Search Results

Search found 20336 results on 814 pages for 'connection strings'.

Page 195/814 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

  • proftpd, dynamic IP, and filezilla: port troubles

    - by Yami
    The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

    Read the article

  • Change sysout logging level for Weblogic

    - by Justin Voss
    When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

    Read the article

  • GRE Tunnel over IPsec with Loopback

    - by Alek
    I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

    Read the article

  • Networking 2 Virtual PC with one VPC as DHCP server

    - by vivek
    My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

    Read the article

  • Jboss unreachable/ slow behind apache with ajp

    - by Niels
    I have an linux server running with a JBoss Instance with apache2. Apache2 will use AJP connection to reverse proxy to JBoss. I found these messages in the apache error.log: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header [error] ajp_read_header: ajp_ilink_receive failed [error] (120006)APR does not understand this error code: proxy: read response failed from 8.8.8.8:8009 (hostname) [error] (111)Connection refused: proxy: AJP: attempt to connect to 8.8.8.8:8009 (hostname) failed [error] ap_proxy_connect_backend disabling worker for (hostname) [error] proxy: AJP: failed to make connection to backend: hostname [error] proxy: AJP: disabled connection for (hostname)25 I googled around but I can't seem to find any related topics. There are people say this behavior can be caused by misconfigured apache vs jboss. Telling the max amount of connections apache allows are far greater then jboss, causing the apache connection to time out. But I know the app isn't used by thousands of simultaneous connections at the time not even hundreds of connections so I don't believe this could be a cause. Does anybody have an idea? Or could tell me how to debug this problem? I'm using these versions: Debian 4.3.5-4 64Bit Apache Version 2.2.16 JBOSS Version 4.2.3.GA Thanks

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • MySQL – Beginning Temporary Tables in MySQL

    - by Pinal Dave
    MySQL supports Temporary tables to store the resultsets temporarily for a given connection. Temporary tables are created with the keyword TEMPORARY along with the CREATE TABLE statement. Let us create the temporary table named Temp CREATE TEMPORARY TABLE TEMP (id INT); Now you can find out the column names using DESC command DESC TEMP; The above returns the following result This table can be accessed only for the current connection and it can be used like a permanent table and automatically dropped when the connection is closed. However, you can not find temporary tables using INFORMATION_SCHEMA. TABLES system view. It will only list out the permanent tables. MySQL usually stores the data of temporary tables in memory and processed by Memory Storage engine. But if the data size is too large MySQL automatically converts this to the on – disk table and use MyISAM engine. You can also create a permanent table with the same name of a temporary table in the same connection. However the structure of permanent table is visible only if the temporary table with the same name is dropped. Let us create a permanent table with the same name Temp as below CREATE TABLE TEMP (id INT, names VARCHAR(100)); Now running the following command stills gives you the structure of the temporary table temp created earlier. DESC TEMP; You can drop the temporary table using DROP TEMPORARY TABLE command; DROP TEMPORARY TABLE TEMP; After you executed the temporary table, run the following command DESC TEMP; Now you will see the structure of the permanent table named temp In summary – If there is a Temporary Table in MySQL it gets first priority over the permanent table in the session. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Tips and Tricks, T SQL

    Read the article

  • Why would you ever set MaxKeepAliveRequests to anything but unlimited?

    - by Jonathon Reinhart
    Apache's KeepAliveTimeout exists to close a keep-alive connection if a new request is not issued within a given period of time. Provided the user does not close his browser/tab, this timeout (usually 5-15 seconds) is what eventually closes most keep-alive connections, and prevents server resources from being wasted by holding on to connections indefinitely. Now the MaxKeepAliveRequests directive puts a limit on the number of HTTP requests that a single TCP connection (left open due to KeepAlive) will serve. Setting this to 0 means an unlimited number of requests are allowed. Why would you ever set this to anything but "unlimited"? Provided a client is still actively making requests, what harm is there in letting them happen on the same keep-alive connection? Once the limit is reached, the requests still come in, just on a new connection. The way I see it, there is no point in ever limiting this. What am I missing?

    Read the article

  • New CAT5 cable run is unstable - bad jacks? Bad cable?

    - by BeemerGuy
    This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

    Read the article

  • How to debug solve 500 Internal error aws micro ec2 with suexec, Apache and php CGi

    - by Oudin
    I'm running WordPress multi-site on an amazon micro ec2 with suexec, Apache and php CGi On Ubuntu 12.04 However I've been experiencing a lot of Internal server 500 errors and I'm in the process of debugging it to find a solution. I've posted my error logs below example.com error.log: [Fri Oct 26 10:10:08 2012] [warn] [client 23.23.xxx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Fri Oct 26 10:10:08 2012] [error] [client 23.23.xxx.xx] Premature end of script headers: wp-cron.php [Fri Oct 26 10:50:04 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/ [Fri Oct 26 10:50:04 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin.php, referer: https://www.example.com/wp-admin/ [Fri Oct 26 10:58:14 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:15 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin-ajax.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:56 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:58:57 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: plugins.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:59:18 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 10:59:18 2012] [error] [client 190.213.xxx.xxx] Premature end of script headers: admin-ajax.php, referer: https://www.example.com/wp-admin/network/index.php [Fri Oct 26 11:01:49 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server, referer: https://www.example.com/wp-admin/ [Fri Oct 26 11:01:49 2012] [warn] [client 190.213.xxx.xxx] (104)Connection reset by peer: mod_fcgid: ap_pass_brigade failed in handle_request_ipc function, referer: https://www.example.com/wp-admin/ Apache Log: php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory Recipient names must be specified Recipient names must be specified php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory php (pre-forking): Cannot allocate memory [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2852 [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2851 [Fri Oct 26 10:49:33 2012] [warn] mod_fcgid: cleanup zombie process 2853 [Fri Oct 26 10:58:22 2012] [warn] mod_fcgid: process 2892 graceful kill fail, sending SIGKILL php (pre-forking): Cannot allocate memory [Fri Oct 26 10:59:21 2012] [warn] mod_fcgid: process 2894 graceful kill fail, sending SIGKILL [Fri Oct 26 10:59:25 2012] [warn] mod_fcgid: process 2866 graceful kill fail, sending SIGKILL suexec.log: [2012-10-25 16:05:36]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:09:38]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:09:51]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:03]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:06]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 18:14:35]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:27]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:29]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 20:20:31]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 21:42:12]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-25 22:56:50]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 02:34:43]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 04:25:07]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 06:35:19]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 06:40:05]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 07:22:45]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:10:05]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:49:24]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi [2012-10-26 10:49:24]: uid: (1002/username) gid: (1002/username) cmd: php-fcgi based on the logs can any determine what might be the cause of this? Thinking that it might be the micro instance I'm thinking of upgrading to a small. Any help would be greatly appreciated.

    Read the article

  • Show table gives - ERROR 2002 (HY000): Can't connect to local MySQL server through socket

    - by arn
    I am having the InnodB tables and show tables gives following error ? mysql (mydb) > show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock1' (111) ERROR: Can't connect to the server

    Read the article

  • Windows Storage Server 2003 R2 RDP Disconnection

    - by Antitribu
    I am unable to remote desktop to our Windows Storage Server 2003 R2 machine. There are a few people about with similar issues but no answers around. Symantec End Point is installed but no network protection. Using rdesktop in Linux I receive: ERROR: send: Connection reset by peer NOT IMPLEMENTED: PDU 12 ERROR: Connection closed Where the "PDU XX" number changes on each connection. In windows using the latest mstsc I receive: The connection was lost due to a network error. Try connecting again. If the problem persists, contact your network Administrator. Any ideas?

    Read the article

  • Why do I have 55 local area connections in ipconfig?

    - by RMorrisey
    Windows Vista Home Premium. I should mention that I am having no problem whatever getting an internet connection. When I type "ipconfig" in the console, I get (55!) messages of 3 lines each, listing a ton of disconnected network connections. My PC only has one network card. Each message looks like this: Tunnel adapter Local Area Connection* 55: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : These don't cause a major problem; they make it a pain, though, to fish upward and find my IP address. How can I get rid of them? Edit: Actually, a few connection numbers are randomly missing from the sequence; so, it's really more like 30 or 40 connection messages, rather than all 55. Not sure why that is, either.

    Read the article

  • If I scp a file through an intermediate server, is the file stored temporarily on the server?

    - by Blacklight Shining
    For the sake of simplicity (I find it easier to remember names than arbitrary letters), I will dispense with letters and use names to refer to the machines in this scenario. Say I have two machines, applejack and pinkie-pie, each on their own separate LANs and not in the same physical location. I also have a server, cadance, with a direct Internet-facing connection. I want to copy a file from applejack to pinkie-pie, so to avoid dealing with port forwarding and such, I set up an ssh tunnel from pinkie-pie to cadance (ssh -R etc cadance). Now I can connect to pinkie-pie from anywhere, by connecting to cadance and specifying an alternate port to use. I can also easily copy files to pinkie-pie with scp -P $that_port $some_file cadance:$some_path. My understanding of how it works is this: A secure connection is made from applejack to cadance I am authenticated to cadance A secure connection is made from applejack to pinkie-pie that spans the existing reverse tunnel and the new connection from step 1. I am authenticated to pinkie-pie Files are copied directly from applejack to pinkie-pie over this connection. Am I correct here? How secure is this approach? If I'm wrong…are files copied this way decrypted at cadance before being passed on to pinkie-pie? Is there a possibility that traces of unencrypted data could remain on cadance?

    Read the article

  • php file downloads instead of being processed with ajax on apache

    - by eagleon
    I have a small website where some content is displayed within a HTML tag using AJAX. The content is simply taken from another page on the same web site. However, sometimes instead of loading the parsed PHP file, the browser displays a download box instead. I downloaded the file and this is what it looks like a text file mixed with binary or gzipped data. I can't paste the binary stuff here, but here are some of the headers: Jul 2012 18:52:16 GMT Server: Apache/2 X-Powered-By: PHP/5.3.10 Content-Encoding: gzip Vary: Accept-Encoding,User-Agent Keep-Alive: timeout=1, max=95 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=93 ETag: "2fc857-409-4c39691c59b40" HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=92 ETag: "2fc854-3e5-4c39691b65900" HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=91 ETag: "2fc847-3e3-4c3969197d480" and large blocks of stuff like this: µàl]&BaËÜk#ìÏ

    Read the article

  • Networking problems in VMWare with wireless bridge

    - by Robert Koritnik
    Barebone data: virtualization: VMWare Workstation 6.5 (latest) Host: Windows Server 2008 x64 Guest: Windows Server 2008 x86 Host network adapter: Ethernet (see comment) Host network adapter: Wireless (see comment) Guest ethernet network adapter 1: Bridged VMNet (automatic) Guest ethernet network adapter 2: Host only VMNet comment: my host has LAN and Wifi but only one at the same time. I'm either wired or wireless. Never both. So bridged connection on VM goes either via wire or air. Problem When I'm wirelessly connected on the host and I access internet within VM my connection just gets stalled (not dropped). It doesn't experience any timeout whatsoever, it just stops downloading/communicating. For instance: I start downloading a file with a browser (IE/FF/CR doesn't matter) and I have to pause/restart download when speed drops to 0. I could wait indefinitely but connection won't pick-up automatically. What did I miss in my network configuration? Update 1 I've tested this in various combinations. This works fine when host is connected via Ethernet. But when host is connected via Wifi, the connection on the guest works as previously described. It connects fine. It gets a valid IP from DHCP... Everything is cool as long as you don't start doing some intensive network traffic (ie. download a 2MB file) In this case it starts downloading and stops after a while. Speed just drops to 0B/s... Sometimes it picks up back, sometimes it doesn't. Connection still stays and works. I can ping around with no problem.

    Read the article

  • how to notify a program of another program? dll? directory? path?

    - by Brady Trainor
    I am trying to experiment with GNUS email in Emacs, in Windows (EDIT: x64 bit). I've got it to work in Ubuntu, but struggling with it in Windows. From http://www.gnu.org/software/emacs/manual/html_mono/emacs-gnutls.html#Help-For-Users I read in second paragraph: This is a little bit trickier on the W32 (Windows) platform, but if you have the GnuTLS DLLs (available from http://sourceforge.net/projects/ezwinports/files/ thanks to Eli Zaretskii) in the same directory as Emacs, you should be OK. I have downloaded and unzipped the gnutls-3.0.9-w32-bin package, but am not sure what to do with it. I have tried putting it in Program Files (x86), which is "the same directory as Emacs". I have tried putting it in the emacs-24.3 folder. I consider merging all the folders in between the two, but am hesitant as that seems a difficult troubleshoot attempt compared to my knowledge on these matters. I think Emacs needs to somehow see the gnutls binaries and/or dlls. My knowledge is limited on this. I've also struggled to understand PATHs for sometime now, and am not sure if that approach is relevant here. FYI, the emacs directory contains folders labeled bin, etc, info, leim, lisp and site-lisp. The gnutls directory contains folder labeled bin, include, lib and share. Hmm, now I'm finding lots of links on adding paths. Still, I'm skeptical that I would only add gnutls.exe path, as it seems the dlls are needed. Some additional data for Ramhound's first comment I have been attempting the (require 'gnutls) route. This seems to be the most relevant parts in the log: Opening connection to imap.gmail.com via tls... gnutls.c: [1] (Emacs) GnuTLS library not found Opening TLS connection to `imap.gmail.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com'...failed Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com --protocols ssl3'...failed Opening TLS connection with `openssl s_client -connect imap.gmail.com:993 -no_ssl2 -ign_eof'...failed Opening TLS connection to `imap.gmail.com'...failed I am not sure what "in stallion" means. Emacs seems to have installed itself in program files (x86), so I assume it is 32 bit. I can try and figure out how to double check, but did not realize I would get such fast response time, and am headed out right now. I will try merging the files later tonight?

    Read the article

  • Straight cable or cross over cable?

    - by om sai
    I have pppoe internet connection. My ISP provides connections like this: ISP->media converter(fiber)->8 port switch(TP Link TL-SF1008D)->to individual internet connection account holders (like me) Now the connection between the media converter and the switch is done using 4 pair cross over cat5 cable and I would like to connect the cable running from the switch to the router and through router to my PC. So what type of cable should I use to make the connection between the switch and the router (straight thru cable or cross over cable)? The point I am trying to make is I am able to connect to the internet using straight through cable between the switch and my PC but when I connect the same cable between the switch and the router and from router to my PC I am not able to connect to the internet. Also, if I am using the 2 pair cable (instead of 4) between the switch and the router I am able to connect to the internet but same is not true in case of 4 pair cat5 cable.

    Read the article

  • How mod_cache working with "must-revalidate" and "max-age"?

    - by Dmitriy Sosunov
    Quick question before I will explain my flow: ?an mod_cache perform revalidate with if-none-match only if max-age is expired in case if it configured in reverse proxy mode? My goal is to reduce a number of revalidation requests to our the origin server. For instance: The first request goes to the origin server and then mod_cache save a response in to the cache according to header cache-control: max-age. And only when max-age is expired then mod_cache will revalidate with if-none-match. Currently, mod_cache revalidate each request, regardless that max-age is defined or not. My configuration of Apache 2.4.3 (Windows), on linux I see the same behavior that I will show below. ServerName proxy.lo ProxyRequests Off ProxyPreserveHost Off Header set Vary "Accept, Content-Type, Content-Encoding, Accept-Language" RequestHeader set X-Forwarded-Proto "http" # modify header for user agent's Header set Cache-Control "private, no-cache, no-store, no-transform" CacheQuickHandler off CacheDefaultExpire 300 # the origin server do not provide last-modified CacheIgnoreNoLastMod On CacheIgnoreCacheControl On # the origin server define cache-control: private, no-store only for user agents # Therefore, I would like ignore those headers on the proxy server. CacheStorePrivate On CacheStoreNoStore On CacheEnable disk / CacheRoot "C:/Apache.Cache" CacheDirLevels 5 CacheDirLength 4 CacheMinExpire 15 CacheDetailHeader on CacheHeader on KeepAlive Off ProxyPass / http://origin.lo/ ProxyPassReverse / http://origin.lo/ Also, I have turned on debug log level to see how mod_cache handles a content for caching: I provided this to show that mod_proxy always decides that a content isn't fresh. Why?I provided this to show that mod_proxy always decide that a content isn't fresh. Why? max-age was provided (see below). [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(624): [client 192.168.1.100:63741] AH00698: cache: Key for entity /testpage?(null) is http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(569): [client 192.168.1.100:63741] AH00709: Recalled cached URL info header http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(865): [client 192.168.1.100:63741] AH00720: Recalled headers for URL http://proxy.lo/testpage? [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] cache_storage.c(320): [client 192.168.1.100:63741] AH00695: Cached response for /testpage isn't fresh. Adding/replacing conditional request headers. [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(414): [client 192.168.1.100:63741] AH00757: Adding CACHE_SAVE filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(448): [client 192.168.1.100:63741] AH00759: Adding CACHE_REMOVE_URL filter for /testpage [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] mod_proxy.c(1068): [client 192.168.1.100:63741] AH01143: Running scheme http handler (attempt 0) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1976): AH00942: HTTP: has acquired connection for (origin.lo) [Sun Nov 04 11:58:42.899890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2029): [client 192.168.1.100:63741] AH00944: connecting http://origin.lo/testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2151): [client 192.168.1.100:63741] AH00947: connected /testpage to origin.lo:80 [Sun Nov 04 11:58:42.901890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(2554): AH00962: HTTP: connection complete to 192.168.1.100:80 (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [proxy:debug] [pid 6492:tid 1400] proxy_util.c(1991): AH00943: http: has released connection for (origin.lo) [Sun Nov 04 11:58:42.903890 2012] [headers:debug] [pid 6492:tid 1400] mod_headers.c(800): AH01502: headers: ap_headers_output_filter() [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1190): [client 192.168.1.100:63741] AH00769: cache: Caching url: /testpage [Sun Nov 04 11:58:42.903890 2012] [cache:debug] [pid 6492:tid 1400] mod_cache.c(1196): [client 192.168.1.100:63741] AH00770: cache: Removing CACHE_REMOVE_URL filter. [Sun Nov 04 11:58:42.904890 2012] [cache_disk:debug] [pid 6492:tid 1400] mod_cache_disk.c(1318): [client 192.168.1.100:63741] AH00737: commit_entity: Headers and body for URL http://proxy.lo/testpage? cached. The first request to the origin server without mod_proxy to http://origin.lo/ GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The first response from the origin without mod_proxy HTTP/1.1 200 OK Cache-Control: must-revalidate, proxy-revalidate, max-age=30 Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:11:01 GMT Content-Length: 1877 So, I assumed that revalidation must be occur only in 30 seconds after the success response. Is't right? Let's check it:) Within 30 sec, the Google Chrome didn't perform any requests to the origin server to revalidate a request and has return the response from local cache. When max-age is expired, the Google Chrome perform a request to revalidate: GET http://origin.lo/testpage HTTP/1.1 Host: origin.lo Connection: keep-alive Cache-Control: max-age=0 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/xml If-None-Match: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and response: HTTP/1.1 304 Not Modified Cache-Control: must-revalidate, proxy-revalidate, max-age=30 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Sun, 04 Nov 2012 10:16:20 GMT As you can see, all works as expected. User agent revalidates request only when max-age is expired. Let's now try perform the folling flow though mod_proxy (see configuration above). The first request: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the response was: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:23:36 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: MISS from proxy.lo X-Cache-Detail: "cache miss: attempting entity save" from proxy.lo Connection: close Ok, let's see to the disk cache and try to see how request and response was stored. (I cut binary data) http://proxy.lo/testpage? Cache-Control: private, no-cache, no-store, no-transform Content-Type: application/json; charset=utf-8 ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Date: Sun, 04 Nov 2012 10:27:15 GMT Content-Length: 1932 Vary: Accept, Content-Type, Content-Encoding, Accept-Language Host: proxy.lo User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 X-Forwarded-Proto: http Cache-Control: max-age=300, must-revalidate X-Forwarded-For: 192.168.1.100 X-Forwarded-Host: proxy.lo X-Forwarded-Server: origin.lo Ok, what we see? We see that the first request was performed with max-age=300 & must-revalidate Ok, looks good, as for me, lets perform the next call: GET http://proxy.lo/testpage HTTP/1.1 Host: proxy.lo Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Accept: application/json Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 and the second response from mod_proxy: HTTP/1.1 200 OK Date: Sun, 04 Nov 2012 10:31:58 GMT Server: Apache Cache-Control: private, no-cache, no-store, no-transform ETag: "7cf651e2-176f-4ac1-808e-0e0c17cfd0a2" Content-Length: 1932 Vary: Accept,Content-Type,Content-Encoding,Accept-Language X-Cache: REVALIDATE from proxy.lo X-Cache-Detail: "conditional cache hit: entity refreshed" from proxy.lo Connection: close Content-Type: application/json; charset=utf-8 SO, MY QUESTION IS: WHY mod_proxy perform revalidation on each request regardless that max-age is defined? N.B. Apache 2.4.3 Thanks, I would be grateful for any help.

    Read the article

  • How to configure a MInimal Ubuntu installation?

    - by Uri Herrera
    I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

    Read the article

  • Introduction to LinqPad Driver for StreamInsight 2.1

    - by Roman Schindlauer
    We are announcing the availability of the LinqPad driver for StreamInsight 2.1. The purpose of this blog post is to offer a quick introduction into the new features that we added to the StreamInsight LinqPad driver. We’ll show you how to connect to a remote server, how to inspect the entities present of that server, how to compose on top of them and how to manage their lifetime. Installing the driver Info on how to install the driver can be found in an earlier blog post here. Establishing connections As you click on the “Add Connection” link in the left pane you will notice that now it’s possible to build the data context automatically. The new driver appears as an option in the upper list, and if you pick it you will open a connection dialog that lets you connect to a remote StreamInsight server. The connection dialog lets you specify the address of the remote server. You will notice that it’s possible to pick up the binding information from the configuration file of the LinqPad application (which is normally in the same folder as LinqPad.exe and is called LinqPad.exe.config). In order for the context to be generated you need to pick an application from the server. The control is editable hence you can create a new application if you don’t want to make changes to an existing application. If you choose a new application name you will be prompted for confirmation before this gets created. Once you click OK the connection is created and you can start issuing queries against the remote server. If there’s any connectivity error the connection is marked with a red X and you can see the error message informing you what went wrong (i.e., the remote server could not be reached etc.). The context for remote servers Let’s take a look at what happens after we are connected successfully. Every LinqPad query runs inside a context – think of it as a class that wraps all the code that you’re writing. If you’re connecting to a live server the context will contain the following: The application object itself. All entities present in this application (sources, sinks, subjects and processes). The picture below shows a snapshot of the left pane of LinqPad after a successful connection. Every entity on the server has a different icon which will allow users to figure out its purpose. You will also notice that some entities have a string in parentheses following the name. It should be interpreted as such: the first name is the name of the property of the context class and the second name is the name of the entity as it exists on the server. Not all valid entity names are valid identifier names so in cases where we had to make a transformation you see both. Note also that as you hover over the entities you get IntelliSense with their types – more on that later. Remoting is not supported As you play with the entities exposed by the context you will notice that you can’t read and write directly to/from them. If for instance you’re trying to dump the content of an entity you will get an error message telling you that in the current version remoting is not supported. This is because the entity lives on the remote server and dumping its content means reading the events produced by this entity into the local process. ObservableSource.Dump(); Will yield the following error: Reading from a remote 'System.Reactive.Linq.IQbservable`1[System.Int32]' is not supported. Use the 'Microsoft.ComplexEventProcessing.Linq.RemoteProvider.Bind' method to read from the source using a remote observer. This basically tells you that you can call the Bind() method to direct the output of this source to a sink that has to be defined on the remote machine as well. You can’t bring the results to the LinqPad window unless you write code specifically for that. Compose queries You may ask – what's the purpose of all that? After all the same information is present in the EventFlowDebugger, why bother with showing it in LinqPad? First of all, What gets exposed in LinqPad is not what you see in the debugger. In LinqPad we have a property on the context class for every entity that lives on the server. Because LinqPad offers IntelliSense we in fact have much more information about the entity, and more importantly we can compose with that entity very easily. For example, let’s say that this code creates an entity: using (var server = Server.Connect(...)) {     var a = server.CreateApplication("WhiteFish");     var src = a         .DefineObservable<int>(() => Observable.Range(0, 3))         .Deploy("ObservableSource"); If later we want to compose with the source we have to fetch it and then we can bind something to     a.GetObservable<int>("ObservableSource)").Bind(... This means that we had to know a bunch of things about this: that it’s a source, that it’s an observable, it produces a result with payload Int32 and it’s named “ObservableSource”. Only the second and last bits of information are present in the debugger, by the way. As you type in the query window you see that all the entities are present, you get IntelliSense support for them and it’s much easier to make sense of what’s available. Let’s look at a scenario where composition is plausible. With the new programming model it’s possible to create “cold” sources that are parameterized. There was a way to accomplish that even in the previous version by passing parameters to the adapters, but this time it’s much more elegant because the expression declares what parameters are required. Say that we hover the mouse over the ThrottledSource source – we will see that its type is Func<int, int, IQbservable<int>> - this in effect means that we need to pass two int parameters before we can get a source that produces events, and the type for those events is int – in the particular case of my example I had the source produce a range of integers and the two parameters were the start and end of the range. So we see how a developer can create a source that is not running yet. Then someone else (e.g. an administrator) can pass whatever parameters appropriate and run the process. Proxy Types Here’s an interesting scenario – what if someone created a source on a server but they forgot to tell you what type they used. Worse yet, they might have used an anonymous type and even though they can refer to it by name you can’t figure out how to use that type. Let’s walk through an example that shows how you can compose against types you don’t need to have the definition of. This is how we can create a source that returns an anonymous type: Application.DefineObservable(() => Observable.Range(1, 10).Select(i => new { I = i })).Deploy("O1"); Now if we refresh the connection we can see the new source named O1 appear in the list. But what’s more important is that we now have a type to work with. So we can compose a query that refers to the anonymous type. var threshold = new StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0<int>(5); var filter = from i in O1              where i > threshold              select i; filter.Deploy("O2"); You will notice that the anonymous type defined with this statement: new { I = i } can now be manipulated by a client that does not have access to it because the LinqPad driver has generated another type in its stead, named StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0. This type has all the properties and fields of the type defined on the server, except in this case we can instantiate values and use it to compose more queries. It is worth noting that the same thing works for types that are not anonymous – the test is if the LinqPad driver can resolve the type or not. If it’s not possible then a new type will be generated that approximates the type that exists on the server. Control metadata In addition to composing processes on top of the existing entities we can do other useful things. We can delete them – nothing new here as we simply access the entities through the Entities collection of the application class. Here is where having their real name in parentheses comes handy. There’s another way to find out what’s behind a property – dump its expression. The first line in the output tells us what’s the name of the entity used to build this property in the context. Runtime information So let’s create a process to see what happens. We can bind a source to a sink and run the resulting process. If you right click on the connection you can refresh it and see the process present in the list of entities. Then you can drag the process to the query window and see that you can have access to process object in the Processes collection of the application. You can then manipulate the process (delete it, read its diagnostic view etc.). Regards, The StreamInsight Team

    Read the article

  • Total newb having SSH and remote MySQL access problems

    - by kscott
    I don't often work with linux or need to SSH into remote MySQL databases, so pardon my ignorance. For months I had been using the HeidiSQL client application to remotely access a MySQL database. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 MySQL host: theHostnameOfTheRemoteServer.com MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

    Read the article

  • Networking - intermittent, slow speeds

    - by jack
    Hi all I'm a novice when it comes to networking. I live in a large two storey building that used to be a school and we have an internet connection with BT (british telecoms provider), the connection speed is 12Mb.. Basically our connection is slow and very intermittent and I was wondering if anybody here could provide some help or ideas. There are about 11 people in the building who could be online at any time. We have a router on the ground floor which is bog standard supplied by BT. To provide Broadband access to the 1st and 2nd floors, we used an old switch that the school left, we have a cable running from the router on the first floor to the switch which connects to a wireless router which is configured as a bridge on the 2nd floor supplying broadband access to the 1st and 2nd floors. Additionally we have 3 computers that are connected via the switch through the ethernet sockets left by the school on the ground floor. The router we use on the 2nd floor came in a pack of 2 and cost about £15 (bought by another person). Sometimes the connection is perfectly fine, i.e. early hours of the morning or when everybody is out, we have rang BT who say that the connection cannot cope with the numbers of people online, plus I'm not sure whether each person is streaming etc. Can anybody offer any advice?

    Read the article

  • Unable to use Gmail in Thunderbird 3

    - by Jatin Ganhotra
    Mozilla Thunderbird v.3.1.7 I am trying to setup Gmail, but none of the settings are working. I have tried every resource: Blogs, tutorials Instructions by Google Instructions by Thunderbird Questions here But, still its not working. My settings are as follows Server Settings Server Type: IMAP Mail server Server Name: imap.gmail.com Username: [email protected] Port: 993 Default: 993 Connection Security: SSL/TLS Authentication method: Encrypted password Outgoing server (SMTP) Server Name: smtp.gmail.com Port: 587 Default: 25 Connection Security: STARTTLS Authentication method: Encrypted password Username: [email protected] IMAP is enabled in my Gmail settings. ERROR: Connection to the server [email protected] timed out. I am behind a proxy server and I have configured those settings under: Thunderbird Preferences - Advanced - Network and Disk Space - Connection Settings - Manual Proxy Configuration The proxy configuration works, as when I created a Blogs and News feeds a/c, it was working properly and fetching the feeds for me. So, Thunderbird is configured properly as per the proxy settings. Help me.

    Read the article

  • Debugging "clogged" TCP connections

    - by Nikratio
    I'm having trouble with an internet connection that seems to randomly "freeze" arbitrary tcp connections. The connections stay established, but no data is coming through. When this happens, netstat still shows the connection status as ESTABLISHED on both the local computer: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 53 192.168.0.10:41129 173.255.235.238:143 ESTABLISHED 8219/gnutls-cli on (79.31/13/0) ..and the remote server: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer tcp 0 0 173.255.235.238:143 68.5.174.98:41129 ESTABLISHED 5303/imapd off (0.00/0/0) However, it seems that no data at all is transferred. If I run strace on the local and remote process, both just show a repeating sequence of select calls (with different fds of course), e.g. select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) select(6, [0 5], NULL, NULL, {0, 50000}) = 0 (Timeout) The internet connection overall does not seem affected, I can still establish new connections to the same service on the same server without any problems. However, the affected local applications seem to be unaware of the problem and just hang. When I look at a packet capture of this connection on the client side, the last thing that happens is that the client transmits some data, then nothing happens for about 1100 seconds, and then several TCP Retransmission requests go out, with intervals increasing from 4 seconds to 130 seconds. No activity is captured after that. After about 10 minutes, the connection on the remote end disappears from the netstat (I wasn't able to catch any intermediate state), but still stays ESTABLISHED on the local end. Finally, after some more minutes, the local application aborts with a timeout and disappears from the local netstat output as well. Does anyone have a suggestion of how I could debug this further to find out where the problem lies and how to fix it? Additionaly and/or as a temporary workaround: is is there some way to globally reduce the timeout on client and/or server to reduce the time before the local application aborts?

    Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >