md0 (see below), but how can I unmount the busy devices md9 and sda4 in order to do the same. Whenever I try, I fail because the device is busy. [This part is solved, see below] In order to further track down the issue, I'd need to sort out the physical disk to device relationship. How can I find out this, e.g. md0 is a stripped volume on 2 disk (but I need to find out on what physical disk). Remark: As you can easily derive from my questions, I am not a Linux expert, but manage to get along. /dev/ram0 124.0M 94.1M 29.8M 76% / tmpfs 32.0M 80.0k 31.9M 0% /tmp /dev/sda4 310.0M 103.9M 206.1M 34% /mnt/ext /dev/md9 509.5M 39.2M 470.2M 8% /mnt/HDA_ROOT /dev/md0 1.8T 1.4T 444.7G 76% /share/MD0_DATA tmpfs 32.0M 0 32.0M 0% /.eaccelerator.tmp -- Added -- QNAP seems to be based on Busybox. I do not find something like init / telinit / runlevel. At busybox docs it says that I need to run the below. But in /var/service sv is not available. I want to go to single user mode to unmount the devices. # cd /var/service # sv d * # sv u getty* -- Added, thanks A4L -- This QNAP Box runs a special flavor of Linux, so not all SOPs do apply. In my particular case I found a services.sh script, stopping all services. After that the drive could be unmounted. The information passed by A4L is valid and worth reading it, maybe I'll profit from it next time. Links: http://unix.stackexchange.com/questions/19918/umount-device-is-busy and http://unix.stackexchange.com/questions/15024/umount-device-is-busy-why So the unmount issue is solved, still looking for the best option to find the physical to volume mapping.

  Read the article

• Deploying workstations - best practices?

  - by V. Romanov

  Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

  Read the article

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• Virtualmin & git integration

  - by weby3456

  I've installed virtualmin on my VPS to manage my websites. It's working perfect and as expected nearly a year now. Recently I wanted to add some features to one of my sites, and I need git integration. I've correctly installed git & gitweb on my server, and I can create repositories and watch them under http://sub.domain.com/git/gitweb.cgi Here is the current relevant directory tree: /home/user/domains/sub.domain.com/public_html/git/ drwxr-sr-x user user . drwxr-x--- user user .. -rw-r--r-- user user git-favicon.png -rw-r--r-- user user git-logo.png -rwxr-xr-x user user gitweb.cgi -rw-r--r-- user user gitweb.css drwxrwx--- apache user reponame.git /home/user/domains/sub.domain.com/public_html/git/reponame.git/ drwxrwx--- apache user . drwxr-sr-x user user .. drwxrwx--- apache user branches -rwxrwx--- apache user config -rwxrwx--- user user description -rwxrwx--- apache user HEAD drwxrwx--- apache user hooks drwxrwx--- apache user info drwxrwx--- apache user objects drwxrwx--- apache user refs But I have some questions: When I'm visiting http://sub.domain.com/git/gitweb.cgi, the owner is listed as 'Apache'. why? how can I change that? Usually, to create a new git repository, I'll do something like: $ mkdir proj $ cd proj $ git init Initialized empty Git repository in /home/user/proj/.git/ // here I'm creating the files or copy them from somewhere else $ git add *.php $ git add README $ git commit -m 'initial version' But after creating the repository in virtualmin, I can find a new dir named 'reponame.git' but not the '.git' dir. When I'm trying to run any git command (e.g. git status) I'm receiving "fatal: This operation must be run in a work tree". How can I work with that repository? Currently I need to explicitly grant access for users to be able to view the repositories via gitweb. How can I make certain repositories public?

  Read the article

• ASUS EAH5450 Graphics Card (ATI Radeon HD5450 - 1 GB DDR3) on Windows 2003? Anybody got it to work?

  - by JJarava

  Hi all! I've just bought an ASUS EAH5450 Graphics Card (ATI Radeon HD5450, 1 GB DDR3) for my main system, but I haven't been able to make it work under Windows 2003 (my OS in that system). When I plugged the card, I got a couple of "installing drivers" prompt for things such as "ATI High Definition Audio Device" that got themselves sorted out of the Internet, and then a "Standard VGA Graphics Adapter". The CD that came with the card installs something called "ATI Catalyst Install Manager" and .net 2.0, but no drivers. I've downloaded the latest (WinXP 32bits) drivers from ATI, and the experience is the same: I don't get any drivers installed. My Motherboard is an ASUS A8N-SLI with nVidia nForce 4 chipset (for an Athlon 64X2, somewhat old), but my previous card was an ATi Radeon X700, so it's been working with ATI cards before. On POST, during boot I see a "Display Card" Device (Vendor ID 1002-68F9-0300) and a "Multimedia Device" (1002-AA68-0403), and when viewing the properties of the "Standard VGA", they match the device ID. Any hints? I'd really hate having to get rid of the card, and I'm sure it's not that strange what I'm trying to do...

  Read the article

• scp No such file or directory

  - by Joe

  I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

  Read the article

• Installing sqlite gem fails on AWS Linux instance with sqlite-devel libraries installed

  - by Scott

  Hi, I'm running an instance built off ami-595a0a1c. I am trying to install the sqlite3 (or sqlite) gem and it's failing with the below error: $ sudo gem install sqlite3 Building native extensions. This could take a while... ERROR: Error installing sqlite3: ERROR: Failed to build gem native extension. /usr/bin/ruby extconf.rb checking for sqlite3.h... no sqlite3.h is missing. Try 'port install sqlite3 +universal' or 'yum install sqlite3-devel' and check your shared library search path (the location where your sqlite3 shared library is located). extconf.rb failed * Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby --with-sqlite3-dir --without-sqlite3-dir --with-sqlite3-include --without-sqlite3-include=${sqlite3-dir}/include --with-sqlite3-lib --without-sqlite3-lib=${sqlite3-dir}/lib Gem files will remain installed in /usr/lib64/ruby/gems/1.8/gems/sqlite3-1.3.3 for inspection. Results logged to /usr/lib64/ruby/gems/1.8/gems/sqlite3-1.3.3/ext/sqlite3/gem_make.out Typically, this just means you need to install the development libraries and everything is cool. However, I have installed the sqlite-devel packages and still no dice. Since this is the Amazon Linux instance, I'd rather not add more repositories than the ones Amazon provides if possible. What can i do to get this thing to compile? Thanks for any insight! From a brand new instance, here's what I've done: $ sudo yum install rubygems ruby-devel $ sudo gem update --system $ sudo gem install rails $ rails new app $ cd app $ rails server Could not find gem 'sqlite3 (= 0)' in any of the gem sources listed in your Gemfile. $ sudo yum install sqlite-devel $ sudo gem install sqlite (or sqlite3 -- same result) See breakage above

  Read the article

• Windows xp recovery console without Ntfs.sys? (0x00000024 BSOD)

  - by Kalle

  I have two physical disks in a computer, for simlicity lets call them C and D. C: got Windows XP and D: got some data. The problem is that whenever i have D: connected i can't boot windows. I get some BSOD called 0x00000024/NTFS_FILE_SYSTEM. Same thing if i boot up windows with D: disconnected and then connect it once windows has loaded. The KB article about this problem says that i have to run chkdsk but i can't get to somewhere where i can run this because i get a BSOD whenever the disk is connected! Even the recovery-console BSODs if D: is connected. The final option in the KB is to boot the computer on Windows 2000 Setup disks where you edit some file to manually disable the ntfs.sys driver and then run chkdsk. The problem is that i don't have any floppy drive. Is there any way to boot the built in recovery console with ntfs.sys disabled or to burn the floppy version to a cd after you've extracted and modified it on the harddrive? Right now the Windows xp bootable floppy creator(2) is asking me which floppy drive to extract to which i can't answer because i have none :/ Other solutions to the root problem is also appreciated :) (2) ht tp://www.microsoft.com/downloads/details.aspx?FamilyID=55820edb-5039-4955-bcb7-4fed408ea73f&displaylang=en

  Read the article

• lxc bandwidth control using tc

  - by kumar

  I am trying to restrict bandwidth inside my containers. I have tried using the following commands , But I think it is not getting effective. cd /sys/fs/cgroup/net_cls/ echo 0x1001 > A/net_cls.classid # 10:1 echo 0x1002 > B/net_cls.classid # 10:2 tc qdisc add dev eth0 root \ handle 10: htb tc class add dev eth0 parent 10: \ classid 10:1 htb rate 40mbit tc class add dev eth0 parent 10: \ classid 10:2 htb rate 30mbit tc filter add dev eth0 parent 10: \ protocol ip prio 10 \ handle 1: cgroup Here A and B are containers created with this command. lxc-execute -n A -f configfile /bin/bash lxc-execute -n B -f configfile /bin/bash Whereas configfile contains only this entry: lxc.utsname = test_lxc AFter starting the container , I have started vsftpd inside container A and try to access the files using the ftp client from another machine. Then I killed vsftpd in container A and started vsftpd in container B and try to access the files using ftp client from another machine. I cannot observe any difference in performance, for that matter it is nowhere nearer to 40mbit/30mbit. Please correct me whether anything wrong here.

  Read the article

• Windows - Website unaccessible only on windows pcs in LAN

  - by DorentuZ

  For serveral days now, a website isn't accessible on a single pc in the LAN. On the other pc's, it works just fine. And it's just a single website that's not accessible as far as I know of. The website generates a timeout on every single web browser I've tried (IE8, Firefox and Chrome). However, traceroute, nmap and telnet all work just fine. I've even tried multiple user accounts and safe mode, but that didn't work either. As a side note: using a linux live cd did work and I could access the website without any problems. The hosts file is the windows default, the ip- and dns settings on the network adapter normal as well. No strange processes are running and no viruses found. According to tcpview and netstat there are connections to the domain, but every request in the browser results in a timeout.. Any idea what's happening? Update: All of the computers on the network running Windows (any version) are showing this problem now. The website is still working under linux and mac osx. So, it has to be related to some kind of windows update (although I haven't installed any on one computer in the past week, which I've set to do manual updates only)..

  Read the article

• Running git-svn with cron results in garbage in .git

  - by Paul

  I've setup a git-svn repo with cron to fetch from the svn repo daily. I have a script to do the fetching, and this is what is invoked by cron. Everything is fine with the repo, and the script works fine when executed manually. However, when it runs under cron, empty files get dropped into the .git directory. The files have names that look like they are some base64 output, e.g. juTrvjP6m8 and kcKf3hu3b4. Two of these files show up for every cron run. I thought these might be commit hashes, but they're not, git-show says it's an unknown revision. I set-up the repo as follows: git svn init http://svn.ip.addr/repo git svn fetch svn-remote My script looks like this: cd /gitsvn/dir git svn fetch svn-remote git svn push pub The last line pushes the repo to a separate (bare) public repo from which others can clone. I'm piping the output from the cron job to a file, which looks like this: fatal: unable to run 'git-svn' Counting objects: 21, done. Delta compression using up to 2 threads. Compressing objects: 100% (10/10), done. Writing objects: 100% (11/11), 59.08 KiB, done. Total 11 (delta 8), reused 0 (delta 0) To /gitpub/repo.git 360faf5..a153b0d trunk -> trunk The line "fatal: unable to run 'git-svn'" is alarming, but the fetch seems to go ahead anyway. Any suggestions? Where are these empty garbage files coming from, and how to stop them? Am I in for bigger problems in the future? BTW, I'm using git 1.6.3.3.

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >